Jobs in Bailey Mississippi

Abacus Solutions Group is currently recruiting for an Inbound Operations Manager for a brand new warehouse opening in Southaven.

Job Summary: The Inbound Operations Manager (AM and PM SHIFT) provides leadership and oversight to a high-performing inbound department, ensuring the efficient and accurate receipt, inspection and put-away of product. This role is responsible to managing inbound workflows, dock scheduling, vendor compliance, and inventory integrity. The operations manager drives continuous improvement, supports lean practices, and ensures alignment with safety, quality, and service level standards.

Essential Duties & Responsibilities:

• Lead and direct the Inbound Operations team to achieve key goals in receiving, put-away, inventory accuracy, vendor compliance, and dock utilization
• Partner with the Senior Manager to influence strategic planning and execution
• Collaborate cross-functionally to ensure compliance with company policies and procedures
• Ensure facility compliance with all Federal, State, and local regulations.
• Promote a strong safety culture across all inbound operations
• Drive performance to meet daily, monthly, and annual productivity and quality targets
• Manage inbound operations to be cost-effective and scalable, while fostering a culture of continuous improvement
• Hire, train, and develop supervisors and leads; oversee performance management, coaching, and corrective actions
• Support the development and growth of direct reports
• Maintain full accountability for inbound operations across all shifts, including weekends if applicable
• Lead performance management and development programs for the inbound team
• Oversee quality control processes for inbound shipments, including damage checks and vendor compliance audits
• Promote lean practices and continuous improvement initiatives across inbound workflows
• Ensure all SOPs and training programs are current and effectively implemented
• Foster a culture of accountability, engagement, and associate empowerment
• Manage seasonal labor needs in partnership with staffing agencies and advise leadership on headcount planning
• Perform other duties as assigned by the Senior Manager

Qualifications:

• Bachelor’s degree preferred / HS Degree or GED required
• Experience working with process improvement ideologies, e.g., LEAN, Six Sigma, or similar / Six Sigma certification a plus
• Minimum of 4 years of progressive operations experience in a leadership role
• Experience leading up to 100+ associates
• Experience in creating productivity improvement through continuous improvement efforts
• Ability to be flexible, collaborative, and drive performance
• Analyze data to identify defects and root cause analysis
• Strong verbal and written communication skills

GRAMMER is specialized in developing and manufacturing components and systems for car interiors as well as driver and passenger seats for off-road vehicles, trucks, buses, and trains.

As a global partner to the vehicle manufacturing industry, we are represented around the world by our two divisions, Automotive and Commercial Vehicles. Our employees are constantly engaged in developing and producing innovative, flexible solutions to meet challenges in today’s competitive global market. GRAMMER can be found on four continents with more than 50 production, distribution and logistics sites in 20 countries.

GRAMMER is a leading North American full service automotive supplier of highly engineered thermoplastic components and assemblies for interiors and air and fluid management systems.

Culture:

Here at GRAMMER, we foster a culture that embraces our Grammer CODE: Collaborate in an inclusive environment, Openness in communication and ideas, Drive for results with energy and empower yourself and others by taking ownership of decisions and actions.

What we are looking for:

Grammer is looking for an Injection Mold Shop Supervisor to join our location in Shannon, MS. The ideal candidate will enjoy working in a team environment. This individual will have an opportunity to make lasting and positive changes in our team!

The Injection Mold Shop Supervisor is responsible for overseeing all aspects of injection mold repair, maintenance, and continuous improvement within the plant. This role ensures injection molds are built and maintained to meet production, quality, cost, and delivery targets while maintaining a safe, organized, and efficient work environment. The Injection Mold Shop Supervisor leads skilled trades, manages resources, and collaborates with Engineering, Production, Quality, and Supply Chain to support overall plant objectives.

What you will be doing:

• Plan, direct, and coordinate daily injection mold shop operations, including new mold builds, repairs, preventive maintenance, and modifications.
• Establish priorities and schedules to meet production demands, launch timelines, and downtime reduction goals.
• Ensure molds meet design specifications, quality standards, and customer requirements.
• Implement and sustain preventive and predictive maintenance programs for molds and tooling.
• Manage mold troubleshooting, root cause analysis, and corrective actions to minimize production interruptions.
• Collaborate with Engineering on mold design reviews, DFM/DFA feedback, and process improvements.
• Coordinate with Production and Maintenance to support efficient changeovers and startup readiness.
• Control mold shop budget, including labor, tooling, spare parts, outside services, and capital expenditures.
• Source and manage vendors for outsourced tooling, repairs, and components.
• Maintain accurate documentation, including mold history, PM records, work orders, and spare parts inventory.
• Drive continuous improvement initiatives (Lean, 5S, TPM) to improve safety, quality, delivery, and cost.
• Ensure compliance with company policies, safety regulations, and applicable environmental and regulatory requirements.

What you will bring along:

• 3-5 years experience in a similar role, preferably in the automotive industry.
• High school diploma or GED required
• Associate’s or bachelor’s degree in Tool & Die, Engineering, Manufacturing, or related field preferred.
• Strong knowledge of injection molding tooling (plastic), hot runners, cooling systems, steels, and mold components.
• Electrical knowledge of mold position signals and safeties, including wiring and troubleshooting proximity sensors, limit switches, and thermocouples.
• Experience with CNC machining, EDM, grinding, polishing, and mold assembly.
• Proven ability to lead teams, manage priorities, and meet urgent deadlines.
• Strong problem-solving, analytical, and root cause analysis skills.
• Proficient in reading and interpreting blueprints, CAD drawings, and GD&T.
• Familiarity with CMMS systems, ERP/MRP, and Microsoft Office.
• Ability to successfully interface and build positive working relationships with customers and team members.
• Self-driven, self-motivated and results oriented.
• Proven ability to multi-task successfully
• Proven ability to analyze data, documents, and situations analytically

What we can provide you:

• Medical, Dental, and Vision coverage
• Tuition reimbursement programs
• 401(k) match
• Robust EAP services
• Developmental opportunities
• Much more!

Panda Express managers can have the opportunity to embody an entrepreneurial spirit while learning from a very hands-on and fast-paced environment. As a General Manager, you will be in charge of a $1-2 million business and oversee the development of your team, ensuring guest satisfaction and running a profitable restaurant. From the hiring, managing and directing of associates to achieving financial goals and ensuring the delivery of exceptional guest experiences, you create your own success story. Because of this, Panda also offers a best in class compensation package, including uncapped profit sharing bonuses based on your growth.

To prepare you for success, all Panda leaders participate in a comprehensive 6+ week Store Leadership Training Program to help build the foundation to become a high performing and inspiring Leader at Panda. The program focuses on:

People Development: The ability to hire, train, coach and develop the right talent for your restaurant

Guest Experience: Upholding the highest food quality and guest service standards while developing marketing acumen

Financial: Ability to understand sales growth, cost management, and profit growth

Kitchen Management: Ensure food safety, maintain product inventory and develop the culinary skillset to prepare all entrees at the highest level

Operations: Maintain cleanliness, safety standards, and apply knowledge of all policies, procedures and practices

We offer our Full-Time Management Team:

• Progressive Compensation Package and Excellent Bonus Opportunity
• 5 or more Weeks of Comprehensive Training to prepare you for success
• On-Going Career & Leadership Development
• Medical, Dental, and Vision Insurance
• 401 K with Company Match
• Paid Time Off and Paid Holidays
• Associate Discounts (Panda Express, Hibachi San, Panda Inn plus Theme Parks) and free meals when you work
• Lucrative Associate Referral Bonus
• Pre-Tax Dependent Care Flexible Spending Account

GM starting at $75K/year + bonus. (Potential earning over $100K/year)

AM starting at $58K/year + bonus. (Potential earning over $75K/year)

About us:

Panda Express is part of Panda Restaurant Group, the world leader in Asian dining experiences that also includes Panda Inn and Hibachi-San. At Panda, we all share a common mission: "Deliver exceptional Asian dining experiences by building an organization where people are inspired to better their lives." Guided by this mission, we are a family dedicated to creating an organization that inspires better lives for our people and our communities in which we serve. Whether through sharing good food with guests or providing opportunities for professional and personal growth with associates, all are embraced in our genuine family environment that is uniquely Panda.

Panda was founded in 1983 in Glendale, California Panda Express is the largest family-owned American Chinese Restaurant concept in America. As America’s favorite Chinese restaurant, Panda Express has close to 2,400 locations globally and continues to grow over 100 restaurants annually.

* Named one of "America's Best Employers"

* Great Place to Work certified

* The Safest Restaurant Chain in the US during the pandemic

Requirements

Restaurant Manager Qualifications

Education and Experience:

• Associate’s degree
• Minimum one to two years of Operations experience
• Some leadership experience
• Must pass Cooking Test annually
• Must be flexible to move to a store within a radius of 50 miles from home
• Work a flexible schedule, including weekends

ADA Statement: While performing duties, counter areas are often hot with steam from steam table and food vapors. Work space is restricted and employees are expected to remain standing for long periods of time. Employees must prepare hot and cold foods, use Chinese cook knife and other kitchen equipment and work quickly without losing accuracy. Employees may be required to lift up to 50 lbs., stand up to four hours and reach across counter tops measured at 36 inches to serve customers. Kitchens are hot and noise levels are usually high; storage space is limited and shelving is high.

Panda Restaurant Group, Inc is an Equal Opportunity Employer.

Company Overview:

Howard Industries, Inc. is the nation’s leading manufacturer of distribution transformers, with over 10 million overhead, single-phase and three-phase pad mounted, and network transformers in service throughout the United States and abroad. As Mississippi's largest privately held employer headquartered within the state, the company employs over 5,000 team members, generates over $1 billion in revenue, and consists of three main corporate divisions: Howard Power Solutions, Howard Transportation, and Howard Technology Solutions.

Vision Systems Engineer (AI Specialist)

We are seeking a highly skilled Vision Systems Engineer to lead the integration and optimization of advanced automated inspection systems within our high-volume, high-mix heavy manufacturing facility.

In this role, you will be the subject matter expert for AI vision platforms, leveraging both 2D and 3D imaging to solve complex inspection challenges. You will work in a fast-paced environment where precision is critical, ensuring every component—from massive structural parts to small identification decals—meets our rigorous quality standards.

Key Responsibilities

• System Design & Integration: Architect, program, and deploy vision solutions utilizing AI-driven toolsets for complex defect detection.
• 2D & 3D Implementation: Configure 2D cameras for AI based analysis and 3D lasers for volumetric analysis and defect detection.
• Automated Inspection Tasks:
• Part Location: Develop robust "Search" and "Shape Trailing" logic to locate heavy components on high-volume lines.
• Decal & Placement Verification: Utilize AI learning to verify the presence, orientation, and correct application of decals and labels.
• Cosmetic Defect Detection: Train AI models to distinguish between acceptable surface variations and true cosmetic flaws (scratches, dents, or coating irregularities) on diverse materials.
• OCR/OCV: Implement high-reliability reading of metal-stamped or printed nameplates and VIN plates in challenging industrial lighting.
• Hardware Specification: Select appropriate lighting (backlights, ring lights, coaxial), lenses, and mounting bracketry to withstand heavy manufacturing environments.
• Continuous Improvement: Analyze inspection data to reduce "false rejects" and improve "overkill" rates using statistical analysis tools.

Required Qualifications

• Bachelors Degree: Mechanical Engineering, Electrical Engineering, Industrial Engineering, Computer Engineering, or Software Engineering
• Technical Expertise: Minimum 3–5 years of hands-on experience with Vision Systems
• 3D Vision: Proven experience with 3D laser profilers or area sensors for Z-axis measurement and inspection.
• 2D Vision: Proven experience utilizing 2D cameras to train AI learning models to detect defects.
• Manufacturing Background: Experience in a heavy manufacturing or automotive environment; comfortable working around large-scale automation and robotics.
• Problem Solving: Deep understanding of industrial optics, including the physics of light and how to filter out ambient interference in a factory setting.
• Communication: Ability to collaborate with PLC Engineers (Allen-Bradley) to integrate vision data into the broader automation cell.

Preferred Skills

• Experience with Zebra, Keyence, Cognex, or Sick Vision System technology for quality inspection.
• Knowledge of robotic guidance (linking vision systems to Fanuc, ABB, Yaskawa or Kuka arms).

Commercial and personal line insurance carriers rely on EXL as a key business partner through our Castle High Value and EXL Risk Control service offerings. We offer a variety of field inspections and risk control services to support our clients’ underwriting processes. EXL’s consultants deliver industry-leading professionalism, quality and turn-around time, and our innovative solutions help our clients keep ahead of the competition. Description

EXL Risk Control is looking for self-directed independent contractors who possess excellent

communication skills, computer proficiency, and a commitment to meeting client quality and

timeliness standards. You will work from your own home or office, and service onsite

survey/inspection assignments in the Columbus, MS area, and other locations within approximately 45 miles of Columbus.

Responsibilities

You will be responsible for scheduling on-site surveys and providing risk control reports to

insurance industry clients. These reports contain information necessary to underwrite a

commercial insurance policy and may include recommendations to control and/or correct

potential loss producing conditions associated with that policy. You will be expected to

manage assignments you accept, successfully secure customer appointments within a

local territory and complete work assignments on time.

Our Risk Control Inspectors evaluate businesses behind the scenes to identify hazards and

improve safety, mitigating risks for our insurance company clients. The type of businesses

we survey are commercial operations, including retail, restaurants, hotels, apartments,

construction jobsites, churches, schools, etc. Most surveys are focused on assessing the

business for Property and General Liability coverage, but we also service other commercial

insurance lines of business including Workers Compensation, Auto/Fleet, Products Liability,

Inland Marine and Builders Risk.

Qualifications

Preferred experience in commercial insurance, real estate, inspection, construction, claim,

loss control, underwriting, and/or fire and safety experience is a plus, but all interested

candidates are encouraged to submit their qualifications. In lieu of experience, we can refer

you to a 15-hour online certification option to qualify you. Fees are negotiable depending on

experience and the unique aspects of selected jobs.

Tools or Items You Must Provide:

• Digital camera or tablet
• Computer
• Printer
• High speed internet access
• Reliable vehicle
• Measuring device such as a laser, 100 ft. tape, or measuring wheel
• Auto and General Liability Insurance

All interested candidates are encouraged to apply.

• Greet and serve patrons in lounge, restaurant, or gaming areas in a friendly,
  
  

• Receive and understand beverage orders; relay drink orders to bartenders.
• Carry and balance full tray of beverages.
• Circulate throughout assigned work station on a continuous basis, greeting
  
  

• Compute charges for orders and accept payment for same; maintain an
  
  

• Provide complimentary beverages in accordance with company policy.
  
  

• Must be at least 21 years of age.
• Six (6) months of related experience preferred.
• Must have excellent customer service skills.
• Must be able to walk for duration of shift.
• Must be able to carry and balance trays weighing up to 10 pounds.
• Must be able to obtain/maintain any necessary licenses and/or
  
  

Job Title: Administrative Assistant

Location: Byhalia, MS

Duration: 04 months

Job Description:

• Admin experience is a must - can manage conference rooms, food orders, calendars, expense reports, etc
• Must be social, well communicated with leads, loves and understands Corporate culture
• Absolutely must know email - outlook, coupa, and powerpoint

We're Hiring | Associate Attorney – Probate Practice

Trusted Plan Lawyer (Brad Williams, Attorney at Law, PLLC) is a process-driven estate planning and probate firm based in Ridgeland, MS — and we're growing. If you want to run probate matters efficiently, build real client relationships, and be rewarded directly for your performance, this is your firm.

What You'll Do:

→ Field incoming calls from potential new clients and evaluate new matters

→ Manage probate administration matters from opening to close

→ Appear in chancery courts statewide (occasional travel required)

→ Work within proven systems designed for efficient, client-friendly delivery

→ Serve as a trusted point of contact for clients throughout the probate process

What We're Looking For:

→ Active Mississippi Bar license in good standing — must be licensed to practice law in the State of Mississippi (additional surrounding states is a plus)

→ At least 1 year of meaningful probate or chancery court experience — OR a strong clerkship with a chancery judge 

→ Strong familiarity with chancery court practice and procedure

→ Strong computer skills and comfortable with a mostly digital law practice using automation and AI.

→ Strong client communication skills — comfortable in person, on the phone, and in the courtroom

→ Ability to put clients at ease and project professionalism and competence

→ Organized, self-directed, and comfortable working within established systems

→ Someone who wants to be part of a close-knit, high-performing team for the long haul

Compensation & Benefits:

→ Base salary $70,000–$76,000 DOE

→ Uncapped performance bonus — defined, transparent, and tied directly to your results. An attorney who meets performance expectations should expect total compensation in the $100,000+ range 

→ Employer-paid health insurance

→ 401(k) with 50% employer match up to 6%

→ Hybrid work schedule — in-office and work-from-home flexibility

→ Flexible PTO

→ Bar dues & CLE paid by the firm

→ Malpractice coverage provided

→ Statewide travel with mileage reimbursement

Who We Are: We are a close-knit team that has worked together for years — some of us for decades. We work hard, we take care of our clients, and we take care of each other. We are looking for someone who wants to be part of that for the long term and will fit out culture. We are proud to be an inclusive, welcoming workplace where everyone is respected and valued. If that sounds like the kind of place you want to spend your career, we'd love to meet you.

To Apply: Send your resume and a brief note about your chancery and probate experience.

Trusted Plan Lawyer is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Company Description

We suggest you enter details here.

Role Description

The Washington Law Firm, PLLC is seeking a full-time Legal Administrative Assistant for an on-site position located in Southaven, MS. The Legal Administrative Assistant will be responsible for providing administrative support and ensuring the smooth operation of daily legal office functions. Duties include preparing legal documents, organizing case files, handling correspondence, maintaining schedules, and ensuring proper communication between attorneys, clients, and staff.

Qualifications

• Strong knowledge of Law and experience with Legal Document Preparation
• Excellent Communication skills for handling client interactions and internal coordination
• Proficient in Administrative Assistance and proven Organization Skills
• Ability to manage multiple tasks with attention to detail and meet deadlines
• Proficiency in office software such as Microsoft Office Suite and legal-specific tools
• Familiarity with legal terminology and procedures
• Previous experience in a legal or administrative role is preferred
• Associate or Bachelor’s degree in a related field is a plus
• A great team player who has attention to detail
• Skilled in client intake, calendaring,

• multi-line phone management (up to 25 calls/day), and comprehensive legal support in a small-firm environment.