Engineering Jobs in Sunrise Florida

The Building Engineer reports to the Lead Engineer and maintains a working relationship with and takes direction from all Property Managers in his/her area for issues affecting their properties. Issues may range from tenant improvement work to preventive maintenance and repair of all building systems. This must be done in a manner that not only protects, but also maximizes the value of the property. The Building Engineer must exhibit outstanding client service and professionalism in all interactions with tenants and RMR staff. Teamwork and collaboration are critical to this position's success. The portfolio currently consists of a large single tenant office building and a small mixed-use office building.

• Operate, maintain, and log all HVAC and MEP equipment under the direction of their supervisor.
• Complete tenant service requests, and develop and maintain positive tenant relations through prompt, courteous response to tenant requests.
• Perform preventive maintenance and repairs on HVAC equipment, plumbing and electrical systems, as directed by their supervisor. Duties include, but are not limited to changing filters, coil cleaning, greasing motors, replacing light bulbs & ballasts, inspecting/adjusting belts, and regular inspections of equipment
• Maintain computerized or manual equipment logs that detail preventive work performed.
• Clean and paint equipment and surrounding areas relating to equipment and equipment rooms.
• Assist in ordering stock and inventory of parts and supplies, as needed.
• Respond immediately to emergency situations and customer concerns.
• Review elevator maintenance records and confirm elevator maintenance is performed per national agreement. Inspect condition of elevator machine rooms. Report any elevator deficiencies to their supervisor.
• Assist with review of tenant improvement plans. Inspect active construction areas and confirm contractors are following all building rules and regulations.Coordinate fire alarm and sprinkler shutdown and drain downs with contractors as needed.
• Coordinate all quarterly fire alarm testing and maintenance with building vendor.
• Maintain and operate life safety/fire systems
• Perform carpentry and snow removal, if necessary.
• Take meter readings on all meters and equipment as directed by their supervisor.
• Perform minor repairs on doors, hardware, lock, windows, ceilings, and floors
• Troubleshoot, evaluate and make recommendations to upgrade maintenance operations and/or implement savings opportunities.
• Possess competent knowledge of the use and care of tools and equipment used in facility and ground maintenance.
• Inspect buildings, grounds and equipment for unsafe or malfunctioning conditions and report to management
• Inspect new installation for compliance with building codes and safety regulations
• Comply with all applicable codes, regulations, governmental agency and company directives, as related to building operations and practice safe work habits
• Daily communication with property management, engineering staff, security, tenants and contractors/vendors is vital.

General Maintenance and Operation Duties:

• Understand OSHA guidelines and how to ensure that all equipment is maintained to guidelines/standards.
• Read and follow written and oral instructions.
• Convey thoughts and recommendations orally and/or in writing to supervisors, contractors and others in order to resolve building-related problems.
• Operate and use necessary manual and power-driven tools.

• High school diploma or GED equivalent required.
• Minimum 3-5 years of building maintenance experience or commensurate experience in a trade (plumbing, electrical, HVAC).
• HVAC or electrical technical school training preferred.
• Applicable military experience or other related operations experience will be considered including power plants, multi-family, hotels, hospitals, facilities, etc.
• Experience with automated building management systems
• Ability to interpret mechanical, electrical blueprints and schematics
• Ability to work in a fast-paced environment, with the ability to multi-task and meet deadlines.
• Must be team oriented and a problem solver.
• Strong verbal and written communication skills.
• Manage own time on a daily basis with little supervision
• Must be able to handle multiple projects, changing priorities, and continually heavy workloads
• May be required to work extended periods of time without relief, when responding to priority/emergency situations (including overtime-type assignments)
• Stooping, standing, climbing and frequent lifting of a minimum of 50 lbs. of equipment (pump, tools, ladders) and ability to safely install rigging/lifting device
• Lift and carry objects of up to 50 lbs. for distances of up to 30 feet
• Climb ladders and stairs.
• Maintain professional appearance and manner at all times while in the complex.
• Will be required to perform off site duties through the use of a personal vehicle.
• Must have a valid driver's license.
• If, at any time, security clearance is required for your job (e.g. you are assigned to work at a property leased by the Federal government), being awarded such clearance will be a condition of your employment.

The RMR Group offers an extensive total rewards package to ensure that your benefits align with your needs. Employees who work at least 21 hours per week are eligible to participate in The RMR Group's benefits plans, including:

• Health Insurance
• Dental Insurance
• Vision Insurance
• Life & Disability Insurance
• Health Savings Account (HSA) & Flexible Spending Plans (FSA)
• 401(k) Plan with Employer Match
• Holidays, Vacation & Sick Time
• Parental Leave
• Tuition Assistance
• Matching Gift Program
• Wide Array of Voluntary, Employee-Paid Benefits to choose from including Critical Illness & Accident Insurance, Identity Theft Protection & Pet Insurance

The RMR Group (Nasdaq: RMR) is a leading U.S. alternative asset management company, unique for its focus on commercial real estate (CRE) and related businesses. RMR's vertical integration is strengthened by nearly 900 real estate professionals in more than 30 offices nationwide who manage approximately $40 billion in assets under management and leverage more than 35 years of institutional experience in buying, selling, financing and operating CRE. RMR benefits from a scalable platform, a deep and experienced management team and a diversity of real estate strategies across its clients. RMR has been recognized by The Boston Globe as a "Top Place to Work", by the Environmental Protection Agency (EPA) as an "ENERGY STAR Partner of the Year" and ranked by the Building Owners and Managers Association (BOMA) as having one of the highest number of BOMA 360 designated properties in its portfolio. RMR is headquartered in Newton, MA and was founded in 1986.

RMR's mission is to create long term value for our clients by managing their investments and assets "like we own it" - an approach that consistently and repeatedly generates opportunities for all our employees, investors and stakeholders. We are guided by six core values:

• Integrity at Our Core.
• Perform Passionately and Effectively.
• Inspired Thinking.
• Like We Own It.
• Power of We.
• Mutual Respect.

Visit our website to learn more about what makes The RMR Group a rewarding place to build a career.

Follow RMR on LinkedIn and Instagram @thermrgroup.

The RMR Group is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here.

The Broward County Board of County Commissioners is seeking qualified candidates for Engineering Unit Supervisor (Highway Construction and Engineering Division).

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.



This position supports professionals responsible for managing capital and mobility advancement projects for Broward County's Highway Construction and Engineering Division. The ideal candidate will have experience coordinating with multiple entities, including municipalities, state agencies, and local authorities. Work involves the review, planning, and coordination of the design and construction of County capital and mobility advancement projects, including schedules, budgets, and staff assignments.

General Description
Performs advanced professional and supervisory engineering work in the design and review of a wide variety of engineering and environmental projects.
Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.
Minimum Education and Experience RequirementsRequires a Bachelor's degree from an accredited college or university with major coursework in civil engineering.

Requires six (6) years progressively responsible experience in professional engineering work related to roadway design and construction or closely related field, including two (2) years of supervisory experience.
Special Certifications and LicensesPossess and maintain Professional Engineer License in State of Florida for duration of assignment.

Preferences* Master's Degree in Civil Engineering, Public Administration or closely related field* Certified in the use of one (1) or more of the following engineering programs (i.e. ICPR, ASAD, HY-8, HEC-RAS, HEC-HMS, Synchro, HCS, IMSA), or similar
* Construction Training Qualification Program (CTQP) Certifications (Asphalt, Concrete, Earthwork, QC Manager, etc.)
* Professional Traffic Operations Engineer, Professional Surveyor & Mapper, General Contractor License, or similar
* Project Management Professional and/or Certified Public Manager
* Advanced Work Zone Traffic Control Training Certification
* At least ten (10) years of experience in design and construction of roadway/traffic projects
* At least five (5) years of experience in one (1) of the following specialized fields of engineering: Traffic Operations, Structures, Drainage, Geotechnical, Construction Management
* At least three (3) years of experience with MicroStation OpenRoads Designer (ORD)
* At least two (2) years of experience in governmental contract and procurement
* At least two (2) years of experience in the preparation of agenda items and/or resolutions

SCOPE OF WORK

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Schedules, assigns, and supervises engineering design projects; directs and coordinates field surveys, plan design, preparation and review, cost estimate development, and specifications preparation; participates in the development and design and review of major and complex projects.

Supervises and participates in the analysis and review of engineering studies and designs prepared by professional consultants; prepares recommendations for the consideration of professional and administrative superiors and committees.

Supervises the preparation of right-of-way and construction plans for major thoroughfares; conducts studies and prepares reports on proposed locations for future major thoroughfares; maintains liaison with appropriate outside agencies concerning projects under consideration for construction.

Supervises and participates in the activities of construction engineers, inspectors, and materials technicians in the investigation and construction of water and sewer mains, roadways, structures, and related public work projects; prepares general and special specifications for contract construction; supervises the maintenance and analysis of payment estimates and records.

Oversees and performs the technical review of remedial action plans; oversees and administers environmental licensing programs.

Conducts special engineering studies and projects relating to technical and administrative aspects of the public works function; coordinates the utilization of computer technology as related to the engineering function.

Conducts long-range studies involving other departments, agencies, and organizations; prepares reports and recommendations; seals and signs engineering plans, drawings, and documents.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs sedentary work that involves walking or standing some of the time and involves exerting up to 10 pounds of force on a regular and recurring basis or sustained keyboard operations.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

Competencies

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Directs Work

• Plans and Aligns

• Optimizes Work Processes

• Ensures Accountability

• Builds Effective Teams

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

We are seeking a skilled Chemical Engineer to design, analyze, and optimize pharmaceutical manufacturing processes. The role involves leading process improvement and development projects, resolving complex technical and operational challenges, and ensuring compliance with Good Manufacturing Practices (GMP), quality standards, and regulatory requirements. The ideal candidate will have strong technical expertise, project management experience, and a continuous improvement mindset.

Shift / Working Hours

• Hours: 8:00 AM – 5:00 PM Mon- Fri

Key Responsibilities

• Analyze, design, and optimize pharmaceutical manufacturing processes (e.g., formulation, mixing, granulation, coating, sterilization)
• Lead process improvement and development projects from concept through implementation
• Apply structured problem-solving methodologies (Root Cause Analysis, 5 Whys, Fishbone, FMEA) to address deviations and operational issues
• Drive process improvement initiatives focused on yield, efficiency, robustness, and scalability
• Collaborate with Production, Quality, Validation, Engineering, Maintenance, and R&D teams
• Ensure all process changes comply with GMP, regulatory requirements, and quality standards
• Develop, review, and maintain process documentation, SOPs, batch records, and technical reports
• Support process validation, revalidation, and technology transfer activities
• Analyze process data and KPIs to drive continuous improvement and risk reduction
• Lead or support CAPA investigations related to process deviations, non-conformances, and OOS results
• Participate in internal and external audits (FDA, EMA, local authorities)
• Train manufacturing and technical personnel on process changes and best practices

Required & Preferred Qualifications

Education

• Bachelor's degree in Chemical Engineering
• 5–10 years of experience in chemical engineering, process improvement, or pharmaceutical manufacturing
• Proven experience in process development and project execution
• Strong technical problem-solving and root cause analysis skills
• Experience supporting validation and regulatory inspections preferred

Technical Knowledge

• Pharmaceutical manufacturing processes and unit operations
• GMP / cGMP, FDA, EMA regulations
• Process validation, scale-up, and technology transfer
• Risk management tools (FMEA, HACCP)
• Statistical analysis and process capability (Cp, Cpk)
• Process data analysis tools and advanced Excel

Apply now

Industrial Engineer

We are seeking a candidate with a background in Industrial Engineering and Operational Risk to drive process transformation within a regulated environment.

Bachelor's Degree in Industrial Engineering (REQUIRED)

Key Responsibilities

• Project Leadership: Manage end-to-end execution under strict timelines while ensuring full regulatory compliance.
• Process Innovation: Lead transformation initiatives to optimize control effectiveness and monitoring strategies, quantify risk mitigation and drive measurable business impact (ROI/Cost Savings).
• Data Analysis: Use quantitative analysis and structured problem-solving to identify risks and trends.
• AI Adoption: Integrate AI-enabled tools to enhance operational efficiency and decision-making.
• Stakeholder Management: Build leadership-ready presentations and clearly communicate insights across all organizational levels.

Required Qualifications

• Education: Bachelor's Degree in Industrial Engineering (REQUIRED).
• Experience: 2+ years in experience in Project Management, Process Engineering, or Operational Risk Preferred
• Environment: Nice to have proven ability to navigate regulated environments(Financial Services preferred).
• Analytical Power: Mastery of Excel (including complex modeling, macros, and trend forecasting). SQL or Tableau experience is a significant plus. Advanced proficiency in Excel for financial/risk modeling (not just PivotTables)
• Strategic Communication: Proven track record of influencing cross-functional teams and managing stakeholder expectations without direct authority.
• Financial Literacy: Ability to quantify the business impact (ROI, Cost-Benefit) of process changes and risk mitigation strategies.
• PowerPoint for storytelling with data. (Executive-level deck building).
• Soft Skills: Superior analytical, communication, and interpersonal skills.

Preferred Experience

• Risk Management: Operational risk identification, mitigation, and monitoring.
• Frameworks: Experience with process governance, risk assessments, or control frameworks.
• Technology: Hands-on experience adopting or working alongside AI solutions.

Why Join Us?

• Drive high-impact enterprise-level risk and innovation strategies.
• Work at the intersection of Industrial Engineering, Risk, and AI.
• High visibility with cross-functional leadership and global stakeholders.

#IndustrialEngineering #ProcessImprovement #ProjectManagement #OperationalRisk #Hiring

Molding Process Engineer

Job Description

About Company

At Ennovi we harness the power of two megatrends - electrification and AI - to help industries innovate at speed, operate smarter, and achieve sustainable growth. By combining these transformative forces with our global reach and best talent, we empower our customers to lead their markets and drive sustainable progress.

From automotive to aerospace, consumer electronics, data storage, industrial, and medical markets, we help our customers achieve these megatrends by creating smarter, safer, and more sustainable solutions.

We excel in developing high-performance, custom solutions that meet diverse technical needs, solve unique challenges, optimize performance, and adapt to evolving market demands.

Our mission is to get customers to the future faster, from anywhere. Headquartered in Singapore, ENNOVI has a global presence across North America, Europe, SEA and China, where all its activities are socially responsible, with minimal environmental impact. Learn more at Join Us

At Ennovi, we envision a future of electrification and innovation and strive to create an inspiring workplace where our employees are integral to shaping that future. We offer a dynamic, collaborative and inclusive culture that encourages continuous learning, professional growth, and a sense of purpose. As a part of the Ennovi team, employees experience the excitement of being at the forefront of cutting-edge technologies and contributing to a sustainable future.

Our commitment to the transformation is epitomized by our five pillars: Speed, Innovation, Best Talent, Global Reach, and Sustainability. This entails navigating exponential market changes through agile structures, fostering innovation across all aspects of our business, strategically expanding our global footprint, championing sustainability initiatives and nurturing a winning team.

Privacy Policy

Ennovi is an equal opportunity employer in conformance with all applicable laws and regulations to individuals who are qualified to perform job requirements. The Company administers its personnel policies, programs, and practices in a non-discriminatory manner in all aspects of the employment relationship, including recruitment, hiring, work assignment, promotion, transfer, termination, wage and salary administration, and selection for training.

By applying to this job posting, you agree with and acknowledge our privacy policy.

Job Summary

We are seeking a Molding Process Engineer to join our team in the Medical Business.

The Molding Process Engineer reports directly to the Engineering Manager and will be responsible for the support of all internal moulding activities that include product development, validation, qualification and implementation of processes, methods and equipment. Strong process development capabilities are essential.

Ennovi Medical is your end-to-end customized solutions partner, empowering OEMs to harness AI-driven technologies and accelerate innovation for medical devices.

Main Responsibilities

• Develop, validate, and optimize injection molding processes for new and existing medical products.
• Collaborate with tooling, quality, and production teams to ensure robust mold designs and process capability.
• Lead root cause analysis and corrective actions for molding-related defects and process deviations.
• Support mold qualifications, including IQ/OQ/PQ protocols and documentation.
• Monitor and analyse process data to drive continuous improvement and reduce scrap and downtime.
• Specify and implement process controls to enhance molding performance.
• Maintain compliance with GMP, ISO 13485, and FDA requirements.
• Train operators and technicians on molding best practices and troubleshooting techniques.
• Participate in cross-functional teams for new product introductions and engineering changes.

Qualifications & Skills

• Bachelor's degree in mechanical, Industrial, or Plastics Engineering or equivalent (5 years in relevant experience)
• Minimum of 3 years of experience within a Plastics/Polymer processing
• Experience with functioning in a highly regulated environment
• Strong understanding of Polymer technology and test methods
• Strong written and verbal communication skills
• Demonstrated experience in manufacturing medical devices using various manufacturing technologies
• Excellent process development capabilities
• Experience and proficient with Data Analysis, Root Cause Analysis and Statistical Method Application.
• Six Sigma Greenbelt and Lean Process Background
• Experience working with insert molding
• RJG Master Molder certification or equivalent.
• Experience with automation and robotics in molding operations.
• Familiarity with ERP and MES systems.

Akkodis is seeking a HVAC Development Engineer for a Direct Hire job with a client in Fort Lauderdale, FL.

Salary Range: $87K/Annum to $92K/Annum; The salary may be negotiable based on experience, education, geographic location, and other factors.

HVAC Development Engineer:

• Establish validation Test Plans for HVAC units, Specifications, Reliability testing and perform the tests in lab per the established plan
• Support build of all IPM and FARR simulation models for the new and legacy products by providing necessary inputs
• Raise Engineering Change Requests (ECRs) and track their progress
• Create component specifications to support resourcing and procurement
• UL & AHRI Regulatory knowledge and application to products testing and specification (AHRI, UL, ETL)

Desired Qualifications:

• Bachelor's degree in Engineering disciplines (Mechanical / Mechatronics preferred)
• Experience with technical risk assessment tools (e.g., FMEA, DRBFM)
• Strong organizational & interpersonal skills
• Excellent oral and written communication skills
• Test prototypes and write reports to document results
• Develop specifications, detailing and assembly drawings for products and equipment

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at (61 or ().

Equal Opportunity Employer/Veterans/Disabled

Benefits offerings include but are not limited to:

• 401(k) with match
• Medical insurance
• Dental Insurance
• Vision assistance
• Paid Time Off

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

Company Description:

A world leader in water treatment solutions, IDE specializes in the development, engineering, construction and operation of desalination, water reuse, and industrial water treatment plants.

Duties and Responsibilities (at a minimum):

• Provide process engineering leadership and technical support to Operations and Maintenance, including training, troubleshooting, and optimization of plant performance.
• Provide process set points and operating recommendations and coordinate implementation with the Plant Manager and Chief Operator to optimize plant operation.
• Prepare and provide appropriate reports for the Plant Manager
• Achieving and stabilizing the required quality parameters of the final product water supplied to the customer
• Continuous monitoring (online) on the process and the production performance of the plant, using the control room monitors, online reports and online alarms
• Monitoring the performance of the membranes by using periodic and continuous reports of short and long-term trends
• Daily, weekly and monthly reports to the various authorities
• Developing process monitoring tools, including daily, weekly and monthly process performance reports. Identify trends and problems, and defining the right solution
• Managing weekly meetings to identify process problems and defining solutions
• Availability 24 hours a day 7 days a week to provide immediate instructions to the control room
• Participate in the review, formulation and implementation of an Annual Operations Plan
• Participate in the review, formulation, implementation and achievement of an 'Annual Budget' and ensure its consistency with the 'Annual O&M budget plan'
• Participate in the provision of an accurate and representative progress report against the achievements of the 'Annual Operations Plan'
• Participate in the selection and recruitment procedure where appropriate
• Demonstrate commitment to the principles of 'Continuous Improvement'
• Participate in the identification and implementation of initiatives that will result in performance improvements
• Participate in the continuous development of systems, procedures and where appropriate 'Standard Operations', for all recurring activities
• Participate in the development and publication of statistical data and reports to the plant owners and the company
• Keep abreast of changes in the process and make recommendations as appropriate
• Ensure that all operations in your work are carried out in compliance with current Health and Safety Regulations.
• To ensure that all \"Waste Disposal\" procedures are carried out in accordance with current statutory requirements
• Generate work instructions and operating guidance for new or modified processes and distribute to the Plant Manager, Maintenance Manager, and Chief Operator.
• To undertake other such duties which may arise from time to time and are consistent with the nature of the position of your responsibility.

Reporting Line: Directly to the Plant Manager

Personal Attributes:

• Effective communication skills both written and spoken
• Good analytical and problem-solving skills
• Work successfully as a team member or independently
• Commitment to quality of work and company goals
• Enthusiastic to learn new systems and processes
• Willingness to lend your efforts wherever needed
• Effectively perform in stressful situations
• Complete work within assigned timeframe

Physical Demands:

• Ability to lift up to 50lbs and over 51lbs with assistance
• Ability to sit, stand, bend, crouch, kneel, climb, balance, push/pull, and walk for long periods of time
• Ability to enter and exit small, confined spaces
• Finger dexterity to work keyboard or operate tools, grasp tools and carry objects
• Ability to see in the normal range of vision with or without correction sufficient to read computer screens, documents, dials, gauges, meter-reading equipment, and operate motor vehicles and equipment
• Hear in the normal audio range with or without correction

Environmental Conditions:

Industrial environment working both indoors and outdoors continuously around:

• Loud noise
• Dust
• Heat
• Salt and fresh water
• Uneven, rough or slippery surfaces
• Hazardous chemicals in solid, liquid, and vapor form
• Toxic materials
• High and low voltage electricity
• Equipment under high pressure
• High speed rotating equipment
• Heavy equipment
• Heights above 5 Feet

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

JOB TITLE

Customs Engineer II

DEPARTMENT

MAIN PURPOSE OF JOB AND OBJECTIVES

• Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
• Performs custom product development activities, product evaluation, and testing, process development, test fixture development, verification/validation protocol and reports.

POSITION IN ORGANISATION

Position in organization can be found on the Organizational Chart via the company intranet.

KEY DUTIES

• Ensure adherence to Design Control procedures for standard and custom devices.
• Work with project leaders and supporting departments to complete project objectives.
• Develop, test, and refine prototypes and new product concepts.
• Finalize designs and create detailed engineering specifications ensuring proper tolerancing and design for manufacturability.
• Develop verification/validation protocols, carry out testing, and write reports.
• Evaluate competitor products.
• Develop new processes, test fixtures, and documentation methods.
• Work with Regulatory/ Quality group to carry out functionally specific testing.
• Work directly with Physicians/ Marketing to conceptualize new products, improve existing products and refine prototypes.
• Investigate field complaints and recommend actions/solutions.
• Manage product builds for formal testing programs.
• Assure Custom Design processes are in accordance with design control procedures.
• Develop project timeline for development projects and ensure project execution.
• Develop and implement new processes, test fixtures, and documentation methods.
• Take part in design reviews and technical product reviews.

COMPANY

REQUIREMENTS

• Must work within requirements of company handbook and policy statements.
• Note: Company Handbook, Policy Statement and Authorization of Limits do not form part of the quality system

QUALITY

REQUIREMENTS

• Maintain awareness of the relevance and importance of activities performed and how they contribute to the achievement of quality objectives.
• Work within the QMS always, ensure accurate completion of records and highlight issues to immediate supervisor any issues affecting quality.
• Responsible to ensure facility, processes and documentation remain in a state of audit readiness at all times.

EH&S REQUIREMENTS

• Take care of your own health and safety and that of others who may
• be affected by your actions.
• Work co-operatively to highlight issues affecting Environmental Health and Safety

QUALIFICATIONS & EXPERIENCE

• Excellent Written and Verbal Communication
• Ability to interact with all levels within the organization.
• Work well in a team environment
• Analytical skills for compiling and analyzing data.
• Computer and software skills
• Ability to motivate others and improve efficiency.
• Sit/Stand/Walk 8 hours per day.
• Light lifting
• Bachelor's degree in engineering/science and a minimum of three years' experience in the medical device industry or equivalent of
• 10+ years of experience in a technical role in the medical device industry
• Ability to organize and conduct experiments independently.
• Ability to analyze and solve technical problems.
• Good oral and written communication skills (English)
• Hands-on Experience building prototypes, developing in-vitro testing, capturing the output of in-vitro, and in-vivo testing, development of tooling and test fixtures.
• Understanding of quality system requirements (e.g. 21CFR820, ISO13485).
• Use of SolidWorks & AutoCAD as a design tool
• Knowledge of applied statistics
• Hands-on knowledge of plastics, metallurgy, and manufacturing processes
• Detailed knowledge of Design and Controls per ISO13485

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

A new paradigm of computing

Magic Leap is a pioneer in spatial computing, developing groundbreaking augmented reality technology that seamlessly blends digital content with the real world. As the creator of the next computing platform, our mixed reality devices unlock new possibilities for how people interact with and experience their surroundings.

Magic Leap could be your place if you want to be part of a united team where everyone is empowered and trusted to make an impact. At Magic Leap, you can explore innovative solutions and use your talents to solve real-world problems. Working alongside industry experts, you can grow your skills and amplify human potential at the intersection of the physical and digital worlds. We know that successful change and progress accelerate diverse perspectives. As we shape our future, everyone's voice matters. Together, we can reimagine the world of work and, with our bold partners, make the impossible possible.

The opportunity

As a Principal Hardware Architect within our Electrical Engineering team, you’ll have the opportunity to design and architect Magic Leap's next-gen cutting-edge headset(s). We are looking for an exceptional Architect with a customer-centric attitude toward designing complex technical solutions in the augmented reality space. Join our team to continue to revolutionize spatial computing and push the boundaries of Augmented Reality experiences.

*This role is ideally based at our Plantation, FL / Boulder, CO / Austin, TX offices, but we will consider remote arrangements for exceptional candidates who are a strong fit for the position*

What you’ll do

• Develop new solutions, standards, and operational plans for next-generation headset projects
• Provide guidance, coaching, and training to other employees across the Company within their area of expertise
• Manage large project initiatives of strategic importance to the organization, involving large cross-functional teams
• Drive complex hardware and systems decisions through all phases of research & development, engineering design cycles, and validation through productization
• Work cross-functionally with internal partners to define product requirements and expectations
• Communicate complex systems and trade-offs to enable product decisions
• Collect inputs from internal and external partners to design a system that drives toward business goals and objectives
• Generate detailed architectural documentation and diagrams to allow partners to drive towards common goals

The experience you bring

• 10+ years of professional experience in hardware product development
• Bachelor's degree in Electrical Engineering, or equivalent relevant experience in an applicable field
• Experience launching high-volume products into market
• Experience designing hardware, firmware, and software interfacing across multiple modules in a system
• Knowledge of high-volume silicon (SoCs, GPUs, ASICs), compute, storage, and low-power systems management
• Experience working with displays, optical systems, computer vision, and camera systems
• Technical communication skills (verbal and written). Experience interfacing with cross-functional teams and driving data-driven decisions
• Experience working with I2C/SPI/UART interfaces
• Experience working with high-speed interfaces (e.g. USB-C, PCIe, DisplayPort, MIPI, DDR, etc.) is highly preferable

It’s exciting if you also have

• Extensive Software architecture experience. Coding skills in C, C++, Python, etc
• Understanding of computer architectures like GPU, CPU, Neural Networks & compute engines like RISC-V
• Distributed compute architecture experience
• Display System architecture and module design experience
• Camera System architecture and module design experience
• Experience using EE Simulation tools: e.g. PSPICE, SI/PI tools, Matlab

Additional Information

All your information will be kept confidential according to Equal Employment Opportunities guidelines

Accommodations

If you need an accommodation during the application, interviewing, or hiring process, you may request an accommodation by emailing Magic Leap will reasonably accommodate qualified individuals with disabilities to the extent required by applicable law.

Please note that we do not accept any application documents via (e-)mail. Furthermore, we do not accept applications from recruitment agencies for this role.

#LI-CP1

#LI-Onsite

Site Reliability Engineer  Ft Lauderdale, FLSite Reliability Engineer  Ft Lauderdale, FL

 If you post this job on a job board, please do not use company name or salary.

Experience level: Mid Level (5-8 yrs exp.)

Experience required: 6 Years

Education level: Bachelor’s degree

Job function: Information Technology

Industry: Information Technology and Services

Pay rate : $63 per hour 

Total position: 1

Relocation assistance: No

Visa sponsorship eligibility: No

• Act as the primary point of contact for issue management, acknowledging and addressing emergency situations and high-severity incidents with speed and professionalism.
• Collaborate closely with technology teams, product owners, and other relevant stakeholders to investigate, analyze, and resolve issues effectively.
• Drive the resolution process end-to-end by handshaking with respective technology partners, ensuring accountability and clear progress towards closure.
• Provide periodic and structured updates on the status of issues to leadership and all relevant stakeholders, ensuring transparency and alignment.
• Coordinate across multiple teams and functions to facilitate solutions, remove roadblocks, and ensure timely incident resolution.
• Contribute to continuous improvement by identifying root causes and working with teams to prevent recurrence of critical issues.
• Need candidates who have at least 4+ years of experience in Java and open-source technologies.
• Problem-solving skills with a mindset for designing reliable, long-living solutions.
• Exceptional communication and stakeholder management skills, with the ability to collaborate with cross-functional teams, including developers, business analysts, and quality assurance professionals.
• Handling and troubleshooting day-to-day operations.
• Identifying problems or known errors and performing root cause analysis (RCA).
• Knowledge in Agile methodology.
• Must be local to Fort Lauderdale, FL geography.

   If you post this job on a job board, please do not use company name or salary.

  
  
  

  Job Description