Jobs in Clayton Georgia Remote

TITLE:  Shift Leader (SL)

PURPOSE OF THE POSITION:  The person holding this supervisory position is considered a part time team member and is responsible and accountable for:  the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives.  The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager.  In restaurants with an Assistant Manager, the Shift Manager is the next highest position.

ESSENTIAL FUNCTIONS:  The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful.  These accountabilities are organized according to our six Key Result Areas.

When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the “Document Viewer” on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant.  The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards.

I. PROFITABILITY

A.Planning

1.Executes the RGM’s plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth.

2.Achieves planned/budgeted profits, as communicated by the RGM.  This involves:

- a.Using established control systems and procedures to measure actual results and to identify deviations from planned results.
- b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan.

B.Policies:  Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance.

C.Manages and Controls Cash:  In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized.

1. Performs Banking Transactions

- a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.)
- i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund.
- ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day.
- iii. The final deposit will be all remaining cash plus checks, minus the change fund.
- iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository.
- v. Assure the “Weekly Deposit Log” is completed for each deposit made.
- b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers.
- i. Picks up validated deposit slips at the bank.
- ii. Verifies bank validated deposit amounts to sales and cash reports as well as the “Weekly Deposit Log,” and assures all appropriate signatures are on the “Weekly Deposit Log”.
- iii. Sends a copy of the “Weekly Deposit Log” to the Home Office with all other weekly paperwork.

D.Controls cash drawers and team member “banks”, following all established manual and computer procedures.

1. Establishes the correct number of cash drawers.  Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer.  Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until “dropped” from the cash drawer to the safe.
2. Establishes cash banks for delivery drivers.
3. As needed, will operate cash drawer following established procedures for cash drawer operation.
4. As necessary, money is removed from cash drawers from time to time and secured in the safe.
5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office.
6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers.
7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions.
8. Inform the RGM anytime cash short exceeds $5 for a day.
9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents.  This requires due diligence on the part of the managers.

E.Assists the RGM in Managing and Controlling Cost of Sales:  The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet.   This includes these processes:

1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant.

2.Properly accepts deliveries and properly stores inventory items used in the restaurant.  This involves these processes:

- a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. 
- b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products.  Weight of items varies from 10 to 50 pounds.  Full load on two-wheeled hand truck may exceed 500 pounds.  Generally, ensures that more than one person is available to perform this task. 
- c.“Autoposts” inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip.

3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant.

4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products.

5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made – Ready – Discard label.

6.Assures the correct order entry procedures are followed by all order takers.

7.Assures compliance with team member consumption policies.

8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines.

9.Communicates goals to team members and follows up with team members to ensure goals are being met.

10.The following tools are used to aid in controlling Cost of Sales:

- FMS Product Cost Analysis Report
- FMS Daily Ideal Usage Report
- FMS Weekly Worksheet Report
- Bonus Calculation Sheet
- Profit and Loss Statement
- The General Ledger
- Prep Variance Report
- Daily Prep Variance Report

F.Assists the RGM in Managing and Controlling Cost of Labor:  Ensures that “Flow-thru” targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized.  This includes these processes:.

1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals.  Updates team member records as needed.

2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly    clock in at the beginning of their shift and clock out at the end of their shift.

3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift.

4. Assuring the man-hours used for opening and closing the restaurant do not exceed   established targets.

5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift.

6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations.

7.Making appropriate recommendations to the RGM regarding wages within Company guidelines.

8.Eliminating overtime hours for team members who are paid on an hourly basis.

9.Eliminating supplemental tip credit pay.

10.Improving team member productivity using the measurements and tools available through the Company, as well as the following:

- Assuring the Back of the House (BOH) is “optimized”:
- i. Organized … a place for everything, and everything in its place
- ii. Lineal Flow … eliminate or minimize back tracking
- iii. Have all items located closest to the next step in the product assembly process
- iv. Minimize the number of steps taken and the reach needed for all items
- Assuring that team members are thoroughly trained.
- Ensuring that “prep levels’ are adequate for the forecasted volume of business for the day, including:  products thawing/tempering; raw product prep; preassembled pizza and other products; and so on.
- Ensuring that food preparation areas, make table, cut table, and service areas are stocked appropriately before each shift and maintained during peak volume periods.
- Ensuring products are prepared quickly in accordance with time standards.
- Ensuring that tables vacated by customers are cleared, cleaned, sanitized and reset quickly.

11. Reduces turnover by managing all aspects of the restaurant professionally and in accordance with Company standards.

12. If the RGM has delegated scheduling to the Shift Manager, the Shift Manager uses established procedures to produce a sales forecast to be used in the scheduling process.

G.Managing Other Operating Expenses and Semi-Variable Expenses to Budget or less.

II. CUSTOMER SATISFACTION

A.Maintains positive customer relations, which includes:

1. Assuring personal behaviors and team member behaviors toward all customers are courteous, attentive, respectful, and enthusiastic.

2. Assuring a comfortable environment for customers.

3. Executing "Floor Management" by directing activities and greeting and interacting with customers on each shift worked.

4. Immediately resolving customer complaints by apologizing first and then assuring the satisfaction of the customer.  Complaints may be received in person, by phone, or in writing.  Consult with the RGM if the customer is not satisfied with your suggested resolution.

- a. B.L.A.S.T. is the acronym we use for our complaint resolution process:
- Believe the customer
- Listen to the customer
- Apologize to the customer
- Satisfy the customer
- Thank the customer

5. Immediately contacting the RGM (or DM if the RGM is not available immediately) regarding any incidents in which customers are injured or in which customers claim some harm done to them.

B. Ensures customers receive prompt, quality service.  This includes:

1. If the RGM has delegated scheduling to the Shift Manager, scheduling the correct number of team members for forecast sales volume; and deploying those Team members in the correct job roles.
2. Following established service guidelines and procedures to assure all Hospitality Standards are achieved.
3. Directing team member activities to assure speed of service standards are met or exceeded, including product preparation times and delivery times. 
4. Personally serving customers as required to meet the demand of the volume of business.
5. Ensuring customers are greeted properly and seated as quickly as appropriate.
6. Recognizing and dealing effectively with the special needs of customers.
7. Ensuring that customer orders are taken promptly, prepared accurately, and served quickly.
8. Ensuring customer follow-up, which means servers check back with customers   frequently to see if there is anything else needed. 
9. Ensuring immediate attention is given to customers ready to pay, either by prompting servers to complete the table cashout procedure or by performing the transaction of cashing out customer as needed.
10. Ensuring the phone is answered promptly and courteously, following the Telephone Service Essentials.
11. Responding to customers at pickup counter and drive-thru window; finding order; collecting money for the order; verifying order to customer; and, thanking customers.
12. Dispatching orders for delivery customers as required to meet the demands of the volume of business, grouping orders by geographical destination and instructing drivers as they arrive and depart which orders to take with them and where to go.
13. Delivering pizzas as necessary to meet the demands of the business.
14. Ensuring customers are thanked for their business.

C.Ensures quality ingredients are used to prepare all products.  This includes:

1. Maintaining Food Safe Temperatures for all ingredients and products.
2. Ensuring food preparation utensils and food contact surfaces are property cleaned and sanitized.
3. Ensuring that procedures for receiving, handling and storing ingredients are followed.
4. Recognizing and correcting any raw ingredients or product problems.
5. Maintaining inventory levels which assure product freshness and no outages.
6. Eliminating the potential for cross contamination.
7. Ensuring that proper procedures are followed to prepare ingredients (dough, sauces, meats, cheeses, and vegetables).
8. Ensuring salad bar is maintained according to standards of operation (restaurant only).
9. Personally preparing ingredients as necessary.

D. Ensures quality products, which includes:

1. Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
2. If deemed appropriate by the RGM, performing a product cookability test to verify proper oven and belt speed.
3. Following proper procedures to process customer orders.
4. Personally preparing and cooking menu items as required to meet the demands of the volume of business.
5. Taking every appropriate action, in consultation with the RGM, including driving to another restaurant to pick up product, to resolve outage or potential outage situations. 
6. Maintaining inventory levels which assure product freshness and no outages.
7. Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
8. Assuring all products are prepared according to exact specifications, recipes and procedures.
9. Personally preparing and cooking menu items as required to meet the demands of the volume of business.

E.Ensures that all standards for cleanliness and sanitation are met or exceeded, with particular attention to:

1. Restrooms.
2. Table tops; booth backs and seats; and chair seats.
3. Silverware, plateware, and glassware.
4. Dining room floors.
5. Salad bar.

F.Implements new or approved changes in policies, procedures and/or operation standards.  This involves:

1. Attending training sessions.
2. Reading "Rollout Guides" or other resources.
3. Assisting the RGM with training restaurant team members of new procedures or changes.
4. Participating in crew training and other actions in the restaurant to assure full and correct implementation.
5. If requested by the RGM, assisting with updating all manuals, resources and job aids as required.

III.PEOPLE

A.Maintains positive team member relations and a positive and productive workplace, which involves:

1. Building relationships with team members based on mutual trust and respect.
2. Communicating and following the Daland “5 Star” Vision and Core Beliefs.
3. Promoting teamwork.
4. Being familiar with benefits available to team members, and referring appropriate questions to the RGM regarding these benefits.
5. Informing the RGM of all team member grievances.
6. Performing correct and consistent administration of team member disciplinary procedures, and discussing all recommended discipline with the RGM.
7. Assuring compliance with various governmental regulations, such as ensuring that all team members are clocked in while working, complying with overtime laws, child labor laws, alcoholic beverage laws, anti-discrimination and anti-harassment laws, FLSA, EEO, etc.
8. Performing consistent administration of and compliance with Company policies and procedures.
9. Communicating effectively with the crew and management team.
10. Assuring team member understanding of the Daland Corporation organization structure and career opportunities within the Company.

B. Assists the RGM with managing the size and quality of staff.  The following are responsibilities of the RGM, but if requested by the RGM, the Shift Manager may assist with the following:

1. Planning, recruiting, and hiring to assure a full staff at all times and to assure adequate time for processing MVR's (motor vehicle reports), background checks, etc.  Only the RGM is authorized to hire new team members; and Shift Managers are only permitted to interview applicants if authorized by the RGM.
2. Continuously recruiting and taking applications from job candidates.
3. If requested by the RGM, utilizing staffing tools, such as the Pizza Hut Hiring Zone and the team member Assessment; interviewing job candidates; and, checking their references.
4. If requested by the RGM, making recommendations to the RGM regarding the best qualified candidates.
5. Complying with Company employment practices and governmental regulations, including EEO, ADA Title I, etc.

C.Assisting the RGM in training newly hired team members and team members preparing for promotions.  This involves:

1. Following Company training policies and meeting Pizza Hut Training Standards.
2. Utilizing on-line training, trainer's guides, checklists, job aids, tests and other training resources to assure a thorough job of training.
3. Using the four step training process of:  (1) Preparation (2) Show & Tell; (3) Guided Practice; and (4) Follow-up to assure the trainee can perform all tasks up to required standards prior to being allowed to perform the tasks "solo."

D. Manages team member performance and supervises work.  This includes:

1.Utilizing Coaching for Results, which includes:

- a.Activating team member behavior.
- (1)Providing guidance, direction, and reassurance to all team members.
- (2)Communicating non-negotiable standards of performance to team members.
- (3)Conducting team member meetings, group training sessions and Jump Start meetings.
- (4)Assigning Team members tasks from the Opening, Closing and Maintenance checklist. 
- (5)Communicating job assignments for each shift to team members and assuring each team member works their assignment.
- (6)Giving instructions to team members that are clear and assure understanding.
- (7)Assigning team members to breaks.
- (8)Sending team members home early if not needed due to business conditions.
- (9)Calling team members in early, or calling extra team members to work to cover unanticipated surges in business volume.
- (10)Assuring all opening, shift, and closing job duties are completed and performed correctly.
- b.Evaluating team member behavior.
- (1)Observing team member performance each shift.
- (2)Working along side team members and assisting in the performance of their tasks, as needed.=
- (3)Monitoring team member meals and signing team member meal guest checks.
- (4)Ensuring adherence to alcoholic beverage laws of the local community
- (5)Conducting regular, written performance appraisals on all subordinates, using the procedure and forms provided by the Company and within the time specified in compensation plans.
- c.Responding to team member behavior with consequences.
- (1)Taking action (corrective or positive reinforcement) to assure team member performance meets or exceeds standards.
- (2)Providing ongoing counseling that gives praise and recognition to team members for jobs well done; identifies areas of performance needing improvement and methods for improving; and, if required, gives reprimands that are job focused.

2.Handling non-routine occurrences/emergencies and informing the RGM of such occurrences/emergencies.

E. Assists RGM with developing promotable team members in his/her restaurant and promotable management for Daland.  This includes:

1. Using Company training programs and resources to prepare candidates for promotions and to assure that the management team is 100% certified in management processes, systems, policies, and procedures.
2. Making recommendations to the RGM regarding which team members are eligible for promotion to Shift Manager/Leader.

F. Assists RGM with personnel administration functions, which includes:

1. Assuring team members complete all required personnel documents such as W-4's, I-9's, Team member Acknowledgment, Arbitration Agreement, Delivery Driver Statement, New Driver Checklist, etc.; and, that these required documents are transmitted to the Home Office.
2. Documenting required payroll data for team members, including accurate recording of hours;
3. Managing worker's compensation claims, etc. in accordance with Company policies and procedures.
4. Maintaining personnel files on all team members, which includes filing all personnel documents; recording training dates, vacation dates, evaluation dates, pay increases, and absences; etc.

IV. MARKETING

A.Implements marketing programs to increase business.  This includes:

1. Engaging in positive community/public relations for Pizza Hut.
2. Providing input for promotional ideas.
3. Displaying and maintaining Point of Purchase (P.O.P.) and other elements of national, co-op or local marketing programs;
4. Properly executing authorized marketing programs, including new product tests.
5. Taking initiative to recommend new opportunities for increasing business.

V. FACILITIES

A.Maintains a quality environment for our customers and team members.  This includes:

1. Conducting routine Preventive Maintenance on the facility and equipment.
2. Taking corrective actions pursuant to the RGM’s safety inspections.
3. Advising the RGM regarding non-routine problems and following up to assure such problems are corrected.
4. Maintaining cleanliness and sanitation in all areas of the restaurant.
5. Organizing all work space to ensure ease of operation.
6. Providing a quality work environment that is safe and complies with all OSHA regulations.
7. Cleaning and organizing refrigeration units.  
8. Ensuring floors are clean and free from obstruction.
9. Keeping HVAC vents and filters clean.
10. Ensuring trash is disposed of promptly and according to security procedures.
11. Ensuring parking lot and grounds are free of trash and debris and taking action to correct deficiencies.
12. Ensuring all equipment is used according to proper operational procedures.
13. Keeping restrooms cleaned and stocked.
14. Keeping food prep areas cleaned and sanitized according to approved procedures.
15. Ensuring the daily cleaning and maintenance of all equipment.
16. Correcting any unsafe conditions.
17. Following up to ensure all Scheduled Maintenance and Daily CM&A items are completed.

VI. ADMINISTRATION

A.Effectively manages time, allocating an appropriate amount to each Key Result Area.

B.Manages all paperwork, documentation, written reports, etc. and assures these are always submitted on time and that they are accurate, complete and organized.

C.If requested by the RGM, orders inventory items used in the restaurant.  This involves these processes:

1. Review of the Inventory on Hand is performed.  The Inventory on Hand is compared to the Weekly Ideal Usage, which is obtained from the Product Cost Analysis report, and a determination is made as to the amount of each particular item to order.  The order is then recorded on an order sheet, or is entered into the computer for electronic transfer of order information.
2. Amount ordered of each item may be adjusted upward or downward based on projections of upcoming sales trends, coupon impact, weather changes or other extra-restaurant environmental changes.
3. Calls in orders for supplies on the phone, or electronically submits order via computer.

D.If requested by the RGM, conducts weekly inventory of all food, paper and beverage products used in the unit.  This involves these processes:

1. Physically reviewing and counting the inventory on hand (which involves climbing shelves, bending, kneeling, etc.).
2. Rearranging inventory to assure proper rotation (first in, first out) and to make it easier to count and control.
3. Recording amounts of inventory on hand on the inventory form.

E.If requested by the RGM, prepares the weekly labor schedules.  This involves these processes:

1. Updating Guest Check Comments file in the restaurant computer to assist in forecasting labor hours.
2. Reviewing Guest Check Comments file and upcoming promotions that may affect sales during the upcoming week.
3. Forecasting anticipated sales volume by shift, by day and by week.  The forecast is based on knowledge of any outside events that may influence sales such as coupons, promotions, etc.  Particular consideration must be given to how sales are generated--that is, dine-in business contrasted to carry-out business or delivery business.
4. Updating sales forecasts in the FMS (computer system) based on outside events that may influence sales.
5. Reviewing requests for days off that have been turned in by team members and when possible allowing for requested days off.
6. Using experience, past schedules, Black Book information, Guest Check Comments, knowledge of team members' abilities, labor goals, and FMS (computer system) recommended labor schedule to assist in scheduling the proper number of team members each shift to meet sales volume and labor hour guidelines.
7. Obtaining the RGM's approval of the schedule, then posting the final schedule in accordance with Daland Corporation's policies and procedures.

F.Performs daily accounting procedures.  This includes these processes:

1. At close of business day requests a sales report from the FMS computer to determine total sales entered into the cash drawers throughout the system.
2. Any cash paidouts or miscellaneous deposits from the day are verified with what is in the system.
3. Cash on hand is counted and reconciled against total sales.
4. Total deposit is calculated, and a deposit is prepared.
5. Dough waste and PPP waste is documented and calculated on the form provided and filed for use in forecasting future prep levels.
6. All gift checks are counted and verified against prior counts less current gift check sales on the Gift Check Tracking form.

G.If requested by the RGM, performs weekly accounting procedures.  This includes these processes:

1. Completing, as required, the Weekly Sales Analysis and analyzing it.
2. Completing the Weekly Inventory.
3. Completing the payroll functions.
4. Analyzing the Daily Business Summary Report to determine performance in key measurement areas.
5. Preparing the weekly packet for the home office, using the checklist provided to assure all required items are included.
6. Calling any needed FRS numbers or statistics to the District Manager.

H.Meets all deadlines and assures that subordinates meet their deadlines.

I.Manages all paperwork, documentation, written reports, etc. and assures these are always submitted on time and that they are accurate, complete and organized.

J.Maintains and updates required files, manuals, and reports.

NON-ESSENTIAL FUNCTIONS:  The "non-essential" functions are routinely performed by the person holding the Shift Manager's position and they are essential to the effective operation of the restaurant.  However, these functions are considered "non-essential" to the position. The Manager on Duty is then accountable for assuring the delegated functions are correctly performed.

A.Receives and stores inventory items used in the unit.  This involves these processes:

1. Checking in products as received off delivery vehicles to verify product quality and that amount charged for on the delivery receipt/packing slip is correct when compared to amount received.  Signing the delivery receipt/packing slips for amount of goods received.
2. Using a two-wheeled hand truck, assists and oversees other employees in proper storage of products.  Weight of items varies.  Generally, more than one person is available to perform this task.
3. Entering on inventory screen of the computer the amount and cost of each product item received as noted on the delivery receipt/packing slip.

MINIMUM QUALIFICATIONS/REQUIREMENTS:  The following are the qualifications and minimum requirements necessary for a person to perform this job.

A.Ability to work a minimum of three (3) days and at least 30 hours per week, but must be available to work more than 30 hours per week if necessary due to business necessity. In addition to having the flexibility to work a variety of shifts, including late nights and weekends.

B.Valid driver's license, insurance and automobile.  Position involves taking large amounts of cash receipts to the bank at different times of the day including at night.  Banks are generally at a distance requiring a person to drive to the bank. Position may also need automobile to pick up product, make pizza deliveries, etc.

C.Able and willing to travel.  Position requires occasional travel for training, new store openings and meetings, which may be held at a distance from home not feasible to drive daily.  Overnight stays at an out-of-town location may be required during the training sessions, new store opening, and meetings for up to one week at a time.

D.Telephone (cellular or land line) at residence.  There are circumstances that may arise at the restaurant of which the manager must be informed while off duty.

E.Sufficient physical agility to perform the functions of the position. This includes these processes:

1. Sufficient physical strength to lift most items used in the operation of the restaurant.
2. Sufficient communication skills.  Position involves communicating with team members, superiors and customers.  
3. Ability to move at a fairly quick pace and to remain stationary for periods of six to eight hours at a time.  The position requires person to perform all of the above at different times and intervals as needed by the realities of the environment and the position.

F.Ability to maintain a state of self-composure under conditions of stress and anxiety.  Position routinely involves stress resulting from work overload, role ambiguity, conflicting demands from various customers, and team members.  Person in this position must be able to function effectively under these conditions.

G.Previous experience with this Company as a Shift Manager/Leader; or previous restaurant management experience with another Company.

H.Sufficient mental and cognitive ability to perform the calculations and fill in the sales and product tracking forms used by the Company.  Estimate is that ability to read, write and perform arithmetic procedures at the 12th grade level will be sufficient.

I.Ability to perform all of the duties of the hourly team members and supervisors under this person's supervision.  As time and circumstances dictate the person in this position may have to assist or take over the duties of an hourly team member in order to expedite good customer service.  Also necessary in order to train new team members in this function.

J.Ability to communicate effectively with a large variety of persons with diverse backgrounds.  Position is one where incumbent provides direction and supervision to a variety of subordinates with diverse levels of education, differences in ages, and experience.  Must be able to express ideas and concepts to these persons to assure teamwork through organization and leadership.

EQUIPMENT USED:

Standard restaurant office equipment such as calculator, telephone, and computer.

"Pizza Wheel".  This is a device with a handle and a round stainless steel blade that is used to cut certain types of pizza dough crusts.

"Rocker Knife".  This is a device about two feet long with a stainless steel handle that extends across the top of a stainless steel blade fashioned in a curve.  It is used to cut certain types of pizzas by placing on the pizza and rocking the blade across the pizza surface.

"Vegetable Chopper".  This is a hand operated mechanical device used to slice whole raw vegetables into smaller pieces for use on the make table.

"Crock".  A generic term used to describe a variety of containers used to hold food items served on a salad bar.  Knives, spoons, spatulas and other common utensils.

"Make Table".  An open topped, refrigerated, compartmented table for the storage of food items used in the preparation of products for customer orders.  Has doors which allow access to interior refrigerated section below the table top where additional food items are stored as back-up for the items stored on top of the table.

"Cut Table".  A stainless steel table where cooked pizzas are cut into slices and where other products are assembled prior to serving them to the customer.

"Oven".  A power driven device operating at high temperatures used to bake food products.

"Automatic Dishwasher".  A mechanical device consisting of:  (1) a dirty dish/rinse table, used to rinse and prepare dishes for washing; (2) dishwasher compartment, where dishes are washed with hot water, soap, sanitizing chemical and pressurized water; and, (3) clean dish/drain table, where clean dishes drain, dry and are sorted for storage.

"Dough Proofer".  A metal cabinet heated to approximately 95 degrees Fahrenheit, in which panned dough is placed to obtain the correct rise in the dough.

"Three Compartment Sink".  A stainless steel sink, separated into three compartments used to wash, rinse and sanitize all kitchen tools, and smallwares not washed in the automatic dishwasher.

"Pan Gripper".  This is a mechanical device used to grip certain types of pizza pans for purposes of lifting or carrying when they have been heated to a high temperature.

"Portion Cups".  These are pre-measured cups used by Pizza Hut restaurants for portioning cheese and toppings for pizzas.

"Scales".  This is a small table model scale used to weigh and portion ingredients used in the recipes of various products.

"Pan Separators".  These are plastic items, of varying shape, diameter and circumference, used to separate pans filled with dough to protect the dough inside the pan from contamination and to allow pans to be stacked for storage.

"Dough Perforator".  This is a mechanical device consisting of a handle attached to a small wheeled drum that is dotted with metal protrusions.  It is used to perforate certain types of dough prior to topping to prevent formation of bubbles during baking.

"Cutting Board".  This is a hard surface board, rectangular or square in shape, on which pizzas and other food products are cut.

"Reach In".  A refrigerated piece of equipment with doors which open to allow dough or pizza ingredients to be stored inside for easy access.

"Scraper Block".  A device with a stainless steel blade and a wooden handle in a rectangular shape used to cut dough for portioning, and scraping the make table/cut table surfaces off for cleaning.

"Prep Table".  A table about 34 to 36 inches high, with a stainless steel top.  The table is used as a work surface for the preparation of many ingredient items used in the Pizza Hut.

“Kitchen and Dining Utensils".  Such as knives, spoons, spatulas, etc.

"Plates, Bowls, Mugs, Tumblers".  and other items to serve food and beverages to customers.

"Spoon".  A stainless steel device with a long handle and a curved end used for applying sauce to prepared dough.

"Pan".  A round metal device with a raised edge for holding dough prior to topping and baking.

"Walk-in".  A refrigerated compartment of sufficient size to allow the individual to actually walk into the refrigerated compartment to obtain or store perishable items.  Compartment may be sufficiently cold to freeze items.

"Freezer".  A refrigerated box maintained at sufficient cold temperatures so as to freeze items stored inside.

"Ice Machine".  A device that automatically receives water, freezes it, and stores it as ice in an attached storage bin.

"Soda Dispenser" (pop machine).  A device that mixes syrup and carbonated water and dispenses carbonated soft beverage (soda, pop).

"Point of Sale Computer".  Electronic device used in tracking orders, inventory, payroll information.  Contains cash drawer used to make change for customer transactions, track paidouts, delivery orders, dispatching.

"FMS"  Field Management System.  Software used on the point of sale computer that provides management information necessary in managing the day to day operations of the restaurant.

Miscellaneous equipment such as a telephone, carry-out boxes and bags, hand towels, etc.

Serving tray, ticket book, bus tub, flatware and other small items.

Note:  Many restaurants have additional equipment such as beer boxes, spaghetti magic machine, etc.

PLACES WHERE WORK IS PERFORMED:  This work is performed on the employer's premises.  Location of premises may vary throughout the employer's Company.  This job description was developed by observing the work in process and from information provided by the management of Daland Corporation.

Pizza Hut
- Clayton is looking for hardworking and passionate individuals to join our restaurant as a full time or part time server.

As a restaurant server, providing the customer with a memorable experience is key, and your role will be integral in making that happen.

You'll be expected to answer menu questions, manage multiple tables, and support the rest of the FOH staff during your shifts.

Being able to handle unique problems as they arise? A major bonus.

Our restaurant servers should make all of our guests feel comfortable and make recommendations you genuinely feel that your guests will enjoy.

Pizza Hut
- Clayton is located in Clayton, GA.

This job is full time or part time.

At Pizza Hut
- Clayton, we're looking for enthusiastic individuals to join our front of house team as a full time or part time waiter/waitress.

By joining our wait staff, you'll be expected to educate patrons on the menu, guide them through their meal, and provide a memorable experience.

At Pizza Hut
- Clayton, being able to think quickly, take problems in stride, and work well as part of a team is a must.

Waiters/waitresses should learn the menu and continually educate themselves on specials.

A successful waiter/waitress will handle complaints with patience and grace.

Pizza Hut
- Clayton is located in Clayton, GA, and this job is full time or part time.

Apply now!

¿Por qué entregar con DoorDash?

DoorDash es el líder número uno de la categoría en entregas de comida, retiro de comida y entregas de tiendas de conveniencia en EE. UU., con la confianza de millones de clientes todos los días. Como Dasher, tendrás múltiples oportunidades de ganancias y podrás trabajar cuando te convenga. Ya sea que busques un trabajo adicional o a tiempo completo, entregar con DoorDash te brinda la oportunidad de ganar dinero extra bajo tus propios términos.

• Varias formas de ganar:ya sea que entregues comidas, comestibles u órdenes minoristas, DoorDash ofrece diversas oportunidades de ganancias para que maximices tu tiempo.
• Flexibilidad total:haz dashes cuando te convenga. Establece tus propios horarios y trabaja tanto o tan poco como quieras.
• Sabes cuánto ganarás:un modelo de pago claro y conciso te permite conocer el monto mínimo que ganarás antes de aceptar cualquier oferta.
• Flujo de dinero instantáneo:recibe el pago el mismo día que haces un dash con DoorDash Crimson*, sin tarifas de depósito ni esperas.
• Comienzo rápido y sencillo:regístrate en minutos y sal a hacer dashes rápidamente.**
• Proceso simple:solo recoge, entrega y cobra. Ten tu día de pago siempre en el bolsillo.

Requisitos básicos

• Mayor de 18 años*** (mayor de 21 para las entregas de alcohol)
• Cualquier auto, ciclomotor o bicicleta (en algunas ciudades)
• Número de licencia de conducir
• Número del seguro social (solo en EE. UU.)
• Acceso consistente a un teléfono inteligente

Cómo registrarse

• Haz clic en “Registrarse y postularse ahora” y completa el proceso de registro.
• Descarga la aplicación Dasher de DoorDash y comienza a hacer dashes.

*Sujeto a los requisitos de elegibilidad y a una verificación de identidad exitosa. La cuenta de depósito DoorDash Crimson es establecida por Starion Bank, miembro de la FDIC. La tarjeta de débito Visa® DoorDash Crimson es emitida por Starion Bank.

**Sujeto a elegibilidad.

***Debes ser mayor de 19 años en Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, Nueva Jersey, Nuevo Mexico, Texas, Utah y Virginia del Oeste.

Información adicional

Hacer dashes con DoorDash es una gran oportunidad de obtener ganancias para cualquier persona que busque un trabajo de entregas a medio tiempo, estacional, flexible, los fines de semana, después de la escuela, temporario o estable. Entrega con DoorDash y gana dinero extra mientras te conviertes en tu propio jefe. Haz dashes cuando más te convenga. Regístrate hoy.

Remote working/work at home options are available for this role.

Description

:Overview of Unit/Department

Expand your healthcare knowledge and experience while maintaining your skills at the bedside. Consider joining our team in a hybrid position in a cross training role which includes both bedside nursing shifts and an opportunity to grow new skills as a virtual nurse. Our Virtual Nursing Command Center is full of advanced technology that gives our patients an extra level of monitoring from admission to discharge. Our virtual nurses are centrally located in the Virtual Command Center at Cox South. They use this technology to support our bedside RNs with tasks to make lighten their workload as well as monitor patient’s vital signs, assist with admissions and discharges, and collaborate with our virtual physicians, pharmacists, respiratory therapists, and Early Intervention Team! If you are on the search for a new way to expand your nursing knowledge come and give Virtual Nursing a go!

Additional Information About the Position for Qualified Candidates

•Up to $6,00.00 Sign-On Bonus
• Up to 40 hours of front-loaded Paid Time Off
• Up to $3,000 Relocation bonus
• $1.00 Certification pay
• $1.00 BSN pay
• Career Ladder Bonus eligible up to $5,000.00

Job Summary
The Medical-Surgical nurse is responsible for managing the care of the adult or geriatric patient experiencing general medical conditions or general surgical procedures. The nurse must be able to assess patient condition, administer medications, change dressings, monitor vital signs, keep records and provide patients and families with support and education. The Medical-Surgical nurse maintains a wide array of medical care knowledge in order to care for a diverse group of patients. The hybrid virtual eAcute nurse will work at least one shift per pay period as an eAcute Virtual Med surg nurse and the remainder of shifts as a bedside nurse. The eAcute Virtual Med-Surg nurse is a pivotal member of the healthcare team to assist with managing the care of the adult or geriatric patient experiencing general medical conditions or general surgical procedures. The virtual nurse will assist with tasks such completing the admission and discharge process, care plan development and maintenance, patient education, medication and discharge teaching, care coordination, mentoring of new nurses, and implementation of evidence-based care. The virtual eAcute nurse assists the primary bedside nurse with nursing tasks not required to be done in person as well as real-time quality and patient safety surveillance. The eAcute Virtual Med-Surg nurse maintains a wide array of medical care knowledge in order to care for a diverse group of patients. Virtual training begins after successful 12-week orientation period as bedside nurse.Education: ▪ Required: Graduate of an accredited nursing program or NLN approved program ▪ Preferred: Bachelor’s Degree in Nursing
Experience: ▪ Required: At least two years’ nursing experience ▪ Preferred: Preceptor and Charge nurse experience
Skills: ▪ Accountable and responsible for own safe clinical practice ▪ Basic computer skills and knowledge ▪ Excellent customer service skills ▪ Thrives in rapidly changing environment ▪ Self-motivated ▪ Excellent verbal and written communication skills ▪ Demonstrate effective leadership abilities ▪ Exhibits valuable time management skills ▪ Strong critical thinking/problem solving skills. ▪ Flexibility and ability to work in a multi-tasking environment.
Licensure/Certification/Registration: ▪ Required: RN license active in the state of Missouri
Remote working/work at home options are available for this role.

Life Insurance Signature / Authority Limits $5M Signature / $7.5M Authority PLEASE NOTE: ONLY APPLICANTS WITH INDIVIDUAL LIFE UNDERWRITING EXPERIENCE WILL BE CONSIDERED FOR THIS ROLE.

PLEASE NOTE: ONLY APPLICANTS WITH INDIVIDUAL LIFE UNDERWRITING EXPERIENCE WILL BE CONSIDERED FOR THIS ROLE.

Job Summary Builds relationships with Financial Advisors and internal partners.

Develops the skills necessary to successfully underwrite Life, Disability, and/or Long-term Care insurance policies in an inclusive and fast-paced environment ensuring all quality, service and production goals are met.

Primary Duties & Responsibilities Field & Client Experience.​Responsible for credible and effective relations and communication with field and customer to include responding to case appeals/inquiries and assists with placing business.Provides guidance and assistance to the Northwestern Mutual Financial Network and Financial Representatives regarding case underwriting and risk appraisal.Responsible for prescreen inquiries.

Underwriting Responsible for the analysis and appraisal of a broad range of insurance applications; approves, classifies, or declines applications for various ages and policy amounts with occasional guidance, as needed.​Uses advanced UW knowledge and expertise to provide the appropriate level of underwriting skill and mentoring to UWs​.Uses advanced skills to review applications and adheres to underwriting standards.​Solves complex problems and escalations.Advanced level of experience with NM product types and changesModels change agility while maintaining mortality and morbidity expectations.Demonstrates continuous learning through the early adoption of new ways of underwriting.Proficient with Reinsurance programs and able to determine where to best place a case.Underwrites applications, maintaining industry-leading mortality and morbidity giving the best possible offer that can be made.Provides active case and requirement management and provides customized service with guidance.Demonstrates advanced ability to communicate & negotiate with Field Partners to explain modified or declined decisions & assist in policy placement.Provides advanced financial, medical, and lay underwriting assessments and offers innovative solutions to keep Northwestern Mutual as the choice of our customers.Actively utilizes the most effective means to obtain the necessary information, including Internet searches, direct contact with the insured, and communication with third party advisors (Accountants, Attorneys, etc.)Collaborates with medical directors and technical staff.Responsible for adherence to procedures and regulatory processes​.Understands and meets all quality, service, and production goals​.Partners with Underwriting Support for case management.Cross-Functional leadership.Subject matter expert in product process w/collaboration w/functional partners and participates in projects and department initiatives.Collaborates and designs P3 curriculum with L&D/Tech Team​.

Qualifications A bachelor's degree preferred or demonstrated consistent success in prior Underwriting role as evidence by satisfactory case management and quality review.Minimum of 5 years of underwriting experience.Analytical skills with an established record to make independent decisions on complex cases and apply sound judgment in the application of rules.Excellent written and oral communication skills with the ability to handle confidential information, exercise tact, diplomacy, and resourcefulness.Proficient in computer skills and using various software packages.Ability to work accurately while maintaining speed and flexibility in a team and independent production environment.A high degree of organization and the ability to establish priorities and meet deadlines.Demonstrated strong leadership skills and a high degree of self-motivation and initiative to lead projects or committees.Displays agility to manage multiple tasks​ and adapt in a changing work environment.

#LI-Remote or LI-Hybrid Compensation Range: Pay Range
- Start: $76,650.00 Pay Range
- End: $142,350.00 Geographic Specific Pay Structure: Structure 110: $84,350.00 USD
- $156,650.00 USD Structure 115: $88,130.00 USD
- $163,670.00 USD We believe in fairness and transparency.

It’s why we share the salary range for most of our roles.

However, final salaries are based on a number of factors, including the skills and experience of the candidate; the current market; location of the candidate; and other factors uncovered in the hiring process.

The standard pay structure is listed but if you’re living in California, New York City or other eligible location, geographic specific pay structures, compensation and benefits could be applicable, click here to learn more.

Grow your career with a best-in-class company that puts our clients' interests at the center of all we do.

Get started now! Northwestern Mutual is an equal opportunity employer who welcomes and encourages diversity in the workforce.

We are committed to creating and maintaining an environment in which each employee can contribute creative ideas, seek challenges, assume leadership and continue to focus on meeting and exceeding business and personal objectives.

Skills Change Adaptability (NM)
- Advanced, Information Optimization (NM)
- Advanced, Customer Support (NM)
- Advanced, Underwriting Ecosystem (NM)
- Advanced, Customer Centricity (NM)
- Intermediate, Insurance Acumen (NM)
- Advanced, Technology Adaptation (NM)
- Advanced (Inactive), Information Gathering (NM)
- Advanced, Attention to Detail (NM)
- Advanced, Training, Educating & Awareness (NM)
- Intermediate, Adaptive Communication (NM)
- Advanced, Consulting (NM)
- Advanced, Data Application (NM)
- Advanced, Decision Making (NM)
- Advanced, Negotiation & Managing Objection (NM)
- Advanced, Mortality, Morbidity, & Risk Analysis (NM)
- Advanced, Learning Agility (NM)
- Advanced (Inactive), Underwriting Practices (NM)
- Advanced, Reasoning (NM)
- Advanced FIND YOUR FUTURE We’re excited about the potential people bring to Northwestern Mutual.

You can grow your career here while enjoying first-class perks, benefits, and our commitment to a culture of belonging.

Flexible work schedulesConcierge serviceComprehensive benefitsEmployee resource groupsPandoLogic.

Keywords: Underwriting Consultant, Location: Franklin, WI
- 53132
Remote working/work at home options are available for this role.

**This position is open to remote anywhere in the US, however, must be able to work Central Time Zone hours
** What You'll Do Make fair, accurate, timely and quality claims decisions on life insurance claims up to allowable signature limit.

May work on cases exceeding this limit with prior approval and second signatures.

Examines claim information obtained, including, but not limited to, beneficiary data, policy values, and policy status; and analyzes information received during the claim review process, including but not limited to, death certificates, claim forms, assignment forms, divorce decree, estate, and trust documentation.

With empathy, deliver personalized experience for beneficiaries and field members by assisting with educating on settlement options available, which varies by policy type.

Communicate verbally and construct letters and emails to beneficiaries, field members, and third parties in response to inquiries and/or regarding outstanding requirements, claim status updates, and claims decisions as part of the overall claim handling process.

Manage phone and transactional responsibilities while adhering to strict confidentiality and privacy standards.

Research and evaluate solutions to situations that arise and resolve concerns on an “as-needed†basis which oftentimes includes deviating from procedures.

Maintain organization, accuracy, and timeliness in individual case management system; capture and document claim related information accurately and/or refer tasks as appropriate.

Maintain production and claims quality standards.

Embrace new technology and serve as an advocate by educating beneficiaries and field representatives.

Supports digital savvy capabilities in self and others and adapts to changing environments and new situations effectively and positively.

Work effectively with unstructured teams, situations, or environment.

Participate in team meetings, projects and committee work as appropriate, including development of process improvements.

Assist with special projects and initiatives, as needed to support the business.

What You Will Bring to the Role Bachelor’s degree or equivalent combination of education and work experience.

Previous experience with life insurance desirable.

Must be technically savvy with the ability to toggle between multiple applications and/or computer monitors simultaneously.

Exhibits empathy and strong client focus and customer service skills.

Able to analyze complex information and asks thoughtful questions to understand the situation.

Demonstrated ability to work with a high degree of accuracy in handling detailed technical work.

High degree of self-motivation with proven initiative in accepting responsibility for work results and in contributing cooperatively to group goals.

Skilled at developing and maintaining effective working relationships with a positive, confident attitude; exhibits objectivity and openness to others’ views.

Strong organizational skills, with demonstrated ability to independently set priorities and to meet deadlines.

Proven ability to maintain strict confidentiality and exercise tact and diplomacy with field/clients and beneficiaries.

Skills You Have Analytical Thinking: Organizes and compares various aspects of a situation to comprehend and identify key or underlying complex issues through the use of quantitative data and analysis; leverages strong business acumen, problem solving, and interpersonal skills to think critically about situations from multiple perspectives and consistently seeks ways to improve processes.

Attention to Detail: Focuses on specific details to spot and correct errors in advance of them being found and surpass quality expectations.

Performs work with thorough proofreading for presentation, content, accuracy, and overall quality.

Change Adaptability: Becomes adaptable in response to continual changes; shows an openness to new ways of working, new methods, work-in-progress improvements and changes and seamlessly navigates the changing business environment and adjusts behavior as appropriate to the situation.

Claims Acumen: Applies the knowledge of claims philosophy, contracts, and policies and procedures for filing claims, assessing claims for accuracy and completeness, verifying eligibility, and adjudicating claims based on established criteria to handle complex, contestable, sensitive, and large benefit amount claims.

Evaluates medical, financial, and occupational information and reviews to determine if insured meets contractual provisions while taking the state regulations or other relevant contractual information into consideration to make informed decisions.

Analyzes insurance claims to determine the validity/risk of the claim, and the extent of coverage.

Customer Centricity: Applies a customer first mindset to design and continuously improve solutions, systems, processes, and services that support enterprise strategy, impact critical business outcomes, and drive organizational success.

Decision Making: Makes timely, data-driven decisions by understanding the probability of success, identifying risks, gathering business requirements, and developing value statements.

Insurance Acumen: Applies knowledge of insurance concepts, policies, regulations, and industry practices to solution challenges.

Understands insurance principles, such as underwriting, claims philosophy, and risk.

#LI
- Remote This position has been classified as an Associated Person under NMIS guidelines and requires fingerprinting and completion of required form.Non-Registered Fingerprinted
- FINRA Compensation Range: Pay Range
- Start: $49,560.00 Pay Range
- End: $92,040.00 Geographic Specific Pay Structure: Structure 110: $54,530.00 USD
- $101,270.00 USD Structure 115: $56,980.00 USD
- $105,820.00 USD We believe in fairness and transparency.

It’s why we share the salary range for most of our roles.

However, final salaries are based on a number of factors, including the skills and experience of the candidate; the current market; location of the candidate; and other factors uncovered in the hiring process.

The standard pay structure is listed but if you’re living in California, New York City or other eligible location, geographic specific pay structures, compensation and benefits could be applicable, click here to learn more.

Grow your career with a best-in-class company that puts our clients' interests at the center of all we do.

Get started now! Northwestern Mutual is an equal opportunity employer who welcomes and encourages diversity in the workforce.

We are committed to creating and maintaining an environment in which each employee can contribute creative ideas, seek challenges, assume leadership and continue to focus on meeting and exceeding business and personal objectives.

Skills Information Gathering (NM)
- Intermediate, Problem Management (NM)
- Intermediate, Prioritization (NM)
- Intermediate, Statutes & Regulation (NM)
- Beginner, Insurance Contract Management (NM)
- Intermediate, Empathetic Communication (NM)
- Intermediate, Insurance Acumen (NM)
- Beginner, Annuity Acumen (NM)
- Beginner, Customer Centricity (NM)
- Intermediate, Analytical Thinking (NM)
- Intermediate, Learning Agility (NM)
- Intermediate (Inactive), Adaptive Communication (NM)
- Intermediate, Decision Making (NM)
- Intermediate, Attention to Detail (NM)
- Intermediate, Claims Acumen (NM)
- Intermediate, Change Adaptability (NM)
- Intermediate, Data Application (NM)
- Intermediate FIND YOUR FUTURE We’re excited about the potential people bring to Northwestern Mutual.

You can grow your career here while enjoying first-class perks, benefits, and our commitment to a culture of belonging.

Flexible work schedulesConcierge serviceComprehensive benefitsEmployee resource groupsPandoLogic.

Keywords: Insurance Examiner, Location: Franklin, WI
- 53132
Remote working/work at home options are available for this role.

US-CA-GOLETA-H01 ~ 6380 Hollister Ave ~ BLDG H01 Position Role Type:
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required prior to start date.​ S. citizens are eligible for a security clearance​ Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required on day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Raytheon is seeking a talented and motivated Senior Systems Integration and Test II Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting various Electronic Warfare (EW) and Radar Warning Receiver (RWR) Systems. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment.

Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. The Systems Integration & Test II Engineer provides comprehensive systems engineering and integration test support by assessing program needs, planning and coordinating test activities, developing schedules, and executing test efforts from project initiation through system transition. The role involves addressing a wide range of technical challenges that require thorough information gathering, detailed analysis, and investigative problem‑solving to identify root causes and determine effective resolutions.

The following responsibilities are expected though not limited to for a Senior Systems Integration & Test II Engineer (EW)
Generate test plans/procedures for assessing Electronic Warfare (EW) system performance
Execute in-house and off-site test activities for system demonstrations and/or system sell-off.
Brief senior program management and engineering leadership.
Test EW hardware and software builds.

Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) discipline (preferably Systems Engineering, Electrical Engineering, Software Engineering or Physics) and a minimum of 2 years of prior relevant experience
S. government issued Secret security clearance is required prior to start date. S. citizens are eligible for a security clearance

Experience writing requirements for EW/Radar system test events
Experience leading system test equipment and special test equipment development activities
Experience troubleshooting, testing, and integrating EW/Radar system test equipment
Experience modeling the performance of EW/Radar systems
Experience with integration of mixed signal modules into the next higher assembly
Experience with security requirements related to government testing
Familiarity with Model-Based Systems Engineering (Cameo Enterprise Architecture), specifically using SysML. Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position 

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.