Engineering Jobs in Andover Massachusetts

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Principal Product Engineer will learn the technical aspect of key product in the Andover, MA factory.  The Product Engineer will be product centric technical liaison, focused on driving collaboration across work centers and all disciplines to resolve technical issues, improve efficiencies and optimize overall product yield to ensure high-quality and cost-effective products and systems. You will utilize data analysis, CORE methodologies, and technical understanding to maximize overall product test yield, efficiency, and value.

What You Will Do

• Address major yield and technical issues highlighted by tech leads and factory operation managers.

• Perform data analysis and provide direction for overall product yield and performance improvement.

• Facilitate collaboration across manufacturing work centers and design engineering.

• Empower production test engineer to resolve complex failures through data driven troubleshooting technique.

• Establish technical understanding of the product architecture, subassemblies, and test requirement.

• Partner with test and design engineering team to develop sustaining solution to technical problems with root cause and corrective action identification.  

• Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment.

Qualifications You Must Have  

• Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and typically a minimum 8 years of relevant experience

• 4+ years in Production testing/troubleshooting

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Preferred majors: Electrical Engineering, Computer Science/Engineering Technology

• The ability to interpret and analyzer RF parametric data

• Experience with lean principles in a manufacturing environment

• Current DOD Secret Security Clearance

• Excellent communication skills (written and verbal) and presentation skills

• Good interpersonal skills to manage tasks that bridge operations, production control, engineering, supply chain, and customer relations

• Experience applying technical principles in the manufacturing life cycle

• Experience with Quality Systems and their application

• Shop Floor Management

• Strong engineering aptitude and analytical skills

• Technical problem solving

• Customer and company oriented and driven to meet or exceed expectations

• Ability to work cohesively in a team environment

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering, Integrated Systems Department is seeking a Systems Engineering Technical Lead for the NASAMS product line. This role requires strong technical expertise and engineering leadership skills to drive the design and development of world-class air and missile defense systems.

The Integrated Systems Department supports Raytheon by providing world-class weapon systems engineering. Domain expertise includes radar systems, effector systems, battle management, command and control, network design, battlespace integration, and interoperability for both domestic and international customers.

You will work alongside motivated engineers who are responsible for conducting systems engineering studies and trades; supporting system requirements definition and analysis; and contributing to algorithm development, integration, test, and evaluation.

What You Will Do

• Provide technical oversight and management for a variety of Systems Engineering efforts

• Concept and requirements development (including decomposition and flowdown) within a mature product-line

• Concept of Operations (CONOPS) development and design

• Algorithm optimization and development

• Multi-disciplinary development efforts across the kill-chain for an Air and Missile Defense System

• Collaboration with customer to bring new capabilities to the warfighter

• Functional analysis of real world and test data; trade studies to bring advanced features to fielded system

• Support and lead Internal and External Program and Design Reviews

• Collaborate with other IPT/CPT leads from the various functions and products

• Support and lead Internal Research and Development for future capability upgrades

• System integration and test support, including live fire test events

• Periods of travel up to 25% of time both domestically and internationally

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience

• Experience with Air Defense Systems in systems engineering roles supporting development or production

• Experience with managing budget, scope and/or earned value

Qualifications We Prefer

• Experience interfacing with external customers and industry partners

• Excellent communication skills, written and verbal, with a variety of audiences

• Self-motivated, passionate leader

• 5+ years of experience in Air Defense Systems, Systems Engineering production or development

• Existing DoD Security Clearance

• Knowledge of Air Defense systems (examples – Patriot and NASAMS Systems)

• Experience managing competing programmatic priorities

• Experience making challenging technical decisions

• Familiarity with the Raytheon Integrated Product Development System (IPDS) or equivalent

• Experience with Earned Value Management (EVM) (plus, experience with Raytheon execution of EVM)

• Advanced degree in EE, CE, Physics, Math, ME, Aerospace\

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Now Hiring: Quality Manager | Manufacturing (Greater Boston, MA)

We’re seeking a hands-on Quality Manager to lead Quality teams across multiple local sites in the Greater Boston area. This role is ideal for a quality leader who enjoys partnering with Operations, driving continuous improvement, and owning results in a regulated manufacturing environment.

What you’ll do:

• Lead Incoming, In‑Process, and Final Inspection teams
• Own MRB, nonconforming material control, and CAPA
• Drive root cause analysis and quality improvement initiatives
• Lead internal and external audits (ISO 9001)
• Build and present meaningful quality metrics
• Partner cross‑functionally to strengthen manufacturing performance

What we’re looking for:

• 8+ years in Quality and/or Operations within complex manufacturing
• Prior people leadership experience
• Strong ISO 9001 knowledge (auditor experience a plus)
• Experience with electro‑mechanical assemblies
• Clear communicator who can influence across teams

If you’re a Quality leader ready to make an impact, apply today

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Lead, Mechanical Engineering - Thermal Analyst

Job Code: 33517

Job Location: Wilmington, MA

Job Schedule: 9/80 (Every other Friday off!)

Relocation: Relocation assistance is available to qualified applicants

Job Description:

L3Harris has an opportunity for a highly skilled Thermal Analyst to join our talented engineering organization. The Thermal Analyst will be a technical leader across multidisciplinary teams of engineers to create the best overall system design including thermal design, analysis, and test of optical systems operating in harsh space and ground environments. The candidate will possess in-depth understanding of aerospace thermal engineering technology and payload architectures for spacecraft sub-systems and instruments. These talents are used to direct and oversee teams who specialize in conductive, convective, and radiative analyses, understanding of heat pipes, radiative heat transfer, and thermal control hardware design (thermal blankets, surface treatments, heater tapes, thermistors) and the interaction with optical structures in order to minimize optical errors, and achieve operational temperatures. The role requires utilizing state of the art custom software in conjunction with Thermal Desktop and Finite Element Analysis (FEA) packages and often mentor other Thermal Analysts in the use of such tools.

Essential Functions:

• System level thermal design & development, payload level integration and test, and risk mitigation for space-based environments
• Perform thermal design and analysis tasks on complex mechanical hardware including precision mechanisms, electro-mechanical devices, aerospace mechanism design, complex electronics packaging, supporting space-based deployable mechanisms, avionics, innovative thermal and ground based systems
• Create and analyze design concepts using thermal analysis software & FEA
• Defines and establishes the technical approach to meet assigned objective
• Directs, coordinates and provides assistance to engineering team in order to meet assigned objectives
• Program support also includes requirements derivation and verification, system architecture development, loads derivation, trade studies, design sensitivity/optimization studies, preliminary and final design analysis, generation of analysis documentation (including presentation materials, and deliverable data packages), and leading system test activities
• Organization of thermal design and analysis as an IPT lead; frequently interfacing directly with customer technical leads and management.
• Prepares reports, formal documentation and presentation materials summarizing analysis results and present results to both external and internal groups, including leadership and customers
• Participates in and present information for Preliminary Design reviews (PDR), Critical Design Reviews (CDR) and Technical Interchange Meetings (TIM)
• Interfaces with outside suppliers/customers and other engineering disciplines to drive designs to closure (Structural, Systems Engineering, Electrical, Manufacturing, Performance, Quality, Configuration Management)
• Presents design details at program reviews to customers and independent reviewers
• Development of thermal test plans to manufacture and test payload sensor systems
• Support new business opportunities
• Mentor junior level engineers

Qualifications:

• Bachelor's Degree in Mechanical Engineering or other related engineering or science degree and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience
• 7+ years of professional experience using thermal analysis tools such as Thermal Desktop (preferred), Sinda, Flotherm, Icepak, etc.
• 4+ years of providing technical leadership to a multi-disciplinary mechanical engineering team through system requirements, design, analysis, test, hardware build, delivery and launch
• Professional experience with thermal analysis of mechanical and electronic systems, in space, air or ground environments
• Professional experience with thermal vacuum testing
• Ability to obtain and maintain a U.S. TS/SCI Security Clearance

Preferred Additional Skills:

• Experience with finite element analysis software
• Able to support design decisions with well documented engineering analyses and calculations
• Able to analyze problems and to focus and drive down to the root cause of problems quickly
• Experience in leading engineering teams from conceptual through detailed design phases
• Experience as a lead engineer, project engineer, or IPT lead is a plus.
• Experience with Microsoft office tools (Word, Excel, PowerPoint, etc.)
• Active TS/SCI clearance

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $122,000.00 - $227,000.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Locations: Atlanta | Boston | Heredia

Who We Are

Boston Consulting Group partners with leaders in business and society to tackle their most important challenges and capture their greatest opportunities. BCG was the pioneer in business strategy when it was founded in 1963. Today, we help clients with total transformation-inspiring complex change, enabling organizations to grow, building competitive advantage, and driving bottom-line impact.

To succeed, organizations must blend digital and human capabilities. Our diverse, global teams bring deep industry and functional expertise and a range of perspectives to spark change. BCG delivers solutions through leading-edge management consulting along with technology and design, corporate and digital ventures—and business purpose. We work in a uniquely collaborative model across the firm and throughout all levels of the client organization, generating results that allow our clients to thrive.

What You'll Do

POSITION DESCRIPTION

We are seeking a motivated and experienced Technical Application Engineer to lead the engineering, administration, and optimization of personal productivity applications across BCG. This role plays a critical part in ensuring that BCG's suite of productivity tools—including Microsoft 365, Adobe Acrobat and Creative Cloud, and other integrated third-party applications—are implemented and operated at peak performance. As a key member of the Productivity Tools team within BCG’s Personal Productivity Organization, you will collaborate with product owners, vendors, and architects and engineering teams to ensure seamless user experiences, effective governance, and ongoing operational excellence.

Key Responsibilities:

• Engineering & Administration
• Manage and configure enterprise application services across both legacy and cloud platforms.
• Lead upgrades, rollouts, patching, and migrations for a variety of applications.
• Conduct health checks, monitoring, troubleshooting, and performance tuning.
• Integrate applications with third-party platforms or in-house solutions.
• Support complex deployments and ensure high availability of services.
• Governance, Documentation & Support
• Define and maintain SOPs, administrative practices, and end-user documentation.
• Develop governance frameworks around licensing, lifecycle, and architecture.
• Provide Tier 3 escalation support and resolve complex technical issues.
• Mentor service desk teams and promote best practices in application usage and management.
• Collaboration & Cross-Team Engagement
• Coordinate with network, security, and support teams for seamless application service delivery.
• Participate in planning, migrations, upgrades, and project execution.
• Liaise directly with Microsoft, Adobe and other vendors for advanced configuration and support scenarios.

Core Focus Areas:

• Deliver robust engineering and operational support for Microsoft 365 apps, add-ins, Adobe Acrobat, MS Forms, and other productivity tools.
• Drive standardization and operational consistency across the firm’s application portfolio.
• Provide leadership and guidance within the M365 Application Governance Council.
• Contribute to the strategy and implementation of productivity-enhancing tools firmwide.

What You'll Bring

Experience Required:

• 5+ years of experience managing enterprise-grade applications, with 3–5 years specifically in Microsoft 365 administration and technical product analysis.
• Proven experience in Adobe Creative Cloud deployment and productivity enablement.
• Strong background in enterprise M365 configuration and governance, including automation tools like Power Automate and scripting with PowerShell and Microsoft Graph API.
• Advanced capabilities using GraphAPI, PowerShell, SQL, and Power BI for:
• Scripting and bulk administration
• Automating service management
• Data analysis and backend reporting
• Visualizing application performance metrics
• Background in implementing GenAI capabilities across Microsoft 365 (e.g., Powerpoint, Word, Excel) is a significant plus.
• Familiarity with Azure AD, Conditional Access, Defender for Office 365, Intune, and related services.
• Expertise in managing applications in a cross platform environment such as Windows, Mac (OSX), and iOS platforms.
• Experience across application development life cycles, including requirements design, development tracking, change/release management, and operational support.
• Ability to identify and manage integration dependencies across M365 apps and third-party solutions.
• Strong incident management, security compliance, and vulnerability remediation experience.
• Track record in defining KPIs and reporting on performance and service stability.
• Level C2 English proficiency as demonstrated by IELTS 8.5+, TOEFL iBT 110+, TOEIC 945+, CAMBRIDGE CPE, or comparable demonstrated proficiency.
• B.S. CS/MIS or four (4) additional years relevant experience in lieu of degree

Preferred Qualifications:

• Certifications such as MS-100, MS-101, SC-300, AZ-900 are highly desirable.
• Agile/Scrum experience and familiarity with Jira, Confluence, or Azure DevOps.
• Prior involvement in enterprise-level security policy enforcement and tooling compliance.
• Strong communication skills with an ability to convey technical issues to non-technical stakeholders.
• Key Attributes for Success:
• Excellent organizational and time management skills.
• Proven ability to manage multiple priorities in a fast-paced environment.
• Proactive problem-solver with a collaborative mindset.
• Clear, confident communicator with strong documentation capabilities.

Additional info

*** For US locations only ***

In the US, we have a compensation transparency approach.

Total compensation for this role includes base salary, annual discretionary performance bonus, retirement contribution, and a market leading benefits package described below.

• The base salary range for this role in Atlanta is $121,000.00 - $147,700.00 

This is an estimated range, however, specific base salaries within the range depend on various factors such as experience and skill set. It is not common for new BCG employees to be hired at the high-end of the salary range. BCG regularly reviews its ranges to ensure market competitiveness.

In addition to your base salary, your total compensation will include a bonus of up to 16% and a generous retirement contribution that starts at 5% and moves to 10% after 2 years.

All of our plans provide best in class coverage:

• Zero dollar ($0) health insurance premiums for BCG employees, spouses, and children

• Low $10 (USD) copays for trips to the doctor, urgent care visits and prescriptions for generic drugs

• Dental coverage, including up to $5,000 in orthodontia benefits

• Vision insurance with coverage for both glasses and contact lenses annually

• Reimbursement for gym memberships and other fitness activities

• Fully vested Profit Sharing Retirement Fund contributions made annually, whether you contribute or not, plus the option for employees to make personal contributions to a 401(k) plan

• Paid Parental Leave and other family benefits such as elective egg freezing, surrogacy, and adoption reimbursement

• Generous paid time off including 12 holidays per year, an annual office closure between Christmas and New Years, and 15 vacation days per year (earned at 1.25 days per month)

• Paid sick time on an as needed basis

Boston Consulting Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity / expression, national origin, disability, protected veteran status, or any other characteristic protected under national, provincial, or local law, where applicable, and those with criminal histories will be considered in a manner consistent with applicable state and local laws.

BCG is an E - Verify Employer. Click here for more information on E-Verify.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Systems Engineering & Test Capabilities team discipline is seeking a Test Architect to support the NASAMS® surface to air defense system programs.  The Test Architect (TA) will be accountable for architecting a technically sound approach for the Test and Evaluation (T&E) strategy for the entire lifecycle of the product along with influencing the prime item architecture to support that strategy.
 

What You Will Do

• Responsible for test strategy for all aspects of the program and defines metrics to gauge progress.

• Responsible for defining or optimizing test environments and requirements to ensure on-time deliveries.

• Responsible for interface and coordination with internal and external organizations on test strategy, coordination, execution, and reporting activities.

• Extensive interaction with Program Managers, Directorate Leads, Chief Engineers, and technical subject matter experts (SMEs).

• Coordinate with other program disciplines to draw on their SMEs to address emergent issues across the systems, software, and hardware domains.

• Represent the interests of the Systems Integration and Test (SI&T) discipline on the program.

• Interface with the customer community on a regular basis to share test status, issues, and address programmatic concerns.

• Knowledge base for Model Based Systems Engineering and how to use this in Integration and Test for test strategy.

• International travel up to 20%, Regular travel between Raytheon locations in Massachusetts and Southern New Hampshire is required.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience

• Experience with formal system test activities, including ground tests, flight tests, system verification, and system integration check out events

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date with the ability to obtain a Final Secret U.S. government issued security clearance after start.

Qualifications We Prefer

• Excellent technical writing and formal presentation experience

• Strong proven communication skills

• Raytheon Test Architect Certification

• Experience with Department of War or similar major programs throughout the product lifecycle

• Active and transferable U.S. government issued security clearance is required prior to start date.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Welcome to Raytheon in Andover, MA

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Systems Engineering and Test Capabilities (SE&TC) is seeking a Section Leader for the System Integration and Test (SI&T) Integrated Systems Department. This department supports multiple programs including Patriot and NASAMS Systems.  As a Section Leader, the candidate will be expected to actively participate in Department level leadership team goals and initiatives, support department hiring and program staffing, provide employee feedback and mentoring, and be actively involved in daily program operations. This position provides an opportunity to grow your skillsets by contributing to the development of our workforce and creating and fostering a collaborative environment.

What You Will Do

• Lead a cross functional team of engineers

• Establish meaningful and measurable goals and communicate effectively with the team

• Oversee the direct line management activities for the section including communication, performance impact, career development, and talent acquisition

• Support department and discipline level initiatives

• Ensure employee compliance with company policies and procedures

• Oversight of personnel issue resolution

• Adhere to and ensure alignment to Raytheon Technologies Values and Behaviors

• Work as a technical lead or individual contributor; Section Leader duties account for approximately 10% of the employee’s time.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience

• Experience in system, software, and/or test.

Qualifications We Prefer

• Strong communication and interpersonal skills

• Experience with team leadership

• Experience with the Earned Value Management System (EVMS) or similar budget tracking system

• Experience with Raytheon’s Proposal Capture Process (development of Basis of Estimates, etc)

• Experience with the Estimate at Complete (EAC) process

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon is currently seeking a Test Equipment Design Engineer (Test Development Engineer II) to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures.  

You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing.

Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment.

This role is 100% onsite in Tewksbury, MA

What You Will Do

• Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital)

• Actively identify test readiness issues and optimizations throughout the development lifecycle.

• Understand and meet established project budget, schedule, and performance commitments

• Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers.

• Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision

• Engage in personal technical growth

• Prepare and clearly present your work product at project status meetings

• Support Manufacturing operations, including on-site troubleshooting and debugging

Qualifications You Must Have

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM)

• Minimum of two (2) years of relevant engineering experience

• Experience in electrical engineering design and/or software automation concepts and applications

• US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date.

Qualifications We Prefer

• Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts

• Experience with decision-making and problem-solving skills

• Experience working as a member of a team

• Experience with National Instruments’ TestStand, LabWindows/CVI, and/or LabVIEW

• Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design

• Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligibility

Learn More & Apply Now!

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Raytheon will sponsor clearance. Interim Secret Clearance required prior to start.

• This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information - part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

  The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

  Privacy Policy and Terms:

  Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Naval Power is seeking a highly motivated Production Integrated Product Team Lead (IPTL) for the SPY-6 Array production program's Array Build, Integration & Testing. This position reports to the SPY-6 Production Array Program Manager and leads the execution efforts of the recurring production sell-off. This lead will be responsible for ensuring that equipment delivery commitments are made on time and within budget, focusing on Array Build Integration & Testing, and RHS assembly builds, including Mechanical Structures & RMA Chassis material. They are responsible for removing barriers and defining solutions that support the Production IPT and program.

In addition, it is expected this person will work across all Raytheon functional organizations to staff the Production IPT and ensure the timely start-up and delivery of products in accordance with the contract(s).

This is an onsite position located at either our Andover or Tewksbury, MA facilities.

What You Will Do

• Establish and maintain a positive culture to which top talent is attracted.
• Provide leadership and direction for the cross-functional supply chain, operations, engineering, quality, test, and logistics teams in the Production IPT with an emphasis on mitigating technical risk, assuring continuous Array production and delivery of compliant hardware to the Navy.
• Collaborate with SPY-6 Chief Engineer to provide technical oversight of Array scope to include reviews of TDP changes, planning and execution of Array Production Test & FAIs.
• Lead MLAs/RFVs/MRBs for Array build and integration issues.
• Accountability for the production scope, including aligning product EACs with SOW definition, contract values and Program Management.
• Work with Customer counterparts to understand status, schedules, priorities and objectives for events.
• Participate in management of suppliers, in coordination with the supply chain function.
• Manage engineering staffing across the Production IPT.
• Developing presentations and presenting at program management reviews (PMRs), staffing reviews, and decision reviews to achieve contract commitments.
• Display strong communication, influence management, and presentation skills, and comfortably interact with both internal and external stakeholders at all levels of leadership.
• Support the program risk and opportunity process in accordance with specific financial goals and obligations.
• Travel to support supplier reviews and programmatic meetings.

What You Will Learn

• Raytheon and RTX Business Acumen.
• SBU & SSBU organizational structure, responsibilities amongst the programs and the functional areas, and deliverables.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience.
• Prior IPTL experience.
• Experience with financial management/analysis tools.
• Prior experience on a low-rate initial production (LRIP) or full rate production program, preferably in the aerospace and defense industry.
• Experience presenting to internal Raytheon leadership, customers, partners, and/or subcontractors.
• Active and transferable Secret U.S. government issued security clearance is required prior to start date with the ability to obtain special program access prior to start. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Prior IPT lead experience with heavy interaction with Operations and Supply chain function.
• Experience working with production of SPY-6 Systems.
• Master's Degree from an accredited university.
• Raytheon PM Certification Level 6 (or equivalent) or ability to obtain within a year.
• Demonstrated program execution experience managing program staffing, assignments and resources with cross-functional teams in an IPT organizational structure.
• Prior Functional leadership experience.
• Program execution experience under a firm fixed price contract structure.
• Demonstrated experience in leading a program or IPT over $50 million in annual sales.
• Experience working with Navy and/or International customers

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation
• Relocation Eligibility.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering and Test Capabilities (SE&TC) Discipline organization is the central focus for Mission Systems Integration activities within Raytheon, responsible for defining customer needs, functional and product architecture, requirements definition and decomposition, Model Based Systems Engineering (MBSE), system performance, System Security Engineering (SSE), integration and system level testing, identifying and resolving hardware, software, and networking issues, and developing automated or operator-driven tests in support of system-level integration, verification and validation.

Within SE&TC, Life Cycle Engineering (LCE) is responsible for ensuring our products are Safe, Reliable, Maintainable and delivered on time.  Life Cycle Engineering consists of multiple disciplines that support engineering, our program offices and our customers.  Our Life Cycle Engineering disciplines participate in the total life cycle of our products from conception to deactivation.  Our focus area is product support, including the following disciplines: Logistics, Technical Manuals, Training, Reliability, Maintainability, Supportability and Repair.

This position will be based in Tewksbury, MA.

This position is designated as ONSITE. Commuting costs to and from the Andover facility are the responsibility of the incumbent.

What You Will Do:

As an Control Account Manager, you’ll be assigned to one or more LTAMDS programs and will be responsible for providing innovative and trusted solutions that optimize the efficiency and effectiveness of the Land and Air Defense products and services over their life cycle. As a Deployment Fielding and Sustainment (DFS) CAM, the successful candidate will support the DFS program Leads, LTAMDS Program Control Account Managers, and Program leads in the successful completion of monthly Earned Value Management (EVM) inputs, reporting and analysis, monthly Budget Change Requests (BCRs), facilitate EAC and LRE inputs, and demonstrate the ability to perform meaningful analysis and effective communication to drive predictable results. Scope of work includes partnering with engineering and program leads for EVMS process inputs, EAC/LRE development, monthly variance reporting, and weekly analysis of cost and labor runs. The role focuses on driving cost control and schedule using APEX/SAP EV, IMS, and PMX management reporting tools. The candidate will be required to perform analyses and prepare reports to drive predictable cost and schedule. The ability to be self-sufficient as well as operating in a team environment, supporting both the Functional organizations, and ensuring program financial commitments are met and are fundamental to success in this role.

You’ll be responsible for the following responsibilities:

• Support the creation of Estimates at Complete (EACs) on a quarterly basis and

Latest Revised Estimates (LRE) on a monthly basis including estimate of costs, test of reasonableness analysis, and risk and opportunities assessment at the Program / Product / Mission area level.

• Perform detailed EV and financial analysis to budget baseline, schedule, and EAC positions.

• Prepare forecasts, monitor actual costs, and document variances to plans and forecasts

• Providing LCE inputs to proposals, supporting customer proposal negotiations, executing program start-up to include program Integrated Master Plan/Integrated Master Schedule and performance baseline development. Developing and partnering customer proposals, white papers, statements of work and Basis of Estimates

You will also be responsible for Control Account Management responsibilities:

• Integrated Master Plan/Integrated Master Schedule

• Estimate At Completion

• Program Baselining

• Manpower Allocation

• Proposal Support

• Tracking Books

Qualifications You Must Have:

• Typically requires a Bachelor’s and a minimum of 5 years prior relevant experience, or an Advance Degree in a related field and a minimum of 3 years’ experience

• Experience with Federal Acquisition Regulation (FAR), Defense Federal Acquisition

• Regulation Supplement (DFARS) and/or other Government Procurement regulations as they pertain to Bid/Cost proposals

• Experience using SAP, APEX, or similar system

• Experience with MS Office tools

• Ability to obtain and maintain U.S. government issued security clearance is required.  U.S. citizenship is required, as only U.S. citizens are eligible for the required security clearance.

Qualifications We Prefer:

• Knowledge in leading and managing the execution of processes, projects and tactics within one work area.

• Knowledge or skills leading or supporting the DFS or LCE disciplines.

• Experience using program management tools such as Earned Value Management System (EVMS) or similar tools

• Experience with Risk/Opportunity Management tools and processes

• Ability to lead, along with peers, the development of long range plans to capitalize on future opportunities

• Strong communication skills, verbal and written

• Demonstrated comprehensive planning skills with the ability to analyze technical and financial data and reports Exceptional judgement and decision-making

• Experience with Engineering PMER, SBT and Team Strength tools

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability and Innovation.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. 

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering & Test Capabilities team discipline is seeking a Senior Systems Engineer to support integration and test activities for NASAMS (surface to air defense system) programs. In this role you will collaborate internally across functions and externally with our industry partners and U.S. Government customers to plan, prepare and execute Product Acceptance Testing and System Demonstration of the NASAMS Fire Unit. This position reports into the overall NASAMS SI&T Cross Product Team Lead.

What You Will Do:

• Support the test architect in the integration and test strategy development and implementation to include metric collection and tracking.
• Support the development and review of test plans and test procedures.
• Support the planning, preparations, and conduct and product acceptance, system demonstration, and System Integration and Checkout (SICO) events.
• Identify and coordinate resources required for execution of demonstration and test events.
• Responsible for providing technical assistance to the program SI&T CPT lead to include development of technical briefings for program and engineering leadership.
• International travel up to 20%. Regular travel between Raytheon locations in Massachusetts and Southern New Hampshire is required.

Qualifications You Must Have:

• Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics. (STEM) and a minimum of 5 years of prior relevant experience.
• Experience with the systems, software, operation, integration, and/or test.
• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date with the ability to obtain a Final Secret U.S. government issued security clearance after start.

Qualifications We Prefer :

• Experience with DOORS
• Experience with the integration and test of Air Defense Systems
• Experience with creating test scripts, and/or conducting performance analysis.
• Experience with Microsoft applications.
• Effective written and verbal communication, customer focus, collaboration, and multitasking skills.
• Active and transferable U.S. government issued security clearance.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Welcome to Raytheon in Andover, MA

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Job Summary:

An exciting opportunity exists at Raytheon for a Semiconductor Dry Etch Engineering Lead to join our III-V compound semiconductor foundry team fabricating gallium nitride and gallium arsenide-based devices within the Advanced Microelectronics Solutions (AMS) Department.  This role requires a broad understanding of microelectronics processing and subject matter expertise in one or more dry etch related techniques including plasma ashing/descum, reactive ion etching (RIE), and inductively coupled etching (ICP).

As a member of the AMS Department, the individual in this role will serve as the dry etch processes lead engineer and collaborate with the various engineering work centers in the III-V semiconductor wafer foundry. The candidate will lead and assist projects in process sustainment, capital allocation, directing process and capital qualifications, improving cycle time, improving product yield, developing new data driven controls, and driving overall wafer movement efficiency.

The chosen candidate is expected to be an innovative and creative thinker capable of probing issues and reaching solutions both independently and in a team environment. The ideal candidate will have working knowledge of various microelectronics processing techniques beyond deposition, including wet and dry etching, lift-off techniques, photolithography, metrology, process characterization, foundry data integrity, and large data analysis methods.

The candidate is expected to work well in large and small, cross-functional teams, understand foundry processes, determine capacity limitations, improve overall equipment effectiveness, identify yield improvement opportunities, gather sponsorship and team resources, and execute on continuous improvement activities. Presence on the foundry floor is essential for quick resolution of technical issues as well as the ability to work with operations, facilities, equipment, and quality teams. The role requires a large degree of multitasking with attention to detail while managing priorities depending on the nature of the problems and the commitments.

This role will be 100% on-site and based in Andover, MA.

What You Will Do:

• Sustainment of current dry etch production processes and involvement with development of new process
• Set and report center priorities at the 8am foundry tier meeting
• Identify process improvement opportunities
• Lead 8Ds and RCCAs
• Create, document, maintain and approve work instructions
• Assist process engineers in training users and operators on semiconductor processes and equipment
• Manipulate large datasets and use statistical analysis to define SPC controls, manage projects, and assign risk
• Develop and report on actionable deposition work center health metrics
• Identify capital needs, collaborate with tool vendors, assist in tool acceptance, and create plans/schedules for tool and process qualifications
• Frequently work on the foundry floor and interact with various process engineering, equipment engineering, digital technologies, quality, facilities, and operation teams

Qualifications You Must Have:

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience in semiconductor processing techniques including photolithography, dielectric deposition, metals evaporation, and optical or scanning electron microscope inspections
• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer:

• Knowledge of dry etch tools, tool health monitoring, uniformity controls, SECS/GEM experience, and proficient in statistical process control
• Excellent communication skills to effectively transfer ideas
• Broad knowledge related to semiconductor processing, device physics, and data analysis
• Experience troubleshooting a wide range set of fabrication equipment in addition to establishing equipment qualification and preventative maintenance procedures
• Experience in a data analysis software packages (e.g. MATLAB, Python, SQL, JMP)
• Ability to lead and coordinate technical projects with cross-functional teams
• Experience with characterizing, understanding, and improving semiconductor device performance and reliability

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Raytheon's Land Air Defense Systems (LADS) Engineering Execution Department is seeking a skilled and motivated Cross Product Team Lead (CPTL) to support a large Patriot missile program. The CPTL is responsible for various engineering activities, including defining early integration in cooperation with the project development teams, directing CPT engineers, supporting the planning for requirements sell off, planning, execution, and analysis for system integration and verification, in hardware-in-the-loop facilities, ground and flight tests. Activities require the ability to support alternate shifts and/or extended hours and require travel. This position is onsite based in Andover, MA.

What You Will Do

• Responsible for cost, schedule and execution for Missile systems integration, verification and validation scope across a program.
• Lead a small team of engineers with planning and execution of integration and test activities for missile sub-assemblies.
• Working with systems engineers to define knowledge points ensuring risk burn-down throughout the development process.
• Mentor junior engineers with establishing methodical and disciplined processes for planning and execution of integration and test activities.
• Prepare documentation such as test plans, procedures, integration information sheets, test cases, and reports.
• Analyze data to identify and resolve system performance issues and complete requirement verification.
• Compile, summarize, and present data analysis to internal and external stakeholders, including program leadership and external customers.
• Collaborate across engineering functions to drive performance and resolve issues. Includes working closely with operations and manufacturing teams.
• Brief Program Management and USG customer on plans and status
• Travel as required to meet programmatic objectives. Regular travel between multiple Raytheon locations in Massachusetts is required. Occasional domestic and potential international travel.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience.
• Experience developing program baselines, managing cost, schedule and quality for technical projects.
• Experience leading/contributing to proposals, such as creating BOEs or contributing to leadership proposal reviews.
• Active and transferable U.S. government issued SECRET security clearance is required prior to start date. U.S. citizenship is required as only U.S. Citizens are eligible for a clearance.

Qualifications We Prefer

• Experience with system integration, verification and test of complex missile systems.
• Experience with planning and conducting integration and test events such as flight test missions.
• Earned Value Certification.
• Test Architect Certification.
• Ability to collaborate with other engineering disciplines, Quality, Reliability, and program management.
• Strong communication and leadership skills for coordinating across internal and external stakeholders.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility– Relocation assistance is available.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Locations: Raytheon Andover, MA Location
• We Are RTX

#LI-Onsite

#LI-HS30

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering and Test Capabilities (SE&TC) Surface Radars & Sensors Center is seeking a Chief Product Owner (CPO) to lead the overall vision, strategy, and coordination of the C5I business area operating within the organization's agile, multi-team environments. In this role, you will lead a team of product owners, align product goals with business strategy, and resolve dependencies, ensuring coordinated execution across the C5I programs scope.

What You Will Do

• Lead a matrixed engineering team, fostering collaboration across disciplines to meet program objectives and exceed customer expectations.
• Partner with the program leadership team to define and implement the "Definition of Done," ensuring quality and consistency throughout the product lifecycle.
• Serve as the primary interface with internal stakeholders, aligning technical execution with programmatic and business goals.
• Define, communicate, and implement the product vision and strategy to meet product line objectives.
• Oversee AGILE processes across SCRUM Teams, including Program Increment (PI) Planning, Scaled Daily Meetings, Tech Times, and Team Demos.
• Create and maintain a prioritized product backlog to ensure efficient execution of project goals.
• Support the program leadership team in providing innovative solutions to challenging problems for U.S. customers.
• Lead customer-facing demonstrations of the C5I system to potential new customers, contributing to the growth of the product line.
• This position is on site in Tewksbury, MA.

Qualifications You Must Have

• Typically requires Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience.
• Experience leading cross-functional teams and complex engineering projects.
• Experience working in an Agile environment and/or on Agile development projects.
• Experience in overseeing and/or monitoring technical cost and schedule performance.

Qualifications We Prefer

• Experience with software product development, networking, computing platforms, cybersecurity compliance (e.g., Link16, MIL-STD-6016).
• Six Sigma, CORE, Earned Value Management System (EVMS), Software Project Management Certification and/or PMX certification.
• Prior experience with the C5I product line or other DOD programs.
• Ability to understand command and control and/or radar technology in the areas of software design, integration and test.
• Proven experience in large, complex defense systems.
• Strong communication and leadership skills to effectively drive a shared vision across stakeholders and teams.
• Strategic thinking with a deep understanding of business and customer needs.
• Proven ability to resolve dependencies, mitigate risks, and deliver results in a fast-paced environment.
• Proven experience in large, complex defense systems.
• Experience with AI tools and applications to Systems Engineering.
• Experience with Model Based Systems Engineering (MBSE) and associated tools (i.e. Cameo).

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligibility– Relocation assistance available

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Job Summary:

The RF Microelectronics/Module Design & Foundry Services Department at Raytheon in Andover, MA, is currently seeking a Principal Electro-Mechanical Engineer to develop leading-edge miniaturized 3DHI sensors and systems to enable future generation technologies across Raytheon.

The successful candidate will be a highly motivated "self-starter" who will apply strong mechanical and electrical engineering skills to implement innovative solutions to challenging design criteria. They will be involved in research efforts including initial concepts, advanced technology demonstrations, and will have the opportunity to follow product development from beginning to end, including documentation, fabrication, assembly, and test/delivery of a range of microelectronics products. This position requires strong interpersonal, written, and verbal communication skills to maintain positive relationships & satisfaction with Program leadership (Engineering and Program Management). Knowledge of semiconductor manufacturing processes and materials and prior experience working with contract manufacturers (OSATs) is highly desired.

The role requires knowledge of high-density microelectronic packaging designs including Interposers, organic substrates, wafer and chip bumping and general knowledge in areas of electronic components/devices such as ASICs and FPGAs, design of electronic packaging chassis and structures, interconnects (connectors/cables), and thermal management design of high-density electronic systems and electronic enclosures. The successful candidate will have the ability to bring new and fresh ideas to the team, with opportunities to explore research and innovation areas in a collaborative and fun team environment. Additionally, the candidate is expected to follow established procedures in creation of technical data package work products, while working closely with program management and functional supervision to ensure the overall design objectives are met.

What You Will Do:

• Work with cross-functional hardware engineering teams to develop advanced microelectronics packages including 3DHI, 3D, and 2.5D (interposer + chiplets) and novel material and process solutions for RF, digital, mixed-signal, and photonics products
• Leverage industry-leading manufacturing and novel materials to achieve new levels of electro-mechanical performance and reliability

Qualifications You Must Have:

• Typically requires a Bachelor's Degree in a Science, Technology, Engineering & Math (STEM) Field and a minimum of Eight (8) or more years of relevant experience (An advanced STEM degree could count for 3 years of experience) with mechanical and electrical engineering design.
• Experience performing circuit layout design using 2D CAD tools
• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer:

• A Master's degree or PhD. in a Science, Technology, Engineering & Math (STEM) Field
• Experience in RF circuit design, including 3D EM simulation in HFSS or similar tools
• Circuit layout design experience using 2D and 3D CAD tools (Cadence Virtuoso and/or Allegro/APD+)
• Experience and familiarity with selection and oversight for semiconductor wafer processing and finishing (plating, bumping, dicing)
• Design experience with 3D and 2.5D packaging, complex CAD/EDA software design workflows, and RF/Thermal/Digital co-design
• Experience qualifying and implementing cutting edge materials, fabrication techniques, and understanding of relevant materials used in semiconductor manufacturing and packaging
• Strong background in development, documentation, fabrication, assembly, and test/delivery of military/defense and/or commercial state-of-the-art electronic products
• Experience with designing electronics for extreme environmental requirements and design constraints
• Proficiency with 3D Mechanical CAD modeling and analysis tools (e.g., Solidworks, Creo).
• Experience in Geometric Dimensioning and Tolerance analysis for drawings
• Current DoD Secret level security clearance
• Innovative attitude to apply towards research and development of new technologies
• Excellent interpersonal and multi-tasking skills
• Excellent written and verbal communication skills
• Ability to work independently and in a team environment, including as a leader of small teams

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms