Information Technology Jobs in Renton Washington

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

- - - - - - - - - - - -

Michelin North America, Inc. is hiring a Forklift Tire Technician for Solideal Onsite Service. Together with our numerous partners worldwide, we offer customized services to meet the maintenance requirements of forklift fleets, ensuring safe operations and maximized uptime.

Let us invest in your success as you invest in ours.

Mechanical experience is preferred, but expertise isn't required. We will provide training for any skills required.

Must be 21 years or older.

Hourly wage with excellent benefits like 401(k) matching, paid time off, dental, health and life insurance! Incentive bonus opportunities.

This position is for day shift (start times may vary), 8-hour shifts with overtime available after 40 hours.

As a Forklift Tire Technician, you will give input for customer service and operational improvement. You will continuously improve the knowledge of our products and services and assume full ownership of the position function, with understanding of the role in relation to the success of the Service Center.

Must be able to pass a urine drug screen and DOT physical as a condition of an offer of employment, subject to ADA and reasonable accommodation process. Must be able to pass background check at an appropriate stage consistent with state law as a condition of an offer of employment.

• In-house and onsite installation of forklift and other material handling tires using a hydraulic tire press.
• Dismount, mount tires, and service the customer product as specified by the customer order.
• Perform preventive maintenance and ensure cleanliness of all equipment including service vehicles.
• Report to the Service Manager immediately any material that does not meet quality standards, equipment that requires maintenance, delays at customer sites, potential issues with customer equipment before servicing, accidents or concerns about safety or other potential hazards.
• Job requires regular bending, crouching, squatting, and reaching movements, and standing for prolonged periods.

• A "high school diploma" or equivalent experience.
• A valid driver's license.
• A dedication to prioritize personal safety and the safety of others.
• Punctuality and effective time management skills.
• A strong attention to detail, initiative, and critical thinking.
• Ability to work independently.
• Ability to lift up to 75 pounds required, with lift-assist available IE; forklift, Lift table, Lift Gate etc.
• Effective communication with customers on a professional level.
• Knowledge of MS Office Suite (Word, Excel, etc.) software applications and ERP system are a plus, but not required.

• In a Tobacco-free environment, including alternatives (vaping).
• In a service vehicle exposed to various noises and hot/cold conditions at customer locations (indoor/outdoor).
• In an industrial environment

Competencies Target

• Attention to Detail 3
• Customer Service Relationship 2
• Decision Making 1
• Teamwork & Collaboration 1
• Product Knowledge 2
• Networking 1
• Comply with Applicable Safety & Environment requirements 1

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

• 
  
• Assists the department leadership with creation and publishing of departmental metrics, policies, and other guidelines.
  
• Administers division SharePoint sites and updates content for division users.
  
• Manages calendaring activities for the Director(s) and Managing Director(s), coordinating, scheduling requests from internal customers, including senior executives and vendors, as well as arranging meeting locations, equipment, and catering needs for on-site and/or off-site meetings.
  
• Manages new employee onboarding processes to ensure appropriate accommodations, badging, tools, and other resources are available to maximize the new employee experience and efficiency.
  
• Coordinates the Uniform needs for Stores personnel.
  
• Coordinates vendor invoice processing and coordination with AP to ensure prompt and timely payment of supplier invoices.
  
• Coordinates office supplies for assigned departments.
  
• Coordinates division and departmental recognition programs and assists with employee engagement activities.
  
• Performs other duties as assigned.
  

• 
  
• Be energetic/positive attitude and wanting to work.
  
• Proficiencies in Microsoft products especially excel, sales force, organizational skills, good communication skills verbal and written
  
• 3-5 Years of Experience
  

• 
  
• Provides a variety of administrative and staff support services to an organizational unit.
  
• Performs a variety of administrative and clerical duties, which may include word processing, organizing electronic and paper files, scheduling meetings, maintaining calendars, processing incoming mail, answering phones, maintaining reports and other pertinent data.
  
• May assist in budget preparation and control activities.
  
• May assist in preparation and control of records, statistics, and reports regarding operations, personnel changes, etc. May administers various programs, projects, and/or processes specific to the operating unit served.
  
• May serve as administrative liaison with others within and outside the company regarding administrative issues related to sales, purchasing, personnel, facilities, and operations.
  
• May train and assist other employees.
  
• Other duties as assigned.
  

• 
  
• Ability to read and comprehend instructions, correspondence, and memos.Able to write correspondence.
  
• Effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.
  
• Must have strong communication skills, both verbal and written.
  
• Can add, subtract, multiply and divide into all units of measure, using whole numbers, common fractions and decimals.
  
• Compute rate, ratio, and percent and to draw and interpret bar graphs.
  
• Apply common sense understanding to carry out instructions furnished in written, oral or diagram form.
  
• Deal with problems involving several discrete variables in standardized situations.
  
• Proficient in Microsoft products (Word, Excel, PowerPoint, Outlook, Access, and Project).
  
• Knowledge with tables, formatting, formulas, clipart/ graphics, presentations, macros, database development, project tracking, etc.
  
• Excellent word-processing skills (50 - 60 wpm) and business writing ability, plus accurate and precise proofreading skills.Strong organization, analytical, attention to detail and follow up skills.
  
• Must be able to work on multiple projects concurrently and capable of working with little direct supervision.
  
• Will communicate with all levels (Presidents, Senior Vice Presidents, Vice Presidents and Directors of all Client operating companies and staff levels).
  
• Profit plan preparation as required.
  
• Strong sense of urgency and work ethic.
  

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Tank Sealer to join our Joint and Installation team in Everett and Renton, Washington.

As an Integral Fuel Tank Sealer, you will be essential in maintaining the highest standards of quality and safety during the sealing and assembly processes. Utilizing detailed installation plans and specifications, you will prepare tank surfaces, load sealing equipment, and apply sealants and topcoats according to established guidelines. Conducting thorough inspections and shakedowns of work areas prior to tank closure will ensure that any damaged seals or components are repaired and that all systems are functioning correctly. You will also assist with pressure testing operations and perform functional tests on fuel vent systems to identify and address any leaks. Your attention to detail will be critical in determining the appropriate sealing compounds and methods for each task, ensuring compliance. Please note that this role involves working in tight spaces, including entering the wing through a 9.5”X17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the lead or supervisor and review relevant Installation Plans (IP) and Shop Order Instants (SOI) to determine the work area.

• Gather necessary sealants, solvents, cleaners, and wipers from the designated storage area.

• Install ventilation equipment as required to ensure proper airflow in the work cavity.

• Clean tank surfaces using appropriate solvents or detergents, ensuring they are wiped dry.

• Clean and adjust sealing equipment to ensure proper functionality.

• Load sealing guns and apply sealant and/or topcoat per BAC specifications, including fillet seals to system components and sealing heads and collars of fasteners.

• Perform a shake-down of work areas prior to tank closure to repair any damaged seals or components and prepare for inspection.

• Apply wing station identification numbers on tank doors using stencils and spray paint as required.

• Install fuel tank closure panels or access doors after all necessary steps are complete and accepted by quality assurance.

• Assist with pressure testing operations and perform functional tests on fuel vent systems and tank cavities to determine if leaks exist.

• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.

• Determine proper sealing compounds, sequence of work, and method of application to accomplish assignments.

• Apply aerodynamic seals to skin gaps on leading and trailing edge panels as required.

• Position tools for locating vortex generators and apply faying surface seals as needed.

• Maintain personal and tool certifications, ensuring compliance with operational standards, and contact supervisors for assistance when needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.  

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

• Ability to access/enter a wing fuel tank opening (approximately 9.5 inch x 17.7 inch)

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Respirator trained

• Completed 1+ year of aerospace training in high school or community and technology college

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility. 

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

This facility is seeking a Diagnostic Radiology Physician for locum tenens support as they look to fill a current need.

Details and requirements for this opportunity:

· Job Settings: Hospital

· Modalities: Emergency Department and inpatient plain film imaging, with computed tomography performed as needed.

· Shift/Schedule/Hours: 7:30 AM - 5:30 PM, 4 day work week, once week a month starting in June (flexible schedule)

· Dates Needed: (Flexible)

· Credentialing Timeframe: 60 - 120 days (Multi care takes 120 days)

· Certifications Required: Physician needs to have Basic Life Support, medical license and be board eligible or board certified.

AMN Healthcare is a digitally enabled workforce solutions partner focused on solving the biggest challenges affecting healthcare organizations today. We offer a single-partner approach to optimize labor sources, increase operating margins, and provide technologies to expand the reach of care.

Kitestring is a 25 year old start up in Northwest Arkansas. We provide technical expertise to various clients delivering innovations that improve how customers shop and the enterprise operates. At Kitestring Technical Services, our mission is to share our collective knowledge to positively impact our employees, clients, and communities. Our vision is to be the most trusted partner in technology consulting. We believe people enable technology and vice-versa which is why we are in the business of both. We persistently challenge the barriers to diversity, inclusion, and empathetic cooperation.

Our Core Values are Transparency, People Driven, Empowered, Quality focused and socially responsible. Our values direct our company in how we do business and enhance the lives of our employees. Do our values speak to you?

Role Overview

The System/Business Analyst will support the implementation and configuration of the Toshiba Elera platform across the organization. This role focuses on building and configuring system environments, working closely with business stakeholders, and ensuring the platform meets operational needs.

The analyst will play a key role in planning deployments, configuring environments, supporting pilot implementations, and translating business requirements into system configurations.

Key Responsibilities

• Support environment setup and configuration for the Elera platform.
• Assist with building and managing enterprise node environments across U.S. and Canada.
• Configure and maintain Admin UI settings.
• Work closely with business stakeholders to:
• Understand operational workflows
• Gather and translate requirements
• Align system capabilities with business needs
• Support planning and pilot implementations, including environment design and configuration.
• Participate in meetings with business teams to review system functionality and requirements.
• Help configure the system to support different operational models across locations.
• Provide ongoing system analysis and operational support during rollout phases.
• Candidates should be comfortable working through complex operational requirements and translating them into system setup/configurations.

Required Technical & Functional Skills

Candidates should have experience with:

• System or business analysis within enterprise platforms
• Environment configuration and system setup
• Admin console / Admin UI configuration
• Translating business requirements into system configurations
• Supporting pilot implementations
• Enterprise system environments
• Stakeholder collaboration and requirements gathering

Experience with retail systems, POS platforms, or enterprise deployment environments is highly desirable.

Experience Level

• Mid-level System or Business Analyst
• Strong hands-on system configuration experience preferred
• Experience working directly with business stakeholders

Work Location

This role requires on-site presence.

• Analysts must be hands-on and working in the office
• Close collaboration with internal teams and business stakeholders is expected.

Team Structure

• Currently 3 analysts on the team
• Candidates will be evaluated and potentially added to the existing analyst group.