Jobs in Burien Washington

Border Patrol Agent (BPA) Entry Level

NEW RECRUITMENT AND RETENTION INCENTIVES!

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.

Salary and Benefits

Annual Base Salary for newly appointed BPAs varies per grade, as follows:

GL-5/GL-7 $49,739 - $89,518 per year

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
• Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

• Make sound judgments and decisions in the use of firearms.
• Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
• Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

A well-regarded mid-sized law firm in Seattle is seeking a fully remote Corporate Attorney to join their existing team. This highly collaborative, employee-driven firm focuses on providing incisive, industry-driven legal counsel to technology, media, and emerging online businesses. This is a great opportunity to join a lower billable firm (800-1000) focused on providing an ideal work environment to their employees.

Salary and Benefits:

The estimated base salary range for this position is $120,000 to $280,000 depending on experience and book of business. Benefits include medical, dental, vision, and life insurance (100% firm-paid employee premiums); participation in the firm's 401(k) plan with a match; unlimited PTO; nine paid holidays and other perks.

Key Responsibilities include:

• Counseling clients on business operations, asset acquisitions, mergers matters and business disputes.
• Handling and contributing to cases advising startups and small-to-midsize businesses, mainly focusing on corporate formation and governance matters, commercial transactions, debt and equity financings, mergers and acquisitions, and other business operations.
• Collaborating with colleagues across practice areas to ensure superior client outcomes.

Requirements:

• Licensed and in good standing with the WA State Bar.
• 4+ years' experience with corporate matters
• Strong legal drafting, negotiation, and communication skills.
• Collaborative team player with the ability to work independently when needed.
• Capable of working in a fully remote environment.

Litigation Legal Assistant

Location: Seattle, WA (HYBRID) 2 days on-site, 3 WFH

Salary: $95,000–$110,000

LHH is working with a mid-sized, high-volume litigation practice that is seeking an experienced Litigation Legal Assistant with 7+ years of heavy trial desk experience. Ideal candidates will have a background in general litigation, white collar, employment, business contract disputes, product liability, or aeronautics. Defense-side personal injury experience is also acceptable.

Key Responsibilities

• Manage a litigation desk of 50–60 active cases
• Draft, revise, and finalize pleadings and other legal documents
• Perform daily/weekly e-filing in state, federal, and appellate courts
• Maintain attorney calendars and docket all critical deadlines
• Schedule depositions, hearings, and litigation-related appointments
• Handle client and third-party communications (phone/email)
• Coordinate travel arrangements
• Post attorney time and assist with billing processes
• Provide general administrative and executive-level support
• Support 3–5 trials per year

Candidate Requirements

• Minimum 7+ years as a litigation legal assistant in a mid-sized or large firm, or supporting a heavy trial desk
• Strong e-filing experience across WA state, federal, and appellate courts
• Strong calendaring/docketing skills
• Ability to work independently with minimal supervision
• High level of professionalism and ability to handle confidential information
• Successful completion of a background check
• Completion of skills testing (typing speed, Word proficiency, etc.)

Benefits

• Medical: $500 deductible, 90/10 coverage
• HSA: Firm contributes $1,500/year
• Retirement:
• 401(k) eligible immediately
• 3% safe harbor + match up to 4%
• 3.5% profit sharing
• PTO:
• 2 weeks PTO (accrued immediately)
• 3 weeks after 5 years (usable after 90 days)
• Transportation: Parking reimbursement or transit reimbursement (bus/ORCA/ferry)

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to

The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

• The California Fair Chance Act

• Los Angeles City Fair Chance Ordinance

• Los Angeles County Fair Chance Ordinance for Employers

• San Francisco Fair Chance Ordinance

Fenagh Engineering and testing provides special inspections, materials testing, and geotechnical engineering services for a wide array of private and public sector clients.

We are seeking a full-time Quality Control Manager to join our Seattle team.

Responsibilities

• Review and oversee daily field reports from inspectors for accuracy and completeness, and perform required submission of reports to client/ contractor reporting portal
• Ensure field staff follow correct testing procedures per project specifications (Sound Transit, WSDOT, ACI, ASTM, etc.)
• Attend Pre-construction meeting contractor and building officials, Pre-Activity meetings with contractor/client. Review/Pass on information to the company as needed.
• Perform quality reviews of field and lab reports prior to client submittal
• Coordinate with project managers and dispatch to ensure proper staffing and coverage
• Act as point of contact for field technicians regarding testing procedures, report issues, and field challenges
• Maintain up-to-date certifications required for project oversight (WABO, ACI, ICC, etc.)
• Review inspection schedules to ensure timely coverage of required testing
• Flag non-conforming work and follow up with corrective action documentation
• Communicate with clients and contractors as needed to clarify scope or resolve field issues
• Provide coaching and feedback to field staff to ensure high-quality performance
• Track and ensure compliance with project-specific reporting requirements
• Support lab staff in sample intake, testing, and reporting as needed
• Assist with invoicing support (e.g., confirming inspection dates/hours, equipment usage)

Requirements

• 10+ years experience in a QC Inspector or QC Manager Role for Sound Transit, WSDOT or related projects.
• WABO RC, PC, PA, PI and ICC RC, PT, certifications or more recommended. WAQTC Certifications for Soils and Asphalt are recommended.

Who is CenTrio?

CenTrio is a fully integrated, innovative and sustainable energy services provider to a wide range of industries such as higher education & healthcare campuses, cities, and communities. It serves more with utility infrastructures serving more than 170+ million square feet of space and operations in 10 cities across the United States and growing. In each community, the company operates highly efficient and innovative utility infrastructures that produce and distribute electricity, steam, hot water and/or chilled water to customer buildings and campuses. Customers connected to these systems enjoy multiple benefits including reduced operating costs, lower emissions and unmatched reliability. CenTrio is a wholly owned subsidiary of a global Infrastructure Investment Consortium with unmatched financial wherewithal and manages a portfolio of long-life, high quality infrastructure assets with high barriers to entry that generate stable and growing cash flows.

Job Summary

The Steam Plant Manager will be a key member of the Seattle team, reporting directly to the General Manager. This position is responsible for all Operations and Maintenance (O&M) activities, ensuring the safe, efficient, and compliant operation of the steam plant. The Steam Plant Manager will maintain adequate staffing, tools, equipment, and spare parts to support continuous operations, while providing effective leadership and strategic planning to achieve business and performance objectives.

A successful candidate for this position is a self-starter who thrives in a fast-paced environment, demonstrates a strong commitment to deadlines and teamwork, is process-oriented with a high sense of ownership, possesses a keen intellectual curiosity, and has a solid foundation in plant management.

Core Responsibilities

• Provides first line management and supervision for all plant supervisory and maintenance personnel.
• Oversee the implementation of strategic plans, programming, and steam plant production strategies, to ensure the reliable and economic delivery of steam to customers.
• Plan and organize all facets of the day-to-day operations to meet short- and long-range goals and objectives.
• Ensure compliance with state and federal laws and regulations and company policies and operating procedures.
• Ensures that operation and maintenance activities generally conform to fiscal, budgetary, planning objectives and assist with the development of budgets and/or capital planning.
• Supervise plant personnel, which includes work allocation, training, and problem resolution; evaluates performance and makes recommendations for personnel actions; motivates employees to achieve peak productivity and performance.
• Manage and oversee the operation, maintenance and repairs of associated infrastructure systems, such as water supply, natural gas, electrical, steam and condensate.
• Assist in the creation of short and long-term operating plans that include projections for fuel, electricity, and water use, maintenance plans, and capital plans.
• Analyzes department operations, implements and executes optimized economic operating plans, and makes recommendations for significant operational improvements as appropriate.
• Oversee the implementation of safety and environmental programs, to include training and reporting, to ensure departmental compliance with established safety policies, procedures, and regulations.
• Responsible for the management of outside vendors and contractors
• Participates in the development of objectives and policies designed to maximize efficiency and economy in the operation of equipment and production services.
• Oversee the implementation of major and minor renovation, renewal, and capital projects.
• May serve on various company planning and policy making committees.
• Partner with HR to ensure that the CBA is followed.
• May be required to travel for training and/or other company business. This includes travel by private automobile, commercial airlines, and other public transportation.
• Will be required to effectively interface with regulatory, business and customer representatives consistent with CenTrio corporate objectives.
• May be required to operate company equipment (e.g. forklift)
• May be required to perform other duties and projects as directed.

Professional Experience & Knowledge:

• Experienced in working with district energy systems preferred
• Experienced in working in a unionized environment preferred
• Budget preparation and fiscal management knowledge
• Advanced knowledge and understanding of utility plant engineering and operations
• Ability to foster a cooperative work environment
• Experienced with project planning
• Knowledge of utility business practices, methods, and procedures
• Knowledge of staff hiring procedures
• Knowledge of federal, state, and local construction, boiler operation, electrical, potable water, electrical, and safety regulations, protocols, and procedures
• Knowledge of organizational structure, workflow, and operating procedures
• Ability to analyze expenditures for compliance with budget provisions
• Ability to manage and supervise renovation, renewal, and capital projects

Technical Skills & Requirements:

• City of Seattle Steam Engineer’s license or the demonstrated ability to obtain one within one year of hire.
• Bachelor’s degree, High School diploma or GED Equivalent, and a minimum of 5-years of full-time supervisory experience within a steam plant
• Ability to read, understand, follow, and enforce safety procedures.
• Ability to supervise and train employees, to include organizing, prioritizing, and scheduling work assignments.
• Skilled in organizing resources and establishing priorities.
• Skilled in examining and re-engineering operations and procedures, formulating policy, and developing and implementing new strategies and procedures.
• Skilled in capital, operations, and maintenance planning.
• Employee development and performance management skills.
• Knowledge of computerized maintenance management systems, with reference to work orders, preventive maintenance, inventory control, and equipment history.

Physical Requirements:

• Must be able to work in tight spaces and elevated positions: twisting, turning, bending, and holding arms at / above the head are all common movements; able to lift up to 100lbs;
• Must be able to clearly see and differentiate all colors
• Must be able to maintain standard threshold of hearing to safely perform job duties
• Must have good eyesight, hearing and manual dexterity
• Wear all types of PPE including hearing protection, eye protection, all types of hand protection, steel toe footwear, head protection, wear fall-protection, half-face and full-face respirators

Why Join CenTrio?

CenTrio offers a dynamic and friendly work environment, dedicated to nurturing a top-notch team culture! Additionally, CenTrio offers an array of fabulous benefits and perks.

• Medical Benefits first day of hire
• Medical, dental, vision, Life & AD&D benefits
• Option of supplemental Life & AD&D benefits
• Company paid High-Deductible Healthcare Benefit Plan
• 401k plan with 5% match
• Training Opportunities and career progression
• Competitive salaries that reflect the value of skills and experience
• Dynamic and friendly work environment in a rapidly expanding industry with a national presence
• Remote, Hybrid, and In Office schedules available dependent on job responsibilities
• 24-hour Employee Assistance Program/Hotline
• Corporate discounts (Travel, Entertainment, Home, Auto, Apparel, Health and Wellbeing, and other various retail options)

Conditions of Employment:

• Valid Washington State Driver’s License
• Only authorized employees are permitted to use company vehicles, this includes Industrial trucks (forklifts, scissor lifts, etc.) and electric vehicles/golf carts. To be an authorized employee, you must be at least 21 years old, hold a current valid Washington Drivers' license and demonstrate a clean driving record. The driver must be on an approved list for company insurance purposes. Your driving record will be screened as part of the pre-employment process and annually in December.
• All certifications/licences must be up to date
• CenTrio strives to create a culture of health and wellness. As of December 1, 2021, and consistent with applicable state law, CenTrio will decline to hire individuals who use nicotine products. (WASHINGTON, COLORDAO, MICHIGAN, and TEXAS)

Health, Safety & Environment (HSE)

CenTrio maintains a steadfast commitment to a proactive safety culture, with HSE being a collective responsibility throughout the organization. Your HSE accountability also encompasses:

• Promote, ensure, and maintain a safe and healthy environment for your fellow workers and yourself so that everyone goes home injury-free
• Work in compliance with the provisions of the Occupational Health and Safety Act, Industrial Regulations, Environmental Protection Act and Regulations and HSE policies, programs, and procedures
• Responsible for identifying and reporting workplace HSE hazards and concerns to your supervisor immediately and providing solutions (if aware of any) to address these concerns as requested
• Immediate reporting of all work-related injuries/illness to your supervisor
• Adhere to various PPE requirements of the position which may include hearing protection, eye protection, hand protection, steel toe footwear, head protection, fall-protection, respirators (half-face and full-face)

About the job

Create your own destiny in the United States! 


On a Student Visa (F1) or OPT? Join our Green Card sponsorship program and receive a permanent Employment Authorization Document (EAD) and a Green Gard (EB-3 visa) and we will place you to work in a U.S. hospital. Please note the specific location of the job in this ad may differ from the location of available jobs.

Qualifications: Candidates must have a minimum BSN in nursing or be in the process of completing a BSN. Must have either passed the NCLEX-RN exam or about to take the test.

ADEX Medical Staffing is not a third-party representative or agent. We are your direct Green Card sponsor and employer. We pay all salaries and benefits. We place you at one hospital location that best matches your career goals for the duration of your contract with us.

Benefits of working with ADEX

When you join ADEX Medical Staffing, you’re joining a team dedicated to your continuous support while working and living in the United States. Here’s what we’re doing right now for our international nurses seeking placement in the US:

• NO COST TO YOU! All legal, U.S government processing fees, endorsement fees paid for by ADEX.
• Starting bonuses
• Travel stipend during relocation
• Subsidized Health Insurance Plan.
• Worker’s Compensation Insurance, Liability and Malpractice Insurance
• Seamless onboarding and extensive hospital orientation program

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

• Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
• Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

• Determine and/or develop methods where procedures may not be available.
• Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
• Operate, use and maintain overhead maintenance work platforms
• Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
• Inspect and maintain building runway rails and expansion joints.
• Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
• Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
• Maintain logs, charts, and perform written and verbal tie-in records.
• Prepare reports and schedules as required.
• Work with and assist employees of other classifications as required.
• Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

• 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
• Able to lift up to 35 pounds.

Preferred Qualifications:

• Experience inspecting and maintaining building runway rails and expansion joints.
• Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Test and Evaluation (BT&E) is seeking multiple Machinist Assemblers Precision to join our Machinist departments in either Seattle, WA or Tukwila, WA.

Machinists in this position participate in the design, fabrication and assembly of various production and research projects. Using a variety of precision machines (e.g., lathes, grinders, EDM, CNC and milling machines) to support aircraft engineering and production groups.

Position Responsibilities:

• Perform bench work (e.g., drilling, honing, tapping, reaming) on production and experimental parts, as required
• Assemble parts using rivets and bolts with correct tools such as rivet squeeze, lock bolt puller, rivet gun and bucking bar, power screwdriver, or ratchet per engineering requirements
• Lay-out, plan and sequence machining operation
• Analyze and interpret drawings, sketches, blueprints and verbal instructions to determine work to be performed on detailed precision parts (e.g., aircraft castings, fixtures, tools, shop aids)
• Use shop math, geometry and/or trig to calculate dimensions
• Determine/obtain raw material to be used (e.g., brass, aluminum, steel, composites, and wood) for machining or fabrication per drawing or customer requirements
• Set up operate and adjust all common machine tools (e.g., lathe, mill, bridgeport, electrical discharge machine (EDM), drill press) to accomplish work on precision assemblies
• Select machine to be used in machining process
• Check machine to be used for missing, loose, damaged equipment, check oil and coolant levels and fill, as required
• Write programs as required for multi axis machines
• Adjust machine settings (e.g., speeds and feeds) to correct machining problems or to prepare machine for next operation in sequence
• Perform minor editing of CNC programs per shop requirements
• Select and check cutting tools per program or CNC documents
• Ensure cutters are the correct type, length, diameter, radius, and are in good condition
• Select machine accessories and holding devises (e.g., chucks, vises, turntables)
• Verify that apparatus is in good condition
• Identify fixtures and/or shop aids to be built and fabricate as required using mill, lathe, bandsaw, drill press, sander and grinder
• Attach machine accessories, tools and shop aides using dial indicators, edge finders, wrenches, bolts, clamps, and overhead cranes
• Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter path, clearance and chips to ensure smooth operation
• Check work with precision instruments (e.g., micrometers, dial indicators, height gauges) and ensure parts are free from defects (e.g., finish, dimensions, mismatch, tool marks) and complete per drawing, sketch or verbal instructions
• Assemble, fit, check, test of developmental machine parts and assemblies to customer specification
• Troubleshoot and test precision assemblies with working groups (e.g., engineering, production, inspection, manufacturing resource & development (MRD)) to resolve tooling/production problems
• Handle and dispose of hazardous materials (e.g., coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment, as required
• Maintain personal tool certifications, as required
• Ability to use computers and knowledge and ability to use MSWord, Excel, Outlook, etc.
• Must be willing to work variable shifts, including weekends and overtime; some positions may also be rotating shifts

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):

• 1+ years of experience with multiple Computer-Aided Design (CAD) and/or Computer-Aided Manufacturing (CAM) applications (e.g. Mastercam, CATIA V5, Unigraphics, etc.)
• 1+ years of experience programing, setting-up and running lathes, grinders, mills, and Computer Numerical Control (CNC) machines
• Experience reading G and M codes

Preferred Qualifications (Desired Skills/Experience):

• Experience with ENOVIA design tool
• Completed training as a journeyman machinist
• Graduated from an Machinist Apprenticeship program or completed a Machining Certificate

Drug Free Workplace :

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

These positions are for either 1st or 2nd shift; however, there may be additional shift requirements to support program objectives.

Union:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $33.32/hour to start for new union members, with potential to earn up to $61.01/hour, at max pay

Applications for this position will be accepted until Mar. 21, 2026

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team. In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities

• Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.
• Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.
• Conduct continuity checks to ensure proper functionality of electrical systems.
• Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.
• Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling. Typically assigned work that has been previously sequenced.
• Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.
• Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.
• Perform hand forming of electrical wiring and soldering as required to complete work assignments.
• Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.
• Execute necessary riveting tasks as part of the assembly process.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in electrical assembly installation.
• 1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).
• 1+ years of experience handling chemicals and/or hazardous materials.
• Ability to recognize colors.
• Ability to work in confined spaces.
• Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.
• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:

• 1+ years of experience as an Electrician or Apprentice.
• Completion of an electrical trade school program or have military related electrical experience.
• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 09, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.