Adecco First Shift Hours Jobs in Usa
17,143 positions found — Page 8
Shift: 2nd Shift (Hours: Start- 2 pm, End- 10:30 pm to 12:30 am)
Pay: $26.95 (Plus a $1 Shift Premium)
Sign-On Bonus: $3,000
A Welding Test (MIG and TIG) Will Be Required and Conducted During The In-Person Interview. Must Pass to be considered for the position.
Perform a variety of activities to weld, wrap, foam, and assemble evaporator hoppers, barrels, and parts. Work from blueprints, process sheets, and schedules. Organize required materials to complete required assemblies on a timely basis within engineering specifications. Establish and maintain a lean pull system for the finished evaporator from barrel welding through final foaming. According to proper procedures, set and operate a wide variety of mechanical equipment including, but not limited to welding, grinding, wrapping, extruding, spot welding, facing, polishing, and foaming equipment. Schedule others to meet the lean pull demand. Observe and report malfunctions, improper fits, or operating difficulties, and take corrective action as instructed. Perform own material handling and follow good housekeeping and safety practices. Perform other activities as required. Must pass welding and brazing qualification tests.
A Welding Test (MIG and TIG) Will Be Required and Conducted During The In-Person Interview. Must Pass to be considered for the position.
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights notice from the Department of Labor.
SUMMARY: To process various products on a variety of CNC equipment and/or cells.
ESSENTIAL DUTIES AND RESPONSIBILITIES: RESPONSIBILITIES include the following. Set up, adjust and operate a wide variety of numerically controlled machines and or cells, to perform rough and finish operations on a wide variety of casting, forgings and parts of copper, aluminum, steel graphite and other ferrous or non-ferrous metals and alloys. Work from programs, operational data and set up instructions. Manually perform deburring operations during cycle by hand sanding, belt sanding or operate single drill press and cleaning equipment to perform secondary operations. Use other hand tools, as necessary to maintain required quality. Will assist in training when needed. Other duties may be assigned.
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE: Associate's degree (A. A.) or equivalent from two-year college or technical school; or three to five years related experience and/or training;. or equivalent combination of education and experience.
MATHEMATICAL and/or COMPUTER SKILLS: Ability to calculate figures and amounts such as proportions, percentages, area, and circumference. Ability to apply concepts of basic algebra and geometry. Knowledge of computer operation and related software required.
REASONING ABILITY: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
CERTIFICATES, LICENSES, REGISTRATIONS: Operate fork lift truck (will be licensed in accordance with OSHA power industrial truck operator requirements.)
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must regularly lift and or move up to 10 lbs. and occasionally lift and/or move up to 100 lbs. with the use of jib cranes and other moving and lifting devices.
While performing the duties of this job, the employee is regularly required to stand and reach with hands and arms. The employee frequently is required to sit and use hands to finger, handle, or feel. The employee is occasionally required to walk; stoop, kneel, crouch, or crawl; and talk or hear.
WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. It is the employee's responsibility to properly utilize all required safety equipment and apparel at all times.
While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and fumes or airborne particles. The employee is occasionally exposed to loud continuous noise and vibration. The noise level in the work environment is usually moderate.
OTHER DUTIES AND RESPONSIBILITIES: Detect quantity discrepancies, defective material, unusual conditions or operating difficulties and report to proper supervision. Will complete data transactions where necessary. Perform changing lubrication, cleaning and maintenance of equipment when necessary. Will maintain a clean and orderly work area at all times. A working knowledge of all job related Quality Management System operating procedures and work instructions is required.
In addition to a great pay rate, we offer 2 weeks of Paid Vacation after 6 months of employment, 11 Paid Holidays (1 that you get to pick!), 16 hours of personal paid time for those days you need to schedule time off during working hours, Health, Vision and Dental Insurances, Company Paid Life, Short and Long Term Disability, 401k, and Profit Sharing.
All candidates who receive a written offer of employment will be required to undergo drug testing for commonly abused controlled substances as well as a physical.
Electric Materials Company provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
Job Title: 1st Shift Manufacturing Supervisor
Company: ClearPath Medical
Location: Tustin, CA
Employment Type: Full-time
Salary: $21–$27/year (DOE)
Shift Schedule & Coverage Expectations
This role provides leadership coverage for first-shift manufacturing operations and requires flexibility to support business needs while maintaining a sustainable schedule.
· Standard Schedule:
Monday through Friday, 5:20 AM – 1:50 PM
· Weekday Overtime Coverage:
As needed, the shift may start as early as 3:30 AM to support production continuity, issue resolution, or staffing needs
· Saturday Overtime Coverage:
Eight-hour shift every other Saturday, scheduled in advance to support production demands
ClearPath Medical values consistency and planning. Overtime is managed thoughtfully and communicated in advance whenever possible.
About ClearPath Medical
ClearPath Medical manufactures custom medical cable assemblies used in critical healthcare applications. Our products must meet strict regulatory, quality, and traceability requirements. We take pride in building products the right way, where compliance, documentation, and patient safety are just as important as throughput.
The Role
The 1st Shift Manufacturing Supervisor is responsible for leading production operations, balancing quality, compliance, and people leadership. This role requires the ability to work independently, make sound decisions, and resolve issues in real time, while ensuring all processes align with medical manufacturing standards.
This supervisor sets the tone for the shift by maintaining a calm, respectful, and accountable work environment, ensuring work is completed safely, accurately, and in compliance with all procedures.
Key Responsibilities
· Lead and support first-shift production teams to meet daily production goals while maintaining compliance with quality and regulatory requirements
· Ensure strict adherence to documented procedures, work instructions, and traceability requirements
· Monitor production flow and material availability, addressing issues proactively and escalating appropriately when needed
· Troubleshoot equipment, process, and personnel issues using sound judgment and root-cause thinking
· Review and ensure accuracy of production documentation, travelers, and quality records
· Maintain a strong focus on safety, cleanliness, and organization across the production floor
· Communicate clearly with the second shift, engineering, quality, and materials to ensure continuity and issue resolution
· Provide clear shift handoff reports that accurately reflect production status, issues, and follow-ups
· Coach and develop operators through consistent expectations, feedback, and support
· Address performance or conduct issues respectfully, firmly, and in alignment with company values
What We’re Looking For
· 5+ years of manufacturing experience, with at least 2 years in a supervisory or lead role
· Experience in regulated manufacturing environments (medical device experience strongly preferred)
· Strong understanding of quality systems, documentation requirements, and process discipline
· Ability to work independently and make sound decisions without constant oversight
· Proven ability to troubleshoot problems thoughtfully rather than react impulsively
· Leadership style that balances accountability with respect and professionalism
· Clear, direct communicator who can set expectations and follow through consistently
· Comfortable using ERP/MRP systems and basic production reporting tools
· Availability to work 1st shift consistently, with flexibility for frequent overtime
What Success Looks Like in This Role
· Production goals are met without compromising quality or compliance
· Documentation and traceability are accurate, complete, and audit-ready
· Issues are identified early and resolved effectively using sound judgment
· The team feels supported, respected, and clear on expectations
· The shift operates smoothly, safely, and with minimal escalation
What We Offer
- $21 – $27 hourly rate based on real results and experience
- Full benefits (health, dental, PTO)
- The autonomy to run your shift as you own it, as long as the numbers and quality are perfect
ClearPath Medical is an Equal Opportunity Employer.
No phone calls, no recruiters.
Registered Nurse (RN) - 3B General Medical Unit
PT Day Shift (Hours: 7a-7p) Weekend & Holidays - per department guidelines)
Newark, DE
Christiana Care Hospital in Newark seeks a Registered Nurse (RN) for our 3B General Medical Unit to work PT Day Shift, 24-hour weekly.
The scope of services on 3B Medical encompasses a variety of diagnoses including but not limited to:
- Diabetes
- GI Bleed
- Chronic obstructive pulmonary disease
- Sickle Cell and pancreatitis diagnoses
It is a growing team that is strong in leadership and mentorship for career success.
About Us:
Our mission as an organization is to serve our neighbors as expert, caring partners in their health. We do this by creating innovative, effective, affordable systems of care that our neighbors value. This is our promise to you. As a nonprofit health system, our mission is one of service. We believe that the key to providing truly great health care is to partner with our patients and their families, building a system of care that is effective, affordable, and valuable to everyone who is touched by it.
ChristianaCare Offers:
- Full Medical, Dental, Vision, Life Insurance, etc.
- Two retirement planning offerings, including 403(b) with company contributions.
- Generous paid time off with annual rollover and opportunities to cash out.
- 12-week paid parental leave.
- Tuition assistance
- Incredible Work/Life benefits including annual membership to , access to backup care services for dependents through , retirement planning services, financial mentor, fitness and wellness reimbursement, and great discounts through several vendors for hotels, rental cars, theme parks, shows, sporting events, movie tickets and much more!
Education & Experience Requirements:
- BSN preferred.
- ADNs required. Candidates are required to commit to obtaining a BSN within three years of the hire date.
- RNs must have at least one year of experience.
- RNs with 1-2 years in acute care or sub-acute care experience is preferred.
- BLS required.
Christiana Care Health System is an equal opportunity employer, firmly committed to prohibiting discrimination, whose staff is reflective of its community, and considers qualified applicants for open positions without regard to race, color, sex, religion, national origin, sexual orientation, genetic information, gender identity or expression, age, veteran status, disability, pregnancy, citizenship status, or any other characteristic protected under applicable federal, state, or local law.
Date Posted:
2026-01-22Country:
United States of AmericaLocation:
US-CT-MIDDLETOWN-220A ~ Aircraft Rd ~ BLDG 220APosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.Security Clearance Type:
None/Not RequiredSecurity Clearance Status:
Not RequiredPratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.
At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?
What You Will Do:
Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 3rd shift.
3rd shift hours are Monday through Friday from approximately 11:00 pm to 7:00 am.
In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.
Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.
Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.
Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.
Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.
Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.
May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.
Qualifications You Must Have:
High School Diploma or GED equivalent with 6 months of machining experience
In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date: Mar 19, 2026
Location: San Antonio, TX, US, 78219
Work days/Shift Hours Monday-Friday 9 PM-Complete.
Compensation: Starting pay ranges from $24.53 to $33.51 per hour, based on experience. Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits.
General PurposeResponsible for operating various manual and automated equipment in the production process.
Duties and Responsibilities- Set up machinery ensuring all production material are available
- Assist with change overs as necessary.
- Safely operate and monitor all equipment.
- Visually inspect production run and report malfunctions to maintenance department.
- Maintain required records.
- Maintain cleanliness of assigned area.
- Ensure compliance with regulatory and company policies and procedures.
- Education: High School - GED or Diploma required. Bachelor's Degree preferred
- Experience: 1+ years general sales experience required.
- 2+ years sales and customer service specific experience preferred.
- Ability to periodically lift, push, pull 50+ pounds, stand, walk, kneel, bend and reach.
Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain Texas or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Coca-Cola Southwest Beverages. Please inform us at if you need assistance completing this application or to otherwise participate in the application process.
Coca-Cola Southwest Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.
Medicus is partnering with a facility just 30 minutes from Los Angeles, California, that has an opening for a Teleradiologist to provide short-term locum coverage.
Opening Details:
- Schedule: Monday-Friday, 3 hours per day
- No call requirement
- Setting: Remote
- Daily Volume: ~100 over reads (25-30 ultrasounds, remaining are plain film)
- Must be board-certified
This remote opportunity is ideal for a skilled Radiologist looking to provide short-term coverage from the comfort of their own home.
If you are interested in learning more, please apply.
RAD - 72577
Benefits
Work with a dedicated recruiter invested in your success.
Gain access to leading hospitals and healthcare facilities nationwide.
Maximize earnings with competitive pay rates.
Have peace of mind with comprehensive malpractice coverage.
Receive expert support from our in-house team for licensing and credentialing.
Enjoy complimentary travel and lodging arranged by our dedicated travel team.
Experience simplified assignment management and timesheet submittals via the Medicus Portal.
Unlock exclusive perks by joining the My Medicus Loyalty Program after your first shift.
About Medicus
Medicus Healthcare Solutions is the 4th largest locum tenens staffing firm in the United States. We have been partnering with top talent in the healthcare industry since 2004. Our team will work with you to find the best opportunity that fits your profile as well as your professional goals, needs, and lifestyle preferences.
California
Ready to join the locum tenens lifestyle?
Complete our quick job application to get started!
Job Description
Come for the Flexibility, Stay for the Culture
Needing more 'life' in your work-life balance? Apply to our talent network today!
BAYADA Offers Our Registered Nurses:
- One on one care
- Flexible scheduling based on your preferences
- Weekly pay
- Preventive Care Coverage for ALL employees (PRN included)
- PTO
- Short commute times – we match you with cases nearest you
- Medical, Dental, and Vision benefits
- Company-paid life insurance
- Employee Assistance Program
- 401K
- Career advancement and training
BAYADA Home Health Care was founded on the principle that health care gets better when clients get better care at home—the place they most want to be. Delivering care is our highest priority and greatest joy.
How we prepare our RNs for success:
- Paid training from day 1 in the office, in the home, and online
- Practice with award-winning adult and pediatric Simulation labs
- 24/7 on call clinical support
- Electronic charting using AlayaCare
We care for clients of all ages, diagnoses, and acuity levels. We offer a multitude of paid training to our nurses to feel comfortable and competent prior to working their first shift.
Available RN Shifts:
- Night Shifts
- 8’s, 10’s, or 12’s (full shift work)
- PRN, Part-Time, or Full-Time
- No weekend or minimum requirements
The New Nurse Experience at BAYADA
- Our office prides itself on delivering an excellent and smooth candidate experience from your first phone call to your first shift! Our new hires enjoy a Welcome Day Experience to ensure nurses feel comfortable and supported.
Requirements:
- Current valid nursing license in the U.S.
- Graduation from a qualified nursing program
MAR-WPA
As an accredited, regulated, certified, and licensed home health care provider, BAYADA complies with all state/local mandates.
BAYADA is celebrating 50 years of compassion, excellence, and reliability. Learn more about our 50th anniversary celebration and how you can join in here.
BAYADA Home Health Care, Inc., and its associated entities and joint venture partners, are Equal Opportunity Employers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other similarly protected status in accordance with federal, state and local laws. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities.
2026-01-23
Country:
United States of America
Location:
US-MN-BURNSVILLE-MEMS ~ 14300 Judicial Rd ~ MEMS BLDG
Position Role Type:
Onsite
U.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
Security Clearance Type:
DoD Clearance: Secret
Security Clearance Status:
Active and existing security clearance required after day 1
Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology.
Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market.
3rd Shift Schedule: Friday - Sunday, 6:00am-6:30pm
*Training is required during first shift (Monday - Friday 6:30am - 3pm) for the first 2 - 3 months.*
What You Will Do:
- Production Machining
- Capable of set-ups, inspections, blueprint reading, and production processes.
- Set up machines to perform operations within its capability by positioning, aligning, securing work, utilizing, and adapting appropriate tools.
- Demonstrate the analytical skills that are necessary for machine adjustments and performing the machining process.
- Demonstrate proper use of inspection equipment including indicators, micrometers, calipers, and surface plates.
- Inspect and certify own work.
- Work independent with minimal support for problem solving.
- Upkeep of production equipment.
- Perform daily, quarterly, annual PM on equipment.
Qualifications You Must Have:
- Typically a HS diploma with a minimum of 2 years of relevant experience.
- The ability to obtain and maintain a U.S. government issued security clearance is required.
- U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
Qualifications We Prefer:
- Machinist Technical School Certificate/Diploma.
- 2+ years of CNC Mill/Lathe experience.
- Mazak Mazatrol experience.
- Production manufacturing experience.
- Current holder of U.S. government issued security clearance
- Experience using analytical and problem-solving skills to effectively identify and resolve issues and mitigate risks.
- Proficiency in reading and understanding blueprint and technical documentation.
- Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams to achieve operational goals.
- Collins Enterprise Values including Safety | Trust | Accountability | Respect | Collaboration | Innovation.
What We Offer:
3rd Shift Schedule:
Friday - Sunday, 6:00am-6:30pm
*Training is required during first shift (Monday - Friday 6:30am - 3pm) for the first 2 - 3 months.*
Some of our competitive benefits package includes:
- Medical, dental, and vision insurance
- Three weeks of vacation for newly hired employees
- Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
- Employee Scholar Program, tuition reimbursement program
- Life insurance and disability coverage
- Optional coverages you can buy: Pet Insurance, Home and Auto, additional life insurance, accident insurance, critical illness insurance, group legal
- Ovia Health, fertility and family planning
- Employee Assistance Plan, including up to 5 free counseling sessions
- Incentives for a Healthy You
- Bright Horizons, back-up child / elder care and college coach resources
- Autism Benefit
- Doctor on Demand, virtual doctor visits
- Adoption Assistance
- Teladoc Medical Experts, second opinion program
- And more!
Learn More & Apply Now!
Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market.
Avionics delivers advanced cockpit displays, vision systems, and comprehensive digital solutions for global government, commercial and business aviation customers. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management. Join us in creating solutions that connect the world, one flight at a time. Start your application today.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings.
At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again.
Apply now and be part of the team that's redefining aerospace, every day.
The hourly range for this role is $21.38 - $40.10. The hourly range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Pay:Weekly pay starting at $20.25 and benefits available.
Responsibilities:
- Unload containers by hand, repalletize products, and load into warehouse racks or semi trucks.
- Ensure product is sorted, baled, weighed, loaded and recycled based on customer specifications
- Operate equipment to move materials throughout the warehouse
- Maintain a clean and organized work environment to optimize efficiency.
- Collaborate with team members to complete tasks and meet daily goals.
- Follow all safety guidelines and protocols to ensure a secure work environment.
Qualifications:
- Ability to lift up-to 50 lbs repeatedly during entire shift.
- Must be capable of standing for the entire duration of the shift and walking throughout the warehouse.
- Ability to follow both verbal and written instructions accurately.
- Strong work ethic and a commitment to attendance.
- Willingness to work in a fast-paced and physically demanding environment.
How to Apply:For instant consideration for this First Shift Warehouse Production Worker job in Goodyear, AZ, click on Apply Now! - We are urgently hiring and eager to welcome motivated individuals to the Inergroup family.
