Jobs in Carrollton, TX
809 positions found — Page 15
SMT Process Engineer IV - Advanced Troubleshooting Expertise (RICHARDSON)
✦ New
Salary not disclosed
Job Summary
The SMT Process Engineer IV is a senior-level technical expert responsible for optimizing and maintaining surface mount technology (SMT) processes to ensure high-quality, efficient, and cost-effective electronic assembly. This role involves advanced troubleshooting, process development, and continuous improvement initiatives across multiple SMT lines, often acting as a lead or mentor within the engineering team.
Job Responsibilities
- Lead the development, implementation, and optimization of complex SMT processes, including stencil printing, pick-and-place FUJI, reflow soldering, and automated optical inspection (AOI).
- Conduct advanced root cause analysis and implement corrective actions for SMT process defects (e.g., shorts, opens, voids, component placement issues) using statistical process control (SPC) and other analytical tools.
- Design and execute experiments (DOE) to improve SMT process robustness, yield, and throughput, focusing on new product introduction (NPI) and existing product enhancements.
- Collaborate with design engineering, manufacturing, and quality teams to ensure manufacturability (DFM) and resolve complex technical issues related to SMT assembly.
- Develop and maintain comprehensive process documentation, work instructions, and training materials for SMT operators and technicians.
- Evaluate and recommend new SMT equipment, materials, and technologies to enhance capabilities and improve manufacturing efficiency.
- Provide technical mentorship and guidance to junior engineers and manufacturing personnel on SMT best practices and problem-solving techniques.
- Drive continuous improvement projects using Lean manufacturing and Six Sigma methodologies to reduce waste and increase productivity within SMT operations.
- Monitor key performance indicators (KPIs) for SMT processes and present findings and recommendations to management.
- Ensure compliance with all relevant industry standards, safety regulations, and quality management systems (e.g., ISO, IPC).
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8+ years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Expert-level knowledge of SMT equipment (e.g., printers, pick-and-place machines, reflow ovens, AOI/SPI) from various manufacturers (e.g., Fuji, Universal, Koh Young, Agilent).
- Deep understanding of IPC-A-610 and J-STD-001 standards.
- Proficiency in statistical process control (SPC), design of experiments (DOE), and advanced problem-solving methodologies (e.g., 8D, Six Sigma).
- Strong analytical skills with the ability to interpret complex data and make data-driven decisions.
- Demonstrated ability to lead technical projects and drive process improvements.
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and mentor others.
- Experience with CAD/CAM software for SMT programming and DFM analysis is a plus.
- Ability to work effectively in a fast-paced, dynamic manufacturing environment.
The SMT Process Engineer IV is a senior-level technical expert responsible for optimizing and maintaining surface mount technology (SMT) processes to ensure high-quality, efficient, and cost-effective electronic assembly. This role involves advanced troubleshooting, process development, and continuous improvement initiatives across multiple SMT lines, often acting as a lead or mentor within the engineering team.
Job Responsibilities
- Lead the development, implementation, and optimization of complex SMT processes, including stencil printing, pick-and-place FUJI, reflow soldering, and automated optical inspection (AOI).
- Conduct advanced root cause analysis and implement corrective actions for SMT process defects (e.g., shorts, opens, voids, component placement issues) using statistical process control (SPC) and other analytical tools.
- Design and execute experiments (DOE) to improve SMT process robustness, yield, and throughput, focusing on new product introduction (NPI) and existing product enhancements.
- Collaborate with design engineering, manufacturing, and quality teams to ensure manufacturability (DFM) and resolve complex technical issues related to SMT assembly.
- Develop and maintain comprehensive process documentation, work instructions, and training materials for SMT operators and technicians.
- Evaluate and recommend new SMT equipment, materials, and technologies to enhance capabilities and improve manufacturing efficiency.
- Provide technical mentorship and guidance to junior engineers and manufacturing personnel on SMT best practices and problem-solving techniques.
- Drive continuous improvement projects using Lean manufacturing and Six Sigma methodologies to reduce waste and increase productivity within SMT operations.
- Monitor key performance indicators (KPIs) for SMT processes and present findings and recommendations to management.
- Ensure compliance with all relevant industry standards, safety regulations, and quality management systems (e.g., ISO, IPC).
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8+ years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Expert-level knowledge of SMT equipment (e.g., printers, pick-and-place machines, reflow ovens, AOI/SPI) from various manufacturers (e.g., Fuji, Universal, Koh Young, Agilent).
- Deep understanding of IPC-A-610 and J-STD-001 standards.
- Proficiency in statistical process control (SPC), design of experiments (DOE), and advanced problem-solving methodologies (e.g., 8D, Six Sigma).
- Strong analytical skills with the ability to interpret complex data and make data-driven decisions.
- Demonstrated ability to lead technical projects and drive process improvements.
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and mentor others.
- Experience with CAD/CAM software for SMT programming and DFM analysis is a plus.
- Ability to work effectively in a fast-paced, dynamic manufacturing environment.
temporary
S
Sales Consultant - Fine Wine On/Off Premise Combo
✦ New
Salary not disclosed
What You Need To Know
Shape a remarkable future with us. Build a career working for an industry leader that truly invests in their people – and equips them with leading technology, continuous learning, and the ability to bring their best selves to work. As the premier wine and spirits distributor, Southern Glazer’s isn't just one of Forbes’ Top Private Companies; it's a family-owned business with deep roots dating back to 1933.
The reputation of Southern Glazer’s is well-established, and it's no surprise that we are regularly recognized for our culture. Southern Glazer’s has been recognized by Newsweek as one of America’s Greatest Workplaces for Inclusion and Diversity, as well as for Women and Parents and Families. These accolades speak volumes about our commitment to creating a supportive and inclusive culture of belonging for all employees.
As a full-time employee, you can choose from a wide-ranging menu of our Top Shelf Benefits, including comprehensive medical and prescription drug coverage, dental and vision plans, tax-saving Flexible Spending Accounts, disability coverage, life insurance plans, and a 401(k) plan. We also offer tuition assistance, a wellness program, parental leave, vacation accrual, paid sick leave, and more.
By joining Southern Glazer’s, you would be part of a team that values excellence, innovation, and community. This is more than just a job – it's an opportunity to build the future of beverage distribution and grow with a company that truly cares about its people.
OverviewThe Sales Consultant represents Southern Glazer’s in the market as a member of the Southern Glazer’s family. This individual is passionate, innovative, and self-motivated with a business-oriented and customer-focused mindset. The Sales Consultant’s primary responsibilities are to visit the customer, have the right consultative sales conversations, and increase sales revenue. Face-to-face consultative selling built on trusting relationships drives maximum value to our customer and supplier partners as well as to the SGWS organization.
Primary Responsibilities- Build positive, credible, lasting customer relationships based on trust
- Discover and identify customer business growth needs
- Develop a customer business growth plan for each account and build a pipeline of selling opportunities to drive incremental sales above base business
- Analyze data and insights to increase sales, grow customer business, and better achieve objectives
- Regularly and consistently pre-plan account visits with an agenda, service purpose, and selling opportunities documented in CRM (Proof)
- Prioritize sales activities to achieve objectives based on each customer business growth plan
- Visit accounts regularly, capture visit notes, and build visit plans considering previous visit outcomes and document in CRM (Proof)
- Maintain deep knowledge of SGWS products and correctly present and position them in each account
- Propose selling solutions to each customer and win the sale using consultative selling skills
- Achieve internal SGWS and supplier objectives as prioritized by management
- Manage customer issue resolution, seek additional opportunities to support the customer’s needs, and support business growth by providing customers with useful information and guidance
- Adapt the selling approach based on each customer’s buying styles and individual business needs
- Be knowledgeable and experienced in all accounts staying current with what competitors are offering and how SGWS products are positioned relative to the competition
- Document and maintain account- and customer-specific information in CRM (Proof)
- Participate in sales meetings, on-site training, and supplier events as required
- Perform other duties as assigned
- 21 years or older
- Able to analyze and understand data and information
- Able to leverage SGWS technology to perform duties and responsibilities
- Able to build and structure customer presentations and product proposals
- Proficient in using mobile devices (e.g., iPad®, smartphone) and online communication techniques (email, posting, texting, etc.) in a professional manner
- Able to consistently achieve results, even under tough circumstances
- Able to take responsibility for own actions and results; commits to providing a consistently high level of service to customers, suppliers, colleagues, and management
- Able to communicate effectively through various methods and express self clearly and concisely while appropriately tailoring the message to the audience
- Able to be nimble in ambiguity; be open to change; embrace innovative ideas
- Team player; works collaboratively with others
- Able to work in a fast-paced, results-driven environment
- Must possess a reliable vehicle, a valid driver’s license, and the ability to obtain and maintain auto liability insurance on their vehicle in compliance with SGWS company requirements.
- High School Diploma or GED required
- Able to travel as needed
- Must be at least 21 years of age
- Physical demands with activity or condition for a considerable amount of time may include sitting and typing/keyboarding using a computer (e.g., keyboard, mouse, and monitor) or mobile device
- Physical demands with activity or condition may include walking, bending, reaching, standing, squatting, and stooping
- Physical demands with activity or condition for a considerable amount of time include driving throughout the day with segments up to 2 hours
- May require lifting/lowering, pushing, carrying, or pulling up to 56lbs
This position is deemed a safety-sensitive position. As such, any person who is given a conditional offer of employment will be required to pass a drug test.
EEO StatementSouthern Glazer's Wine and Spirits, an Affirmative Action/EEO employer, prohibits discrimination and harassment of any type and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. SGWS complies with all federal, state and local laws concerning consideration of a qualified applicant's arrest and/or criminal conviction records. Southern Glazer's Wine and Spirits provides competitive compensation based on estimated performance level consistent with the past relevant experience, knowledge, skills, abilities and education of employees. Unless otherwise expressly stated, any pay ranges posted here are estimates from outside of Southern Glazer's Wine and Spirits and do not reflect Southern Glazer's pay bands or ranges.
If you have any questions or concerns about whether this posting complies/adheres with local pay transparency requirements, please contact the SGWS talent acquisition team at
\
permanent
Telecommute Testing Engineer
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
permanent
Remote Performance Test Engineer
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
permanent
C
Dental Hygienist
✦ New
Salary not disclosed
Dental Hygienist
Complete Smiles Dentistry
Full-Time Position!
Hello Fort Worth!! Complete Smiles Dentistry is actively seeking a Dental Hygienist to join our team. Support our mission to providing excellent dental care in the community and help us create more smiles and memorable experiences. Join a team that believes in teamwork and truly cares about their patients. Discover your opportuntiy to make an impact today!
- Tuesday-Friday Schedule!
- Competitive benefits including health insurance and retirement savings plans, six paid holidays and PTO (paid time off)
- GET PAID DAILY!
- Continuing education to provide you opportunity to develop your full potential and enhance your clinical skills to provide education and care to your patients.
- Access to an expansive network of mentors with 1:1 hygiene mentorship support and networking opportunities available at your fingertips.
- Unparalleled business support and the highest quality supplies and labs to deliver exceptional patient care.
- Opportunity to be a part of a secure company with 20+ years of industry leading experience that provides a stable career with unlimited growth potential
As a Dental Hygienist at Complete Smiles Dentistry, you’ll be recognized as an elite clinical provider and patient advocate. You’ll be an integral member of the patient care team, giving your patients the time and care they need, deserve and desire. With best-in-class support through our robust Hygiene mentor program and unparalleled educational offerings to enhance your clinical skills – you’ll be 100% supported as you provide exceptional lifetime care to your patients!
What is DailyPay?
DailyPay is an optional benefit that allows you to get your pay any time before payday and easily track how much you’re making. It’s an upgrade to your existing payroll system
that allows you to access some of your pay faster than you’d otherwise be able to.
DailyPay gives you the tools and resources to help you meet your financial goals.
As an elite clinical provider and patient advocate at Complete Smiles Dentistry, you’ll receive best in class non-clinical support to provide exceptional lifetime patient care while obtaining unparalleled education to enhance your clinical skills. You’ll work in an environment that encourages full clinical autonomy, giving your patients the time and attention they need, with the ability to tap into a hygiene mentor program. You’ll work a schedule that inspires work life balance and receive competitive benefits. Provide outstanding patient care, invest in your community, and do it all with the support you need.
Complete Smiles Dentistry is unique to the community and the patients they serve. With the support of a practice manager, a highly trained team on site, coupled with a vast network of experts across the nation, you’ll be completely connected to all the resources and support of Heartland Dental.
- Join an 8 person team that thrives on collaboration, communication and community
- We’re located at 220 S Denton Tap Road, Suite 103, Coppell, TX 75019
Minimum Qualifications
- Current dental hygienist license in Texas and an Associate’s or Bachelor’s degree in dental hygiene (where required)
- Excellent working knowledge of dentistry, dental hygiene procedures, dental patient screening and medical history documentation
- CPR Certification
Preferred Experience
- Experience using Velscope, Diagnodent, digital scanner, digital x-rays and electronic medical record systems
- Desire to continue learning and grow clinical skills to meet needs of patients and provide preventative care and overall maintenance of patients’ dental health
- Clinical needs as required by office
Physical Requirements
- Ability to perform essential duties as deemed necessary by the Office/ Doctor/ Heartland Dental with or without reasonable accommodation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the position
- Prolonged periods sitting and standing
- Must be able to lift and carry up to 45 pounds at times
- Availability to attend virtual training sessions (or in-person) periodically throughout the year
At Heartland Dental, we’re committed to living our core values which promote diversity and inclusion. We provide all employees and applicants for employment the protections of federal, state, and local laws affording equal opportunity in employment.
Powered by SonicJobs (an advertiser on Veritone). By applying, you consent to share your data with SonicJobs and the employer. Veritone or SonicJobs does not store or use your application data beyond facilitating the application.
See Heartland Dental Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at Category:Healthcare, Keywords:Dental Hygienist, Location:Coppell, TX-75019
Complete Smiles Dentistry
Full-Time Position!
Hello Fort Worth!! Complete Smiles Dentistry is actively seeking a Dental Hygienist to join our team. Support our mission to providing excellent dental care in the community and help us create more smiles and memorable experiences. Join a team that believes in teamwork and truly cares about their patients. Discover your opportuntiy to make an impact today!
- Tuesday-Friday Schedule!
- Competitive benefits including health insurance and retirement savings plans, six paid holidays and PTO (paid time off)
- GET PAID DAILY!
- Continuing education to provide you opportunity to develop your full potential and enhance your clinical skills to provide education and care to your patients.
- Access to an expansive network of mentors with 1:1 hygiene mentorship support and networking opportunities available at your fingertips.
- Unparalleled business support and the highest quality supplies and labs to deliver exceptional patient care.
- Opportunity to be a part of a secure company with 20+ years of industry leading experience that provides a stable career with unlimited growth potential
As a Dental Hygienist at Complete Smiles Dentistry, you’ll be recognized as an elite clinical provider and patient advocate. You’ll be an integral member of the patient care team, giving your patients the time and care they need, deserve and desire. With best-in-class support through our robust Hygiene mentor program and unparalleled educational offerings to enhance your clinical skills – you’ll be 100% supported as you provide exceptional lifetime care to your patients!
What is DailyPay?
DailyPay is an optional benefit that allows you to get your pay any time before payday and easily track how much you’re making. It’s an upgrade to your existing payroll system
that allows you to access some of your pay faster than you’d otherwise be able to.
DailyPay gives you the tools and resources to help you meet your financial goals.
As an elite clinical provider and patient advocate at Complete Smiles Dentistry, you’ll receive best in class non-clinical support to provide exceptional lifetime patient care while obtaining unparalleled education to enhance your clinical skills. You’ll work in an environment that encourages full clinical autonomy, giving your patients the time and attention they need, with the ability to tap into a hygiene mentor program. You’ll work a schedule that inspires work life balance and receive competitive benefits. Provide outstanding patient care, invest in your community, and do it all with the support you need.
Complete Smiles Dentistry is unique to the community and the patients they serve. With the support of a practice manager, a highly trained team on site, coupled with a vast network of experts across the nation, you’ll be completely connected to all the resources and support of Heartland Dental.
- Join an 8 person team that thrives on collaboration, communication and community
- We’re located at 220 S Denton Tap Road, Suite 103, Coppell, TX 75019
Minimum Qualifications
- Current dental hygienist license in Texas and an Associate’s or Bachelor’s degree in dental hygiene (where required)
- Excellent working knowledge of dentistry, dental hygiene procedures, dental patient screening and medical history documentation
- CPR Certification
Preferred Experience
- Experience using Velscope, Diagnodent, digital scanner, digital x-rays and electronic medical record systems
- Desire to continue learning and grow clinical skills to meet needs of patients and provide preventative care and overall maintenance of patients’ dental health
- Clinical needs as required by office
Physical Requirements
- Ability to perform essential duties as deemed necessary by the Office/ Doctor/ Heartland Dental with or without reasonable accommodation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the position
- Prolonged periods sitting and standing
- Must be able to lift and carry up to 45 pounds at times
- Availability to attend virtual training sessions (or in-person) periodically throughout the year
At Heartland Dental, we’re committed to living our core values which promote diversity and inclusion. We provide all employees and applicants for employment the protections of federal, state, and local laws affording equal opportunity in employment.
Powered by SonicJobs (an advertiser on Veritone). By applying, you consent to share your data with SonicJobs and the employer. Veritone or SonicJobs does not store or use your application data beyond facilitating the application.
See Heartland Dental Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at Category:Healthcare, Keywords:Dental Hygienist, Location:Coppell, TX-75019
Not Specified
V
Assistant Manager
✦ New
$20
What You’ll Do:
As an Assistant Service Center Manager (ASCM), you are the right hand of the Service Center Manager. You are
responsible for taking the lead in helping build a high-performance team capable of differentiating Valvoline Instant Oil
Change’s (VIOC) service experience from all other providers. In addition to working on cars and taking care of our
guests, you will advise, train, and supervise hourly employees.
At VIOC, “It all starts with our people.” Creating a diverse and welcoming workplace with team members from varied backgrounds and experiences is our highest priority. People of color, women, LGBTQIA+, veterans, and persons with disabilities are strongly encouraged to apply.
The perks and benefits we’ll provide you*:
- Competitive weekly pay - $20 per hour
- Paid on-the-job training – No previous automotive experience is required
- Flexible work schedule: No late evenings or holidays
- Paid time off (PTO), and holiday pay
- Tuition and certification assistance and access to a FREE online university
- Medical and prescription drug coverage – with Health Savings Account contributions
- Dental, vision, and 401(k) savings plans – 100% match up to 5%
- We promote from within – a commitment we are passionate about
- Back-up Child and Elder Care
- Company provided uniforms and tools
- 50% discount on Valvoline Instant Oil Change automotive services
*Terms and conditions apply, and benefits may differ depending on location
How you'll make a difference:
- Perform oil changes and additional car maintenance services
- Assist the Service Center Manager (SCM) in the daily operation and oversight of the service center
- Deliver a positive first impression to each guest with a warm and friendly greeting
- Build trust and win repeat, loyal customers
- Support the SCM with inventory, labor management, and financial performance of the service center
- Mentor, lead, and train the team to optimize their development
- Help maintain a clean, well-organized service center and facilitate a safe and secure working environment
- Become familiar with Environmental, Health & Safety compliance and other policies and procedures
What you'll need to succeed:
- Six months of supervisory experience required, preferably in a retail environment
- Knowledge of cash handling, facility, and safety control policies and practices
- Ability to occasionally lift up to 50 pounds
- Be able to stand for extended periods of time and climb stairs
- Comfortable working in a non-climate-controlled environment
- Have full mobility and can twist, stoop, and bend
- High school diploma or equivalent
- English fluency in reading, writing, and speaking
How you'll advance in your career:
At Valvoline Instant Oil Change (VIOC), your roadmap to career advancement is limitless! Click here to learn more and
to hear from some of our ‘Vamily’ members. With an award-winning training program, commitment to safety, and fair
and honest values, we’re here to help you reach every milestone.
Valvoline is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.
The Company endeavors to make its recruitment process accessible to any and all users. Reasonable accommodations will be provided, upon request, to applicants with disabilities in order to facilitate equal opportunity throughout the recruitment and selection process. Please contact Human Resources at 1.833.VVV.Report or email to make a request for reasonable accommodation during any aspect of the recruitment and selection process. This contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications.
permanent
OB Hospitalist Physician
✦ New
Salary not disclosed
Description
Specialization:
Obstetrics and Gynecology
Job Summary:
Medical City Lewisville is seeking a full-time, board-certified Obgyn to join a high-performing OB Hospitalist team in a role that offers flexibility, professional support, and meaningful impact. This is a wonderful opportunity for physicians who enjoy hospital-based practice and are looking for a collaborative and empowering environment. Qualified Candidates:- 24-hour shifts
- No on-call duties
- Flexible, predictable scheduling designed to support work-life balance
- Physicians are required to work a minimum average of six shifts per month (18 shifts per quarter)
- First assists available to support both OB hospitalists and private physicians
- Strong, reliable back-up call system
- Provide emergency OB care, unassigned OBED and gynecological coverage, and assist with private MD emergencies
- Supported by highly experienced operational and clinical teams to ensure your success
- Join a cohesive, collaborative, and energetic group of hospitalists who value trust, communication, and teamwork
- Guaranteed hourly rate
- Extra shift incentive pay is available
- Holiday pay incentives
- Employment agreement through Physician Services Group
- Comprehensive malpractice coverage
- Rich benefits package including health, dental, vision, disability, and 401(k)
- CME, dues, and professional subscription allowance
- Relocation assistance available
- Texas is a tort reform state with no state income tax
- 186-bed full-service acute care hospital
- Level III NICU
- Level II Maternal Designation
- Level III Trauma Center
- 1,898 deliveries/year
- Women’s Choice Awards for Bariatric Surgery, Emergency Care, Mammogram, Obstetrics, Patient Safety and Stroke Center 2023
- DFW Child Readers – Best Hospital to Have a Baby 2021-2024
Not Specified
Home Care Registered Nurse (RN) - Night Shifts Needed - Sign-on Bonus
✦ New
$28 - 37
Registered Nurse (RN) Pediatric Home Health A Nursing Role Built for Focused, One-on-One Care
At Care Options for Kids, pediatric home health nursing is intentionally different. Instead of juggling multiple patients, alarms, and constant interruptions, you provide dedicated, one-on-one care in the home, allowing you to focus fully on your patient and use your clinical judgment with confidence.
In this role, you'll care for pediatric patients with high acuity needs while building consistent relationships with both the child and their family. Nurses who thrive here value autonomy, continuity of care, and the ability to deliver skilled nursing in a calm, controlled environment, backed by real clinical support whenever it's needed
If you're an RN looking for a role where you can practice nursing with focus, purpose, and support, this position was designed with you in mind.
Care Options for Kids Benefits
~ Weekly Pay and Direct Deposit
~ Paid Time Off (PTO) and flexible scheduling
~ Medical, Dental, and Vision Insurance
~401(k) Retirement Plan
~ Employee Referral Bonus Opportunities
~ Career Advancement Opportunities
~ Training and Competency Development
~ Respiratory Therapists on Staff to Provide Training and Mentorship
~24/7 On-Call Clinical Support
Support That Keeps You Safe and Confident
~ Easy-to-use Employee Portal that puts you in control, request shifts that fit your schedule and preferences, earn Care Bucks rewards, and stay connected to the COFK community.
~24/7 on-call clinical support whenever you need it
~ Training and competency support for high-acuity care
~ Clear care plans and physician orders
~ PPE provided in every home, including masks, gloves, and hand sanitizer, with care aligned to CDC safety guidelines
~ A dedicated team focused on nurse safety and success
Requirements
Current, active Texas RN license
Current BLS CPR card (obtained in-person, not online)
G-tube, trach, vent experience, or willing to train
Care Options for Kids is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
#RDNUFW
Salary:
$28.00 - $37.00 / hour
At Care Options for Kids, pediatric home health nursing is intentionally different. Instead of juggling multiple patients, alarms, and constant interruptions, you provide dedicated, one-on-one care in the home, allowing you to focus fully on your patient and use your clinical judgment with confidence.
In this role, you'll care for pediatric patients with high acuity needs while building consistent relationships with both the child and their family. Nurses who thrive here value autonomy, continuity of care, and the ability to deliver skilled nursing in a calm, controlled environment, backed by real clinical support whenever it's needed
If you're an RN looking for a role where you can practice nursing with focus, purpose, and support, this position was designed with you in mind.
Care Options for Kids Benefits
~ Weekly Pay and Direct Deposit
~ Paid Time Off (PTO) and flexible scheduling
~ Medical, Dental, and Vision Insurance
~401(k) Retirement Plan
~ Employee Referral Bonus Opportunities
~ Career Advancement Opportunities
~ Training and Competency Development
~ Respiratory Therapists on Staff to Provide Training and Mentorship
~24/7 On-Call Clinical Support
Support That Keeps You Safe and Confident
~ Easy-to-use Employee Portal that puts you in control, request shifts that fit your schedule and preferences, earn Care Bucks rewards, and stay connected to the COFK community.
~24/7 on-call clinical support whenever you need it
~ Training and competency support for high-acuity care
~ Clear care plans and physician orders
~ PPE provided in every home, including masks, gloves, and hand sanitizer, with care aligned to CDC safety guidelines
~ A dedicated team focused on nurse safety and success
Requirements
Current, active Texas RN license
Current BLS CPR card (obtained in-person, not online)
G-tube, trach, vent experience, or willing to train
Care Options for Kids is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
#RDNUFW
Salary:
$28.00 - $37.00 / hour
permanent
Home Care - Licensed Practical Nurse - Night Shift
✦ New 🏢 Care Options for Kids
$28 - 37
Registered Nurse (RN) Pediatric Home Health A Nursing Role Built for Focused, One-on-One Care
At Care Options for Kids, pediatric home health nursing is intentionally different. Instead of juggling multiple patients, alarms, and constant interruptions, you provide dedicated, one-on-one care in the home, allowing you to focus fully on your patient and use your clinical judgment with confidence.
In this role, you'll care for pediatric patients with high acuity needs while building consistent relationships with both the child and their family. Nurses who thrive here value autonomy, continuity of care, and the ability to deliver skilled nursing in a calm, controlled environment, backed by real clinical support whenever it's needed
If you're an RN looking for a role where you can practice nursing with focus, purpose, and support, this position was designed with you in mind.
Care Options for Kids Benefits
~ Weekly Pay and Direct Deposit
~ Paid Time Off (PTO) and flexible scheduling
~ Medical, Dental, and Vision Insurance
~401(k) Retirement Plan
~ Employee Referral Bonus Opportunities
~ Career Advancement Opportunities
~ Training and Competency Development
~ Respiratory Therapists on Staff to Provide Training and Mentorship
~24/7 On-Call Clinical Support
Support That Keeps You Safe and Confident
~ Easy-to-use Employee Portal that puts you in control, request shifts that fit your schedule and preferences, earn Care Bucks rewards, and stay connected to the COFK community.
~24/7 on-call clinical support whenever you need it
~ Training and competency support for high-acuity care
~ Clear care plans and physician orders
~ PPE provided in every home, including masks, gloves, and hand sanitizer, with care aligned to CDC safety guidelines
~ A dedicated team focused on nurse safety and success
Requirements
Current, active Texas RN license
Current BLS CPR card (obtained in-person, not online)
G-tube, trach, vent experience, or willing to train
Care Options for Kids is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
#RDNUFW
Salary:
$28.00 - $37.00 / hour
At Care Options for Kids, pediatric home health nursing is intentionally different. Instead of juggling multiple patients, alarms, and constant interruptions, you provide dedicated, one-on-one care in the home, allowing you to focus fully on your patient and use your clinical judgment with confidence.
In this role, you'll care for pediatric patients with high acuity needs while building consistent relationships with both the child and their family. Nurses who thrive here value autonomy, continuity of care, and the ability to deliver skilled nursing in a calm, controlled environment, backed by real clinical support whenever it's needed
If you're an RN looking for a role where you can practice nursing with focus, purpose, and support, this position was designed with you in mind.
Care Options for Kids Benefits
~ Weekly Pay and Direct Deposit
~ Paid Time Off (PTO) and flexible scheduling
~ Medical, Dental, and Vision Insurance
~401(k) Retirement Plan
~ Employee Referral Bonus Opportunities
~ Career Advancement Opportunities
~ Training and Competency Development
~ Respiratory Therapists on Staff to Provide Training and Mentorship
~24/7 On-Call Clinical Support
Support That Keeps You Safe and Confident
~ Easy-to-use Employee Portal that puts you in control, request shifts that fit your schedule and preferences, earn Care Bucks rewards, and stay connected to the COFK community.
~24/7 on-call clinical support whenever you need it
~ Training and competency support for high-acuity care
~ Clear care plans and physician orders
~ PPE provided in every home, including masks, gloves, and hand sanitizer, with care aligned to CDC safety guidelines
~ A dedicated team focused on nurse safety and success
Requirements
Current, active Texas RN license
Current BLS CPR card (obtained in-person, not online)
G-tube, trach, vent experience, or willing to train
Care Options for Kids is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
#RDNUFW
Salary:
$28.00 - $37.00 / hour
permanent
M
Mobile Podiatrist
✦ New
$180,000
We are looking for a podiatrist with a State of Texas podiatry license to join our multispecialty practice based out of Addison, TX.
We do tight route planning and have a medical assistant to either do the driving or help with the charts (depending on what is most needed by the dpm).
The work week is based upon a 5 day work week (4 days in the field and 1 flex day for completion of any outstanding progress notes, urgent cases, or surgeries).
Not Specified
jobs by
✓ All jobs loaded