Engineering Jobs in Sunnyvale Ca Remote
125 positions found — Page 3
We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Systems Safety Engineer at Reliable Robotics, you will be a part of the Systems & Safety team and will report to the Systems & Safety Manager. The Systems & Safety Team is responsible for architecting systems which support novel safety-critical functions, establishing development methodologies for new technologies, and comply with the federal regulations.
As part of an experienced multi-disciplinary team, you will contribute to expanding the aircraft's operational and functional capabilities. Your professional experience in aircraft and system safety will further strengthen the team's ability to meet rigorous expectations of stakeholders and certification authorities. You will collaborate with members from other groups within Reliable Robotics to ensure the safety of new and novel systems necessary for unmanned aircraft operations.
Responsibilities
In your role as a Systems Safety Engineer you will contribute to the development and architectural design supporting the delivery of prototypes and certifiable safety-critical flight systems in a dynamic start-up work environment.
You will have these responsibilities:
Apply systems safety methodologies as defined by industry standards
Develop new processes / methodologies used to certify autonomous / remote operations
Perform safety activities in coordination with design, development and verification of aviation systems including: Generate safety artifacts such as FHAs & Safety Assessments for aircraft, systems and equipment. Generate reliability or testability assessments to support safety activities. Validate safety requirements in collaboration with systems teams. Ensure consistency between the safety activities and development activities.
Support flight operations with safety of flight assessments for experimental operations
You'll also have the opportunity to interact with other domains within Reliable Robotics and become involved in a broad task spectrum not limited to typical system safety engineering activities.
Basic Success Criteria
Bachelor's Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or related discipline
Broad experience from 10+ years of safety engineering on various systems, including complex safety-critical aerospace systems
Demonstrated self starter with the ability to solve problems from first principles
Ability to work well independently and cross-functionally across multiple organizations
Preferred Criteria
Advanced Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or related discipline
Creative problem solver that can bring multiple disciplines together with the ability to assess risk and make design and development decisions without all available data
Experience certifying flight critical systems, hardware, and software via ARP4754A, ARP4761
Demonstrated ability ability to obtain regulatory acceptance of safety documents
This role is critical to us at Reliable Robotics, because it works to channel the ingenuity of the development engineers, hardware and software, towards a successful, concise and conclusive, certification package for an aircraft that flies itself.
This role can be remote, or located at our facility in Mountain View, California.
Must be willing to travel up to 10% of the time.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $190K - $300K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As an FPGA Design Engineer at Reliable Robotics you will be a part of the Embedded Systems team which owns the firmware and software at the heart of the Reliable Robotics autonomy stack. We are a creative and diligent team that provides dependable computing, networking, signal processing, and motor control solutions to bring our aircraft to life. Your contributions will directly enable development of our flight computer and air to air RADAR, unlocking higher-level capabilities, and setting the stage for product certification & delivery to market.
Responsibilities
In your role as an FPGA Design Engineer, you will work in a highly collaborative and cross-functional development environment including mutual peer review to maintain high product quality. This work will include FPGA requirements, design, and simulation as well as code synthesis, hardware integration, and test support. You will contribute to multiple FPGA projects in support of the long-term Reliable Robotics technology roadmap.
Basic Success Criteria
Bachelor's degree in Electrical Engineering, Computer Engineering, or equivalent
4+ years of full-cycle electronics hardware development experience in a professional environment
Professional experience designing FPGA digital logic using industry-standard design, simulation, and synthesis tools
Preferred Criteria
Advanced degree in Electrical Engineering, Computer Engineering, or equivalent
Proven track record of product ownership including development and field support
Experience with safety-critical FPGA development (DO-254 level A/B or equivalent industry standard)
Experience architecting, implementing, and verifying fixed point DSP algorithms
Comfortable with a fast-paced, agile/iterative development life cycle
Pragmatic, results-oriented work style
FPGA designers at Reliable Robotics have a unique opportunity to work within a vertically integrated technology stack that extends up to the aircraft level, with a direct impact on the aircraft's capabilities and requirements. They execute a focused mission to establish the foundation of Reliable's technology roadmap. We are a fast-paced team that gets results. With your experience, motivation, skills, and enthusiasm, you'll help the team accomplish amazing things.
Employees working from our headquarters in Mountain View, CA may expect very little travel.
At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $185K - $245K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Harness Engineer at Reliable Robotics, you will be a part of the system integration team and will report to the System Integration Engineering Manager. The system integration team is a small group of highly motivated engineers designing, integrating, testing, and flying advanced mechanical and electrical systems. The harness engineer is a very cross-functional role at the convergence of the avionics, mechanical, integration, and production teams, with significant hands-on work designing, building, integrating, and testing our harnesses, enclosures, and mounting hardware; expect to broaden your design and application experience.
Responsibilities
In your role as a Harness Engineer you will work with the avionics, mechanical, and integration teams to define the harnessing design, including routing, component selection, and manufacturing and integration processes. You'll be responsible for the detailed design of both flight and test harnesses, and you'll be working with the production technicians and A&Ps to get the harnesses built and installed on the aircraft. You'll have the opportunity to design, install, and test your hardware on a remotely operated aircraft, and you'll be an instrumental part of how our hardware teams come together on the airplane.
Basic Success Criteria
BS in Mechanical Engineering, Electrical Engineering, or equivalent industry experience
2+ years experience in electrical harness design
Ability to route harnessing (both in CAD and physically in the airplane) in a strategic manner
Experience working with connectors, backshells, EMI shielding, and cable/wire protection methods
Preferred Criteria
Experience defining routing and bulkhead requirements
Experience performing design trades for and detail design of aerospace flight harnesses
Experience with NX routing and Capital Harness Designer
Experience working with safety critical hardware
Experience working on certification-path aviation development projects
Experience testing hardware to DO-160 requirements
A love of spatial packaging
Be logical, inquisitive, and eager to both teach and learn
We're a growing, motivated, fast-paced team of aviation professionals. We move quickly, and everyone wears multiple hats. We're looking for someone who is diligent and detail-oriented who can join our team and make an immediate impact.
The position will be located at our facility in Mountain View, California.
Must be willing to travel up to 10% of the time.
The estimated salary range for this position is $118,000 to $170,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $118K - $170K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
The Avionics Hardware team is a small group of highly motivated engineers who develop the core compute, actuation, sensing, and power electronics products at the heart of our automation system. We enjoy cradle-to-grave hardware ownership and hands-on test, iteration, and deployment of our designs. As a Sr Avionics Hardware Engineer, you will lead development of electrical components and sub-systems across our airborne and test platforms from the circuit-board level up through integrated systems and everything in between.
Responsibilities
In your role as Sr Avionics Hardware Engineer, you will design, analyze, document, test, and troubleshoot electronic assemblies at the circuit board through integrated electro-mechanical level. You will collaborate with a cross-functional team of electrical, mechanical, software, manufacturing and test engineers as the expert on your hardware. You will drive improvements to the hardware through benchtop, environmental, and on-aircraft testing, and perform root-cause investigations to characterize, document, and rectify anomalous behavior in a safety-critical environment. You will contribute to continuous improvement of the team's development processes and practices through technical leadership.
Basic Success Criteria
Bachelor's degree in electrical engineering, computer engineering, or equivalent experience
5+ years of full-lifecycle hardware development experience in a professional environment
Experience developing and simulating complex and manufacturable printed circuit board assemblies using tools such as Altium Designer and SPICE
Ability to work within a team, including excellent written and verbal communication skills
Ability to methodically diagnose, document, and solve electronic hardware problems
Preferred Criteria
Advanced degree in electrical engineering or computer engineering
Experience with aviation development assurance standards (e.g. RTCA/DO-254 for Level A/B items or equivalent)
Experience designing electronics to meet rigorous environmental standards (aerospace, military, automotive, or harsh industrial)
Deep expertise in high-speed digital design, mixed-signal design, RF design, and/or power electronics design
Proficiency with Python and/or MATLAB for analysis, data review, and test setup scripting
Ability to work both independently and as a leader of a high performing team
We're a growing, motivated, fast-paced team of avionics professionals. We move quickly, and everyone wears multiple hats. We're looking for someone who is diligent and detail-oriented who can join our team and make an immediate impact.
This role is on-site in Mountain View, CA.
Must be willing to travel 10% of the time.
The estimated salary range for this position is $188,000 to $250,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $188K - $250K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Senior Flight Test Engineer at Reliable Robotics, you will be a part of the Flight Test and Integration team. The Flight Test and Integration team is responsible for multiple installation and test efforts at Reliable Robotics. The team regularly ensures the proper function of mechanical, electrical, and flight control systems onboard the aircraft. In addition, this team has ownership over all ground and flight test operations within the organization. The team is composed of individuals with experience developing experimental and certification products.
Responsibilities
In your role as Senior Flight Test Engineer, you will verify the function and capabilities of modified flight control systems, for a remotely operated autoflight system. You will ensure the proper build-up of functions and capabilities, beginning in the lab and ending up on the vehicle. You will be expected to verify the end-to-end functionality of the system and ensure the ability to assess all desired test requirements. This will require engaging with many teams throughout the organization and having a firm understanding of the vehicle's capabilities. As part of the flight test campaigns, you'll act as the responsible engineer for the vehicle and often as test director.
Basic Success Criteria
Bachelor's Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or related discipline
7+ years of experimental flight test experience
Prior experience drafting test plans, test cards, test hazard analyses, and acting as test director during a flight/mission
Experience with making aeronautical VHF radio calls
Demonstrated ability to complete system-level risk assessments
Preferred Criteria
Graduate of an SETP recognized flight test school
Bachelor's degree or higher in an engineering or science discipline or equivalent industry experience
Recent Caravan or PT6A experience
Diversity of experience in multiple aircraft/ airframes
CFII or military flight instructor
Experience with automated and/or large remotely operated vehicles (UAS, spacecraft, etc)
Experience working in a Flight Test program focused on Certification
Experience in developing flight procedures, training curricula, and safety management systems
Experience flying for a 14 CFR part 135 or 121 Air Carrier
Deep understanding of FAA certification processes and their implementation
In depth knowledge of systems engineering processes and principles
Basic familiarity with software programming principles
Must be willing to travel up to 10% of the time.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $190K - $260K
Apply for this JobBCforward is currently seeking Test Scorer in EST and CST zones.
Position Title: Test Evaluator (Remote EST/CST)
Location: Remote (Only EST & CST)
Anticipated Start Date: ASAP
Duration: 2 months
Job Type: Contract
Shift: Monday-Friday 8:30am-4:00pm
Note: Must have bachelor's degree from accredited university and must have own equipment (Computer/laptop) with Good Internet Connectivity to WFH.
Pay Rate: $18.00/hr. on W2.
Note: Must successfully pass an initial assessment
Position Overview:
The Test Scoring/Reader position involves hand-scoring tests that contain constructed responses, such as essays, math problems requiring shown work, or written answers. These responses must be scored by a live person because they cannot be evaluated mechanically.
Tests may be completed online. For online tests, scorers log into the system to review and score responses.
Scoring is based on criteria established by each State Department of Education. You will be trained in these standards and scoring methods. The first one to two days of each project are dedicated to training. At the end of training, you must pass a qualifying test to demonstrate your ability to score accurately.
Test Scorers/Readers work in a classroom-style environment led by a Scoring Director who conducts training and overseas operations.
You must be able to work the full schedule each week, as exceptions cannot be made for other commitments. The company offers a casual work environment and pleasant atmosphere.
Job Requirements:
· Bachelor's degree from an accredited university (diploma or official transcripts required)
· Ability to work the entire duration of the project
· Comfortable working at a desk and on a computer all day
· No absences permitted during the first week for any reason
Computer Requirements:
· Laptop or desktop computer
· High-speed internet
· Google Chrome
· Audio, video, and microphone capabilities
· Quiet workspace
Remote working/work at home options are available for this role.
This role focuses on the design, construction, and modification of pipeline and terminal facilities, with an emphasis on electrical and instrumentation systems(PLC's, ProLogic, Flow Meters, Acculode to Multilode) at the terminals.
The Engineer will serve as a technical specialist, developing scopes of work, engineering designs, and collaborating with interdisciplinary teams to deliver safe, efficient, and compliant projects.
Essential Duties and Responsibilities • System Design & Modification: Engineer electrical and instrumentation systems for new facilities and upgrades to existing pipeline and terminal infrastructure.
Does not need an expert in CAD • Standards Compliance: Apply NEC, NFPA, API standards, and other applicable codes to ensure safe and reliable operations.
• Control Systems Integration: Design and implement process control systems, including SCADA, PLCs, Terminal Management Systems, IT/OT considerations, and hazardous area classifications.
• Technical Documentation: Develop logic diagrams, cause-and-effect matrices, control narratives, and detailed wiring and termination drawings.
• Project Scoping: Define technical requirements and scope of work in collaboration with stakeholders.
• Electrical Engineering: Design low- and medium-voltage power distribution systems, control circuits, and instrumentation wiring for PLC's and Flow Meters.
Currently using Acculode • Procurement & Costing: Prepare equipment specifications, procurement packages, and cost estimates for budgeting purposes.
• Operational Support: Troubleshoot technical issues and assist with commissioning and Pre-Startup Safety Reviews (PSSR).
• Vendor Coordination: Review and evaluate vendor proposals for equipment purchases and modernization projects.
• Continuous Improvement: Stay current with emerging technologies and best practices in electrical and instrumentation engineering.
Experience: • Minimum 5 years of industrial experience in electrical and instrumentation design for pipeline and terminal facilities.
• Proficiency in electrical schematics, wiring diagrams, conduit layouts, instrumentation loops, and PLC hardware.
• Experience selecting electrical equipment for classified areas.
Preferred: • Professional Engineer (PE) registration.
Education: • Bachelor's degree in Electrical Engineering or Controls Engineering (or equivalent).
• Ten years of applicable experience preferred.
Skills and Competencies • Ability to interpret P&IDs, electrical one-line diagrams, and instrument drawings.
• Expertise in hazardous location wiring practices, panel design, and PLC hardware.
• Strong communication, organizational, and time-management skills.
• Advanced mathematical and analytical capabilities.
• Preferred: Familiarity with Toptech and DTN loading systems.
Work Conditions • Office/Remote-based with up to 25% travel.
• Exposure to varying weather conditions; ability to work outdoors.
• Physical requirements include lifting up to 50 lbs, climbing up to 200 ft, and working in confined spaces.
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Engineer, Quality Complaint Investigation (CAPA)
- Hybrid Duration: 9 Months Location: Hybrid at Skaneateles, NY Local candidates preferred Will consider relocation candidates Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: I.
SUMMARY: This description outlines the employment prerequisites and job responsibilities for the position of Engineer, Quality Complaint Investigation.
II.
ESSENTIAL FUNCTIONS: This position has primary responsibility for investigation, review, and completion of all Quality Engineering complaint issue analysis tasks utilizing various quality system inputs.
Review individual complaints and associated service data to determine risk level and complete investigation into the as determined problem code and cause codes for each complaint.
Analyze data from various quality inputs (including but not limited to: Field Corrective Action (FCA), Complaints, FDA Medical Device Reports (MDR), etc.) to determine trends and systemic issues.
Prepare and issue reports based on information analysis.
Review existing investigation reports and identify gaps for GMP compliance.
Develop strategies and plans to close the gaps in an efficient and technical manner.
Develop and communicate expectations for quality performance, continuous improvement, and process controls for marketed products.
Monitor and drive corrective action and continuous improvement activities that directly impact performance measures by performing primary investigations, conducting data analysis, and implementing corrective actions.
Conduct or lead corrective and preventive actions in manufacturing using formal problem-solving tools and documentation.
Support CAPA and maintenance activities for existing product lines.
Recommend and/or support projects for improvements to the quality system as approved by management.
III.
QUALIFICATIONS, KNOWLEDGE, AND SKILLS REQUIRED Medical Device Experience with knowledge of 21CFR820 preferred.
Investigational research skills Experience with any statistical software packages (Minitab a plus) Desired experience in the medical device industry in the development and deployment of Quality Systems, process controls, and continuous improvement methods.
Knowledge and working application of FDA cGMP; ANSI/ISO/ASQC requirements; CMDAS (optional).
Knowledge and working application of reading and understanding blueprints and technical drawings.
Demonstrated strong analytical problem-solving (Root Cause Investigations.
Display a solid technical understanding of engineering principles and procedures (e.g., CAD and its application or scheduling a series of technical tasks utilizing software-based tools).
Computer competency in Word, Excel, PowerPoint, Minitab, Access, and databases.
Ability to multitask and methodically manage projects.
IV.
EDUCATION/EXPERIENCE REQUIRED A Bachelor of Science degree in Engineering 1-3 years of Medical Device experience V.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee: Must be able to sit for long periods of time Must have good hand-to-eye coordination and dexterity Physical Requirements: Dynamic Lifting capability: Must have the ability to lift 40 pounds at a time.
VI.
WORK ENVIRONMENT Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This is a manufacturing environment regulated by the FDA and many other work rules to prevent damage to the product we manufacture.
Some of those work rules include, but are not limited to: Wearing a static protective smock at all times while in the work area Wearing a ground wrist strap and plugging that wrist strap into the working table.
Working in proximity to other employees.
Working in an environment that is temperature and humidity-controlled.
Responsibilities: Will be addressing customer complaints and leading complaints investigation.
Identify RCA.
Collaborates with the Engineer, Product service teams and follow-up on service updates.
Quality experience is preferred 2 years would be ideal.
Good to have experience in technical writing and handling class ii medical device.
Will be writing customer feedback letter addressing customer issues and root-cause findings.
Will support the functions of NCQ, CAPA, Audit.
Current team has 2 perm, 3 contract, backfill will be for the 3rd.
Getting about 1000 complaints a month, want to keep it less than 100 actions a week.
Looking for a good communicator who is good at follow-ups.
Proficiency with SAP, ETQ, Trackwise will be preferred.
Will be onsite for Team meeting, addressing complaints, once a month data trending, warehouse visits when required.
Education: Bachelors is a must have.
Interview: Remote/ virtual screening with final onsite interview.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP, Medical Device, Quality Systems, EtQ
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Lavanya, at (224) 369-0873 Title: Sr Analytics Implementation Engineer (Web and Mobile)
- Remote Location: Remote Duration: 2 Months Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Preferred Time Zone: Eastern or central preferred, but any US time zone is fine Purpose of Role The Analytics Technology branch of the Business Analytics Team focuses on data capture, tool administration, and data architecture/enablement of global web and mobile app data for client The mission of Analytics Technology is to govern, centralize, and democratize eComm data sources to enable a holistic view of our shoppers (not just buyers).
This foundation enables running analytics at scale, eComm insights, and advancing the capabilities of all analytics teams.
As an Analytics Engineer, you will: Support platform migration projects by preventing and resolving analytics tracking issues on websites and native apps.
Implement and enhance analytics tracking on all platforms.
Debug and troubleshoot configurations and integrations Adobe MobileSDK and Kotlin KMP, clearly communicating findings to responsible teams.
Lead or support the upgrade of analytics implementations ensuring data continuity, privacy compliance, and performance optimization.
QualificationsRequired Passionate about data and a champion for analytics governance and enablement to support 300 global business users.
Extensive experience with tag managers, specifically Tealium and Adobe Data Collection (Launch).
Skilled at performing and documenting beacon tests using Adobe Assurance, AEP Debugger, and Omnibug.
Reliable partner with strong communication and collaboration skills.
Expert at troubleshooting and debugging web/mobile analytics implementations.
Experience validating tagging implementations using Adobe Workspace.
Familiarity with data layers, tag management, processing rules, and mobile SDK context data variables.
Hands-on experience upgrading analytics implementations through platform and library transitions Differentiators Demonstrated experience in process improvement and documentation.
Experience with Kotlin Multiplatform for mobile analytics implementations or cross-platform tagging strategies.
Ability to create tagging business requirements and collaborate with developers.
Strong bridge between business and technical teams, with attention to detail.
Experience with workflow tools like Atlassian JIRA or Asana.
Experience extracting/analyzing hit-level data in SQL.
Working knowledge of Adobe Analytics reporting tools: Analysis Workspace, Data Warehouse, Processing Rules, and Classifications.
Experience with Kotlin Multiplatform for mobile analytics implementations or cross-platform tagging strategies Team Size: Our team has 3 existing people.
This engineer will work with Dev and Engineering teams as well.
Required Technologies: Adobe Experience Platform (AEP) Mobile SDK, AEP Assurance Preferred (Nice-to-Have) Technologies: Android development,iOS development, Kotlin Multiplatform (KMP), lifecycle and navigation-based tracking, Mobile data layer design Minimum Years of Experience Required: 3 Training Duration: 1-5 days, depending on experience.
We expect this person to contribute almost immediately Travel Requirements (If Any): None Interview Process: Group/individual interviews.
Possibly a questionnaire to pre-screen applicants About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
mobile SDK, Adobe Experience Platform
Remote working/work at home options are available for this role.
- Hybrid
- Direct hire!! This Jobot Job is hosted by: Brandon DeDeker Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $80,000
- $130,000 per year A bit about us: We are a boutique, progressive, and growing engineering and project management firm committed to delivering smart solutions that positively impact our clients' lives.
We are looking to add a piping designer to our growing piping group! Why join us? Exciting opportunity to work on a wide range of projects Collaborate with diverse teams of engineers from other disciplines and industries.
Manage projects to meet critical deadlines and engineering budgets.
Opportunity for professional growth and development.
Work with a team of exceptional individuals who share a passion for innovation and customer satisfaction.
Job Details Work with vendors, clients and the internal team to determine the piping design needs Responsibilities: Assist in designing and laying out projects under the guidance of a Lead Designer or Engineer.
Proficiently use AutoCAD Plant3D and/or Solid Edge for 3D modeling, utilizing provided Point Cloud 3D scans for engineering packages.
Create equipment layout, piping layout, general arrangement drawings, piping isometrics, and P&ID drawings.
Conduct fieldwork, including walk downs of current systems, locating tie-ins, and taking measurements.
Document detailed field notes that are easily understandable by others.
Design piping systems based on project scope using P&ID's and specifications, adhering to applicable design standards.
Review project parameters related to piping requirements.
Develop preliminary Bills of Materials for piping design.
Office-based work with occasional short-term field assignments.
Qualifications: Associates degree in mechanical/process design with 3-D modeling.
Preferred minimum of 8 years of experience.
Working knowledge of industry-standard drafting practices, good mechanical aptitude, and general knowledge of Piping Engineering.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
