Engineering Jobs in Downey California

As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.

The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.

The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.

As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.

The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.

Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.

Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.

Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.

Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.

Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.

Ability to provide project management reports as required, support senior level and customer reviews as necessary.

Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.

Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.

Ability to participate or lead in the product development process including design reviews.

5 to 10% Travel required.

Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.

Viewed as an expert and/or resource within the field by peers in and outside the organization.

Bachelor’s Degree and a minimum of 9 years of prior relevant experience.

Graduate Degree and a minimum of 7 years of prior related experience.

In lieu of a degree, a minimum of 13 years of prior related experience.

Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.

5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.

6 years’ strong experience with receiver, Antenna, or Radio design (i.e.

RF).

4 years’ experience with embedded Hardware design.

2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills: Strong familiarity with GPS Module design and topology.

Advanced with High-speed Analog design methodologies.

Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.

Familiar with FPGA design methodologies.

Proficient with DO-254 design.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.

The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English or Spanish .

For information regarding your Right To Work, please click here for English or Spanish .

Northrop Grumman Aeronautics Systems has an opening for a Sr Principal Engineer Air Breathing Propulsion to join our team of qualified, diverse individuals. This position will be located in Redondo Beach, CA.

As an engineer supporting the Air Breathing Propulsion section, the selected candidate will support the design and analysis needs of unclassified and classified programs in Redondo Beach, California.  Candidate will interface with customers to define study areas and report status on current programs and technology development efforts.  Candidate may interface with their management and technical teams to define business relationships and technology initiatives for both IRAD (Internal Research and Development) and CRAD (Contractual Research and Development) efforts.  This position will support a variety of programs performing analysis and integration activities.

Essential Functions:

• Lead engine performance and cycle analysis and provide guidance to programs
• Lead subsonic and supersonic inlet and exhaust design and integration
• Perform project planning to determine program requirements and develop plans for program execution
• Interface with external engine suppliers and manage external engine supplier activities
• Interface with internal and external customers, assisting in defining system requirements, defining study areas, and providing status on current programs and technology
• Develop and present materials for internal and external program related briefings
• Support new business generation and prepare proposal material
• Strong verbal and communication skills to interact with key cross-discipline stakeholders to achieve program objectives in a timely manner
• Technical and ICD writing
• Task planning, conducting technical peer reviews, and mentoring junior engineers
• Apply and contribute to the development of advanced technical principles, theories, and concepts.
• Work on complex technical problems and provide solutions which are highly innovative
• Collaborate and execute on long-range goals and objectives.
• Develop advanced technological ideas and guide development into a final product.

Basic Qualifications for a Sr Principal Engineer:

• Bachelor's degree in a STEM discipline (Science, Technology, Engineering or Math) with 12 years of related engineering experience; OR a Master’s degree in STEM with 10 years of related engineering experience; OR a PhD in STEM with 8 years of related engineering experience.
• Air Breathing Propulsion knowledge and experience on aircraft (subsonic, supersonic or hypersonic) or missile systems.
• Ability and willingness to travel 25% of the time.
• Must have an active DoD Secret (or higher) clearance (with a background investigation within the past 6 years or enrolled into Continuous Education).
• Must have the ability to obtain and maintain Special Access Program (SAP) clearance.

Preferred Qualifications:

• Ten plus (10+) years of experience with Aeronautical Air Breathing Propulsion and Flight Sciences engineering disciplines.
• Experience with survivable propulsion systems
• Experience in technical leadership and guidance of junior Air Breathing Propulsion engineers.
• Experience in Air Breathing Propulsion processes and products throughout the program life cycle.
• Experience in hypersonic design and analysis
• Demonstrated ability to lead an engineering cross-functional team.
• Experience with Agile design teams and tools(Atlassian)
• Understanding of Systems Engineering Principles and Model Based Systems Engineering tools (MBSE) with a practical focus for relevant use cases in propulsion integration.
• Experience with PLM software (Teamcenter)
• Serve as organization spokesperson on advanced projects and/or programs. Act as advisor to management and customers on advanced technical research studies and applications.
• A current active in-scope U.S. Government DoD Top Secret clearance with current or previous Special Program Access (SAP/PAR).

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We are currently seeking a Principal Software Security Engineer to join our Software Product Assurance team in Goleta, Santa Barbara County, CA as a SW Security Individual Contributor supporting development for the SW Product Assurance (embedded program protection and cyber) of our portfolio of programs at the site.

• Raytheon Goleta, Ca Location

What You Will Do:

Our mission is to provide world class Security Software to be used in developing and supporting deployed sensor systems on various platforms.

• Implement Software Security principles to embedded software design, development, integration, and testing of real-time sensor software.
• Develop software applications using C and C++ languages on a variety of computing platforms
• Ensure the SW Product Assurance processes are followed on our programs
• Understand real-time software design and the performance implications associated with specific System Security implementations.
• Work closely with cross functional Engineering teams to define and implement Test Driven Multidisciplinary Capability (TDMC) based execution development and deployment requirements.
• Work in a common development environment to support and facilitate program ability to leverage specific capabilities.
• Interface with customer community to review technical design and support verification of system maturity.

Qualifications You Must Have:

• Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 8 years of relevant software experience
• Experience with C / C++
• Experience with Xilinx UltaScale+ MPSoC, Versal, or similar Embedded Processors
• Experience with embedded OS like VxWorks, Embedded Linux, or similar
• Embedded Software Security experience
• Active and transferable U.S. government issued Secret security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer:

• Experience/knowledge of any of the following:
  • Designing, implementing, testing, or fielding real-time security-oriented solutions on Department of Defense (DoD) programs (embedded experience highly preferred)
  • Cyber security experience. Using security-relevant tools and devices for security auditing, network security, host/server security, communication security, or policy management.
  • Secure boot, containerization and hardening concepts
  • Static analysis concepts, methods & tools
  • Petalinux/Yocto operating systems
  • Cryptographic Algorithms
  • Agile/Scrum/Kanban frameworks and DevSecOps environments
  • Python / Perl
  • Knowledge of modern computer architecture and hardware technologies including:
    • ARM Architecture
    • Interface protocols: PCIe, GPIO, I2C, SATA
    • Field Programmable Gate Arrays (FPGAs)
    • Application-Specific Integrated Circuits (ASICs)
  • Using software configuration management and bug tracking tools
• Experience with validation and verification of software applications
• Experience in a technical leadership role to grow and lead a small technical team

What We Offer:

• We offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs.
• Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance and child/adult backup care.

Learn More & Apply Now!

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Description

D'Leon Consulting Engineers is seeking a Document Control Specialist in Los Angeles, California

Responsibilities

• The control, scanning, indexing, linking, hardcopy filing and distribution of documents in Prolog. This includes internal to Planning & Development Group (PDG) and external to project participants distribution of correspondence, technical submittals, project reports, Requests for Information, and contract plans and specifications.
• Prepare transmittals, distribute documents using Prolog, and retrieve documents through Prolog software.
• Must be highly organized and detail oriented.
• Must be a proactive, self-starter, with a results-oriented focus.
• Must be sensitive to time deadlines, ensure that work is accomplished in the time frames required, and must be flexible and able to readily adapt to changing priorities.
• May be designated as a lead Document Control Technician on a project or element.
• May be assigned training duties to train new staff on document controls procedures.

Other Required Duties

• Assist the Project Manager, the Construction Manager, and the Project Team in all matters relative to project documents and the control and distribution of documents in Prolog Manager.
• Process project documents and maintain document control files in accordance with project document control procedures.
• Document Control Support encompasses both electronic and hard copy distribution and filing.
• Responsibilities include establish and maintain files; receive, index and scan documents into Prolog Manager software.
• Types of project documents include correspondence, field memos, submittals, pay requests, drawing log, safety notices, RFIs, and photos.
• The control, scanning, indexing, linking and distribution of documents in Prolog. This includes internal to external to project participants distribution of correspondence, technical submittals, project reports, Requests for Information, and contract plans and specifications.
• Create binders, create labels, and organize and file contract documents.

Qualifications

• 2 year technical degree
• 5 years of experience with document processing and data management
• Master of Microsoft Office Suite and Adobe Acrobat Professional
• Document control software preferred, Prolog

Plant Engineer

Location: Los Angeles, Ca | Industry: Manufacturing / Food & Consumer Goods

Position Summary

We are seeking a strategic and hands-on Plant Engineer to lead the operation, maintenance, and continuous improvement of packaging machinery within a manufacturing facility. This role is critical to ensuring safe, efficient, and compliant packaging operations that support business objectives, quality standards, and customer expectations.

The ideal candidate is a strong technical leader with deep expertise in packaging equipment, proven experience managing production-line machinery, and the ability to lead and develop high-performing technical teams in a regulated environment.

Key Responsibilities

• Lead, train, and mentor a team of machine technicians to ensure consistent performance and operational continuity.
• Oversee daily packaging line operations, ensuring safety, efficiency, and achievement of production targets.
• Manage preventive and corrective maintenance programs for all packaging machinery and systems.
• Provide technical expertise on packaging machinery, materials, and process optimization (e.g., films, pouches, labels).
• Lead technical projects including new line installations, equipment upgrades, layout changes, and cost-saving initiatives.
• Conduct root cause analysis and implement corrective and preventive actions (CAPAs) to address recurring equipment or process issues.
• Ensure compliance with GMP, quality standards, regulatory requirements, and internal procedures.
• Oversee investigations, audits, non-conformance reports (NCRs), and packaging quality metrics.
• Develop and maintain strong relationships with equipment vendors, packaging suppliers, and service contractors.
• Manage the packaging department's operational budget and oversee capital expenditure (CAPEX) planning and execution.
• Lead equipment selection, process design, and advanced technical troubleshooting.
• Support broader facility engineering and operations initiatives as needed.

Qualifications

Experience

• 5+ years of experience in packaging machinery operations, engineering, or maintenance within a manufacturing environment.

Technical Expertise

• Strong knowledge of automated packaging equipment.
• Experience with Vertical Form Fill & Seal (VFFS) systems is highly preferred.

Industry Experience

• Background in tea, spice, herb, food, or consumer goods packaging is a strong plus.

Leadership & Communication

• Proven ability to lead, coach, and develop technical teams.
• Strong written and verbal communication skills.

Compliance & Problem Solving

• Working knowledge of GMP, QMS, and safety regulations.
• Strong analytical and problem-solving skills with a data-driven mindset.

Language

• Bilingual (English/Spanish) is a plus.

Education

• Bachelor's degree in Mechanical Engineering, Packaging Engineering, Industrial Engineering, or a related technical field preferred.
• Equivalent technical certifications or hands-on engineering experience may be considered in lieu of a degree.

Mechanical Design Engineer

Location: Los Angeles, CA — On-site, 5 days/week

Salary: $95,000 – $180,000 + equity + annual performance bonus

Type: Full-time

A well-funded, mission-driven space technology company is moving fast and building real flight hardware. They're hiring a Mechanical Design Engineer to own the design, analysis, and development of hardware. This is a true hands-on role at the intersection of structures, thermals, mechanisms, and aero, working shoulder-to-shoulder with GNC, TPS, test, avionics, manufacturing, and integration teams.

What you'll do:

• Design mechanical systems for atmospheric recovery: deployables, aerodynamic decelerators, recovery mechanisms, interfaces, and precision landing hardware
• Own hardware end-to-end: concept → requirements → CAD → FEA → prototype → assemble → qualify → flight
• Perform structural/thermal/mechanism analysis for extreme loads, temperatures, and dynamics
• Lead integration across rigid structures + soft goods (e.g., paraglider/parachute-style systems) and flight hardware
• Support and drive test campaigns (ground, wind-tunnel, and flight) and iterate quickly
• Run design reviews (PDR/CDR) and produce clear drawings, BOMs, documentation, and work instructions

What they're looking for:

• 3–5 years of industry experience designing aerospace mechanical hardware
• Strong CAD skills (SolidWorks, NX, or similar) and analysis ability (structural/thermal in ANSYS preferred; SolidWorks acceptable)
• Experience with structures, mechanisms, deployables, and aero-structures (e.g., flaps, hinges, linkages, and ideally parachute/paraglider-adjacent components)
• Strong understanding of load paths, interfaces, and environmental requirements for high-energy flight environments
• Proven ability to take hardware from concept to production and/or flight
• Comfortable with ambiguity, rapid iteration, and fast design–build–test cycles
• Excellent documentation and communication skills

Nice to have:

• Reentry systems, atmospheric flight vehicles, TPS interfaces
• Soft goods integration with rigid structures
• Hypersonic/supersonic/high aero-load environments
• Field test experience (drop tests, flight tests, deployment tests)
• Precision actuation / DOF-limited mechanisms in harsh environments

Benefits snapshot:

• Equity + bonus
• Medical, dental, vision
• Short/long-term disability + life insurance
• PTO + 401(k) with company match
• Subsidized catered lunch/snacks/coffee

Work authorization requirement:

Due to export control regulations, candidates must be U.S. citizens, lawful permanent residents, protected individuals, or otherwise eligible to obtain required U.S. authorizations.

Job Description

Company: Counter

Job Title: Packaging Engineer

Location: Santa Monica, CA – hybrid role 2-3x a week in office

Reports To: Director of Sourcing and Director of New Product Launches

About Us

We are a startup revolutionizing beauty with a purpose; create the industry standard of "clean". Our premium skincare, makeup, and body care formulations combine uncompromising safety, efficacy and environmental responsibility. And our vision transcends products. We are committed to inspiring confident women and others to recognize their collective power to create meaningful change. Our innovative community-commerce ecosystem connects customers, beauty enthusiasts, and loyalists, allowing each person to align with our brand in ways that authentically reflect their values and aspirations. From our formulas to our advocacy efforts to our community connection, we lead clean.

The Role

The Packaging Engineer will be responsible for developing, sourcing, and executing high-quality, cost-effective packaging solutions that meet brand, quality, and sustainability standards. This role partners closely with cross-functional teams, including Product Development, Operations, and Sourcing, to support new product launches and ongoing production needs.

The Packaging Engineer will oversee component development, supplier management, and production readiness while driving process improvements to enhance efficiency and reduce costs.

Key Responsibilities

Packaging Development & Engineering

• Translate creative design concepts into functional, manufacturable, and cost-effective packaging solutions

• Collaborate with Design, Product Development, and Sourcing to ensure packaging aligns with brand standards, functionality, and cost objectives

• Interpret and approve engineering documents, including die lines, material specifications, and technical drawings

• Provide subject-matter expertise to ensure packaging feasibility and production readiness

• Lead design reviews and recommend improvements to enhance sustainability, quality, and efficiency

• Oversee tooling development, including status tracking, vendor coordination, and cost management

Supplier Management & Sourcing

• Lead supplier evaluations, RFQs, and cost of goods (COGs) analyses to ensure quality, value, and timely delivery

• Build and maintain strong relationships with packaging vendors and contract manufacturers

• Identify cost drivers and apply a total cost of ownership approach to decision-making

• Manage packaging component orders and monitor supplier performance for cost, quality, and delivery

• Conduct on-site visits for supplier assessments, color matching, and first production runs as needed

Production Planning & Quality Assurance

• Coordinate with suppliers and internal teams to ensure on-time delivery of packaging components for production and new product launches

• Oversee packaging inventory levels to support production planning and business continuity

• Support first production runs through on-site quality assurance and troubleshooting

• Collaborate cross-functionally with Supply Chain, Planning, and Logistics to ensure readiness for on-time launches

• Drive initiatives to reduce waste, streamline processes, and improve overall packaging sustainability

Process Improvement & Cross-Functional Collaboration

• Develop and implement best-in-class packaging development processes, documentation, and tools

• Partner with Product Development, Regulatory, Planning, Finance, and Logistics to ensure seamless cross-functional alignment

• Champion continuous improvement initiatives and contribute to operational excellence

• Support packaging technology transfers and process standardization across product lines

Qualifications Required

• Bachelor's degree in Packaging Science, Industrial Design, Engineering, or a related field

• 5-6+ years of experience in packaging development, preferably within the beauty, skincare, or consumer goods industry

• Strong knowledge of packaging materials, manufacturing processes, and structural engineering principles

• Proven experience conducting RFQs, COGs analyses, and managing supplier relationships

• Excellent communication, organization, and project management skills

• Advanced Excel proficiency and familiarity with ERP systems (e.g., NetSuite, SAP, Oracle)

• Ability to work independently and collaboratively in a fast-paced, high-growth environment

Preferred

• Experience with sustainability initiatives and waste-reduction strategies

• Knowledge of clean beauty standards and eco-conscious materials

• Familiarity with PLM systems and technical documentation best practices

• Willingness to travel for supplier meetings, production evaluations, and quality reviews

Counter is a people-powered movement that starts with those behind it! We're building a team that reflects the diversity of the communities we serve, where every individual is respected, supported, and empowered to thrive.

We know that different backgrounds, identities, and perspectives make us stronger, more creative, and better equipped to drive change. That's why we're committed to fostering an inclusive culture where everyone belongs.

Counter is proud to be an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender/gender identity or expression, age, national origin, disability, veteran status, or any other legally protected status. We encourage all individuals to apply and join us in shaping a cleaner, more inclusive future for all.

Looking to work for an international company that has a direct effect on improving their environment? Want to work for a company that gives back? OR Do you have experience in LEGAL and looking to work outside the field, or experienced in engineering or construction? This is the company for you! Large environmental engineering firm has over 100 offices in multiple countries! Company is focused on improving air quality, limiting effect of development on the environment, water resources/conservation, and providing several environmental consulting services. Company is searching for an Administrative Assistant for their Los Angeles offices. Company provides amazing benefits and opportunities for growth!

What will I be doing?

• Preparing marketing materials
• Preparing contracts and related documents
• Managing project files
• Creating reports
• Coordinating meetings
• Supporting litigation process with document processing
• Archiving and purging documents as needed
• Providing support to Principal
• Managing schedules for leave Managers and Principal
• Producing and editing technical reports
• Preparing correspondence
• Managing database
• Managing office supplies and ensuring kitchen is stocked
• Making travel arrangements
• Acting as point of contact for property management

What skills do I need?

• Attention to detail
• Ability to manage multiple projects
• Highly professional in speech and presentation

What are the requirements?

• BS or BA required
• 3+ years' experience in a similar position
• Advanced Word Excel, Power Point and Outlook skills
• Advanced Adobe Acrobat

Job Information

Work Location: Los Angeles / New York (Business trips across multiple North American cities are required)

Training Arrangement: A 5-week training session in China is mandatory after onboarding

We are building the first localized R&D system for a Chinese tea beverage brand in North America.

Here, we encourage an experimental spirit and innovative thinking, with a focus on the full-chain R&D process from flavor development to commercialization.

If you are passionate about tea beverages, love exploring new flavors, and are willing to grow in a cross-border environment, this will be your ideal destination.

Job Responsibilities

1. Collaborate with brand, marketing, supply chain, operations and other teams to drive the full implementation of products from concept to launch.

2. Conduct product testing and flavor optimization based on user research, competitor analysis and store trials.

3. Participate in new product R&D, formula adjustment and raw material selection to ensure flavor, cost and stability.

4. Track the performance of launched products and conduct continuous review and iteration.

5. Assist in establishing a North American localized product database and standardized R&D documents.

Qualifications

1. Bachelor's degree or above in Food Science, Catering Management, Nutrition or related fields.

2. Over 2 years of product development experience in catering, tea beverage or FMCG industry.

3. Familiar with food raw materials, formulas and basic process design, with sensory evaluation and cost control capabilities.

4. Fluent in English, with excellent cross-cultural communication and project coordination skills.

5. Strong logical thinking and pressure resistance; candidates with experience in tea beverage or beverage chain brands are preferred.

Process Controls Engineer

Los Angeles, CA | Up to 50% Travel | Manufacturing / Mining Environment

We are working with an industry leading organization looking to bring on a Process Controls Engineer to support the design, development, and implementation of industrial control systems across multiple facilities.

This role will focus on delivering process control design, PLC programming, and automation support within a heavy industrial environment such as manufacturing, mining, or aggregates production.

What You'll Be Doing

• Design and develop process control systems for industrial production facilities
• Program and maintain PLC and HMI systems, primarily Rockwell / Allen Bradley platforms
• Support the design, installation, and commissioning of plant automation systems
• Provide cost estimates and technical input for plant modifications and new facilities
• Manage and support automation projects, working with internal teams and external contractors
• Review project designs for feasibility, cost effectiveness, and technical accuracy
• Support plant operations through troubleshooting, optimization, and continuous improvement initiatives
• Contribute to the standardization and modernization of control systems across facilities

What We're Looking For

• 5+ years of experience in Controls or Automation Engineering
• Strong experience with Rockwell / Allen Bradley PLC systems
• Experience working in manufacturing, aggregates, mining, or heavy industrial environments
• Hands-on experience with PLC programming, HMI development, and industrial networking
• Ability to support multiple projects and plant locations
• Strong troubleshooting and field support experience

Additional Skills That Are a Plus

• Experience with SCADA platforms such as Wonderware or PI Historian
• Knowledge of industrial networking, SQL, or plant reporting systems
• Electrical engineering background or related technical degree

Location & Travel

This role is based in Los Angeles, CA with up to 50% travel to support operational sites and project work.

Why This Role

You will be working on large scale industrial operations supporting automation systems that help power critical infrastructure and construction materials across the U.S.

We are currently looking for a Civil Project Engineer who is ready to engage in a large alternative delivery (CMGC) project in Los Angeles County. This project is a multi-year project that will widen the 105 freeway from the 405 to the 605. This widening will increase HOV capacity, reduce congestion along the corridor and introduce tolling to the 105. Phase one of the project is starting at $400 Million, and the remaining phases will push the project towards $1.1 Billion. This is a great opportunity to join the team as we are building the first phase and prior to the project breaking ground on the second phase and contribute to the success of this critical project to improve mobility ahead of the 2028 Olympics.

The ideal candidate is capable of thinking outside the box, understands multi-staged construction projects, is detailed oriented with experience in heavy civil construction. The position is directly accountable for the safety, financial performance, and team development on site.

This position will integrate with the project's structures team that focuses on bridges, walls, shoring and foundations. Your role on the structures team will depend on your desires as well as strengths and previous experience. In addition to self-performing various scopes on the project the structures team will also cultivate and maintain strong relationships with the subcontractors, and suppliers as well LA Metro, Caltrans and the Construction Managers staff.

Key Responsibilities:

• Work On Site to help solve problems that occur during construction
• Partner with Project Superintendent in development of a project site logistics plan
• Maintain thorough understanding of the Myers contract with Caltrans
• Monitor project costs and Job Cost Report
• Analyze and forecast monthly Total Cost Projection reports
• Monitor project labor
• Lead the project's quality process
• Develop, schedule and lead project teams on submittals, RFI's and Change Orders
• Develop and maintain effective relationships with the Designer, vendors, subcontractors and owners
• Implement all applicable Safety Programs.

Qualifications:

• Bachelor's degree in construction management or engineering preferred
• 2+ Years of Experience in highly complex and related highway or structures construction projects in California.
• Experienced dealing with subcontracts, subcontractors and self-perform work
• Experience leading a successful project team, including development of employees and maintaining relationships with external entities
• Excellent organizational, team management, problem solving, motivational skills

Benefits:

· Health Insurance (Medical/Dental/Vision)-our company covers 80% of the healthcare cost for our employees and their dependents. Employees are responsible for the remaining 20%, which is pre-taxable.

· Company provided vehicle or car allowance with fuel card.

· Flexible Spending Account (FSA)/Dependent Care FSA

· 401K with 8% Match

· Life insurance

· Voluntary insurance plans available-Accident/Critical Illness/Cancer/Hospital Indemnity/Life and AD&D

· Paid time off

· Professional development assistance

Apply Here: and Sons Construction is a Heavy Civil Construction Company. We specialize in Bridge Construction, Bridge Restoration, Roadway Rehabilitation, Water/Wastewater Treatment Plants, Concrete Bridge Overlays, Concrete Paving and Alternative Delivery Projects, including Design Build, CMGC, CMAR and Progressive Design Build throughout California and Colorado. For more information on our company please visit & Sons Construction is proud to be an equal opportunity and affirmative action employer regardless of race, color, gender, age, sexual orientation, gender identity, religious beliefs, marital status, genetic information, national origin, disability, or protected veteran status

Senior Machine Maintenance Engineer

Chatsworth, California

Are you a Senior Machine Maintenance Engineer who thrives on diagnosing complex mechanical faults across large industrial machinery? Do you enjoy being the technical lead who restores uptime and improves reliability? Are you degree qualified in mechanical or electrical engineering and ready to take ownership of a high precision manufacturing site? If so, this opportunity may be the right next step for you.

We are working exclusively with a precision manufacturing business in Los Angeles producing high tolerance components on advanced CNC mills, lathes and grinding equipment. Our operation supports demanding industries and maintains tolerances to within 0.0005 inch. Equipment reliability is critical and the Senior Machine Maintenance Engineer will play a central role in protecting performance, uptime and quality.

As the Senior Machine Maintenance Engineer your responsibilities will include

• Deliver proactive preventive and predictive maintenance across industrial machinery including CNC equipment, grinding machines and large scale production systems

• Diagnose and resolve complex mechanical faults including alignment issues, vibration, spindle and bearing failures and precision loss

• Troubleshoot electrical and control systems including drives, motors, sensors and PLC integrated machinery

• Lead root cause investigations, implement corrective actions and improve long term machine reliability

• Develop maintenance strategies, mentor technicians and drive continuous improvement across the site

As the Senior Machine Maintenance Engineer you will bring

• A degree in Mechanical Engineering, Electrical Engineering, Mechatronics or a related discipline

• Strong hands on mechanical diagnostic capability across industrial or manufacturing equipment

• Solid electrical fault finding skills including drives, motors and industrial control systems

• Experience working on large scale production machinery such as pressing machines, vacuum systems or similar heavy industrial equipment

• The confidence to work independently, document findings clearly and minimise production disruption

There is genuine progression available. You will have the scope to build and shape your own maintenance function over time, with increasing responsibility and strategic input. On site amenities and a collaborative culture make it a stable and rewarding place to work.

All successful applicants will be contacted within two working days.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

The Software organization develops software applications, including integration and test on missiles, launchers, radars, naval systems, fire control and other complex systems.  Our precision software and firmware integrate operating systems, device drivers, networking, and control software to bring together sensor, guidance, and flight control processing features to complete the mission.  The Software org is made up of several Centers located across the country, responsible for all aspects of the software development lifecycle.  Our 4000+ software engineers design, develop, and build innovative solutions for our customers.  Join our fast-paced agile teams on the leading edge of technology. 

As part of the Software Engineering Directorate’s (SWE) Effectors Center (EC) team, you will be an integral part of helping Raytheon further our vision to be the global leader in core and next-generation weapon and security solutions.  By any measure, Raytheon is an exciting and rewarding place to work.  We pride ourselves on developing mission-driven, world-class talent. The result is a workforce that takes pride in the company and consistently delivers superior solutions.

Our Principal Embedded Real-Time Software Developer/Integrator is a technical position that works in an Integrated Product Team (IPT) environment to architect, design, implement, test, debug, and deploy Software for Firmware (FPGA) and Hardware solutions that meet current and next generation autonomous avionics systems’ needs. Working with a cross-discipline team, the candidate must have experience developing, testing, and integrating software for edge or embedded devices and/or subsystems (like telecom, medical, IoT, automotive, or robotics) where hardware operation, time critical function, functional reliability, mission assurance, and safety might be major concerns.

The successful candidate will work with Product Owners, Chief Engineers, Management and other IPT members using Lean and/or Agile practices to ensure that embedded software is designed and developed to reliably operate toward the intended functions.

This position is within the Effectors Center of the Software organization, and is an onsite role located in Tucson, AZ.

What You Will Do

• Architecting, designing, implementing, testing, and debugging integrated embedded real-time software within heterogenous systems composed of firmware and hardware.
• Working within a cross-discipline team to define, refine, and improve product concept, implementation, testability, and guaranteed, measurable quality.
• Teaching, coaching, and mentoring less experienced staff.
• Contributing to proposals as well as preliminary and critical design reviews.
• Ability to obtain program access.

What You Will Learn

• Working across a product line in collaboration with other teams.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience.
• Experience including at least two of the following: Embedded C++ Software, Embedded Software Security, Software Architecture Design and implementation.
• Experience using embedded Real Time Operating Systems (RTOS) (e.g., Green Hills, Integrity, Wind River VxWorks, Linux, etc.).
• Experience developing complex systems involving the integration of hardware, firmware, and software.
• Ability to obtain Interim Secret Level U.S. government issued security clearance is required prior to start date with the ability to obtain program access after start. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Familiarity with rate monotonic theory, practice, and limitations.
• Familiarity with layered architectural principles, and their limitations.
• Familiarity with reading electrical schematics and relating it to software function.
• Familiarity with reading firmware source like VHDL or Verilog.
• Familiarity with assembly language in at least one processor/controller family.
• Experience using lab instruments like power-supplies, digital multi-meters, oscilloscopes, and logic analyzers.
• Experience with developing device drivers for bare-metal and/or OS applications.
• Experience leading engineering teams in delivering systems (of various size) involving the integration of hardware and software.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Offered Based On Eligibility

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role:

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

• Location Information: This position is onsite at our campus in beautiful Tucson, AZ. Tucson has a friendly, caring, and laid-back atmosphere, combined with the innovation and energy of a metropolitan region, and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round.

• Virtual Fly Over City of Tucson & Community, YouTube Video Links

• “Raytheon In Tucson”: ,-az-location
• “Tucson is Awesome”: “Winter in Tucson”: TucsonSoftware

  As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

  The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

  Privacy Policy and Terms:

  Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

Raytheon engineers develop the next generation of defense technologies that support our military and protect our nation and allies. We are the world’s leader in developing cutting edge defense technologies through simulation-driven virtual environments. Our software products empower the next generation of innovative weapons systems and advanced AI/ML solutions.

We are looking for Systems Engineer II - Modeling Simulation & Analysis Engineers who enjoy solving complex problems, engaging in a dynamic team environment, and are eager to learn.

As a Systems Engineer II - Modeling Simulation & Analysis Engineer, you will participate in challenging multi-disciplinary work across integrated product teams consisting of Guidance, Navigation & Control (GNC), Signal Processing and missile-and-sensor-level Performance Simulations. Our Performance Simulation teams provide, develop, and maintain high fidelity performance simulations, evaluate system performance, support new business initiatives and develop & execute technology roadmaps.  This is an Onsite role in Tucson, AZ.

What You will Do

• You will create high fidelity simulations and models for missile design, performance assessment, and flight test support
• You will be responsible for the development and implementation of modeling solutions, and subsequently conduct trade studies and evaluation of system and subsystem performance
• You will work in a team environment, receiving input from the team supervisors and providing guidance and/or direction to other team members
• You will collaborate with Guidance, Navigation & Control (GNC), Signal Processing, and other performance personnel to perform simulation activities according to the program schedule
• You will work on different projects, determine, and develop approaches and solutions, and provide development guidance throughout the product lifecycle from initial concept to fielded product
• You will provide technical expertise for the simulation products of a specific program, and assist Senior Modeling Engineers in the preparation of detailed plans, and may interact with government counterparts as an authority on simulation products

Qualifications You Must Have

• Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 2 years of relevant prior experience
• Experience applying object-oriented software design and programming in C or C++
• Experience using Python or MATLAB for evaluation of data sets
• Experience modeling or simulating physical systems
• Experience in modeling, simulation, statistics, and/or analysis for existing or proposed engineering solutions
• Ability to obtain an Interim Secret U.S. government issued Security Clearance is required prior to start date with the ability to obtain special program access after start. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Advanced Degree in Engineering, Science, Mathematics, or related STEM degree
• Experience using applied system engineering principals, experience working on a team and/or by yourself, interfacing with multiple engineering disciplines
• Experience creating and/or presenting technical briefings
• Experience developing signal processing / GNC algorithms or models for missile applications
• Experience with control hardware design & test and/or hardware & software integration
• Experience modeling physics and/or modeling physical systems as related to flight dynamics
• Experience using UNIX / Linux based workstations and using Software Configuration Management tools such as Git
• Course work or experience in some of the following fields: radar, signal & image processing, radar and/or EO/IR environment models, digital communications, probability and statistics, linear algebra, estimation theory, optimal control, system architecture, inertial navigation, guidance theory

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligible – relocation assistance available for this position

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.  Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires onsite work in Tucson, AZ: ,-az-location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Northrop Grumman Defense Systems sector (NGDS) is looking for you to join our Advanced Weapons Business Unit as a Sr. Staff Chief Engineer of the Stand-in Attack Weapon (SiAW) program. This position will report to the Advanced Weapons Business Unit Director of Engineering.

The selected candidate will be required to work full-time, on-site at our facility in Northridge, CA.

This role will serve as the definitive technical authority for all aspects of engineering on all program elements (systems engineering/software/support/test) and lead a multi-disciplined team managing the technical performance of the program meeting cost and schedule requirements including subcontracted elements.

Typical Responsibilities Include:

• Ownership of the technical baseline and oversees technical activities across multiple contracts within the SiAW Program

• Maintain cognizance over technical activities within and across contracts for requirements development, hardware/software design, integration, and verification/validation activities.

• Solve technical problems and provides solutions that are technically sound and programmatically executable.

• Provides technical leadership, direction and mentoring to other technical employees in the application of systems engineering principles, tools, and techniques to achieve practical end results.

• Chair technical meetings such as requirements reviews, design reviews, and readiness reviews.​

• Facilitate technical support, review, and approval of engineering documents and drawings.

• Support program reviews as an engineering review authority, and assist in resolution of program engineering challenges (technical, financial, and staffing)

• Drive process development, continuous improvement, and affordability initiatives

• Ensures that the program is adhering to sound engineering processes in the development, test, and sustainment of products for our customers and is compliant with company policies, procedures, and quality standards.

• Support assessment of cost and schedule impacts of technical decisions

• Be the technical liaison to the program manager to ensure successful execution to project budgets and schedules.

• Support the program manager in risk and opportunity management by identifying and owning risks associated with system performance.

• Interface with functional departments to secure team staffing

• Work with suppliers and be able to articulate project requirements.

• Brief internal and customer leadership on progress of work assigned.

• Act as customer interface for all technical and execution matters related to SiAW Program activity.

Basic Qualifications for a Sr. Staff Chief Engineer:

• Bachelor’s degree in engineering or STEM-related discipline with 14 years of experience, or 12 years with a master’s degree and 10 years of experience with a Ph.D.

• Demonstrated technical leadership skills, decisiveness, and ability to make sound technical judgments with limited information.

• Well-versed, skilled, and disciplined in system engineering processes

• Experience leading design, production, and integration of complex systems

• Background in aerospace systems; working knowledge of aircraft systems, missile systems, avionics, software systems, and their design drivers.

• Candidate must have good communication skills, strong interpersonal skills, and good oral and written presentation skills.

• *Must have an active DoD Secret clearance (with a background investigation completed within the last 6 years or currently enrolled into Continuous Evaluation)

Preferred Qualifications:

• Experienced in Air Launched Weapon/Missile Systems Development

• Working knowledge of integration of missile seekers, sensors, and software

• Experience as technical lead, Integrated Product Team Lead, or other leadership role in a program office or business function with demonstrated team building, organizational, and interpersonal skills.

• Demonstrated ability to formally present technical solutions to senior leadership.

• Experience in hardware/software integration of embedded systems

• Experience directly managing or leading engineering teams

*Living in Northridge offers a perfect combination of urban living with the beauty of nature. It is a short drive away from downtown Los Angeles, the Hollywood Hills, or the rest of the San Fernando Valley.

Take advantage of your flexible work schedule to enjoy shopping at the local Northridge Fashion Center or spend time at the local Recreation Center as well as easy access to nearby protected natural areas such as the Chatsworth Reservoir, the Santa Susana Pass State Historic Park, Lake Balboa or within driving distance, spend a day at the beach or snow ski at our local mountains. With Cal State Northridge right in the heart of town, the area has an active college-town energy combined with family-friendly suburban charm. The stunning southern California climate makes for year-round easy living. With an average of 284 sunny days during the year, it is safe to say you’ll have plenty of time to enjoy your outdoor activities to the fullest. 

#definingpossible

For more information, please click on this link below:

Northrop Grumman in Northridge-California - Northrop Grumman

Description

At the heart of Defining Possible is our commitment to missions. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We're looking for innovators who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we'll support yours of expanding your personal network and developing skills, whether you are new to the field or an industry thought-leader. At Northrop Grumman, you'll have the resources, support, and team to do some of the best work of your career.

Northrop Grumman Mission Systems Navigation, Intelligence and Connectivity Division, Engineering and Sciences is seeking an Engineering Director. This position will be onsite in Woodland Hills, CA and will lead the Business Execution Engineering organization, for the Navigation and Cockpit Systems Business Unit, reporting to the Senior Director of the Engineering organization. As the Engineering Director, you will be responsible for leading a highly dynamic, growing multi-discipline engineering team of approximately 60 senior technical leaders and be the primary E&S POC for the respective Business Unit leadership team.

What You'll get to Do:

• Primary E&S POC for Business Unit leadership
• Lead the team with primary accountability for executing engineering scope of work within allocated cost and schedule. Ensure consistent rigor in planning, earned value reporting, metrics generation, and issue resolution as related to engineering execution.
• Collaborate with program office and engineering functional organization on resourcing programs and meeting competing demands of a diverse business base.
• Collaborate closely with business development, PMO, and functional engineering on architecting new systems and proposal planning to grow our business base.
• Drive technical issues on BU programs, captures, IR&D, etc. to closure by providing coaching, mentoring and leadership to broader technical team
• Lead strategic actions to improve the business of engineering
• Collaborate with discipline engineering team members across the Sector to share best practices and accelerate implementation of Sector standards
• Develop technical leaders (e.g. CE, SEIT Lead, IPT leads, etc.) to ensure business success
• Support development of technical discriminators for priority BU captures and pursuits
• Hold technical leaders accountable to execute per defined engineering processes and best practices
• Collaborate with other functional partners to resolve complex issues in a timely manner to help meet program commitments
• Travel up to 25% of the time

This position is contingent upon Clearance.

This position will be onsite in Woodland Hills, CA.

Basic Qualifications:

• Bachelor's degree in Science, Technology, Engineering or Mathematics or related technical fields with 12 years of experience; Master's degree with 10 years of experience; PhD with 8 years of experience

• 8 years of professional experience in the defense or aerospace industries

• 5 years demonstrated success managing multiple technical teams across multiple geographic sites

• 5 years previous experience working in a technical role with experience across multiple program phases

• Prior profit and loss leadership experience (e.g. PM, OUD, IPT with >$50M workscope, etc.)

• Demonstrated experience executing the capture phase of the program lifecycle

• Demonstrated experience effectively leading diverse technical teams across multiple locations

• Demonstrated knowledge of engineering process and tailoring

• Clearance: Candidate must currently have and be able to maintain an Active Secret clearance

• Candidate must be able to obtain and maintain a TS/SCI Clearance

Preferred Qualifications:

• Advanced degrees in Science, Technology, Engineering, Mathematics, or related technical fields

• Active DoD Top Secret/SCI Clearance or higher.

• Success as a leader of an organization >~300 employees

• Experience with product line management

• Experience executing the capture phase of the program lifecycle

• Proven success in creating and executing affordability initiatives

• Independent Review Team leadership with cross discipline stakeholders

• Experience leading execution of development programs
• Knowledge of navigation systems engineering

What We Can Offer You:
Northrop Grumman provides a comprehensive benefits package and a work environment which encourages your growth and supports the mutual success of our people and our company. Northrop Grumman benefits give you the
flexibility and control to choose the benefits that make the most sense for you and your family.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Next Generation Radio Frequency Sensors Management Software Department mission is to provide world class Software for our customers' wide array of RF/EOIR and high-energy laser sensor products for airborne and space applications. Our software capabilities include software requirement development, design, modeling/simulation, real-time embedded, signal processing and data processing, infrastructure software, software testing, integration, and verification. Next Gen RF Sensors SW team in El Segundo CA is looking to add a Software Engineer to their development team.

What You Will Do

• Design, develop, and test software based on software trouble reports in an agile, collaborative environment, delivering builds
• Demonstrate critical thinking skills, the ability to thrive in small, empowered teams, and an intense desire to directly enable our customer's success
• Troubleshoot, debug, and optimize existing code for performance and efficiency in complex environments
• Write and maintain comprehensive documentation for software applications, including system architecture and design specifications
• Participate in agile execution and continuous improvement
• Work collaboratively with multiple engineering disciplines to analyze, implement, and test system modification requests to the existing system baseline

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience.
• Experience with software development, test, and/or integration using C, C++, or Java.
• Experience with containerized applications such as Docker and Kubernetes.

Qualifications We Prefer

• Experience with embedded or low-level software development, including OS-adjacent or hardware-interfacing work.
• Experience with CI/CD tools and infrastructure such as Jenkins, Git, Bitbucket, or similar.
• Experience developing and integrating OMS-based architecture
• Familiarity with Agile lifecycle process including Scrum, Continuous Integration, and Test-Driven Development Methodologies
• Experience developing embedded software for sensors, algorithm development, signal or data processing preferred.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Relocation Eligible – Relocation assistance available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Visit Raytheon Landing Page: Raytheon El Segundo, CA Location

This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Effector Digital Products (EDP) department designs digital electronic circuit cards and electronic units which are supported from proposal through transition to production. Our systems are subject to environments ranging from the frigid, sub-zero vacuum of space to the blistering heat of the desert floor, to the high pressures of the ocean depths.

The Digital, RF and Power Team is seeking a Principal Digital Design Engineer with digital electronics design and analysis skills to join our team. 

This position is 100% ONSITE in Tucson, Arizona.

What You Will Do

We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology to design digital electronics circuits that implement missile guidance, video and digital signal processing. Our technology base includes high-speed digital electronics, configurable logic, and homogeneous / heterogeneous multiprocessor designs.

The Principal Digital Design Engineer is responsible for the design, analysis, simulation, test, and integration of digital electronic modules and/or CCAs for Missile applications. The candidate should be experienced in all aspects of circuit card design including:

• hardware designs with processors

• FPGAs

• memory

• industry interfaces, such as PCIe, Ethernet, I2C, SPI, and UART

Qualifications You Must Have

• Bachelor’s Degree in Electrical Engineering, Computer Engineering or Electrical Engineering Technology.

• Minimum of 8 years of engineering digital circuit design experience to include at least 2 of the following:

  • Development and design of electronic circuit designs, multi-assembly system/unit design

  • Ability to take a design concept from the block diagram or requirements level to development of a complete hardware design, and verification via test and integration

  • Experience with PCB design process and expertise in tools used to design (schematic capture), analyze and simulate designs prior to hardware execution.

• The ability to obtain and maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizen are eligible for a security clearance

Qualifications We Prefer

• Master’s degree in Electrical Engineering

• Experience with embedded test techniques, design for test, design margin analysis and design for production for complex circuit card assemblies between 16 and 32 layers

• Experience using Mentor Graphics Design Creation (Siemens EDA) tools: DxDesigner, xDX Designer VX, and Xilinx (Zynq Ultrascale, Vivado, Atrix)

• Experience using PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)

• Constraint Editor System (CES)

• Experience with FPGA code development or software

• Experience leading a program transition from development to production

• Experience managing technical/schedule risks to identify cost reduction opportunities to meet assigned deadlines

• Experience with intellectual property generation (patents & publications)

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role:

Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: position is in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round.

Tucson, AZ: ,-az-location

#LI-CV1

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon is seeking an Industrial Engineer II to support the Effectors portfolio of factories in Tucson, Arizona to maximize throughput, improve efficiency, and deliver increasing value to the customer.  Industrial Engineers are responsible for Labor Performance Analyses, Process and Value Stream Mapping, Line Balancing, Capacity Planning, Manpower Planning, Factory Layouts, Factory Simulations, Strategic Planning, Project Management, Continuous Improvement, and more.  Every day presents new and exciting challenges and reminds us of our mission to deliver to those who defend us.  We hope you are as excited about this opportunity as we are.

What You Will Do

• Model factory operations by generating process flows, value stream maps, pareto charts, spaghetti diagrams, and CAD drawings to graphically show production processes, the movement of material, the exchange of information, and key performance indicators
• Calculate resource utilization and identify throughput constraints
• Apply Six Sigma and Lean Manufacturing principles to reduce undesirable effects, improve efficiency, and meet or exceed cost, quality, and on-time delivery goals
• Influence factory roadmaps and investment strategies by drafting infrastructure improvement and expansion proposals, and planning the integration of new products, technologies, and equipment that create a competitive advantage 
• Work with cross-functional teams to execute projects that address obsolescence, improve factory performance, and promote growth
• Support new production contract/new product proposals and new product integration efforts
• Improve factory safety and work cell ergonomics

What You Will Learn

• Industrial Engineering tools and methods used to build factory models to advance continuous improvement and future-state forecasting
• Aspects of the Defense Industry and how to meet challenging mission requirements while also meeting cost, quality, and schedule targets
• The CORE Operating System and the CORE Common Methods used to align priorities and meet key business objectives
• Executive Presence and how to support leadership in making data driven decisions that result in measurable improvements
• Project planning and project management techniques to deliver results and meet critical milestones supporting key business objectives
• How to influence and lead others working with high-performing cross functional teams and frontline operators and specialists who assemble, test, and deliver our products everyday
• Strategic planning and how to develop business proposals that generate returns on invested capital within the factories
• Raytheon’s Leadership Values and Behaviors

Qualifications You Must Have  

• Typically requires a Bachelor's degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience unless prohibited by local laws/regulations OR an applicable STEM Master’s degree.
• Experience in the application of industrial engineering tools and methodologies, such as Lean Manufacturing, Capacity Modeling, Facility Design, or Process Optimization
• The ability to obtain and maintain a Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) clearance

• Active and transferable U.S. government issued security clearance is required prior to start date. U.S. Interim Secret security clearance required on day 1. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Bachelor’s or Master’s degree in Industrial Engineering, Systems Engineering, Manufacturing Engineering, or similar engineering discipline
• Excellent written and oral communication skills
• Experience/Education with factory layout and work cell design/optimization
• Experience/Education with simulation modeling and capacity analysis tools/methods
• Experience/Education with project management
• Experience/Education with CAD software
• Six Sigma certifications
• Leading teams and capable of influencing without authority

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
• This position is NOT eligible for relocation

Learn More & Apply Now!

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
• We embrace individuality of thought to fuel opportunity for our employees, our customers, and our communities. We work toward progress, knowing that a more innovative world is critical to our mission. Not just in this moment, but always,

Please consider the following role type definition as you apply for this role. ‒ ONSITE Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms