Engineering Jobs in Franksville, WI

Job Title: Tractor Test Driver & Quality Inspector

Location: Racine, Wisconsin (WI)

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

Job Title: Tractor Test Driver & Quality Inspector

Location: Racine, Wisconsin (WI)

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

Cutting Edge Design I Collaborative Team I Work with Major OEMs | Grow Your Design Skills

Drewco in Franksville, WI, is hiring a Design Engineer to work on unique, custom-tooling projects that require creativity, collaboration, and mechanical thinking. You can expect to develop your skills quickly in a hands-on, supportive engineering environment and move into taking on one-of-a-kind, interesting projects.

*Easy access off I-94, so great opportunity for anyone in Racine, Kenosha, or Southern Milwaukee Counties

What You'll Do

• Design workholding and custom tooling in SolidWorks

• Work directly with customers to understand requirements

• Create 3D models, assemblies, layouts, and detailed component drawings

• Calculate dimensions, clearances, and tolerances (GD&T) and create BOMs for manufacturing

• Collaborate with engineering, the shop floor, and sales

• Review your own work and assist in checking others'

• Manage projects from concept through release

What You'll Bring to the Team

• A commitment to quality, precision, and continuous improvement

• A self-motivated attitude with the ability to learn independently and work through challenging problems

• Natural mechanical intuition, ideally supported by hands-on manufacturing or shop experience

Requirements:

• Bachelor's degree in Mechanical Engineering (minimum two-year technical degree considered)

• 2+ years of mechanical design experience in a 3D modeling application

• CAD proficiency required, SolidWorks preferred.

• Experience detailing components.

• Prior mechanical component or assembly design

• Comfort spending most of your day on a computer, modeling and refining designs.

Preferred: fixturing/workholding, machining, or shop-floor experience

Benefits:

Drewco provides a competitive pay and benefits package, including flexible start times, health insurance, 401K, profit sharing, and a relaxed, friendly, productive environment.

Why Drewco?

At Drewco, we create one-of-a-kind workholding and tooling solutions for leading manufacturers across automotive, agriculture, mining, defense, and gear industries. We value collaboration, hands-on problem-solving, and engineers who take ownership of their work. Here, your designs come to life on real shop floors, you collaborate directly with customers and management, and your ideas make a tangible impact every day.

Build. Optimize. Scale.

GZ Printpak LLC is a U.S. manufacturer of high-quality paper packaging for consumer and luxury brands. Located in Mount Pleasant, Wisconsin, the company is part of GZ Media's international print and packaging division, which brings decades of engineering and manufacturing expertise to advanced packaging production.

As our U.S. facility continues to ramp up operations, we are seeking a Process Engineer who will take ownership of our production technology and ensure that our manufacturing lines run reliably, efficiently, and at the highest quality standards.

This is a hands-on engineering role focused on process ownership, production performance, and continuous improvement in a growing manufacturing environment.

Position Summary

The Process Engineer is responsible for the performance, stability, and optimization of manufacturing processes on our production lines. This role works closely with production, maintenance, and quality teams to ensure machines run consistently, produce high-quality parts, and operate at optimal efficiency.

The ideal candidate combines strong technical knowledge with a practical, hands-on approach to troubleshooting, process improvement, and operational support.

Key Responsibilities

• Own the manufacturing process for assigned production lines, ensuring stable, efficient, and high-quality production.
• Monitor production performance and analyze data to identify opportunities for process improvements and increased efficiency.
• Troubleshoot process issues, equipment behavior, and product quality deviations to quickly restore stable production.
• Work closely with operators and maintenance technicians to resolve technical challenges and improve machine performance.
• Develop and maintain process documentation, operating procedures, and setup instructions.
• Lead or support continuous improvement initiatives using Lean and data-driven methodologies.
• Implement process changes that improve reliability, throughput, and product quality.
• Support training for operators and technicians on process standards and best practices.
• Collaborate with equipment suppliers and internal teams when implementing process upgrades or technical improvements.
• Promote safe, standardized, and efficient manufacturing practices across the production floor.

Qualifications

• Bachelor's degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, or a related technical field.
• 3–5+ years of experience in a manufacturing engineering or process engineering role.
• Experience working with industrial production equipment and manufacturing processes.
• Strong analytical and problem-solving skills with the ability to translate production data into actionable improvements.
• Experience with Lean manufacturing, continuous improvement, or Six Sigma methodologies preferred.
• Ability to work collaboratively with production, maintenance, and quality teams.
• Hands-on mindset with the ability to troubleshoot and improve real-world manufacturing processes.

What We Offer

• Health, dental, and vision insurance
• 401k with company match
• Paid time off and company holidays
• Opportunity to take ownership of critical manufacturing technology in a growing U.S. operation backed by a global manufacturing leader

Join GZ Printpak

At GZ Printpak, engineers play a direct role in shaping how our manufacturing systems perform and evolve. If you enjoy solving real production challenges, improving complex processes, and taking ownership of manufacturing technology, we'd love to hear from you.

Equal Employment Opportunity

• GZ Printpak LLC is committed to providing equal employment opportunities to all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.