Engineering Jobs in Springboro, OH

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

  Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Facilities Mechanic Pipefitter 1st Shift (onsite)

What You Will Do:

• Perform repetitive tasks related to preventative maintenance, supply and servicing of facilities, machinery and equipment.
• Assist trade groups as required.
• Under the direction of supervisor or project leader, work from specified methods and procedures, exercise care and use judgment for routine tasks associated with machine and equipment servicing and assist trades groups on projects.
• Assist others in system operation, care, use and preventative maintenance techniques where a limited knowledge of specialized trade terminology is required to understand instructions.
• Work with manufacturing departments and trades groups responsible for developing preventative maintenance servicing schedules for machine tools and equipment.
• Preform similar duties throughout the facility within the scope and skill level of this job description. Assist other trades working on joint projects where common skill crossover provides the opportunity for shared responsibilities and more effective use of skills.
• Refer difficulties to leader/supervisor.
• May be required to train for, obtain and maintain licenses, operator permits and certifications for assigned area.

Qualifications You Must Have:

• High School/ GED
• Requires knowledge of arithmetic involving decimals and fractions to work from drawings and sketches make required computations and to work with variable measuring instruments. 
• 6-12 months experience.

Qualifications We Prefer:

• Should be able to read and comprehend service manuals, instruction booklets and use mechanics’ hand and power tools.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is onsite. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 2nd shift (Onsite)

What You Will Do:

Job Description

• Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts.

• Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals skills.

Qualifications You Must Have:

• High School Diploma or GED.

Qualifications we prefer:

• 1-3 years of machining experience.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment. This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

EV5 Job code: PWH77771 (Production Machinist/Proc C)

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 1st shift .

1st shift hours are Monday through Friday from approximately 6:30 am to 3:30 pm.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious.

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

This position is for 2nd shift. Hours are Monday - Friday 3:12pm - 11:59pm.

What You Will Do :

• Under direction of leader/supervisor, follow assembly drawings and/or specifications and computer information systems to prepare parts and build subassemblies, modules and accessories for new gas turbine engines where tooling and process methods are established. Perform similar duties assisting with engine test operations and performing component and accessory tests as assigned.

• Use overhaul and repair procedures and specifications to perform the mechanical work to overhaul engines, modules and related components.

• Obtain parts, check details for conformance to assembly requirements and fit and measure components to assure overall dimensions are within limits specified.

• Use mechanic’s hand tools, holding fixtures, and specialized assembly equipment to build engine sections and perform installation of details and maintain equipment and tooling for assigned areas.

• Provide related support for test operations and assist with testing under direct supervision and specific test schedules.

• Perform similar duties to assist with co-producer, customer support or other similar programs, retrofit projects and to accommodate new engine programs and assist with changes in specifications.

Qualifications You Must Have :

• High School Diploma or Equivalent & formal training in a specialized field achieving A&P license or equivalent OR 4 years of technical high school including technical post high school certification and 5+ years of heavy automotive experience.

Qualifications We Prefer:

• Experience as an aerospace mechanic or A&P mechanic preferred.

• 3 + years avionics mechanic experience.

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Position Summary:

The purpose of the Quality Manager is to lead and manage our Quality Management System (QMS) and ensure that products, processes, and services consistently meet internal standards and customer expectations.

This role is responsible for ISO 9001 compliance, customer complaint resolution, CAPA management, internal and external audits, process improvement initiatives, and fostering a strong quality culture across operations. The Quality Manager partners cross-functionally with Operations, Engineering, Supply Chain, Service, and Sales to drive continuous improvement and operational excellence.

Key Responsibilities

• Provide leadership and guidance for Quality Assurance activities supporting Operations, Sales, Service, Distributors, and Customers.
• Support the development and maintenance of the Quality Policy and Quality Management System (QMS), ensuring quality objectives are established, tracked, and achieved.
• Develop and execute an internal audit program; conduct audits and support customer and regulatory inspections.
• Ensure timely response to customer complaints and support resolution within established service standards.
• Support Quality System deployment, including implementation, documentation control, regulatory compliance, and product release sign-offs.
• Plan and implement quality policies, procedures, and continuous improvement initiatives to ensure products and services meet internal and customer standards.
• Conduct Management Review meetings to ensure ongoing performance and effectiveness of the Quality Management System.
• Design and implement quality control methods, process improvement initiatives, inspection standards, and testing procedures using Lean and/or Six Sigma methodologies.
• Define and clarify roles and responsibilities related to quality throughout the organization.
• Utilize statistical and analytical tools to identify process improvement opportunities.
• Lead and track quality improvement projects focused on cost reduction, defect reduction, and process standardization.
• Manage Corrective and Preventive Action (CAPA) processes.
• Analyze trends and lead investigations related to product complaints and internal nonconformances.
• Support customer and distributor quality-related communications and issue resolution.
• Ensure ISO 9001 certification compliance for facilities and related activities.
• Lead by example in root cause analysis and proactive problem-solving.
• Support cross-functional continuous improvement initiatives in collaboration with Operations, Engineering, Supply Chain, Finance, and other departments.
• Drive measurable improvements using Lean manufacturing principles.
• Provide training and guidance to employees on quality standards, procedures, and expectations.
• Ensure products and components—from raw materials to finished goods—meet internal and customer quality standards.
• Prepare and maintain quality documentation, including policies, procedures, manuals, work instructions, and training materials.
• Oversee the ISO 9001 program, including compliance, documentation, and audit coordination.
• Respond to facility requests related to quality standards, documentation, and regulatory clarification.
• Conduct compliance audits to assess adherence to quality standards and company policies; provide recommendations for corrective actions.
• Stay current on industry standards, regulatory updates, and quality best practices.
• Perform other duties as assigned.

Qualifications and Skills:

• Minimum of five (5) years of progressive experience in Quality Management within a manufacturing environment.
• Bachelor’s degree in Quality, Engineering, or related technical field required; Master's degree preferred. Equivalent combination of education and experience may be considered.
• ISO 9001 experience required (implementation, maintenance, and audit support).
• Experience with CAPA and structured root cause analysis methodologies.
• Lean Manufacturing and/or Six Sigma certification (Green Belt or Black Belt) preferred.
• Strong understanding of manufacturing processes and quality control methods.
• Proven ability to resolve Sales/Service and Customer quality issues.
• Proficient in ISO Quality System Standards.
• Excellent analytical, decision-making, and problem-solving skills.
• Strong interpersonal, communication, and organizational skills.
• Proficient in Microsoft Office (Word, Excel, PowerPoint) and able to navigate ERP systems and document management software.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

The Cost Estimator is responsible for analyzing project requirements and preparing accurate cost estimates for steel tube products, fabrication, and related services. This role involves evaluating tubular dimensions, specifications, technical drawings, material requirements, labor, production processes, and market pricing to support competitive quoting, profitability analysis, and strategic decision‑making.

Key Responsibilities

Estimating & Analysis

• Prepare detailed and accurate quotations for PTG’s tubular products, including raw materials, processing, fabrication, packaging, and transportation.
• Review prints, specifications, and customer requirements to determine material dimensions, tolerances, and manufacturing needs.
• Apply production times, labor rates, equipment usage, and overhead allocations.
• Evaluate supplier quotes for raw steel, coatings, finishes, and outsourced services.
• Maintain cost models for various steel tube sizes, grades, and manufacturing scenarios.
• Conduct post‑project or post‑quote variance reviews by comparing estimated vs. actual costs and update cost models accordingly.
• Perform cost‑related risk assessments and develop alternative pricing scenarios based on material volatility, production constraints, or changing customer requirements.

Quoting & Pricing

• Prepare customer quotes and proposals within required timelines.
• Ensure pricing aligns with company margin guidelines, market conditions, and cost fluctuations.
• Collaborate with sales, purchasing, and operations to confirm pricing strategies and feasibility.

Data & Documentation

• Maintain a database of historical cost information, supplier pricing, and industry benchmarks.
• Track steel market price trends and adjust estimates accordingly.
• Document all estimate assumptions, data sources, and calculation methodologies.

Cross‑Functional Collaboration

• Work closely with engineering and production teams to identify cost‑saving opportunities.
• Identify and recommend process improvements, alternative materials, or production methods that reduce cost while maintaining quality and feasibility.
• Coordinate with purchasing to validate material availability and updated pricing.
• Support management with budgeting, forecasting, and profitability analysis.
• Interact with Sales and customers to ensure all customer needs are met.

Qualifications

Required

• Experience in cost estimating, preferably within steel manufacturing, metal fabrication, or industrial products.
• Strong understanding of steel tube specifications such as gauge, alloy grades, tolerances, and forming processes.
• Ability to read and interpret engineering drawings (CAD experience a plus).
• Proficiency in Excel or estimating software.
• Strong mathematical and analytical skills.
• Accounting education.
• Bachelor’s Degree.

Preferred

• Background in manufacturing, industrial engineering, or supply chain.
• Experience with ERP or MRP systems.
• Knowledge of welding methods, cutting, bending, and finishing processes related to steel tubular products.

Key Skills

• Cost analysis and modeling
• Technical drawing interpretation
• Vendor and cost negotiation
• Attention to detail and accuracy
• Strong communication and documentation skills
• Time management and the ability to prioritize and handle multiple quotes simultaneously

Work Environment

• Office‑based with regular collaboration with sales, purchasing, and operations departments.
• Occasional shop‑floor visits to observe processes and validate estimating assumptions.

Job Overview: The Purchasing Manager is responsible for overseeing the procurement of raw materials, components, equipment, and services necessary for efficient manufacturing operations. This role ensures supplier quality, cost-effectiveness, and timely delivery while maintaining strong vendor relationships and optimizing inventory levels. The Purchasing Manager will play a critical role in developing and implementing strategic sourcing strategies aligned with business objectives in a fast-paced manufacturing environment.

Key Responsibilities:

• Develop and implement procurement strategies to support manufacturing operations, cost-saving initiatives, and supply chain efficiency.
• Source, evaluate, and negotiate contracts with suppliers to secure the best value in terms of cost, quality, and reliability.
• Maintain and develop supplier relationships, ensuring compliance with company policies, industry standards, and manufacturing requirements.
• Analyze market trends, supplier performance, and pricing to identify cost-saving opportunities and mitigate supply chain risks.
• Collaborate with internal departments, including production, engineering, quality assurance, and finance, to ensure alignment of procurement activities with manufacturing needs.
• Monitor inventory levels and coordinate with warehouse teams to optimize stock levels, prevent production disruptions, and reduce excess inventory.
• Lead and mentor a team of buyers and procurement specialists, fostering a culture of continuous improvement and operational excellence.
• Ensure compliance with regulatory requirements, company policies, and industry standards related to procurement and supply chain management.
• Utilize ERP/MRP systems to track procurement activities, generate reports, and improve purchasing efficiency specific to manufacturing operations.
• Identify and implement process improvements to enhance procurement efficiency, reduce costs, and improve supplier performance.

Qualifications and Skills:

• Bachelor’s degree in supply chain management, business administration, or a related field; a Master’s degree is a plus.
• 5+ years of experience in purchasing or procurement within the manufacturing industry.
• Strong negotiation skills and experience in contract management.
• Experience communicating and negotiating with local and international suppliers.
• Proficiency in ERP/MRP systems (SAP preferred) and Microsoft Office Suite (Excel, Word, PowerPoint).
• Knowledge of sourcing strategies, supplier management, and cost reduction techniques.
• Strong analytical, problem-solving, and decision-making skills.
• Excellent communication and leadership abilities.
• Experience with lean manufacturing principles, supplier quality management, and continuous improvement methodologies is a plus.

Preferred Skills & Competencies:

• Experience in global sourcing and supplier risk management.
• Familiarity with procurement best practices, including sustainability and ethical sourcing.
• Professional certifications such as CPM (Certified Purchasing Manager) or CPSM (Certified Professional in Supply Management) are a plus.
• Knowledge of ISO, Six Sigma, or other quality management systems relevant to manufacturing procurement.

Work Environment:

To perform the essential functions of this role, a successful candidate may be required to operate equipment and tools such as a telephone, computer, and other general office equipment. This position may require the ability to bend, stoop, kneel, crawl, speak and listen on a telephone and in-person, and type on a computer and view a computer screen, among others. This position may have visual, hearing, dexterity, and mental demands. Reasonable accommodation may be made, wherever practical, to enable individuals with disabilities to perform the essential functions of this role.