Engineering Jobs in Texas

Overview

We are seeking a Customer / Sales Support Specialist to lead the daily operations of our Customer Support Team. This is a critical role supporting both sales and operations, ensuring an exceptional customer experience while helping drive recurring service revenue.

You will oversee support and maintenance contracts, manage vendor relationships, assist with quoting and renewals, and identify additional service opportunities.

Key Responsibilities

• Prepare estimates and customer quotes
• Manage vendor and distributor relationships
• Oversee annual customer contract renewals
• Support and manage the Customer Service Desk
• Administer support and maintenance agreements
• Identify additional service and revenue opportunities
• Coordinate internal and external resources to support customer needs

We are seeking hardworking and professional technical personnel to join our Operations Division in Melrose Park, IL!

The Field service Technician (After Sales) in Dallas is key to the technical support of our automated storage systems equipment at our customers’ sites in the USA and Canada. Technicians are responsible for performing accurate and timely electromechanical support, training, upgrades, and repair of equipment.

Responsibilities:

• Provide advanced electromechanical support in the after-sales phase for all automated warehouse installation projects throughout the U.S. and Canada.
• Analyze and diagnose faults (controls software, electrical, mechanical, etc.).
• Make necessary modifications to PLC’s and electronic equipment.
• Test and adjust the mechanical and electrical components as necessary.
• Communicate requests to Sales for spare parts orders.
• Create quality and status reports regarding service calls.
• Communicate any issues that arise on site to the After Sales Manager.
• Train customers on technical system routine maintenance operations.
• Provide on-demand corrective maintenance services to customers as needed.

Minimum Requirements:

• 3 years of automation after-sales electromechanical service or industrial maintenance experience.
• Ability to travel (USA and Canada), 90% of the time.
• Ability to read and interpret electrical schematics and mechanical drawings.
• Knowledge related to automation controls.
• Experience with PLC programming (Siemens and Allen Bradley).
• Basic knowledge in troubleshooting frequency inverters (SEW, Lenze, KEB).
• Basic knowledge in diagnosing and troubleshooting industrial communication network connections (Profibus, Profinet, etc.).
• Excellent communication and customer service skills and presence.
• Ability and willingness to work variable hours including weekend, night, and/or holiday work.
• Ability and willingness to lift, lower and carry objects up to 50 lbs., work from heights, climb ladders, and work in confined spaces.
• Must have a valid driver’s license and good driving record.
• Spanish language fluency is a plus.
• Candidates must live in or being willing to move to Dallas.

We offer:

• Competitive compensation.
• The ability to become a part of an industry-leading dynamic team with a high focus on delivering results and continuous improvement.
• 401(k) plan through Fidelity, with a generous company match; 100% vested immediately upon contributing and no waiting period to start participating.
• Paid Holidays and Paid Time Off with the option to cash out unused PTO every year.
• Possibility for telework days, depending on position, with flexible make-up time for exempt employees.
• Blue Cross Blue Shield medical insurance plans, along with dental and vision benefits.
• Opportunities for career development and advancement; enhance your technical, specialized knowledge and gain new skills through promotions from within.

• Manage and oversee all aspects of litigation, including taking and defending depositions, drafting pleadings and discovery, and managing discovery processes.
• Consult with commercial clients on a wide range of legal issues, providing expert advice and guidance.
• Represent clients in court, presenting arguments and evidence in a compelling and effective manner.
• Conduct thorough and detailed legal research to ensure the best possible advice and representation for our clients.
• Collaborate with other attorneys in the firm to develop strategies for complex litigation cases.
• Maintain up-to-date knowledge of changes in commercial law and litigation practices, and communicate these changes effectively to clients and colleagues.
• Build and maintain strong relationships with clients, and work to develop new client relationships.

• Juris Doctorate degree from an accredited law school.
• A minimum of 5 years of experience in commercial litigation, with a proven track record of success.
• Membership in good standing with the state bar.
• Strong analytical and problem-solving skills, with the ability to handle complex legal issues.
• Exceptional communication skills, with the ability to explain complex legal concepts in a clear and concise manner.
• Excellent negotiation skills, with a proven ability to achieve favorable outcomes for clients.
• Strong organizational skills, with the ability to manage multiple cases and deadlines simultaneously.
• A commitment to providing exceptional service to clients, with a focus on achieving the best possible outcomes.
• High level of professionalism and ethical standards.
• Demonstrated ability to work effectively both independently and as part of a team.
• Proficiency in legal research tools and software.

• 
  
• Leading project teams to acquire, integrate and implement technologies into manufacturing and production processes.
  
• Ensure appropriate procedures and support documentation are maintained properly and efficiently. Includes: Manufacturing processes, NC programming, tooling, and tool design documentation.
  
• Manages capital equipment requisitions, ensuring competitive cost, process fulfillment, and quality needs are satisfied.
  
• Supports new product development to ensure manufacturability, cost, and quality from design concept to production release.
  
• Manages shop floor tooling and facility operating expenses.
  
• Assist and support plant and facility maintenance and improvements.
  
• Serve as a player-coach by executing hands-on manufacturing engineering tasks in addition to supervisory responsibilities.
  
• Manage the design/build of tooling and fixtures to support production and launch new parts in production.
  

• 
  
• Bachelor's degree (or equivalent) in Manufacturing Engineering, Mechanical Engineering, or Industrial Engineering preferred.
  
• 10 years' experience in an Engineering/Operations environment with 3-5 years in a Managerial position.
  

• 
  
• Strong organizational and interpersonal skills are a necessity.
  
• Ability to provide and give work direction within the department and communicate with all aspects/areas of the company.
  
• Attention to detail, with a high degree of accuracy.
  
• General Office computer skills. Ability to understand and navigate in Excel - ability to analyze large amounts of data and combine data from multiple sources.
  
• Requires effective communication skills in working with all departments.
  

• 
  
• Physical demands are typical of an office position including extended periods of sitting, extensive use of a personal computer and telephone.
  
• Position requires movement around the facilities.
  
• Occasional handling of material and components.
  

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

The Engineering Leader is responsible for leading the Design Engineering organization across the company and ensuring consistent, high-quality, and profitable project delivery. Reporting to the Vice President of Engineering Operations, this role oversees Engineering Managers and Design Engineering teams, driving accountability, operational efficiency, and technical excellence throughout the project lifecycle.

A core focus of this position is ensuring Design and Project Engineers are positioned to perform their highest-value work-developing client relationships, shaping execution strategies, and ensuring system accuracy and expected functionality. This role partners closely with Engineering Documentation leadership to ensure documentation and support workflows are effectively leveraged, allowing Design Engineering resources to remain focused on technical leadership and client-facing responsibilities.

Responsibilities include, but are not limited to:

• 
  
  
• Own the performance, development, and accountability of Engineering Managers leading Design Engineering teams, setting clear expectations and holding leaders responsible for team results, delivery quality, and professional growth.
  
  
• Establish and sustain a culture of ownership and accountability across the engineering organization by defining measurable standards for project delivery, documentation quality, and client satisfaction, and addressing performance gaps directly.
  
  
• Drive engineering efficiency and profitability by identifying misaligned workflows, reducing non-value-added engineering effort, and ensuring appropriate use of engineering support and documentation resources.
  
  
• Partner with Support Engineering leadership to ensure effective utilization of engineering support teams, removing barriers that prevent smooth handoff and enabling Engineers to focus on high-value technical work.
  
  
• Ensure Engineers are consistently focused on client relationship development, execution planning, technical accuracy, and system functionality throughout the project lifecycle.
  
  
• Maintain visibility into presales pipeline and active project lifecycle status, comparing as-sold versus as-delivered labor, identifying value-engineering opportunities, and supporting financial performance improvement.
  
  
• Collaborate with Field and Fabrication Services and Project Management leadership to align engineering capacity with project demand, participating in resource planning and ensuring engineering support meets business needs.
  
  
• Establish, enforce, and audit engineering standards and delivery processes that support consistent, high-quality outcomes, reducing variability and improving first-time quality across projects.
  
  
• Serve as the senior escalation point for engineering-related issues impacting project delivery or client satisfaction, intervening when projects are off track and guiding recovery plans with responsible managers.
  
  
• Provide leadership input on hiring, succession planning, and organizational design for Engineering Manager roles, ensuring alignment with technical requirements and cultural expectations.
  
  
• Track, analyze, and act on key engineering performance metrics, including utilization, margin contribution, rework rates, schedule adherence, and client satisfaction, using data to drive continuous improvement.
  
  

Required Skills and Experience

• 
  
  
• Bachelor Degree Required, preferably in Engineering, Construction Management or related field.
  
  
• 10+ years of experience in systems integration, audiovisual engineering, or a related technical field with progressive leadership responsibility.
  
  
• 3+ years of experience managing managers or leading large, multi-project technical teams.
  
  
• AVIXA CTS, CTS-I, or CTS-D certification.
  Demonstrated success improving team performance and delivering measurable business results.
  
  
• Experience developing, implementing, and enforcing engineering standards and processes at scale.
  
  
• Strong understanding of the full project lifecycle from design through commissioning.
  
  
• Experience partnering cross-functionally with Sales, Project Management, and Field & Fabrication Services.
  
  
• Ability to read and interpret architectural drawings, system schematics, and technical specifications.
  
  
• Financial acumen, including labor forecasting, project budgets, and margin impact analysis.
  
  
• Strong problem-solving skills with a bias toward action and resolution.
  
  
• Effective written and verbal communication skills suitable for executive-level engagement.
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Job description:

Telescent Inc. is a rapidly expanding high-technology company specializing in innovative network management systems. Based in Irvine California, our cutting-edge solutions leverage artificial intelligence and robotic systems to optimize data center operations worldwide, helping clients reduce costs and enhance efficiency through our patented technologies.

Position

We are seeking a dynamic Manufacturing Engineer to join our team and drive excellence in our manufacturing processes. In this role, you will be instrumental in designing, developing, and improving manufacturing systems for our advanced products. Your expertise will ensure seamless production workflows, enhance quality standards, and support continuous improvement initiatives across our manufacturing facility.

Responsibilities

• Develop and implement manufacturing processes for complex electronic and mechanical components, including plastics injection molding, CNC machining, and assembly line operations
• Utilize CAD software such as AutoCAD, SolidWorks, and Creo to design tooling, fixtures, and process layouts
• Program and troubleshoot programmable logic controllers (PLCs), robotics, CNC machines, and vision inspection systems to optimize automation
• Conduct root cause analysis on production issues to identify defects or inefficiencies and implement corrective actions
• Collaborate with process engineering teams to refine manufacturing workflows aligned with ISO 9001 standards and lean manufacturing principles
• Create detailed schematics, technical drawings, and process documentation for manufacturing equipment and industrial systems
• Support factory experience initiatives by applying mechanical knowledge to improve fabrication, tooling, welding, and assembly processes

Skills

• Strong project scheduling skills to manage multiple process improvement initiatives simultaneously
• Expertise in industrial engineering concepts including process engineering and factory layout design
• Proficiency in CAD tools such as AutoCAD, SolidWorks, Creo, and CAM programming for manufacturing applications
• Hands-on experience with robotics programming, vision inspection systems, CNC programming, and industrial equipment maintenance
• Knowledge of plastics injection molding techniques and tooling design for high-precision components
• Ability to perform root cause analysis using structured problem-solving methods
• Familiarity with schematics, GD&T (Geometric Dimensioning & Tolerancing), and industrial schematics for equipment troubleshooting
• Mechanical knowledge related to fabrication, welding, tooling development, and assembly line optimization
• Experience working within a manufacturing facility environment with a focus on continuous improvement practices
• Join us to be part of a forward-thinking team that values innovation, precision engineering, and operational excellence. Your contributions will directly impact the efficiency of our manufacturing processes while supporting the development of groundbreaking technologies used globally.

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Work Location: In person

Job Summary

We are seeking a skilled and dedicated Line Technician to join our dynamic manufacturing team. The ideal candidate will possess a strong mechanical knowledge and experience in a manufacturing facility or warehouse environment. As a Line Technician, you will play a crucial role in ensuring the efficient operation of our assembly line, utilizing various hand tools and power tools to fabricate and assemble products to meet quality standards.

Responsibilities

• Operate and maintain assembly line machinery and equipment to ensure smooth production flow.
• Utilize hand tools and power tools for the fabrication and assembly of components.
• Conduct regular inspections of equipment to identify any mechanical issues or maintenance needs.
• Collaborate with team members to troubleshoot production problems and implement effective solutions.
• Follow safety protocols and maintain a clean and organized work environment.
• Document production processes and report any discrepancies or quality concerns to management.
• Assist in training new employees on assembly line procedures and safety practices.
• Technicians are critical to ensuring the seamless operation of industrial facilities, providing essential services with minimal disruption to client operations. As a Hot Tap Technician, you'll perform specialized on-site services such as hot taps, line stops, and advanced techniques like Hi-Stops and Super Hi-Stops, all while maintaining the highest safety standards. If you're skilled, safety-conscious, and ready to take on challenging and rewarding work,
• Must be willing to travel 50% of the time.
• Must be able to travel the US

Experience

• Previous experience working in a manufacturing facility or warehouse setting is preferred.
• Proficiency in operating forklifts is a plus.
• Familiarity with assembly line processes and techniques.
• Strong mechanical knowledge with the ability to troubleshoot equipment issues effectively.
• Experience using various hand tools and power tools safely and efficiently.
• Ability to work collaboratively within a team environment while maintaining individual accountability for tasks.

If you are passionate about manufacturing, possess the required skills, and are eager to contribute to our team's success, we encourage you to apply for the Line Technician position today!

Job Type: Full-time

Pay: From $30.00 per hour

Expected hours: 40 to 60 per week

Benefits:

• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Schedule:

• 10 hour shift
• 8 hour shift

BE SURE TO APPLY ON OUR WEBSITE:

Job Title: I&C Design Engineer

Employment Type: Direct Hire

Location: Dallas, TX – (onsite 4 days/week, off every other Friday)

Salary: $110-130k

Benefits:

• Medical, Dental, Vision
• Life Insurance
• 401k
• PTO
• Holiday

Summary:

Akkodis is seeking an I&C Design Engineer for a DIRECT HIRE position in the Dallas, TX area. The desired candidate will have 5+ years of previous experience design for electrical instrument and controls. The I&C Engineer will be responsible for the design/development of industrial control systems including SCADA, PLC, and HMI systems. This is an excellent opportunity to support an exciting company in the electrical engineering industry.

***Remote 1 day/week, and off every other Friday***

Responsibilities:

• Site assessment and determination of needed instrumentation/SCADA upgrades
• Review of existing project documents – P&ID, system architecture, electrical drawings
• Coordination with clients on specific needs
• Document findings – Write assessment or report of existing conditions and recommendations
• Design/development of project drawings, including P&ID, system architecture, loop diagrams, installation details
• Create project specifications, including instrumentation, networking, control narrative strategies, software and hardware requirements for SCADA, PLC, and HMI systems
• Quality Control/Quality Assurance of project documents
• Attend/Conduct project meetings with client
• Review and comment on project submittals
• Coordination with Electrical Engineering Department

Required Skills:

• Bachelors Degree in an Engineering related field is required.
• A minimum of 5 years of relevant I&C experience is required.
• MUST HAVE PE or EIT and sitting for PE soon.
• Must have experience designing SCADA, PLC, and HMI systems.
• Strong background in AutoCAD is preferred.
• Registered Professional Engineer (PE) or Engineer-in-Training (EIT) in Texas is required.
• Experienced in the design of construction documents.
• Write Technical Memoranda based on site assessment.
• Drawing/PDF markups.
• Design relay schematics (motor control).
• PLC and SCADA HMI development and creation of PLC I/O lists
• Wide Area Network (WAN) design, including radio and cellular communications
• Fiber optic cable specification
• Control panel design
• VFD design/interface
• Physical and cybersecurity assessment and design preferred.
• A proactive, solution-oriented approach to challenges, with a focus on team success.
• Strong ability to foster and maintain professional, cross-functional relationships.

If you are interested in this I&C Engineer job, then please click apply through Akkodis.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records.

BEPC Inc. provides Specialized Engineering Solutions and IT Project Management services to Fortune 500 companies in the Life Science and Technology industries. BEPC Mexico, a division of BEPC Incorporated, provides and manages consulting services for Automotive and Medical device companies throughout Mexico and around the globe.

The Senior Automation & Controls Engineer is responsible for leading the design, development, implementation, validation, and continuous improvement of automated equipment and control systems. This role combines strong technical expertise in PLC-based automation, electrical and pneumatic systems, equipment validation, and project leadership within regulated manufacturing environments, preferably in the medical device industry.

KEY RESPONSABILITIES:

• Lead and manage electrical and control system projects, ensuring alignment with scope, budget, and schedule.
• Design, develop, program, and troubleshoot PLC-based control systems (Allen-Bradley, Siemens, Keyence, Beckhoff, Schneider).
• Develop and implement HMI/SCADA applications (FactoryTalk View, Aveva Edge, Ignition, TIA Portal, etc.).
• Integrate VFDs, servo systems, motion control, robots (e.g., Mitsubishi), and machine vision systems (Cognex, Keyence, DataMan).
• Participate in the design and implementation of new automated equipment and capacity expansion projects.
• Execute and oversee Factory Acceptance Tests (FAT), User Acceptance Tests (UAT/BUAT), and internal testing activities.
• Lead and support equipment validation activities (IQ, OQ, PQ) in compliance with FDA and ISO 13485 standards.
• Ensure proper integration with Manufacturing Execution Systems (MES) and Warehouse Control Systems (WCS), when applicable.
• Generate and maintain technical documentation, including BOMs, electrical schematics, panel layouts, validation protocols, and reports.
• Perform advanced troubleshooting of electrical, pneumatic, mechanical, and control systems.
• Oversee preventive and corrective maintenance strategies to improve equipment reliability and efficiency.
• Collaborate cross-functionally with Manufacturing, Quality, R&D, Maintenance, and external stakeholders.
• Provide technical leadership, delegate tasks effectively, and mentor junior engineers and technicians.
• Support continuous improvement initiatives focused on efficiency, safety, and process optimization.
• Ensure compliance with safety and regulatory requirements in regulated manufacturing environments.

QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, Mechatronics, Automation, Mechanical Engineering, or related field.
• 7+ years of experience in industrial automation and controls engineering.
• Strong expertise in PLC programming (Allen-Bradley, Siemens; others desirable).
• Advanced knowledge of electrical controls, schematics, and pneumatic systems.
• Experience with servo systems, VFDs, motion control, and robotics integration.
• Experience in executing FAT, UAT, and equipment validation (IQ/OQ/PQ).
• Proficiency in AutoCAD / AutoCAD Electrical.
• Strong troubleshooting skills in automation and manufacturing systems.
• Ability to manage multiple concurrent projects.
• Upper-intermediate to advanced English proficiency (written and spoken).
• Availability to work on a 2–3 month fixed-term contract.
• Authorized to work in the location where the position is posted. Be a U.S. Citizen, Permanent Resident, or hold a valid TN Visa.

PREFERRED QUALIFICATIONS:

• Strong project planning, budgeting, and stakeholder communication skills.
• Experience in warehouse automation, material handling, or the post/parcel sector.
• Knowledge of networking protocols (Ethernet/IP, Profinet, Serial).
• 3+ years of experience in regulated environments (medical device preferred).
• Experience with MES/WCS integration.
• Familiarity with FDA regulations and ISO 13485.