Engineering Jobs in Summit Station Ohio

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Position: Senior Project Manager

Location: New Albany, OH 43054 – Fully Onsite

Schedule: M-F 8-5pm

Contract to hire (year to hire)

Pay rate: $43. an hr (based on experience)

Interview Process: In-person panel

Must-Have Qualifications

• Bachelor’s degree in Construction Management, Engineering, Project Management or similar
• Minimum 5 years of Project Management experience
• Utility industry experience

Key Responsibilities & Skills

• Plan, organize, and coordinate project activities across multiple phases.
• Apply project management methodologies (Waterfall, Agile) effectively.
• Communicate clearly through meetings, updates, and written/oral reports.
• Develop and manage project plans, schedules, budgets, and procurement strategies.
• Oversee vendor management: RFP development, bid evaluation, contract negotiation, and performance monitoring.
• Ensure compliance with safety standards and hold teams accountable.
• Build strong relationships with internal and external stakeholders.
• Coach and develop team members on PM principles and techniques.
• Analyze and improve designs, systems, procedures, schedules, and costs.
• Manage project closeout and evaluate success against objectives.

Day-to-Day Overview

This role requires a customer-focused and motivated individual who can thrive in a collaborative environment. Multiple PMs will join the team, so growth opportunities are available. Responsibilities include managing or assisting with projects of varying complexity through all phases: initiation, planning, execution, monitoring, and closeout. The PM ensures projects are delivered safely, efficiently, and within budget while fostering strong stakeholder relationships. Additional duties include maintaining transparency, driving continuous improvement, and supporting informed decision-making. The role emphasizes organizational standards, safety compliance, and process optimization to achieve project goals and customer satisfaction.

Job Title: Packaging Engineer

Duration: 12plus months contract

Location: New Albany, OH 43054

Type of Position: Only on W2 basis

Onsite New Albany 100%

Supplier Call notes:

New drug product packaging

Packaging engineers / packaging verification testing

Open to other industries (food/ consumer product/cosmetics/home fragrance)

Multiple shifts might be required (1st, 2nd, 3rd) - Shift work possible, predominately M-F 8am-5pm, must be amenable to different shift when needed.

Job Description

• This position reports into the Packaging Engineering group under Combination Product Operations (CPO) in Client Ohio (AOH). The position will support global supply, new product introductions, partnerships/acquisitions and combination products.

• This position utilizes physics, engineering and chemistry principles coupled with advanced and diverse materials science understanding and principles to assist in the evaluation, design, qualification and implementation of packaging components and the associated systems such as documentation, equipment and processes.

• A knowledge of common materials utilized in pharmaceutical packaging is key to this role. This role will support Client’s manufacturing network by applying broad knowledge of pharmaceutical packaging operations, equipment, devices, and materials to develop the industry’s best combination product assembly and packaging processes.

• Understanding of packaging manufacturing equipment and processes and how materials interact with these is essential to the position.

• The job will require both planning and technical support of complex projects supporting a new site start-up. This role will be responsible for planning and overseeing projects to ensure on-time completion, establish priorities, report project status updates, and manage project dashboards for the Secondary Packaging Engineering team.

This position is responsible and accountable for the following:

• Project Management of entry level engineers and contingent workers

• Evaluation, recommendation and selection of new secondary packaging materials for pharmaceutical products

• Assessing complex problems relating to materials, recommending and implementing solutions

• Write test protocols, perform technical evaluations and submitting technical assessment reports to justify the use of selected materials

• Write Technical Specifications

• Representing Final Product Technologies as required

• Technology transfer from clinical to commercial or from site to site for packaging components and equipment processes

• Establish priorities to ensure all projects are managed within expected due dates

• Lead and present new packaging ideas, concepts and design ideas to the Product Development team

• Ensures cGMP and regulatory compliance are met

• Ensures that change control procedures are followed working with QA and Regulatory to implement changes

• Participants in Pre-Approval Inspections (PAI) and interact with regulatory bodies (e.g., FDA, EMEA, etc.) as needed

• Collaborates with cross-functional teams (i.e. Research, QA/QC, Supply Chain, Maintenance, Manufacturing, Regulatory, etc.) in pre-commercial and commercial activities

Basic Qualifications:

• Doctorate degree in Packaging Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, or related engineering field

OR

• Master’s degree in in Packaging Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, or related engineering field & 5 years of Packaging Engineering experience

OR

• Bachelor’s degree in in Packaging Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, or related engineering field & 8 years of Packaging Engineering experience

Preferred Qualifications:

• Master’s degree in Packaging Engineering, Materials Science, Pharmacology, Mechanical Engineering, Chemical Engineering, or related engineering field

• 7+ years of packaging engineering experience with 4+ years within the Pharma/Bio industry

Regards

Satya S

Sr. Operations Manager

Phone #: 4

Overview

We are seeking a Data Center MEP Engineer (Mechanical, Electrical, and Plumbing) to provide exceptional design and project management services for data center projects. The ideal candidate will lead internal design teams, work in a client-facing project management position, and manage various projects from concept to completion. This role is critical for ensuring that the data center’s infrastructure is designed to meet the demands of its operations while also being energy-efficient and environmentally friendly.

Employment is project based on the estimated project duration of one year. Extension is possible, although not guaranteed. This is hourly exempt and benefits eligible, including full Medical, Dental, Vision, 401K, Life, Education opportunities, and more.

Key Responsibilities

• Lead design, integration, and delivery of MEP systems (HVAC, UPS, generators, cooling, CDUs, BMS, fire protection) across high-density mission-critical environments.
• Manage both internal and external stakeholders, ensuring design scalability, while ensuring safety requirements are met.
• Drive performance optimization, reliability, and compliance with IEC, IEEE, NFPA, and ASHRAE standards.
• Define HVAC technical requirements and coordinate with other teams.
• Develop office design standards for Data Center and Mission Critical sectors.
• Collaborate across disciplines to create integrated technical solutions.
• Coordinate with Energy Modeling teams to optimize energy efficiency and carbon reduction.
• Serve as client-facing representative on behalf of JB&B and Trinity to offer additional support, leading project with a solutions-based mindset.

Requirements

• Bachelor's Degree in Mechanical Engineering or Electrical Engineering required.
• Data Center experience required.
• 5 years of experience in facility design and construction environments.
• Experience in design, construction, and commissioning of data center HVAC systems.
• Professional Engineering (PE) license preferred.
• Strong knowledge of liquid-cooling systems and energy efficiency metrics (PUE/WUE).

Job Title: Electrical Engineer Associate

Location: New Albany, OH

Duration: 12+ Months Contract to hire

Pay rate: $30 to 35/Hr on W2

Education Requirements:

Associate Degree in Electrical Engineering Technology or related fields plus 2 years of related utility industry work experience.

Experience:

Must have a minimum of a 2 year technical degree preferably in engineering/electronic technology with 1-2 years of utility experience.

Responsible for performing intermediate level technical work and related activities associated with the engineering, design, analysis, research, development, testing, construction, maintenance, and operation of Company equipment and facilities.

Job description:

Coordinate FAC-008 activities of others and provide updates to leadership. Become proficient in navigation and monitoring of the IPS asset database. Must have experience reading one lines and electrical/physical prints. Experience with file management and ability to upload photographs into the Client Verifact system to provide support to the verification team. Data accuracy is critical.

Essential Job Functions & Tasks:

1. Technical Proficiency: Uses knowledge and experience to perform cost effective work in an efficient manner. Exhibits understanding of pertinent equipment, material, systems, and processes. Possesses intermediate level of computer literacy knowledge/skills.

2. Leadership & Guidance: Understands and works within appropriate policies and follows procedures. Provides training and guidance to employees where beneficial.

3. Planning & Organization Ability: Develops knowledge of time constraints for work activities and makes proper adjustments where needed.

4. Problem Solving & Initiative: Actively seeks out information to increase technical knowledge and job skills where beneficial to Client.

5. Communication & Interpersonal Skills: Contributes to team goals. Begins networking with peers to share information and encourage cooperation.

Develops a Win-Win relationship. Understands corporate goals.

6. Decision Making & Business Awareness: Uses decision making skills to perform job more efficient and cost effective.

Demonstrates an attitude, ability, and desire to listen and satisfy both internal and external customers.

Calgon Carbon | A Kuraray Company is growing—and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world.

Position: EH&S Professional II
Location: Columbus Plant – Columbus, OH

Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) – Generous Company Match!
Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities.  

Hours of work: Full-time position with hours Monday-Friday 9:00-5:00 PM

The EH&S Professional II will provide both leadership and tactical support to the Environmental, Health and Safety programs at the Columbus manufacturing location. With strategic guidance from both the central EHS function and local plant manager, this hands-on leadership position will ensure local legislative compliance, develop and maintain ISO systems, develop an autonomous EHS culture, promote defined Health and Wellness programs, define EHS standard operating procedures, provide EHS training, develop risk identification and reduction awareness and methods, all achieved through participation and employee engagement
 
 Duties and Responsibilities (not limited to)
 

• Identify and champion impactful initiatives seeking continuous improvement in safety performance and environmental compliance
• Establish a site high consequence program to manage severe incidents with fatality (SIF) and ensure flawless execution of site life critical programs
• Gauge and correct the execution of site EHS programs through inspections, audits, SMATs, cold-eye reviews
• Coach, mentor, and support the development and guidance of line management on EHS topics
• Proactively drive awareness and communicates best practices related to Safety, Health and Environment, promoting an autonomous EHS culture
• As required, meet with regulatory agencies
• Partner with other key EHS team members during routine calls
• Oversee the filing of all internal, corporate, and required government reporting relating to regulatory compliance
• Maintains an EHS compliance calendar, audits compliance system routinely, and ensure compliance gaps are corrective
• Maintain site required ISO certifications
• Ensure compliance with site permits and plans (indirect discharge, SPCC, SWPPP, Air)
• Manage and ensure compliance with the waste management program (hazardous, non-hazardous, and universal)
• Become a technical expert on site process technologies
• Help operations navigate complex regulations and company standards.
• Establish both a short term and long term EHS strategy for the site in conjunction with guidance from the Plant Manager and CCC/Chemviron Center of Excellence
• This EHS strategy shall be monitored as a KPI across the site and the incumbent will establish accountability channels to ensure that all levels of the organization delivers EHS results
• This individual shall also participate and lead cultural transformation across the site to achieve sustainable results
• Work closely with the Regional Center of Excellence leaders to verify quality of programs and processes via audit and self-assessment tools
   

Qualifications

• A bachelor's degree (B.A. or B.S.), or equivalent from four-year college or university is required (preferably in an Environmental Management discipline, Safety, Industrial Hygiene, Chemistry or Chemical Engineering)
• A master’s degree or equivalent is preferred
• 3-5 years of experience in a manufacturing environment is required
• 3-5 years of working knowledge and expertise in Environmental regulations and maintaining compliance with pertinent regulations is required
• 3-5 years of strong EHS and in OSHA/EPA regulations and reporting experience is required

About Calgon Carbon

At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we’ve been at the forefront of developing cutting-edge technologies and solutions to meet the world’s evolving air and water purification needs.

Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron.

In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe.

Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

PI6f733e6b0fbf-37344-39439977