Engineering Jobs in Signal Hill, CA

As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.

The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.

The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.

As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.

The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.

Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.

Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.

Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.

Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.

Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.

Ability to provide project management reports as required, support senior level and customer reviews as necessary.

Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.

Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.

Ability to participate or lead in the product development process including design reviews.

5 to 10% Travel required.

Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.

Viewed as an expert and/or resource within the field by peers in and outside the organization.

Bachelor’s Degree and a minimum of 9 years of prior relevant experience.

Graduate Degree and a minimum of 7 years of prior related experience.

In lieu of a degree, a minimum of 13 years of prior related experience.

Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.

5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.

6 years’ strong experience with receiver, Antenna, or Radio design (i.e.

RF).

4 years’ experience with embedded Hardware design.

2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills: Strong familiarity with GPS Module design and topology.

Advanced with High-speed Analog design methodologies.

Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.

Familiar with FPGA design methodologies.

Proficient with DO-254 design.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.

The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English or Spanish .

For information regarding your Right To Work, please click here for English or Spanish .

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our shipping department for a Warehouse Associate.

• Pay rate: $18/hr
• Location: onsite in Carson, CA

Job Summary: We are seeking a reliable and dedicated Warehouse Associate to join our Shipping Department team. As a Warehouse Associate, you will play a crucial role in ensuring the efficient and accurate processing of outgoing orders and shipments. Your attention to detail, strong organizational skills, and commitment to teamwork will contribute to the success of our shipping operations.

Key Responsibilities:

- Prepare and pack orders for shipment, ensuring accuracy and completeness of items.

- Utilize shipping software and equipment to generate shipping labels, packing slips, and other required documentation.

- Conduct quality checks on outgoing orders to ensure they meet company standards.

- Collaborate with other team members to prioritize orders and shipments based on deadlines and customer requirements.

- Operate forklifts and other warehouse equipment safely and efficiently.

- Maintain a clean and organized work area, following company guidelines for warehouse organization.

- Assist in receiving and inspecting incoming shipments when necessary.

- Communicate effectively with the team and supervisors, providing updates on order status and potential issues.

Qualifications:

- High school diploma or equivalent.

- Previous experience in a warehouse or shipping environment preferred, but not required.

- Forklift certification is a plus.

- Ability to lift and move packages (up to 50 pounds).

- Strong attention to detail and accuracy.

- Basic computer skills, including experience with shipping software.

- Excellent communication and teamwork skills.

- Willingness to learn and adapt to changing tasks and priorities.

- Ability to work in a fast-paced and physically demanding environment.

- Reliable and punctual with a strong work ethic.

We provide a comprehensive benefits package, including health insurance, a profit-sharing plan, paid time off, and more.

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

Akkodis is seeking an Industrial Engineer for a Contract job with a client in Carson, CA. Ideally looking for applicants who can provide Industrial Engineering support and coordination during the development of aircraft interior components and will be responsible for determining most cost-effective methods to create products. Focal for industrialization on each new program.

Rate Range: $32/hour to $35/hour; The rate may be negotiable based on experience, education, geographic location, and other factors.

Qualifications:

Specialized knowledge

Collaboration – Establishes collaborative relationships to achieve objectives

Communication – Excellent interpersonal and communication (written and verbal) skills

Ability to work independently and follow through on assignments with limited direction; ability to work within and lead in a team oriented environment

Excellent attention to detail.

Project and general management experience

Experience in manufacturing line set-up

Self-motivated and multi-tasker; able to level load own workload.

Level 1 Qualifications:

Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering.

Experience: 0-3 years.

Computer Skills: Proficient with Windows Operating System®, Office XP®, AutoCAD.

Other Skills: Experience with airworthiness regulations desired. Basic Knowledge of Primary processes like CNC machining, Layup and Crush Core. Ability to work well independently and cross-functionally.

Description: Entry-level position within job field.

Level 2 Qualifications:

Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering

Experience: 4-5 years.

Computer Skills: Proficient with Windows Operating System®, Office XP®., AutoCAD. Knowledge of design software

Other Skills: Experience with airworthiness regulations & LEAN tools such as valve stream mapping (VSM) “5S”. Strong Knowledge of Primary processes like CNC machining, Layup and Crush Core.

Description: Intermediate-Mid Level position within job field.

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 61 or

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our inventory department for a Warehouse Associate.

• Pay rate: $18/hr
• Location: onsite in Carson, CA

Job Summary: We are seeking a reliable and dedicated Inventory Associate to join our Inventory Department team. You will play a crucial role in maintaining accurate inventory records, ensuring the availability of products, and optimizing inventory levels. This role requires strong analytical skills, attention to detail, and the ability to work collaboratively with various departments.

Key Responsibilities:

· Monitor and maintain inventory levels to ensure adequate stock availability

· Conduct regular inventory audits and reconcile discrepancies

· Coordinate with suppliers and vendors to manage incoming shipments and deliveries

· Implement and improve inventory management systems and processes

· Generate and analyze inventory reports to identify trends and areas for improvement

· Assist in the development and implementation of inventory control strategies

· Operate forklift and other warehouse equipment safely and efficiently

Qualifications:

· High school diploma or equivalent

· Previous experience in a warehouse or shipping environment preferred, but not required

· Forklift certification is a plus

· Ability to lift and move packages (up to 50 pounds)

· Strong attention to detail

· Basic computer skills, including experience with excel, inventory software or WMS, are a plus

· Excellent communication and teamwork skills

· Ability to work in a fast-paced and physically demanding environment

· Strong analytical and problem-solving skills

· Reliability and punctuality with a strong work ethic

· Excellent organizational and time management abilities

· Effective communication and interpersonal skills

· Ability to work independently and as part of a team

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity for a Project Manager.

• Pay range is $110,000 to $150,000 annually (depending on experience/knowledge/skills)
• Location: onsite in Carson, CA

In this position, you would be a key part of the senior executive team, working with Sales, Operations, Engineering, Quality, Marketing and external Customers. We are seeking a highly motivated and proactive Project Manager to join our dynamic team. The ideal candidate will possess a strong “get things done” attitude, demonstrating the ability to drive projects to successful completion with minimal required supervision. This role demands excellent organizational skills, a keen eye for detail, and a commitment to delivering high-quality results on time and within budget.

Project Execution: Take full ownership of projects from initiation to completion, ensuring all deliverables meet quality standards and deadlines.

Independent Decision-Making: Exhibit strong decision-making capabilities to address challenges and obstacles promptly, maintaining project momentum without the need for constant oversight.

Proactive Problem-Solving: Anticipate potential issues and develop innovative solutions proactively, ensuring smooth project progression.

Team Collaboration: Foster a collaborative work environment, effectively coordinating with cross-functional teams to achieve project goals.

Stakeholder Communication: Maintain clear and consistent communication with stakeholders, providing regular updates on project status, risks, and milestones.

Resource Management: Efficiently allocating and managing resources, optimizing productivity and project outcomes.

Continuous Improvement: Identify opportunities for process improvements and implement best practices to enhance project management efficiency.

Qualifications:

• 4-5 years of proven experience as a Project Manager, preferably in the LED design and manufacturing industry overseeing key projects from start to finish, from initial research to execution.

• Strong organizational and time management skills, with a track record of managing multiple projects simultaneously.

• Manage the day-to-day activities of projects, communicate with project teams as necessary to ensure project deliverables are on schedule.

• Excellent communication and interpersonal skills, with the ability to lead and motivate teams.

• Providing status reports to all stakeholders including the COO.

• Managing project scope and escalating issues where necessary.

• A proactive mindset with a strong focus on problem-solving and achieving results.

• Ability to work independently and make sound decisions under pressure.

• Make recommendations to management about schedules, prioritization, and resource allocation with input from team members.

• Familiarity with project management software and tools.

Preferred Attributes:

• A natural self-starter who thrives in a fast-paced environment.

• Demonstrates a strong sense of ownership and accountability.

• Ability to adapt to changing priorities and requirements.

• Ability to handle a large variety of details and to work with all levels of organization.

• Proficiently utilize MS Word, Excel, PowerPoint, Outlook and SharePoint.

Nice-to-haves:

• Lighting or consumer electronics industry experience

• Bilingual (Chinese and English)

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our customer solutions department for a Technical Product Support Specialist.

• Pay range is $20-35/hr (based on skills/knowledge/experience)
• Location: onsite in Carson, CA

Job Description:

• Serve as the first point of contact for technical inquiries via phone, email, live chat, or a ticketing system.
• Troubleshoot and resolve basic product issues related to installation, configuration, and performance for products such as LED fixtures and lighting control systems.
• Provide pre- and post-sales technical support to sales teams and end-users.
• Document customer interactions, troubleshooting steps, and resolutions clearly and accurately within a ticketing system.
• Escalate complex or unresolved issues to engineering teams and track their progress until resolution.
• Maintain and update internal knowledge base articles and documentation for common issues and solutions.
• Identify errors or omissions in customer facing documentation and work with relevant departments to resolve or improve.
• Stay up-to-date with new product launches, technical specifications, and industry standards by participating in regular training sessions.
• Assist with other technical and product-related tasks as assigned, such as creating wiring diagrams or conducting customer training.
• Assist with onsite customer service visits if required.

Requirements:

• Education: Associate's degree or technical school certification in a related field (e.g., electronics, electrical technology) is preferred.
• Experience: 1+ years of experience in a customer-facing role, preferably in a technical support, customer service, or inside sales position.
• Technical knowledge: Basic understanding of electrical systems, LED lighting, and common troubleshooting techniques is highly desirable. Experience with lighting control systems (e.g., DMX, 0-10V, smart home controls) is a plus.
• Customer service skills: Proven ability to provide excellent service and maintain a positive, patient, and professional attitude, especially during stressful situations.
• Communication: Excellent written and verbal communication skills, with the ability to explain technical concepts to non-technical users.
• Problem-solving: Strong analytical and diagnostic skills with keen attention to detail.

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

Under general supervision, deburr, weld prep and/or clean titanium and aluminum components and sub-assemblies to support all core processes, such as machining, welding, and NDE.

Essential Responsibilities

• 
  
• Support the highest standards of safety and environmental practices.
  
• Deburr machined components for sharp edges.
  
• Hand blend machined and welded surfaces to drawing requirements.
  
• Hand abrade components to desired finish for weld.
  
• Clean components and assemblies per drawing and/or manufacturing work instructions.
  
• Make a continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively.
  
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment.
  
• Check work after completion of each operation in job and/or completed job to ensure it is complete per drawing and/or manufacturing work instruction.
  

$23-$26 per hour

• High school diploma or General Education Degree (GED).
• Aerospace manufacturing experience preferred.

This position is currently accepting applications.

Apply Now

• Determines most practical inspection method and technique; plans sequence of operation; selects precision measuring instruments and equipment to dimensionally inspect units. Performs surface table inspections using standard positioning, measuring and layout instruments and equipment. Uses shop mathematics, decimals and fractions in the performance of the work noted herein.
• Conducts first article, receiving inspection, in-process inspection and final inspection assignments; visually and dimensionally inspects a wide variety of airframes parts and aerospace assemblies/components.
• Witness's first piece part production and certifies acceptability; observes and performs in-process inspection during component build-up and sub-assembly stages; performs final assembly inspection and observes testing operations to assure quality, workmanship and strict compliance with Arrowhead, military space and commercial specifications and standards.
• Inspects incoming metallic and fiber materials, plastic and rubber compounds for correct formulation call- out, serialization, identification, cure date and shelf life; verifies vendor and material certifications; checks heat codes, batch and lot numbers to assure product tractability; certifies the proper mixing and blending of bonding agents and adhesives. Inspects reinforced plastic and rubber products for delaminating, blisters, porosity, bond, elasticity, gauge surface smoothness and similar defects or characteristics. Checks configuration and part dimensions with or without the aid of assembly check gauges, fixtures and tooling. Prepares shipping data package for non-metal (soft goods) components/assemblies in accordance with contractual requirements.
• Monitors oven and cure processes and records temperature readings and dwell time; performs or observes pressurization and leak test using plant air, nitrogen and helium.
• Prepare rework tags, inspection reports and documentation. Coordinates rejection with MRB, engineering and customer representatives for depositions and process refinement. Assembles end item documentation for the review and acceptance of finished products. Prepares and maintains history files, records and reports.
• This job description is not all inclusive of all duties. Other duties may be assigned.

• Requires High School degree or GED. Related AA or trade school degree preferred.
• Requires 2+ years of related Quality Assurance inspection experience. Experience must include interface with customer source representatives, government sources, internal departments and senior management.
• US Citizenship or permanent residency.

• ASQ Certified Quality Inspector preferred
• Experience working in AS9100 production environment preferred
• Must be able to read and analyze engineering drawings and blueprints to determine requirements.
• Must be proficient in the use of basic inspection tools, calipers, scales, height gauges, optical aids, micrometers and GD&T.
• Must have experience with production processes such as assembly, forming, tooling, welding (fusion & resistance), heat treat, cleaning
• Must have experience with production machinery and equipment such as press forming, tube bending and other fabrication.
• Must have knowledge of metallic materials such as stainless, nickel, titanium, aluminum.
• Must have experience with composites materials and production processes such as elastomers, resins, and composite reinforcement material.
• Must be familiar with AS9102 standards and software, and military specifications.
• Experience using Net-Inspect standards and software preferred.
• Must interface effective across organizational levels.
• Must have good organizational skills and maintain accurate, complete documentation.
• Must have excellent communication skills, both written and oral.
• Must be proficient with the use of the Internet, MS Word/Outlook.

• N/A

• Lift up to 50 lbs.
• Push and pull 50 lbs.
• Bend Occasionally
• Sit, Stand, and Walk Frequently

• Working knowledge of NetInspect, Inspection Expert, AS9100, AS9101, Boeing, Northrop, Lockheed Martin, UTAS, Honeywell, and DCMA specifications.
• ASQ Certified Quality Inspector (CQI) certification is expected to be achieved within 12 months from the first day of employment.

Faraday Future (FF) is a California-based mobility company, leveraging the latest technologies and world's best talent to realize exciting new possibilities in mobility. We're producing user-centric, technology-first vehicles to establish new paradigms in human-vehicle interaction. We're not just seeking to change how our cars work we're seeking to change the way we drive. At FF, we're creating something new, something connected, and something with a true global impact.

We are seeking a strategic and driven Senior Manager, Product Marketing to lead our go-to-market efforts for the next generation of luxury electric vehicles. This pivotal role bridges product innovation and customer storytellingbringing together market insight, technical knowledge, and customer experience to deliver impactful marketing strategies and product launches.

• Lead market and user research to define luxury EV buyer personas and decision-making journeys.
• Monitor industry and technology trends, including global EV policy developments, charging infrastructure evolution, and competitor moves in pricing and innovation.

• Develop comprehensive, full-funnel marketing strategies across the product lifecyclefrom awareness and pre-order to delivery and ownership.
• Craft compelling value propositions and translate technical features into clear, customer-centric benefits.
• Partner with product, design, and regional teams to support international market entry strategies.

• Lead cross-functional go-to-market planning and execution, ensuring alignment across product, manufacturing, sales, and communications.
• Build sales enablement materials including competitive battle cards, product configurator guides, and training decks.
• Support launch event planning and coordination, from strategy to messaging alignment.

• Define and track key performance indicators (KPIs) such as brand awareness, lead-to-order conversion, and customer retention.
• Conduct A/B testing and marketing ROI analysis to refine messaging, channels, and investment strategies.
• Document learnings and develop repeatable GTM playbooks for future product launches.

• 10+ years of experience in product marketing within automotive, electric vehicles, luxury consumer goods, or tech hardware industries.
• Proven track record managing complex product launches under tight timelines in fast-paced environments.
• Strong command of customer segmentation, go-to-market strategy, and sales enablement.
• Analytical mindset with experience in ROI measurement and marketing optimization.
• Excellent verbal and written communication skills with a knack for storytelling and translating complexity into clarity.
• Bachelor's degree in Marketing, Business, Engineering, or a related field.

• Startup or hyper-growth company experience.
• Familiarity with international markets, especially North America and China.
• Passion for sustainability, design, and innovation in the mobility sector.

($145K - $175K DOE), plus benefits and incentive plans

• Healthcare + dental + vision benefits (Free for you/discounted for family)
• 401(k) options
• Casual dress code + relaxed work environment
• Culturally diverse, progressive atmosphere

Faraday Future is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

About the Company:

The company is a leading metal additive manufacturing (AM) partner for aerospace and defense organizations. They design, optimize, and produce mission-critical hardware that enables customers to leverage AM technologies in ways previously thought impossible. Their team supports cutting-edge programs across aviation, space, and national defense, delivering engineering excellence from concept through production.

About the Role:

The Principal Additive Manufacturing Engineer – Applications is a senior, customer-facing technical authority. You will work directly with aerospace and defense primes, OEMs, and government organizations to guide AM strategy, influence design decisions, and deliver advanced metal AM solutions for high-stakes missions. This role operates at a peer-to-peer level with senior customer engineers and plays a key part in shaping the future of AM adoption across critical defense and aerospace programs.

What You'll Do:

• Serving as the senior technical lead and trusted advisor for key aerospace and defense programs.
• Leading AM strategy, qualification plans, and adoption pathways across complex customer missions.
• Running technical design reviews, engineering workshops, and program strategy sessions with customer leadership.
• Translating mission and performance requirements into optimized metal AM solutions that balance cost, risk, and reliability.
• Developing high-impact proposals, white papers, and technical recommendations for advanced AM applications.
• Driving implementation of DfAM best practices, simulation-based optimization, and qualification approaches for mission-critical hardware.
• Working cross-functionally with business development, manufacturing, and quality teams on capture strategies and program execution.
• Acting as the primary technical interface from concept through qualification and production.
• Mentoring engineers and elevating the organization's customer-facing AM technical depth.
• Ensuring compliance with aerospace standards: AS9100D, NADCAP, MIL-SPEC, ITAR, and other regulatory requirements.

What You Need to Bring:

• Recognized expertise in metal additive manufacturing for aerospace and defense applications.
• A proven ability to influence design, qualification, and engineering decisions at primes, OEMs, and government agencies.
• Deep knowledge of LPBF/DMLS, DED, and hybrid AM processes and relevant alloys (Ti, Ni, Al, Cu).
• Strong background in aerospace materials science, metallurgy, and thermal-mechanical behavior of AM components.
• Proficiency in CAD (NX preferred), AM simulation tools, and FEA, with the ability to present technical findings clearly.
• Demonstrated success presenting to executive and non-technical customer stakeholders.
• Understanding of AS9100D, NADCAP, MMPDS, MIL-SPEC, and aerospace certification and qualification pathways.
• Leadership skills to mentor and guide engineering teams in both technical execution and customer engagement.
• Bachelor's degree required (Mechanical, Aerospace, or Materials Engineering).
• Master's degree preferred.
• 10+ years in aerospace/defense AM engineering, advanced design, or manufacturing applications.
• Eligibility to obtain and maintain a DoD SECRET Security Clearance (required for employment).

Benefits:

• Comprehensive medical, dental, and vision insurance
• 401(k) retirement plan
• Dynamic, collaborative culture focused on innovation and professional growth

Why Join:

Join a team that's redefining aerospace and defense manufacturing through innovation, collaboration, and purpose. Here, you'll:

• Work on real flight hardware that supports next-generation space and defense missions.
• Be part of a fast-growing, hands-on engineering culture where your ideas make an impact.
• Collaborate with experts across design, materials, and production to advance the frontiers of metal 3D printing.
• Access career development opportunities, advanced AM technologies, and a mission-driven environment that values curiosity and continuous learning.