Jobs in South Prairie Washington

NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.

Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.

If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .

AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.

Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.

Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).

GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.

You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.

Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.

Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.

The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.

Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.

Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.

Locations are offered based on the current needs of the service at that time.

Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.

Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.

Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.

Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.

Collecting, refining, and analyzing strategic and tactical intelligence.

Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.

See the U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.

You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.

Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.

Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.

Highly skilled in writing comprehensive arrest, criminal and incident reports.

Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.

Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.

OR GS-11 Education Substitution for experience: A Ph.D.

or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.

OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.

This will be calculated using your resume and unofficial transcripts submitted with your application.

AND U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.

Your copies must include the expiration and capacity pages of your MMC.

Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.

It cannot be pending additional information for MMLD application process.

You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.

NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.

Please see the "Required Documents" section below for additional resume requirements.

Other Requirements Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d), or creditable service covered by Title 5 U.S.C.

8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.

This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.

Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.

3312.

You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training : This position has a training requirement.

You may be required to successfully complete the training requirement as a condition of employment.

Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply Click the Apply button on this site.

You will be linked to the CBP Talent Network registration page.

For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.

You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.

Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.

Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.

If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .

AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.

Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.

Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).

GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.

You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.

Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.

Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.

The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.

Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.

Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.

Locations are offered based on the current needs of the service at that time.

Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.

Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.

Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.

Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.

Collecting, refining, and analyzing strategic and tactical intelligence.

Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.

See the U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.

You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.

Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.

Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.

Highly skilled in writing comprehensive arrest, criminal and incident reports.

Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.

Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.

OR GS-11 Education Substitution for experience: A Ph.D.

or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.

OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.

This will be calculated using your resume and unofficial transcripts submitted with your application.

AND U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.

Your copies must include the expiration and capacity pages of your MMC.

Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.

It cannot be pending additional information for MMLD application process.

You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.

NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.

Please see the "Required Documents" section below for additional resume requirements.

Other Requirements Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d), or creditable service covered by Title 5 U.S.C.

8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.

This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.

Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.

3312.

You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training : This position has a training requirement.

You may be required to successfully complete the training requirement as a condition of employment.

Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply Click the Apply button on this site.

You will be linked to the CBP Talent Network registration page.

For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.

You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.

Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.

Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.

If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .

AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.

Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.

Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).

GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.

You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.

Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.

Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.

The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.

Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.

Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.

Locations are offered based on the current needs of the service at that time.

Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.

Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.

Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.

Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.

Collecting, refining, and analyzing strategic and tactical intelligence.

Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.

See the U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.

You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.

Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.

Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.

Highly skilled in writing comprehensive arrest, criminal and incident reports.

Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.

Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.

OR GS-11 Education Substitution for experience: A Ph.D.

or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.

OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.

This will be calculated using your resume and unofficial transcripts submitted with your application.

AND U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.

Your copies must include the expiration and capacity pages of your MMC.

Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.

It cannot be pending additional information for MMLD application process.

You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.

NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.

Please see the "Required Documents" section below for additional resume requirements.

Other Requirements Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d), or creditable service covered by Title 5 U.S.C.

8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.

This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.

Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.

3312.

You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training : This position has a training requirement.

You may be required to successfully complete the training requirement as a condition of employment.

Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply Click the Apply button on this site.

You will be linked to the CBP Talent Network registration page.

For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.

You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.

Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

Customs and Border Protection Officer (CBPO) NEW RECRUITMENT INCENTIVES! U.S.

Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation.

If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO) , you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.

Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include: Enforcing customs, immigration, and agriculture laws and regulations.

Facilitating the flow of legitimate trade and travel.

Conducting inspections of individuals and conveyances.

Determining the admissibility of individuals for entry into the United States; and Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband.

Duty Locations – Incentives available for some locations You will be asked to provide your preference for one of the following mission-critical locations: Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando FL; Honolulu, HI; Chicago, IL; Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout River, and Buffalo NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo, Presidio, Progreso and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT; Blaine, Oroville, and Sumas, WA.

The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States.

Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO).

Salary – and Duty Location Recruitment Incentives – and Benefits Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the following locations: Arizona: Douglas, Lukeville, Nogales, San Luis California: Calexico Hawaii: Honolulu Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro Michigan: Detroit, Port Huron, Sault Sainte Marie Minnesota: Grand Portage, International Falls Montana: Raymond, Sweetgrass New York: Alexandria Bay, Champlain, Massena, Trout River North Dakota: Dunseith, Portal Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford Washington: Blaine, Oroville Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations: California: Otay Mesa, San Francisco, San Ysidro, Tecate Florida: Key West North Dakota: Pembina Annual Base Salary for newly appointed CBPOs varies as follows: GS-9 $61,111
- $124,443 per year Locality pay varies by duty location.

Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary.

Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity.

This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12.

You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level.

Promotions are at the discretion of the agency.

Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications: You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both.

Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes: Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods.

Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States.

Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security.

Conducting interviews in a law enforcement capacity for the purposes of gaining information from suspected violators of laws to determine the appropriate course of action.

The above experience will be applied in connection with the following: Ability to make rapid, accurate judgments and decisions with respect to the application of the regulations, instructions, and procedures for importing and exporting merchandise to and from the United States; or enforcement and administration of laws relating to the right of persons to enter, reside in or depart from the United States, Guam, Puerto Rico, and the U.S.

Virgin Islands.

Education Substitution: A master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B.

or J.D.

from an accredited college or university; OR Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education.

This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Other Requirements: Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years.

Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA).

The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training : You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port.

You will then attend a 101-day training program – CBP Field Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA.

This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc.

Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port.

Successful completion of the Academy is required for this position .

How to Apply: Click the Apply button on this site.

You will be linked to the CBP Talent Network page.

For Position of Interest , select Customs and Border Protection Officer.

You'll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application.

Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.

You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.

Customs and Border Protection Officer (CBPO) NEW RECRUITMENT INCENTIVES! U.S.

Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation.

If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO) , you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.

Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include: Enforcing customs, immigration, and agriculture laws and regulations.

Facilitating the flow of legitimate trade and travel.

Conducting inspections of individuals and conveyances.

Determining the admissibility of individuals for entry into the United States.

Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband.

Duty Locations – Incentives available for some locations You will be asked to provide your preference for one of the following mission-critical locations: Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando FL; Honolulu, HI; Chicago, IL; Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout River, and Buffalo NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo, Presidio, Progreso and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT; Blaine, Oroville, and Sumas, WA.

The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States.

Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO).

Salary – and Duty Location Recruitment Incentives – and Benefits Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the following locations: Arizona: Douglas, Lukeville, Nogales, San Luis California: Calexico Hawaii: Honolulu Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro Michigan: Detroit, Port Huron, Sault Sainte Marie Minnesota: Grand Portage, International Falls Montana: Raymond, Sweetgrass New York: Alexandria Bay, Champlain, Massena, Trout River North Dakota: Dunseith, Portal Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford Washington: Blaine, Oroville Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations: California: Otay Mesa, San Francisco, San Ysidro, Tecate Florida: Key West North Dakota: Pembina Annual Base Salary for newly appointed CBPOs varies as follows: GS-5 and GS-7 $40,332
- $109,952 per year Locality pay varies by duty location.

Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary.

Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity.

This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12.

You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level.

Promotions are at the discretion of the agency.

Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications: You qualify for the GS-5 grade level if you possess one of the following: Experience: A minimum of three (3) years full-time general work experience that demonstrates the ability to meet and deal with people and the ability to learn and be able to apply a body of facts; OR Education Substitution: A bachelor's degree or successful completion of a full four (4)-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of successfully completed college education AND general work experience.

This will be calculated using your resume and official or unofficial college transcripts submitted with your application.

You qualify for the GS-7 grade level if you possess one of the following: Experience: A minimum of one (1) year of specialized full-time work experience equivalent to at least the next lower grade level that includes: Performing physical inspections of people, documents or goods for criminal activity, fraud, and/or illegal operations.

Utilizing observational techniques, evaluating facts, and reviewing documentation while applying Federal, State, or local laws and regulations.

Making determinations in compliance with laws and regulations that may lead to arrests, seizure of property, fines, and/or penalties based on findings.

OR for the GS-7 grade level: Education Substitution: A bachelor's degree with Superior Academic Achievement based on (1) class standing, (2) grade-point average (3.0 or higher), or (3) honor society membership; OR one (1) full year of graduate-level education.

This education must demonstrate the knowledge, skills, and abilities necessary to do the work; OR Combination of Experience and Education: A combination of specialized work experience equivalent to the next lower grade level AND graduate level education from an accredited college or university.

This will be calculated using your resume and official or unofficial transcripts submitted with your application.

If you have previous or current law enforcement or military law enforcement experience , you may qualify at the GS-9 grade level.

See the GS-9 Job Opportunity Announcement (JOAs) at USAJOBS, the federal government's official employment site to determine if you qualify.

Other Requirements: Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years.

Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA).

The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training : You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port.

You will then attend a 101-day training program – CBP Field Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA.

This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc.

Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port.

Successful completion of the Academy is required for this position .

How to Apply: Click the Apply button on this site.

You will be linked to the CBP Talent Network page.

For Position of Interest , select Customs and Border Protection Officer.

You'll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application.

Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.

You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.

Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.

Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.

Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.

The basic requirements of a woman to serve as a surrogate are:

• Emotionally stable
• Responsible
• In good physical health
• Non-smoker
• Has had at least one successful pregnancy
• Is capable of carrying a child to full term

A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.

In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.

Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• Build Lasting Relationships: Connect with clients and their pets, becoming their trusted partner in a pet's lifelong health.
• Practice Your Best Medicine: From diagnosis to treatment, you'll lead patient care with the freedom to uphold the highest standards.
• Educate and Empower: Clearly communicate findings and treatment plans, empowering clients to make informed decisions.
• Collaborate and Grow: Work alongside a supportive paraprofessional team, contributing to a positive hospital culture.

• Doctor of Veterinary Medicine (DVM) degree.
• A valid state license and in good standing to practice.
• A collaborative spirit and a dedication to practicing the highest standard of medicine.
• Excellent communication skills with a positive, friendly attitude.

As part of the Mission Pet Health family, you get the autonomy of a local practice backed by the comprehensive benefits and resources of a larger network. The focus is on investing in you, so you can focus on what you love.

Competitive base salary and a monthly production bonus with no negative accrual.

Comprehensive coverage including Health, Dental, Vision, and more, plus Maternity Leave and 24/7 TeleDoc access.

Plan for your future with a 401k featuring a generous company match, plus Long & Short-Term Disability insurance for peace of mind.

Receive a yearly CE allowance with dedicated paid days off. Grow with leadership tracks and structured mentorship.

Tap into a nationwide community of over 20,000 veterinary professionals for collaboration and to explore your unique interests.

Company-paid Professional Liability Coverage, so you can focus on what you do best: practicing great medicine.

Mission Pet Health was founded by veterinarians on the belief that local practices thrive with clinical autonomy, collaboration, and medical excellence. The organization provides world-class support to its 850+ hospital teams on a hyper-local basis so they can focus on what matters most: the medicine, their patients, and their team culture. Learn more at .

Driving the award-winning culture are the WAG values - Work Together, Amaze, and Grow. Mission Pet Health is veterinarian-led, people-focused, and on a mission to be the best place to work in veterinary medicine.

EEO Statement: Mission Pet Health is an equal opportunity employer. We embrace diversity and are committed to creating an inclusive environment for all employees.

Holocene Drilling has attracted and retained some of the best drilling crews in the industry. We stress safety, teamwork and technical training both in the classroom and on the job. Our crews are enthusiastic, motivated and highly professional. All Drillers are well-versed in both private and large scale public works drilling projects and experienced in a variety of environmental well installation and construction techniques. We cross-train our employees, promote from within and the overall job satisfaction of our people is a top priority.

We are a respected and growing drilling firm. As a strong and growing company, we are looking for Full Time Dewatering/Drilling Lead to join our team. Deep expertise allows our team to create and implement premier solutions for any groundwater challenge. We are looking for a Dewatering Lead for our Western Washington operation.

Responsibilities:

• The Lead will have an excellent understanding of dewatering and how to implement safely.
• You will oversee and manage personnel, along with the equipment to safely install dewatering and treatment systems.
• Manage goals of daily work progress, along with work site safety Effectively communicate with supervisors and co-workers.
• In charge of reporting along with paperwork for all work done.
• Set goals for daily work progress, along with all work safety procedures.
• Maintain safe operation of all power tools, pumps, machinery and electrical equipment.
• Maintain uniformity of project site as it relates to company, state and federal regulations.

We Offer:

• Relocation packages
• Per Diem

Job Requirements

• Must have dewatering experience in various methodologies.
• Experience managing a construction/drilling crew.
• You must be are able to meet project/State/local requirements.
• Must be authorized to work in US.
• Fluent in English
• Complete a required drug and background screen.
• Possess a valid driver license with safe driving record.

Prospect Construction is a Heavy Civil Contractor that specializes in water and wastewater treatment plants, hydraulic structures/facilities, shoring systems, large concrete tanks, pump stations/process facilities, dewatering, major excavations, structural steel, process equipment, and mechanical systems. Prospect began as a General Contractor in 1998, with our first office location in Puyallup Washington. Over the last few decades, Prospect has coupled its expertise in complex projects with its vast level of self-performance to grow into one of the premier treatment plant contractors in the West. This continued growth has allowed Prospect to bring our expertise into new geographical regions, with the establishment of our offices in Missoula, Montana and Sheridan, Wyoming.

Why do we exist? Prospect Construction seeks to glorify God by providing opportunities for our employees to utilize their unique gifts through construction to benefit and serve our families, stakeholders, and community. What do we do? We construct unique, complex, and challenging projects for our clients throughout the west.

Description Summary:

The Chief Heavy Civil Estimator is responsible for leading the company’s heavy civil estimating strategy, execution, and team development across all offices. This role will oversee a group of estimators operating from a centralized estimating location and will support bids for projects throughout the company’s footprint.

This position is a key leadership role in expanding the company’s heavy civil capabilities into new and existing markets including dams and water resource infrastructure, mass grading, mining support infrastructure, underground utilities, pipelines, and large-scale site development. The Chief Heavy Civil Estimator will produce accurate, complete, and competitive estimates and will build repeatable estimating systems that drive profitable growth.

Essential Duties and Responsibilities for Civil Estimator:

• Lead and manage a team of estimators responsible for heavy civil bids across all offices.
• Assign estimating responsibilities, coordinate workloads, and ensure bid schedules are met.
• Develop and mentor estimating staff through coaching, training, and performance feedback.
• Establish clear estimating workflows, standards, review processes, and deliverables.
• Lead preparation of competitive and complete estimates for heavy civil and large development pursuits.
• Perform detailed quantity takeoffs, pricing, labor and equipment productions, and bid-leveling.
• Develop pricing strategies and collaborate with leadership to determine bid markups, general conditions, contingency, and schedule impacts.
• Coordinate bid reviews and executive-level presentations prior to submission.
• Support expansion into new heavy civil markets and project types including:
• Dams / levees / water infrastructure
• Mass grading / earthwork
• Mining and mine infrastructure
• Wet and dry utilities
• Pipeline – Water/Sewer/Oil/Gas
• Large developments and site infrastructure
• Build estimating models, assemblies, means-and-methods assumptions, and productivity benchmarks for emerging work types.
• Identify equipment needs, subcontractor requirements, and labor production assumptions to support new civil capabilities.
• Ensure all estimates include complete scope coverage, clear assumptions, and appropriate risk allocation.
• Identify project risks and opportunities including logistics, access, production constraints, seasonal impacts, and design ambiguities.
• Support constructability reviews and sequencing concepts that align with execution strategies.
• Ensure the bid complies with owner requirements, bid forms, and proposal instructions.
• Solicit subcontractor pricing and scope input for specialty work (dewatering, drilling, blasting, shoring, etc.).
• Evaluate subcontractor quotes for completeness and accuracy; manage bid leveling and scope alignment.
• Assist in development of strategic partnerships for emerging markets and scopes.
• Maintain and improve a heavy civil cost database including labor, equipment, materials, trucking, and subcontractor benchmarks.
• Track estimate performance and contribute to lessons learned based on job cost results and field feedback.
• Coordinate with operations, project management, and field leadership to validate means/methods and production assumptions.
• Participate in turnover meetings and support transition from bid to execution.
• Assist operations in early project planning, budgeting, and buyout strategy as needed.

Knowledge & Skills:

• Minimum of 10 years of experience as a Civil Construction Estimator
• Proven experience leading estimating efforts on complex heavy civil projects
• Demonstrated success managing or mentoring estimators and leading bid teams.
• Strong understanding of:
• Heavy civil means and methods
• Equipment spreads and production rates
• Construction scheduling impacts
• Labor, trucking, and material pricing models
• Risk management and bid strategy
• Advanced understanding of data analysis methods
• Familiarity with civil estimating computer software
• Ability to interpret civil plans, specs, geotechnical reports, contract terms and design documents
• Strong written and verbal communication skills and ability to present to senior leadership
• Highly organized, deadline-driven, and capable of managing multiple concurrent pursuits
• Critical-thinker and problem-solver
• BA in engineering, construction science or similar relevant field
• Experienced with HCSS and Timberline estimating software

TEC Group is partnering with a growing organization in the commercial door, frame, and hardware industry that is looking for a General Manager to run one of their key regional locations.

This role is responsible for leading the branch, developing the team, and ensuring projects and operations are running efficiently while hitting financial targets. The person in this position will play a big role in shaping the local market presence and strengthening relationships with customers and contractors.

What You’ll Be Responsible For:

• Overseeing day-to-day operations of a branch supporting project management, sales, and field coordination

• Guiding project managers through complex jobs and helping resolve challenges that come up during execution

• Tracking financial performance of projects and ensuring the office is meeting revenue and profit goals

• Reviewing forecasts, project changes, and operational metrics to keep work on track

• Developing and mentoring team members while building a strong, collaborative culture

• Working with leadership on strategic initiatives and operational improvements

• Building and maintaining relationships with general contractors, partners, and customers in the region

Background:

• Around 10+ years in the commercial door, frame, and hardware space (Division 8 / 10 / 28)

• Experience managing operations, projects, or a branch within the industry

• Comfortable owning financial performance and business results

• Strong leadership skills with experience guiding teams and improving processes

• Bachelor’s degree is helpful but not required

Compensation & Benefits:

• Base salary: $175K–$210K + performance bonus

• Medical, dental, and vision coverage

• 401(k) with company match

• HSA / FSA options

• PTO and paid holidays

If you’ve spent your career in Division 8 and want the opportunity to lead a branch and influence growth in a major market, feel free to apply.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Skin & Spar Surface Finish Technician to join our Fabrication team in Auburn, Algona and Puyallup, Washington.

Join our dynamic team as a Skin & Spar Surface Finish Tech, where precision meets innovation in the aerospace industry. In this pivotal role, you will leverage your expertise in interpreting blueprints and engineering specifications to execute meticulous surface finishing and conditioning on critical components such as milled skins and spars. Utilizing advanced templates and jigs, you will ensure optimal positioning for finishing operations, while employing a variety of hand and power tools to achieve exceptional quality standards. Your keen eye for detail will be essential as you diagnose discrepancies, perform thorough inspections, and conduct necessary rework to meet stringent gauge tolerances. Collaborating closely with supervisors and engineering teams, you will navigate complex work orders and utilize online systems to prioritize tasks effectively. Your commitment to safety and compliance will shine through as you handle hazardous materials responsibly and maintain certifications. If you are passionate about delivering excellence in aerospace manufacturing, we invite you to be a part of our mission to shape the future of flight.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, templates, detail drawings, and verbal instructions to perform surface finish/conditioning on coordination holes in milled skins and spars.

• Use templates and jigs to properly position parts for subsequent finishing operations, including reaming, countersinking, and cold work.

• Scribe tooling locations and reference lines as specified in engineering drawings and specifications.

• Diagnose and correct any detected discrepancies in parts and processes.

• Check finished parts to ensure they meet quality requirements and specifications using precision measuring instruments (e.g., micrometers, trammels, probes).

• Use hand and power tools, including air motors, reamers, and cold-work guns, to perform finishing duties on machined parts.

• Operate ground-controlled handling equipment to load, unload, and move parts within the shop.

• Perform rework as required, including filing, scraping, sanding, grinding, and hand finishing to meet gauge tolerances.

• Locate points and holes from established reference lines or index points using prints, templates, and work orders.

• Perform visual and functional checks on tools and accessories, making necessary adjustments and ensuring they are in good condition.

• Access workload using online computer systems and assign work based on priority or Team Leader direction.

• Review Work Order (W/O) to determine work requirements and ensure prior operations are complete.

• Consult with supervisor/team lead and other sources (e.g., engineering, planning, inspection) to resolve problems.

• Call for inspection or use SI&A as required throughout the process, including checking hole sizes and inspecting countersinks.

• Handle and dispose of hazardous materials in an approved manner while maintaining personal and tool certifications, ensuring compliance with safety standards.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Basic computer experience and competency.

• Experience using basic math (e.g. addition, subtraction, multiplication and division).

• 1+ years of experience or training in reading and interpreting drawings or blueprints.

• 2+ years of experience using hand tools and/or hand-held power tool

• Able to close tolerance drill within .003 and able to precision measure between .003.

• Able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications:

• 2+ years of experience providing close tolerance measurements and cuts on close tolerance holes.

• Ability to close tolerance.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 23, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.