Jobs in Puyallup Washington

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing's Global Real Estate and Facilities (GREF) organization is seeking a Maintenance Plumber to join our team in Seattle, Auburn, Kent, Puyallup, Renton and Tukwila, Washington. You will be supporting building & ground maintenance and initial installations. Our team supports a 24/7 operation, based on business needs.

This role allows you to obtain a variety of skillsets, the opportunity to learn from knowledgeable colleagues, and to work on critical maintenance plumbing solutions for major Boeing sites. You will receive both on-the-job & formal training to enhance your technical skills, and backflow licensing is provided by the company. Incentives include additional pay for obtaining trade licenses paid by the company as well as receiving shift differential pay for second and third shift. This position is also eligible for overtime hours and pay.

Position Responsibilities:

• Perform routine diagnosing, testing, and repairing of all types of plumbing lines and fixtures

• Repair, construct, install, rebuild, adjust, and modify plumbing lines and fixtures

• Layout, construct, maintain, diagnose, repair, adjust, modify, rebuild and test plant facilities plumbing, such as air, gas, and water, and drain line, sprinkler systems; gasoline pumps and related systems; high and low pressure steam equipment; liquid, air and vacuum pumps and accessories; pneumatic controls; various regulating and other valves; oxygen, hydrogen and hydraulic systems; boiler and furnace burners, baffles, pilot lights, governors, floats, strainers and oil pumps

• Perform work described in other maintenance classifications when incidental but necessary to the accomplishment of the assignment

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 1+ years of experience in the plumbing or pipefitting trade

• Ability to perform work at heights up to 125 feet about ground level with appropriate safety gear and pass fall protection training

• Willingness to work any shift as required

Preferred Qualifications:

• 1+ years of experience working with any of the following: backflow prevention, chemical process tank lines, or high-pressure steam systems

• 1+ years of experience working in an industrial/manufacturing environment

• Possess related plumbing certification (e.g., backflow, fitter)                                                 

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. 

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We're looking for Pediatric Operating Room RNs for an immediate travel nurse opening in Tacoma, WA. The right RN will have at least 1-2 years of recent acute care experience. Read below for more requirements:

• Assist with moving and positioning of patient.
• Manage care of patient in the OR according to hospital policy.
• Ensure all patient paperwork is completed prior to procedure.
• Watch for signs and symptoms of impaired gas exchange related to anesthesia.
• Remain by the patient's side until anesthesia has been successfully induced.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Job Description

The Boeing Commercial Airplanes Liaison Engineering Organization is seeking Consultant (Level 5) Liaison Engineers to support operations in Everett, Seattle, Auburn, and or Renton Washington. We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering.

This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel.  The candidate will be the engineering representative on the factory floor transforming design into reality.

Position Responsibilities: 

• Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
• Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle.
• Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
• Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
• Develops and implements product/process improvements.
• Supports Integrated Product Teams (IPT) and participates in design reviews.
• Represents the engineering community from initial build through the production and post-production environment.
• Ensures supplier and build partner compliance with Boeing standards.
• Develops customer correspondence for continued safe operation and maintenance of equipment.
• Participates in on-site disabled product repair teams, accident investigation and support teams.
• Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
• Designs interim structural repairs and conducts static strength analysis.
• Develops non-destructive test procedures, tools and standards.

This position is fully onsite. The selected candidate will be required to work onsite at one of the listed locations. This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.

This position participates in the approximately 9-month Boeing Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime. The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis. Additionally, there may be travel involved between Boeing Puget Sound sites during the training rotation.

Basic Qualifications (Required Skills/Experience): 

• Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
• 14+ years of experience in structures, systems, design, or production engineering

Preferred Qualifications (Desired Skills/Experience): 

• Hands-on experience with materials and manufacturing processes.
• Prior BCA Engineering Material Review Board (MRB) Certification

Conflict of Interest:

 Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment 
process

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Shift:

This position is for multiple shifts and may require off shift, weekend, and travel assignments.

The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime. This requirement varies from site to site and is typically covered on a rotation basis.

Union:

This is a union represented position.

In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
 

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

• Summary pay range for Expert (level 5): $165,750 - $224,250

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Flexible Machining System (FMS) Operator you will have the opportunity to work with advanced CNC technology, ensuring precision and efficiency in the machining process. Your expertise will be essential in optimizing machine setups and operations, contributing to the production of high-quality components that meet stringent industry standards

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities

• Prepare for job setup by reviewing work orders, tie-in sheets, operator documents, blueprints, or CATIA plots for production orders, first lots, or tool tryouts.

• Review Work Orders (W/O) to confirm the correct type and quantity of materials and tools or fixtures are issued and free from visible defects, updating CMES as necessary.

• Identify the type of setup required based on documentation and check machine setups or parts completed by previous operators to assess job progress and ensure safe working conditions.

• Select and verify the condition of machine accessories and holding devices (e.g., chucks, vises, templates) and identify any required fixtures or shop aids.

• Attach air nozzles or suction devices for vacuum fixtures, securing them with bolts or clamps as specified in the operator setup documents.

• Use overhead cranes to load and unload parts and fixtures as required for the machining process.

• Upload and download CNC (Computer Numerical Controlled) programs to machine controllers using computing equipment from various servers or databases.

• Select and check cutting tools according to program specifications, ensuring they are the correct type, length, diameter, and in good condition before installation.

• Set machine coordinates or index points per CNC documents, including cutter offsets, tool heights, and probes, using appropriate measuring tools.

• Run CNC programs to machine rough and precision cut parts, monitoring machine operations for unusual vibrations, sounds, or warning indicators.

• Adjust machine settings (e.g., speeds and feeds) to correct machining issues or prepare the machine for subsequent operations, including head and spindle angles.

• Troubleshoot and repair minor controller problems as required, and initiate requests for corrective action when machine malfunctions occur.

• Perform Statistical Process Control (SPC) functions as required to ensure quality standards are met.

• Check completed work for defects and ensure parts meet drawing specifications, removing sharp edges with deburring tools as required.

• Maintain personal and tool certifications and assist planners or programmers in determining final numerical control programs to optimize machine utilization and minimize setups.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ years of experience setting up and operating Manual and CNC machines

• 2+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators

• 2+ years of experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications

•  2+ years of experience working with powered hand tools

• Experience with reading and interpreting drawings, specifications, material processes, schematic and diagrams

• Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift

Preferred Qualifications:

• Experience in Fabrication of airplane parts

• Experience in Fabrication of temporary tooling

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $33.32/hour, with the potential to earn up to $61.01 /hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Mar. 20, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Contingent Upon Program Reward

The position is contingent upon program award

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

• Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.

• Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

• Determine and/or develop methods where procedures may not be available.

• Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.

• Operate, use and maintain overhead maintenance work platforms

• Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.

• Inspect and maintain building runway rails and expansion joints.

• Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.

• Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.

• Maintain logs, charts, and perform written and verbal tie-in records.

• Prepare reports and schedules as required.

• Work with and assist employees of other classifications as required.

• Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

• 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.

• Able to lift up to 35 pounds.

Preferred Qualifications:

• Experience inspecting and maintaining building runway rails and expansion joints.

• Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Machine Repair Mechanic to join our Equipment Services team in various locations across Washington State.

As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount. You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment. Your commitment to safety will be reflected in your adherence to SHEA regulations and best practices while guiding and mentoring team members.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.
• Conduct preventative maintenance inspections on stationary generator sets and other equipment.
• Ensure compliance with SHEA regulations while performing all tasks.
• Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.
• Utilize schematics, blueprints, specifications, manuals, and applicable procedures to complete work assignments effectively.
• Develop assembly methods when procedures are not available, documenting these methods for future reference.
• Hand scrape, flake, lap, level, and align equipment components as needed.
• Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.
• Perform operational tests on machine tools and building equipment to ensure functionality.
• Maintain logs, charts, and records, preparing reports and schedules as required.
• Conduct preventive and predictive maintenance inspections to ensure equipment reliability.
• Collaborate with other crafts to accomplish tasks and assist as needed.
• Perform incidental rigging to facilitate work tasks.
• Carry out work in other classifications when necessary to complete assignments.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• 3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).
• Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.

Preferred Qualifications:

• Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.
• Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
• Ability to work around electromagnetic fields because of various types of production equipment.

Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $46.00/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 03, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Want to make extra money on YOUR schedule? Join our exclusive list of research study participants and start earning extra income today!

Perfect for anyone seeking remote, part-time, or temporary work, these opportunities require no previous experience and offer unmatched flexibility. Choose the studies that suit you best—whether online, in-person, or over the phone—and get paid for sharing your opinions.

Don't miss out on this chance to turn your free time into valuable earnings!

Participants are needed on a wide range of topics such as:

• Health Issues (Research for cures and new medications to treat ailments)
• Consumer Products (Your experience with consumer products)
• Shopping (Shopping experiences)
• Internet Usage (How you use the internet)
• Vehicles (recreational vehicles and automobiles)
• Employment (Various types of jobs or career fields)
• Food & Beverages (the consumption of various foods and beverages)
• Entertainment (About TV, movies or video games)
• Social Media (the use of different social media platforms)
• Financial (Banking and investing)
• Retirement (Planning what, when and how)
• Gender (studies based on your gender)
• Housing (Renters or Homeowners)

Compensation:

• Earn up to $250+ in Just ONE Hour! (Focus Group Session)
• Earn up to $3,000+ (Multi-Session Studies)

Benefits:

• Flexibility to take part in discussions online or in-person.
• No commute needed if you choose to work from home.
• No minimum hours. You can do this part-time or full-time
• Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products.
• You get to review and use new products or services before they are launched to the public.

Qualifications:

• Speak and/or read English
• Must be 18yrs old or older
• Must have either a phone, computer or tablet with internet connection

Experience:

• Start Immediately - No Experience Needed! Anyone Can Participate!

Education:

• Open to all education levels - Your opinion matters!