Ace Hardware Jobs in Usa

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Effector Digital Products (EDP) department designs digital electronic circuit cards and electronic units which are supported from proposal through transition to production. Our systems are subject to environments ranging from the frigid, sub-zero vacuum of space to the blistering heat of the desert floor, to the high pressures of the ocean depths.

The Digital, RF and Power Team is seeking a Principal Digital Design Engineer with digital electronics design and analysis skills to join our team. 

This position is 100% ONSITE in Tucson, Arizona.

What You Will Do

We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology to design digital electronics circuits that implement missile guidance, video and digital signal processing. Our technology base includes high-speed digital electronics, configurable logic, and homogeneous / heterogeneous multiprocessor designs.

The Principal Digital Design Engineer is responsible for the design, analysis, simulation, test, and integration of digital electronic modules and/or CCAs for Missile applications. The candidate should be experienced in all aspects of circuit card design including:

• hardware designs with processors

• FPGAs

• memory

• industry interfaces, such as PCIe, Ethernet, I2C, SPI, and UART

Qualifications You Must Have

• Bachelor’s Degree in Electrical Engineering, Computer Engineering or Electrical Engineering Technology.

• Minimum of 8 years of engineering digital circuit design experience to include at least 2 of the following:

  • Development and design of electronic circuit designs, multi-assembly system/unit design

  • Ability to take a design concept from the block diagram or requirements level to development of a complete hardware design, and verification via test and integration

  • Experience with PCB design process and expertise in tools used to design (schematic capture), analyze and simulate designs prior to hardware execution.

• The ability to obtain and maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizen are eligible for a security clearance

Qualifications We Prefer

• Master’s degree in Electrical Engineering

• Experience with embedded test techniques, design for test, design margin analysis and design for production for complex circuit card assemblies between 16 and 32 layers

• Experience using Mentor Graphics Design Creation (Siemens EDA) tools: DxDesigner, xDX Designer VX, and Xilinx (Zynq Ultrascale, Vivado, Atrix)

• Experience using PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)

• Constraint Editor System (CES)

• Experience with FPGA code development or software

• Experience leading a program transition from development to production

• Experience managing technical/schedule risks to identify cost reduction opportunities to meet assigned deadlines

• Experience with intellectual property generation (patents & publications)

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role:

Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: position is in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round.

Tucson, AZ: ,-az-location

#LI-CV1

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Raytheon combines our vast resources and investments and is dedicated to solving mission-level vs. product-level customer challenges – together we can anticipate more, move faster, and make a bigger impact on the big picture.

This position is 100% on site in Tucson, Arizona

The Test Equipment Engineering (TEE) team within the Specialty Engineering Directorate is a multi-discipline organization responsible for developing advanced windows application solutions for all Raytheon products. We are hands-on, designing with the latest technology and tools, and integrating state of the art software solutions with the most advanced engineering systems in the world.  TEE products are in engineering labs, in the field, and in production environments utilized for weapon system products. TEE has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and post-production sustainment.

This position is focused on the design, development, integration, and maintenance of software as a part of on-site factory support of systems to support weapon system product development. The selected candidate will develop applications, libraries, and instrument drivers using the software style, development language, and integrated development environment specified by the organization.

The selected candidate will contribute to multidiscipline engineering teams. Typical work involves the development of both engineering and production equipment, environments, and systems. As such, the candidate will contribute to the completion of all stages of product development for RMD weapon system products. They will be expected to work, either as a part of a team or independently, to design, develop, and implement system level applications in support of producing and maintaining weapon system products.

What You Will Do:

• Design, develop and integrate object-oriented software applications using C#, C++ in Microsoft Visual Studio in a Windows Operating System (OS)
• Prioritize and handle multiple software engineering tasks concurrently
• Troubleshoot software and test equipment instrumentation
• Work in a multidiscipline engineering team environment
• Develop and derive requirements for software products
• Lead and mentor junior software engineers

Qualifications You Must Have:

• Typically requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM) and minimum 8 years prior relevant experience, or an Advanced degree in a related field and minimum 5 years experience.
• Experience in developing and integrating software applications using programming languages including but not limited to C++, C#, Java, Python or Visual Basic.
• Experience in utilizing integrated development environments and debugging tools to troubleshoot software implementation and ensure integrity of the software products.
•  Prior experience in Windows Operating System and Microsoft Visual Studio is required.
• Prior experience in laboratory test instrumentation, electronics, and software (Ex. oscilloscopes, power supplies, digital multimeters)
• Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer:

• Experience with computer architecture and computer hardware optimization techniques
• Experience of the development of software drivers for the operation of computer hardware interfaces
• Experience in common computer hardware interface and data protocols such as TCP/IP, UDP, or RS-422
• Experience with Unified Modeling Language (UML) to visualize software architecture and design
• Experience in software development lifecycles, such as Waterfall and Agile
• Experience with Software Configuration Management principles
• Experience with Microsoft Azure DevOps Server or GitHub
• Written and interpersonal communication skills
• Experience in leading teams/projects in a technical capacity

What We Offer:

Whether you’re just starting out on your career journey or are an experienced professional, we offer a robust total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the superior benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance, and child/adult backup care.

Learn More & Apply Now!

• Onsite: Employees who are working in Onsite roles will work 100% onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  
• Tucson, AZ: ,-az-location

#TestEngineering

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

System Safety / Human System Integration (HSI) Department ensures our products Safety and Human Factors disciplines are incorporated into all our engineering and program execution to provide for our customers critical needs.  Location: Aurora, CO

What You Will Do

This is an exciting opportunity for a highly motivated Senior System Safety Engineer to join our team.

As aSenior System Safety Engineer, your responsibilities will include:

• Developing and implementing one or more MIL-STD-882E compliant system safety programs
• Performing MIL-STD-882E System Safety Program tasks and analyses, or customer’s approved equivalent
• Coordinating with customer safety representatives, applying methods, standards, and techniques to provide clarification of system requirements to software, hardware, and test personnel to ensure design and architecture considerations are appropriately allocated to the system and horizontally integrated across the development teams
• Coordinating with customer safety representatives to gain safety approval from appropriate Safety Review Board authorities
• Working across all integrated product teams and lines to properly eliminate hazards or provide effective controls
• Collaborating with Program Management and government approval authorities from program startup through production to demilitarization and disposal backgrounds
• Performing System Safety planning, hazard analyses, and design analyses
• Briefing safety considerations at technical reviews and as part of the safety approval process
• Interpreting system requirements, customer specifications and military standards
• Preparing internal and customer reports describing various analyses relevant to the System Safety program
• Collaborating across multiple disciplines to gain a full understanding of product architecture and design
• Interfacing with other engineering functions: Systems Engineering, Software or Firmware Engineering, Electrical Engineering, Hardware Engineering
• Managing System Safety Working Group(s) between key Raytheon and Customer representatives
• Ability to work on Special Access Program(s)

Qualifications You Must Have

• Typically requires a Bachelor’s in science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of prior relevant experience
• Experience with System Safety Engineering and/or Software Safety Engineering
• Experience with complex systems and evaluating them for risk
• An active and transferrable final U.S. government issued Top Secret security clearance is required prior to start date. US citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Experience developing and implementing MIL-STD-882E System Safety Program tasks and analyses, involving management (task series 100), analysis (task series 200), evaluation (task series 300), and verification (task series 400).  This includes hardware and software safety related tasks 
• Experience with DoD System Safety Programs e.g. MIL-STD-882 / DO-178
• Experience with presentation skills
• Experience solving complex problems by leveraging available resources and research material
• Experience with Earned Value Management Systems (EVMS) and Proposal Development
• Experience interfacing with Human Systems Integration showcasing execution of Human Factors Engineering tasking involving MIL-STD-1472. 
• Experience with Engineering Change Proposals, Engineering Review Boards, System Safety Working Groups

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligible

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• This position requires the ability to obtain security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  
• Relocation Eligible

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

An Electronics Lab Assembly/Solder Technician is responsible for assembling, cabling, and validating complex testing rack test systems. This includes building and repairing cables and connector assemblies as a critical part of the role. Additional responsibilities include assembling and configuring rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance. Additional activities may include basic soldering, fabricating test boxes, or supporting other hardware integration tasks.

The candidate may provide on-the-job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership. The candidate will comply with the company’s FOD program, tool control program, and all safety regulations.

Work primarily includes cabling and assembly of Rack-mounted Test Systems but may also include working with Engineering prototyping.

This position is 100% onsite in Huntsville, Alabama

What you will do

• Assemble and configure rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance.
• Perform other activities such as basic soldering, building or repairing cables and connector assemblies, or fabricating test boxes.
• Perform pin crimping, wire routing, and use hand and powered tools.
• Test and troubleshoot systems using multimeters and other diagnostic tools.
• Provide on the job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership.
• Perform physical tasks such as retrieving, storing, and installing equipment.
• Work from detailed assembly drawings, schematics, or work instructions.

• Work from verbal instructions and conceptual ideas to a achieve a desired output.
• Recognizing failures and isolating problems and suggesting appropriate corrective action.
• Keeping management appraised of all unresolved and/or potential problems that would negatively affect schedules or quality.
• Manage inventory, paperwork, and maintain organizational standards.

Qualifications You Must Have

• High School Diploma or equivalent (GED) and A minimum of 2 years of work experience.
• Assemble and configure rack-mounted test systems, cables, and harnesses
• Verification/Inspection experience with associated standards, processes, and documentation.

Qualifications Preferred

• Work experience with mechanical and soldering standards, processes, and documentation.
• Experience working within an Engineering Technical Support Environment.
• Ability to read and comprehend instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents.
• CCA manufacturing experience.
• Knowledge of Fabrication Standards, Processes, and Documentation.
• IPC J-STD-001 solder certification and IPC 610 and IPC 620 certifications
• Associates Degree in a Technical field.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

‒ Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information

Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon Missiles & Defense, you have the opportunity to try new things and make a bigger difference across a broader end-to-end solution, a richer technology and product set, an expanded range of disciplines, a growing global footprint and a more diverse team of colleagues and customers.

An Electronics Lab Assembly/Solder Technician is responsible for assembling, cabling, and validating complex testing rack test systems. This includes building and repairing cables and connector assemblies as a critical part of the role. Additional responsibilities include assembling and configuring rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance. Additional activities may include basic soldering, fabricating test boxes, or supporting other hardware integration tasks.

The candidate may provide on-the-job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership. The candidate will comply with the company’s FOD program, tool control program, and all safety regulations.

Work primarily includes cabling and assembly of Rack-mounted Test Systems but may also include working with Engineering prototyping.

This position is 100% onsite in Huntsville, Alabama

What you will do

• Assemble and configure rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance.

• Perform other activities such as basic soldering, building or repairing cables and connector assemblies, or fabricating test boxes.

• Perform pin crimping, wire routing, and use hand and powered tools.

• Test and troubleshoot systems using multimeters and other diagnostic tools.

• Provide on the job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership.

• Perform physical tasks such as retrieving, storing, and installing equipment.

• Work from detailed assembly drawings, schematics, or work instructions.

• Work from verbal instructions and conceptual ideas to a achieve a desired output.

• Recognizing failures and isolating problems and suggesting appropriate corrective action.

• Keeping management appraised of all unresolved and/or potential problems that would negatively affect schedules or quality.

• Manage inventory, paperwork, and maintain organizational standards.

Qualifications You Must Have

• High School Diploma or equivalent (GED) and A minimum of 4 years of work experience.

• Assemble and configure rack-mounted test systems, cables, and harnesses

• Verification/Inspection experience with associated standards, processes, and documentation.

Qualifications Preferred

• Work experience with mechanical and soldering standards, processes, and documentation.

• Experience working within an Engineering Technical Support Environment.

• Ability to read and comprehend instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents.

• CCA manufacturing experience.

• Knowledge of Fabrication Standards, Processes, and Documentation.

• IPC J-STD-001 solder certification and IPC 610 and IPC 620 certifications

• Associates Degree in a Technical field.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

‒ Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information

Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is hiring for Electronic Systems Engineer (Lead or SME) to join the 787 Electronic Systems (Avionics, Integrated Modular Avionics, Network Systems, & Electrical Subsystems) team located in North Charleston, South Carolina.

As a member of the Electronic Systems team at BSC, you will develop and support these systems and their components in a sustaining production environment. Project examples include addressing design obsolescence, developing product improvements, supporting production build and test, supporting new customer introduction, and supporting the in-service fleet.

Position Responsibilities:

• Leads work with customers to develop and document complex electronic and electrical system requirements.
• Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Leads work to test and validate to ensure system designs meet operational and functional requirements.
• Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Researches technology advances for potential application to company business needs.
• Makes recommendations for technology investments.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics or Chemistry.
• 14 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications.

Preferred Qualifications (Desired Skills/Experience):

• ABET accredited degree
• Experience with DO-254 Airborne Electronic Hardware Development & Qualification
• Experience with DO-297 Integrated Modular Avionics Development & Qualification
• Experience with ARP-4754 Systems Development & Qualification
• Experience with DO-178 Airborne Software Development & Qualification

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range Lead (Level 5): $164,900 - $223,100

Applications for this position will be accepted until Apr. 16, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Air Defense Ground Equipment (ADGE) Department leads mechanical design, development, and integration of platform systems. This includes shelter systems, hardware integration, cable & interconnections, as well as facility development, and site integration. The department is comprised of individuals with technical expertise and experience in hardware design, integration, and production support. 

The ADGE department is looking for a full-time Sr. Principal Mechanical Engineer to support Patriot Missile Change Control Board (CCB) for major components and sub-assemblies, including obsolescence upgrades, procurement and supplier support

What You Will Do

• Responsibilities (Core & Day to Day) Support design specification development through production qualification reviews and release including ensuring design is manufacturable
• Participate in design peer reviews and conduct trade studies to promote sound technical decisions.
• Provide responses to supplier questions related to general design expectations and interpretation of the relevant specifications​.
• Provide guidance on Raytheon expectations for design rigor, level of TDP & MDP documentation required, typical analysis approach, and other similar topics.
• Connect suppliers with Raytheon subject matter experts as required.
• Collaborate with other engineering disciplines, non-technical disciplines, and suppliers to develop robust design solutions and resolve technical challenges.
• Work with limited supervision and meet technical, schedule, and monetary commitments.
• Apply knowledge and experience in technical problem solving and hardware development in an engaged team environment.
• Drawing generation, drawing release, and drawing change incorporation

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience unless prohibited by local laws/regulation. Or An Advanced Degree in a related field and minimum 7 years experience
• Experience with ERB/CCB process; CCB chair certification or ability to be certified.
• Experience with solid modeling, creating and documenting mechanical designs in Pro/Engineer/CREO or similar modeling tools.
• Experience working within small electromechanical or gyroscope similar assembly/products.
• Experience with Geometric Dimensioning and Tolerancing (GD&T) and ASME drawing and documentation standards and procedures

Qualifications We Prefer

• Experience with materials, load bearing structures, shock/vibration/load analysis
• Experience using Computer Aided Design (CAD) tools
• Missile portfolio including reviewing trade studies, identification of suitable alternate and interchangeable materials, or design changes as needed
• Ensure technical integrity and engineering execution across the IPTs and other functions to meet cost, schedule, and technical requirements

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

The Advanced Airborne RF Sensors department within the Space and Airborne Systems Engineering and Test Capability (SE&TC) Center is seeking a Systems Engineer to join our team in North Texas. As a Systems Engineer, you will play a critical role in the integration, testing, and verification of advanced hardware and software systems. You will ensure our products meet customer requirements and perform to expectations, from initial development through deployment and post-deployment support. This dynamic role offers the opportunity to collaborate across disciplines, solve complex challenges, and contribute to cutting-edge aerospace and defense technologies. This is an Onsite role in McKinney, TX.

What You Will Do:

• Collaborate with hardware and software teams to develop test procedures and
• troubleshoot system level issues for RF and EW systems.
• Perform calibration and operation of phased array antennas within a laboratory test‑range environment.
• Support testing, validation, and integration activities for phased array antenna systems, RF sensor, and EW systems.
• Conduct modeling, simulation, and analysis to evaluate ES/EA system performance and inform design decisions.
• Create and execute test plans and procedures, evaluate system functions and interfaces, and verify system requirements in preparation for final system sell-off to the customer.
• Support production, system deployment, and post-deployment activities, ensuring product performance and reliability.
• Collaborate across hardware and software disciplines to identify and implement solutions to complex system challenges.
• Engage in Digital Transformation (DTx) efforts, leveraging methods and enabling technologies such as Model-Based Systems Engineering (MBSE) and Agile product development practices.
• Work alongside teams of engineers to support integration and testing efforts, ensuring seamless functionality of system components.
• Utilize laboratory equipment, including power supplies, oscilloscopes, and digital voltmeters.
• Test event support activity may require travel which is not expected to exceed 20%. 

Qualifications You Must Have:

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of EW/Radar systems design and requirements engineering experience.
• Diagnose and resolve electromagnetic interference (EMI) issues.
• Modeling and simulation for Electronic Warfare (EW) or radar systems.
• Experience with calibrating, operating, and supporting the integration of phased‑array or RF sensor systems.

Qualifications We Prefer

• Active DoD clearance with investigation within five years.
• Advanced degree in Science, Technology, Engineering or Mathematics (STEM preferred).
• Model Based Systems Engineering (Cameo Enterprise Architecture (SysML specifically), digital thread concepts, digital engineering, MBSE with DevSecOps).
• Antenna design and calibration experience
• Skilled in diagnosing and resolving electromagnetic interference (EMI) issues.
• Experience with modeling and simulation of EW or radar systems.
• Matlab/Simulink, DOORS, DNG, Cameo, Jira, and Confluence.

What We Offer:

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligible – relocation assistance available for this position 

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• McKinney, Texas: Raytheon North Texas Location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is hiring for Electronic Systems Engineers (Mid-Level or Lead) to join the 787 Electronic Systems (Avionics, Integrated Modular Avionics, Network Systems, & Electrical Subsystems) team located in North Charleston, South Carolina.

As a member of the Electronic Systems team at BSC, you will develop and support these systems and their components in a sustaining production environment. Project examples include addressing design obsolescence, developing product improvements, supporting production build and test, supporting new customer introduction, and supporting the in-service fleet.

Position Responsibilities:           

• Works with customers to develop and document complex electronic and electrical system requirements.
• Analyzes and translates requirements into system, hardware and software designs and interface specifications.
• Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements.
• Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Researches specific technology advances for potential application to company business needs.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics or Chemistry.
• 5 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications.

Preferred Qualifications (Desired Skills/Experience):

• ABET accredited degree
• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications.
• Experience with DO-254 Airborne Electronic Hardware Development & Qualification
• Experience with DO-297 Integrated Modular Avionics Development & Qualification
• Experience with ARP-4754 Systems Development & Qualification
• Experience with DO-178 Airborne Software Development & Qualification

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range Mid-Level (Level 3): $112,200 - $151,800

Summary Pay Range Lead (Level 4): $136,850 - $185,150

Applications for this position will be accepted until Apr. 16, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.