Jobs in Christiana Delaware
396 positions found — Page 2
JOB SUMMARY
Lead and guide the respective Quality Engineering section in operating with a high level of efficiency, integrity and enthusiasm, striving to achieve excellence in all endeavors. ESSENTIAL DUTIES AND RESPONSIBILITIES · Recruit and maintain a high-caliber work force appropriate to business needs.· Develop, motivate and lead all team members to perform to their full potential, providing direct and timely feedback in formal and informal media.
· Monitor and evaluate the level of involvement and success of the Quality Engineering activities and their impact on the continuous improvement of process yields and efficiencies. Provide appropriate level of feedback, support and coaching.
· Provide support to all functions to ensure that appropriate corrective and preventative measures are taken and implemented on a timely basis.
· Evaluate and schedule appropriate training programs and/or seminar for the Quality Engineering staff.
· Ensure plant wide ESD Controls and Product Regulatory requirements are established, monitored and maintained.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS · Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
JOB SUMMARY
The Project Industrial Engineer will be responsible for planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. The Project IE will adopt as its goals profitability, effectiveness, adaptability, responsiveness, quality, and the continuous improvement of products and services throughout their life cycles. ESSENTIAL DUTIES AND RESPONSIBILITIES Same responsibilities as Senior Industrial Engineer, but focusing on cross-functional projects, plantwide or across different Jabil sites.· Manages cross functional teams from multiple sites to identify, develop, test and implement world class manufacturing equipment, systems, tools, procedures and processes.
· Ensures that current and future processes and manufacturing systems meet and/or exceed customer and regulatory requirements.
· Reviews and promotes improvement in customer metrics to ensure customer satisfaction.
· Acts as a liaison for Operations and BU between Jabil sites for program transfers including providing input into transfer plans and timelines, supporting data, technology, process and procedural requirements as well as knowledge transfer activities and participating in launch activities as needed.
· Provides support and technical assistance to new facility and/or Workcell startups.
· Provides mentoring and technical assistance to Jabil site Industrial Engineering staff.
· Leads and coordinates the standardization of systems, procedures and practices across all of the Jabil workcells.
· Ensures that current and future quality and manufacturing systems meet and/or exceed customer and regulatory requirement.
Design of optimized human interfaces for SMT and Backend/DF in the following areas:
· Raw material delivery process, storage and line feed systems.
· Product flow and online material handling systems.
· WIP management, sizing and buffer storage systems.
· Ergonomic workstation design and layout.
· Process optimization.
· Layout of the workcell and/or complete Jabil plants.
· 5S housekeeping techniques.
· Develop/Sustain/Improve all assembly processes.
· Time study analysis.
· Own and drive yield improvement programs.
· Box build quote and products.
· Systems support (e.g. SAP, MES, IEDB…)
Should be able to be SME or support other IE’s in one or more of the IE SME categories like:
· Work Measurement
· Systems and Metrics
· Ergonomics / Workstation and line design
· Capacity Sizing
· PFMEA, DFA
· Fixtures and Tools
· Simulation
· Quoting
· Warehousing
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS · Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, simulation, process mapping, facilities and workstation design, operations research, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong financial and analytical ability
o Proven track record of successful change management accomplishments, implementing and management continuous improvements and cost reduction programs
o Strong communication skills · Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Important: This position is based on-site in Zapopan, Jalisco
Jabil is seeking a Sr. software Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. The Software Test Development Engineer play a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware components or devices such as motherboard, memory, CPU, storage (SSD, HDD, NVMe) and PCIE devices (NIC, GPU, Mezz cards, RAID cards)
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation : Maintain comprehensive manufacturing server (L10) and rack (L11) documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up-to-date.
- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Expertise with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Expertise in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
EDUCATION & EXPERIENCE REQUIREMENTS:
- BS degree in Electrical/Computer Engineering, Computer Science o r related field. MS preferred.
- 8 years experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products.
- Excellent verbal and written communication skills.
- Experience working in a multi-site and multi-cultural environments.
- Domestic and/or International travel, up to 10%, may be required.
Important: This position is based on-site in Guadalajara, Jalisco, open to relocation.
Job Description:
Jabil is seeking a Product Engineer who will directly contribute to the transformative growth within our Cloud and Enterprise Infrastructure division by applying unique and innovative approaches to developing end customer product solutions. You will be responsible for managing the technical direction of Advanced Compute Platform NPI and manufacturing programs through the lens of the customer, factory, and business leadership. You will also be responsible for partnering and collaborating with customers, strategic suppliers, internal engineering, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
LEADERSHIP RESPONSIBILITIES
- Responsible for product introductions and manufacturing performance for new and sustaining AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support for your assigned manufacturing site in the areas of product, test infrastructure, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide the customer and Jabil operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Partner with site operations and test leadership to drive root cause investigations leading to clear actions and improvements in FPY, test throughput and repair yield.
- Primary technical interface for customer product introductions and manufacturing performance from a server and storage subject matter expertise perspective.
- Directly contribute to the knowledge base used for effective/accurate debug, train the appropriate test/debug leads and respond to feedback in a timely manner to support daily operational objectives.
- Directly contribute to the knowledge base used for effective/accurate debug, train the appropriate test/debug leads and respond to feedback in a timely manner to support daily operational objectives.
- Experience with server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Systems management experience with server products including embedded remote management standards, interfaces and applications.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions.
- Ability to leverage SW/HW expertise to determine root cause that leads to optimized solutions.
- Expertise with Linux operating systems, related applications and script development.
- BS degree in Electrical/Computer Engineering, Computer Science or related field. MS preferred.
- 3+ years experience in a hardware product development environment with enterprise server, storage or networking products.
- Experience working in a multi-site and multi-cultural environments.
- Proven ability to work within a fast-paced and highly ambiguous business environment.
- Domestic and/or international travel, up to 10%, may be required.
JOB SUMMARY
The Ops Project Manager III will facilitate and lead strategic initiatives for a defined customer (internal or external) or user. Provide management and guidance to multi-functional project teams. Manage and enhance customer relationships. Provide full accountability for project schedules, project management and performance requirements for enterprise level projects.ESSENTIAL DUTIES AND RESPONSIBILITIES · Responsible for ensuring all of the project requirements and/or objectives are correctly gathered, understood and properly translated for execution
· Build team(s) to address the project goals and objectives
· Collaborate with customer (internal or external) from requirements gathering through product acceptance/ approval
· Align the project team to customer needs by establishing milestones, goals, and objectives based on input from all functional areas and stakeholders within the project
· Review project schedules with functional project managers and project coordinators allocated to projects
· Provide guidance and motivation to project teams to successfully achieve project goal and corporate initiatives
· Communicate project objectives in terms of overall strategic business objectives
· Serve as interface with customers, vendors, stakeholders and project sponsor(s)
· Manage development of project plans with focus on achievement of project goals and corporate initiatives, including project specific Key Performance Indicators (KPI’s) or metrics
· Responsible for recognizing project's Key Performance Indicators (KPI) and manage the work within scope, quality, time and cost constraints
· Drive project to completion in accordance with the project schedule
· Coordinate the efforts of the team to develop an integrated project plan and risk analysis with action plans to mitigate the risks
· Management of Resource capacity and time tracking allocated to the project
· Participates in the financial management and analysis of costs for projects, including Capital Expenditures Requests (CER’s) travel, training, resources allocation and other project related costs
· Accountable for overall project success - including cost, schedule, quality, and scope management
· Report project status, issues and implemented solutions as well as evaluations and assessments of the results
· Provide leaders with updates, including greatest opportunities for improvement
· Recognize potential problem areas against the plan and identify and implement alternative solutions
· Identify best cost solutions to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value added processes, or complete re-engineering of processes and systems)
· Provide key stakeholders with regular project performance status, variances to plan, and identification of corrective actions (if required)
· Drive continuous improvement through trend reporting analysis and metrics management
· Demonstrate a commitment to customer service; anticipate, meet and exceed expectations by solving problems quickly and effectively, making customer issues a priority
· Drive relevant, concise and effective communication through a variety of mediums
· Comply and follow all procedures within the company security policy
· May perform other duties and responsibilities as assigned JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS · Demonstrated Leadership and Management capabilities
· Project Management Professional (PMP) or equivalent certification desirable
· Knowledge of organization’s operating policies and procedures required
· Knowledge of organization’s culture and guiding principles · Previous experience in manufacturing environment: Engineering, Test, Quality, Planning, Materials, etc · Prior experience in customer interface · Strong operational and financial knowledge required · Substantial knowledge of Jabil and demonstrated ability to leverage organization · Consultative skills (ability to understand true customer needs)· Good communications skills · Distinctive problem solving leader · Should have the following personal characteristics: strong leader, professional, hard-charging, detail-oriented, reliable, calm under fire, creative, with a can-do attitude · Automotive/ Medical background experience as required · Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required EDUCATION & EXPERIENCE REQUIREMENTS · Bachelor’s degree required (Supply Chain Management or Engineering)
· PMP certified professional is desirable
· Minimum 2 years work-related experience required in a supervisory/management role and
· Minimum 2 years project management experience or related discipline
· Or an equivalent combination of education, training and/or experience
A MISSION WORTHY OF A CAREER! If you're looking for "just a job," then stop reading right now.
But, if you're looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S.
Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent.
USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify.
Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America.
Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below) .
Salary and Benefits Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632
- $92,219 per year.
Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive
* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be eligible for up to $20,000 in incentives.
The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.
*Retention Incentive
* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duty Locations IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S.
Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences.
Relocation may be required.
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others.
A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014.
This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12.
You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: Big Bend Sector Stations
-
*Presidio, Van Horn,
*Sanderson, Alpine,
*Sierra Blanca, Marfa Buffalo Sector Stations
- Wellesley Island Del Rio Sector Stations
- Del Rio, Brackettville,
*Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde El Paso Sector Stations
- Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces,
*Lordsburg, Santa Teresa, Ysleta El Centro Sector Stations
- El Centro, Indio, Calexico Grand Forks Sector Stations
- Pembina Havre Sector Stations
- Havre, Malta, Plentywood, Scobey, Sweetgrass Houlton Sector Stations
- Calais, Fort Fairfield, Jackman, Rangeley, Van Buren Laredo Sector Stations
- Laredo South, Cotulla,
*Hebbronville, Laredo West,
*Freer, Laredo North, Zapata Rio Grande Valley Sector Stations
- Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen San Diego Sector Stations
- Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente Spokane Sector Stations
- Colville, Curlew, Metaline Falls, Oroville Swanton Sector Stations
- Beecher Falls, Burke, Champlain, Newport, Richford Tucson Sector Stations
-
*Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox Yuma Sector Stations
- Blythe, Yuma, Wellton Duties and Responsibilities As a BPA, you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.
Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include: Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband Performing farm checks, building checks, traffic checks, city patrols, and transportation checks Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications You qualify for the GL-5 grade level if you possess one of the following: Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of general work experience AND successfully completed college education.
This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following: Experience: One year of specialized work experience that shows you have the skills necessary to: Make sound judgments and decisions in the use of firearms.
Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership.
Or will receive a bachelor's degree with Superior Academic Achievement.
Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level.
Please refer to the BPA GL-9
- 11 announcement.
Other Requirements Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA).
The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training : After you are hired, you will be detailed to the U.S.
Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses.
Border Patrol work requires the ability to speak and read Spanish, as well as English.
Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
How to Apply: Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.
You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam .
If you have questions about the application process, contact a recruiter through the U.S.
Border Patrol page: /s/usbp .
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
AMN Healthcare Allied is seeking a travel CT Technologist for a travel job in WILMINGTON, Delaware.
Job Description & Requirements
- Specialty: CT Technologist
- Discipline: Allied Health Professional
- Start Date: 05/11/2026
- Duration: 12 weeks
- 36 hours per week
- Shift: 12 hours, nights
- Employment Type: Travel
Job Description & Requirements/n
/nComputed Tomography Technologist - (CT Tech)/n
/nStartDate: 5/11/2026 /nAvailable Shifts: 8/12 N /nPay Rate: $2723.00 - $2806.00 /n
/nSiemen’s FLASH dual source and Siemen’s EDGE/nCT experience and prior pediatric experience preferred/npeds/Siemen’s CT experience, and current Delaware license /n/nLocated in Wilmington, DE, this CT Tech position offers an exciting opportunity to work in a city known for its historical landmarks and cultural diversity. Wilmington boasts a lively calendar of events and scenic attractions, making it an ideal location for those seeking both professional growth and leisure opportunities. The medical facility offers a state-of-the-art environment with continued educational programs. As a CT Tech, you will be responsible for conducting diagnostic imaging procedures, maintaining patient care standards, and collaborating with medical professionals to deliver top-notch health services. You will work in a supportive setting with shifts that offer flexibility, alongside a committed team dedicated to providing exceptional care./n/n
Required Qualifications
CT Technologist, Computed Tomography
Licenses: RAD-DE
References: 1 Reference in entire work history/n
Preferred Qualifications
Siemen’s FLASH dual source and Siemen’s EDGE
CT experience and prior pediatric experience preferred
need peds/Siemen’s CT experience, and current Delaware license /n
About the Facility
This children’s hospital prides itself on offering a full range of services including intensive and acute specialty pediatric care in a family-centered, kid-friendly environment. Dedicated to providing high quality children’s healthcare and adding to its list of accolades, this facility is ranked among the best children’s hospitals in the nation by U.S. News & World Report and was awarded the elite distinction as a 2012 Leapfrog Top Children’s Hospital. For over 70 years, families in Wilmington, Delaware and the surrounding region have had full confidence and trust in the medical procedures and treatments the physicians and nurses provide./n
Facility Location
Wilmington is Delaware’s largest city, offering a diverse range of culture and entertainment, including the Italian Festival, Greek Festival, Polish Festival, Haneef's African Festival, IndiaFest, Hispanic Week, the Clifford Brown Jazz Festival, and the Riverfront Blues Festival. Explore the city’s many gardens, museums, wineries, and historic districts; stroll the 1.2-mile Riverwalk; or take the short trip to Philadelphia, where even more shopping, dining, and entertainment can be experienced. /n
/nJob Benefits/n
/nAllied travel assignments are typically for 13 weeks and offer generous packages that include:
- Competitive pay rates
- Medical, Dental, Vision
- 401(k) and Flex Spending
- Life Insurance
- Accident and Short-term Disability Coverage
- Free Continuing Education
- Competitive Housing Deal
- Refer a friend and earn extra cash!
/n
/nAbout the Company/n
/nAt AMN Healthcare, we strive to be recognized as the most trusted, innovative, and influential force in helping healthcare organizations provide quality patient care that continually evolves to make healthcare more human, more effective, and more achievable./n
Computed Tomography Technologist, CT tech, CT technologist, computed tomography tech, CT, radiology, radiologic technologist, radiologic, allied health, healthcare, health care, allied, medical, hospital, patient care, ct, computed tomography/n
AMN Healthcare Allied Job ID #3462294. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Computed Tomography Technologist - (CT Tech)
About AMN Healthcare Allied
AMN Healthcare is a leading force in the healthcare industry, committed to being the most trusted, innovative, and influential partner for healthcare organizations. With a focus on providing quality patient care, AMN Healthcare offers holistic solutions that reduce costs, streamline processes, and improve efficiencies. The company boasts over 30 years of experience and takes pride in staffing leading healthcare facilities with the nation's best travelers. As an industry leader, AMN Healthcare offers a diverse team dedicated to supporting healthcare workers and facilities, ensuring a personalized and supportive experience for both clients and candidates.
Visit for more information.
Benefits
- Company provided housing options
- Medical benefits
- Dental benefits
- Continuing Education
Synergy Medical Staffing is seeking a travel Physical Therapist for a travel job in New Castle, Delaware.
Job Description & Requirements
- Specialty: Physical Therapist
- Discipline: Therapy
- Start Date: 03/23/2026
- Duration: 13 weeks
- 40 hours per week
- Shift: 8 hours, days
- Employment Type: Travel
Travel, PT - Rehab
Location: New Castle, Delaware
Shift: 5x8 Days, 08:00:00-16:00:00, 8.00-5
Duration 13 Weeks
When you join Synergy Medical Staffing, you’ll have a dedicated recruiter helping you at all times. Your recruiter is a cross between a career coach and a concierge. They will help you fine-tune your resume, find your next job, and locate an apartment (even one that takes pets!). Make one call and get help with everything from placement to housing to payroll, even travel directions!
As a travel, contract and permanent placement medical staffing company with over 20 years of experience in the industry, we understand your needs.
Synergy’s Benefits are best in class and include the following:
- 401K that matches up to 5% of your pay and you are 100% vested from Day 1.
- Medical, Dental, Vision, Life insurance, Long and short-term disability and others
- Loyality Program
- Weekly pay
- Holiday Pay (varies by Assignment)
- Guaranteed Hours (varies by Assignment)
- Referral bonus
- Continuing Education
- License and certification reimbursement
Synergy Medical Staffing Job ID #35940949. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: PT:Rehab,08:00:00-16:00:00
About Synergy Medical Staffing
When you join Synergy Medical Staffing, you’ll have a dedicated recruiter helping you at all times. Your recruiter is a cross between a career coach and a concierge. They will help you fine-tune your resume, find your next job, and locate an apartment (even one that takes pets!). Make one call and get help with everything from placement to housing to payroll, even travel directions!
As a travel, contract and permanent placement medical staffing company with over 12 years of experience in the industry, we understand your needs.
Are you interested in traveling, or just a job around the corner? Whatever your preference, you can be sure there are plenty of Nursing Jobs, Allied Jobs and Physical Therapy Jobs, Occupational Therapy Jobs, Speech Therapy Jobs and Rehab Therapy jobs anywhere you want to go. Synergy Medical Staffing professionals have been in the Medical staffing employment and staffing industry for over 12 years, and have developed solid relationships with numerous healthcare facilities nationwide. Contact us now and expand your medical career with new opportunities from Synergy Medical Staffing.
Synergy’s Benefits are best in class and include the following
- 401K
- Day 1 Full Medical, Dental, Vision, Life insurance, Long and short term disability and others
- Student Loan Repayment and CEU reimbursement
- Loyalty bonus after 600 hours
Benefits
- Discount program
- Weekly pay
- Holiday Pay
- Guaranteed Hours
- Referral bonus
- Medical benefits
- Dental benefits
- Continuing Education
- License and certification reimbursement
- Life insurance
- 401k retirement plan
- Cancelation protection
- Vision benefits
Location:
Bear, DE
Company:
Western Express
Pay:
$0.40 to $0.48 per mile
Route Type:
otr, regional
Start Date:
ASAP
About the Position
CALL TO SPEAK WITH A SEATING SPECIALIST TODAY!
(833) 615-1594
Why wait to earn more?
Western Express has immediate openings for entry level company truck drivers and driver trainers. With our newly increased pay package, you'll earn one of the highest rates in the industry!
CALL (833) 615-1594
or
APPLY NOW ! Limited opportunities!
We Offer:
GREAT PAY
– Recent grads can make up to
$80,000
their
FIRST YEAR!
HIGH RATES
– Start up to
48 CPM
+ increase up to
53 CPM
within your
first year !
RELIABLE HOME TIME
– Get home every 12-16 days with OTR or
home every week
with Regional!*
Experienced top earners and trainers make up to
$100,000
per year!
Outstanding Team incentives: Up to
$3,400/week
per team!
Choose Flatbed or
100% no-touch
Dry Van freight with 60-80%
drop and hook *
$1,000
driver referral bonuses –
unlimited!
Dependable trucks : Well-maintained fleet equipped with the
latest safety technology
Excellent Benefits: Health, Dental and Vision + 401k
Pet & Rider policies
Paid Vacation
NO EXPERIENCE NECESSARY ! WE WILL GIVE YOU THE TRAINING YOU NEED! (CDL-A required)
INTERESTED IN BEING A DRIVER TRAINER?
Drive with Western for 3 months or more and you can qualify as a driver trainer at Western Express! Call today for more details on how you can earn up to
$100,000 annually !
Have you been out of driving for 3 years or more? Are you a recent CDL-A grad? Call us for information about our Training Programs today!
Western Express is a non-discriminatory and equal opportunity employer. Regardless of your background, we'd like to speak with you to see if you qualify.
*Flatbed/Van freight and regional fleet availability subject to geographical eligibility.
**Subject to change without notice. Additional restrictions may apply. Call for details.
Requirements
Valid CDL-A (Class A CDL)
21+ Years of Age
Location:
Bear, DE
Company:
Western Express
Pay:
$0.40 to $0.63 per mile
Route Type:
otr
Start Date:
ASAP
About the Position
CALL TO SPEAK WITH A SEATING SPECIALIST TODAY!
(833) 615-1594
Real Miles. Real Money.
Western Express has immediate openings in our Flatbed and Dry Van divisions for company drivers and driver trainers! With our newly increased pay package, you'll earn one of the highest rates in the industry!
CALL (833) 615-1594 or APPLY NOW!
Limited opportunities!
We Offer:
GREAT PAY
– Earn up to
$100,000
per year!
HIGH RATES
– Experienced drivers now earn up to
56 CPM !
NEW SAFETY BONUS -
Qualify for an
extra 5 CPM
(van) or
extra 7 CPM
(flatbed) and take home up to
$800 more
every month!*
Dependable trucks : Well-maintained fleet equipped with the
latest safety technology
Choose Flatbed or
100% no-touch
Dry Van freight with 60-80%
drop and hook **
Outstanding Team incentives: Up to
$3,400/week
per team
$1,000
driver referral bonuses –
unlimited!
Excellent Benefits: Health, Dental and Vision + 401k
Pet & Rider policies
Paid Vacation
NO EXPERIENCE NECESSARY ! WE WILL GIVE YOU THE TRAINING YOU NEED! (CDL-A required)
INTERESTED IN BEING A DRIVER TRAINER?
Drive with Western for 3 months or more and you can qualify as a driver trainer! Call today for more details on how you can earn up to $100,000 annually!
Have you been out of driving for 3 years or more? Are you a recent CDL-A grad? Call us for information about our Training Programs today!
Western Express is a non-discriminatory and equal opportunity employer. Regardless of your background, we'd like to speak with you to see if you qualify.
*Safety bonus eligibility conditions apply, including minimum mileage, accident-free driving and more.
**Flatbed/Van freight and regional fleet availability subject to geographical eligibility.
***Subject to change without notice. Additional restrictions may apply. Call for details.
Requirements
Valid CDL-A (Class A CDL)
21+ Years of Age
