Jobs in Colgate, WI

NOTE: This position must be performed in Washington, DC so relocation to Washington, DC will be required.

Recruitment Incentive: Applicants may be eligible for a $75,000 recruitment incentive in accordance with regulatory requirements. Click apply to view full details and eligibility of this recruitment incentive.

At their core, those who join the Secret Service are courageous, intelligent, strong and determined. A diverse team capable of balancing our investigative mission and fulfilling our protective legacy. Proven to be worthy of trust and confidence. Be tomorrow's Secret Service.

Duties

During the course of their careers, Secret Service Police carry out assignments in protection. Duties include:

• Providing protection for The White House Complex, The Vice President's Residence, The Main Treasury Building and Annex, and foreign diplomatic missions and embassies in the Washington, D.C. area.
• Traveling in support of the Presidential, Vice Presidential, and foreign heads of state/government missions.
• Enforcing mandated protective responsibilities as described under Title 18, United States Code, Section 3056A.

Requirements

• U.S. citizenship is required.
• Possess a current valid U.S. driver's license.
• Must be at least 21 years old at the time of application and under 40 at referral. Exceptions may apply for those with current or prior service in federal law enforcement positions covered by special retirement provisions. The Secret Service has determined that age is essential to the performance of this position.
• Carry and use a firearm. Maintaining firearm proficiency is also mandatory.
• Possess uncorrected visual acuity of no worse than 20/100 binocular. Possess corrected visual acuity of 20/20 or better in each eye.
• Hearing loss, as measured by an audiometer, must not exceed 25 decibels (A.S.A. or equivalent I.S.O.) in either ear in the 500, 1000, and 2000 Hz ranges. Applicants must be able to hear the whispered voice at 15 feet with each ear without the use of a hearing aid.
• Submit to a drug test prior to your appointment and random drug testing while you occupy the position.
• Complete 12 weeks of intensive training at the Federal Law Enforcement Training Center (FLETC) in Glynco, GA or Artesia, NM and 17 weeks of specialized training at the James J. Rowley Training Center in Laurel, MD.
• Certify that you have registered with the Selective Service System or are exempt from having to do so, if you are a male applicant born after December 31, 1959.

About the role

As an Engineering Project Manager, you will oversee production and automation projects while leading a small team of project managers and engineers. You will serve as the key coordination point between Sales, Production, Quality, Engineering, and Field Service, ensuring projects are delivered on time and meet customer expectations.

This is a hands-on leadership role where you’ll see the direct impact of your work on customer satisfaction, team performance, and operational excellence. Caljan combines cutting-edge engineering with a collaborative, international culture, offering career growth in a global company specializing in material handling and automation solutions.

What You’ll Do

• Lead and mentor a U.S.-based project team (2 project managers + 2 engineers)

• Manage multiple production and automation projects from sales handoff through production completion

• Coordinate cross-functionally to ensure smooth execution across Sales, Production, Quality, Engineering, and Field Service

• Ensure projects meet quality, schedule, and scope requirements

• Maintain strong customer relationships and manage expectations during execution

• Identify and proactively resolve project risks or issues

• Track schedules, resources, and team performance

• Support continuous improvement and adherence to established processes

This role is execution-focused: processes are in place, and your job is to make sure they run efficiently while your team delivers exceptional results.

What You Bring

• Bachelor’s degree in Mechanical Engineering, Automation, or related field

• 5+ years of project management experience in manufacturing, industrial automation, material handling, or engineered product production

• Experience managing small teams (1–5 direct reports)

• Strong understanding of production systems, engineering projects, and technical execution

• Excellent leadership, communication, and organizational skills

• Comfortable managing customer interactions and cross-functional coordination

• Proficiency with Microsoft Project, spreadsheets, and project tracking tools

Why This Role Matters

This is a high-impact, operational leadership role where you will:

• Take full ownership of customer projects from handoff to production completion

• Lead a small team to deliver consistent, high-quality results

• Coordinate across departments to ensure smooth execution and satisfied customers

Compensation & Benefits:

• Salary: $110,00 – $120,000

• Benefits: Caljan offers medical, dental, vision, and 401K with a match.

About Caljan

Caljan is a mid-sized global engineering company specializing in automated material handling solutions. With operations across Europe, the UK, and the U.S., we combine global reach with an entrepreneurial mindset. Our teams work closely across regions to deliver technically advanced, customer-focused solutions.

Join Our Team as a Payroll & Benefits Coordinator!

Key Responsibilities

• Payroll Processing: Manage bi-weekly payroll using ADP Workforce Now, including updates for pay rates, deductions, PTO, and garnishments.
• HRIS Maintenance: Keep employee records up-to-date and accurate in the HRIS system.
• Benefits Administration: Handle new enrollments, terminations, and life event changes, as well as processing benefit invoices.
• Employee Support: Assist employees with benefit enrollments, inquiries, and escalations when needed.
• Compliance Management: Ensure adherence to benefit regulations and other required reports, including COBRA, life events, and BLS reporting.

What We're Looking For

Skills:

• Attention to detail and ability to handle multiple priorities.
• Strong organizational, verbal, and written communication skills.
• Proficiency in Microsoft Office, especially Excel.
• Problem-solving skills with a customer-focused mindset.

Education & Experience:

• Bachelor’s degree (B.A.) or equivalent experience.
• 1-2 years of related experience in payroll and benefits administration.
• Experience with HR systems (e.g., ADP Workforce Now) is a plus.

Why Work With Us?

• A collaborative and supportive team environment.
• Opportunities for professional growth and development.
• Be part of a company that values its people and culture.

Equal Opportunity Employer

Gustave A. Larson is an equal opportunity employer. We’re committed to a workplace free of discrimination and harassment and welcome applicants of all backgrounds. We provide reasonable accommodations for individuals with disabilities.

Why Larson?

At Larson, we believe in fostering a work environment that’s as inclusive as it is dynamic. We are an Equal Opportunity Employer and are committed to providing a workplace free from discrimination and harassment. We celebrate diversity and are dedicated to creating an inclusive environment for all employees.

Ready to take the next step in your career? Apply today and let’s build something great together at Larson!

CDL-A Truck Drivers No Touch Freight Earn $1,800-$2,050 Weekly!

Pay & Benefits:

• 
  
• Earn $94,000-$107,000 Annually
  
• $0.68-$0.72 CPM + $18 Per Stop, Starting Pay Based on Experience
  
• $5,000 Sign-On Bonus in 10 monthly payments for Experienced Drivers
  
• Monthly Performance Bonus of $0.03 CPM
  
• Unlimited Driver Referral Program ($2,000-$3,000 per referral, paid out over 180 days)
  
• Paid time off after 1 year, plus 6 paid holidays after 90 days
  
• Medical, Dental, Vision, Life Insurance, 401(k)
  
• Late-Model Trucks
  
• Paid Online Orientation
  

Job Details:

• 
  
• Home Weekly
  
• No Touch Freight
  
• Dedicated Regional Account
  
• Reefer Trailers
  

Requirements:

• 
  
• Valid Class A CDL
  
• Minimum 6 months recent tractor-trailer experience
  

See where the road can take you when you drive for Hogan!

Hogan is family owned and operated with over 100 years of experience in the Transportation Industry. We continue a tradition of unparalleled, personalized service to clients and drivers. Hogan utilizes first-class equipment and advanced technology to help our drivers be successful. Drivers can expect a career embodied by safety, teamwork, professionalism, integrity, and the constant pursuit of excellence. Our nationwide network of dedicated opportunities allows drivers the opportunity to find predictable home time, competitive pay rates, and stable customer freight that best suits their needs. Our goal is to attract, recruit, and retain excellent employees that are passionately motivated to represent Hogans core values. If this sounds like you, apply today to join the Hogan team!

*Speak to a recruiter today for more details!

BENEFITS

• $1,000 90-Day Sign-On Bonus
• Medical & Vision Insurance
• Supplemental Insurance Plans Available
• Dental Insurance (Company paid)
• STD and Life & AD&D Insurance (Company paid)
• 401(K) Matching
• PTO & Unpaid Excused Absences
• Uniforms (Company paid)
• Training & Apprenticeship Opportunities
• Safety Shoe & Glasses Reimbursement Program
• Gym Membership Reimbursement Program

JOB SUMMARY

CNC Machinist III-Floor Bar operates and programs a floor bar CNC machine tool. This includes setting up and verifying tooling, setting part offsets, and programming computer-aided manufacturing (CAM) software. With little guidance, this person can complete a complex part from start to finish.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Performs safe operations by adhering to safety procedures and regulations.
• Observes machine operation to detect malfunctions or out-of-tolerance machining conditions.
• Operates and maintains machine according to work instructions.
• Takes precise measurements to verify program accuracy.
• Monitors and develops speed, feed, depth, and/or angle of cut during machining operations.
• Maintains clean work area and machine daily.
• Maintains workflow between shifts by documenting and communicating actions.
• Programs toolpaths with CAM software.

The above list reflects the general details describing the position's principles and essential functions. It shall not be construed as the only duties that may be assigned for the position. An individual in this position must successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.

MINIMUM QUALIFICATIONS

• 5+ years of experience as a CNC Machinist.
• Ability to operate and program 5-axis CNC machine tools.
• Previous experience machining various exotic materials and specialty tooling.
• CAM software experience.
• GD&T experience.
• Working knowledge of safety protocols.
• Has strong attention to detail and is self-motivated.
• Strong understanding of mathematics.
• Possesses leadership skills.

PREFERRED QUALIFICATIONS

• High school degree or equivalent.
• Apprenticeship or vocational training.
• Powermill experience.

PHYSICAL AND MENTAL DEMANDS

To perform the essential functions of this job successfully, an employee must meet the physical and mental demands described here. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

• Stand, walk, push, pull, reach overhead, and bend to the floor.
• Exert 1 to 25 pounds of force 75% of the time.
• Exert 26 to 50 pounds of force 20% of the time.
• Exert 50 plus pounds of force 5% of the time.
• Ability to read machine dial gages, blueprints, precision measuring instruments, and computer screens.
• Read English and understand sketches, routings, safety rules, operating and maintenance instructions, and procedure manuals.
• Communicate effectively with employees.

WORKING ENVIRONMENT

The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Indoor shop-based position.
• Moderate noise levels from operating machines.
• Physical hazards from moving equipment and machine parts.
• Machining fumes, dust, and mist.
• Skin exposed to oils and cutting fluids.

Compensation details: 35-50 Hourly Wage

PIdf21809d2fed-26289-38048829

About the Company

Great Lakes Roofing Corp. has been a trusted leader in the commercial and industrial roofing industry for over 40 years. We service customers across the upper Midwest offering custom, tailor-fit roofing solutions. We operate centered between 4 Pillars: Safety, Quality, Customer Service, and Employee Experience. Ask us about living our values; we walk the walk we talk. We're people-centric and believe in supporting our teammates. At GLRC you'll find encouraging coworkers who push you to find fulfillment and success both professionally and personally. Work-life flexibility means this next step on your career path will continue to meet your needs for many years to come. A laptop and headset will be provided; Microsoft Teams and Office 365 are used for internal communication. Paid training and supportive leadership will help you launch this local service branch.

About the Role

It's a great time to be a part of something Great! We're growing and looking for an Inside Sales: Appointment Setter (BDR) professional to support our commercial roofing customers across the Midwest. Who? An engaging, intrinsically motivated keystone for our sales and service team. Someone who values building relationships and proactively places outbound calls consistently creating the 'next opportunity'. Your leadership skills and successful appointment setting will set the pace. IF that sounds like YOU.... Apply today!

Responsibilities

• Generate lead flow - Prospect new sales leads via initial phone contact. As the spearhead of the sales team, you'll engage the account and prepare them for a visit from their trained Field Technician.
• Support current accounts – Stay in close contact with existing accounts or leads to cultivate brand trust. Answer calls and emails, identify the issue, and suggest product or service solutions.
• Branch Leadership – Fuel GLRC's presence in Iowa and grow your service team through a willingness to wear many hats, captivate potential, and thrive on independence.

Qualifications

• Outbound calling experience, and/or lead generation
• Polished listening skills to identify challenges that clients & prospects are facing, so we can deliver solutions.
• Attention to detail, ability to execute a process, and empower your sense of entrepreneurialism.
• Excellent written and verbal communication, and interpersonal skills for both internal and external recipients.

Required Skills

This is NOT a receptionist role. Your hunter efforts will convert leads into appointments for your Outside Sales partner. Your heightened sense of urgency will set the pace creating measurable results to reach (or exceed!) commission/bonus targets.

Preferred Skills

None specified.

Pay range and compensation package

Benefits for Inside Sales: Appointment Setter (BDR): Uncapped Commission, Flexible, hybrid schedule and casual office setting, Benefits like insurance, 401K, PTO, and more, Quarterly and Annual Bonuses... all on top of your base wage, which is paid weekly.

Equal Opportunity Statement

Great Lakes Roofing Corporation is an Equal Opportunity Employer.

Under the direction of the Engineering Manager, the Design Engineer is responsible for the support of new and existing products. This support may include, but is not limited to, product development, prototype generation, laboratory testing and problem solving, from concept to production.

ESSENTIAL DUTIES AND RESPONSIBILITIES

All employees work to satisfy the customer. Each department has expected core responsibilities, but these responsibilities do not define us. Rather, they simply provide a starting point where we work to satisfy the customer, and continuously improve ourselves, others, and the organization.

· Responsible for understanding the customer’s technical scope of work and delivering designs that meet or exceed expectations.

· Analyzes engineering sketches, specifications, data, drawings and models to determine design factors as well as tolerancing.

· Uses computer aided design tools for two- and three-dimensional magnetic analysis, computation fluid analysis, structural finite element analysis to develop and optimize designs.

· Designs for manufacturability

· Uses lab equipment such as force testers, multimeters, flow meters and environmental chambers to ensure products exceed customer requirements.

· Uses hand tool, soldering tools, and presses to build prototypes and customer evaluations

· Participates and/or leads design reviews and records meeting notes and lessons learned.

· Evaluates and approve design changes, specifications, and drawing releases to ensure compliance with both internal and external specifications and standards.

· Controls drawings, models, and other applicable documents.

· Shall utilize and improve engineering tools with the goal of creating and following consistent processes that ends with a predictable result. Examples of tools include Phase-Gate, FMEA, Control Plans, Engineering Change process, Tolerance Stack-up Calculations, Force Balances, Design for Manufacturing tools, Design Verification Plans, Process Validation, Capability Studies, Measurement System Evaluations, Quality Management and Production Part Approval Processes.

· Support sales staff by providing technical data to present to customers.

· Interface with other departments within and external customers and suppliers.

· Follows policies and procedures according to Quality Management System.

· All other duties as assigned.

Design Engineer

Behavioral

· Must have the potential to advance to Sr Design Engineer

· Proactive on tasks (Completes in a timely manner, uses tools to track task)

· Responsible (demonstrate that others can trust you)

· Demonstrates that he or she can be part of a solution (both technical and behavioral)

· Good verbal and written skills, in both a technical and non-technical environment

Demonstrated Competence:

· Good mechanical aptitude, and working knowledge of different materials (metals, plastics, etc.), coatings/finishes, and hardware.

· Good working knowledge of different manufacturing processes; CNC, injection molding, welding, turning, milling, etc.

· Good working knowledge of spring design

· Ability to support customer meetings and work directly with customers on design-related tasks.

· Ability to work with suppliers as it relates to prototype builds and associated changes and corrections.

· Able to design product(s) with input from others on lessons learned and best practices.

· Tends to work on projects, and not programs involving multiple designs and products.

· Participates in Root Cause analysis, DFMEAs, PFMEAs, Control Plans, Corrective Actions and other Quality activities.

· Understands the Cost of Goods (COGS) and how design impacts the material and manufacturing costs.

· Identifies design constraints and works with internal and external resources to resolve the constraints.

· Understands and utilizes all applicable processes and procedures.

Education and/or Experience:

· Bachelor's Degree (BS) from an accredited college or university in an Engineering related field or acceptable type and amount of work experience in a design role.

· 1-year design experience.

· Basic working knowledge of Microsoft Suite of products with a strong working knowledge of Excel.

· Demonstrated knowledge of SolidWorks or other 3D Modeling software.

· Experience with DFMEA, PFMEA, DOE, and other AIAG procedures preferred.

· Experience with magnetic analyses, computation fluid dynamics and finite element analysis preferred.

Why join AVIRE?

Do you have an entrepreneurial mindset? Do you like being part of high growth, high impact environments? Are you looking for an opportunity to lead a world class team intent on providing an unrivalled customer experience? If you have answered yes to these questions, we should connect!

The Avire Sussex, WI team is looking for a highly driven, highly motivated individual to take us to new heights. In this role, you will be responsible for planning, coordinating, and deploying the resources necessary to ensure our manufacturing capabilities grow with the organization focusing on continuous improvement--ensuring that our team is supported to effectively build high-quality products for our customers. Our assembly team is critical to our success as an organization as we produce high quality products that surpass customer expectations. You will be a part of a team of dedicated Production, Shipping and Receiving personnel, Supply Chain professionals, Technical Support Specialists, and Operations experts with the collective goal of supplying high quality products with a best-in-class lead-time exceeding our customer’s highest expectations. Further, you will be a part of a team that has a track record of delivering double digit compound growth while supporting each other. This position reports to the Operations Manager.

What you will do:

1. Sets clear, attainable production-level and cell-level production targets and direct the team to meet these objectives.
2. Manage daily production activities for the assembly cells including scheduling, production quality, material shortages and nonconformance reporting.
3. Manage the production employees, including performance management, health and safety, and individual training & development.
4. Work cross-functionally to ensure effective production processes and align resources to meet both customer & business demands.
5. Work directly with product management to ensure sustainable production for critical products while providing guidance to drive design for manufacturing/design for automation improvements. Facilitates new product integration and manages related engineering changes.
6. Build a culture of continuous improvement to ensure effective labor and materials management are engrained in everyday activities. Support continuous improvement initiatives and implement and evaluate outcomes.
7. Work directly with operational leadership to manage production requirements in alignment with business objectives & strategies and prepare monthly production reports.
8. Maintain production standards to ensure accurate labor reporting and costing.
9. Ensure compliance with local standards and maintains a safe working environment.
10. Perform other duties as assigned.

We want someone who displays:

Action-Oriented Curiosity: You readily take on challenges, and you identify and seize new opportunities. You have an outstanding history of delivering on your projects. You work on the problems that truly need solving, and you effectively challenge the organization to be better. You can cut through the clutter and focus on the priorities that align with organizational objectives.

Collaboration: You embrace the unique experiences, viewpoints, and abilities of your teammates and proactively engage those differences to come to the best possible outcome.

Empowerment: You thrive in an environment where you can make decisions. You do not shy away from taking a stand, and you recognize the importance of challenging the team to ensure that we strive for more. You take responsibility to solve customer problems the first time.

Accountability: You take responsibility for your actions, and you deliver on your commitments.

Inclusion: In all aspects of your work, you treat everyone with respect.

Performance Objectives

1. Cells are functioning effectively and team members are deployed in alignment with the needs of the business.
2. Lean principles are implemented and driven throughout the organization.
3. Performance management, including training & development, is process-driven and implemented consistently throughout the manufacturing team.
4. Plan production schedule and allocate resources to drive efficient, timely output, targeting improved productivity.

Job Skills

• Strong interpersonal and communication skills
• Proven problem-solving proficiency
• Proven ability to lead hourly employees in a manufacturing environment
• Experience in electronics manufacturing a plus
• Experience with KPI metric management and deployment
• Excellent written, verbal, and interpersonal skills to work effectively with diverse groups of people both within, and outside, of the organization.

Qualifications

• Bachelor’s degree in engineering, engineering management, supply chain or a related field
• A minimum of 5 years’ experience in a production environment holding positions of progressive responsibility
• Alternative combinations of education and experience will be considered
• A minimum of 3 years’ experience in a direct management position
• Strong interpersonal and communication skills at all organizational levels
• Strong decision-making skills and results-driven approach
• Proven analytical ability and familiarity with a KPI-driven operations environment
• Proficiency in Lean Principles a plus: Problem Solving, 5S, Flow, Standard Work, Kanban

Who is AVIRE?

Connecting and Protecting People. AVIRE combines 4 market-leading brands (Rath, Janus, Microkey, and Memco) within the elevator and emergency communications industries; currently offering light curtains, area of refuge, emergency telephones / GSMs, and life safety solutions. Each brand has a strong market presence, a unique identity, a distinct product range, and a long, successful history. The group has manufacturing locations in 2 countries, R&D in 2 countries and Sales & Marketing in 8 countries employing over 400 people globally.

AVIRE is part of the Halma group ( ). Halma bets on talent! We are looking for bright, ambitious people to join our team and stay for the long term. With over 50 businesses under its ownership, Halma is a great place to start, advance, or accelerate your career.

Benefits

• Competitive salary
• Organizational bonus plan
• Complete benefits package including health, dental & vision insurance, 401K, paid vacation, paid holidays, and generous parental leave
• Professional development training opportunities
• Company events (i.e. bbq’s, lunches, bowling and much more)!
• 4 x 10 hour schedule Monday – Thursday

Power Test®, LLC is an industry leader in the design, manufacture, and sale of dynamometers, heavy equipment testing systems and related data acquisition and control systems. For over 40 years, Power Test has provided specialized test equipment to manufacturers, rebuild facilities, and distributors in the mining, oil and gas, power generation, marine, trucking, construction, rail, and military markets in over 90 countries on six continents. Our headquarters and manufacturing operations are located in Sussex, Wisconsin with sales representatives worldwide.

Power Test Lifecycle Services is the aftermarket and services brand of Power Test, focused on maximizing customer uptime through genuine parts, remanufacturing, and lifecycle support. Specifically, Power Test PARTS focuses on serving the company’s customers by ensuring they have the right parts, at the right time, every time.

Position Summary

The Product Manager – Parts & Remanufacturing owns both the Parts and Remanufacturing product lines and is responsible for ensuring profit growth and achievement of revenue and margin targets. This role carries both commercial growth responsibility and operational fulfillment oversight, ensuring revenue expansion, margin performance, inventory discipline, customer responsiveness, and execution excellence. This leader operates at both strategic and tactical levels — defining pricing and growth strategy while ensuring quoting accuracy, order processing discipline, customer service performance, and fulfillment execution. The role ensures the fulfillment model (internal and external) supports customer uptime, availability, and growth initiatives. This position is essential to Power Test’s mission to serve its customers under the company’s dedication to “We Make it Better”.

Commercial Growth & Portfolio Ownership

• Own revenue, profit, and margin growth across Parts & Remanufacturing.
• Lead pricing strategy, margin optimization, and policy governance.
• Utilize sales and ERP data to identify incremental revenue opportunities

Sales Team Leadership & Capability Development

• Lead and manage the Aftermarket Parts Sales Team.
• Evaluate departmental capability gaps and implement structured development plans.
• Lead weekly department meetings focused on performance, backlog, and execution.

Operational Fulfillment Oversight

Deliver world-class performance in safety, quality, fulfillment, productivity, and cost.

• Own end-to-end order lifecycle execution
• Develop and execute the Parts Fulfillment Strategy, including:
• Lead parts stocking initiatives and inventory optimization efforts.

Required Qualifications

• Bachelor’s degree in business, Operations, Engineering, or related field.
• Understanding of capital equipment manufacturing environments.
• Minimum of 5 years’ experience in aftermarket parts, remanufacturing, service operations, or customer-facing commercial roles.
• Demonstrated experience owning commercial growth and operational execution within a product or business line.
• Strong cross-functional communication skills (written and verbal).
• Self-motivated with the ability to adapt in a fast-paced, evolving environment.
• Strong analytical capability with advanced data analysis skills.
• Advanced proficiency in Microsoft Excel (pivot tables, dashboards, financial modeling) at a minimum.
• Proven ability to balance analytical thinking with hands-on problem solving.

Benefits

What Makes Power Test Different?

At Power Test We Make It Better for our Customers, our Community, and our Employees. We provide industry leading products, work vigorously in our community, and encourage a healthy, financially rewarding, work-life balance for our employees.

Notably, Power Test has a broad based employee ownership program: Powered by Ownership. Powered by Ownership provides every employee an equity interest in the company. Powered By Ownership is more than just a benefit, it reflects Power Test’s commitment to building an ownership mindset across the company. Together, the team is strengthening culture, rewarding innovation, and shaping a future where success is shared. This mindset is captured in Power Test’s ownership slogan: Together We Build, Together We Prosper.