Jobs in Hayward, CA
673 positions found — Page 32
Border Patrol Agent (BPA)
- Experienced (GL-9 GS-11) NEW RECRUITMENT AND RETENTION INCENTIVES! Check out these higher-salaried federal law enforcement opportunities with the U.S.
Customs and Border Protection.
Your current or prior law enforcement experience may qualify you for this career opportunity with the nation's premier federal agency charged with securing our borders and protecting our country.
You may qualify for these higher-graded Border Patrol Agent (BPA) employment opportunities if you have current or prior law enforcement experience.
This experience could have been gained as part of a military police assignment or as a member of a state or local law enforcement organization.
Look at the duties and responsibilities section below to see if you are interested in these federal law enforcement opportunities and review the qualifications section below to see if you are qualified.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S.
Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences.
Relocation may be required.
The U.S.
Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.
If you seek an exciting and rewarding job that provides excellent pay and exceptional federal benefits, now is the time to make your move.
U.S.
Customs and Border Protection (CBP) is hiring immediately for these full-time, career Law Enforcement Officer (LEO) opportunities.
Salary and Benefits: Salary for newly appointed law enforcement Border Patrol Agents varies from: Base Salary: GL-9/GS-11 $63,148
- $120,145 per year Locality Pay: Varies by duty location.
Overtime Pay: Up to 25% Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others.
A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014.
This is a career ladder position with a grade level progression from GL-9 to GS-11 to GS-12.
You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in the lower grade level.
All Border Patrol Agents may select from an array of federal employment benefits that include health and insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan that is similar to traditional and ROTH 401(k) offerings.
*Recruitment Incentive
* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive.
The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location.
Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.
*Retention Incentive
* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duties and Responsibilities: As a BPA, you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.
Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include: Detecting and questioning people suspected of violating immigration and customs laws and inspecting documents and possessions to determine citizenship or violations.
Preventing and apprehending aliens and smugglers of aliens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations.
Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband.
Performing farm checks, building checks, traffic checks, city patrols, and transportation checks.
Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications: GL-9: You qualify for the GL-9 grade level if you possess one (1) year of specialized experience, equivalent to at least the next lower grade level, performing duties such as: Performing physical searches of detained individuals, their vehicles, and their immediate surroundings for weapons, contraband, currency, and other evidence.
Apprehending, physically restraining, or working with law enforcement officials to identify or apprehend violators of state, federal, or immigration laws.
Proficient in the use of firearms, preparing investigative reports, serving court orders (e.g., warrants, subpoenas, etc.), and gathering evidence for criminal cases prosecuted through the court system.
If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GS-11 grade level.
GS-11: You qualify for the GS-11 grade level if you possess one year of specialized experience equivalent to at least the next lower grade level, with the authority granted by the state or government to enforce laws, make arrests, and investigate crimes, performing primary duties in an official law enforcement capacity such as: Utilizing intelligence information to track illegal operations, criminal activity, threats to our nation, and/or contraband while serving as a state, federal, or military law enforcement official.
Leading investigations of fraud, contraband, criminal activity, threats to our nation, and/or illegal operations to determine sources and patterns while serving as a state, federal, or military law enforcement official.
Apprehending violators of state, federal, or immigration laws by utilizing various forms of complex technology that include surveillance, detection, situation awareness systems, and/or communications equipment.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
There are no education substitutions for the GL-9 or GS-11 grade-level Border Patrol Agent opportunities.
Other Requirements: Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (including protectorates as declared under international law) for at least three of the last five years.
Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference : You may also be eligible for an excepted service Veterans' Recruitment Appointment (VRA).
The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training : After you are hired, you will be detailed to the U.S.
Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement, and USBP-specific operations, driver training, physical techniques, firearms, and other courses.
Border Patrol work requires the ability to speak and read Spanish, as well as English.
Border Patrol Agents will be provided training to become proficient in the Spanish language at the Academy.
How to Apply: Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest, select Border Patrol Agent, and then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.
You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process, contact a recruiter through the U.S.
Border Patrol page: /s/usbp.
NOTE: As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Examines customer vehicles.
Identifies necessary vehicle repairs and maintenance.
Estimates cost of repairs.
Performs vehicle repairs and maintenance.
Documents services performed.
Performs services efficiently and according to dealership guidelines.
Follows dealership and manufacturer service guidelines.
Requests necessary parts.
Effectively utilizes available technologies to enhance customer experience.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: o up to 3 years o 3-5 years √ 5+ years Education/Experience: Thorough knowledge of automotive parts and systems.
Demonstrable mechanical skills and knowledge.
Technical training or commensurate technical experience required.
Certificates and Licenses: √ Valid Driver’s License √ Certified/senior technician with respective manufacturer.
√ State inspection/emissions license required by State.
√ All required manufacturer fundamental training and/or NAPA training provided by HAG.
√ Meets and/or exceeds manufacturer requirements for ASE tests.
√ Completed manufacturer training to perform: warranty repairs/recalls on most vehicles, PDI’s, maintenance, and minor repairs.
Computer Skills: Basic Computer skills to utilize timekeeping system.
Ability to learn parts department computer inventory and ordering system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to (50) pounds.
While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Environment Demands: Duties are performed primarily in the service area.
Work includes movement around vehicles, working in various physical positions, and the safe operation of power tools and test equipment.
May be exposed to loud noise, vibration, exhaust fumes, and other service and repair conditions.
Frequently interacts with customers, service advisors and the service manager.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
The Technician Position has a Pay Scale consisting of the following elements and ranges.
Wages include Base Hourly Compensation of $33.80
- $55.00 .
The position also may also pay a production bonus based on individual or team performance that may range from $0.00 (if baseline benchmarks are not met) without any fixed upper limit.
Please click here to view the CPRA Job Applicant Privacy Notice: CPRA Job Applicant Privacy Notice Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Salary: $100,000
- $125,000 per year A bit about us: This company is a specialty metal fabrication and processing firm serving industrial and manufacturing clients.
They focus on providing high-quality custom metal solutions, including cutting, forming, and finishing services.
Their operations emphasize precision, efficiency, and meeting strict client specifications.
With experience across multiple industries, they support both large-scale production and specialized, small-batch projects.
Why join us? Medical, dental, and vision insurance 401(k) retirement plan with employer matching Paid time off and holidays Life insurance coverage Job Details As the Cutting & Inventory Manager, you will oversee both the Cutting and Inventory departments while providing operational support for the Laser and NC Punch departments.
Your primary goal for Cutting is to maximize output of quality parts with the least personnel required, while for Inventory you ensure accuracy and timely delivery of all materials and finished goods.
In addition, you will support Laser and NC Punch operations as needed, including machine setup, program verification, and adherence to quality standards.
You will advise management on process improvements, equipment needs, and workflow optimizations, while ensuring your teams operate efficiently, safely, and in compliance with company protocols.
RESPONSIBILITIES – CUTTING: Manage workload and balance machine loads to maximize operator-free uptime Ensure equipment is maintained, properly tooled, and escalate unresolved issues Produce high-quality parts on time and track productivity targets Assist other departments when needed to maintain workflow continuity RESPONSIBILITIES – INVENTORY: Maintain accurate inventory for raw materials, hardware, and finished goods Ensure proper transaction of inventory across all locations, physical and electronic Perform cycle counts, audits, and identify process weaknesses Kit parts as needed and verify correctness with required checklists Deploy inventory team to maximize output without sacrificing accuracy Track airport monitors and expedite components to meet production schedules Maintain a clean and organized inventory storage area RESPONSIBILITIES – LASER AND NC PUNCH SUPPORT: Operate or assist with Amada, Mazak, Mitsubishi lasers, and Amada EMK/ACIES NC punches as needed Setup machines, verify programs, and produce parts to meet quality standards Follow setup sheets and contribute to generating or revising them Use inspection equipment such as calipers, height gauges, and laser inspection systems Track ERP job entries accurately and assist other departments when workloads demand QUALIFICATIONS AND SKILLS REQUIRED: 5+ years supervising Cutting, Punch, Laser, Waterjet, or Inventory departments 3+ years hands-on experience with lasers and NC punches preferred Must be able to read and follow blueprints/drawings Strong ERP and QDB skills Ability to enforce company quality protocols across multiple departments Physical ability to lift and carry 25 lbs repeatedly Strong problem-solving, leadership, and multitasking skills Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $20
- $30 per hour A bit about us: Founded over seven decades ago, we are a global leader in designing and manufacturing industrial food processing and packaging equipment.
We build customized production lines (from frying and baking systems to conveyors and inspection technology) that help major food brands produce safe, consistent, and high-quality products efficiently.
Why join us? Competitive Compensation: Excellent hourly pay (DOE) 401(k) Comprehensive Benefits: Medical, Dental, Vision, Life Insurance Generous PTO, Paid Holidays, Sick Time, and Your Birthday Off Stable, Established Employer with Long-Term Customer Relationships Hands-On, High-Mix Manufacturing Environment (lasers, waterjets, mills, lathes, press brakes) Opportunity to Work Closely with Engineering and Production to Improve Manufacturability Job Details Key Responsibilities and Duties: Review engineering drawings for manufacturability and provide feedback as needed Create, release, and revise flat pattern drawings to support production Program CNC manufacturing equipment, including: – Fiber laser – Waterjet – Lathe – Mill Create and update documentation and work instructions for current manufacturing practices Support production by 3D modeling fixtures and tooling as needed Collaborate with production and design engineering to resolve manufacturability and production issues Use CAD/CAM software (e.g., MasterCAM, Autodesk Inventor, AutoCAD, nesting tools) to drive accurate and efficient manufacturing Work hands-on with sheet metal and related machinery (welders, mills, lathes, lasers, water jets, punches, measuring tools, robotics, etc.) Ensure parts meet quality requirements and dimensional specifications Qualifications Needed: Education: High school diploma or GED required; technical/vocational training in manufacturing, machining, or related field preferred Experience: Hands-on experience with manufacturing equipment and CAD/CAM software, preferably MasterCAM Experience with manufacturing machinery such as lasers, water jets, plasma, milling machines, lathes, drill presses, and press brakes Experience or strong background in: CAD/CAM software such as Autodesk Inventor, AutoCAD, Sigma Nest, Tru-Tops, Boost, SPI Sheet Metal, and/or MasterCAM Visualizing space geometry and performing 3D-to-flat conversions for sheet metal Working with sheet metal and machinery (welding equipment, milling and lathe machines, laser, water jet, punch, measuring tools, robotics, etc.) Proven ability to: Read and interpret engineering drawings and translate them into manufacturable programs and flat patterns Communicate effectively between production and design engineering Create and maintain clear manufacturing documentation and procedures Additional Requirements: Strong mechanical aptitude and “hands-on” mindset Ability to work on-site in a production/manufacturing environment Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
About Muro AI
Muro AI is transforming how the $2T construction industry plans and builds. Founded by Cornell alumni, ex-founders, and former McKinsey operators, we’re building AI agents that automate the most complex, manual, and costly phase of construction: preconstruction.
We move fast, build with conviction, and obsess over delivering real impact to the people who build our world. If you want to shape how the next century of construction gets built, this is where it starts.
About The Opportunity
As our Founding Account Executive, you’ll drive Muro’s growth from founder-led sales to a scalable GTM engine. You’ll own deals end-to-end — from discovery to close — working with the founders to define our ICP, refine messaging, and make “Muro it” a phrase known across the construction world.
Location: San Francisco (preferred) open to Remote; approximately 30% travel
Why it matters:
- Shape a category. No one owns “pre-con AI” yet - we’re charting that map
- Bridge two worlds. We’re redefining how construction meets AI — you’ll bridge human expertise with AI automation to transform how the industry works
- Drive impact. Every deal you close helps bring automation to an industry that still runs on spreadsheets
What You’ll Do
- Own the full sales cycle - from prospecting and pipeline generation to negotiation, close, and onboarding - across mid-market and enterprise clients (typically $50K+ ACV)
- Build and run multi-threaded sales campaigns engaging both operational leaders (Preconstruction Directors, Estimators) and C-suite executives
- Conduct deep discovery to understand client workflows, pain points, and ROI opportunities, translating them into tailored solutions and measurable outcomes
- Deliver compelling demos and proposals, connecting Muro’s AI capabilities to tangible preconstruction efficiency and cost savings
- Collaborate closely with founders to refine ICP, messaging, and pricing, and to build scalable sales playbooks and processes
- Represent Muro at key industry events and conferences to drive awareness, pipeline growth, and category leadership in “Pre-Con AI.”
- Partner cross-functionally with Product and Engineering to relay customer insights, shape new use cases, and influence the product roadmap
Basic Qualifications
- 2+ years of full-cycle closing experience in SaaS or fast-growing startups
- Proven track record of exceeding quota, closing $50K–$100K+ ARR deals
- Skilled in solution selling - you focus on outcomes and ROI, not features, and can tailor value to each customer’s workflow and priorities
- Strong communicator and storyteller — able to make complex AI or workflow products simple and compelling
- Highly organized and detail-oriented, with disciplined CRM hygiene (HubSpot experience a plus)
- Coachable, curious, and driven to grow in a fast-paced, early-stage environment
- Thrives in high-ownership, ambiguous settings and knows how to create structure where none exists
Preferred Qualifications
- Experience selling SaaS or AI solutions; selling to General Contractors or within the construction industry is a plus
- Proven ability to manage complex, high-value sales cycles (>$100K contracts)
- Strong understanding of construction workflows and buyer dynamics in preconstruction or operations
- Experience engaging with senior decision-makers and representing the company at industry events, trade shows, or conferences
- Familiarity with modern outbound tools such as Lemlist, Clay, and LinkedIn Sales Navigator
What You'll Get
- Ownership & Impact: Play a pivotal role in shaping how the construction industry adopts AI — your work will directly influence our growth and success.
- Speed & Urgency: We move fast and operate with high ownership — we raise the bar for ourselves and each other every day.
- Competitive compensation with a top-of-market base, uncapped commission, and benefits
- Growth Environment: Continuous learning, mentorship, and clear paths to advance as we scale our GTM team
Join the fastest growing outpatient radiology practice in the Nation- SimonMed Imaging! Our commitment to excellence and improving patient care paired with the best in class technology allows us to be an industry leader in the constantly evolving health care environment. Secure your spot now and take advantage of a unique career opportunity to advance your skills while working alongside a dedicated team of board-certified subspecialty radiologists. We can’t wait to meet you!
Job Overview
- We are seeking a skilled and compassionate X-ray Technologist to join our outpatient imaging team. The ideal candidate will perform diagnostic radiographic procedures with precision, accuracy, and attention to patient comfort. As part of a multidisciplinary team, the technologist will contribute to patient care by producing high-quality images that aid in diagnosis and treatment planning.
Key Responsibilities
- Perform high-quality diagnostic X-ray exams as prescribed by physicians
- Prepare and position patients accurately to achieve optimal imaging results
- Ensure patient safety and comfort throughout the imaging process
- Operate and maintain X-ray equipment, ensuring proper calibration and functionality
- Review images for quality assurance and follow protocols for image storage
- Adhere to established radiation safety standards and infection control guidelines
- Document patient information accurately and complete reports as required
- Collaborate with other radiology and healthcare professionals to support optimal patient care
- Maintain knowledge of advancements in radiologic technology and imaging techniques
Qualifications
- Certification: ARRT (American Registry of Radiologic Technologists) certification in
- Radiography required
- Licensure: Current state licensure as required by law
- Education: Associate's degree in Radiologic Technology or equivalent from an accredited program
- Experience: Minimum of 1-2 years of experience as an X-ray Technologist, preferably in an outpatient or clinical setting
Skills and Competencies
- Strong knowledge of radiologic procedures, anatomy, and patient positioning
- Proficiency with imaging software and radiologic equipment
- Excellent interpersonal and communication skills, with a patient-centered approach
- Ability to work effectively in a fast-paced environment and handle multiple priorities
- Detail-oriented with strong organizational skills
- Commitment to maintaining patient confidentiality and professionalism at all times
Preferred Qualifications
- Experience in outpatient or ambulatory care setting
- BLS (Basic Life Support) certification
- Knowledge of additional imaging modalities (e.g., CT, MRI) is a plus
Benefits
- Your health, happiness and future matters! At SimonMed Imaging, we offer medical, vision and dental insurance, 401(k) eligibility, paid holidays plus PTO, Sick Time, opportunity for growth, and much more!
Join the fastest growing outpatient radiology practice in the Nation- SimonMed Imaging! Our commitment to excellence and improving patient care paired with the best in class technology allows us to be an industry leader in the constantly evolving health care environment. Secure your spot now and take advantage of a unique career opportunity to advance your skills while working alongside a dedicated team of board-certified subspecialty radiologists. We can’t wait to meet you!
Job Overview
- We are seeking a skilled and compassionate X-ray Technologist to join our outpatient imaging team. The ideal candidate will perform diagnostic radiographic procedures with precision, accuracy, and attention to patient comfort. As part of a multidisciplinary team, the technologist will contribute to patient care by producing high-quality images that aid in diagnosis and treatment planning.
Key Responsibilities
- Perform high-quality diagnostic X-ray exams as prescribed by physicians
- Prepare and position patients accurately to achieve optimal imaging results
- Ensure patient safety and comfort throughout the imaging process
- Operate and maintain X-ray equipment, ensuring proper calibration and functionality
- Review images for quality assurance and follow protocols for image storage
- Adhere to established radiation safety standards and infection control guidelines
- Document patient information accurately and complete reports as required
- Collaborate with other radiology and healthcare professionals to support optimal patient care
- Maintain knowledge of advancements in radiologic technology and imaging techniques
Qualifications
- Certification: ARRT (American Registry of Radiologic Technologists) certification in
- Radiography required
- Licensure: Current state licensure as required by law
- Education: Associate's degree in Radiologic Technology or equivalent from an accredited program
- Experience: Minimum of 1-2 years of experience as an X-ray Technologist, preferably in an outpatient or clinical setting
Skills and Competencies
- Strong knowledge of radiologic procedures, anatomy, and patient positioning
- Proficiency with imaging software and radiologic equipment
- Excellent interpersonal and communication skills, with a patient-centered approach
- Ability to work effectively in a fast-paced environment and handle multiple priorities
- Detail-oriented with strong organizational skills
- Commitment to maintaining patient confidentiality and professionalism at all times
Preferred Qualifications
- Experience in outpatient or ambulatory care setting
- BLS (Basic Life Support) certification
- Knowledge of additional imaging modalities (e.g., CT, MRI) is a plus
Benefits
- Your health, happiness and future matters! At SimonMed Imaging, we offer medical, vision and dental insurance, 401(k) eligibility, paid holidays plus PTO, Sick Time, opportunity for growth, and much more!
Currently offering a $10,000 retention bonus paid out over two years.
Tool allowance included to support your trade.
Our Diesel Mechanics start at $40.00 – $42.00/hour depending on experience!
401K with 2% automatic company contribution plus company match up to an additional 6%.
Medical Benefits Start Day One!
We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage.
Paid vacation time, sick, and personal time.
Employee uniforms provided.
Strong Safety Culture, newer equipment, and excellent local leadership.
Schedule:
Sunday thru Thursday with a 5:00pm start time
ESSENTIAL DUTIES AND RESPONSIBILITIES
Independently troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).
Perform preventative maintenance within DOT standards.
Mentor other maintenance shop personnel.
Receive road calls, assign third party vendor, and work with business partners to triage appropriate plan of action including equipment swaps etc.
Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.
Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.
Other duties as assigned by manager.
SUPERVISION:
N/A
RELATIONSHIPS
Internal: All Fleet Technicians, Drivers, Coordinators and Manager
External: Dealer Service Managers
WORK ENVIRONMENT
Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.
MINIMUM QUALIFICATIONS
Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.
Diagnostic and troubleshooting ability using fleet maintenance software.
Successfully demonstrated independent analytical and problem-solving skills.
Must furnish own personal hand tools.
Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.
Ability to read and understand technical and service manuals.
Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.
Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.
Ability to adapt to changing organizational and operational needs.
Computer and software experience.
EDUCATION
High school diploma or equivalent required.
CERTIFICATIONS/TRAINING
Brake certification
LICENSES
Must possess a valid driver's license.
PREFERRED QUALIFICATIONS
JPRO software experience.
Welding ability
Knowledge with electrical schematics
Basic Microsoft Excel and Word skills.
Leadership experience or qualifications
Valid Class A CDL license and DOT certification
EPA 608 (Type 2 or Universal) certification
PHYSICAL QUALIFICATIONS
OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER
JOB REQUIRES WORKER TO:
FREQUENCY:
STAND: CONTINUOUSLY
WALK: CONTINUOUSLY
DRIVE VEHICLE: FREQUENTLY
SIT: FREQUENTLY
LIFT
1-10 lbs (Sedentary): FREQUENTLY
11-20 lbs (Light): FREQUENTLY
21-50 lbs (Medium): FREQUENTLY
51-100 lbs (Heavy): FREQUENTLY
Over 100 lbs (Very Heavy): OCCASIONALLY
CARRY
1-10 lbs (Sedentary): FREQUENTLY
11-20 lbs (Light): FREQUENTLY
21-50 lbs (Medium): FREQUENTLY
51-100 lbs (Heavy): FREQUENTLY
Over 100 lbs (Very Heavy): FREQUENTLY
PUSH/PULL 1: FREQUENTLY
CLIMB/BALANCE 2: FREQUENTLY
STOOP/SQUAT: FREQUENTLY
KNEEL: FREQUENTLY
BEND: FREQUENTLY
REACH ABOVE SHOULDER: FREQUENTLY
TWIST: FREQUENTLY
GRASP OBJECTS 3: FREQUENTLY
MANIPULATE OBJECTS 4: FREQUENTLY
MANUAL DEXTERITY 5: FREQUENTLY
1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)
2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)
3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)
4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)
5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)
Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $40-$42 per hour.
This role will also receive overtime compensation
Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.
Currently offering a $10,000 retention bonus paid out over two years.
Tool allowance included to support your trade.
Our Diesel Mechanics start at $40.00 – $42.00/hour depending on experience!
401K with 2% automatic company contribution plus company match up to an additional 6%.
Medical Benefits Start Day One!
We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage.
Paid vacation time, sick, and personal time.
Employee uniforms provided.
Strong Safety Culture, newer equipment, and excellent local leadership.
Schedule:
Sunday thru Thursday with a 5:00pm start time
ESSENTIAL DUTIES AND RESPONSIBILITIES
Independently troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).
Perform preventative maintenance within DOT standards.
Mentor other maintenance shop personnel.
Receive road calls, assign third party vendor, and work with business partners to triage appropriate plan of action including equipment swaps etc.
Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.
Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.
Other duties as assigned by manager.
SUPERVISION:
N/A
RELATIONSHIPS
Internal: All Fleet Technicians, Drivers, Coordinators and Manager
External: Dealer Service Managers
WORK ENVIRONMENT
Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.
MINIMUM QUALIFICATIONS
Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.
Diagnostic and troubleshooting ability using fleet maintenance software.
Successfully demonstrated independent analytical and problem-solving skills.
Must furnish own personal hand tools.
Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.
Ability to read and understand technical and service manuals.
Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.
Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.
Ability to adapt to changing organizational and operational needs.
Computer and software experience.
EDUCATION
High school diploma or equivalent required.
CERTIFICATIONS/TRAINING
Brake certification
LICENSES
Must possess a valid driver's license.
PREFERRED QUALIFICATIONS
JPRO software experience.
Welding ability
Knowledge with electrical schematics
Basic Microsoft Excel and Word skills.
Leadership experience or qualifications
Valid Class A CDL license and DOT certification
EPA 608 (Type 2 or Universal) certification
PHYSICAL QUALIFICATIONS
OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER
JOB REQUIRES WORKER TO:
FREQUENCY:
STAND: CONTINUOUSLY
WALK: CONTINUOUSLY
DRIVE VEHICLE: FREQUENTLY
SIT: FREQUENTLY
LIFT
1-10 lbs (Sedentary): FREQUENTLY
11-20 lbs (Light): FREQUENTLY
21-50 lbs (Medium): FREQUENTLY
51-100 lbs (Heavy): FREQUENTLY
Over 100 lbs (Very Heavy): OCCASIONALLY
CARRY
1-10 lbs (Sedentary): FREQUENTLY
11-20 lbs (Light): FREQUENTLY
21-50 lbs (Medium): FREQUENTLY
51-100 lbs (Heavy): FREQUENTLY
Over 100 lbs (Very Heavy): FREQUENTLY
PUSH/PULL 1: FREQUENTLY
CLIMB/BALANCE 2: FREQUENTLY
STOOP/SQUAT: FREQUENTLY
KNEEL: FREQUENTLY
BEND: FREQUENTLY
REACH ABOVE SHOULDER: FREQUENTLY
TWIST: FREQUENTLY
GRASP OBJECTS 3: FREQUENTLY
MANIPULATE OBJECTS 4: FREQUENTLY
MANUAL DEXTERITY 5: FREQUENTLY
1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)
2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)
3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)
4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)
5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)
Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $40-$42 per hour.
This role will also receive overtime compensation
Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.
Currently offering a $10,000 retention bonus paid out over two years.
Tool allowance included to support your trade.
Our Diesel Mechanics start at $40.00 – $42.00/hour depending on experience!
401K with 2% automatic company contribution plus company match up to an additional 6%.
Medical Benefits Start Day One!
We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage.
Paid vacation time, sick, and personal time.
Employee uniforms provided.
Strong Safety Culture, newer equipment, and excellent local leadership.
Schedule:
Sunday thru Thursday with a 5:00pm start time
ESSENTIAL DUTIES AND RESPONSIBILITIES
Independently troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).
Perform preventative maintenance within DOT standards.
Mentor other maintenance shop personnel.
Receive road calls, assign third party vendor, and work with business partners to triage appropriate plan of action including equipment swaps etc.
Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.
Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.
Other duties as assigned by manager.
SUPERVISION:
N/A
RELATIONSHIPS
Internal: All Fleet Technicians, Drivers, Coordinators and Manager
External: Dealer Service Managers
WORK ENVIRONMENT
Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.
MINIMUM QUALIFICATIONS
Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.
Diagnostic and troubleshooting ability using fleet maintenance software.
Successfully demonstrated independent analytical and problem-solving skills.
Must furnish own personal hand tools.
Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.
Ability to read and understand technical and service manuals.
Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.
Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.
Ability to adapt to changing organizational and operational needs.
Computer and software experience.
EDUCATION
High school diploma or equivalent required.
CERTIFICATIONS/TRAINING
Brake certification
LICENSES
Must possess a valid driver's license.
PREFERRED QUALIFICATIONS
JPRO software experience.
Welding ability
Knowledge with electrical schematics
Basic Microsoft Excel and Word skills.
Leadership experience or qualifications
Valid Class A CDL license and DOT certification
EPA 608 (Type 2 or Universal) certification
PHYSICAL QUALIFICATIONS
OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER
JOB REQUIRES WORKER TO:
FREQUENCY:
STAND: CONTINUOUSLY
WALK: CONTINUOUSLY
DRIVE VEHICLE: FREQUENTLY
SIT: FREQUENTLY
LIFT
1-10 lbs (Sedentary): FREQUENTLY
11-20 lbs (Light): FREQUENTLY
21-50 lbs (Medium): FREQUENTLY
51-100 lbs (Heavy): FREQUENTLY
Over 100 lbs (Very Heavy): OCCASIONALLY
CARRY
1-10 lbs (Sedentary): FREQUENTLY
11-20 lbs (Light): FREQUENTLY
21-50 lbs (Medium): FREQUENTLY
51-100 lbs (Heavy): FREQUENTLY
Over 100 lbs (Very Heavy): FREQUENTLY
PUSH/PULL 1: FREQUENTLY
CLIMB/BALANCE 2: FREQUENTLY
STOOP/SQUAT: FREQUENTLY
KNEEL: FREQUENTLY
BEND: FREQUENTLY
REACH ABOVE SHOULDER: FREQUENTLY
TWIST: FREQUENTLY
GRASP OBJECTS 3: FREQUENTLY
MANIPULATE OBJECTS 4: FREQUENTLY
MANUAL DEXTERITY 5: FREQUENTLY
1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)
2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)
3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)
4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)
5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)
Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $40-$42 per hour.
This role will also receive overtime compensation
Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.
Currently offering a $10,000 retention bonus paid out over two years.
Tool allowance included to support your trade.
Our Diesel Mechanics start at $40.00 – $42.00/hour depending on experience!
401K with 2% automatic company contribution plus company match up to an additional 6%.
Medical Benefits Start Day One!
We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage.
Paid vacation time, sick, and personal time.
Employee uniforms provided.
Strong Safety Culture, newer equipment, and excellent local leadership.
Schedule:
Sunday thru Thursday with a 5:00pm start time
ESSENTIAL DUTIES AND RESPONSIBILITIES
Independently troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).
Perform preventative maintenance within DOT standards.
Mentor other maintenance shop personnel.
Receive road calls, assign third party vendor, and work with business partners to triage appropriate plan of action including equipment swaps etc.
Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.
Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.
Other duties as assigned by manager.
SUPERVISION:
N/A
RELATIONSHIPS
Internal: All Fleet Technicians, Drivers, Coordinators and Manager
External: Dealer Service Managers
WORK ENVIRONMENT
Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.
MINIMUM QUALIFICATIONS
Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.
Diagnostic and troubleshooting ability using fleet maintenance software.
Successfully demonstrated independent analytical and problem-solving skills.
Must furnish own personal hand tools.
Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.
Ability to read and understand technical and service manuals.
Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.
Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.
Ability to adapt to changing organizational and operational needs.
Computer and software experience.
EDUCATION
High school diploma or equivalent required.
CERTIFICATIONS/TRAINING
Brake certification
LICENSES
Must possess a valid driver's license.
PREFERRED QUALIFICATIONS
JPRO software experience.
Welding ability
Knowledge with electrical schematics
Basic Microsoft Excel and Word skills.
Leadership experience or qualifications
Valid Class A CDL license and DOT certification
EPA 608 (Type 2 or Universal) certification
PHYSICAL QUALIFICATIONS
OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER
JOB REQUIRES WORKER TO:
FREQUENCY:
STAND: CONTINUOUSLY
WALK: CONTINUOUSLY
DRIVE VEHICLE: FREQUENTLY
SIT: FREQUENTLY
LIFT
1-10 lbs (Sedentary): FREQUENTLY
11-20 lbs (Light): FREQUENTLY
21-50 lbs (Medium): FREQUENTLY
51-100 lbs (Heavy): FREQUENTLY
Over 100 lbs (Very Heavy): OCCASIONALLY
CARRY
1-10 lbs (Sedentary): FREQUENTLY
11-20 lbs (Light): FREQUENTLY
21-50 lbs (Medium): FREQUENTLY
51-100 lbs (Heavy): FREQUENTLY
Over 100 lbs (Very Heavy): FREQUENTLY
PUSH/PULL 1: FREQUENTLY
CLIMB/BALANCE 2: FREQUENTLY
STOOP/SQUAT: FREQUENTLY
KNEEL: FREQUENTLY
BEND: FREQUENTLY
REACH ABOVE SHOULDER: FREQUENTLY
TWIST: FREQUENTLY
GRASP OBJECTS 3: FREQUENTLY
MANIPULATE OBJECTS 4: FREQUENTLY
MANUAL DEXTERITY 5: FREQUENTLY
1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)
2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)
3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)
4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)
5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)
Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $40-$42 per hour.
This role will also receive overtime compensation
Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.
Registered Veterinary Technician or Senior Veterinary Assistant - Critical Care – Overnight Shift
Pay range: RVT $30 - $40 /hr VA $26- $34/hr
About SAGE Dublin:
SAGE Dublin specializes in many areas of Veterinary Medicine using the most current knowledge and treatments available to ensure the highest standards of care for our patients. Our Dublin facility features state-of-the-art diagnostic equipment and surgical tools, and we pride ourselves on providing the highest standards of care. In addition to Critical Care we also offer services for Emergency, Surgery, Oncology, and Internal Medicine.
We work as a team and foster a positive culture in a training environment that drives inclusiveness and camaraderie. Being a part of the Dublin team provides you with opportunities to expand your horizons and practice at the top of your license or skillset.
Who you are:
We are looking for an experienced Critical Care Technician to join our Overnight Shift: Wednesday-Saturday (9pm-7am)!
You will be the ‘right hand’ to our veterinarians on-staff, the helping hands we need to maintain the highest level of care and comfort for our clients’ beloved pets. You are dedicated and passionate about enhancing lives through superior pet care. You thrive in a fast-paced environment which fosters your growth and supports your development to help you achieve your greatest potential. But most of all, you enjoy working with animals and their people!
Work Schedule:
- 4/10 schedule Wednesday-Saturday 9pm-7am
- Overnight shift differential: $5.50/hr after 6PM
Some of the responsibilities you will own in this role:
- Perform nursing care for critical cases, consistently evaluating the patient
- Calculating CRI's and providing advanced hospitalization care
- Perform in house laboratories
- Proficient in IV catheter placement
- Give accurate and detailed patient rounds
- Perform safe restraint for fractious and frightened patients
- Obtain TPR's, keep medical records, understand when to alert DVM
- Advocate for the patient and client
- High school diploma
- 2+ years of clinical experience in the veterinary industry
- Strong interpersonal skills to effectively interface with staff and clients using tact, patience, professional courtesy, and exhibit confidentiality and discretion where appropriate
- An active CA state RVT license is preferred but not required
- Full-time benefits include health, dental, vision, disability and life insurances, flex-spending accounts, 401(k), Employee Assistance Program, 3 weeks accrued paid time off, and uniforms
Ethos Veterinary Health is at the forefront of innovation and world-class medicine. As the premier network of over 140 specialty and emergency hospitals across North America, Ethos brings together a dedicated community of more than 1,500 specialized doctors providing care for nearly 2 million pets annually. The integrated and collaborative network of veterinary professionals utilize state-of-the-art technology and a scientific, evidence-based approach to deliver compassionate, unparalleled care and rewarding careers. Committed to revolutionizing veterinary medicine, Ethos sets the standard in veterinary excellence. Discover more at .
Ethos Veterinary Health offers a comprehensive benefits program including medical, dental, vision, a 401k with employer match, and paid time off (including sick time) for all eligible employees. The team can provide more information about compensation and benefits for your specific location during the process. For positions based in Colorado, Ethos provides eligible employees with paid sick and safe leave and public health emergency leave in accordance with the requirements of Colorado's Healthy Families and Workplaces Act.
Ethos is an Equal Opportunity Employer. Ethos does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided based on qualifications, competence, merit, and business need. PM19
Powered by JazzHR
Compensation details: 25-40 Hourly Wage
PIf469d46f2f92-3631
Benefits include: Company Paid Sick Time, Paid Vacation Time, Paid Holidays, Bereavement Pay, Jury Duty Pay, Contest Prize Awards, 401K Plan with Company Match, Medical/Dental/Vision Plans, Employee Assistance Program, 30% Merchandise Discount, College Scholarship Award.
All Bonuses, Awards and Benefits subject to qualifications and eligibility.
The Assistant Store Manager is responsible for establishing and maintaining Guest Services.
The Assistant Manager is responsible for supporting the Store Manager in the various tasks involved in the overall operation of a store, ensuring maximum sales and profitability by developing staff, controlling expenses and shrinkage as well as all aspects of merchandising and inventory control in adherence with all Company policies and procedures.
This position will work up to 38 hours per week.
The minimum age requirement for an Assistant Store Manager is 18.
The physical demands of the job require in excess of 8 hours of standing, walking, climbing ladders and lifting up to 50 pounds.
Prior retail and or management experience is required.
As an equal opportunity employer, Spencer Gifts – Spirit Halloween considers applicants for all positions without regard to race, color, sex, religion, national origin, disability, age, height, weight, marital status, sexual orientation, familial status, genetic information or any other characteristic or protected classes as defined by federal, state/provincial, or local law.
Spencer Gifts – Spirit Halloween will consider for employment qualified applicants with criminal histories.
Benefits include: California Paid Sick Time, Contest Prize Awards, 401K Plan with Company Match, Employee Assistance Program, 30% Merchandise Discount.
All Bonuses, Awards and Benefits subject to qualifications and eligibility.
Brand: Spencer's ?The Sales Associate is responsible for maintaining Guest Services as per Company Standard.
The Sales Associate will support the Store Management Team by generating sales, conducting housekeeping, merchandising, signing, pricing, POS operations and loss prevention in adherence to all Company policies and procedures.
The minimum age requirement for this position is 17.
The physical demands of the job require climbing ladders, lifting up to 50 pounds and may require 8 hours of standing/walking.
As an equal opportunity employer, Spencer Gifts – Spirit Halloween considers applicants for all positions without regard to race, color, sex, religion, national origin, disability, age, height, weight, marital status, sexual orientation, familial status, genetic information or any other characteristic or protected classes as defined by federal, state/provincial, or local law.
Spencer Gifts – Spirit Halloween will consider for employment qualified applicants with criminal histories.
Benefits include: Company Paid Sick Time, Paid Vacation Time, Paid Holidays, Bereavement Pay, Jury Duty Pay, Contest Prize Awards, 401K Plan with Company Match, Medical/Dental/Vision Plans, Employee Assistance Program, 30% Merchandise Discount, College Scholarship Award.
All Bonuses, Awards and Benefits subject to qualifications and eligibility.
Brand: Spencer's The Assistant Store Manager is responsible for establishing and maintaining Guest Services.
The Assistant Manager is responsible for supporting the Store Manager in the various tasks involved in the overall operation of a store, ensuring maximum sales and profitability by developing staff, controlling expenses and shrinkage as well as all aspects of merchandising and inventory control in adherence with all Company policies and procedures.
The minimum age requirement for an Assistant Store Manager is 18.
The physical demands of the job require in excess of 8 hours of standing, walking, climbing ladders and lifting up to 50 pounds.
Prior retail and or management experience is required.
As an equal opportunity employer, Spencer Gifts – Spirit Halloween considers applicants for all positions without regard to race, color, sex, religion, national origin, disability, age, height, weight, marital status, sexual orientation, familial status, genetic information or any other characteristic or protected classes as defined by federal, state/provincial, or local law.
Spencer Gifts – Spirit Halloween will consider for employment qualified applicants with criminal histories.
Benefits include: Company Paid Sick Time, Paid Vacation Time, Paid Holidays, Bereavement Pay, Jury Duty Pay, Monthly Sales Bonus, Yearly Shrink Bonus, Champions Club Bonus, Contest Prize Awards, 401K Plan with Company Match, Medical/Dental/Vision Plans, Employee Assistance Program, 30% Discount Merchandise, College Scholarship Award.
All Bonuses, Awards and Benefits subject to qualifications and eligibility.
Brand: Spencer's The Store Manager is responsible for establishing and maintaining Guest Services.
The Store Manager oversees and is accountable for the operation of a store, ensuring maximum sales and profitability through controlling expenses, shrinkage, human resources management as well as all aspects of merchandising and inventory control in adherence with all Company policies and procedures.
The minimum age requirement for a Store Manager is 21.
The physical demands of the job require in excess of 8 hours of standing, walking, climbing ladders and lifting up to 50 pounds.
Prior retail management experience is required.
As an equal opportunity employer, Spencer Gifts – Spirit Halloween considers applicants for all positions without regard to race, color, sex, religion, national origin, disability, age, height, weight, marital status, sexual orientation, familial status, genetic information or any other characteristic or protected classes as defined by federal, state/provincial, or local law.
Spencer Gifts – Spirit Halloween will consider for employment qualified applicants with criminal histories.
Responsible for scheduling service to be performed.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Greets customers in the service drive area and assists them with the process of checking vehicle in for service.
Assists Service Advisor by working with customer and technician to identify required maintenance.
May advise customers on necessary and recommended services.
May offer additional services and repairs to customers.
Assists with moving vehicles.
Assists customers with reviewing documentation, processing payment, and returning keys for completed services.
Schedules appointments with customer.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Previous experience in automotive or customer service industries desired.
Basic knowledge of the mechanical operations of vehicles.
Excellent interpersonal, customer service, and organizational skills.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Intermediate skills in Microsoft Office products.
Ability and knowledge of the Dealership Management System and other web based applications utilized for operations.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: While performing the duties of this Job, the employee is regularly required to talk or hear.
The employee is frequently required to stand; walk; and sit.
May be exposed to load noise, vibration, exhaust fumes, and other service repair conditions.
Environment Demands: Duties are generally performed in the service area.
Responsibilities may include conducting road tests on customer vehicles.
Work includes inspection of customer vehicles and frequent movement around the Service Department to convey information between customers and service technicians.
Frequently interacts with customers, service manager and service technicians, and employees from various departments in the dealerships.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
The Service Assistant Position has a Pay Scale consisting of the following elements and ranges.
Wages include Base Hourly Compensation of between $17.00 to $23.00.
Please click here to view the CPRA Job Applicant Privacy Notice: CPRA Job Applicant Privacy Notice Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Salary: $125,000
- $200,000 per year A bit about us: We are a growing employment law firm that is on the lookout for a talented Senior Employment Lawyer / Senior Labor Lawyer! Why join us? As a Senior Wage and Hour Attorney / Senior Associate Attorney in our firm, we are able to offer: A competitive base salary! ($125k to $150k for mid-level associates and $150-200k for senior) Medical, dental and vision coverage! 401k! PTO/Vacation! Work from home / work remotely 100%! Job Details As a Senior Labor Law Attorney / Senior Wage & Hour Attorney on our team, we are looking for: 2+ years of wage and hour/employment law experience JD from an accredited law school CA Bar License CA Residence Willingness to do in-person depositions in the LA area every couple of months Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- Mechanical, Plumbing & BAS division This Jobot Job is hosted by: Kelsey Bannon Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $180,000
- $250,000 per year A bit about us: The Director of Operations is responsible for creating structure and driving performance across all field and office operations.
You will work closely with the executive team to set goals, improve systems, strengthen project delivery, and build high performing teams.
This role owns efficiency, quality, profitability, and customer satisfaction across construction and service operations while supporting managers, superintendents, and project leaders.
This position requires an on site presence in Union City five days a week with flexibility as needed.
Why join us? This is an opportunity to step into a true leadership role with a respected mechanical contractor that supports major biotech and high tech environments.
The team focuses on innovation, teamwork, long term client relationships, and doing things the right way.
You will guide operational excellence across mechanical, plumbing, controls, and service divisions and help shape the culture of a growing business in the South Bay.
Job Details Responsibilities: + Lead and support operational teams including field and shop leadership safety fleet production project management and facilities + Build consistent workflows to support scheduling budgeting cost control and project closeout + Champion lean construction technology based solutions and continuous improvement + Support project managers with scheduling planning risk mitigation and job cost performance + Use data and key metrics to track progress and drive accountability + Partner with executive leadership to plan resources budgets and growth initiatives + Mentor managers and future leaders and support training and development programs + Uphold safety quality compliance and client satisfaction standards + Build strong vendor relationships and support issue resolution in the field and office Qualifications: + Ten years of experience in mechanical electrical or plumbing construction or service operations + Five years in a senior leadership or operations related role + Track record of improving systems and managing large complex projects + Familiarity with construction technology platforms such as Autodesk Construction Cloud MS Project or ERP systems + Bachelor’s degree in construction management engineering or business preferred + PMP PE or related certification a plus + Experience working with design build construction plan and spec and integrated project delivery a plus Skills: + Servant leadership style and desire to develop strong teams + Organized detail focused and reliable follow through + Financial awareness and understanding of job cost controls and forecasting + Clear communicator who can manage conflict and build alignment + Comfortable evaluating new technologies automation and prefabrication strategies Benefits: + Competitive base salary + Full medical dental and vision + Retirement plan with matching and profit sharing + Paid time off and support for professional growth and continued learning Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $70,000
- $85,000 per year A bit about us: We are a global clean energy and advanced manufacturing organization developing next generation electric vehicle and energy storage technologies.
With operations spanning North America, Asia, and Europe, the business is scaling rapidly and investing heavily in U.S.
manufacturing and innovation.
This is a mission driven environment focused on sustainability, operational excellence, and long term growth, where finance plays a critical role in supporting expansion.
Why join us? Hands on ownership of accounts payable within a fast growing global manufacturing environment Direct exposure to month end close, audits, and process improvement initiatives Stable core accounting role with clear runway for growth as the organization scales High visibility partnership with vendors and internal stakeholders Opportunity to contribute to a mission focused on clean energy and electrification Job Details Key Responsibilities Process and validate vendor invoices for accuracy, approvals, and supporting documentation Manage payment schedules and execute timely vendor payments Reconcile vendor statements and resolve discrepancies Support month end and year end close activities related to accounts payable Maintain accurate records within the AP system to support financial reporting Respond to vendor and internal inquiries regarding invoices and payments Provide documentation and reporting support for internal and external audits Assist with AP process improvements and efficiency initiatives Support tax related documentation and compliance requirements Qualifications Bachelor’s degree in Accounting or Finance Minimum of two years of hands on accounts payable experience Strong understanding of accounting principles and AP workflows Experience with ERP or accounting systems such as SAP or QuickBooks Advanced attention to detail and accuracy Strong communication and problem solving skills Ability to manage multiple priorities in a fast paced environment Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
