Engineering Jobs in Irvine Ca Remote

Battery Pack CAE Model Build Engineer (Safety, Durability & NVH)

Irvine, CA

Onsite

C2C

Must Have Skills: Battery Pack CAE Model Design& develop, ANSA, Meshing,

Preferred: LS-Dyna, Optistruct, Nastran, Abaqus

Role Objective:

Deploy one (1) engineer to provide full vehicle CAE model build and ongoing support for battery pack CAE models across Structural Safety, Durability, and NVH domains. The engineer will build, update, debug, and deliver analysis-ready battery pack models integrated to the vehicle BIW, in accordance with Purchaser-provided standards for numbering, mesh criteria, and joining methodology.

Key Responsibilities / Scope of Services

Develop and maintain battery pack CAE models for each major build release including:

Durability models in Abaqus or OptiStruct template (per Purchaser requirement).

LS-DYNA durability sub-models for the battery system (e.g., Ground Strike, Top Strike).

NVH structural battery models in OptiStruct, including full pack content and BIW integration.

Structural Safety LS-DYNA crash models (homogenized sub-assemblies and/or higher fidelity per program phase).

Build full battery model content as required (structure, plastics, HV network, adhesives, potting) and connect to BIW using subsystem include files and master connection files (including BIW-to-subsystem connection files).

Ensure subsystems are massed per BOM; represent non-modeled content using NSM cards / mass elements and manage trimmed mass and CoG targets as required.

Implement joining representations per Purchaser standards (weld/bond/bolt); represent major bolted joints with solid bolt models and preload where required.

Deliver 0 ms LS-DYNA model debugged to pass error-free model checks; include required instrumentation (force X-sections on major load paths, accelerometers at specified locations).

Support high-fidelity explicit pack models as requested (e.g., cells, cooling plates/features, busbars, vents) and provide de-contented variants when required.

Delivery & Reporting Requirements

Deliver models in compliance with the Purchaser Model Checklist and provide a Seller delivery checklist confirming model run-readiness and documenting any deviations.

Report with each full vehicle CAE model delivery: global energy, mass scaling, and total model mass (as applicable to the domain).

Maintain consistent mesh quality and alignment across domains where required.

Minimum Qualifications (Deployed Engineer)

Demonstrated experience building vehicle CAE models, with battery pack focus preferred.

Proficiency in LS-DYNA, OptiStruct, and Abaqus (as applicable) including model assembly, BIW integration, connections/includes, and debugging.

Strong capability in mesh quality, BOM massing/NSM, joints modeling (weld/bond/bolt), and checklist-driven delivery discipline.

Overview:

Himax Technologies is on the lookout for an experienced Pixel Design Engineer to join our Advanced R&D team in Irvine, California. If you have the right skill set, are detail-oriented with excellent problem-solving and analytical skills and have effective communication skills and the ability to work collaboratively within a team. We would like to hear from you.

This is an in-person position at our Irvine office.

Responsibilities:

This role will participate in new pixel designs and improvements of existing pixels by working closely with other design teams. This position is responsible primarily for pixel layouts including front-end, back-end and optical structure.

> Skillful and creative on optimizing pixel layout based on:

• Process flow information
• Layout design rules
• Pixel timing constraints and noise analysis
• Signal interferences analysis inferred by Capacitance extractions

> Pixel array composition, including:

• Implementing the floorplan of a pixel array
• DRC and LVS verifications on whole pixel array
• The layouts of dark pixel reference and other special pixels
• Interfaces with readout and pixel driver circuits
• Optical structure extensions beyond the active array boundaries

> Optical Design:

• Optimize optical structure layout shifts to accommodate image height dependent module lens CRAs

Requirements:

• Bachelor's degree with 10+ years or Master's degree with 7+ years of hands-on experience with CIS pixel layout
• Masterful on IC layout related EDA tools and layout parasitic capacitance extraction EDA tools
• Knowledgeable about typical physics, basic timing and operation principles of CIS pixel
• Medium level programming skills.

Preferred Experience:

• Background is Electrical Engineering, Physics or Photonics.
• Familiar with CMOS image sensor process integration, device physics and optics are good pluses.

Salary Range

• $120,000- $180,000 (DOE)

The salary offered will depend on several factors, including your location, level, education, training, specific skills, years of experience, and comparison to other employees already in this role.

Location: Irvine, CA (on-site)

*Note that this job is on-site only in Irvine, CA*

Job Summary:

Willow is a health and wellness innovator harnessing the power of artificial intelligence and clinical evidence to drive meaningful change in healthcare. We are using cutting-edge technology, data, and a highly engaging user experience to revolutionize chronic disease management and prevention. We are looking for an experienced Senior Software Engineer to join our growing team. We are looking for strong talent to help us create novel life-changing digital health solutions for our users. We hire creative people and give them autonomy to do great work. Our senior software engineers are comfortable dealing with high-level specifications, working independently and in small teams, and are involved in the product process from start to finish. We need engineers who are excited to try new approaches and collectively learn the right approach to delivering the best health care experiences.

Duties & Responsibilities:

· Work with product managers, designers, and a talented group of engineers to craft unique and beautiful user experiences that will make our mobile solutions best in class.

· Play a critical role in the software architecture, design, and development of our mobile apps.

· Write clean and well-tested code that allows us to keep our applications stable and easily modifiable. Contribute to a knowledge-sharing and an open and collaborative work environment.

Qualifications and Experience

· BS or higher in Computer Science, other related degree, or equivalent work experience.

· 8+ years of experience developing software, with at least 5 years working with Java/Kotlin in mobile application development

· Knowledge of mobile design principles, patterns, and best practices

· Knowledge of push notifications, web technologies and services (HTTP, REST, websocket, etc.)

· Design and development experience with Object Oriented Programming, SOLID principles, MVC, MVVM, Dependency Injection, persisting data

· Understanding of source code management tools, such as Git

· Experience with Kotlin Multiplatform, MongoDB/Realm, Bluetooth framework, IoT and Linux is a plus

· Experience with engineering medical software is a plus

· Team player

Physical requirements/Work Environment

This position primarily works in an office environment. It requires frequent sitting, standing and walking. Daily use of a computer and other computing and digital devices is required. May stand for extended periods when facilitating meetings or walking in the facilities. Some local travel is necessary; therefore, the ability to operate a motor vehicle and maintain a valid Driver's license is required.

The physical demands of the position described herein are essential functions of the job and employees must be able to successfully perform these tasks for extended periods. Reasonable accommodations may be made for those individuals with real or perceived disabilities to perform the essential functions of the job described.

Mechanical Engineer – Aerospace Thermal Management Systems (Integration & Packaging)

Location: Onsite – Irvine CA

Industry: Aerospace & Defense

Citizenship Requirement: U.S. Citizen

Role Overview

We are seeking two highly skilled Mechanical Engineers with experience in the Aerospace & Defense sector to support the development and integration of advanced thermal management subsystems used across military and commercial platforms globally.

This role focuses on mechanical subsystem development from a packaging and integration perspective, including enclosure design and integration of electronic and fluid control components such as pumps, compressors, fans, and valves. The ideal candidate has hands-on experience developing aerospace-grade subsystems within defined volume and interface constraints, ensuring high reliability, environmental robustness, and compliance with industry standards.

These roles will support programs progressing from Preliminary Design Review (PDR) toward Critical Design Review (CDR) and will involve reuse and adaptation of existing product architectures.

Key Responsibilities

• Design and develop mechanical enclosures for aerospace electronic and control subsystems such as thermal management systems and related subsystems
• Package and integrate COTS and custom components into customer-defined volume constraints by integrating components including pumps, compressors, fans, valves, and control electronics
• Develop detailed CAD models, assemblies, and manufacturing drawings (SolidWorks preferred)
• Conduct tolerance analysis, GD&T, stack-up analysis, and design for manufacturability (DFM)
• Support prototype builds, integration activities, testing, and validation
• Implement design considerations to satisfy and qualify the environmental requirements (shock, vibration, temperature, humidity, EMI/EMC interface considerations) per MIL standards.
• Collaborate with electrical, controls, thermal, structural, and systems engineering teams
• Participate in root cause analysis and design refinement
• Ensure compliance with aerospace and defense standards and documentation practices

Required Qualifications

• Bachelor's degree in mechanical engineering or equivalent.
• 5+ years of experience in Aerospace & Defense mechanical subsystem development
• U.S. Citizen (No Dual Citizenship)
• Strong mechanical packaging and integration experience
• Experience designing enclosures housing electronics and fluid/mechanical components
• Exposure to thermal management systems (ECS, vapor cycle, or liquid cooling preferred but not mandatory)
• Working knowledge of rotating machinery components (fans, compressors, pumps)
• Proficiency in CAD tools (SolidWorks preferred; strong experience in other platforms acceptable)
• Experience with GD&T and tolerance analysis
• Familiarity with aerospace environmental standards (MIL-STD preferred)
• Experience supporting qualification and validation testing
• Strong understanding of materials selection for aerospace applications
• Ability to work in cross-functional engineering teams

Preferred Qualifications

• Experience packaging turbomachinery components within constrained aerospace envelopes
• Exposure to controls systems integration
• Knowledge of vibration isolation and shock mitigation techniques
• Experience supporting PDR/CDR processes
• Familiarity with configuration management and aerospace documentation rigor
• Exposure to FMEA, reliability analysis, and lifecycle support

Job Description:

The ideal candidate will have strong experience in multi-layer PCB design for defense electronics systems and proficiency in industry-standard PCB design tools.

Key Responsibilities:

Design and develop multi-layer PCB layouts for defense electronic systems.

Utilize OrCAD/Allegro tools for schematic capture and PCB layout.

Perform high-speed and high-density PCB layout design while ensuring signal integrity and manufacturability.

Ensure PCB designs comply with IPC Class 3 standards and industry best practices.

Collaborate with cross-functional teams including hardware, manufacturing, and testing teams.

Required Skills:

6–10 years of experience in PCB design and layout engineering.

Strong proficiency in OrCAD and Allegro PCB design tools.

Experience with high-speed and high-density PCB layout design.

Knowledge of IPC Class 3 design standards.

IPC CID or CID+ certification is preferred.

About Company:

Who Are We?

ELIQUENT Life Sciences is a leading global consulting group delivering regulatory affairs, pharmacovigilance, quality, and compliance solutions that support pharmaceutical, biotechnology, medical device, and combination product companies across therapeutic modalities, phase-based pathways, and major global markets.

Why explore your future at ELIQUENT?

ELIQUENT Life Sciences is a trusted global consulting firm helping life sciences companies navigate regulatory complexity and bring breakthrough therapies to market. Founded by former regulators and industry experts, we offer end-to-end support in regulatory affairs, pharmacovigilance, and quality compliance. Our team is driven by a shared mission to improve global health through innovation, collaboration, and integrity. At ELIQUENT, you will be part of a purpose-led organization where your expertise contributes to meaningful impact and your growth is supported every step of the way.

About the Role:

The Process Validation Engineer plays a critical role in ensuring that manufacturing processes consistently produce products that meet predetermined quality standards and regulatory requirements. This position involves designing, executing, and documenting validation protocols to confirm that processes operate within defined parameters and yield reliable, reproducible results. The engineer collaborates closely with cross-functional teams including manufacturing, quality assurance, and regulatory affairs to identify process risks and implement corrective actions. By analyzing process data and trends, the engineer supports continuous improvement initiatives that enhance process efficiency and product quality. Ultimately, this role ensures compliance with industry standards and contributes to the successful commercialization of products within the United States market.

Minimum Qualifications:

• Bachelor's degree in Engineering, Science, or a related technical field.
• 3+ years of experience in process validation within a regulated manufacturing environment.
• Strong knowledge of validation principles, methodologies, and regulatory requirements (e.g., FDA, cGMP, ISO).
• Experience with statistical analysis and process capability studies.
• Excellent written and verbal communication skills.

Preferred Qualifications:

• Master's degree in Engineering, Quality Assurance, or related discipline.
• Experience in the pharmaceutical, biotechnology, or medical device industries.
• Familiarity with automation systems and computerized system validation (CSV).
• Certification in Quality or Validation (e.g., ASQ Certified Quality Engineer).
• Proficiency with data analysis software such as Minitab or JMP.

Responsibilities:

• Develop, review, and execute process validation protocols including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ).
• Collaborate with manufacturing and quality teams to identify critical process parameters and quality attributes.
• Analyze process data to assess process capability and identify areas for improvement.
• Prepare detailed validation reports and maintain comprehensive documentation in compliance with regulatory standards such as FDA and ISO.
• Support investigations related to process deviations, non-conformances, and implement corrective and preventive actions (CAPA).
• Participate in risk assessments and process design reviews to ensure robust and compliant manufacturing processes.
• Train and mentor manufacturing personnel on process validation requirements and best practices.

Skills:

The Process Validation Engineer utilizes analytical skills daily to interpret complex process data and ensure manufacturing consistency. Strong communication skills are essential for collaborating with cross-functional teams and documenting validation activities clearly and accurately. Technical expertise in validation protocols and regulatory standards guides the development and execution of robust validation plans. Problem-solving skills are applied to investigate deviations and implement effective corrective actions. Additionally, proficiency with statistical tools and software supports data-driven decision-making and continuous process improvement.

Duration: Full Time

Job Description:

• We are looking for a hands-on Seismic expert to own and evolve our content automation and platform operations ecosystem.
• This role combines platform governance, reporting, and user administration with opportunities to drive automation, workflow optimization, and scalable content architecture improvements.

Responsibilities:

• Own day-to-day Seismic platform operations (access, roles, permissions, profiles).
• Maintain dashboards, reporting architecture, and adoption metrics.
• Document configurations, dependencies, and content workflows.
• Identify and implement opportunities for automation using LiveDocs, LiveForms, DocGen, APIs, or webhooks.
• Improve metadata, content models, tagging, and lifecycle governance.
• Monitor platform health, releases, and regression testing.
• Partner with Sales, Marketing, Sales Ops, and IT to streamline workflows.
• Support continuous improvement of content automation strategy.

Experience:

• Strong hands-on experience with Seismic (admin, configuration, content profiles, reporting).
• Experience with LiveDocs / LiveForms / DocGen Express preferred.
• Ability to balance operational excellence with process improvement.
• Comfortable working cross-functionally in a fast-paced environment.
• Experience with automation, integrations, or scalable governance models is a plus.
• Strong documentation and analytical skills.

Skills:

• Seismic
• LiveDocs / LiveForms / DocGen
• Automation
• Documentation

Education:

• Bachelor's degree.

About US Tech Solutions:

US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Recruiter Details:

Name: Karan

Email:

Internal Id: 26-04336

JOB OPENING - PLUMBING ENGINEER & PROJECT MANAGER

We are a full-service MEP engineering and consulting company. We are servicing the building industry in mechanical, electrical, and plumbing engineering services for different building types such as single-family custom homes, multifamily, mid-rise, high-rise, commercial, office spaces, retail, restaurants, mixed-use, and industrial. We have an opening for Plumbing Engineer &/or Project Manager who can handle the following responsibilities.

• Design of residential and commercial plumbing systems including calculations, piping layout, riser diagrams, equipment schedules, and details

• Coordination of the plumbing plans per developer, builder, architect, civil engineer, and other disciplines plans and requirements.

• Attending design and coordination meetings daily.

• Managing the project from schematic design (SD) phase all the way through the final stages of construction administration (CA).

• Designing the plans using AutoCAD & REVIT

REQUIREMENTS

• Bachelor of Science in Mechanical Engineering or equivalent experience

• Plumbing Design and Project Management experience, 2-6 years (preferred)

• Experience in AutoCAD & REVIT

• Microsoft Office

• Team player and detail oriented

COMPENSATION

• Salary Range: $65K-$75K

• Bonuses

BENEFITS

• Health insurance

• 401K

• Paid time off

• Paid vacations

• Paid sick time

SCHEDULE

• Monday-Friday 8:00 am - 5:00 pm

Partial remote work can be offered, depending on capabilities and upper management approval.

JOB TYPE

• Full Time

Interested applicant should forward resume to:

Mechanical Engineer – Aerospace Turbomachinery Systems

Location: Onsite – Irvine CA

Industry: Aerospace & Defense

Citizenship Requirement: U.S. Citizen (No Dual Citizenship)

Role Overview

We are seeking a Mechanical Engineer with strong turbomachinery design experience to support the development of advanced aerospace thermal management subsystems used across military and commercial platforms globally.

This role focuses on the design and development of rotating machinery, including compressors, pumps, and fans integrated within aerospace thermal systems. The ideal candidate has hands-on experience designing turbomachinery components from concept through validation, with strong grounding in aerodynamics, CFD, structural integrity, and high-speed rotating equipment design.

These programs are entering early development phases prior to Preliminary Design Review (PDR), requiring strong technical leadership in turbomachinery architecture, performance prediction, and mechanical robustness.

Key Responsibilities

• Design and develop mechanical enclosures and subsystems incorporating turbomachinery components
• Lead the mechanical design and development of turbomachinery components including compressors, pumps, and fans
• Perform aerodynamic design and optimization of rotating components
• Conduct or support CFD analysis for flow performance and efficiency validation
• Perform structural analysis of rotating components, including stress, fatigue, and rotor dynamics considerations
• Support bearing selection, shaft design, housing integration, and sealing strategies
• Define performance requirements and conduct trade studies during early-phase system architecture
• Support prototype builds, performance testing, and validation activities
• Ensure designs meet aerospace environmental requirements (shock, vibration, temperature, altitude)
• Collaborate with thermal, systems, controls, and packaging teams for subsystem integration
• Develop detailed CAD models and manufacturing drawings (SolidWorks preferred)
• Participate in root cause analysis, performance troubleshooting, and design improvements
• Ensure compliance with aerospace and defense standards and documentation practices

Required Qualifications

• U.S. Citizen (No Dual Citizenship)
• Bachelor's degree in mechanical engineering or equivalent.
• 7+ years of experience in Aerospace & Defense mechanical subsystem development
• Direct turbomachinery design experience (compressors, pumps, fans, or similar rotating machinery)
• Experience with aerodynamic design principles and performance prediction
• Working knowledge of CFD tools and analysis interpretation
• Experience with structural analysis of rotating components (stress, fatigue, rotor dynamics fundamentals)
• Proficiency in CAD tools (SolidWorks preferred; strong experience in other platforms acceptable)
• Experience supporting early development phases and design reviews
• Familiarity with aerospace environmental standards (MIL-STD preferred)

Preferred Qualifications

• Experience designing turbomachinery for thermal management or Environmental Control Systems
• Familiarity with high-speed electric motor integration
• Experience with balancing, vibration mitigation, and rotating system qualification
• Exposure to FEA tools for structural validation
• Experience progressing programs through PDR/CDR

D'Leon Consulting Engineers is seeking a Financial Administrative Assistant in Los Angeles, CA

Responsibilities

• Assist with payroll processing, timekeeping verification, labor allocations, and coordination with payroll providers
• Support preparation and distribution of offer letters and employment documentation related to payroll setup
• Coordinate new hire payroll onboarding, including tax forms, direct deposit setup, and system access
• Maintain payroll, labor, and employee status records to ensure accuracy and compliance
• Track and maintain labor costs, overhead, and administrative expenses across projects and departments
• Prepare and update cost tracking logs, summaries, and basic financial reports to support management and project teams
• Assist with invoice review, expense report processing, and reconciliation of administrative and project-related costs
• Support budgeting and cost monitoring activities by maintaining accurate financial documentation
• Maintain organized financial, payroll, and administrative records in accordance with company policies and regulations
• Assist with documentation preparation for audits, compliance reviews, and internal financial reporting
• Track and maintain employee certifications, licenses, and required training records as they relate to compliance and billing
• Assist with tracking, maintenance, and renewal of small business certifications (e.g., SBE, DBE, WBE, MBE)
• Attend internal coordination meetings and support cross-functional financial and administrative activities
• Provide administrative support to management and project teams with an emphasis on financial accuracy and reporting
• Contribute to organizational goals through accuracy, accountability, and proactive financial administrative support

Qualifications

• Bachelor’s degree in Accounting, Finance, Business Administration, or a related field preferred
• 2–4 years of experience in accounting support, payroll administration, or financial administrative roles
• Hands-on experience with payroll processing, timekeeping, or labor cost tracking
• Basic understanding of accounting principles, cost tracking, and financial documentation
• Experience supporting invoice processing, expense reconciliation, or financial reporting
• Strong recordkeeping skills with the ability to manage confidential financial and payroll information
• Proficiency with Microsoft Excel (spreadsheets, data entry, basic formulas) and Microsoft Office Suite
• Experience with payroll systems, accounting software, or ERP platforms preferred
• Highly detail-oriented with strong organizational and time management skills
• Effective written and verbal communication skills
• Ability to work across departments and support multiple stakeholders in a professional environment
• Ability to produce accurate and timely results while maintaining a service-oriented mindset
• Knowledge or experience with SBE/DBE/MWBE or other small business certification programs preferred

D’Leon Consulting Engineers is an equal opportunity employer committed to fostering an inclusive and respectful workplace. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status.

*At Securian Financial the internal position title is Infrastructure Dir."

Mission

"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."

Positioning

The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.

This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.

• Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.

• Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.

• Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.

Scope of Accountability

Resilience Engineering & Cloud Reliability

• Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.

• Own resilience automation, chaos testing, and IaC-based recovery validation.

• Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.

Quality Engineering & Continuous Testing

• Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.

• Drive automation-first testing (functional, non-functional, performance, resilience).

• Embed observability-driven quality validation and contract testing across services.

Performance, Capacity & Efficiency Engineering

• Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).

• Partner with Platform & Infrastructure teams to tune performance across application and platform layers.

• Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.

Cross-Domain Architecture Collaboration

• Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.

• Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.

• Engage Data Architects for data resilience, replication, and pipeline reliability.

• Work with Business Architects to align technical reliability goals with critical business outcomes.

Leadership & Talent Development

• Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.

• Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.

• Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.

Core Technical Competencies

• AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.

• Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.

• Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.

• Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.

• Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.

• Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.

• Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.

• FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.

Leadership Competencies

• Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.

• Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.

• Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.

• Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.

• Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.

Qualifications & Experience

• 12+ years in cloud engineering, reliability, or platform leadership roles.

• 5+ years leading Sr. Managers/Managers in technical domains.

• Proven expertise across AWS, with working knowledge of Azure and GCP.

• Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.

• Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.

• Certifications:

  • Required: AWS Certified Solutions Architect - Professional

  • Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect

Success Metrics

• 99.9% availability maintained for Tier-1 workloads.

• 100% coverage of DR automation for Tier-1 services.

• 25% annual increase in automated quality/test coverage.

• 15% annual improvement in resource efficiency and cost performance.

• Documented resilience participation across all enterprise architecture blueprints.

• Positive "technical peer readiness" and succession rating from Head of REO.

Summary Value Proposition

This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.

It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*

Position Summary:

Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.

Responsibilities include but not limited to:

• Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.

• Perform analysis, design, development, and integration on medium to high level complexity assignments.

• Develop and support automation capabilities through webservices and APIs.

• Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.

• Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.

• Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.

• Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.

• Document technical processes and contribute to knowledge sharing across the EPS team.

Qualifications:

• Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.

• 3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.

• Familiarity with SAP ICM/APM and ALM modules.

• Strong problem-solving skills and ability to manage multiple priorities.

• Excellent communication skills and ability to work cross-functionally.

• Experience with Agile methodologies and DevOps practices is a plus.

Preferred Qualifications:

• SAP Certification in relevant Modules

• Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices

• Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.

• Ability to work independently and as part of a collaborative team.

• Commitment to continuous learning and process improvement.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

Job Title : Principal Mechanical Design Engineer

Job Family : Mechanical Design Engineering

Organization : Data Center Infrastructure Team

Location : Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

• Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

• Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

• Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

• Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

• Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

• Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

• Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

• Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

• Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

• Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

• Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

• Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

• Lead mechanical design reviews and contribute to cross-functional design validation efforts.

• Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

• Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

• Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

• Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

• Conduct root cause analysis and corrective actions for mechanical failures or field issues.

• Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

• Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

• May perform other duties and responsibilities as assigned

How will you get here? 

Education :

• Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience :

• 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

• Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

• Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

• Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

• Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills

• Creative, self-motivated, accountable, and team-oriented

• Able to work independently with minimal oversight

• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

• Skilled in writing reports, business correspondence, and procedural guides

• Effective at presenting information and responding to management, clients, and public queries

• Capable of influencing others and sharing best practices

• Comfortable working as part of a global team

• Capable of assessing projects, articulating risks, and developing project milestones

• Familiar with stage-gate processes in project lifecycle management (PLCM)

• Able to mentor less experienced engineers

• Ability to travel both domestically and internationally up to 30%

Preferred Qualifications:  

• Master’s Degree in Mechanical Engineering

• Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

• Active Professional Engineer (PE) license.

• Knowledge of regulatory and safety standards applicable to data center infrastructure.

• Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus

Job Title : Principal Mechanical Design Engineer

Job Family : Mechanical Design Engineering

Organization : Data Center Infrastructure Team

Location : Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

• Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

• Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

• Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

• Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

• Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

• Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

• Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

• Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

• Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

• Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

• Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

• Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

• Lead mechanical design reviews and contribute to cross-functional design validation efforts.

• Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

• Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

• Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

• Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

• Conduct root cause analysis and corrective actions for mechanical failures or field issues.

• Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

• Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

• May perform other duties and responsibilities as assigned

How will you get here? 

Education :

• Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience :

• 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

• Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

• Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

• Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

• Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills

• Creative, self-motivated, accountable, and team-oriented

• Able to work independently with minimal oversight

• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

• Skilled in writing reports, business correspondence, and procedural guides

• Effective at presenting information and responding to management, clients, and public queries

• Capable of influencing others and sharing best practices

• Comfortable working as part of a global team

• Capable of assessing projects, articulating risks, and developing project milestones

• Familiar with stage-gate processes in project lifecycle management (PLCM)

• Able to mentor less experienced engineers

• Ability to travel both domestically and internationally up to 30%

Preferred Qualifications:  

• Master’s Degree in Mechanical Engineering

• Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

• Active Professional Engineer (PE) license.

• Knowledge of regulatory and safety standards applicable to data center infrastructure.

• Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus

JOB SUMMARY