Jobs in Clinton, WA
242 positions found — Page 6
Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.
Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.
Verify that the correct materials and tools are issued and free from visible defects before starting work.
Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.
Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.
Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.
Retrieve and download CNC programs to the machine controller from the mainframe server.
Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.
Move finished parts and tools using appropriate material handling equipment as required.
Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.
Perform quality checks after each operation to ensure parts meet specifications and are free from defects.
Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.
~1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.
~ Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.
1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.
~ Experience working with and around hazardous materials (while using the proper protective equipment).
High school graduate or GED preferred.
Relocation:
~ Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
~ This position is for a variety of shifts.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing's Safety, Security, & Airworthiness (SSA) organization is seeking a Senior Systems Engineer – Compliance/Certification to join their Regulatory Administration System Oversight Team in Everett, WA .
The individual will have the opportunity to contribute to critical monitoring initiative and collaborate with industry – leading professional and regulatory agencies
Primary responsibilities:
- Leads the identification, analysis, and assessment of regulatory and contractual compliance of aerospace systems, products and services.
- Collaborate with internal and external stakeholders to define airworthiness and regulatory compliance requirements
- Reviews complex regulatory and customer requirements and develop monitoring strategies. (i.e. Certification)
- Leads analysis of regulatory and certification technical data for completeness and alignment to applicable regulatory and contractual requirements.
- Develop the planning and implementation of monitoring strategies.
- Research, investigates and monitors compliance processes for achieving regulatory compliance and recommends and leads process improvements, risk and opportunities
- Engages with regulators on complex programs or initiatives to shape certification strategies, approaches, activities, and artifacts.
- Develops and reviews, complex compliance reports and documents in accordance with applicable requirements and regulations.
- Leads establishing and promoting global regulatory advocacy strategies, trainings, tools, and methods.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite in Everett, WA.
Basic Qualifications (Required Skills and Experience):
- 9+ years of related work experience or an equivalent combination of education and experience
- Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
- 8+ years of experience working across the certification value stream.
- Experience working in International Type Validation and/or Operational Certification
- 4+ years of experience with certification processes to comply with 14 CFR 21.93, 21.95 and 21.97
- Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
- Experience developing presentations and presenting to multiple levels of an organization
- Experience investigating and finding solutions to complex technical or regulatory issues
- Strong technical writing abilities
- Experience extracting and compiling data from multiple sources
- Experience with analytics tools including Tableau, SQL, R, and Python
Preferred Qualifications (Desired Skills and Experience):
- 8+ years of experience identifying key stakeholder project specific requirements and scope, then building and managing project plans
- 8+ years of experience in business intelligence/data analytics tools (Microsoft Power BI, Dashboards, SQL, Tableau, etc.)
- Experience with systems engineering and integration of complex systems
- Experience with Risk Management
- Experience with audit activities
- Experience with Functional Decomposition
- Firsthand experience with airplane requirements
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range : $129,700 - $174,80
Applications for this position will be accepted until Mar. 25, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
As a Composite Fabricator, you will play a vital role in ensuring the highest standards of quality and safety in the production of non-metallic components for our Airplanes. Your expertise will be essential in fabricating and assembling parts with precision, utilizing various methods and equipment while adhering to established safety protocols. You will be responsible for maintaining a safe working environment, ensuring that all processes meet rigorous quality specifications. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Fabricate, assemble, rework, repair, and finish a variety of non-metallic parts, tools, and assemblies to specifications using methods such as layup, foaming, bonding, molding, and drap forming.
Operate mixers, impregnating equipment, heat treaters, curing equipment, formers, presses, and ovens according to established procedures, as well as various cutting equipment for flat pattern cuts of composite materials.
Collaborate with Manufacturing and Engineering to provide input on design optimization for developmental and emergent projects.
Impregnate materials and cut fabrics to size using appropriate tools such as knives and shears.
Hand and machine finish parts to required tolerances, ensuring proper fit within completed assemblies.
Sand and polish molds to achieve smooth surfaces and wrap mandrels with impregnated materials to meet specifications.
Place vacuum bags over wrapped parts, test for leaks, and seal any identified leaks in pressure and vacuum bags.
Prepare and apply protective materials, lacquers, and parting agents to molds, forms, and dies.
Load, unload, and operate ovens, presses, and pressure bags during the curing process of parts and assemblies.
Drill, trim, seal, part-mark, sand, and edge break parts to meet production requirements.
Select and secure appropriate tools, fixtures, and equipment to accomplish assigned work.
Perform Total Preventive Maintenance (TPM) on equipment, including cleaning, oiling, greasing, and changing filters to maintain optimal operation.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
3 months or more with structure materials and processes including metals, composites, bonded and bolted joints.
~3 months or more experience accessing a database for details work instructions.
~3 months or more experience in composite fabrication.
~ Must be able to lift, push, pull up to 35 pounds frequently within an 8 hour shift.
~ Must be able to walk constantly throughout the workday; High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
As a Composite Fabricator, you will play a vital role in ensuring the highest standards of quality and safety in the production of non-metallic components for our Airplanes. Your expertise will be essential in fabricating and assembling parts with precision, utilizing various methods and equipment while adhering to established safety protocols. You will be responsible for maintaining a safe working environment, ensuring that all processes meet rigorous quality specifications. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Fabricate, assemble, rework, repair, and finish a variety of non-metallic parts, tools, and assemblies to specifications using methods such as layup, foaming, bonding, molding, and drap forming.
Operate mixers, impregnating equipment, heat treaters, curing equipment, formers, presses, and ovens according to established procedures, as well as various cutting equipment for flat pattern cuts of composite materials.
Collaborate with Manufacturing and Engineering to provide input on design optimization for developmental and emergent projects.
Impregnate materials and cut fabrics to size using appropriate tools such as knives and shears.
Hand and machine finish parts to required tolerances, ensuring proper fit within completed assemblies.
Sand and polish molds to achieve smooth surfaces and wrap mandrels with impregnated materials to meet specifications.
Place vacuum bags over wrapped parts, test for leaks, and seal any identified leaks in pressure and vacuum bags.
Prepare and apply protective materials, lacquers, and parting agents to molds, forms, and dies.
Load, unload, and operate ovens, presses, and pressure bags during the curing process of parts and assemblies.
Drill, trim, seal, part-mark, sand, and edge break parts to meet production requirements.
Select and secure appropriate tools, fixtures, and equipment to accomplish assigned work.
Perform Total Preventive Maintenance (TPM) on equipment, including cleaning, oiling, greasing, and changing filters to maintain optimal operation.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
3 months or more with structure materials and processes including metals, composites, bonded and bolted joints.
~3 months or more experience accessing a database for details work instructions.
~3 months or more experience in composite fabrication.
~ Must be able to lift, push, pull up to 35 pounds frequently within an 8 hour shift.
~ Must be able to walk constantly throughout the workday; High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation
Position Responsibilities
Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.
Locate work areas using drawings and electronic resources that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials for accuracy and suitability.
Determine and obtain the correct fasteners from PCA/MMO control per specifications.
Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.
Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.
Install and rework interior parts and assemblies, including carpets, stowbins, and seats.
Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.
Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.
Disassemble parts, deburr holes, and prepare surfaces for fastener installation.
Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.
Install fasteners in the correct sequence using appropriate tools, adhering to specifications.
Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.
Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.
Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications
1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.
1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1+ years of experience using hand and power tools
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.
Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.
Ability to use hazardous chemicals.
Preferred Qualifications:
1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 15, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation
Position Responsibilities
Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.
Locate work areas using drawings and electronic resources that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials for accuracy and suitability.
Determine and obtain the correct fasteners from PCA/MMO control per specifications.
Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.
Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.
Install and rework interior parts and assemblies, including carpets, stowbins, and seats.
Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.
Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.
Disassemble parts, deburr holes, and prepare surfaces for fastener installation.
Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.
Install fasteners in the correct sequence using appropriate tools, adhering to specifications.
Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.
Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.
Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications
1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.
1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1+ years of experience using hand and power tools
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.
Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.
Ability to use hazardous chemicals.
Preferred Qualifications:
1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 15, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
BCA In-Service Safety Organization is looking for a Mid-Level (Level 3) or Senior (Level 4) Airworthiness & Regulatory Specialist to join our team in Everett, Washington .
Are you passionate about safety and compliance? Would you like to contribute to the world’s safest transportation system?
As an investigator in the Boeing Commercial Airplanes (BCA) Safety and Compliance Investigations (S&CI) team, you will have the opportunity to work independently while leading teams tasked with performing detailed Root Cause Corrective Action (RCCA) investigations related to regulatory compliance issues. This activity enables program and functional leadership to understand the systemic root causes of compliance issues and implement effective corrective actions that contain the issue and prevent recurrence. This position offers exposure to all aspects of airplane certification across the airplane lifecycle. The importance of this function can’t be over-stated as you will contribute to Boeing product safety by maintaining and restoring compliance with regulatory requirements.
Investigations typically follow the Boeing Problem Solving Model (BPSM) process, which provides a structured approach to investigations. Engagement with company leadership, certification experts, and functional experts from across the company make this position highly invigorating. We have a close-knit group with dedicated mentors and RCCA experts available for consultation.
We value the ability to communicate complex technical issues with a large variety of audiences, to lead a group of diverse engineers and non-engineers, and to apply airplane level thinking to a variety of technical issues. As such, we are a valued resource to the broader Chief Aviation Safety Office (CASO), the programs we support, as well as executive leadership.
As a strong component to product safety and compliance, we recognize that a variety of different
thoughts, contributions, backgrounds and opinions are necessary in order to make the safest product we can.
We enjoy a good work-life balance, although occasional overtime may be required for urgent items.
Come join the BCA S&CI team to help ensure our products remain the safest form of travel available into the future!
Position Overview:
- For any identified issue related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances, the BCA S&CI team leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process.
- We coordinate closely with Boeing functional groups, management and executives, and suppliers to ensure all stakeholders are aligned with the investigation’s status and resolution.
- We work with the functional groups within Boeing to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.
- We coordinate closely with the Organizational Designation Authorization (ODA) to ensure the investigation write-up meets regulatory expectations.
- We partner with enterprise groups to continuously improve our processes and tools to ensure we are ready for the future of BCA and to ensure these processes are consistent with the greater Boeing Enterprise.
- Leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process for issues related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances.
- Coordinates closely with Boeing functional groups, management and executives, and suppliers to ensure all stakeholders are aligned with the investigation’s status and Resolution.
Basic Qualifications (Required Skills and Experience):
- Level 3: 6+ years of related work experience or an equivalent combination of education and experience
- Level 4: 10+ years of related work experience or an equivalent combination of education and experience
Preferred Qualifications (Desired Skills and Experience):
- Experience applying Root Cause Corrective Action (RCCA), or other similar rigorous problem/analysis/resolution, processes to engineering development and manufacturing/production efforts
- Experience with the commercial airplanes certification process
- Experience and familiarity with FAA processes and procedures and ODA and Applicant roles
- Experience working with FAA or other regulatory agencies
- Experience working in one or more of the follow aircraft systems: fuel, fire detection and extinguishment, hydraulics, environmental controls, mechanical flight controls, landing gear
- Pilot’s license or pilot experience
- Airframe & Powerplant (A&P) License
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range :
- Mid-Level (Level 3): $102,000.00 - $138,000.00
- Senior (Level 4): $127,500.00 - $172,500.00
#CASO
Applications for this position will be accepted until Mar. 19, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Company is seeking a Mid-level (Level 3) or Senior (Level 4) Airworthiness & Regulatory Engineer (Regulatory Compliance) to join our team in Everett, WA.
Are you passionate about safety and compliance? Would you like to contribute to the world’s safest transportation system?
As an engineer in the Boeing Commercial Airplanes (BCA) Safety and Compliance Investigations (S&CI) team, you will have the opportunity to work independently while leading teams tasked with performing detailed Root Cause Corrective Action (RCCA) investigations related to regulatory compliance issues. This activity enables program and functional leadership to understand the systemic root causes of compliance issues and implement effective corrective actions that contain the issue and prevent recurrence. This position offers exposure to all aspects of airplane certification across the airplane lifecycle. The importance of this function can’t be over-stated as you will contribute to Boeing product safety by maintaining and restoring compliance with regulatory requirements.
Investigations typically follow the Boeing Problem Solving Model (BPSM) process, which provides a
structured approach to investigations. Engagement with company leadership, certification experts, and functional experts from across the company make this position highly invigorating. We have a close-knit group with dedicated mentors and RCCA experts available for consultation.
We value the ability to communicate complex technical issues with a large variety of audiences, to lead teams comprising of multiple disciplines, and to apply airplane level thinking to a variety of technical issues. As such, we are a valued resource to the broader Chief Aviation Safety Office (CASO), the programs we support, as well as executive leadership.
As a strong component to product safety and compliance, we recognize that a variety of different
thoughts, contributions, backgrounds and opinions are necessary in order to make the safest product we can.
We enjoy a good work-life balance, although occasional overtime may be required for urgent items.
Come join the BCA S&CI team to help ensure our products remain the safest form of travel available into the future!
Position Overview:
- Leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process for issues related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances.
- Coordinates closely with Boeing functional groups, management and executives, and suppliers to ensure all stakeholders are aligned with the investigation’s status and resolution.
- Works with the functional groups within Boeing to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.
- Coordinates closely with the Organizational Designation Authorization (ODA) to ensure the investigation write-up meets regulatory expectations.
- Partners with enterprise groups to continuously improve our processes and tools to ensure we are ready for the future of BCA and to ensure these processes are consistent with the greater Boeing Enterprise.
Basic Qualifications (Required Skills and Experience):
- Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
- Level 3: 5+ years of related work experience or an equivalent combination of education and experience
- Level 4: 9+ years of related work experience or an equivalent combination of education and experience
- Excellent written and verbal communication skills
- Experience managing and/or leading a team either formally or informally, with the ability to provide guidance, mentorship, and support to team members
- Experience leading cross-functional teams
- Ability to take ownership of work activities to ensure they are completed accurately and efficiently
Preferred Qualifications (Desired Skills and Experience):
- Master's degree in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
- Experience analyzing and presenting data
- Experience in a role developing, leading, and executing projects and utilizing project processes / skills
- Experience with aircraft design, certification, integration, or related field
- Experience do you have in customer relationship development, promoting long term account plans, and growing trusting relationships
- Experience with the commercial airplanes certification process
- Experience and familiarity with FAA processes and procedures and ODA and Applicant roles?
- Experience do you have working in one or more of the follow aircraft systems: fuel, fire detection and extinguishment, hydraulics, environmental controls, mechanical flight controls, landing gear
- Pilot’s license or pilot experience
- Airframe & Powerplant (A&P) License
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range :
- Mid-Level (Level 3): $114,750.00 - $155,250.00
- Senior (Level 4): $141,100.00 - $190,900.00
#CASO
Applications for this position will be accepted until Mar. 19, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Location- Everett, WA
Duration-6 Months
Shift:
* 1st Shift
* Expected Overtime (including weekends)
* No Travel Required
Job Description: 777-9 program is looking for Manufacturing Engineers to enable
aircraft modifications to support Certification Flight Testing for Type Inspection Authorization (TIA).
This is a very critical activity in support of the overall Certification of the 777-9.
Primary Responsibilities:
* Tiger Team Member on critical client Flight Test Project
* Installation Plans for configuration changes (test specific and production)
* Coordination across ME teams for PRR IP creation / revision
* Review IPs for quality - e.g. missing functional tests, missing BOM items, etc.
* Identifying and planning removals
* Identifying opportunities to reduce scope (e.g. smaller, more specific functional tests)
* Reviewing tooling requirements for compatible with flightline operations (i.e. not factory specific)
Basic Qualifications:
* Assembly & Installation (A&I) Manufacturing Engineering (ME) Skill Code 67B
* Levels: 3
Preferred Qualifications:
* Systems, Electrical and Propulsions are preferred (not required)
* CMES, PDM, CAPP, CMES (IP edit and NCO generation), ENOVIA, CATIA, IVT, Etc.
* Change incorporation instructions (e.g. PRR, LCCX, mods / service bulletins), removals, and 777 airplane configuration knowledge
As a CenterWell Home Health nurse, reporting to the Clinical Manager, you will provide personalized, one-on-one care that helps patients regain independence in the comfort of their homes. Working with a dedicated team of physicians and clinicians, you'll manage care plans that support recovery and help patients get back to the life they love.
As a Home Health Registered Nurse, you will:
- Provide skilled nursing care to patients, working onsite in their homes, including administering medications, performing wound care, and conducting patient assessments.
- Develop and implement individualized care plans in collaboration with physicians and other healthcare professionals.
- Monitor patients' conditions and report changes.
- Educate patients and their families on disease management, medication, and treatment options.
- Maintain accurate records of patient care and coordinate with other healthcare professionals.
- Report patient care and condition progress to patient's physician and Clinical Manager.
- Oversee the work of Home Health Aides and monitor their appropriate completion of documentation.
Use your skills to make an impact
Required Qualifications:
Diploma, Associate or Bachelor's Degree in Nursing
Med surg, ICU, ER, or acute experience
Current and unrestricted Registered Nurse licensure
Current CPR certification
Experience collaborating with a team of healthcare professionals
Valid driver's license, auto insurance and reliable transportation
Preferred Qualifications:
One year nursing experience
Home Health experience
Pay Range
• $63.00 - $88.00 pay per visit/unit
• $92,600 - $127,400 per year base pay
Additional Information
TB Statement:
This role is considered patient facing and is part of Humana's Tuberculosis (TB) screening program. If selected for this role, you will be required to be screened for TB.
Driving Statement:
This role is part of Humana's driver safety program and therefore requires an individual to have a valid state driver's license and are expected to maintain personal vehicle liability insurance. Individual must carry vehicle insurance in accordance with their residing state minimum required limits, or $25,000 bodily injury per person/$25,000 bodily injury per event /$10,000 for property damage or whichever is higher.
Scheduled Weekly Hours
32Pay Range
The compensation range below reflects a good faith estimate of starting base pay for full time (40 hours per week) employment at the time of posting. The pay range may be higher or lower based on geographic location and individual pay will vary based on demonstrated job related skills, knowledge, experience, education, certifications, etc.
Description of Benefits
Humana, Inc. and its affiliated subsidiaries (collectively, “Humana”) offers competitive benefits that support whole-person well-being. Associate benefits are designed to encourage personal wellness and smart healthcare decisions for you and your family while also knowing your life extends outside of work. Among our benefits, Humana provides medical, dental and vision benefits, 401(k) retirement savings plan, time off (including paid time off, company and personal holidays, volunteer time off, paid parental and caregiver leave), short-term and long-term disability, life insurance and many other opportunities.About Us
About CenterWell Home Health: CenterWell Home Health specializes in personalized, comprehensive home care for patients managing a chronic condition or recovering from injury, illness, surgery or hospitalization. Our care teams include nurses, physical therapists, occupational therapists, speech-language pathologists, home health aides, and medical social workers – all working together to help patients rehabilitate, recover and regain their independence so they can live healthier and happier lives.About CenterWell, a Humana company: CenterWell creates experiences that put patients at the center. As the nation’s largest provider of senior-focused primary care, one of the largest providers of home health services, and fourth largest pharmacy benefit manager, CenterWell is focused on whole-person health by addressing the physical, emotional and social wellness of our patients. As part of Humana Inc. (NYSE: HUM), CenterWell offers stability, industry-leading benefits, and opportunities to grow yourself and your career. We proudly employ more than 30,000 clinicians who are committed to putting health first – for our teammates, patients, communities and company. By providing flexible scheduling options, clinical certifications, leadership development programs and career coaching, we allow employees to invest in their personal and professional well-being, all from day one.
Equal Opportunity Employer
It is the policy of Humana not to discriminate against any employee or applicant for employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or protected veteran status. It is also the policy of Humana to take affirmative action, in compliance with Section 503 of the Rehabilitation Act and VEVRAA, to employ and to advance in employment individuals with disability or protected veteran status, and to base all employment decisions only on valid job requirements. This policy shall apply to all employment actions, including but not limited to recruitment, hiring, upgrading, promotion, transfer, demotion, layoff, recall, termination, rates of pay or other forms of compensation and selection for training, including apprenticeship, at all levels of employment.
