Jobs in Murphy, TX
545 positions found — Page 9
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Provides input for colleague’s performance appraisals
· Assists Test Engineers when commissioning new test equipment.
· Provides technical assistance to other technicians on the same shift.
· Provides line support to manufacturing for all test processes.
· Ensures “machine down” calls are responded to in a timely manner.
· Liaises with manufacturing to determine repair priorities.
· Ensures adequate spares are available for all allocated equipment.
· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
· Escalates to Test Engineers any unresolved/ongoing issues.
· Instructs operators on safe/effective use of test equipment.
· Provides daily report of all line issues.
· Provides weekly/quarterly downtime reports for allocated equipment.
· Sources spares from the most cost effective supplier.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Why USAA?
At USAA, our mission is to empower our members to achieve financial security through highly competitive products, exceptional service and trusted advice. We seek to be the #1 choice for the military community and their families.
Embrace a fulfilling career at USAA, where our core values – honesty, integrity, loyalty and service – define how we treat each other and our members. Be part of what truly makes us special and impactful.
The Opportunity
The Associate Life Solutions Specialist helps to ensure the financial security of our membership by assessing member life insurance needs, providing advice and / or referrals for advice, and making the appropriate recommendations based on members' individual needs and goals. May provide support to Health Solutions acquisition and retention based on member demand.
We offer a flexible work environment that requires an individual to be in the office 5 days per week, with the opportunity to move to a hybrid schedule after 6 months. This position will be based at the Plano, TX Campus . Relocation assistance is not available for this position.
What you'll do:
- Receives request for advice from current and prospective members through various channels, including inbound and outbound phone calls, emails, faxes and video telephony. Special Acquisitions Team employees will primarily place outbound calls triggered from underwriting work items. Life Regulatory team employees respond to specific regulatory/business needs as directed by policies and procedures.
- Asks questions to discover key information, including life events, and to understand member needs. Documents relevant information. Life Regulatory team employees ask specific questions, often scripted, as needed to complete regulatory requirements and document relevant information.
- Assesses member financial situation and goals. Life Regulatory will refer members to Life Sales representative for advice and recommendations.
- Develops and communicates appropriate life insurance strategies based on individual member needs. Provides basic protection advice and strategies. Life Regulatory will refer members to Life Sales representative for advice and recommendations.
- Recommends relevant life insurance product and solutions and refers members who may need financial advice to the respective department. Life Regulatory will refer members to Life Sales representative for advice and recommendations.
- Motivates member to take action on recommendation(s) and resolves objections using basic sales techniques and developing persuasion skills. Implements recommendation(s).
- Monitors legislative initiatives that may impact economy, society, and personal financial situation.
- Educates membership on implications of economic, industry trends, and tax law changes, as well as USAA's products and services.
- May conduct outbound follow-up calls to complete member acquisition of products and services previously discussed.
Work Hours:
- Monday – Friday / 7:30am – 8:00pm (Central)
- An 8 hour shift will fall within these hours
- This role is required to be in office, with potential hybrid opportunity after 6 months.
What you have:
- High School diploma or GED
- Required maintenance of Life/Health license and/or acquisition within 90 days
- Required annual completion of AHIP and Broker/Carrier appointments when applicable.
- Up to 1 year of financial industry and/or life sales experience
- Experience delivering frequent written and oral communication
- Experience acquiring and applying new concepts and information
- Experience processing and analyzing information
- Experience fulfilling requests and meeting deadlines
- Experience resolving conflict and negotiating
- Experience multi-tasking in an operating systems environment
- Experience participating in a team environment
- Successful completion of a job-related assessment may be required
What sets you apart:
- Active Group 1 Life and Health license
- 1+ yrs experience working in Sales with life insurance or financial services products
- 1+ yrs experience working in a call center environment
- CLU - Chartered Life Underwriter or comparable designation
- US military experience through military service or a military spouse/domestic partner
Compensation range: The salary range for this position is: $48,290 - $81,490.
Compensation: USAA has an effective process for assessing market data and establishing ranges to ensure we remain competitive. You are paid within the salary range based on your experience and market data of the position. The actual salary for this role may vary by location.
Employees may be eligible for pay incentives based on overall corporate and individual performance and at the discretion of the USAA Board of Directors.
The above description reflects the details considered necessary to describe the principal functions of the job and should not be construed as a detailed description of all the work requirements that may be performed in the job.
Benefits: At USAA our employees enjoy best-in-class benefits to support their physical, financial, and emotional wellness. These benefits include comprehensive medical, dental and vision plans, 401(k), pension, life insurance, parental benefits, adoption assistance, paid time off program with paid holidays plus 16 paid volunteer hours, and various wellness programs. Additionally, our career path planning and continuing education assists employees with their professional goals.
For more details on our outstanding benefits, visit our benefits page on
Applications for this position are accepted on an ongoing basis, this posting will remain open until the position is filled. Thus, interested candidates are encouraged to apply the same day they view this posting.
USAA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Manage all planning activities for the dedicated assigned workcell and mentor the Production Planners and Document Coordinators in the workcell.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Ensure 100% on-time delivery.
- Establish build readiness.
- Maintain efficiency of capacity and customer sizing.
- Maintain accurate revenue forecasting.
- Maintain material control and liability.
- Develop Master Production Schedule (MPS) and load into Jabil’s ERP system, including Purchase Order (PO) coverage.
- Reconcile the MPS to customer PO coverage weekly to ensure that Jabil is not exposed over and above customer PO coverage or other authorized customer demand.
- Ensure the MPS is always 100% accurate and achievable.
- Achieve and maintain 95% MPS goal.
- Own production planning, BOM and document control with or without additional support.
- Analyze material and capacity requirements and communicate constraints to the Workcell and customer based on accurate customer demand.
- Maintain the workcell’s capacity planning model; drive resolution on uneven capacity utilization that keeps Jabil focused on the customer but efficiently utilizing manufacturing resources.
- Meet daily with the Workcell and manufacturing team to assess production schedules, (adjust as necessary based on production results) optimize run quantities, and minimize changeovers to help achieve 100% on time delivery.
- Maintain the customers’ latest contract on file at all times and be familiar with the terms and conditions of the contract regarding customer liability of material planning and production scheduling. This includes the liability window for Jabil material purchase order placement, purchase price for components, and liability for any in-house materials (purchased and manufactured).
- Be the workcell’s “expert” on all planning activities by supporting the Production Planner goal of never starting to build product without having a valid PO, adequate material quantities, and accurate BOM and an accurate routing.
- Lead the Workcell on the creation of Bills of Material (BOMs) and routings that allows accurate tracking of WIP assemblies and accurate inventory movement transactions.
- End-of Life (EOL) management should include chairing a meeting 30 days prior to the last planned build date to create tactics to support the EOL strategy. The Master Planner would own the build schedule, corrections and resolution of MPS to customer demand, planned tactics on deadlines for assemblies out of the various work areas on the floor, deadline for last shipment, and support plan for potential RMAs.
- Manage Jabil purge process for internal Workcell purges.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
EDUCATION & EXPERIENCE REQUIREMENTS
- Bachelor’s degree + 5 years of experience, or Masters + 3 years of related experience, or PhD without experience.
- APICS certification and Supervisor experience also preferred.
- Thorough knowledge of MRP, lead times for specific component types, internal run rates, test development lead times, machine programming lead times and complete understanding of the chronological sequence of events that must occur in order to build a product.
- Or an equivalent combination of education, training, or experience.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Provides input for colleague’s performance appraisals
· Assists Test Engineers when commissioning new test equipment.
· Provides technical assistance to other technicians on the same shift.
· Provides line support to manufacturing for all test processes.
· Ensures “machine down” calls are responded to in a timely manner.
· Liaises with manufacturing to determine repair priorities.
· Ensures adequate spares are available for all allocated equipment.
· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
· Escalates to Test Engineers any unresolved/ongoing issues.
· Instructs operators on safe/effective use of test equipment.
· Provides daily report of all line issues.
· Provides weekly/quarterly downtime reports for allocated equipment.
· Sources spares from the most cost effective supplier.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.
What You’ll Do
- Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.
- Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).
- Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.
- Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.
- Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.
- Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.
- Partner cross‑functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.
What You Bring
- Bachelor’s degree in engineering or related field, plus 5-8 years’ related experience and 2-3 years in a management role required, or equivalent combination of education and experience.
- Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.
- Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.
- Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.
- Analytical, data‑driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.
- Effective communicator and collaborator with a hands‑on leadership style.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The SMT Engineering Tech will be responsible for supporting the surface mount technology (SMT) production lines, ensuring efficient operation, high-quality output, and continuous improvement through troubleshooting, maintenance, and process optimization.
Job Responsibilities
- Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
- Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
- Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
- Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
- Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
- Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
- Maintain accurate records of equipment maintenance, process parameters, and production issues.
- Adhere to all safety protocols and quality standards within the SMT department.
Job Qualifications
- Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
- Minimum of 2-4 years of experience working with SMT production lines and equipment.
- Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
- Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
- Ability to read and interpret technical drawings, schematics, and process specifications.
- Excellent problem-solving skills and a methodical approach to troubleshooting.
- Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
- Ability to work independently and as part of a team in a fast-paced manufacturing environment.
- Familiarity with IPC standards (e.g., IPC-A-610) is a plus.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Want to make extra money on YOUR schedule? Join our exclusive list of research study participants and start earning extra income today!
Perfect for anyone seeking remote, part-time, or temporary work, these opportunities require no previous experience and offer unmatched flexibility. Choose the studies that suit you best—whether online, in-person, or over the phone—and get paid for sharing your opinions.
Don't miss out on this chance to turn your free time into valuable earnings!
Participants are needed on a wide range of topics such as:
- Health Issues (Research for cures and new medications to treat ailments)
- Consumer Products (Your experience with consumer products)
- Shopping (Shopping experiences)
- Internet Usage (How you use the internet)
- Vehicles (recreational vehicles and automobiles)
- Employment (Various types of jobs or career fields)
- Food & Beverages (the consumption of various foods and beverages)
- Entertainment (About TV, movies or video games)
- Social Media (the use of different social media platforms)
- Financial (Banking and investing)
- Retirement (Planning what, when and how)
- Gender (studies based on your gender)
- Housing (Renters or Homeowners)
Compensation:
- Earn up to $250+ in Just ONE Hour! (Focus Group Session)
- Earn up to $3,000+ (Multi-Session Studies)
Benefits:
- Flexibility to take part in discussions online or in-person.
- No commute needed if you choose to work from home.
- No minimum hours. You can do this part-time or full-time
- Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products.
- You get to review and use new products or services before they are launched to the public.
Qualifications:
- Speak and/or read English
- Must be 18yrs old or older
- Must have either a phone, computer or tablet with internet connection
Experience:
- Start Immediately - No Experience Needed! Anyone Can Participate!
Education:
- Open to all education levels - Your opinion matters!
Remote working/work at home options are available for this role.
Why USAA?
At USAA, our mission is to empower our members to achieve financial security through highly competitive products, exceptional service and trusted advice. We seek to be the #1 choice for the military community and their families.
Embrace a fulfilling career at USAA, where our core values – honesty, integrity, loyalty and service – define how we treat each other and our members. Be part of what truly makes us special and impactful.
The Opportunity
The Mid-Level Life Solutions Specialist helps to ensure the financial security of our membership by assessing member life insurance needs, providing advice and / or referrals for advice, and making the appropriate recommendations based on members’ individual needs and goals. May provide support to Health Solutions acquisition and retention based on member demand.
We offer a flexible work environment that requires an individual to be in the office 5 days per week, with the opportunity to move to a hybrid schedule after 6 months. This position can be based at the Plano, TX Campus . Relocation assistance is not available for this position.
What you'll do:
Receives request for advice from current and prospective members through various channels, including inbound and outbound phone calls, emails, faxes, and video telephony. Special Acquisitions Team employees will primarily place outbound calls triggered from underwriting work items.
Asks questions to discover key information, including life events, and to understand member needs. Documents relevant information.
Uncovers and recognizes life events, understands and assesses the member's needs, financial situation, and goals.
Develops and understands appropriate life insurance strategies based on individual member needs. Provides intermediate protection planning advice, including insurance protection, estate planning and enhanced solutions like long term care products.
Recommends relevant life insurance product and solutions and refers members who may need financial advice to the respective department.
Motivates member to take action on recommendation(s) and resolves objections using intermediate sales techniques and intermediate persuasion skills. Implements recommendation(s).
Monitors legislative initiatives that may impact economy, society, and personal financial situation.
Educates membership on implications of economic, industry trends and tax law changes, as well as USAA's
products and services.
May conduct outbound follow-up calls to complete member acquisition of products and services previously discussed.
Serves as a resource to less experienced team members on escalated issues of a routine nature.
Guides and influences less experienced team members.
Work Hours:
Monday – Friday / 7:30am – 7:00pm (Central)
An 8 hour shift will fall within these hours
This role is required to be in office, with potential hybrid opportunity after 6 months.
What you have:
High School diploma or GED
Required maintenance of Life/Health license
Required annual completion of AHIP and Broker/Carrier appointments when applicable.
2 years of financial industry and/or life sales experience
Experience delivering frequent written and oral communication
Experience acquiring and applying new concepts and information
Experience processing and analyzing information
Experience fulfilling requests and meeting deadlines
Experience resolving conflict and negotiating
Experience multi-tasking in an operating systems environment
Experience participating in or leading teams
Successful completion of a job-related assessment may be required
What sets you apart:
4+ years experience working in Sales with life insurance
1+ years experience working in a call center environment
CLU® - Chartered Life Underwriter or comparable designation
US military experience through military service or a military spouse/domestic partner
Compensation range: The salary range for this position is: $66,340 - $111,940
Compensation: USAA has an effective process for assessing market data and establishing ranges to ensure we remain competitive. You are paid within the salary range based on your experience and market data of the position. The actual salary for this role may vary by location.
Employees may be eligible for pay incentives based on overall corporate and individual performance and at the discretion of the USAA Board of Directors.
The above description reflects the details considered necessary to describe the principal functions of the job and should not be construed as a detailed description of all the work requirements that may be performed in the job.
Benefits: At USAA our employees enjoy best-in-class benefits to support their physical, financial, and emotional wellness. These benefits include comprehensive medical, dental and vision plans, 401(k), pension, life insurance, parental benefits, adoption assistance, paid time off program with paid holidays plus 16 paid volunteer hours, and various wellness programs. Additionally, our career path planning and continuing education assists employees with their professional goals.
For more details on our outstanding benefits, visit our benefits page on
Applications for this position are accepted on an ongoing basis, this posting will remain open until the position is filled. Thus, interested candidates are encouraged to apply the same day they view this posting.
USAA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Why USAA?
At USAA, our mission is to empower our members to achieve financial security through highly competitive products, exceptional service and trusted advice. We seek to be the #1 choice for the military community and their families.
Embrace a fulfilling career at USAA, where our core values – honesty, integrity, loyalty and service – define how we treat each other and our members. Be part of what truly makes us special and impactful.
The Opportunity
As a Mid-level Retirement Income Specialist, you will ensure the financial security of our membership by assessing member's current retirement income needs, providing advice, and making the appropriate recommendations based on member needs.
We offer a flexible work environment that requires an individual to be in the office 5 days per week, with the opportunity to move to a hybrid schedule after 6 months. This position can be based in the following location: Plano, TX. Relocation assistance is not available for this position.
For new hires starting, we are offering a signing bonus of $2,500. Bonus will be paid in one lump sum (minus applicable taxes) after 45 days of employment.
What you'll do:
Receives request for advice from current and prospective members through various channels, including inbound and outbound phone calls.
Asks questions to discover key information and retirement events and understands the role of annuities in a retirement income plans, as well as executive and retirement benefits for federal and military employees.
Documents relevant information as it relates to building a retirement income portfolio.
Uncovers and recognizes retirement events, understands and assesses the member's needs, financial situation, and goals and evaluates the factors to consider when determining an appropriate retirement age.
Develops and communicates appropriate retirement income strategies based on individual member needs.
Provides advanced retirement planning advice, tax-efficient distribution options, health expense budgets, insurance solutions, estate planning and enhanced solutions like long term care products.
Recommends relevant financial product and services and refers for solutions that they are not trained and/or licensed to recommend or fulfill.
Motivates member to take action on recommendation(s) and overcomes objections using advanced sales techniques and persuasion skills. Implements recommendation(s).
Familiar with the latest retirement strategy research and monitors legislative initiatives that may impact economy, society, and personal financial situation.
Educates membership on implications of economic, industry trends, tax law changes, estate issues, retirement risks, and other threats to an effective retirement income plan, as well as USAA's financial products and services.
Integrate risk management tools, products, and strategies to create an effective retirement income plan.
Expected to conduct outbound calls to follow up on products and services previously discussed and to actively engage in outbound call campaigns. Serves as a resource to less experienced team members on escalated issues of a routine nature.
Guides and influences less experienced team members.
Ensures risks associated with business activities are effectively identified, measured, monitored, and controlled in accordance with risk and compliance policies and procedures.
What you have:
High School Diploma or General Equivalency Diploma required.
Active Group 1 Life & Health license and required maintenance or ability to acquire within 90 days of hire.
Required maintenance of FINRA Series 7 license.
Required maintenance of FINRA Series 66 (or 63 and 65) license.
Must be able to successfully pass background check and meet all USAA and regulatory requirements. Additionally, applicant must have the ability to be licensed and registered in all required states and jurisdictions.
4 years of financial industry and/or sales experience.
Experience delivering frequent written and oral communication.
Experience processing and analyzing information.
Experience fulfilling requests and meeting deadlines.
Experience resolving conflict and negotiating.
Experience multi-tasking in an operating systems environment.
Experience participating in or leading teams.
Successful completion of a job-related assessment may be required
What sets you apart:
US military experience through military service or a military spouse/domestic partner.
3+ years of direct Annuity Sales Experience
Experience working in an Inbound/Outbound Call Center
Retirement Income Certified Professional Designation (RICP)
Compensation range: The salary range for this position is: $74,240.00 - $133,620.00.
Compensation: USAA has an effective process for assessing market data and establishing ranges to ensure we remain competitive. You are paid within the salary range based on your experience and market data of the position. The actual salary for this role may vary by location.
Employees may be eligible for pay incentives based on overall corporate and individual performance and at the discretion of the USAA Board of Directors.
The above description reflects the details considered necessary to describe the principal functions of the job and should not be construed as a detailed description of all the work requirements that may be performed in the job.
Benefits: At USAA our employees enjoy best-in-class benefits to support their physical, financial, and emotional wellness. These benefits include comprehensive medical, dental and vision plans, 401(k), pension, life insurance, parental benefits, adoption assistance, paid time off program with paid holidays plus 16 paid volunteer hours, and various wellness programs. Additionally, our career path planning and continuing education assists employees with their professional goals.
For more details on our outstanding benefits, visit our benefits page on
Applications for this position are accepted on an ongoing basis, this posting will remain open until the position is filled. Thus, interested candidates are encouraged to apply the same day they view this posting.
USAA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Why USAA?
At USAA, our mission is to empower our members to achieve financial security through highly competitive products, exceptional service and trusted advice. We seek to be the #1 choice for the military community and their families.
Embrace a fulfilling career at USAA, where our core values – honesty, integrity, loyalty and service – define how we treat each other and our members. Be part of what truly makes us special and impactful.
The Opportunity
Job Description
As an Intermediate Retirement Income Specialist you will ensure the financial security of our membership by assessing member's current retirement income needs, providing advice, and making the appropriate recommendations based on member needs.
We offer a flexible work environment that requires an individual to be in the office 5 days per week. After a successful 6 months, the option for a hybrid schedule will be available. This position can be based in the following location: Plano, TX. Relocation assistance is not available for this position.
For new hires starting, we are offering a signing bonus of $2,500. Bonus will be paid in one lump sum (minus applicable taxes) after 45 days of employment.
What you'll do:
Receives request for advice from current and prospective members through various channels, including inbound and outbound phone calls.
Asks questions to discover key information and retirement events and understands the role of annuities in a retirement income plan. Documents relevant information as it relates to building a retirement income portfolio.
Uncovers and recognizes retirement events, understands and assesses the member's needs, financial situation, and goals and evaluates the factors to consider when determining an appropriate retirement age.
Develops and communicates appropriate retirement income strategies based on individual member needs. Provides retirement advice and strategies and understand the steps in creating an effective retirement income plan.
Recommends relevant financial product and services and refers for solutions that they are not trained and/or licensed to recommend or fulfill.
Motivates member to take action on recommendation(s) and overcomes objections using intermediate sales techniques and persuasion skills. Implements recommendation(s).
Familiar with the latest retirement strategy research and monitors legislative initiatives that may impact economy, society, and personal financial situation.
Educates membership on implications of economic, industry trends, tax law changes, estate issues, retirement risks, and other threats to an effective retirement income plan, as well as USAA's financial products and services.
Integrate risk management tools, products, and strategies to create an effective retirement income plan.
May be expected to conduct outbound calls to follow up on products and services previously discussed and to actively engage in outbound call campaigns as needed.
Collaborates with team members to resolve issues and to identify appropriate issues for escalation.
Ensures risks associated with business activities are effectively identified, measured, monitored, and controlled in accordance with risk and compliance policies and procedures.
What you have:
High School Diploma or General Equivalency Diploma required.
Active Group 1 Life & Health license and required maintenance or ability to acquire within 90 days of hire.
Required maintenance of FINRA Series 7 license.
Required maintenance of FINRA Series 66 (or 63 and 65) license.
Must be able to successfully pass background check and meet all USAA and regulatory requirements. Additionally, applicant must have the ability to be licensed and registered in all required states and jurisdictions.
1 year of financial industry and/or sales experience.
Experience delivering frequent written and oral communication.
Experience processing and analyzing information.
Experience fulfilling requests and meeting deadlines.
Experience resolving conflict and negotiating.
Experience multi-tasking in an operating systems environment
Successful completion of a job-related assessment may be required
What sets you apart:
2+ years of direct Annuity Sales Experience
Experience Working in an Inbound/Outbound Call Center
Retirement Income Certified Professional Designation (RICP)
US military experience through military service or a military spouse/domestic partner
Compensation range: The salary range for this position is: $67,520.00 - $121,530.00.
Compensation: USAA has an effective process for assessing market data and establishing ranges to ensure we remain competitive. You are paid within the salary range based on your experience and market data of the position. The actual salary for this role may vary by location.
Employees may be eligible for pay incentives based on overall corporate and individual performance and at the discretion of the USAA Board of Directors.
The above description reflects the details considered necessary to describe the principal functions of the job and should not be construed as a detailed description of all the work requirements that may be performed in the job.
Benefits: At USAA our employees enjoy best-in-class benefits to support their physical, financial, and emotional wellness. These benefits include comprehensive medical, dental and vision plans, 401(k), pension, life insurance, parental benefits, adoption assistance, paid time off program with paid holidays plus 16 paid volunteer hours, and various wellness programs. Additionally, our career path planning and continuing education assists employees with their professional goals.
For more details on our outstanding benefits, visit our benefits page on
Applications for this position are accepted on an ongoing basis, this posting will remain open until the position is filled. Thus, interested candidates are encouraged to apply the same day they view this posting.
USAA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Job Summary
The SMT Process Engineer IV is a senior-level technical expert responsible for optimizing and maintaining surface mount technology (SMT) processes to ensure high-quality, efficient, and cost-effective electronic assembly. This role involves advanced troubleshooting, process development, and continuous improvement initiatives across multiple SMT lines, often acting as a lead or mentor within the engineering team. Job ResponsibilitiesLead the development, implementation, and optimization of complex SMT processes, including stencil printing, pick-and-place FUJI, reflow soldering, and automated optical inspection (AOI).
Conduct advanced root cause analysis and implement corrective actions for SMT process defects (e.g., shorts, opens, voids, component placement issues) using statistical process control (SPC) and other analytical tools.
Design and execute experiments (DOE) to improve SMT process robustness, yield, and throughput, focusing on new product introduction (NPI) and existing product enhancements.
Collaborate with design engineering, manufacturing, and quality teams to ensure manufacturability (DFM) and resolve complex technical issues related to SMT assembly.
Develop and maintain comprehensive process documentation, work instructions, and training materials for SMT operators and technicians.
Evaluate and recommend new SMT equipment, materials, and technologies to enhance capabilities and improve manufacturing efficiency.
Provide technical mentorship and guidance to junior engineers and manufacturing personnel on SMT best practices and problem-solving techniques.
Drive continuous improvement projects using Lean manufacturing and Six Sigma methodologies to reduce waste and increase productivity within SMT operations.
Monitor key performance indicators (KPIs) for SMT processes and present findings and recommendations to management.
Ensure compliance with all relevant industry standards, safety regulations, and quality management systems (e.g., ISO, IPC).
Job Qualifications
Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
8+ years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
Expert-level knowledge of SMT equipment (e.g., printers, pick-and-place machines, reflow ovens, AOI/SPI) from various manufacturers (e.g., Fuji, Universal, Koh Young, Agilent).
Deep understanding of IPC-A-610 and J-STD-001 standards.
Proficiency in statistical process control (SPC), design of experiments (DOE), and advanced problem-solving methodologies (e.g., 8D, Six Sigma).
Strong analytical skills with the ability to interpret complex data and make data-driven decisions.
Demonstrated ability to lead technical projects and drive process improvements.
Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and mentor others.
Experience with CAD/CAM software for SMT programming and DFM analysis is a plus.
Ability to work effectively in a fast-paced, dynamic manufacturing environment.
The SMT Engineering Tech will be responsible for supporting the surface mount technology (SMT) production lines, ensuring efficient operation, high-quality output, and continuous improvement through troubleshooting, maintenance, and process optimization.
Job Responsibilities
Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
Maintain accurate records of equipment maintenance, process parameters, and production issues.
Adhere to all safety protocols and quality standards within the SMT department.
Job Qualifications
Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
Minimum of 2-4 years of experience working with SMT production lines and equipment.
Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
Ability to read and interpret technical drawings, schematics, and process specifications.
Excellent problem-solving skills and a methodical approach to troubleshooting.
Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
Ability to work independently and as part of a team in a fast-paced manufacturing environment.
Familiarity with IPC standards (e.g., IPC-A-610) is a plus.
Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.
~ Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).
~ Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.
~ Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.
~ Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.
~ Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.
~ Partner cross ‑ functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.
Bachelor’s degree in engineering or related field, plus 5-8 years’ related experience and 2-3 years in a management role required , or equivalent combination of education and experience.
~ Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.
~ Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.
~ Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.
~ Analytical, data ‑ driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.
~
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Manage all planning activities for the dedicated assigned workcell and mentor the Production Planners and Document Coordinators in the workcell.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Ensure 100% on-time delivery.
Establish build readiness.
Maintain efficiency of capacity and customer sizing.
Maintain accurate revenue forecasting.
Maintain material control and liability.
Develop Master Production Schedule (MPS) and load into Jabil’s ERP system, including Purchase Order (PO) coverage.
Reconcile the MPS to customer PO coverage weekly to ensure that Jabil is not exposed over and above customer PO coverage or other authorized customer demand.
Ensure the MPS is always 100% accurate and achievable.
Achieve and maintain 95% MPS goal.
Own production planning, BOM and document control with or without additional support.
Analyze material and capacity requirements and communicate constraints to the Workcell and customer based on accurate customer demand.
Maintain the workcell’s capacity planning model; drive resolution on uneven capacity utilization that keeps Jabil focused on the customer but efficiently utilizing manufacturing resources.
Meet daily with the Workcell and manufacturing team to assess production schedules, (adjust as necessary based on production results) optimize run quantities, and minimize changeovers to help achieve 100% on time delivery.
Maintain the customers’ latest contract on file at all times and be familiar with the terms and conditions of the contract regarding customer liability of material planning and production scheduling. This includes the liability window for Jabil material purchase order placement, purchase price for components, and liability for any in-house materials (purchased and manufactured).
Be the workcell’s “expert” on all planning activities by supporting the Production Planner goal of never starting to build product without having a valid PO, adequate material quantities, and accurate BOM and an accurate routing.
Lead the Workcell on the creation of Bills of Material (BOMs) and routings that allows accurate tracking of WIP assemblies and accurate inventory movement transactions.
End-of Life (EOL) management should include chairing a meeting 30 days prior to the last planned build date to create tactics to support the EOL strategy. The Master Planner would own the build schedule, corrections and resolution of MPS to customer demand, planned tactics on deadlines for assemblies out of the various work areas on the floor, deadline for last shipment, and support plan for potential RMAs.
Manage Jabil purge process for internal Workcell purges.
Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
Comply and follow all procedures within the company security policy.
EDUCATION & EXPERIENCE REQUIREMENTS
Bachelor’s degree + 5 years of experience, or Masters + 3 years of related experience, or PhD without experience.
APICS certification and Supervisor experience also preferred.
Thorough knowledge of MRP, lead times for specific component types, internal run rates, test development lead times, machine programming lead times and complete understanding of the chronological sequence of events that must occur in order to build a product.
Or an equivalent combination of education, training, or experience.
