Jobs in Santa Ana, CA

The Environmental Health & Safety Manager (EHS) is responsible to ensure compliance with all safety rules and regulations, the physical security of all company locations, and to assist individuals to be in compliance. This position is responsible for ensuring company is in compliance with all agencies (DOT, OSHA, NFPA, and EPA) regulations, training, and any other requirements by such agencies, our insurance companies, and company requirements. The EHS Manager will serve as a subject matter expert on all safety, compliance, regulatory and related insurance requirements.

Pay Range: $120,000 to $135,000.00 per year

Essential Duties and Responsibilities include the following. Other duties may be assigned.

• 
  
• Serve on local safety committees; review and discus safety needs, provide updates, training, DOT, Hazmat, OSHA and related safety and compliance information.
  
• Implement and manage a comprehensive safety training program base on OSHA and industry specific requirements.
  
• Manage the workplace ergonomics program, active response and adjustments result in negating any mandatory program requirements.
  
• Review facility procedures and work instructions consistent with ISO formatting.
  
• Develop Safety Risk Assessment procedures
  
• Provide subject matter expertise in Process Safety ensuring industry best practice.
  
• Site inspections and corrective action(s):
  
• Train and direct management to inspect facilities, work sites and equipment for violations and hazards.
  
• Provide direction to management on correcting identified problems in a timely manner.
  
• Follow up to make sure all corrective actions were taken and completed.
  
• Assist where needed.
  
• Responsible for updating, maintaining and auditing location safety standards and procedures on a quarterly or annual basis as needed.
  
• Develop effective training programs for managers/employees that will efficiently cover all needed/required materials.
  
• Investigate all accidents to determine the root cause and provide recommendations that eliminate or reduce future hazard or risk.
  
• Track and control inventory of safety supplies and equipment and work with division managers to keep adequate safety supplies on-hand.
  
• Assist with training for new hires and provide ongoing training of all employees.
  
• Review and update MSDS and SPCC plans as needed
  
• Evaluate the effectiveness of the safety program using established goals and make recommendations, and implement corrective action(s) based on industry standards and best practices.
  
• Conduct an annual training for the site that promotes a safe, healthy, and secure work environment that includes emergency situations (like tornados, fires), use of the alarm system, and anything else necessary to promote a safe work environment.
  
• Serves as a safety/compliance liaison with outside organizations.
  

Required Skills:

? Extensive knowledge of OSHA, DOT, NFPA, EPA, other governmental regulations and laws including OSHA 300 logs and requirements by our insurance providers.

? Knowledge of instructional methods and training techniques

Qualifications:

? Bachelor's degree in safety or related field or equivalent work experience.

? 5 years safety management experience.

? Excellent interpersonal, communication, and problem solving skills.

? Knowledge of statistics, data collection and analysis.

? Knowledge of federal and state regulations.

? Proficient in MS Office products.

? Occasional travel required.

Prefer:

? OSHA General Industry 10 or 30 hour training course

? Forklift training experience

This position is currently accepting applications.

Apply Now

The Quality Inspector is responsible for the inspection, documentation, and certification of critical components throughout the production process, including parts subject to flight safety requirements. This role ensures compliance with AS9100, customer specifications, and regulatory requirements through precise measurement and rigorous recordkeeping.

Essential Duties & Responsibilities:

Performs various inspection activities utilizing precision inspection equipment at all phases of product manufacturing. Uses GD&T concepts, customer supplied specifications, and internal standards, to ensure compliance with AS9100, NADCAP, and other regulatory requirements.

Pay Range: $30.00 to $36.00 per hour

• 
  
• Read and understand complex engineering drawings to determine dimensions and tolerance specifications
  
• Compare recorded measurements to blueprint dimensions and tolerances and notify specified persons of discrepancies using NCF and MRB process
  
• Familiarity with the use of various inspection and measurement equipment, i.e. CMM, FARO Arm, Borescope, Optical Comparator, etc. preferred
  
• Strong understanding of units of measure and applicability to GD&T principles
  
• Must be self-motivated and able to adjust to a dynamic work environment and tempo while maintaining a high level of attention to detail.
  
• Strong professional ethics combined with the ability to function well on teams.
  

• 
  
• Experience in aerospace manufacturing or similarly regulated industry preferred.
  
• Familiarity with performing various inspection activities to include, i.e., 1st piece, in-process, final inspections
  
• High School Diploma or GED
  
• Knowledgeable of MS Word, and Excel
  
• Minimum of 3 to 5 years' experience in the operation of CMM's preferred (Mitutoyo/Metris/Zeiss)
  
• Familiarity with operation/programming of FARO arm preferred
  

This position is currently accepting applications.

Apply Now

Who Are We?

Stand Out For Good, Inc. is a rapidly growing women’s fashion company with 5 unique brands, in 130+ locations, across 38 states. Our stores feel like a sanctuary - a place of beauty from the inside out. From welcoming experiences and warm associates to thoughtfully curated products, our brands are built upon the founding principles of giving back and making a difference in the World.

Our Mission

“Stand Out. For Good”. At Altar’d State, those four words are more than just our motto, they are why we exist. From Mission Mondays, where 10% of our net proceeds go directly to local charitable organizations, to our long-standing partnership with Coprodeli USA, in which we are in the process of building 22 schools for impoverished communities in Peru, we are committed to giving back in meaningful ways to those in need.

We are seeking a creative and passionate Print Design Intern to join our growing, dynamic team in our Orange County, CA Design Studio. This Design Internship offers a unique opportunity for aspiring fashion designers to gain hands-on experience in the industry. The Design Intern will contribute to the creation of fresh, innovative collections that align with the brand’s vision. The Intern will work closely with the Design team to assist in various aspects of the design process, from concept development to final product creation.

Key Responsibilities

• Stay up-to-date with Print and Art trends, conduct market research, and gather inspiration from various sources to inform design decisions.
• Create prints, plaids, embroideries, graphics and other artworks.
• Prepare artwork for production: scaling, color callouts and sending to vendors.
• Use Adobe Photoshop and illustrator to create and set up production ready artwork.
• Creating original textile prints, recolors, manipulating repeats and scales,
• Assist in choosing colors and building seasonal color palettes
• Collaborate with the Design team on artwork needs
• Produce tech packs including sketches, artwork, construction details, and sewing instructions.
• Participate in fittings to evaluate fit and make necessary adjustments.
• Maintain organized design records, including sketches, prints, submits and samples.
• Actively participate in design critiques and incorporate feedback to improve design concepts and prototypes.

Qualifications

• Currently pursuing or recently completed a degree in Fashion Design or Apparel Design.
• A strong passion for women's fashion and trends.
• Proficiency in sketching by hand or digitally and knowledge of design software including Adobe Illustrator and Photoshop.
• Basic knowledge of fibers and fabrics.
• Strong communication and collaboration skills.
• Detail-oriented with a keen eye for aesthetics.
• Eagerness to learn and adapt in a fast-paced, creative environment.

Stand Out For Good, Inc. is an equal opportunity employer and values diversity. All employment decisions are decided on the basis of qualification, merit and business need. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex or national origin.

We are proud to share that our associates have made us one of Fortune's Best Companies to Work For! Recently, our team has received the following recognition:

• #73 in Fortune 100 Best Companies to Work For® 2023
• #4 in Fortune Best Workplaces in Retail™ 2022
• #93 in Best Workplaces for Millennials™ 2023
• #34 in Fortune Best Workplaces for Women™ 2022

We are a Southern California-based consulting firm specializing in land use planning, entitlements, and CEQA compliance for complex real estate and infrastructure projects. Our strategic, solution-oriented approach helps clients navigate regulatory processes from due diligence through approvals. With a strong track record and deep relationships with agencies, we deliver certainty and results across both public and private sector developments.

We’re seeking a Land Use Project Manager who is passionate, strategic, and ready to lead high‐impact real estate entitlement and post‐entitlement efforts through California’s rigorous environmental review process (CEQA). You’ll champion projects from feasibility through construction, ensuring timely approvals while safeguarding environmental integrity.

Salary and Other Compensation:

• The annual salary for this position is between $120K-$150K + bonus. Factors which may affect pay within this range may include geography/market, skills, education, experience and other qualifications of the successful candidate.
• Full Benefits Package:
• Comprehensive Health, Dental & Vision Plans
• 401(k) with Company Match
• Paid Time Off & Holiday Schedule
• Professional Development & Certification Support
• Flexible/Hybrid Work Options

Key Responsibilities and Requirements

• Drive entitlement strategy: coordinate with planners, architects, and legal counsel.
• Prepare and manage applications for zoning, conditional use permits, variances, and general plan amendments.
• Lead coordination meetings and ensure all conditions of approval are met.
• Strong CEQA Expertise:
• Direct preparation and review of Initial Studies, Environmental Impact Reports (EIRs), Negative Declarations, and Mitigated Negative Declarations.
• Collaborate with environmental consultants, community stakeholders, and agency staff to mitigate project impacts and secure CEQA clearance.
• Stakeholder Engagement:
• Cultivate strong relationships with city/county planning departments, public works, and community groups.
• Present project updates at public hearings and planning commission meetings.
• Team & Budget Management:
• Mentor junior planners, delegate tasks, and manage budgets and schedules to meet project goals.
• 5+ years in land use planning, entitlement, and post‐entitlement project management—preferably in California.
• Technical Proficiency: Deep knowledge of CEQA regulations and local planning ordinances.

What the Firm Offers

Salary and Other Compensation:

The annual salary for this position is between $120,000 and $150,000, based on experience. Factors which may affect pay within this range may include geography/market, skills, education, experience, and other qualifications of the successful candidate.

Job Title: Product Manager

Location: Irvine, CA

Reports to: Director, Product Manager

FLSA Status: Exempt

About Our Organization: RIS Rx (pronounced "RISE Rx") is on a mission to make every dollar allocated for affordability count, delivering true impact for the patients and pharma manufacturers we serve. We’ve built the industry’s first real-time, pharmacist-led GTN Revenue Performance platform, restoring trust, visibility, and integrity to patient affordability.

What sets us apart? Our team combines deep pharmacy roots with cutting-edge technology, tackling patient access barriers in smarter, more human ways. Our people-first culture means you’ll find career growth, great benefits, and a supportive environment waiting for you, because we believe when people thrive, everyone wins.

Join us and help shape a better, brighter future for patient access.

Job Summary

We are seeking an experienced Product Manager to lead the vision, strategy, and execution of innovative software solutions that address key challenges in healthcare technology. This role will focus on driving patient affordability, optimizing gross-to-net (GTN) processes, and mitigating risk for pharmaceutical manufacturers. The Product Manager will serve as the bridge between business, technical, and clinical stakeholders, ensuring products deliver measurable value and align with company objectives. The ideal candidate is a strategic thinker with strong analytical skills, a proven ability to manage the full product lifecycle, and a passion for improving outcomes in the pharmaceutical and healthcare space.

Responsibilities

• Define and own the product vision, strategy, and roadmap for software solutions that address healthcare technology challenges, including patient affordability, gross-to-net (GTN) optimization, and risk mitigation for pharmaceutical manufacturers
• Translate complex business requirements into clear product specifications, user stories, and acceptance criteria for engineering teams
• Collaborate closely with engineering, pharmacists, operations, data analysts, and business stakeholders to ensure product initiatives align with company objectives and customer needs
• Drive the full product lifecycle from ideation to launch, including requirements gathering, prioritization, development, testing, release, and post-launch evaluation
• Lead backlog grooming, sprint planning, and cross-functional standups, ensuring timely delivery of high-quality product releases
• Analyze solution usage data, industry trends, and feedback to inform product decisions and identify new opportunities for innovation and differentiation
• Partner with marketing, sales, and customer implementation teams to support go-to-market activities, product positioning, and customer adoption
• Establish and track key performance indicators (KPIs) to measure product success and drive continuous improvement
• Maintain deep awareness of pharmaceutical trends, regulatory requirements, and competitive landscape to guide long-term product strategy
• Serve as the voice of the customer and ensure that product decisions balance user needs, business objectives, and technical feasibility

Skills

• 5+ years of experience in product management, preferably in healthcare technology, SaaS, or pharmaceutical services
• Experience using product management software (e.g., Jira, Aha!) to manage roadmaps, backlogs, and requirements
• Proven track record of managing software products from concept through launch and iteration
• Strong understanding of Agile/Scrum methodologies and experience working with engineering teams in iterative development environments
• Familiarity with healthcare or pharmaceutical industry processes strongly preferred
• Experience working with cloud-based platforms (AWS or similar), data analytics tools, and software development concepts
• Strong analytical skills with ability to interpret usage data, market research, and financial metrics to drive product decisions
• Excellent leadership and collaboration skills, with experience influencing stakeholders across technical and non-technical teams
• Exceptional communication skills with the ability to explain product decisions and technical trade-offs clearly to executives, customers, and development teams
• Ability to balance strategic vision with day-to-day execution and delivery in a fast-paced environment
• Strong problem-solving skills and the ability to anticipate and resolve complex product challenges

Education

• This position requires a Bachelor’s degree; MBA or advanced degree preferred

What we offer:

• Free gym membership
• Modern office
• Annual merit-based salary increases
• 401(k) with annual company match
• Medical - RIS Rx covers 100% of the employee’s base HMO medical plan
• Voluntary Dental, Vision & Life Insurance
• Flexible Savings Account (FSA)
• Paid Holidays
• Time off that grows with you:
• 3 weeks PTO 0-2 years
• 4 weeks PTO after 3+ years
• 5 weeks PTO after 5+ years
• Recognition programs that celebrate impact and results
• Mentorship and coaching opportunities
• Clear growth paths and career development support
• Fully stocked snack kitchen
• Company-paid lunches

Mechanical Engineer – Aerospace Thermal Management Systems (Integration & Packaging)

Location: Onsite – Irvine CA

Industry: Aerospace & Defense

Duration: 6 months and extendable

Role Overview

We are seeking two highly skilled Mechanical Engineers with experience in the Aerospace & Defense sector to support the development and integration of advanced thermal management subsystems used across military and commercial platforms globally.

This role focuses on mechanical subsystem development from a packaging and integration perspective, including enclosure design and integration of electronic and fluid control components such as pumps, compressors, fans, and valves. The ideal candidate has hands-on experience developing aerospace-grade subsystems within defined volume and interface constraints, ensuring high reliability, environmental robustness, and compliance with industry standards.

These roles will support programs progressing from Preliminary Design Review (PDR) toward Critical Design Review (CDR) and will involve reuse and adaptation of existing product architectures.

Key Responsibilities

• Design and develop mechanical enclosures for aerospace electronic and control subsystems such as thermal management systems and related subsystems
• Package and integrate COTS and custom components into customer-defined volume constraints by integrating components including pumps, compressors, fans, valves, and control electronics
• Develop detailed CAD models, assemblies, and manufacturing drawings (SolidWorks preferred)
• Conduct tolerance analysis, GD&T, stack-up analysis, and design for manufacturability (DFM)
• Support prototype builds, integration activities, testing, and validation
• Implement design considerations to satisfy and qualify the environmental requirements (shock, vibration, temperature, humidity, EMI/EMC interface considerations) per MIL standards.
• Collaborate with electrical, controls, thermal, structural, and systems engineering teams
• Participate in root cause analysis and design refinement
• Ensure compliance with aerospace and defense standards and documentation practices

Required Qualifications

• Bachelor’s degree in mechanical engineering or equivalent.
• 5+ years of experience in Aerospace & Defense mechanical subsystem development
• U.S. Citizen (No Dual Citizenship)
• Strong mechanical packaging and integration experience
• Experience designing enclosures housing electronics and fluid/mechanical components
• Exposure to thermal management systems (ECS, vapor cycle, or liquid cooling preferred but not mandatory)
• Working knowledge of rotating machinery components (fans, compressors, pumps)
• Proficiency in CAD tools (SolidWorks preferred; strong experience in other platforms acceptable)
• Experience with GD&T and tolerance analysis
• Familiarity with aerospace environmental standards (MIL-STD preferred)
• Experience supporting qualification and validation testing
• Strong understanding of materials selection for aerospace applications
• Ability to work in cross-functional engineering teams

Preferred Qualifications

• Experience packaging turbomachinery components within constrained aerospace envelopes
• Exposure to controls systems integration
• Knowledge of vibration isolation and shock mitigation techniques
• Experience supporting PDR/CDR processes
• Familiarity with configuration management and aerospace documentation rigor
• Exposure to FMEA, reliability analysis, and lifecycle support

Senior Estimator – Commercial (Warehouses & Automotive Facilities)

We are seeking an experienced Senior Estimator to lead preconstruction and estimating efforts for ground-up and renovation projects, with a focus on warehouse and automotive dealership builds. This role is responsible for developing accurate budgets, managing bid processes, and collaborating with internal teams and clients to ensure projects are set up for success from the earliest stages.

Responsibilities:

• Prepare detailed cost estimates for ground-up and renovation projects
• Lead estimating efforts for warehouses, distribution centers, and car dealerships
• Analyze drawings, specifications, and project documents to develop accurate budgets
• Solicit and evaluate subcontractor and vendor bids
• Manage takeoffs, scope reviews, and bid leveling
• Collaborate with project managers, subcontractors, and preconstruction teams
• Communicate with owners, architects, and stakeholders during the preconstruction phase

Qualifications:

• Proven experience estimating warehouse and automotive dealership projects
• Strong analytical, organizational, and communication skills

Benefits:

• Competitive base salary with bonus potential
• Health, dental, and vision insurance
• 401(k) with company match
• Paid time off and holidays
• Vehicle allowance or mileage reimbursement