Engineering Jobs in Pembroke Pines Florida

$67K-$75K, plus a take-home company car

Lunch, Gas, Cell Phone, Car Wash Allowance

Generous Time-Off

Bonus and lots more!

Job Title: HR Trainer (for a major automotive logo)

Position Summary

The HR Trainer is responsible for designing, delivering, and continuously improving training programs that support employee development, operational excellence, and compliance within an automotive environment. This role partners closely with HR, Operations, Safety, and Leadership to ensure employees are equipped with the skills, knowledge, and behaviors needed to perform effectively and safely in a fast-paced, production-driven setting.

Key Responsibilities

Training Design & Delivery

• Develop and facilitate onboarding, orientation, and ongoing training programs for hourly and salaried employees
• Deliver instructor-led, virtual, and hands-on training sessions tailored to automotive manufacturing and operations
• Adapt training materials to support different learning styles and workforce levels

Compliance & Policy Training

• Conduct training on HR policies, code of conduct, workplace safety, harassment prevention, and labor law compliance
• Ensure training aligns with company policies, OSHA standards, and applicable federal, state, and local regulations
• Maintain accurate training records and certifications

Operational & Technical Training Support

• Partner with Operations and Safety teams to support production, quality, and safety training initiatives
• Assist in rolling out new processes, systems, or operational changes through effective training programs
• Support continuous improvement initiatives and standardized work practices

Performance & Development

• Assess training needs through job analysis, performance data, and leadership feedback
• Measure training effectiveness using assessments, surveys, and performance metrics
• Recommend improvements to training content and delivery methods

Collaboration & Communication

• Work closely with HR, supervisors, and leadership to ensure consistent messaging and training execution
• Serve as a trusted resource for employees regarding training and development opportunities

Qualifications

Required

• 2–5 years of experience in training, HR, or learning & development
• Experience delivering training in a manufacturing, automotive, or industrial environment
• Strong presentation, facilitation, and communication skills
• Ability to engage both hourly and salaried employees
• Proficiency with Microsoft Office and basic learning management systems (LMS)

Preferred

• Bachelor’s degree in Human Resources, Education, Business, or related field
• Experience with automotive manufacturing processes or plant operations
• Knowledge of OSHA, labor laws, and HR compliance training
• Bilingual (English/Spanish) a plus
• Train-the-Trainer or instructional design certification

Working Conditions

• On-site role within an automotive manufacturing or operations facility
• Frequent interaction with production floor employees and leadership
• Occasional schedule flexibility to support shift-based training

The ideal candidate will be responsible for planning, coordinating, and implementing projects within the decided-upon budget, timeline, and scope. They will also effectively monitor and present project updates to relevant stakeholders, clients, or project team members. 

• Set project timeline
• Monitor project deliverables
• Update relevant stakeholders or team members on the project progress
• Coach and support project team members with tasks you assign them

Qualifications

• Bachelor's Degree or equivalent experience
• Strong business acumen in project planning and management
• Strong verbal, written, and organizational skills

The Broward County Board of County Commissioners is seeking qualified candidates for Engineering Unit Supervisor (Highway Construction and Engineering Division).

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.



This position supports professionals responsible for managing capital and mobility advancement projects for Broward County's Highway Construction and Engineering Division. The ideal candidate will have experience coordinating with multiple entities, including municipalities, state agencies, and local authorities. Work involves the review, planning, and coordination of the design and construction of County capital and mobility advancement projects, including schedules, budgets, and staff assignments.

General Description
Performs advanced professional and supervisory engineering work in the design and review of a wide variety of engineering and environmental projects.
Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.
Minimum Education and Experience RequirementsRequires a Bachelor's degree from an accredited college or university with major coursework in civil engineering.

Requires six (6) years progressively responsible experience in professional engineering work related to roadway design and construction or closely related field, including two (2) years of supervisory experience.
Special Certifications and LicensesPossess and maintain Professional Engineer License in State of Florida for duration of assignment.

Preferences* Master's Degree in Civil Engineering, Public Administration or closely related field* Certified in the use of one (1) or more of the following engineering programs (i.e. ICPR, ASAD, HY-8, HEC-RAS, HEC-HMS, Synchro, HCS, IMSA), or similar
* Construction Training Qualification Program (CTQP) Certifications (Asphalt, Concrete, Earthwork, QC Manager, etc.)
* Professional Traffic Operations Engineer, Professional Surveyor & Mapper, General Contractor License, or similar
* Project Management Professional and/or Certified Public Manager
* Advanced Work Zone Traffic Control Training Certification
* At least ten (10) years of experience in design and construction of roadway/traffic projects
* At least five (5) years of experience in one (1) of the following specialized fields of engineering: Traffic Operations, Structures, Drainage, Geotechnical, Construction Management
* At least three (3) years of experience with MicroStation OpenRoads Designer (ORD)
* At least two (2) years of experience in governmental contract and procurement
* At least two (2) years of experience in the preparation of agenda items and/or resolutions

SCOPE OF WORK

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Schedules, assigns, and supervises engineering design projects; directs and coordinates field surveys, plan design, preparation and review, cost estimate development, and specifications preparation; participates in the development and design and review of major and complex projects.

Supervises and participates in the analysis and review of engineering studies and designs prepared by professional consultants; prepares recommendations for the consideration of professional and administrative superiors and committees.

Supervises the preparation of right-of-way and construction plans for major thoroughfares; conducts studies and prepares reports on proposed locations for future major thoroughfares; maintains liaison with appropriate outside agencies concerning projects under consideration for construction.

Supervises and participates in the activities of construction engineers, inspectors, and materials technicians in the investigation and construction of water and sewer mains, roadways, structures, and related public work projects; prepares general and special specifications for contract construction; supervises the maintenance and analysis of payment estimates and records.

Oversees and performs the technical review of remedial action plans; oversees and administers environmental licensing programs.

Conducts special engineering studies and projects relating to technical and administrative aspects of the public works function; coordinates the utilization of computer technology as related to the engineering function.

Conducts long-range studies involving other departments, agencies, and organizations; prepares reports and recommendations; seals and signs engineering plans, drawings, and documents.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs sedentary work that involves walking or standing some of the time and involves exerting up to 10 pounds of force on a regular and recurring basis or sustained keyboard operations.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

Competencies

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Directs Work

• Plans and Aligns

• Optimizes Work Processes

• Ensures Accountability

• Builds Effective Teams

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.

Description

The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.

Job Duties:

Specific duties will include:

SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.

Requirements Analysis/Review for test-ability

Test procedure development, implementation, execution and failure root cause analysis.

Test planning and preparation.

Assess System performance against requirements

Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.

Develop and refine system and board level test cases and procedures.

Trouble shoot subsystem and system level failures to root cause.

Design test fixtures & cables to enable testing.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).

Trouble shoot subsystem and system level failures to root cause.

Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.

Interpret test requirements and electrical test results.

Read electrical schematics.

Test planning, preparation & execution

Required Qualifications:

3 to 5 years of experience

Strong interpersonal skills

Strong analytical skills

B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired

Will consider equivalent years of relevant experience in lieu of a formal degree

Experience working with or developing Automated Test Equipment (ATE).

Experience in hardware and test equipment troubleshooting experience.

Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand

Can operate independently

Desired Skills:

Excellent verbal and written communication skills.

Experience working independently and in a collaborative environment

Ability to react to project adjustments and alterations promptly and efficiently

Ability to effectively prioritize and execute tasks in a high-pressure environment

Familiarity with electronic components and common electronic test equipment.

Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads

Ability to interpret test requirements and electrical test results.

Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.

Experience with GIT, Tortoise SVN, or equivalent software configuration management tools

Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.

Previous experience with programming languages such as C, C++ & C#.

Previous experience with Visual Studio.

Compensation:

This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.

Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

We are seeking a skilled Chemical Engineer to design, analyze, and optimize pharmaceutical manufacturing processes. The role involves leading process improvement and development projects, resolving complex technical and operational challenges, and ensuring compliance with Good Manufacturing Practices (GMP), quality standards, and regulatory requirements. The ideal candidate will have strong technical expertise, project management experience, and a continuous improvement mindset.

Shift / Working Hours

• Hours: 8:00 AM – 5:00 PM Mon- Fri

Key Responsibilities

• Analyze, design, and optimize pharmaceutical manufacturing processes (e.g., formulation, mixing, granulation, coating, sterilization)
• Lead process improvement and development projects from concept through implementation
• Apply structured problem-solving methodologies (Root Cause Analysis, 5 Whys, Fishbone, FMEA) to address deviations and operational issues
• Drive process improvement initiatives focused on yield, efficiency, robustness, and scalability
• Collaborate with Production, Quality, Validation, Engineering, Maintenance, and R&D teams
• Ensure all process changes comply with GMP, regulatory requirements, and quality standards
• Develop, review, and maintain process documentation, SOPs, batch records, and technical reports
• Support process validation, revalidation, and technology transfer activities
• Analyze process data and KPIs to drive continuous improvement and risk reduction
• Lead or support CAPA investigations related to process deviations, non-conformances, and OOS results
• Participate in internal and external audits (FDA, EMA, local authorities)
• Train manufacturing and technical personnel on process changes and best practices

Required & Preferred Qualifications

Education

• Bachelor's degree in Chemical Engineering
• 5–10 years of experience in chemical engineering, process improvement, or pharmaceutical manufacturing
• Proven experience in process development and project execution
• Strong technical problem-solving and root cause analysis skills
• Experience supporting validation and regulatory inspections preferred

Technical Knowledge

• Pharmaceutical manufacturing processes and unit operations
• GMP / cGMP, FDA, EMA regulations
• Process validation, scale-up, and technology transfer
• Risk management tools (FMEA, HACCP)
• Statistical analysis and process capability (Cp, Cpk)
• Process data analysis tools and advanced Excel

Apply now

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.