Jobs in Opal Virginia

• 
  
• You will pass on instructions to members of the work group.
  
• You will check and report work progress of the group.
  
• You will perform work site inspections.
  
• You will receive job or work assignments from welding supervisor.
  
• You will check and report work progress of the group including written documentation and shift assist requests.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• Ensure work is done safely and meets quality standards.
• Must have own basic skill related tools and equipment if not supplied by the workplace.
• Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames.
• Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools.
• Locate and mark reference lines, such as center, buttock, and frame lines.
• Position parts in hull of ship.
• Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.
• Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding.
• Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips.
• May prepare molds and templates for fabrication of nonstandard parts.
• May tack weld clips and brackets in place prior to permanent welding.
• May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines.
• Ensure work is done safely and meets quality standards.
• Assemble items as instructed by floor supervisor.
• Keep work areas clean and organized and take proper care of all equipment and facilities.
• Follow all company rules and policies.
• Provide a great level of attention to detail and focus on the given task.
• Work with team members to maximize productivity and efficiency.
• Prepare product for shipment.
• Report any unsafe work conditions or practice to supervisor.
• Lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds), or using a hoist.
  

• None
  

• Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals.
• Familiarity with the metric system
• Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents.
• Ability to stand continuously for long periods of time.
• Ability to identify and measure material.
• Ability to follow instructions given both verbally and in written form.
• Willingness to learn and work to the best of his/her abilities as well as dependable work ethic.
• Knowledge of machines and tools, including their designs and uses.
• Ability to read blueprints, drawings, calipers, tape measures and angle gauges.
  

• High school graduate, or GED preferred.
• Six months to one-year related experience and/or training
• Experience with steel, aluminum and/or stainless steel required.
  

• Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime.
• Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions.
• Work over extended periods of time in tightly configured confined spaces.
• Often works on scaffolds and ladders. To avoid injury, safety clothing is required along with safety devices to protect the eyes, head, or hearing.
  

• Measuring tapes, rulers, squares, levels, chalk lines, saws, shears, plasma cutters, oxy-fuel torches, angle grinders, welding machines, welding torches, electrodes, welding masks, cranes, hoists, chains, slings, come-alongs, hammers, screwdrivers, wrenches, pliers, vise grips, clamps, files, deburring tools, drills, grinders, sanders, impact wrenches, reciprocating saws, air hammers (pneumatic), riveters (pneumatic), forklifts, pallet jacks, trolleys, and other tools. Items listed are a representative sample but not an all-inclusive list.
  

• May be made to enable qualified individuals with disabilities to perform essential job functions.
  

• 
  
• Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.
  
• Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.
  
• Fabricate and install fixtures and jigs required for welding process alignments.
  
• Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.
  
• Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.
  
• Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.
  
• Leads technical project teams, schedules, reports and briefs customers and senior management.
  
• Performs duties outside of specialty in order to complete installation or work assignment.
  
• Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.
  
• Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.
  

• 
  
• Must possess a high school, trade or vocational school degree
  
• 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment
  
• Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred
  
• Must have or have the ability to obtain a SECRET clearance
  
• Must have the ability to obtain base access and security credentials
  
• Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs
  
• Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces
  
• Travel may be required within and outside of the continental United States
  
• Due to export control regulations, this role is open to U.S. citizens of the US
  
• Demonstrated reliability and punctuality; must be able to consistently report to work on time
  
• Possess basic and some advanced specialized welder's tools
  

• 
  
• Program, set up, and operate CNC press brake and laser equipment
  
• Proficiently interpret drawings and work packages while maintaining attention to detail and understanding precision tolerances.
  
• Operate manual machines such as lathes, mills, drills and machinist hand tools.
  
• Measure precision parts using calibrated instruments.
  
• Fabricate new parts or repair existing ones as needed in manufacturing processes
  
• Troubleshoot minor programming and mechanical issues as needed
  
• Understand and operate conversational milling machines and Acu-Rite digital readouts.
  
• Work with various materials to produce high-quality products that meet drawing specifications.
  
• Review samples, drawings, or instructions to understand output specifications.
  
• Plan the sequence of necessary actions to complete a job.
  

• 
  
• High School Diploma or equivalent
  
• Minimum 6 years of experience in CNC Press brake/laser operation in a manufacturing setting
  
• Basic understanding of precision sheet metal, encompassing flat layouts, bend deductions, and related machine tooling
  
• Skilled in fabricating, fitting, and assembling precision parts per drawings
  

• 
  
• Proficient in installing threaded inserts and various hardware components into parts
  
• Excellent attention to detail.
  

OLH Technical Services, LLC, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking a Program Manager - Aviation Supply Support.

Position Responsibilities:

• Communicates with the customer to provide status and accept communication, guidance, or direction. Works with the customer on a daily basis as required, to ensure currency for specific areas of responsibility and provides a simplified weekly update. Provides analysis, process recommendations, and performs management support.
• Performs problem solving via coordination for forward deployed TARP Reps, eRMS monitoring/activity assignment management, including deployments, task order/cost proposal management, subcontract management, training plan management, SITSUM preparation, Marine Corps Command liaison including special reporting, operations management meeting agenda/facilitation.
• Participates in TARP Field Team Brief Presentations, VTCs/phone calls as requested/needed.
• Provides support for Mobile Node Operations (set up, operations, ATAC coordination, compliance with local country laws, and reporting), travel controls and management, warehouse lease management plus related packaging and container supplies management and overseas personnel contact management.

Position Requirements:

• SECRET Clearance
• Minimum of Bachelor's degree.
• 15 years' of related work experience that must include program manager duties in supply systems and/or logistics programs.
• Must be able to manage a program with approximately 60 personnel in a fluid operational environment.

VEVRAA Federal Contractor

Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international.

We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

• 
  
• You will be identifying and associating metals, alloys and filler metal by color code and standard markings.
  
• You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests.
  
• You will be using test methods for determining metals or alloys.
  
• You will be inspecting completed welding projects.
  
• You will be using various welding machines and welding processes to weld piping parts or structures.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions and examining functionality.
• Responsible for audits, surveillances and inspections while also working closely with our QA department to ensure integration.
• Reviewing blueprints and specifications to compare to produced goods.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Training the production team on quality control measures to improve product excellence.
• Proposing improvements to the production process.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Updating job knowledge by engaging in educational opportunities and regular training.
• Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs.
• Reading and interpreting engineering drawings and radiographs.
• Using gauges such as calipers and micrometers to measure products.
• Collecting and compiling statistical quality data.
• Assisting in the development of test methods and inspection plans.
• Determining the causes of product defects and reworks.
• Verifying all equipment is calibrated correctly.
• Additional duties as necessary.
  

• Must have at least 5 years' experience in the Quality Assurance/Control field and technical or vocational training.
• Must have a strong understanding of Government Specs.
• Must have extensive knowledge of AWS D1.1 (Structural Steel), D1.2 (Aluminum), D1.5 (Bridge Code), and D1.6 (Stainless Steel).
• Must have knowledge of NAVSEA Standards, QA. & OSHA Standards 29 CFR 1920 (Occupational Safety and Health Standards) & 1915 (Personal Protective Equipment for Shipyard Employment).
• Must have ABS code construction experience.
• Knowledge of NAVSEA Standard Items and Quality Assurance requirements
• Must have a valid Driver's license and a clean DMV record.
• Must have expert knowledge of NAVSEA 009 Standard Items.
  

• Minimal Travel; 10% or less.
  

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
  

• 
  
• Working with Task Leaders, program/project managers, and SMEs, the welder will assist with:
  
• the Shipboard installation and integration of complex audio visual display
  
• various communication and electronic warfare systems
  
• related ancillary and computer based systems onboard naval ships and command centers worldwide.
  
• Other Duties as assigned.
  

• We expect this employee to have experience in and be familiar with work being performed in or around industrial environments such as shipyards and Naval/Coast Guard bases and piers. As well as various and subcontractor Government sites.

• 
  
• Must be a U.S. citizen.
  
• Must have or be able to obtain a Secret clearance.
  
• Must have High School diploma.
  
• Must be willing to travel up to 75% CONUS/OCONUS.
  
• Must be willing to work extended hours including weekends and holidays.
  
• Must have a valid driver's license and reliable transportation.
  
• Must have experience in welding steel and aluminum.
  
• Must have experience welding in a shipyard environment.
  
• Must have the ability to lay out and perform structural modifications and install foundations based on reading SIDs and ICDs
  
• Must be willing to perform other installation tasks in addition to welding. Such as cable installation, priming, lagging, painting, on load and offload of equipment and materials.
  
• Must be able to successfully pass a pre-employment background check and pre-hire drug test.
  

• 
  
• Experience brazing copper nickel pipe and Oxy Fuel torch operation.
  
• CPR and first aid training experience.
  
• Confined space training.
  
• Climber safety training.
  

• 
  
• This is a full-time position in support of the Chugach integration and installation tasking team lead. The work may be performed at (Location TBD), industrial areas to include; shipyard, Navy/Coast Guard bases, shipboard and shore site locations.
  
• Work is performed inside industrial environments and subject to working around exposures to hazards that may cause bodily harm, cuts, bruises, burns, etc.
  
• Work may also be performed outside even during in climate weather.
  
• Work may be performed at heights (aloft) where fall protection is required.
  
• Work may be performed welding and cutting of metal.
  
• Work may be performed off a ladder.
  

• 
  
• Ability to lift 45 lbs., climb vertical ladders, operate and work around heavy machinery.
  
• Work at heights (aloft).
  
• Operate power tools safely.
  
• Carry equipment and machinery around ships.
  
• Ability to stand and walk most of the shift.
  
• Kneel and crawl at work site.
  
• Crouch through void openings.
  
• Safely evacuate ship during an emergency.
  

At Jared, we know that jewelry is more than a ring or pendant no matter how sparkling and brilliant. Which is why we empower every one of our jewelry consultants with the innovation, training and resources to help our customers Celebrate Life and Express Love in new and engaging ways. Jared is part of Signet Jewelers, a purpose-driven company who believes love inspires love. Signet is also \"Great Place to Work-Certified\". There are brilliant career paths awaiting you rewarding opportunities to impact the lives of others and inspire love. Join us!

Jared Jewelers is now hiring seasonal, part-time, and full-time team members!

Do you thrive on building personal relationships that will last a lifetime? Join our team today to help our customers celebrate life and express love!

Your role at Jared Jewelers:

As a part of our Sales Team you are responsible for providing a superior experience to our valued customers. In addition, you will:

Engage customers in conversation to understand their needs and desires

Ability to present merchandise and share detailed information regarding features and benefits of products

Provide information regarding extended service plans and financing options

Meet individual and team sales goals

We think you'd be great for this role if you have:

A desire to help our customers celebrate the special moments in their lives

Strong customer service, sales, retail and/or jewelry experience

Flexible availability to work during \"peak\" retail hours such as nights, weekends, and holidays

A positive, customer -focused approach in delivering an exceptional customer experience

Strong communication and relational skills

We put our People First by offering the following benefits:

Base pay plus commission on sales

Medical, dental, vision and prescription insurance (full-time team members)

401(k)

Paid Time Off (full-time and part-time team members)

Paid holidays (full-time team members)

Tuition reimbursement, including DCA courses based on position

Training Associate Training System, Management Training System, District Manager in Training, career development and more

Merchandise discounts

Incentive trips and contests

Jared Jewelers is part of the Signet Jewelers family and is an equal opportunity employer committed to promoting inclusion and diversity for all employees. We value integrity, teamwork and offer opportunities for advancement as part of our promote from within philosophy.

Please know that while we appreciate every applicant's interest in joining our team, we can only contact those selected for further consideration.

Contracting CDL-A Truck Drivers

TOP PAY STARTS HERE - Solo drivers net up to $138,000/year; teams earn $240,000+
SIMPLE TERMS. SOLID SUPPORT. - No down payment, no credit check, walkaway lease; set $0.99/gal fuel price
TURN AMBITION INTO OWNERSHIP - Lease completion incentives, including custom colors and add-ons for your truck

Why Drive for Hirschbach?

Hirschbach is contracting CDL A truck drivers in your local area. We are not your typical trucking company. We are driver-focused, driver-first and we mean it. Driving for Hirschbach isn't just another job - it's THE job. We offer drivers industry-leading 24/7 support and our ultra-modern truck fleet comes with the latest features and technology.

So if you have at least 6 months CDL-A truck driving experience, apply today to learn about options. You've tried the rest, now run with the best.

OTR Truck Driver Job Overview

• 
  
• Run solo or as an existing team. It's your route, your revenue, and your truck. The next step of your career growth starts here.
  
• Thru 4/1, new OTR hires eligible for $10,000 sign-on/stay bonus.* Bonus applies to OTR Solos/Teams, Company or Lease and Regional roles.
  
• Earn more, faster. Get $800 driver orientation qualification process pay & performance incentives up to $0.30/mi, and add accessorial pay to your base CPM.
  
• Bring home up to $138,000 per year as a solo 1099 driver. Base CPM ranges from $1.12-$2.85, depending on length of haul.
  
• Team up and increase earnings. Pre-existing teams only. Refer a teammate and earn $1,200. Net average $210,000 - $248,000 per truck per year; all expenses are split.
  
• Run 99% no-touch freight. Our routes are built to keep you moving, so you spend less time loading and more time rolling.
  

Lease Purchase Details

• 
  
• Flexible, friendly terms: No down payment, no credit check, walkaway lease.
  
• Fixed, discounted fuel rate: Hirschbach drivers pay $0.99/gallon for fuel, regardless of price at pump.
  
• Full-service maintenance plan: Covers all mechanical parts for $0.10/mi. No out-of-pocket expenses!
  
• Affordable truck payments: average payments between $800-$900 per week
  
• Trick My Truck: After 1 year, spec your truck your way with custom colors and add-ons.
  

Run in Style & Comfort

• 
  
• 2023-2026 fully-specced Internationals and Freightliner Cascadias
  
• Includes inverter & carrier APUs
  
• Large capacity refrigerator
  
• 24\" SmartTV
  
• Free SiriusXM satellite radio
  
• Heated & cooled seats
  
• Lane assist sensors
  

Minimum Hiring Requirements

• 
  
• Valid Class A CDL
  
• At least 23 years of age
  
• 6+ months verifiable CDL-A experience
  

*Pay varies by route, location, experience level, and performance.
**There is no deadline to apply. Applications are accepted on an ongoing basis.

Job Type: Full-time

Work Location: On the road

Reference Number: 112