Engineering Jobs in Ware Hampshire County Ma Flexible
166 positions found
Salary: $40
- $47 per hour A bit about us: The world’s leading provider of mechanical and electrical construction and facilities services, including planning, consulting, and operations and maintenance.
We offer a complete package of facilities services, including engineering, design, installation, repair and maintenance.
Why join us? Competitive salary and annual merit increase Overtime and On-Call paid time.
Benefits package Work-life balance Positive and collaborative work environment Assistance with Relocation Job Details Lead Operations/Maintenance Technician (on site) in Palmer, MA
- Must have refrigeration exp! What you will do: Lead Operations/Maintenance Technician (on site) for a large, sophisticated customer in the Marlborough, MA area.
1st shift hours are 7:00am-3:30pm M-F.
The primary responsibility of this position is to coordinate and provide various types of support for the onsite service technicians and assure that service calls and preventative maintenance are organized and performed safely and on time by scheduling with customer.
Will be coordinating preventive maintenance on all equipment, including and not limited to heating and ventilating, pumps, fans, sterilizers, cage washers, boilers, chillers and refrigeration equipment.
This position is suited to a well-rounded HVAC technician (5+ years preferred) who can operate independently, think on their feet, and take ownership of our client’s needs.
You must be focused on your customer, be confident in your abilities with strong communication skills.
1st shift hours are 7:00am-3:30pm M-F.
BMS or Automation experience is a plus but not required.
A Company vehicle, HVAC equipment, gas card, cell phone, I-Pad, uniforms, and all PPE will be provided.
Overtime is available.
Skills Must have valid driver's license.
Must have MASS Refrigeration License.
Must have HVAC experience and knowledge Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- R
- Technician
- Excellent Benefits, Growth, and $$$ opportunity!! This Jobot Consulting Job is hosted by: Alicia Blake Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $35
- $55 per hour A bit about us: Our client, an established facilities service, engineering, and design firm.
They perform installation, repair, and maintenance for Commercial, Industrial facility projects in Massechussets.
Why join us? Competitive salary and annual merit increase Overtime and On-Call paid time.
Company Vehicle Benefits package Work-life balance Positive and collaborative work environment Assistance with Relocation Job Details HVAC and Refrigeration license Traveling to sites in Financial, healthcare, technology, educational and industrial facilities.
Hours 7:00 am
- 3:30 pm shifts for mobile.
Hours 8:00 am
- 4: 30 pm shift for Onsite at Industrial facility.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
This Jobot Job is hosted by: Chandler Kane Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $70,000
- $80,000 per year A bit about us: We are a global innovation studio rooted in performance design and material science.
With a heritage of craftsmanship and a forward-looking mindset, we collaborate with creators, athletes, and brands to develop advanced solutions for movement, durability, and comfort.
Our network of creative labs and technical centers spans North America, Europe, and Asia, serving as hubs for experimentation, prototyping, and community engagement.
Whether in the wild or on the street, our mission is to elevate the experience of motion through purposeful design.
Why join us? Enjoy a rewarding compensation structure with comprehensive perks.
Join a fast-paced environment focused on innovation and continuous improvement in production.
Take on a pivotal position influencing quality and process evolution across the organization.
Collaborate with a forward-thinking team dedicated to driving operational success.
Job Details Job Details: We are looking for a dedicated and meticulous Quality Engineer to join our dynamic team.
You will be responsible for ensuring consistent quality of production by developing and enforcing good manufacturing practices, validating processes, and providing documentation.
The Quality Engineer will have a deep understanding of our products and processes and will play a key role in product development, from conceptualization to final delivery.
The ideal candidate will be a problem-solver with an analytical mind, a strong technical aptitude, and a passion for quality.
Responsibilities: Develop and implement quality control methodologies to ensure compliance with quality assurance standards, guidelines, and procedures in each product development phase.
Conduct root cause analysis, implement corrective action for process related concerns, and establish reporting systems for these actions.
Develop and initiate standards and methods for inspection, testing, and evaluation, utilizing knowledge in engineering fields such as chemical, electrical, or mechanical.
Plan, promote, and organize training activities related to product quality and reliability to ensure staff are well versed in quality control activities.
Analyze quality control test results and provide feedback and interpretation to production management or staff.
Interact with customers, suppliers, designers, and others to assist in resolving design, development, production, and acceptance issues.
Apply statistical process control (SPC) methods for analyzing data to evaluate the current process and process changes.
Drive continuous improvement through trend reporting analysis and metrics management.
Offer new ideas and suggestions for improvement, identify and implement new practices and processes that are “best in field.” Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively, making customer issues a priority.
Qualifications: Bachelor’s degree in Mechanical Engineering or a related field.
Minimum of 5 years of experience as a Quality Engineer, preferably in the manufacturing industry.
Proficient with 5 why, fishbone, DMAIC, Quality Control, Process Improvement, Six Sigma, ISO 9001, Mechanical Engineering, Product Development, Engineering Design, Lean Manufacturing, Quality Assurance, and Quality Management.
Strong computer skills including Microsoft Office Suite, especially Excel, and statistical analysis software.
Strong problem-solving skills, with a keen attention to detail, a strong sense of urgency, and the ability to communicate effectively in a cross-functional team.
Excellent knowledge of manufacturing processes, statistical quality control protocols, and a comprehensive understanding of industry and company standards.
Ability to multitask, prioritize, and manage time efficiently.
Excellent verbal and written communication skills.
Proven track record of managing and directing a highly skilled, motivated, successful, and results-oriented team.
Ability to clearly and effectively set goals, monitor work, and evaluate results to ensure objectives and operating requirements are met and are in line with the needs and mission of the organization.
In-depth understanding of the manufacturing industry and strong knowledge of regulatory and quality standards within the industry.
Certified Quality Engineer (CQE) certification is a plus.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Wichita, KS (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI28d909dffe6f-38
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Knoxville, TN (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PIc6dba56b523
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Roanoke, VA (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI80414dffc879-38
Remote working/work at home options are available for this role.
About CareSimple
CareSimple provides remote patient monitoring solutions that connect patients to their care teams through cellular-enabled devices, including blood pressure cuffs, glucometers, and pulse oximeters, that transmit real-time health data to clinicians. We partner with health systems across the country to support proactive management of acute and chronic conditions, helping patients stay safer at home and enabling providers to intervene earlier when it matters most. With deep Epic and Cerner integrations, a robust cellular-based device logistics network, and a data-driven escalation engine, we make RPM simple, scalable, and secure. We partner with leading health systems – CHUM, Henry Ford Health, UCSF, MetroHealth, and St. Elizabeth Healthcare – to deliver measurable ROI through CPT-coded reimbursement and population-health improvements. Our collaborative culture values rigor, clarity, and responsiveness, ensuring every customer feels supported and every challenge becomes an opportunity to innovate.
Role Overview
As a Patient Support Nurse at CareSimple, you will serve as a key liaison between our patients and clinical partners. You’ll build ongoing relationships with patients, conduct proactive outreach, monitor and respond to patient-generated health data alerts, and provide compassionate clinical guidance to help patients stay engaged and safe between provider visits. You’ll also guide patients through onboarding and device setup, address questions and concerns, and escalate clinical issues as needed. Utilizing our support ticket system, you will manage key logistics processes to ensure seamless delivery and support for remote monitoring devices, playing a critical role in the success of our RPM programs.
Responsibilities
- Patient Support & Care: Guide patients through initial onboarding and setup of their RPM devices with empathy and professionalism. Provide ongoing patient care touchpoints — answering clinical questions, offering health education, and supporting patient engagement and adherence throughout the monitoring program.
- Patient Alert Management: Monitor incoming patient health data alerts generated by RPM devices (e.g., out-of-range vitals, missed readings). Assess alert severity, apply clinical judgment to determine appropriate response, and take action following established protocols and clinical judgement, whether that’s direct patient outreach, care coordination, or escalation to the provider team.
- Technical Coordination: Provide basic troubleshooting for cellular-enabled devices and escalate issues via internal support tickets. Work cross-functionally to ensure timely resolution of technical concerns.
- Device Logistics Oversight: Coordinate device ordering and fulfillment, ensuring timely and accurate deliveries. Manage exceptions (e.g., reshipments, replacements, returns) and monitor the glucose supply auto-replenishment program. Track high-priority orders and proactively address risks to prevent delays.
- Documentation: Ensure clear and timely documentation across internal systems and, when applicable, in the customer’s EHR.
Qualifications
- Active RN or LPN license in a Nurse Licensure Compact (NLC) state
- Preferred: Fluent in Spanish and English (spoken and written)
- Preferred: Certified Diabetes Educator (CDE) or Certified Diabetes Care and Education Specialist (CDCES) certification
- 5+ years of clinical experience, preferably in telehealth, home health, or primary care
- Strong communication and interpersonal skills; comfortable working with seniors and underserved populations
- Technologically confident, with the ability to work across multiple platforms (EHR, ticketing, telehealth)
- Authorized to work in the United States without sponsorship
To Apply
Email with the subject “Patient Support Nurse – Remote”
Note on Resume Processing
We may use secure Large Language Models (LLMs) to assist with the review of resumes by analyzing skills, experience, and qualifications. Candidates who prefer not to have their application processed using AI may indicate this in their applicat
Remote working/work at home options are available for this role.
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Were expanding our engineering organization dramatically to meet exciting customer demand, and were actively looking for engineers who bring strong foundational skills and a passion for solving hard problems. Apply today and take the next step in your engineering career.
Raytheon is seeking a talented and motivated Systems Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting a range of programs. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment
Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. The Systems Engineering and Test Center (SETC) organization is currently hiring a Systems Engineer II to join our Tucson, AZ location. SETC is an exciting and challenging environment where you will have the opportunity to design, develop and test to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, chief engineers, chief technologists, the customer, and so many more to ensure we design, integrate, test and strengthen our systems to work the first time and every time for our warfighters!
In this role, you will have the opportunity to work on an effectors project pertinent to the systems lifecycle. This role is 100% on-site at our Tucson, AZ campus.
In this Systems Engineer role, you may support some of the following types of activities:
Core Systems Engineering: Develop system architecture and model using Model Based Systems Engineering. Conduct trade studies based on Concept of Operations. Perform Test Planning: Develop and implement test plans, procedures, integration, and verification documentation in both simulated and real-world environments and perform/execute the testing
Integrate Systems: Collaborate with multi-disciplinary team to integrate hardware and software into tactical systems, evaluating their functionality and impact. Perform Platform Integration, Flight Test, Qualification, Design Verification Execution
Identify and resolve hardware, software, and system issues through detailed data analysis and debugging.
Perform Data Analysis: Conduct statistical and numerical analysis test data to ensure optimal system performance and verify requirements.
Support Missions: Travel as needed to support mission execution at various locations including local RTX facilities, test sites, vendor facilities, and customer locations.
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 2 years of prior engineering experience.
Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date.
tactics, techniques, and procedures, as well as Department of Defense customer infrastructure experience.
Understanding of the Systems Engineering product lifecycle
Experience with performing performance analysis and presenting analytical and technical material
Experience with DOORS, Cameo, or other digital engineering tools.
Experience with model-based engineering and associated tools
Experience working in an integration lab, test facility, or in the field, supporting integration and/or verification.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – Relocation assistance is available
This includes all production and maintenance employees, as they are essential to the development of our products.
~ This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS) , an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
~ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. The Advanced Airborne RF Sensors department within the Space and Airborne Systems Engineering and Test Capability (SE&TC) Center is seeking a Systems Engineer to join our team in North Texas. As a Systems Engineer, you will play a critical role in the integration, testing, and verification of advanced hardware and software systems. You will ensure our products meet customer requirements and perform to expectations, from initial development through deployment and post-deployment support. This dynamic role offers the opportunity to collaborate across disciplines, solve complex challenges, and contribute to cutting-edge aerospace and defense technologies. Collaborate with hardware and software teams to develop test procedures and
Perform calibration and operation of phased array antennas within a laboratory test‑range environment.
Support testing, validation, and integration activities for phased array antenna systems, RF sensor, and EW systems.
Conduct modeling, simulation, and analysis to evaluate ES/EA system performance and inform design decisions.
Create and execute test plans and procedures, evaluate system functions and interfaces, and verify system requirements in preparation for final system sell-off to the customer.
Support production, system deployment, and post-deployment activities, ensuring product performance and reliability.
Collaborate across hardware and software disciplines to identify and implement solutions to complex system challenges.
Engage in Digital Transformation (DTx) efforts, leveraging methods and enabling technologies such as Model-Based Systems Engineering (MBSE) and Agile product development practices.
Work alongside teams of engineers to support integration and testing efforts, ensuring seamless functionality of system components.
Utilize laboratory equipment, including power supplies, oscilloscopes, and digital voltmeters.
Test event support activity may require travel which is not expected to exceed 20%.
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of EW/Radar systems design and requirements engineering experience.
Modeling and simulation for Electronic Warfare (EW) or radar systems.
Advanced degree in Science, Technology, Engineering or Mathematics (STEM preferred).
Model Based Systems Engineering (Cameo Enterprise Architecture (SysML specifically), digital thread concepts, digital engineering, MBSE with DevSecOps).
Matlab/Simulink, DOORS, DNG, Cameo, Jira, and Confluence.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. The Advanced Airborne RF Sensors department within the Space and Airborne Systems Engineering and Test Capability (SE&TC) Center is seeking a Systems Engineer to join our team in North Texas. As a Systems Engineer, you will play a critical role in the integration, testing, and verification of advanced hardware and software systems. You will ensure our products meet customer requirements and perform to expectations, from initial development through deployment and post-deployment support. This dynamic role offers the opportunity to collaborate across disciplines, solve complex challenges, and contribute to cutting-edge aerospace and defense technologies. Collaborate with hardware and software teams to develop test procedures and
Perform calibration and operation of phased array antennas within a laboratory test‑range environment.
Support testing, validation, and integration activities for phased array antenna systems, RF sensor, and EW systems.
Conduct modeling, simulation, and analysis to evaluate ES/EA system performance and inform design decisions.
Create and execute test plans and procedures, evaluate system functions and interfaces, and verify system requirements in preparation for final system sell-off to the customer.
Support production, system deployment, and post-deployment activities, ensuring product performance and reliability.
Collaborate across hardware and software disciplines to identify and implement solutions to complex system challenges.
Engage in Digital Transformation (DTx) efforts, leveraging methods and enabling technologies such as Model-Based Systems Engineering (MBSE) and Agile product development practices.
Work alongside teams of engineers to support integration and testing efforts, ensuring seamless functionality of system components.
Utilize laboratory equipment, including power supplies, oscilloscopes, and digital voltmeters.
Test event support activity may require travel which is not expected to exceed 20%.
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of EW/Radar systems design and requirements engineering experience.
Modeling and simulation for Electronic Warfare (EW) or radar systems.
Advanced degree in Science, Technology, Engineering or Mathematics (STEM preferred).
Model Based Systems Engineering (Cameo Enterprise Architecture (SysML specifically), digital thread concepts, digital engineering, MBSE with DevSecOps).
Matlab/Simulink, DOORS, DNG, Cameo, Jira, and Confluence.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
