Jobs in Rowlett Texas

A MISSION WORTHY OF A CAREER!

If you're looking for "just a job," then stop reading right now. But, if you're looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S. Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent.

USBP is hiring immediately to fill full-time,entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify. Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America.

Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below).

Salary and Benefits

Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632 - $92,219 per year. Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be eligible for up to $20,000 in incentives. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duty Locations

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. RELOCATION MAY BE REQUIRED.

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:

• Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa

• Buffalo Sector Stations - Wellesley Island

• Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde

• El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta

• El Centro Sector Stations - El Centro, Indio, Calexico

• Grand Forks Sector Stations - Pembina

• Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass

• Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren

• Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata

• Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen

• San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente

• Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville

• Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford

• Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox

• Yuma Sector Stations - Blythe, Yuma, Wellton

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
• Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

• Make sound judgments and decisions in the use of firearms.
• Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
• Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

A MISSION WORTHY OF A CAREER!

If you're looking for "just a job," then stop reading right now. But, if you're looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S. Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent.

USBP is hiring immediately to fill full-time,entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify. Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America.

Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below).

Salary and Benefits

Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632 - $92,219 per year. Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be eligible for up to $20,000 in incentives. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duty Locations

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. RELOCATION MAY BE REQUIRED.

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:

• Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa

• Buffalo Sector Stations - Wellesley Island

• Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde

• El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta

• El Centro Sector Stations - El Centro, Indio, Calexico

• Grand Forks Sector Stations - Pembina

• Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass

• Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren

• Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata

• Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen

• San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente

• Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville

• Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford

• Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox

• Yuma Sector Stations - Blythe, Yuma, Wellton

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
• Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

• Make sound judgments and decisions in the use of firearms.
• Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
• Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Position Purpose:

Whitmore Manufacturing, an CSW Industrials affiliated business, is a global provider of innovative products and services that increase the reliability, performance, and lifespan of industrial assets. We manufacture high performance lubricants, friction modifiers, application equipment, lubrication management systems, desiccant breathers and cleaners designed to meet the specific needs of each industry and application. Industrial customers worldwide rely on Whitmore to deliver the performance engineered solutions industry counts on even in the most adverse conditions and demanding environments.

Job Responsibilities:

• Supervise and lead a team of production workers, providing guidance, training, and support as needed.
• Assign daily work orders to the Small-Fill team to ensure efficient production flow.
• Coordinate closely with the Shuttle Tank crew to ensure production schedules align with required ship dates.
• Foster a positive work environment that encourages teamwork, collaboration, and a commitment to excellence.
• Enforce and uphold quality control standards to ensure that products meet or exceed customer expectations.
• Implement and monitor quality assurance processes, addressing any deviations promptly.
• Ensure a safe working environment by enforcing safety policies and procedures.
• Conduct regular safety meetings, inspections, and audits to identify and address potential hazards.
• Track key performance indicators (KPIs) to assess the efficiency and effectiveness of production processes.
• Implement corrective actions to address deviations from performance targets.
• Communicate effectively with other departments, such as logistics, planning, maintenance, and quality control, to ensure a smooth production flow.
• Identify training needs within the production team and coordinate training sessions to enhance skills and knowledge.
• Foster a culture of continuous learning and improvement.
• Collaborates with Supply Chain and Sales to align production targets with customer requirements. Ensures the timely fulfillment of production schedules.
• Oversee individual performance and provide constructive feedback.
• Other duties as assigned by your supervisor.

Requirements:

• Bachelor's degree in a related field (or equivalent work experience).
• Proven experience in a production supervisory role, preferably in manufacturing.
• Strong leadership and interpersonal skills.
• Knowledge of production processes, quality standards, and safety protocols.
• Excellent problem-solving and decision-making abilities.
• Familiarity with manufacturing software and systems.
• Ability to work in a fast-paced and dynamic environment.
• Demonstrates strong follow-through skills to efficiently conclude leads and action items.
• Upholds high ethical standards and excels in holding individuals accountable.

We recognize the importance of meaningful compensation and benefits in helping our employees care for themselves and their families. Whitmore provides competitive compensation packages and a range of benefits that contribute to the overall well-being of our team members.

Benefits:

• Competitive salary package including annual bonus
• Medical, Dental, Vision insurance
• Disability insurance
• Life insurance
• Flexible Spending Account & Health Savings Account
• Paid time off (PTO)
• Maternity & Paternity leave
• Employee Assistance Program
• Tuition reimbursement
• 401(k) $1-$1 match, up to 6% - vest immediately
• 401(k) additional profit sharing – up to 3%
• Employee Stock Ownership Plan (ESOP)
• UKG Wallet, choose when and how to get paid.

Whitmore is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, national origin, sex, age, marital status, personal appearance, sexual orientation, gender identity or expression, familial status, family responsibilities, matriculation, political affiliation, genetic information, veteran status, disability, source of income, status as a victim of an intra-family offense, and place of residence or business.

Through Whitmore Cares, our community engagement initiative, we encourage and provide opportunities for our employees to contribute to the community and make a positive impact on the lives of others. We believe in the power of giving back and actively supporting initiatives that enhance the well-being of the communities in which we live and work.

Job Description:

• Pay: Up to $90,000 Yearly  
  • Bi-Weekly pay
• Flexible schedules available - must be available overnight, home weekly.

• Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much more
• Growth opportunities performing essential work to support America’s food distribution system
• Safe and inclusive working environment, including culture of rewards, recognition, and respect

• Communicates and interacts with customers, vendors and co-workers professionally ensuring questions are answered accurately and in a timely manner.
• Functions as a team member within the department and organization, as required, and perform any duty assigned to best serve the company.
• Performs all required safety checks (i.e., pre/post trip) including inspections of tractor/truck and trailer according to Department of Transportation (DOT) regulations; inspects tractor/truck and trailer to insure they meet company safety standards and take appropriate action as needed.
• Reports all safety issues and/or repairs required.
• Follows all DOT regulations and company safe driving guidelines and policies.
• Immediately reports all safety hazards. Inspects trailer for properly loaded and secured freight.
• Performs count check of items and check customer invoices of products that have been loaded.
• Checks and completes in an accurate and in legible fashion all required paperwork associated with freight.
• Moves tractor to the loading dock and attach preloaded trailer as needed.
• Drives to and delivers customer orders according to predetermined route delivery schedule.
• Unloads products from the trailer, transports items into designated customer storage areas.
• Performs damage control checks on items, scans, and contact supervisor about removing orders according to company policy.
• Verifies delivery of items with customer and obtain proper signatures.
• Collects money (cash or checks) where required. Loads customer returns on to trailer and secures trailer doors.
• Ensures that tractor, trailer, and freight are appropriately locked and/or always secured.
• Unloads damaged goods and customer returns and bring to the driver check-in and complete necessary paperwork. Unloads all equipment, materials and remove trash from trailers as required.
• Completes daily record of hours of service and enter in log in accordance with Federal DOT, state, and company requirements.
• Performs general housekeeping duties in tractor, loading dock area and keep trailers clear and clean as required.
• At the end of the shift secure all equipment and complete all necessary paperwork.
• Performs other related duties as assigned. 

Qualifications:

Company description

Awards and Accolades

Hours of Work :

Days Of Week :

Work Shift :

Job Description :

Methodist Richardson Medical Center is seeking a full time Night Registered Respiratory Therapist to join its TEAM. This position will be located in the Bush / Renner Campus.

Your Job:
The Registered Respiratory Therapist (RRT) is responsible for a variety of therapeutic and diagnostic procedures including ABG, PFT’s, and various forms of ventilator support, oxygen and aerosol therapy, bronchial hygiene therapy and airway maintenance.  You will be expected to be proficient with the respiratory assessment and respiratory treatment of both adults and neonates. These procedures are performed under the indirect supervision of the department’s medical director, according to departmental policies and procedures.  The RRT must demonstrate the knowledge, skills, understanding and ability to care for patients of all age groups; and be sensitive to the diverse and unique needs of patients based on age, sex, race and culture.

Your Job Requirements:

• Graduate of an accredited Respiratory Care Program
• Current Basic Life Support certification required
• Current Advanced Cardio Life Support certification required
• NRP, Pediatric Advanced Life Support — must obtain within 1 year of hire
• Currently licensed in good standing as a Respiratory Care Practitioner by Texas Medical Board
• Registered by the National Board for Respiratory Care
• New Graduates are welcome to apply!

Your Job Responsibilities:

• Performs respiratory therapeutics to include oxygen administration and weaning, aerosol and humidity therapy, IPPB, Incentive Spirometry, airway maintenance, bronchial hygiene, chest physiotherapy, CPR and mechanical ventilation.   
• Performs and reports prescribed cardiopulmonary diagnostic procedures to include arterial blood gas analysis, pulse oximetry, pulmonary function studies, and electrocardiograms.
• Prepares a treatment evaluation to include a bedside respiratory physical assessment, patient interview and a review of patient’s medical record.
• Perform appropriate actions using critical thinking skills.
• Must be able to interpret the CXR, ABG, and PFT’s when reviewing patient data.
• Assembles, checks, operates and troubleshoots all cardiopulmonary equipment such as artificial airways, ventilators, oxygen analyzers, oxygen delivery devices and blood gas analyzers.
• Participates in tasks related to infection control, safety and quality assurance.
• Performs required cleaning and maintenance of all cardiopulmonary equipment and work areas.
• Utilizes appropriate customer scripting as evidenced by observation and improved patient satisfaction.
• Perform other job duties as required

• Magnet®-designated hospital
• 150 Top Places to Work in Healthcare by Becker’s Hospital Review, 2023
• Top 10 Military Friendly® Employer, Gold Designation, 2023
• Top 10 Military Spouse Friendly® Employer, 2023
• Level III Neonatal Intensive Care Unit
• Level III Trauma Center

Your opportunity

At Schwab, you're empowered to make an impact on your career. Here, innovative thought meets creative problem solving, helping us "challenge the status quo" and transform the finance industry together.

As a Client Banking Services Professional, you are at the forefront of the client experience, delivering outstanding customer service to our Charles Schwab Bank clients calling for assistance. You will field 40-60 inbound calls every day, providing subject matter expertise on the following banking products and services: deposit accounts, online account management and bill pay, money movement, mobile banking, and debit cards. This is a phone-based role requiring the use of multiple computer applications and dual monitors.

What you have

Required Qualifications

• Minimum of 1 year of work experience, which may include volunteer experience, internships, or other roles in an office environment.
• You will be working a set shift which may include weekend or evening hours. Please speak with your Talent Advisor for more information including shift differentials.
• Ability to multi-task with demonstrated experience in using multiple computing applications simultaneously.
• Ability to work in the office up to 75% - 100% of the time, as required.

Preferred Qualifications

• Active listening skills along with the ability to engage in open-ended dialogue to gain a thorough understanding of the client's financial needs.
• Dedication to resolving a variety of complex client inquiries both through technology and by working closely with business partners within Schwab to identify efficient and effective methods to meet client goals.
• Ability to establish rapport with clients over the phone to create long term relationships with Schwab.
• Desire to be part of a supportive and collaborative team.
• High attention to detail to adhere to extensive bank policies, procedures, and guidelines.
• Drive to learn from a dedicated team manager focused on helping you reach clear performance objectives by providing leadership support and on-the-job learning.

#campus

What's in it for you

At Schwab, you're empowered to shape your future. We champion your growth through meaningful work, continuous learning, and a culture of trust and collaboration—so you can build the skills to make a lasting impact. Our Hybrid Work and Flexibility approach balances our ongoing commitment to workplace flexibility, serving our clients, and our strong belief in the value of being together in person on a regular basis.

We offer a competitive benefits package that takes care of the whole you – both today and in the future:

• 401(k) with company match and Employee stock purchase plan
• Paid time for vacation, volunteering, and 28-day sabbatical after every 5 years of service for eligible positions
• Paid parental leave and family building benefits
• Tuition reimbursement
• Health, dental, and vision insurance

JOB SUMMARY

ESSENTIAL DUTIES AND RESPONSIBILITIES

·         Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
·         Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
·         Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
·         The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
·         Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
·         Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
·         In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
·         Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
·         May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

·         Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
·         Ability to define problems, collect data, establish facts, and draw valid conclusions.
·         Ability to operate a personal computer including using a Windows based operating system and related software.
·         Advanced PC skills, including training and knowledge of Jabil’s software packages.
·         Ability to write simple correspondence. Read and understand visual aid.
·         Ability to apply common sense understanding to carry out simple one- or two-step instructions.
·         Ability to deal with standardized situations with only occasional or no variables.
·         Ability to read and comprehend simple instructions, short correspondence, and memos.
·         Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
·         Ability to compute rate, ratio, and percent and to draw and interpret graphs.

Third Shift

Monday - Friday 11:00 p.m. - 7:00 .

JOB SUMMARY

Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.

First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.

ESSENTIAL DUTIES AND RESPONSIBILITIES

·         Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
·         Exhibit proficiency in the use of electronic test and measurement equipment.
·         Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
·         Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
·         Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
·         Work as a team member to achieve Diagnostic department’s process yield goals.
·         Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
·         Comply and follow all procedures within the company security policy.
·         May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

·         Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
·         Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
·         Ability to define problems, collect data, establish facts, and draw valid conclusions.
·         Ability to operate a personal computer including using a Windows based operating system and related software.
·         Advanced PC skills, including training and knowledge of Jabil’s software packages.
·         Ability to write simple correspondence. Read and understand visual aid.
·         Ability to apply common sense understanding to carry out simple one- or two-step instructions.
·         Ability to deal with standardized situations with only occasional or no variables.
·         Ability to read and comprehend simple instructions, short correspondence, and memos.
·         Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
·         Ability to compute rate, ratio, and percent and to draw and interpret graphs.

Job Summary

The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.

Job Responsibilities

• Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).

• Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.

• Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.

• Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.

• Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.

• Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.

• Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.

• Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.

• Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.

• Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.

• 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.

• Strong Knowledge of FUJI Setup, Nexim and Valor

• Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).

• In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.

• Proven track record of leading process improvement projects and achieving significant yield and cost reductions.

• Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).

• Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.

• Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.

• Familiarity with industry standards such as IPC-A-610 and J-STD-001.

• Ability to work independently and manage multiple complex projects simultaneously.

JOB SUMMARY

ESSENTIAL DUTIES AND RESPONSIBILITIES

·         Provides input for colleague’s performance appraisals
·         Assists Test Engineers when commissioning new test equipment.
·         Provides technical assistance to other technicians on the same shift.
·         Provides line support to manufacturing for all test processes.
·         Ensures “machine down” calls are responded to in a timely manner.
·         Liaises with manufacturing to determine repair priorities.
·         Ensures adequate spares are available for all allocated equipment.
·         Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
·         Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
·         Escalates to Test Engineers any unresolved/ongoing issues.
·         Instructs operators on safe/effective use of test equipment.
·         Provides daily report of all line issues.
·         Provides weekly/quarterly downtime reports for allocated equipment.
·         Sources spares from the most cost effective supplier.
·         May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

·         Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
·         Ability to define problems, collect data, establish facts, and draw valid conclusions.
·         Ability to operate a personal computer including using a Windows based operating system and related software.
·         Advanced PC skills, including training and knowledge of Jabil’s software packages.
·         Ability to write simple correspondence. Read and understand visual aid.
·         Ability to apply common sense understanding to carry out simple one- or two-step instructions.
·         Ability to deal with standardized situations with only occasional or no variables.
·         Ability to read and comprehend simple instructions, short correspondence, and memos.
·         Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
·         Ability to compute rate, ratio, and percent and to draw and interpret graphs.

Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:
·         Recruit and interview Process Technicians.
·         Communicate criteria to recruiters for Process Technician position candidates.
·         Coach technicians in the interviewing/hiring process.
·         Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:
·         Identify individual and team strengths and development needs on an ongoing basis.
·         Create and/or validate training curriculum in area of responsibility.
·         Coach and mentor Process Technicians to deliver excellence to every internal and external customer.

Performance Management:
·         Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
·         Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
·         Express pride in staff and encourage them to feel good about their accomplishments.
·         Perform team member evaluations professionally and on time.
·         Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
·         Coordinate activities of large teams and keep them focused in times of crises.
·         Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:
·         Provide communication forum for the exchange of ideas and information with the department.
·         Organize verbal and written ideas clearly and use an appropriate business style.
·         Ask questions; encourage input from team members.
·         Assess communication style of individual team members and adapt own communication style accordingly.

TECHNICAL MANAGEMENT RESPONSIBILITIES

·          Review circuit board designs for testability requirements.
·          Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
·          Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
·          Generate reports and analysis of test data, prepares documentation and recommendations.
·          Review test equipment designs, data and RMA issues with customers regularly.
·          Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
·          Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
·          Determine conditions under which tests are to be conducted and sequences and phases of test operations.
·          Direct and exercise control over operational, functional, and performance phases of tests.
·          Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
·          Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
·          Develop or use computer software and hardware to conduct tests on machinery and equipment.
·          Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
·          Provide training in new procedures to production testing staff.
·          Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
·          Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

Job Summary

The SMT Engineering Technician Night Shift will support the manufacturing process by maintaining Surface Mount Technology (SMT) equipment, troubleshooting production issues, and ensuring optimal machine performance during night operations to meet production targets.

Job Responsibilities

• Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
• Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
• Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
• Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
• Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
• Document all maintenance activities, repairs, and process changes accurately and thoroughly.
• Participate in root cause analysis for production defects and implement effective solutions.
• Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
• Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
• Flexibility to work night shifts, including weekends and holidays as required.

Job Qualifications

• Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
• Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
• Strong understanding of SMT processes, equipment operation, and common defects.
• Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
• Ability to read and interpret schematics, technical drawings, and equipment manuals.
• Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
• Familiarity with IPC standards and quality control principles.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
• Proficient in using standard hand tools, diagnostic equipment, and computers.
• Ability to lift up to 35 lbs and stand for extended periods.

Job Summary

The SMT Process Engineer IV is a senior-level technical expert responsible for optimizing and maintaining surface mount technology (SMT) processes to ensure high-quality, efficient, and cost-effective electronic assembly. This role involves advanced troubleshooting, process development, and continuous improvement initiatives across multiple SMT lines, often acting as a lead or mentor within the engineering team.

Job Responsibilities

• Lead the development, implementation, and optimization of complex SMT processes, including stencil printing, pick-and-place FUJI, reflow soldering, and automated optical inspection (AOI).

• Conduct advanced root cause analysis and implement corrective actions for SMT process defects (e.g., shorts, opens, voids, component placement issues) using statistical process control (SPC) and other analytical tools.

• Design and execute experiments (DOE) to improve SMT process robustness, yield, and throughput, focusing on new product introduction (NPI) and existing product enhancements.

• Collaborate with design engineering, manufacturing, and quality teams to ensure manufacturability (DFM) and resolve complex technical issues related to SMT assembly.

• Develop and maintain comprehensive process documentation, work instructions, and training materials for SMT operators and technicians.

• Evaluate and recommend new SMT equipment, materials, and technologies to enhance capabilities and improve manufacturing efficiency.

• Provide technical mentorship and guidance to junior engineers and manufacturing personnel on SMT best practices and problem-solving techniques.

• Drive continuous improvement projects using Lean manufacturing and Six Sigma methodologies to reduce waste and increase productivity within SMT operations.

• Monitor key performance indicators (KPIs) for SMT processes and present findings and recommendations to management.

• Ensure compliance with all relevant industry standards, safety regulations, and quality management systems (e.g., ISO, IPC).

Job Qualifications

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.

• 8+ years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.

• Expert-level knowledge of SMT equipment (e.g., printers, pick-and-place machines, reflow ovens, AOI/SPI) from various manufacturers (e.g., Fuji, Universal, Koh Young, Agilent).

• Deep understanding of IPC-A-610 and J-STD-001 standards.

• Proficiency in statistical process control (SPC), design of experiments (DOE), and advanced problem-solving methodologies (e.g., 8D, Six Sigma).

• Strong analytical skills with the ability to interpret complex data and make data-driven decisions.

• Demonstrated ability to lead technical projects and drive process improvements.

• Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and mentor others.

• Experience with CAD/CAM software for SMT programming and DFM analysis is a plus.

• Ability to work effectively in a fast-paced, dynamic manufacturing environment.

Job Summary

The SMT Engineering Tech will be responsible for supporting the surface mount technology (SMT) production lines, ensuring efficient operation, high-quality output, and continuous improvement through troubleshooting, maintenance, and process optimization.

Job Responsibilities

• Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
• Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
• Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
• Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
• Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
• Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
• Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
• Maintain accurate records of equipment maintenance, process parameters, and production issues.
• Adhere to all safety protocols and quality standards within the SMT department.

Job Qualifications

• Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
• Minimum of 2-4 years of experience working with SMT production lines and equipment.
• Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
• Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
• Ability to read and interpret technical drawings, schematics, and process specifications.
• Excellent problem-solving skills and a methodical approach to troubleshooting.
• Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
• Ability to work independently and as part of a team in a fast-paced manufacturing environment.
• Familiarity with IPC standards (e.g., IPC-A-610) is a plus.

Border Patrol Agent (BPA) Entry Level

NEW RECRUITMENT AND RETENTION INCENTIVES!

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.

Salary and Benefits

Annual Base Salary for newly appointed BPAs varies per grade, as follows:

GL-5/GL-7 $49,739 - $89,518 per year

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
• Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

• Make sound judgments and decisions in the use of firearms.
• Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
• Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.