Jobs in Kensington, CT

Border Patrol Agent (BPA) Entry Level

NEW RECRUITMENT AND RETENTION INCENTIVES!

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.

Salary and Benefits

Annual Base Salary for newly appointed BPAs varies per grade, as follows:

GL-5/GL-7 $49,739 - $89,518 per year

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
• Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

• Make sound judgments and decisions in the use of firearms.
• Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
• Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

In an assigned cell, perform a variety of inspection processes, using various tools and equipment, following standardized methods and established techniques, to verify production process integrity up through and which may include preparation and presentation of parts to customer for Final Inspection or sale. Assist in 1st Article presentations or Production Lot Test initiatives. Accept or reject material based on findings.

TYPICAL DUTIES:

• 
  
• Work from applicable written inspection procedures, drawings, and other pertinent instructions to plan and perform dimensional and visual inspection on parts, tools, gages, and other equipment, accepting material or referring for rework or quality review based on findings.
  
• Use a variety of fixed and variable measuring instruments including computerized machines where program instructions are well defined to check dimensions and recording results. Perform necessary mathematical computations to determine extent of non-conformance and complete appropriate paperwork.
  
• Follow established procedures to perform in-line checks and verification of dimensions and make sure that operation sheets are being followed.
  
• Recognize need and arrange for repair or replacement of equipment used in performing work as necessary.
  
• Support initiatives as directed to reduce MRB and re-work requirements, and assist in the manufacture of quality parts.
  
• Assist on various internal program audits.
  
• May assist others at their direction in the investigation of unusual non-conformances, new or changed inspection sequences, and other specialized assignments within the scope and skill level of this job function.
  
• Support Lean Manufacturing/Continuous Improvement initiatives and function as requested.
  
• Recommend, and participate in environmental health and safety practices.
  
• Refer difficulties to higher-level Inspectors, Lead Person, and /or Supervisor.
  
• Perform routine servicing throughout assigned area following specified procedures, and written instructions, such as operators' checklist, for upkeep and to assure equipment operates properly.
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individual skills.
  
• May be required to train for, obtain, and maintain licenses, operator permits, and certifications within assigned area or cell.
  

This position is currently accepting applications.

Apply Now

FUNCTION:

In an assigned area or cell, work with limited supervision to perform the assembly of Production aircraft parts as well as the teardown, and assembly of Overhaul & Repair designated aircraft parts.

TYPICAL DUTIES:

• 
  
• Performs fitting and assembly operations on various production aircraft parts.
  

• 
  
• Performs teardown and assembly of overhaul & repair aircraft parts.
  

• 
  
• Cleans and applies special adhesives to materials resulting in a permanent bonding of the materials. Sets up and controls furnace temperature in accordance with established specifications.
  

• 
  
• Must be capable of reading and interpreting blueprints, operation sheets, technical specifications and overhaul manuals.
  

• 
  
• Maintains necessary records and files.
  

• 
  
• Works with limited supervision.
  

• 
  
• Assists operators in a lower classification on assembly techniques as needed.
  

• 
  
• Performs temporary part marking, In process transfer marking and final part parking operations using Vibro Engraving, Electro-chemical Etch, Ink Stamp, Dot-Peening, and Paint marking with suitable legibility to meet drawing or customer specification requirements
  

• 
  
• Works under supervision with salary and hourly support groups to address the most complex problems.
  

• 
  
• Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
  

• 
  
• Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
  

• 
  
• Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
  

• 
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
  

This position is currently accepting applications.

Apply Now

FUNCTION:

Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.

TYPICAL DUTIES:

• 
  
• 
  

  Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.

  
  
  

• 
  
• 
  

  Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.

  
  
  
• 
  
  

  Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.

  
  
  
• 
  

  Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.

  
  
  
• 
  

  Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.

  
  
  
• 
  

  Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.

  
  
  
• 
  

  Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.

  
  
  
• 
  

  Must be capable & willing to assist or train other employees in this or lower classifications as needed.

  
  
  
• 
  
  

  Refer difficulties to leader or supervisor as appropriate

  
  
  

  May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.

  
  
  

This position is currently accepting applications.

Apply Now

FUNCTION:

In an assigned area or cell, under general supervision perform complex polishing and finishing operations of exacting tolerance on production or overhaul and repair parts. Parts are typically at or near final stages of the manufacturing process, with tight tolerance limits, requiring intense period of concentration for extended periods of time.

TYPICAL DUTIES:

• 
  
• Work from drawings, sketches, computer-generated information and verbal instructions to plan the polishing, finishing or re-work operation to be performed.
  

• 
  
• Must be capable of following standard finishing applications in order to achieve dimensional integrity and required finish characteristics.
  

• 
  
• Must have comprehensive understanding of the material characteristics being worked on in order to determine the appropriate wheel, grit, compound or abrasive texture to use in order to achieve desired finish and dimension.
  

• 
  
• Perform precise chamfering operations on parts, without damaging other critical part dimensions
  

• 
  
• Work from quality review and corrective work documents to repair or rework parts.
  

• 
  
• Use precision measuring instruments in order to gage various critical dimension and tolerance limits, in accordance with established parameters or blue print requirements.
  

• 
  
• Performs temporary part marking and In process transfer marking operations using Vibro Engraving, Electro-chemical Etch, or Ink Stamp, methods with suitable legibility to meet drawing or customer specification requirements
  

• 
  
• Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
  

• 
  
• Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
  

• 
  
• Refer difficulties to leader or supervisor as appropriate.
  

• 
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
  

This position is currently accepting applications.

Apply Now

Job Title: Product Manager (Beazley Digital - API/Services)

Division: Beazley Digital

Reports To: As per Beazley's organisation chart

Key Relationships:

Head of Digital Underwriting, Head of Digital Operations

Within Beazley:CIO, other senior IT Leads, Head of PMO/VRF, Enterprise Architect, Other Product/Project Managers, Commercial Management, Information Security, External Suppliers

Job Summary:

The product manager is accountable for the technology roadmap, design, development, enhancement, delivery, and budgeting for the digital product /technologies they lead. Ensuring technology is aligned to business value, OKRs and target architecture. The role ensures the technology is developed and maintained using sound business and technology management practices and it supports business transformation by enabling new capabilities and growth. Using agile and product management methods to ensure you are "delivering the right thing" in "the right way".

Key Responsibilities:

End-to-end Delivery & Execution

• Own end-to-end delivery of product/technology initiatives, ensuring alignment from discovery through deployment and ongoing optimisation.

• Define clear delivery outcomes, success measures and release plans in partnership with Product, Change, Engineering and business stakeholders.

• Lead prioritisation and execution across the delivery lifecycle, balancing strategic objectives with operational needs.

• Ensure teams remove blockers, maintain delivery momentum and operate with high transparency on progress, risks and dependencies.

• Champion agile ways of working, continuous delivery and automation to accelerate time to value.

• Oversee quality assurance, testing and release management to ensure secure, high-quality, production ready outputs.

• Drive postlaunch monitoring, analytics and continuous improvement to maximise product value and performance.

Strategy and Business Management

• Develop and maintain a strategic product roadmap aligned to OKRs and business plans.

• Partner with the business owner and key users to assess current and future needs and shape multiyear plans.

• Continuously refine governance and decision-making processes across run, grow and transform activity.

• Build, develop and retain a high performing technology delivery team.

• Work with digital leadership to define cost and resourcing models and support effective demand planning.

Budget Management

• Collaborates with the digital leadership team and business owner to make funding and resource reallocation decisions.

• Manages the product budget including run, growth and transform, makes informed and dynamic investment prioritization decisions supported by data.

Technology Management

• Work with Group Technology, Information Security, Data Management and Architecture teams to align and leverage enterprise architecture.

• Oversee day-to-day technology operations and drive continuous improvement in performance, security, availability and usability.

• Define and track channel KPIs to improve adoption, performance and user experience.

• Coordinate with other product managers to avoid duplication and manage interdependencies.

• Manage vendor relationships in line with group frameworks and build strategic partnerships aligned to Beazley Digital's OKRs.

• Embed industry standards and practices such as Agile, DevOps, InfoSec and modern data architecture to ensure resilience and agility.

Digital Transformation

• Act as the technology contact for the product, partnering with cross functional teams to evolve processes and operating models.

• Scale innovation and new insurance propositions into the channel where feasible.

• Recommend business process, commercial and UX improvements to enhance adoption.

• Apply design thinking, customer journey mapping and data insights to drive end-to-end channel value.

• Identify and champion emerging business and technology trends that support channel OKRs.

• Contribute to embedding digital opportunities into Beazley Digital's strategy to drive growth, efficiency and risk reduction.

General:

It is important that within all your interactions both internally and externally you adhere Beazley's core values - Being Bold, Striving for Better, and Doing the Right Thing as they contribute to an internal environment of teamwork and promote a positive brand image and experience to our external customers. We also expect Beazley employees to:

• Comply with Beazley procedures, policies and regulations including the code of conduct which incorporates the PRA and FCA Conduct.

• Undertake training on Beazley policies and procedures as delivered by your line manager, the People & Sustainability or assurance teams (compliance, risk, internal audit) either directly, via e-learning or the learning management system.

• Display business ethics that uphold the interests of all our customers.

• Ensure all interactions with customers are focused on delivering a fair outcome, including having the right products for their needs.

• Comply with any specific responsibilities necessary for your role as outlined by your line manager, the People & Sustainability or assurance teams (compliance, risk, internal audit) and ensure you keep up to date with developments in these areas. This may include, amongst others, Beazley's underwriting control standards, Beazley's claims control standards, other Beazley standards and customer relationship management.

• Carry out additional responsibilities as individually notified, either through your objectives or through the learning management system. These may include membership of any Beazley committees or working groups.

Personal Specification:

Education and Qualifications

• Product Management or Product Owner certification desirable but not essential

• Agile certification desirable but not essential

Skills and Abilities

• Strong business understanding and ability to work in partnership with the business

• Strong Technology Product Management skills and/or Programme Management skills

• Demonstrated ability to manage technology and business change projects with demonstrated delivery of business value and pursuit of quality

• Experienced in change management, able to understand and advise on how to implement process, technology and people changes while minimising the delivery risks

• Understanding of business strategy and the work of the teams within the customer organisation

• Able to identify and help the team assess options and solutions that best fit business requirements

• Proven team management and leadership capability within a change and technology context

Knowledge and Experience

• Previous experience in technology

• Previous experience in budget management

• Previous experience of delivering multiple, complex IT projects, preferably covering the use of internal resources, third party (packaged) solutions and outsourced services

• Previous experience of the use of various analysis and delivery frameworks covering scope definition, planning, budgeting, reporting, management of risks and issues

• Previous experience working with an Agile methodology preferred

• Previous experience building and maintaining effective working relationships

• Previous experience managing an outsourced team

Aptitude and Disposition

• Delivery focussed, self-motivated, flexible and enthusiastic

• Relentless curiosity

• Learning Agility

• Open Disposition

• Judgement

• Digital Acumen

• Customer focus

• Strategic thinking

Competencies

• Proactive

• Information seeking

• Flexible

• Detail oriented

• Purposeful communication

• Leadership

• Team working

• Negotiation and influencing

• Problem solving

• Customer focus

• Decision making

Who We Are:

Beazley is a specialist insurance company with over 30 years' experience helping people, communities and businesses to manage risk all around the world. Our mission is to inspire our clients and people with the confidence and freedom to explore, create and build - to enable businesses to thrive. Our clients want to live and work freely and fully, knowing they are benefitting from the most advanced thinking in the insurance market. Our goal is to become the highest performing sustainable specialist insurer.

Our products are wide ranging, from cyber & tech insurance to marine, healthcare, financial institutions and contingency; covering risks such as the weather, film production or protection from deadly weapons.

Our Culture

We have a wonderful mix of cultures, experiences, and backgrounds at Beazley with over 2,000 of us working around the world.Employee's diversity,experience and passion allow us to keep innovating and moving forward, delivering the best. We are proud of our family-feel culture at Beazley that empowers our staff to work from when and where they want, in an adult environment that is big on collaboration, diversity of thought and personal accountability. Our three core values inspire the way we work and how we treat our people and customers.

• Be bold

• Strive for better

• Do the right thing

Upholding these values every day has enabled us to become an innovative and responsive organization in touch with the changing world around us - our ambitious inclusion & diversity and sustainability targets are testament to this.

We are a flexible and innovative employer offering a friendly, collaborative, and inclusive working environment. We actively encourage and expect applications from all backgrounds. Our commitment to fostering a supportive and dynamic workplace ensures that every employee can thrive and contribute to our collective success. Explore a variety of networks to assist with professional and/or personal development.

Our Employee Networks include:

• Beazley RACE - Including, understanding and celebrating People of Colour

• Beazley SHE - Successful, High potential, Empowered women in insurance

• Beazley Proud - Our global LGBTQ+ community

• Beazley Wellbeing - Supporting employees with their mental wellbeing

• Beazley Families - Supporting families and parents-to-be

We encourage internal career progression at Beazley, giving you all the tools you need to drive your own career here, such as:

• Internal Pathways (helping you grow into an underwriting role)

• iLearn (our own learning & development platform)

• LinkedIn Learning

• Mentorship program

• External qualification sponsorship

• Continuing education and tuition reimbursement

• Secondment assignments

The Rewards

• The opportunity to connect and build long-lasting professional relationships while advancing your career with a growing, dynamic organization

• Attractive base compensation and discretionary performance related bonus

• Competitively priced medical, dental and vision insurance

• Company paid life, and short- and long-term disability insurance

• 401(k) plan with 5% company match and immediate vesting

• 22 days PTO (prorated for 1st calendar year of employment), 11 paid holidays per year, with the ability to flex the religious bank holidays to suit your religious beliefs

• Up to $700 reimbursement for home office setup

• Free in-office lunch, travel reimbursement for travel to office, and monthly lifestyle allowance

• Up to 26 weeks of fully paid parental leave

• Up to 2.5 days paid annually for volunteering at a charity of your choice

• Flexible working policy, trusting our employees to do what works best for them and their teams

Salary for this role will be tailored to the successful individual's location and experience. The expected compensation range for this position is $85,000 - $107,000 per year plus discretionary annual bonus.

Don't meet all the requirements? At Beazley we're committed to building a diverse, inclusive, and authentic workplace. If you're excited about this role but your experience doesn't perfectly align with every requirement and qualification in the job specification, we encourage you to apply anyway. You might just be the right candidate for this, or one of our other roles.

Division Manager – Progressive Stamping Manufacturing

Position Overview

We are seeking an experienced Division Manager with a strong background in Progressive Stamping and Progressive Dies to lead operations, drive profitability, and support strategic growth initiatives. This role carries full P&L responsibility and oversees production, quality, delivery, and operational performance.

This is a leadership opportunity for a manufacturing professional with proven experience in Lean Manufacturing, operations management, and team leadership.

Key Responsibilities

• Lead and develop divisional staff to ensure performance, safety, and professional growth
• Oversee full divisional Profit & Loss (P&L) responsibility
• Drive performance in quality, on-time delivery, inventory turns, cost control, and profitability
• Communicate company strategy and operational targets across teams
• Manage hiring, performance evaluations, compensation changes, and workforce planning
• Lead capital planning and operational budgeting
• Implement and drive Lean Manufacturing initiatives to improve quality, cost, and delivery
• Partner cross-functionally with Customer Service, Estimating, Production Control, and Finance
• Support profitable sales and marketing programs through operational excellence

Required Qualifications

• Direct experience with Progressive Stamping and Progressive Dies (required)
• Strong background in manufacturing leadership / plant management / operations management
• Demonstrated success managing teams in a production environment
• Experience with Lean Manufacturing, continuous improvement, and process optimization
• Proven ability to recruit, train, and develop high-performing teams
• Strong project management and prioritization skills
• Analytical and data-driven decision-making ability
• Bachelor’s degree in Engineering, Business, or related field preferred (or equivalent experience)
• Results-driven with strong business acumen
• Ability to balance operational efficiency with long-term growth initiatives

Aveanna Healthcare is hiring a Nurse Supervisor in your area!  Make a difference every single day by being a part of the delivery of unmatched clinical care for Aveanna’ s clients at home.  Put your management skills to use by leading, teaching and mentoring staff to ensure they are offered ongoing support while ensuring Aveanna’ s  clients remain at the forefront of everything we do and receive the best care possible!

Clinical Supervisor (RN)   

(Nursing Supervisor)  

Aveanna Healthcare is a leading national provider of home health services to medically fragile children and adults. Our mission is to revolutionize the way homecare is delivered, one patient at a time.     

This is a fantastic opportunity for a talented nurse looking to expand their career, truly increasing the number of lives they impact daily in their own community. The administrative component of this job will consist of internal case management, completing patient intake and discharge to home, our start of care process and nurse competency validation. The field-based aspect of this position will create opportunities for you to spend quality time with field staff in patient homes developing, mentoring and providing professional guidance.  

Work Location: Plainville, CT location, in-home visits and Potential Hybrid (varies based on branch need)    

Compensation: $77-83k base salary, plus bonus potential (up to 10% of salary based on branch performance), on call pay, cell phone and mileage reimbursement.   Up to 80 hours of vacation accrual in the first year, 48 hours of sick time accrual, 1 8-hour fun day and 1 8-hour inclusion day. Vacation hours accrual will increase to 120 hours of vacation after 1st year.  

What our Clinical Leaders find working at Aveanna:    

• Compassion and Purpose- Empower nurses to reach their full potential   

• Community and Connection- Impact multiple patient and family lives   

• Flexibility and Understanding- Varying work schedule- some office, some field   

• Growth and Inclusion- Career and Skillset Advancement Opportunities    

• Excitement and Happiness- A place to call HOME      

Why Choose a Nursing Supervisor Role at Aveanna?  

• Health, Dental, Vision, and Company-paid Life Insurance    

• Paid Holidays, Paid Vacation Days, Paid Sick Days*   

• Fun Day and Inclusion Day   

• Monthly Cell Phone Stipend and Bonus Potential   

• Mileage reimbursement   

• 401(k) Savings Plan with Employer Matching    

• Employee Stock Purchase Plan with Employee Discount    

• Tuition Discounts and Reimbursement Program (conditions apply)   

• Company-sponsored continuing education credits 

• Nationwide Footprint w/advancement opportunities   

• Awards and Recognition Program    

• Employee Relief Fund   

• Employee Resource Groups  

Responsibilities of the Nursing Supervisor   

• Internal case management, evaluation, education and development of nursing talent   

• Participating in the transition of our patients from the facility to their home through “Start of Care Assessments” and “Re-evaluations”   

• Review physicians’ orders and update the plans of care and documentation, as necessary   

• Assist with selecting, training and validation of new clinical staff   

• Promote and enhance the level of clinical expertise of staff to provide safe and quality nursing care for our patients   

• Collaborating with the operations and business development team   

• Ensure adherence to State, Federal, Local regulations and Aveanna policies and procedures   

Qualifications of the Nursing Supervisor:   

• Must have good standing license (RN) in the state in which the clinician will practice   
• Must have at least 3 years of hands-on nursing experience in a hospital or home care setting

•  Must be able to travel to patients’ homes in designated territory   

• Must have reliable transportation, valid driver’s license, and pass MVR check   

• Current CPR certification from AHA or ARC 

• Must be willing to supervise caregivers providing care to infants, children, adolescents and/or adults   

Aveanna Healthcare is an Equal Opportunity Employer and encourages applicants from diverse backgrounds to apply.    

CCPA Notice for Job Applicants, Contractors, and Employees Residing in California  

*Benefit eligibility is dependent on employment status 

As an employer accepting Medicare and Medicaid funds, employees must comply with all health-related requirements in all relevant jurisdictions, including required vaccinations and testing, subject to exemptions for medical or religious reasons as appropriate.

Notice for Job Applicants Residing in California

Notice for Job Applicants Residing in Florida

Aveanna Healthcare is hiring a Nurse Supervisor in your area!  Make a difference every single day by being a part of the delivery of unmatched clinical care for Aveanna’ s clients at home.  Put your management skills to use by leading, teaching and mentoring staff to ensure they are offered ongoing support while ensuring Aveanna’ s  clients remain at the forefront of everything we do and receive the best care possible!

Clinical Supervisor (RN)   

(Nursing Supervisor)  

Aveanna Healthcare is a leading national provider of home health services to medically fragile children and adults. Our mission is to revolutionize the way homecare is delivered, one patient at a time.     

This is a fantastic opportunity for a talented nurse looking to expand their career, truly increasing the number of lives they impact daily in their own community. The administrative component of this job will consist of internal case management, completing patient intake and discharge to home, our start of care process and nurse competency validation. The field-based aspect of this position will create opportunities for you to spend quality time with field staff in patient homes developing, mentoring and providing professional guidance.  

Work Location: Shelton, CT & Plainville, CT branch locations, in-home visits.

Compensation: $77-83k base salary, plus bonus potential (up to 10% of salary based on branch performance), cell phone and mileage reimbursement, on call  pay (if applicable).   Up to 80 hours of vacation accrual in the first year, 48 hours of sick time accrual, 1 8-hour fun day and 1 8-hour inclusion day. Vacation hours accrual will increase to 120 hours of vacation after 1st year.  

What our Clinical Leaders find working at Aveanna:    

• Compassion and Purpose- Empower nurses to reach their full potential   

• Community and Connection- Impact multiple patient and family lives   

• Flexibility and Understanding- Varying work schedule- some office, some field   

• Growth and Inclusion- Career and Skillset Advancement Opportunities    

• Excitement and Happiness- A place to call HOME      

Why Choose a Nursing Supervisor Role at Aveanna?  

• Health, Dental, Vision, and Company-paid Life Insurance    

• Paid Holidays, Paid Vacation Days, Paid Sick Days*   

• Fun Day and Inclusion Day   

• Monthly Cell Phone Stipend and Bonus Potential   

• Mileage reimbursement   

• 401(k) Savings Plan with Employer Matching    

• Employee Stock Purchase Plan with Employee Discount    

• Tuition Discounts and Reimbursement Program (conditions apply)   

• Company-sponsored continuing education credits 

• Nationwide Footprint w/advancement opportunities   

• Awards and Recognition Program    

• Employee Relief Fund   

• Employee Resource Groups  

Responsibilities of the Nursing Supervisor   

• Medical Record Reviews/QA
• Internal case management, evaluation, education and development of nursing talent   

• Participating in the transition of our patients from the facility to their home through “Start of Care Assessments” and “Re-evaluations”   

• Review physicians’ orders and update the plans of care and documentation, as necessary   

• Promote and enhance the level of clinical expertise of staff to provide safe and quality nursing care for our patients   

• Collaborating with the operations and business development team   

• Ensure adherence to State, Federal, Local regulations and Aveanna policies and procedures   

Qualifications of the Nursing Supervisor:   

• Must have good standing license (RN) in the state in which the clinician will practice   

• Must have at least 3 years of hands-on nursing experience in a hospital or home care setting

• Must be able to travel to patients’ homes in designated territory   

• Must have reliable transportation, valid driver’s license, and pass MVR check   

• Current CPR certification from AHA or ARC 

• Must be willing to supervise caregivers providing care to infants, children, adolescents and/or adults   

Aveanna Healthcare is an Equal Opportunity Employer and encourages applicants from diverse backgrounds to apply.    

CCPA Notice for Job Applicants, Contractors, and Employees Residing in California  

*Benefit eligibility is dependent on employment status 

As an employer accepting Medicare and Medicaid funds, employees must comply with all health-related requirements in all relevant jurisdictions, including required vaccinations and testing, subject to exemptions for medical or religious reasons as appropriate.

Notice for Job Applicants Residing in California

Notice for Job Applicants Residing in Florida

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 3rd shift.

3rd shift hours are Monday through Friday from approximately 11:00 pm to 7:00 am.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 1st shift.

1st shift hours are Monday through Friday from approximately 6:30 am to 3:30 pm.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need fora Facilities Mechanic Pipefitter 1st Shift (onsite)

What You Will Do:

• Perform repetitive tasks related to preventative maintenance, supply and servicing of facilities, machinery and equipment.
• Assist trade groups as required.
• Under the direction of supervisor or project leader, work from specified methods and procedures, exercise care and use judgment for routine tasks associated with machine and equipment servicing and assist trades groups on projects.
• Assist others in system operation, care, use and preventative maintenance techniques where a limited knowledge of specialized trade terminology is required to understand instructions.
• Work with manufacturing departments and trades groups responsible for developing preventative maintenance servicing schedules for machine tools and equipment.
• Preform similar duties throughout the facility within the scope and skill level of this job description. Assist other trades working on joint projects where common skill crossover provides the opportunity for shared responsibilities and more effective use of skills.
• Refer difficulties to leader/supervisor.
• May be required to train for, obtain and maintain licenses, operator permits and certifications for assigned area.

Qualifications You Must Have:

• High School/ GED
• Requires knowledge of arithmetic involving decimals and fractions to work from drawings and sketches make required computations and to work with variable measuring instruments. 
• 6-12 months experience.

Qualifications We Prefer:

• Should be able to read and comprehend service manuals, instruction booklets and use mechanics’ hand and power tools.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is onsite.Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious.

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

This position is for 2nd shift. Hours are Monday - Friday 3:12pm - 11:59pm.

What You Will Do:

• Under direction of leader/supervisor, follow assembly drawings and/or specifications and computer information systems to prepare parts and build subassemblies, modules and accessories for new gas turbine engines where tooling and process methods are established. Perform similar duties assisting with engine test operations and performing component and accessory tests as assigned.

• Use overhaul and repair procedures and specifications to perform the mechanical work to overhaul engines, modules and related components.

• Obtain parts, check details for conformance to assembly requirements and fit and measure components to assure overall dimensions are within limits specified.

• Use mechanic’s hand tools, holding fixtures, and specialized assembly equipment to build engine sections and perform installation of details and maintain equipment and tooling for assigned areas.

• Provide related support for test operations and assist with testing under direct supervision and specific test schedules.

• Perform similar duties to assist with co-producer, customer support or other similar programs, retrofit projects and to accommodate new engine programs and assist with changes in specifications.

Qualifications You Must Have:

• High School Diploma or Equivalent & formal training in a specialized field achieving A&P license or equivalent OR 4 years of technical high school including technical post high school certification and 5+ years of heavy automotive experience.

Qualifications We Prefer:

• Experience as an aerospace mechanic or A&P mechanic preferred.

• 3 + years avionics mechanic experience.

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

• In accordance with state and federal regulations, assists the pharmacist, under direct supervision, in the practice of pharmacy. Assists the pharmacist in the performance of other Pharmacy Department duties in accordance with Company policies and procedures.
• Responsible for using pharmacy systems to obtain patient and drug information and process prescriptions. If PTCB certified, assists with and coaches pharmacy technicians in the operation of pharmacy systems and cashiers in the operation of the pharmacy cash registers.
• Models and delivers a distinctive and delightful customer experience.

• Engages customers and patients by greeting them and offering assistance with products and services. Resolves customer issues and answers questions to ensure a positive customer experience.
• Models and shares customer service best practices with all team members to deliver a distinctive and delightful customer experience, including interpersonal habits (e.g., greeting, eye contact, courtesy, etc.) and Walgreens service traits (e.g., offering help proactively, identifying needs, servicing until satisfied, etc.).
• Develops strong relationships with most valuable customers.

• Under the supervision by the pharmacist, assist in the practice of pharmacy, in accordance with state, federal, and company policy. Reviews and complies with the Walgreen Co. Pharmacy Code of Conduct.
• Performs duties as assigned by Pharmacy Manager, Staff Pharmacist and Store Manager including utilizing pharmacy systems to enter patient and drug information, ensuring information is entered correctly, filling prescriptions by retrieving, counting and pouring pharmaceutical drugs, verifying medicine is correct, and checking for possible interactions. Assists pharmacists in scheduling and maintaining work flow.
• Reports, immediately, prescription errors to pharmacist on duty and adheres to Company policies and procedures in relation to pharmacy errors and the Quality Improvement Program.
• Strictly adheres to the Walgreen Co. policy regarding Good Faith Dispensing during all applicable prescription dispensing activities.
• Responsible and accountable for registering all related sales on assigned cash register, collects and handles cash as required. Takes customer to OTC aisle when possible to assist in locating products.
• Handles telephone calls that do not require personal attention of the pharmacist, including those to physicians.
• Processes (corrects and resubmits) manual claims for third party program prescription services in a timely and efficient manner, and performs other clerical duties, as assigned by the Pharmacy Manager.
• Assists and supports Pharmacy Department on inventory management activities, such as, ordering, unpacking, checking and storing shipment of pharmaceuticals. Maintains knowledge of Company asset protection techniques, and files claims for warehouse overages (merchandise received, but not billed), shortages (merchandise billed, but not received), order errors or damaged goods involving Rx drugs.
• May assist pharmacist in administering clinical services including the collection and proper labeling of blood/urine samples from patients and other clinical services as required; assists pharmacy staff in coordination of clinical services, Walgreens healthcare clinics and external providers.
• Assists Pharmacy Manager and Staff Pharmacist in developing and maintaining good relationships with the local medical community, including physicians, nurses, and other health care providers, by medical provider detailing and outreach to health groups, retirement homes, nursing homes, and other forums for enhancing growth opportunities.
• Assists with exterior and interior maintenance by ensuring the Pharmacy Department is stocked with adequate supplies, clean, neat and orderly in condition and appearance.
• Complies with all company policies and procedures; maintains respectful relationships with coworkers.
• Completes special assignments and other tasks as assigned.

• Earns and maintains PTCB certification through the designated PTCB training program and/or state required certification/registration. Otherwise, earns PTCB certification as condition of promotion to senior technician.
• Attends training requested by Manager and acquires continuing education credits. Maintains knowledge and skill in healthcare and pharmacy, including latest news and developments.

• Must be fluent in reading, writing, and speaking English. (Except in Puerto Rico)
• Requires willingness to work flexible schedule, including evening and weekend hours.

• Prefer six months of experience in a retail environment.
• Prefer to have prior work experience with Walgreens.
• Prefer good math skills so they can fill prescriptions accurately, including counting, measuring and weighing medications.
• Prefer good computer skills.
• Prefer the knowledge of store inventory control.
• Prefer PTCB certification.

Location Detail: MMH-71 Haynes Street (10627)

Shift Detail: 3p-11p

Work where every moment matters.

 
Every day, over 40,000 Hartford HealthCare colleagues come to work with one thing in common: Pride in what we do, knowing every moment matters here. We invite you to become part of Connecticut’s most comprehensive healthcare network.

The Greater Manchester Region has approximately 2,500 employees. It includes Manchester Memorial Hospital, a 249-bed community hospital, Rockville General, a campus of Manchester Memorial Hospital, a 102-bed facility, a large multispecialty provider group and visiting nurse services. The Greater Manchester Region serves a region of 300,000 people in 19 towns.

POSITION SUMMARY:

Utilizing the nursing process, provides high quality direct and indirect patient –centered care. Coordinates patient care by working collaboratively with the interdisciplinary team. Communicates, as appropriate, the patient's clinical condition, responding quickly and accurately to changes in condition or response to treatment. Demonstrates knowledge of the principles of growth and development over the life span and the skills necessary to provide age appropriate care to the patient population served. Promotes the profession of nursing and professional practice through collegial support and interactions. Reports to the Clinical Nurse Manager.

COMPETENCIES:

• Must be able to communicate effectively using the English language, both verbally and in writing.

• Possesses basic computer skills. 

ESSENTIAL DUTIES and RESPONSIBILITIES:

Job-Specific Competency

· Performs population-specific comprehensive assessments and re-assessments of the patient's condition and care needs including the psychosocial, physical, educational and cultural aspects.

· Assess and reassess pain. Utilizes appropriate pain management tools and techniques. Educates the patient and family regarding pain management. Documentation reflects assessments, interventions and evaluation of effectiveness.

· Develops and revises individualized plans of care as indicated by assessment and patient response to treatment., collaborating with other disciplines as needed

· Follows the five (5) medication rights and reduces the potential for medication errors. Demonstrates knowledge of medications and their correct administration based on age of the patient and their clinical condition.

· Performs all aspects of patient care in an environment that optimizes patient safety and promotes positive patient outcomes.

· Documents the nursing process and responses to care in a timely manner utilizing the appropriate tools.

· Demonstrates an ability to be flexible, organized and function under stressful situations. Utilizes critical thinking skills and sound judgment in priority setting and delegation.

· Formulates and implements a teaching plan for patients and families based upon identified learning needs. Evaluates effectiveness of learning.

· Demonstrates autonomous practice, consistent with evidence-based standards. Pursues personal and professional growth and development. Serves as a professional role model and mentor.

· Demonstrates knowledge of the principles of growth and development over the lifespan and the skills necessary to provide age-appropriate care to patients served. Able to interpret data about the patient status in order to identify each patient's age-specific needs and provide care needed by the patient group.

· Demonstrates ability to assist physicians with procedures in the peri anesthesia care setting, including cardio-version and insertion of peripheral and central monitoring lines, and epidural catheter placement.

· Demonstrates knowledge of airway management and the ability to use appropriate equipment

· Demonstrates ability to assess cardio-respiratory systems for changes and provides appropriate treatment.

· Demonstrates knowledge of anesthetic drugs, actions and side effects.

· Provides an accurate and pertinent report of the patient's condition for safe transfer of care.

EDUCATION/CERTIFICATION

• Must be a graduate of an accredited school of Nursing and have and maintain current a Registered Nurse license in the State of Connecticut.

• Must have certification in Basic Cardiac Life Support and Advanced Cardiac Life Support upon hire or receive certification within the new employee introductory orientation period and maintain clinical competency during employment in this role.

• Critical care experience preferred.

We take great care of careers

With locations around the state, Hartford HealthCare offers exciting opportunities for career development and growth. Here, you are part of an organization on the cutting edge – helping to bring new technologies, breakthrough treatments and community education to countless men, women and children. We know that a thriving organization starts with thriving colleagues-- we provide a competitive benefits program designed to ensure work/life balance. Every moment matters. And this is your moment

Want to make extra money on YOUR schedule? Join our exclusive list of research study participants and start earning extra income today! Perfect for anyone seeking remote, part-time, or temporary work, these opportunities require no previous experience and offer unmatched flexibility. Choose the studies that suit you best—whether online, in-person, or over the phone—and get paid for sharing your opinions. Don't miss out on this chance to turn your free time into valuable earnings! Sign up now and take control of your work-life balance.

• Health Issues (Research for cures and new medications to treat ailments)
• Consumer Products (Your experience with consumer products)
• Shopping (Shopping experiences)
• Internet Usage (How you use the internet)
• Vehicles (recreational vehicles and automobiles)
• Employment (Various types of jobs or career fields)
• Food & Beverages (the consumption of various foods and bevera ges)
• Entertainment (About TV, movies or video games)
• Social Media (the use of different social media platforms)
• Financial (Banking and investing)
• Retirement (Planning what, when and how)
• Gender (studies based on your gender)
• Housing (Renters or Homeowners)

• Earn up to $250+ in Just ONE Hour! (Focus Group Session)
• Earn up to $3,000+ (Multi-Session Studies)

• Flexibility to take part in discussions online or in-person.
• No commute needed if you choose to work from home.
• No minimum hours. You can do this part-time or full-time
• Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products.
• You get to review and use new products or services before they are launched to the public.

• Speak and/or read English
• Must be 18yrs old or older
• Must have either a phone, computer or tablet with internet connection

• Start Immediately - No Experience Needed! Anyone Can Participate!

• Open to all education levels - Your opinion matters!