Ace Controls Llc Jobs in Usa
6,834 positions found — Page 3
Immediate placement available.
Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions.
Job Type: Independent Contractor
QualificationsWe are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as, the VIITA Basic Commercial Line Inspector course or its equivalent.
Full Job Description Of The Loss Control Inspector- Receives assignments electronically and reviews for inspection requirements.
- Schedules the inspection appointment with the Insured by phone, email, or text.
- Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed.
- Interviews the Insured for operations information, ages of the building systems, etc.
- Communicates inspection status through online application.
- Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos).
- 3-5 years' experience providing commercial insurance loss control inspections
- Understanding of commercial property and casualty lines: property, general liability, and worker's compensation
- Ability to work independently, manage your time effectively, and communicate well verbally and in writing
- Comfortable completing reports online and uploading documents
commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius
Helpful (But Not Required) Professional CertificationsCSP, OHST, ALCM, ARM
H&S Loss Control Inspections, Inc Company InformationWe have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions.
Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service!
We look forward to hearing from all qualified applicants!
IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion.
IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in:
Health
Dental
Vision
Life
LTD
Accident
Critical Illness
401k
Employees and their household members are also eligible to participate in the company's Employee Assistance Program.
Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work.
EOE Statement
IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training.
Description
JOB TITLE: Quality Control Inspector
JOB CODE: Quality Control
REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor.
Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job.
Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others.
Required Education: High School diploma or equivalent
Required Certification: NACE Inspector and/or SSPC NBPI required.
Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards.
Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives.
Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks.
Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.
Supervisory Responsibilities: None
Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.
Location
Newport News, VA
Salary Range
Exempt/Non-Exempt
Non-Exempt
This position is currently accepting applications.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Plan, write, and execute manual, CMM, and Vision System inspections
- Support internal customer requests for support related to inspection, measurement strategy, calibration, and other related requests.
- Identify nonconformances and collaborate with engineering and manufacturing teams to conduct root cause analysis and implement corrective actions
- Document and record inspection results and properly file hard and electronic copies
- Interpret drawings and schematics.
- Initiate nonconformance reports (NCR's) for all nonconforming material.
- Perform inspections using the microscope.
- Perform first-article reports using various inspection tools.
- Follow customer specifications to satisfy the inspection requirements of the drawing or work order instructions
- Uphold the company core values
- Other duties as assigned
SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities.
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Successful accomplishment of duties and responsibilities may require the following:
- Must have the knowledge and experience necessary for the position.
- Must be able to follow instructions and procedures and work with minimal supervision.
- Must be capable of reading drawings and inspecting the work being performed.
- Strong understanding of GD&T.
- Manual and/or CMM inspection experience.
- Experience using Height Gauges, Micrometers, Calipers, and other inspection tools.
- Practical knowledge of Microsoft Office (Word, Excel, Outlook).
- Knowledge of Epicor ERP 10 or similar Management/Manufacturing Information System.
EDUCATION and/or EXPERIENCE:
- High school diploma or general education degree (GED)
- Minimum two years of experience with Calypso Software and Zeiss CMM; five years preferred
LANGUAGE SKILLS: Ability to speak and understand basic safety and manufacturing instructions.
MATHEMATICAL SKILLS: Ability to add and subtract two-digit numbers. Ability to multiply and divide with 10's and 100's.
REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
CERTIFICATES, LICENSES, REGISTRATIONS: Authorization to work in the United States. To conform to U.S. export control regulations, you should be eligible for any required authorizations from the U.S. Government.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and hear. The employee frequently is required to use hands and fingers; handle, feel, and reach with hands and arms. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl; and smell. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly exposed to moving mechanical parts. The employee may be exposed to hot and/or cold work environments, chemicals, fumes or airborne particles, loud noises, risk of electrical shock and vibration and/or other occupational hazards; personal protective equipment may be required.
NOTE: This job description identifies the general nature and scope of work to be performed. Vitesse Systems, LLC. reserves the right to revise all or any part of this job description and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the particular job duty, except as required by Vitesse Systems Inc. This job description is subject to change based on the needs of the position and/or the company.
Vitesse Systems, LLC performs work controlled by the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). These statutes require the protection of technical data and products. The regulations require that such data not be disclosed in written, oral, or visual form to any foreign national without prior export authorization from the Department of State. A foreign national is defined by the U.S. Government under EAR 734.2(b)(2)(ii) and 8 USC 110 (a)(20) as one who:
- Is not a United States citizen
- Is not lawfully admitted for permanent residence in the U.S.
- Does not have politically protected status (embassy, refugee, or asylum)
- Has dual U.S. / foreign citizenship
Vitesse Systems, LLC is an Equal Employment Opportunity / Affirmative Action (EEO/AA) Veterans / Disabled Employer
Borealis Enterprises, LLC is seeking a Federal Construction Quality Control Manager (QCM) in Niagara, New York. The Quality Control Manager shall oversee and coordinate the planning, implementation, and supervision of the project quality control plan, including employees and outside agencies or consultants involved in inspections and testing.
Borealis Enterprises, LLC is an entity of NTVI Federal, Inc, a federal contractor engaged in construction, professional services, facility management and telecommunications, with its corporate office in Chantilly, Virginia.
Key Responsibilities (including but are not limited to):
- The Quality Control Manager (QCM) will assure, to the best of their abilities, that all materials, workmanship and construction are in full compliance with the contract, plans and specifications, and all applicable building codes.
- The QCM will conduct business in a professional and ethical manner and integrate well into the project team. The QCM is authorized to require that defective work or material be corrected or removed until made compliant.
- Submittal review and approval shall be the responsibility of the QCM including recommendations for variations, value engineering, and betterments.
- The QCM shall perform inspections as needed and shall prepare and maintain inspection and performance records daily.
- Preparatory meetings shall be held with subcontractors and all parties concerned as needed to define QC and safety policies and procedures with each newly definable feature of work.
- The QCM will also maintain current certifications for First Aid, CPR and OSHA.
Position Requirements:
- Engineering Degree Required (Civil Engineering degree preferred)
- 2+ years of field experience in the role of Quality Control Assistant Manager or 5-10 years of acceptable construction related experience – Superintendent or Assistant Project Manager or similar.
- Possess a current CQM certification
- CPR Certification Required
- Completion of OSHA 30-Hour Safety Course
- Proven competency and proficiency of position’s essential job functions, duties, and responsibilities.
- Broad-based project and management skills to lead and effectively communicate with people both internal and external to the company.
- Project experience in the $1 million to $10 million range including multi-story buildings, site work, grading, and site utilities
- Proficiency in PC-based programs including Microsoft Office, scheduling software, etc.
- Experience with Government/Military projects
- The QCM may spend part of their time at noisy production sites. In some areas, you may have to wear protective clothing or goggles. Some travel may be required.
Send your resume to
Overview:
“Together We Make Life Better”. Our quality engineering, sustainable solutions and safety record inspire everything we do. Our diverse and inclusive workforce allows for all employees to feel valued and safe to give their opinions and improve our company.
Tata Consulting Engineers USA, LLC, (TCE), is a multi-disciplinary engineering organization offering a full range of integrated engineering design, project support, procurement and construction management services to the energy and chemicals industries.
Responsibilities:
Completes work according to standard procedures on assignments from Senior Document Control clerk.
Assignments are completed efficiently and on time.
Ensures quality for completed personal work assignments.
Prepares memos, letters, meeting minutes, reports, forms and other documents using company or client word processors. Types and proofreads from dictation or draft by others.
Organizes and maintains project files under close supervision.
Operates equipment, i.e. padding machine, binding, paper cutter to produce document packages per instructions from requestor.
May operate reproduction equipment such as blueprint, high-speed copiers, offset devices, etc. to produce legible documents.
Reports to the Senior Document Control Clerk for team or group assignment and determination of standards.
May receive direction and/or work from other managers/supervisors.
Accommodates needs from all employees for file management and document processing.
Works pursuant to direction in a consistent manner according to established procedures.
May require direction to appropriately accommodate new circumstances.
Develops a familiarity with engineering, construction, and process terminology.
Uses the following office equipment, such as PC’s, printers, typewriters, fax machines, copiers, telephone equipment, and various other office machines to complete work.
Qualifications:
Holistic understanding of Document Management, Information Management, and Self-guided, confident in their field, and able to adapt/learn on the fly.
Understanding of how information technology works and how it's utilized in these instances.
Software Experience Required: Microsoft Office, SharePoint, and EDMS
Education Requirements:
Minimum of 5 years relevant industry work experience.
EEO Statement:
Tata Consulting Engineers USA, LLC (“TCE”) is an equal opportunity and affirmative action employer committed to promoting diversity, equity, and inclusion in our workplace. We do not discriminate on the basis of race/ethnicity, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, veteran's status, or any other characteristic protected by local, state, or federal laws, rules, or regulations.
In compliance with federal law, all candidates hired will be required to verify their identity and eligibility to work in the United States and to complete the required employment eligibility verification form after acceptance of a formal TCE offer letter through our onboarding system.
Fraud Alert:
Please be aware that there have been instances of fraudulent job offers being made in the name of TCE by unauthorized individuals or organizations. We want to make it clear that TCE will never ask for any type of payment information during our interview process. Please be advised all email communications from TCE will come from our business email addresses, which end in '@ '. If you receive any suspicious job-related emails from any other domain, please do not respond to them and disregard any requests for personal or financial information. If you have any concerns about the legitimacy of a job offer or communication, please contact us through our website at
Paragon’s experienced professional staff is dedicated to producing high-quality documentation and providing safe field execution to support its clients’ projects in line with local, state and federal guidelines and regulations.
About this position: Project Control Manager Location – El Paso, TX The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job.
Other duties may be assigned.
To perform this job successfully, an individual must be able to satisfactorily perform each essential duty.
The requirements listed below are representative of the knowledge, skill and/or ability required.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position.
Wage/Salary Range: $75,000 Applicants will be notified via phone or email within ten (10) business days of submittal.
Essential Duties & Responsibilities Responsible for the management of the Project Control activities including scheduling, budgeting, estimating, risk management, cost reporting & forecasting and earned value measurement & productivity reporting and oversight and audit/validation of contractors cost, progress, and schedule activities.
Lead development of project specific PC execution strategies.
Coordinate with Operations Managers and Project Managers on reporting, project control activities, and other services.
Manage development of procedures for various project control activities including budget preparation, forecasts, progress validation and related cost engineering and planning/scheduling functions.
Manage cost estimating/forecasting activities including periodic project re-estimates and cost benchmark metrics.
Facilitate and oversee the risk assessment, mitigation and contingency planning process for the project.
Ensure full integration between the estimating, cost control, planning/scheduling, and risk management functions within projects.
Participate and assist with contract administration activities.
Required (Minimum Necessary) Qualifications Education Requirements: Bachelor’s degree in applicable field.
Project Management Professional Certification.
Level of Experience Requirements: Minimum 5 years of experience in project control on large construction projects.
Knowledge, Skills, Abilities, and Other Characteristics Significant experience in construction and/or maintenance field required specializing in project controls.
Demonstrated experience and working understanding of project planning and scheduling, cost control and cost estimating.
Ability to interpret and perform analysis of cost and schedule reports and data.
Ability to work within a diverse cultural environment.
Has clearly demonstrated strong technical competence.
Experience in preparation of cost estimates.
Demonstrated capability to lead a group responsible for control of planning, scheduling, cost control and cost estimating activities.
Preferred Master’s degree in applicable field.
Experience implementing construction management software Supervisory Responsibilities This position will have supervisory responsibilities.
You may delete this line if it does not apply to the job.
DOT Covered/Safety-Sensitive Role Requirements This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions.
You may delete this line if it does not apply to the job.
Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this role.
Employees must always maintain a constant state of mental alertness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about.
Work Environment The work environmental characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of the role.
Employees must always maintain a constant state of situational awareness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Must be able to work in an office setting, sit for long periods of time, talk on the telephone, work on a computer for extended periods of time, and lift and carry up to 25 pounds on a periodic basis.
Must possess: visual acuity to review written documentation; ability to hear and understand speech at normal room levels and on the telephone; and the manual dexterity to operate a cell phone, telephone and keyboard.
Physical Setting: Job is performed in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse and multi-line telephone system.
The work described herein is primarily a modern office setting.
Schedule and Flexibility: Monday-Friday 0800 – 1700 core hours, additional time as needed Additional Qualifying Factors As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results.
If applicable to the contract, you must also obtain and maintain the appropriate clearance levels required and must also be able to obtain access to military installations.
Other Pertinent Work Details: Occasional travel may be required.
Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job.
Bering Straits Native Corporation is an equal opportunity employer.
All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.
ARM EnerTech Associates, LLC (AETA) is a wholly owned subsidiary of ARM Group Enterprises Inc. AETA is seeking a self-driven and experienced Sr. Automation Specialist / Electrical Engineer who has a strong business acumen and embodies an ownership mentality. As a Sr. Automation Specialist / Electrical Engineer, you will collaborate with a team of multi-disciplined engineers and scientist, project managers, CAD designers, and other staff to service our Northeast US based clients’ needs. This role will establish client relationships, define client needs, develop winning strategies, prepare proposals, and manage the development, design and permitting of a wide range of projects related to automation, control systems, and control panel design. The successful applicant will be a highly motivated, resourceful, well-organized, and a cooperative producer and manager that is able to meet project goals, schedules, and budgets.
Responsibilities
- Manage and coordinate the development, design, and execution of multiple projects simultaneously.
- Develop project scopes, objectives, proposals, and budgets while effectively communicating with key stakeholders.
- Oversee project schedules, coordinate with subcontractors, and manage resources to ensure timely completion within budget.
- Responsible and accountable for projects including design of industrial controls systems including PLCs, HMIs, SCADA systems, and motor drives.
- Prepare, review, and update design drawings using AutoCAD.
- Support and lead on-site Site Acceptance Testing (SAT), system startup, and training functions related to PLC & HMI hardware and programming.
- Manage projects budgets to ensure they are delivered on time and under budget.
- Collaborate with other team members to meet deliverables on projects and obtain further knowledge and experiences.
- Effectively communicate with key stake holders including project manager, project engineers, and other members of the project team.
- Pro-actively recognize conditions and problems of non-routine nature, develop solutions, and seek guidance when needed.
- Communicate and interface with clients and vendors.
- Writing technical documentation such as: Functional Descriptions, Functional Specifications, Test Documents, Reports, etc.
- Provide mentorship to junior engineers and contribute to technical knowledge-sharing within the team.
Requirements
- 10+ years’ expertise in industrial control systems, PLC/PAC programming, HMIs, VFDs, and SCADA systems.
- Proficiency in Microsoft Office Suite; experience with AutoCAD or equivalent engineering software.
- A self-starter possessing strong communication, planning and organizational skills.
- Comfortable working around energized power distribution equipment and related control systems.
- Requires travel to job sites including overnight stays to provide on-site commissioning, troubleshooting, customer support and training.
- Strong organizational and project management skills with the ability to manage multiple complex projects.
- Excellent communication and leadership skills with the ability to interact with clients and team members effectively.
- A proactive, problem-solving mindset with the ability to work independently and collaboratively.
Preferred Requirements:
- Degree in Electrical Engineering or Computer Engineering.
- Experience in Siemens and Allen-Bradley automation components.
- Knowledge of UL508A Control Panel design and standards.
Your Wellness, Our Priority: A Look at Our Benefits
We invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.
A leader in technology and innovation, Southwire Company, LLC is one of North America’s largest wire and cable producers. Southwire and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products and engineered products.
Industrial Maintenance Controls Technician
Location: Pleasant Prairie, WI
Compensation: $36 - $39 hour
Shift: Monday – Friday ~ days
Pension plan!!
As an Industrial Maintenance Controls Technician, you will support our manufacturing operations by providing a full range of electronic equipment maintenance with focus on reliability. Ensure sustainable operation of machinery and equipment by completing preventive maintenance requirements on motors, conveyor systems, and other production machinery. The Industrial Maintenance Controls Technician will also be a key member of process improvement and problem-solving teams.
Qualifications and Experience Requirements
- Associates degree or higher required
- PLC experience is required
- Strong Mechanical and Electrical background (up to 480v)
- Hydraulic and pneumatic experience
- Ability to interpret technical drawings, schematics and OEM manuals
- 5 years of industrial manufacturing maintenance experience
- Possesses strong computer skills (Word, Excel, PowerPoint, Outlook, CMMS, etc.)
Industrial Maintenance Controls Technician Job Description
- Troubleshoot equipment malfunctions using logical and systematic methodologies.
- Routine maintenance including but not limited to field fault analysis, calibration of instrumentation using proper test equipment, component replacement, alignment and calibration to specification.
- Troubleshoot and repair various equipment to include electronic, digital equipment and AC/DC motors & controls.
- Fault analysis of hard-wired relay logic, motor control circuits, motor power circuits (single & 3 phase) and common utility/lighting circuits.
- Access and use PLC logic programming to troubleshoot production equipment.
- Replacement of identified failed parts or components.
- Adjust equipment to bring it into operational specifications.
- Recommend process or procedure changes based on observed equipment behavior.
- Testing of electrical systems and continuity of circuits in electrical wiring, using testing devices such as ohmmeters, and voltmeters to ensure proper operation and safety of system.
- Install, examine, replace or repair electrical wiring, receptacles, switch boxes, conduits, lighting fixtures and other electrical components.
- Maintain current and accurate maintenance data to establish historical records and future maintenance requirements.
Benefits We Offer:
- 401k with Matching & Pension Plan (Eligible for Pension after 1,000 Hours Worked)
- Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
- Paid Time Off & Paid Holidays
- Long & Short-Term Disability
- Supplemental Insurance Plans
- Employee Assistance Program
- Employee Referral Program
- Tuition Reimbursement Programs
- Advancement & Professional Growth opportunities
- Parental Leave
- & More
Southwire is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.
Central Transport, LLC, a leader in LTL (less-than-truckload) transportation for more than 80 years is currently seeking enthusiastic, computer savvy, high-detail individuals for our corporate office in Warren, MI who are looking to begin a career or are ready to take the next step.
We are currently seeking individuals who have open and flexible availability to work Monday - Friday shifts from 3:00 PM-1:00 AM
Job Requirements:
- Excellent attendance and the ability to work the same shift each day
- Superior communication skills including: listening, speaking, reading, writing
- Strong attention to detail and sense of urgency
- Ability for detailed note taking
- Detail Oriented/Accuracy focused
- Willingness to learn
- Experience in LTL, distribution/logistics, transportation or operations is preferred, but not required.
- Organizational and work flow tracking skills
Responsibilities include, but are not limited to:
- Working to reduce the amount of incoming claims
- Reviewing pictures of freight just picked up to ensure safe transit
- Placing notes in the system to aid freight handlers in the safe movement of freight
- Determine the root causes of claims
- Applying new procedures to prevent issues in the future
Salary and Benefits:
- Competitive starting rate
- Medical/dental benefits
- 401(k)
- Paid vacation
- Life Insurance
- Opportunity for advancement
Job Type: Full-time
Pay: $50,000/Year
Benefits:
- 401(k)
- Dental insurance
- Health insurance
- Health savings account
- Paid time off
- Vision insurance
Schedule:
- 10 hour shift
- Monday to Friday
- Night shift
Work Location: In person
About The Role & Team
Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.
Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.
Ride Control Hardware Engineers work within Walt Disney Imagineering's Ride Studio in a highly collaborative environment on diverse teams. Engineering activities cover all aspects of control system design and implementation, from concept to commissioning, for a wide variety of innovative ride platforms.
The Ride Control Hardware Engineer will report to the Ride Control Systems Engineering Executive.
This is a full time role.
What You Will Do:
* Support programmable, electrical, and electronic hardware scope to design and deliver control systems for complex, innovative ride systems
* Perform engineering design and analysis for ride systems, focusing on electrical control systems
* Develop control system and network architectures
* Design, model, and analyze electrical supply systems
* Research new products, technologies, and methodologies
* Lead a team of ride control engineers and collaborate with other professionals to develop ride control systems
* Develop control equipment requirements and specifications
* Develop and implement proof-of-concept mock-ups and prototypes
* Conduct hazard assessments and failure modes and effects analysis
* Manage vendors, contractors, and consultants developing and implementing ride control systems
* Define and oversee supplier and consultant design and delivery
* Ensure all delivery and performance requirements are satisfied
* Conduct factory acceptance tests and ride system installation
Required Qualifications & Skills
* 5+ years of Controls Experience
* Experienced in fail-safe and safety-related control system design
* Extensive knowledge of control processors, components, and communication networks
* Highly proficient in industrial control system installation, integration, and commissioning
* Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
* Extensive knowledge of electrical design standards and codes, including UL508a and NEC
* Familiarity with amusement and automation industry standards, including ASTM F2291
* Expertise in motor and motion control methods and components
* Ability to travel domestically and internationally for 1-week to 3-year durations
* Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
Preferred Qualifications & Skills
* Licensed professional engineer
* Proficient with engineering design tools including AutoCAD, Matlab, Simulink, Solidworks, EPLAN
* Proficient in Rockwell and Siemens automation systems architecture and components
* Electrical and troubleshooting skills (voltmeter, oscilloscope, etc.)
* Knowledge of international amusement industry standards applicable in France, Hong Kong, or China
Education
* As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university, Electrical Engineering preferred
Additional Information :
* Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at ( ) .
#DXMedia
the hiring range for this position in Glendale, CA is $129,300.00-$173,300.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
