Engineering Jobs in Pine Castle Florida Remote
59 positions found — Page 2
For corporate maintenance, this position is responsible for performing advanced preventative maintenance, installations, and repairs for corporate and regional facilities operations assigned.
This includes the maintenance of central plant distribution systems and mechanical equipment and facilitating the distribution of villa appliances and furnishings stored at the corporate facilities warehouse.
This role provides excellent service to both external and internal customers while adhering to all brand and OSHA compliance standards.
Expected Contributions Maintenance Performs advanced preventive maintenance, installation, troubleshooting, and repair of building systems and equipment, including HVAC, mechanical, low-voltage electrical systems, structured cabling (e.g., CAT6 punch-down to junction boxes), plumbing, refrigeration, commercial kitchen equipment, appliances, controls, and energy management systems.
Diagnoses system issues, calibrates controls and gauges, and completes repairs using appropriate tools, equipment, and technical documentation.
Installs, maintains, and reconfigures systems furniture, case goods, appliances, and equipment across multiple sites; performs general furniture maintenance, relocation, and setup as needed.
Supports central plant and warehouse operations by maintaining equipment, tracking, labeling, and identifying inventory, and recommending replacement of defective or outdated assets.
Responds to service requests, prioritizes assigned work, and completes tasks independently while coordinating with Facilities Leadership to meet established quality standards.
Identifies, locates, and operates equipment shut‑off valves and systems to support safe and effective maintenance activities.
Maintains accurate maintenance records, logs, and documentation, including work performed, readings, and equipment status.
Serves as an experienced technical resource by sharing knowledge and best practices with peers as needed; does not carry supervisory responsibility.
Maintains tools, equipment, and maintenance inventory, including requisitioning.
Mailroom Provides operational support as requested.
Operates Pitney Bowes to receive and distribute incoming mail and packages as needed.
Processes outgoing mail (USPS, FedEx) as needed.
Housekeeping Regularly conducts visual inspections of assigned properties.
Escalates any required actions to vendor management or facilities management team as appropriate.
Assists with housekeeping-related issues as requested.
Safety & Security Reports work related accidents, or other injuries immediately upon occurrence to manager/supervisor.
Follows policies and procedures for the safe operation and storage of tools, equipment, and machines.
Identifies and corrects unsafe work procedures or conditions and/or reports them to management and security/safety personnel.
Follows property specific procedures for handling emergency situations (e.g., evacuations, medical emergencies, natural disasters).
Uses proper equipment, wears appropriate personal protective clothing (PPE), and employs correct lifting procedures, as necessary, to avoid injury.
Follows company and department safety and security policies and procedures to ensure a clean, safe, and secure environment.
Follows Hazardous Material Management Program procedures for handling and disposing of chemicals, fertilizer, pesticides, blood borne pathogens, etc., including using Material Safety Data Sheets (MSDS).
Completes appropriate safety training and certifications to perform work tasks.
Maintains awareness of undesirable persons on property premises.
All work performed in compliance with company policies, safety requirements, and applicable OSHA standards Quality Assurance/Quality Improvement Complies with quality assurance expectations and standards.
Identifies opportunities for processes improvements within assigned work areas.
Monitors work quality and standards to ensure expectations are met for assigned tasks.
Maintain Records or Logs Maintains daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
Emergency Response Assists local authorities with emergency and natural disaster situations (e.g., flood, blackout, fire alarm) according to disaster response protocol.
Candidate Profile Education High school diploma or GED required.
Technical, Trade, or Vocational School Degree preferred.
Qualifications in Plumbing, HVAC, Mechanical, Electrical preferred Experience 1-2 years of related work experience Demonstrated senior-level technical experience required.
Working knowledge of HVAC equipment preferred.
Working knowledge of plumbing and electrical systems.
Experience maintaining power and water consumption records.
Experience driving forklift preferred.
Physical & Environmental Requirements The physical demands and work environment characteristics described below are representative of those an associate must be able to perform successfully, with or without reasonable accommodation, to perform the essential functions of this job.
Frequently stand, walk, bend, stoop, kneel, crouch, twist, and reach to inspect, install, repair, and maintain building systems and equipment.
Ascend and descend ladders and stairs to access mechanical rooms, ceilings, rooftops, and elevated equipment.
Ability to lift, carry, push, and pull materials, tools, and equipment, typically up to 50 pounds, with or without assistance.
May frequently or constantly exert up to 20 pounds of force, frequently exert up to 50 pounds of force, and occasionally exert up to 100 pounds of force using team lifts or mechanical aids as needed.
Perform tasks requiring manual dexterity, hand‑eye coordination, and the ability to operate hand tools, power tools, and diagnostic equipment.
Maintain visual acuity sufficient to read gauges, meters, control panels, blueprints, and digital screens.
Must be able to travel between sites and operate a company vehicle as needed.
The work environment for this position may include: Indoor and outdoor settings across corporate offices, warehouses, mechanical rooms, rooftops, and other facility areas.
Exposure to electrical systems, loud noise levels, vibration, confined spaces, dust, fumes, odors, and varying temperatures, including heat and cold.
Use of electricity, pressurized systems, chemicals, and cleaning agents in accordance with safety procedures and training.
Occasional work in emergency or time‑sensitive situations, which may require extended periods of standing, walking, or physical activity.
Must be able to safely perform work in compliance with all safety policies, including Lockout/Tagout procedures, hazardous materials handling, and emergency response protocols.
Must be able to follow established procedures for the safe operation and storage of tools, equipment, and machinery.
Skills and Attributes Ability to troubleshoot and resolve maintenance issues using sound judgment.
Hands-on experience performing general maintenance and repair work.
Ability to read and follow technical instructions, diagrams, and blueprints.
Experience using hand tools, power tools, maintenance equipment, and PPE.
Strong safety awareness and dependable work habits.
Ability to communicate clearly and complete work orders, logs, and reports.
Customer-focused mindset with the ability to work well on a team.
Strong organizational skills with the ability to manage multiple tasks.
Valid driver’s license with a clean driving record.
May require flexible scheduling, including evenings/weekends, emergency response, and overtime as business needs dictate.
Works independently while collaborating with leadership to meet quality standards.
Demonstrates professionalism and teamwork.
Takes ownership of work and contributes improvement ideas.
Marriott Vacations Worldwide is an equal opportunity employer committed to hiring a diverse workforce and sustaining an inclusive culture.
Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints.
Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem.
Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems.
Coordinates subsystem and/or system testing activities with programs and other organizations.
Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance.
Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems.
Required Experience: -Candidate must have at least 3 years of experience with electrical and mechanical drawings and schematics.
-Candidate must have at least 3 years of experience with basic shop tools, multimeters, oscilloscopes, and other diagnostic tools.
-Candidate must have at least 3 years of experience with Troubleshooting electrical and mechanical systems.
-Candidate must have at least 3 years of experience Authoring test plans, procedures, and reports.
-Candidate must have at least 3 years of experience Developing, presenting, and discussing presentation material technical in nature.
-Candidate must have at least 3 years of experience with Environmental testing.
-Candidate must have at least 3 years of experience with Setting of test instrumentation, collecting test data, and analyzing test data -Candidate must have at least 3 years of experience with Coordinating test plans with leadership, customers, and range personnel -Candidate must have at least 3 years of experience with Presenting test plans to multiple stakeholders -Candidate must have at least 3 years of experience with Planning, leading, conducting complex tests with multiple test objectives Candidate must be able to travel to support work at off-site test locations Candidate must be able to perform work in a lab and an outdoor environment Candidate must be a self starter and able to work independently Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
Role: Integration and Test Engineer
Location: Clearwater FL/Orlando, FL 32825 - Onsite
Duration: 9-12 Months contract (Possible extension)
Pay Rate: $60-80.00/hr W2
Shift hour: 4/10-1st shift/2nd Shift. Onsite
Plans, implements, tests, documents, and maintains solutions for the integration and testing of subsystems and/or systems.
Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints.
Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem.
Reviews, evaluates and derives requirements for testability, develops test programs and procedures for complete systems and/or subsystems.
Coordinates subsystem and/or system testing activities with programs and other organizations.
Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance.
Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems.
Must have minimum 4-6 years in similar role
Responsible for developing test programs to run on the Lockheed Martin LM-STAR, LM-CORE, and eCASS systems.
Variety in work assignments is what you can expect from this position as we support RF, analog, digital, Electronic Warfare, Electro-Optics, and a variety of communication technologies.
Team members work collectively as well as individually to develop software and hardware designs to support customer missions.
Daily work involves leading a team of Test Program Set (TPS) developers and collaborating with Hardware, Software, and Systems Engineering to coordinate efforts required to produce a tailored work product for our customers.
The successful candidate will have project and technical leadership experience, proven hardware/software integration skills, a working knowledge of standard electronics lab equipment, and good communication skills.
Candidates must be able to lead development of test programs written in either PAWS ATLAS or NI TestStand and LabWindows CVI.
Date Posted:
2026-01-28Country:
United States of AmericaLocation:
US-AZ-TUCSON-M09 ~ 3350 E Hemisphere Loop ~ BLDG M09Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Agile Hardware Solutions (AHS) strives to develop, mature, and deploy advanced product development capabilities across the Hardware Engineering discipline, enabling the business to deliver high quality work products at competitive discriminating velocity & cost.
The Agile Hardware Solutions (AHS) Department is seeking a Mechanical Dimensional Management Engineer, located in Tucson, AZ (Onsite)
Occasional domestic travel may be expected.
The Mechanical Dimensional Management (DM) Engineer is part of the Producibility Team within Agile Hardware Solutions. The DM Engineer collaborates directly with Mechanical Engineering, Materials & Processes and Design & Drafting from the Mechanical Products Team along with Operations, Quality and Supply Chain peers, and suppliers to implement mechanical producibility improvements on new and emerging programs, and upgrades to existing programs.
The team executes tolerance optimization through primarily 3D tolerance and variation analysis and works with the design team to influence the final design. Early engagement in the conceptual stage and throughout the development process will ensure that our designs are optimized with respect to tolerance controls and methods of manufacture. The DM engineer plays an essential part in reducing product cost and ensuring functional quality.
What You Will Do
As a member of the Dimensional Management and Producibility Team, you may support the team in the following ways:
Perform detailed 3D complex dimensional tolerance analyses and review 1D tolerance analyses using various tools to evaluate design requirements of new and existing designs to calculate design margin / capability, and provide recommendations while adhering to cost, schedule, and manufacturing constraints.
Work with product teams to develop coordinated datum flow and document via drawings including interface control drawings (ICDs).
Apply, encode and decode Geometric Dimensioning and Tolerancing (GD&T) on various technical data packages.
Contribute to the development and training of the practical application of GD&T, tolerance analysis methods, and tools.
Where applicable become recognized as the Dimensional Management Lead on a program to coordinate various aspects of the Dimensional Management Closed Loop Process while supporting Critical Item Initiatives.
Function as a self-starter while exercising considerable latitude in determining the strategic objectives and methods of achieving Dimensional Management goals.
Where empowered within a program, offer assistance developing inspection plans for both internal inspection and as required by suppliers for compliance with specifications.
Qualifications You Must Have
Bachelors in Science, Technology, Engineering, or Mathematics (STEM), and 8 years’ professional engineering experience
Experience in the application of GD&T principles (ASME Y14.5)
Experience with CAD modeling (CREO preferred)
Experience with commercial tolerance analysis tools (Siemens visVSA preferred)
Qualifications We Prefer
Demonstrated working knowledge of statistical tolerancing methods (e.g., Monte Carlo simulations, RSS, MRSS, etc.)
Working knowledge of fabrication processes, producibility enhancements, and inspection and validation methods
Working knowledge of inspection planning, inspection methods and dimensional data analysis
ASME Certified GD&T Professional (GDTP per ASME Y14.5.2) or equivalent5 ASME standard (e.g.Y14.5) committee membership or similar involvement
Expertise in various Inspection and Validation methods and tools, including gages & Coordinate Measuring Machines (CMMs)
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation Eligible
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA, an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-03-05Country:
United States of AmericaLocation:
US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site)Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
What You Will Do
If you’re self-motivated and thrive working with multi-disciplined teams who are committed to innovation and pushing the boundaries of technology, then this might be the perfect job.
As a Raytheon Process Engineer, you’ll work to improve processes to maintain efficiency, reduce costs, improve sustainability and safety and maximize profitability.
You’re the in-factory materials and process specialist, and your responsibilities will include verifying that Technical Data Package (TDP) shelf-life materials are correctly called out in Manufacturing Data Packages (MDPs) and writing material processing procedures. In addition, you’ll collaborate on integrating process equipment within the factory and you’ll document the equipment’s functionality.
As a Process Engineer II, your responsibilities will also include:
- Quickly addressing production issues related to materials and processes, ensuring root causes of issues are understood and solutions are robust and cost effective
- Assisting with on-the-job training for materials and processes
- Actively participating in daily production meetings
- Collaborating with Factory personnel
- Notifying the Materials Management Team of any potential materials obsolescence or supply chain interruptions
- Assisting the Process Engineer working with Materials & Process Engineering (M&PE) to quickly address problem buys and obsolete materials. This includes identifying end users, determining material requirements, finding alternatives (drive testing as needed), ensuring new materials will work in existing processes and using the opportunity to drive to common materials
- Helping to improve processes utilizing Lean manufacturing techniques to reduce variability, eliminate constraints and provide ongoing process sustainment
- Helping to drive use of common materials based on allowable requirements on the drawing, utilizing process engineering tools
- Assisting in creating or editing Manufacturing Procedures
- Supporting process troubleshooting efforts to quickly and efficiently resolve manufacturing process issues and coordinating with Materials & Process Engineering (M&PE) Labs to do root Cause Corrective Action as required
- This position involves direct support of manufacturing activities and requires spending time in and around factory areas
This is a 1st Shift Job.
This job is posted as ONSITE, and is based at Raytheon’s Tucson, AZ facility.
Qualifications You Must Have
- Typically Requires a Bachelor's Degree in Science, Technology, Engineering or Math (STEM) and minimum 2 years of relevant experience.
- Experience with manufacturing processes
- Experience with project execution
Qualifications We Prefer
- Bachelor’s or Master’s Degree in Chemical Engineering, Material Science, Manufacturing Engineering or Mechanical Engineering preferred
- Experience with materials and material testing
- Experience with lean manufacturing
- Experience with technical writing
- Skilled problem solver and team player
- Excellent interpersonal and communication skills
- A hands-on and self-motivated learner with the ability to work independently and in a group environment
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Learn More & Apply Now!
- Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
- This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Security Clearance FAQs - United States Department of State
- This position is an onsite role – Tucson, AZ: ,-az-location
- We Are RTX
We Are RTX - YouTube
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Flexible Machining System (FMS) Operator to join our Fabrication team in Auburn & Puyallup WA.
As a Flexible Machining System (FMS) Operator you will have the opportunity to work with advanced CNC technology, ensuring precision and efficiency in the machining process.
Your expertise will be essential in optimizing machine setups and operations, contributing to the production of high-quality components that meet stringent industry standards You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities Prepare for job setup by reviewing work orders, tie-in sheets, operator documents, blueprints, or CATIA plots for production orders, first lots, or tool tryouts.
Review Work Orders (W/O) to confirm the correct type and quantity of materials and tools or fixtures are issued and free from visible defects, updating CMES as necessary.
Identify the type of setup required based on documentation and check machine setups or parts completed by previous operators to assess job progress and ensure safe working conditions.
Select and verify the condition of machine accessories and holding devices (e.g., chucks, vises, templates) and identify any required fixtures or shop aids.
Attach air nozzles or suction devices for vacuum fixtures, securing them with bolts or clamps as specified in the operator setup documents.
Use overhead cranes to load and unload parts and fixtures as required for the machining process.
Upload and download CNC (Computer Numerical Controlled) programs to machine controllers using computing equipment from various servers or databases.
Select and check cutting tools according to program specifications, ensuring they are the correct type, length, diameter, and in good condition before installation.
Set machine coordinates or index points per CNC documents, including cutter offsets, tool heights, and probes, using appropriate measuring tools.
Run CNC programs to machine rough and precision cut parts, monitoring machine operations for unusual vibrations, sounds, or warning indicators.
Adjust machine settings (e.g., speeds and feeds) to correct machining issues or prepare the machine for subsequent operations, including head and spindle angles.
Troubleshoot and repair minor controller problems as required, and initiate requests for corrective action when machine malfunctions occur.
Perform Statistical Process Control (SPC) functions as required to ensure quality standards are met.
Check completed work for defects and ensure parts meet drawing specifications, removing sharp edges with deburring tools as required.
Maintain personal and tool certifications and assist planners or programmers in determining final numerical control programs to optimize machine utilization and minimize setups.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications 2 years of experience setting up and operating Manual and CNC machines 2 years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators 2 years of experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications 2 years of experience working with powered hand tools Experience with reading and interpreting drawings, specifications, material processes, schematic and diagrams Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift Preferred Qualifications: Experience in Fabrication of airplane parts Experience in Fabrication of temporary tooling Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $33.32/hour, with the potential to earn up to $61.01 /hour in accordance with the terms of the relevant collective bargaining agreement Applications for this position will be accepted until Mar.
20, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Contingent Upon Program Reward The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
BCforward is currently seeking Test Scorer in EST and CST zones.
Position Title: Test Evaluator (Remote EST/CST)
Location: Remote (Only EST & CST)
Anticipated Start Date: ASAP
Duration: 2 months
Job Type: Contract
Shift: Monday-Friday 8:30am-4:00pm
Note: Must have bachelor's degree from accredited university and must have own equipment (Computer/laptop) with Good Internet Connectivity to WFH.
Pay Rate: $18.00/hr. on W2.
Note: Must successfully pass an initial assessment
Position Overview:
The Test Scoring/Reader position involves hand-scoring tests that contain constructed responses, such as essays, math problems requiring shown work, or written answers. These responses must be scored by a live person because they cannot be evaluated mechanically.
Tests may be completed online. For online tests, scorers log into the system to review and score responses.
Scoring is based on criteria established by each State Department of Education. You will be trained in these standards and scoring methods. The first one to two days of each project are dedicated to training. At the end of training, you must pass a qualifying test to demonstrate your ability to score accurately.
Test Scorers/Readers work in a classroom-style environment led by a Scoring Director who conducts training and overseas operations.
You must be able to work the full schedule each week, as exceptions cannot be made for other commitments. The company offers a casual work environment and pleasant atmosphere.
Job Requirements:
· Bachelor's degree from an accredited university (diploma or official transcripts required)
· Ability to work the entire duration of the project
· Comfortable working at a desk and on a computer all day
· No absences permitted during the first week for any reason
Computer Requirements:
· Laptop or desktop computer
· High-speed internet
· Google Chrome
· Audio, video, and microphone capabilities
· Quiet workspace
Remote working/work at home options are available for this role.
