Engineering Jobs in Independence Minnesota
5 positions found
Location: Plymouth MN 55441
Duration: 12 months
As a member of the Acute Therapies Verification and Validation engineering team, you would be responsible for supporting product verification, validation, and compliance test activities on electrical and mechanical medical device components/systems.
Your expertise will be applied to all levels of product development from component prototypes to final system design.
This will include developing, executing, and validating test methods/creating associated documentation. Interface with/support different groups, e.g., R&D, Project Management, Quality, and manufacturing.
Responsibilities include but not limited to:
* Under supervision, Develop/execute verification test methods, protocols, and reports for verification of requirements on components and systems
* Drive quality into product development through analysis, test, and timely feedback of test results back to team
* Under supervision, Design test cases to include test methodology, test setups, materials, equipment, procedure, and acceptance criteria based on requirement and standard
* Execute functional testing of mechanical assemblies, electrical circuits, and systems
* Support hardware team in product development, concept feasibility, pre compliance and change activities by developing test, collecting, and providing test data
* Under supervision, design hardware and/or software tools and fixtures used to execute test methods and analyze data
* Review, understand and characterize electrical/mechanical designs to develop test methods and ensure coverage of requirements
* Read/understand medical compliance standards and requirements, evaluate risk, and develop test procedures to ensure requirements are met
* Perform hands on test execution in the lab and at third party medical device test labs, communicate all defects/issues/failures during the test execution.
* Under supervision, develop and implement feasibility and characterization testing on designs
* Analyze test data for conformance to pre-determined acceptance criteria and record clearly results in testing platforms like ALM.
* Collaborate with System team to better understand requirements and improve test effectiveness.
* Actively participate in improving existing testing scenarios and test cases.
* Maintain laboratory equipment and inventory levels for laboratory supplies
* Perform troubleshooting, hands on rework and calibration of electromechanical Systems
What you'll bring
* Bachelor's degree in Engineering with 1+ years of experience
* Experience with system and component level electromechanical V&V testing, plans/procedures/reports, equipment, and test methods preferred
* Demonstrated results in both Troubleshooting/resourcefulness.
Use own expertise/guidance from others to identify/resolve critical issues.
Understanding/application of root cause analysis methods.
* Knowledge of electrical/mechanical engineering disciplines with ability to read, understand and analyze electrical schematics/ mechanical drawings.
* Experience using electrical/mechanical lab equipment. e.g., oscilloscope, DMM, power supply, force/pressure gauge, caliper, thermometer, flow meter and scales
* Takes a hands-on approach to testing, fault diagnosis and isolation
* Experience creating detailed, clear, and complete documentation and records
* Demonstrated experience collaboratively and effectively across disciplines/project teams
* Comfortable/effective in a fast-paced environment, where small teams share a broad variety of duties
Job Tittle: R&D Component Engineer
Duration: 06-month contract
Location : Maple Plain, MN
Your Responsibilities Will Include:
• Evaluating and approving parts to ensure compliance with requirements
• Inspect, analyse, potentially rework, review, test and disposition components to ensure functionality
• Perform both design and project tasks related to the inspection, testing, and production support of implantable orthopedic devices and associated non-implantable delivery instruments
• Assist in research and development of new components, assemblies, and processes to support product development and continuation activities
• Perform dimensional, strength of materials, mechanism movement, and/or manufacturability analysis
• Generate test methods and protocols, perform tests, analyze data, generate reports for product verification, and present findings as needed to cross-functional stakeholders
• Perform various product engineering tasks as necessary to support R&D and operations
• Communicate updates to the program manager and other various cross-functional team members as it relates to task completion and schedule adherence relative to overall business goals and objectives
• Evaluate and solve technical challenges either individually or as part of a team by: collaborating cross-functionally to troubleshoot issues and implement solutions; actively participating in problem solving sessions and/or brainstorming; systemically and logically working through issues using personal skills/experience and/or pulling in resources as needed; and designing and conducting experimental testing to appropriately characterize and evaluate solutions
• Participate in engineering meetings, technical working groups, and project management discussions
• Assist in the building, prototyping, modifying, and testing of engineering components
• Assist with prototyping, assembling, characterizing, validating inspection processes, rework instructions, and/or test methods
• Follow safety protocols, quality SOP's, and regulatory requirements in all tasks and activities
• Comply with applicable design-related standards published by external regulatory bodies
• Properly document activities in accordance with best engineering practices, company procedures, and regulatory requirements
• Perform other duties as needed and assigned
Minimum Qualifications
• Bachelor's degree in engineering (Mechanical, Manufacturing, Industrial, Biomedical, or technical equivalent) with 0-3 years of related work experience or an equivalent combination
• Hands-on experience in metrology and familiarity with metrological equipment
• Experience in the use of analytical methods including statistics, DOE, and associated SW tools (Minitab)
• Strong problem-solving skills, attention to detail, and the ability to work both independently and as a team
• Self-starter with proven ability to successfully work with minimal supervision
• Desire to learn and meaningfully contribute to the team
• Good teamwork and interpersonal skills
• Good written and verbal communication
• Ability to multitask, prioritize, and meet project deadlines with high attention to detail
Preferred Qualifications
• Hands-on experience with prototyping tools (3D printing, hand and/or power tools, manual and/or CNC machining, etc.), measurement tools (Keyence, Micro-Vu), and mechanical testing equipment
• Working knowledge of current CAD tools, SolidWorks experience preferred
• Experience working within an ISO certified or FDA registered work environment
• Familiarity with medical device quality systems and regulations
• Demonstrated cross-functional teamwork in technically demanding environment
• Strong bias for action and ability to shift as needed to support changing business needs
The R&D Component Engineer I will be a key member of the engineering team, partnering with representatives from R&D, Quality, Supply Chain, and Production.
This position is responsible for evaluating and dispositioning mechanical components used in the manufacturing scale up of Integrity Orthopaedic, Inc products.
The R&D Component Engineer I acts as the technical bridge between design, procurement, and manufacturing, ensuring every mechanical part that goes into the instruments will be functional, reliable, compliant, and cost-effective.
In all actions, the R&D Component Engineer I shall demonstrate a primary commitment to patient safety and product quality by maintaining compliance to the Quality Policy and all other documented processes and procedures.
Your Responsibilities Will Include: • Evaluating and approving parts to ensure compliance with requirements • Inspect, analyze, potentially rework, review, test and disposition components to ensure functionality • Perform both design and project tasks related to the inspection, testing, and production support of implantable orthopedic devices and associated non-implantable delivery instruments • Assist in research and development of new components, assemblies, and processes to support product development and continuation activities • Perform dimensional, strength of materials, mechanism movement, and/or manufacturability analysis • Generate test methods and protocols, perform tests, analyze data, generate reports for product verification, and present findings as needed to cross-functional stakeholders • Create and support documentation activities including, but not limited to: drawings and specifications for piece parts and assemblies; generate change orders to existing documents; review documentation generated by others related to product responsibilities; actively participate in design reviews; document the appropriate development and manufacturing practices per quality system or internal requirements; and verify all final design documentation, parts lists, and drawings to ensure compliance and accuracy • Perform various product engineering tasks as necessary to support R&D and operations • Communicate updates to the program manager and other various cross-functional team members as it relates to task completion and schedule adherence relative to overall business goals and objectives • Evaluate and solve technical challenges either individually or as part of a team by: collaborating cross-functionally to troubleshoot issues and implement solutions; actively participating in problem solving sessions and/or brainstorming; systemically and logically working through issues using personal skills/experience and/or pulling in resources as needed; and designing and conducting experimental testing to appropriately characterize and evaluate solutions • Participate in engineering meetings, technical working groups, and project management discussions • Assist in the building, prototyping, modifying, and testing of engineering components • Assist with prototyping, assembling, characterizing, validating inspection processes, rework instructions, and/or test methods • Follow safety protocols, quality SOP's, and regulatory requirements in all tasks and activities • Comply with applicable design-related standards published by external regulatory bodies • Properly document activities in accordance with best engineering practices, company procedures, and regulatory requirements • Perform other duties as needed and assigned Minimum Qualifications • Bachelor's degree in engineering (Mechanical, Manufacturing, Industrial, Biomedical, or technical equivalent) with 0-3 years of related work experience or an equivalent combination • Hands-on experience in metrology and familiarity with metrological equipment • Experience in the use of analytical methods including statistics, DOE, and associated SW tools (Minitab) • Strong problem-solving skills, attention to detail, and the ability to work both independently and as a team • Self-starter with proven ability to successfully work with minimal supervision • Desire to learn and meaningfully contribute to the team • Good teamwork and interpersonal skills • Good written and verbal communication • Ability to multitask, prioritize, and meet project deadlines with high attention to detail Preferred Qualifications • Hands-on experience with prototyping tools (3D printing, hand and/or power tools, manual and/or CNC machining, etc.), measurement tools (Keyence, Micro-Vu), and mechanical testing equipment • Working knowledge of current CAD tools, SolidWorks experience preferred • Experience working within an ISO certified or FDA registered work environment • Familiarity with medical device quality systems and regulations • Demonstrated cross-functional teamwork in technically demanding environment • Strong bias for action and ability to shift as needed to support changing business needs Other • Ability to lift up to 30 pounds • Must be able to wear clean room clothing and work in a cleanroom environment as needed Interview Process • Teams interview with hiring manager • Onsite tour of facility, meeting with some team members Top 3 Skills 1.
Inspection experience 2.
Qualification experience 3.
Evaluation for disposition for components experience Equipment • Laser scanning • Micro View Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
- 3:30 Pm Key Responsibilities: At least 1 year Experience with automated machinery, robotics, or custom equipment builds.
Technical diploma or equivalent experience in automation, mechatronics, machine building, or industrial maintenance.
Strong understanding of mechanical assembly, pneumatics, and basic electrical wiring.
Ability to read mechanical drawings, electrical schematics, and pneumatic diagrams.
Experience using hand tools, measurement tools, and shop equipment.
Equipment Assembly & Build Assemble mechanical components, frames, fixtures, subassemblies, and robotic systems according to engineering drawings and build documentation.
Perform precision alignment of mechanical parts such as actuators, slides, sensors, and tooling.
Install pneumatic systems, tubing, valves, and fittings.
Electrical & Controls Integration Wire control panels, sensors, motors, and power systems following electrical schematics.
Route cables and harnesses for neat, serviceable installations.
Assist controls engineers with I/O checkout, machine debugging, and troubleshooting.
Machine Testing & Validation Support mechanical dry runs, functional testing, and system verification.
Identify issues during startup and collaborate with engineering to resolve mechanical, electrical, pneumatic, or programming problems.
Perform basic robot or PLC adjustments under guidance from controls engineers.
Documentation & Continuous Improvement Maintain accurate build notes, redlines, and change feedback for engineering updates.
Follow standard work procedures, safety guidelines, and quality processes.
Suggest improvements in machine design, build methods, and component selection.
Collaboration Work closely with mechanical designers, controls engineers, project managers, and manufacturing teams.
Support field installation, commissioning, or service visits as required.
Preferred: Experience with automated machinery, robotics, or custom equipment builds.
Familiarity with PLCs, HMIs, and robotic systems (e.g., FANUC, ABB, Mitsubishi).
Understanding of industrial safety standards such as lockout/tagout, guarding, and risk assessment.
