Engineering Jobs in Troy New York Flexible
192 positions found
POSITION PURPOSE
Assists Clinical Engineering Manager in planning, developing, and implementing the medical equipment management program utilizing an equipment life cycle approach. Coordinates planned and corrective maintenance of diagnostic and therapeutic medical equipment used throughout the hospital. Ensures continuous improvement in quality, operational cost effectiveness, customer satisfaction and resource utilization. Supports and fosters team building within the local and corporate clinical engineering team. As needed, provides Planned Maintenance (PM) safety testing, repairs, calibration, installation, routine and emergency service, to general and various specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
1. Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
2. Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards. Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.
3. Completes corrective and planned maintenance work order documentation.
4. Analyzes and prepares reports on program effectiveness and operating cost.
5. Assists in implementing the medical equipment management program utilizing an equipment life cycle approach. Meets target objectives and standards for program timeliness and quality.
6. Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member and leader.
7. Performs PM procedures on multiple types of general and specialized clinical equipment.
8. Monitors CE Department PM completion rates during each monthly scheduled cycle and reports results to Clinical Engineering Manager.
9. Performs corrective maintenance procedures including diagnosing problems using, thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and document results of activities performed to comply with all regulatory and standard requirements.
10. Performs PM procedures using manufactures' recommendations, standards or code requirements, as well as industry acceptable processes and guidelines.
11. Notifies equipment users and CE Manager of repair status or delays as necessary.
12. Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to the hospital departments.
13. Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
14. Participates in various hospital committees as assigned, such as laser safety, risk management, and safety/EOC committees as assigned by CE Manager.
15. Continually improves processes by seeking ways to eliminate and reduce waste.
16. Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommend test equipment and spare equipment parts to the CE Manager.
17. Provide on-call service coverage after normal business hours on a rotating basis as assigned.
18. Provide assistance and training to all Bio-Medical Equipment Techs as assigned.
19. Functions as Clinical Engineering representative in the absence of the CE Manager.
20. Performs other duties as assigned or requested by CE Manager.
MINIMUM QUALIFICATIONS
1. Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required. CBET, CLET, or CRES certification preferred.
2. Five or more years experience or equivalent performing corrective and planned maintenance on medical devices and/or clinical support equipment.
3. Must have a basic understanding of anatomy, physiology, and medical terminology.
4. Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of test equipment.
5. Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repairs.
6. Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
7. Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
8. Must have basic understanding of personal computer operation, applications and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
9. Strong customer service and communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.
10. Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
11. Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
1. Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
2. Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
3. Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
4. Must be able to hear speech, distinguish sounds, and speak.
5. Must have near vision, far vision, depth perception, and be able to distinguish colors.
6. Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
7. Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
8. Must be able to push or pull over 100 pounds frequently (20% of the time).
9. Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
10. Must be able to adapt to frequently changing work priorities.
11. Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Compensation:
Pay Range: $36.34-54.51 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
POSITION PURPOSE
Assists Clinical Engineering Manager in planning, developing, and implementing the medical equipment management program utilizing an equipment life cycle approach. Coordinates planned and corrective maintenance of diagnostic and therapeutic medical equipment used throughout the hospital. Ensures continuous improvement in quality, operational cost effectiveness, customer satisfaction and resource utilization. Supports and fosters team building within the local and corporate clinical engineering team. As needed, provides Planned Maintenance (PM) safety testing, repairs, calibration, installation, routine and emergency service, to general and various specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
1. Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
2. Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards. Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.
3. Completes corrective and planned maintenance work order documentation.
4. Analyzes and prepares reports on program effectiveness and operating cost.
5. Assists in implementing the medical equipment management program utilizing an equipment life cycle approach. Meets target objectives and standards for program timeliness and quality.
6. Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member and leader.
7. Performs PM procedures on multiple types of general and specialized clinical equipment.
8. Monitors CE Department PM completion rates during each monthly scheduled cycle and reports results to Clinical Engineering Manager.
9. Performs corrective maintenance procedures including diagnosing problems using, thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and document results of activities performed to comply with all regulatory and standard requirements.
10. Performs PM procedures using manufactures' recommendations, standards or code requirements, as well as industry acceptable processes and guidelines.
11. Notifies equipment users and CE Manager of repair status or delays as necessary.
12. Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to the hospital departments.
13. Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
14. Participates in various hospital committees as assigned, such as laser safety, risk management, and safety/EOC committees as assigned by CE Manager.
15. Continually improves processes by seeking ways to eliminate and reduce waste.
16. Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommend test equipment and spare equipment parts to the CE Manager.
17. Provide on-call service coverage after normal business hours on a rotating basis as assigned.
18. Provide assistance and training to all Bio-Medical Equipment Techs as assigned.
19. Functions as Clinical Engineering representative in the absence of the CE Manager.
20. Performs other duties as assigned or requested by CE Manager.
MINIMUM QUALIFICATIONS
1. Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required. CBET, CLET, or CRES certification preferred.
2. Five or more years experience or equivalent performing corrective and planned maintenance on medical devices and/or clinical support equipment.
3. Must have a basic understanding of anatomy, physiology, and medical terminology.
4. Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of test equipment.
5. Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repairs.
6. Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
7. Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
8. Must have basic understanding of personal computer operation, applications and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
9. Strong customer service and communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.
10. Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
11. Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
1. Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
2. Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
3. Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
4. Must be able to hear speech, distinguish sounds, and speak.
5. Must have near vision, far vision, depth perception, and be able to distinguish colors.
6. Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
7. Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
8. Must be able to push or pull over 100 pounds frequently (20% of the time).
9. Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
10. Must be able to adapt to frequently changing work priorities.
11. Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Compensation:
Pay Range: $36.34-54.51 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
POSITION PURPOSE
Assists Clinical Engineering Manager in planning, developing, and implementing the medical equipment management program utilizing an equipment life cycle approach. Coordinates planned and corrective maintenance of diagnostic and therapeutic medical equipment used throughout the hospital. Ensures continuous improvement in quality, operational cost effectiveness, customer satisfaction and resource utilization. Supports and fosters team building within the local and corporate clinical engineering team. As needed, provides Planned Maintenance (PM) safety testing, repairs, calibration, installation, routine and emergency service, to general and various specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
1. Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
2. Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards. Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.
3. Completes corrective and planned maintenance work order documentation.
4. Analyzes and prepares reports on program effectiveness and operating cost.
5. Assists in implementing the medical equipment management program utilizing an equipment life cycle approach. Meets target objectives and standards for program timeliness and quality.
6. Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member and leader.
7. Performs PM procedures on multiple types of general and specialized clinical equipment.
8. Monitors CE Department PM completion rates during each monthly scheduled cycle and reports results to Clinical Engineering Manager.
9. Performs corrective maintenance procedures including diagnosing problems using, thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and document results of activities performed to comply with all regulatory and standard requirements.
10. Performs PM procedures using manufactures' recommendations, standards or code requirements, as well as industry acceptable processes and guidelines.
11. Notifies equipment users and CE Manager of repair status or delays as necessary.
12. Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to the hospital departments.
13. Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
14. Participates in various hospital committees as assigned, such as laser safety, risk management, and safety/EOC committees as assigned by CE Manager.
15. Continually improves processes by seeking ways to eliminate and reduce waste.
16. Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommend test equipment and spare equipment parts to the CE Manager.
17. Provide on-call service coverage after normal business hours on a rotating basis as assigned.
18. Provide assistance and training to all Bio-Medical Equipment Techs as assigned.
19. Functions as Clinical Engineering representative in the absence of the CE Manager.
20. Performs other duties as assigned or requested by CE Manager.
MINIMUM QUALIFICATIONS
1. Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required. CBET, CLET, or CRES certification preferred.
2. Five or more years experience or equivalent performing corrective and planned maintenance on medical devices and/or clinical support equipment.
3. Must have a basic understanding of anatomy, physiology, and medical terminology.
4. Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of test equipment.
5. Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repairs.
6. Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
7. Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
8. Must have basic understanding of personal computer operation, applications and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
9. Strong customer service and communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.
10. Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
11. Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
1. Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
2. Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
3. Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
4. Must be able to hear speech, distinguish sounds, and speak.
5. Must have near vision, far vision, depth perception, and be able to distinguish colors.
6. Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
7. Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
8. Must be able to push or pull over 100 pounds frequently (20% of the time).
9. Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
10. Must be able to adapt to frequently changing work priorities.
11. Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Compensation:
Pay Range: $36.34-54.51 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
POSITION PURPOSE
Assists Clinical Engineering Manager in planning, developing, and implementing the medical equipment management program utilizing an equipment life cycle approach. Coordinates planned and corrective maintenance of diagnostic and therapeutic medical equipment used throughout the hospital. Ensures continuous improvement in quality, operational cost effectiveness, customer satisfaction and resource utilization. Supports and fosters team building within the local and corporate clinical engineering team. As needed, provides Planned Maintenance (PM) safety testing, repairs, calibration, installation, routine and emergency service, to general and various specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
1. Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
2. Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards. Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.
3. Completes corrective and planned maintenance work order documentation.
4. Analyzes and prepares reports on program effectiveness and operating cost.
5. Assists in implementing the medical equipment management program utilizing an equipment life cycle approach. Meets target objectives and standards for program timeliness and quality.
6. Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member and leader.
7. Performs PM procedures on multiple types of general and specialized clinical equipment.
8. Monitors CE Department PM completion rates during each monthly scheduled cycle and reports results to Clinical Engineering Manager.
9. Performs corrective maintenance procedures including diagnosing problems using, thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and document results of activities performed to comply with all regulatory and standard requirements.
10. Performs PM procedures using manufactures' recommendations, standards or code requirements, as well as industry acceptable processes and guidelines.
11. Notifies equipment users and CE Manager of repair status or delays as necessary.
12. Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to the hospital departments.
13. Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
14. Participates in various hospital committees as assigned, such as laser safety, risk management, and safety/EOC committees as assigned by CE Manager.
15. Continually improves processes by seeking ways to eliminate and reduce waste.
16. Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommend test equipment and spare equipment parts to the CE Manager.
17. Provide on-call service coverage after normal business hours on a rotating basis as assigned.
18. Provide assistance and training to all Bio-Medical Equipment Techs as assigned.
19. Functions as Clinical Engineering representative in the absence of the CE Manager.
20. Performs other duties as assigned or requested by CE Manager.
MINIMUM QUALIFICATIONS
1. Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required. CBET, CLET, or CRES certification preferred.
2. Five or more years experience or equivalent performing corrective and planned maintenance on medical devices and/or clinical support equipment.
3. Must have a basic understanding of anatomy, physiology, and medical terminology.
4. Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of test equipment.
5. Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repairs.
6. Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
7. Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
8. Must have basic understanding of personal computer operation, applications and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
9. Strong customer service and communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.
10. Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
11. Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
1. Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
2. Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
3. Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
4. Must be able to hear speech, distinguish sounds, and speak.
5. Must have near vision, far vision, depth perception, and be able to distinguish colors.
6. Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
7. Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
8. Must be able to push or pull over 100 pounds frequently (20% of the time).
9. Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
10. Must be able to adapt to frequently changing work priorities.
11. Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Compensation:
Pay Range: $36.34-54.51 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONSKnows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment.
Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas: CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of all radiological and general medical equipment.Recommend radiology related test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances. Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I, IIand Senior Biomed as assigned.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc. Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.
Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition. Follow complex written instructions, perform tasks and document actions taken to restore service.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Ability to mentally concentrate while being subject to interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Were expanding our engineering organization dramatically to meet exciting customer demand, and were actively looking for engineers who bring strong foundational skills and a passion for solving hard problems. Apply today and take the next step in your engineering career.
Raytheon is seeking a talented and motivated Systems Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting a range of programs. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment
Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. The Systems Engineering and Test Center (SETC) organization is currently hiring a Systems Engineer II to join our Tucson, AZ location. SETC is an exciting and challenging environment where you will have the opportunity to design, develop and test to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, chief engineers, chief technologists, the customer, and so many more to ensure we design, integrate, test and strengthen our systems to work the first time and every time for our warfighters!
In this role, you will have the opportunity to work on an effectors project pertinent to the systems lifecycle. This role is 100% on-site at our Tucson, AZ campus.
In this Systems Engineer role, you may support some of the following types of activities:
Core Systems Engineering: Develop system architecture and model using Model Based Systems Engineering. Conduct trade studies based on Concept of Operations. Perform Test Planning: Develop and implement test plans, procedures, integration, and verification documentation in both simulated and real-world environments and perform/execute the testing
Integrate Systems: Collaborate with multi-disciplinary team to integrate hardware and software into tactical systems, evaluating their functionality and impact. Perform Platform Integration, Flight Test, Qualification, Design Verification Execution
Identify and resolve hardware, software, and system issues through detailed data analysis and debugging.
Perform Data Analysis: Conduct statistical and numerical analysis test data to ensure optimal system performance and verify requirements.
Support Missions: Travel as needed to support mission execution at various locations including local RTX facilities, test sites, vendor facilities, and customer locations.
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 2 years of prior engineering experience.
Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date.
tactics, techniques, and procedures, as well as Department of Defense customer infrastructure experience.
Understanding of the Systems Engineering product lifecycle
Experience with performing performance analysis and presenting analytical and technical material
Experience with DOORS, Cameo, or other digital engineering tools.
Experience with model-based engineering and associated tools
Experience working in an integration lab, test facility, or in the field, supporting integration and/or verification.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – Relocation assistance is available
This includes all production and maintenance employees, as they are essential to the development of our products.
~ This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS) , an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
~ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. The Advanced Airborne RF Sensors department within the Space and Airborne Systems Engineering and Test Capability (SE&TC) Center is seeking a Systems Engineer to join our team in North Texas. As a Systems Engineer, you will play a critical role in the integration, testing, and verification of advanced hardware and software systems. You will ensure our products meet customer requirements and perform to expectations, from initial development through deployment and post-deployment support. This dynamic role offers the opportunity to collaborate across disciplines, solve complex challenges, and contribute to cutting-edge aerospace and defense technologies. Collaborate with hardware and software teams to develop test procedures and
Perform calibration and operation of phased array antennas within a laboratory test‑range environment.
Support testing, validation, and integration activities for phased array antenna systems, RF sensor, and EW systems.
Conduct modeling, simulation, and analysis to evaluate ES/EA system performance and inform design decisions.
Create and execute test plans and procedures, evaluate system functions and interfaces, and verify system requirements in preparation for final system sell-off to the customer.
Support production, system deployment, and post-deployment activities, ensuring product performance and reliability.
Collaborate across hardware and software disciplines to identify and implement solutions to complex system challenges.
Engage in Digital Transformation (DTx) efforts, leveraging methods and enabling technologies such as Model-Based Systems Engineering (MBSE) and Agile product development practices.
Work alongside teams of engineers to support integration and testing efforts, ensuring seamless functionality of system components.
Utilize laboratory equipment, including power supplies, oscilloscopes, and digital voltmeters.
Test event support activity may require travel which is not expected to exceed 20%.
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of EW/Radar systems design and requirements engineering experience.
Modeling and simulation for Electronic Warfare (EW) or radar systems.
Advanced degree in Science, Technology, Engineering or Mathematics (STEM preferred).
Model Based Systems Engineering (Cameo Enterprise Architecture (SysML specifically), digital thread concepts, digital engineering, MBSE with DevSecOps).
Matlab/Simulink, DOORS, DNG, Cameo, Jira, and Confluence.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. The Advanced Airborne RF Sensors department within the Space and Airborne Systems Engineering and Test Capability (SE&TC) Center is seeking a Systems Engineer to join our team in North Texas. As a Systems Engineer, you will play a critical role in the integration, testing, and verification of advanced hardware and software systems. You will ensure our products meet customer requirements and perform to expectations, from initial development through deployment and post-deployment support. This dynamic role offers the opportunity to collaborate across disciplines, solve complex challenges, and contribute to cutting-edge aerospace and defense technologies. Collaborate with hardware and software teams to develop test procedures and
Perform calibration and operation of phased array antennas within a laboratory test‑range environment.
Support testing, validation, and integration activities for phased array antenna systems, RF sensor, and EW systems.
Conduct modeling, simulation, and analysis to evaluate ES/EA system performance and inform design decisions.
Create and execute test plans and procedures, evaluate system functions and interfaces, and verify system requirements in preparation for final system sell-off to the customer.
Support production, system deployment, and post-deployment activities, ensuring product performance and reliability.
Collaborate across hardware and software disciplines to identify and implement solutions to complex system challenges.
Engage in Digital Transformation (DTx) efforts, leveraging methods and enabling technologies such as Model-Based Systems Engineering (MBSE) and Agile product development practices.
Work alongside teams of engineers to support integration and testing efforts, ensuring seamless functionality of system components.
Utilize laboratory equipment, including power supplies, oscilloscopes, and digital voltmeters.
Test event support activity may require travel which is not expected to exceed 20%.
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of EW/Radar systems design and requirements engineering experience.
Modeling and simulation for Electronic Warfare (EW) or radar systems.
Advanced degree in Science, Technology, Engineering or Mathematics (STEM preferred).
Model Based Systems Engineering (Cameo Enterprise Architecture (SysML specifically), digital thread concepts, digital engineering, MBSE with DevSecOps).
Matlab/Simulink, DOORS, DNG, Cameo, Jira, and Confluence.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Location Details: United States - Remote
At GoDaddy the future of work looks different for each team. Some teams work in the office full-events or offsites. This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or offsites.
This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.
GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.
Join our team
Do you want to be an Information Security Leader at GoDaddy? GoDaddy's Product Security group is looking for a Principal Security Engineer to join our organization. Can you solve large scale and cross-company issues, while ensuring that partnership with the development and operational communities remains in front of mind?
GoDaddy is looking for a Principal Security Engineer to apply their hands-on technical skills, strong leadership abilities, and an eagerness to design solutions to complex problems. You must be comfortable with communicating to stakeholders, performing security assessments and prioritizing security risks, creating/presenting high-quality deliverables.
What you'll get to do...
- Identify security threats in applications and infrastructure and provide remediation mentorship to system owners.
- Join forces with SRE and development teams to find new and creative ways to reduce the occurrence of vulnerabilities at scale.
- Build repeatable/reusable security processes and frameworks.
- Review quality issues and work towards detecting security flaws both obvious and discrete.
- Assist with scoping prospective projects, participating in projects from kickoff through "definition of done" via end-to-end ownership.
- Use your industry experience to own and drive resolution and retest complex security events, policy questions and technical security risks.
Your experience should include...
- 7+ years of progressive security engineering experience across Security Architecture, Cryptography, Network, Cloud, Mobile, and Web Security.
- Skilled in Secure Development Lifecycle, Security by Design, and Shift Left methodologies.
- Proficient in Threat Modeling, Architecture Review, Penetration Testing, Code Review, SAST, and DAST.
- Strong scripting abilities in languages such as Python, C, C++, Java, Ruby, and PowerShell.
- Adept at applying security best practices for compliance, with excellent problem-solving and communication skills.
You might also have...
- Bachelor's degree in computer science or related field.
- Master's degree or PhD in Computer Science or related field.
- Hosting industry and/or cloud Experience.
- Experience in hardware security.
We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.
We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way.
About us... GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us.
At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.
GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.
Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to
Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.
GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.
Remote working/work at home options are available for this role.
Location Details: United States - Remote
At GoDaddy the future of work looks different for each team. Some teams work in the office full-events or offsites. This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or offsites.
This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.
GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.
Join our team
Do you want to be an Information Security Leader at GoDaddy? GoDaddy's Product Security group is looking for a Principal Security Engineer to join our organization. Can you solve large scale and cross-company issues, while ensuring that partnership with the development and operational communities remains in front of mind?
GoDaddy is looking for a Principal Security Engineer to apply their hands-on technical skills, strong leadership abilities, and an eagerness to design solutions to complex problems. You must be comfortable with communicating to stakeholders, performing security assessments and prioritizing security risks, creating/presenting high-quality deliverables.
What you'll get to do...
- Identify security threats in applications and infrastructure and provide remediation mentorship to system owners.
- Join forces with SRE and development teams to find new and creative ways to reduce the occurrence of vulnerabilities at scale.
- Build repeatable/reusable security processes and frameworks.
- Review quality issues and work towards detecting security flaws both obvious and discrete.
- Assist with scoping prospective projects, participating in projects from kickoff through "definition of done" via end-to-end ownership.
- Use your industry experience to own and drive resolution and retest complex security events, policy questions and technical security risks.
Your experience should include...
- 7+ years of progressive security engineering experience across Security Architecture, Cryptography, Network, Cloud, Mobile, and Web Security.
- Skilled in Secure Development Lifecycle, Security by Design, and Shift Left methodologies.
- Proficient in Threat Modeling, Architecture Review, Penetration Testing, Code Review, SAST, and DAST.
- Strong scripting abilities in languages such as Python, C, C++, Java, Ruby, and PowerShell.
- Adept at applying security best practices for compliance, with excellent problem-solving and communication skills.
You might also have...
- Bachelor's degree in computer science or related field.
- Master's degree or PhD in Computer Science or related field.
- Hosting industry and/or cloud Experience.
- Experience in hardware security.
We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.
We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way.
About us... GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us.
At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.
GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.
Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to
Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.
GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.
Remote working/work at home options are available for this role.
