Engineering Jobs in Saint Francis, MN

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon’s Land Air Defense Systems ( LADS ) Engineering Execution Department is seeking a skilled and motivated Cross Product Team Lead (CPTL) to support a large Patriot missile program. The CPTL is responsible for various engineering activities, including defining early integration in cooperation with the project development teams, directing CPT engineers, supporting the planning for requirements sell off, planning, execution, and analysis for system integration and verification, in hardware-in-the-loop facilities, ground and flight tests. Activities require the ability to support alternate shifts and/or extended hours and require travel. This position is onsite based in Andover, MA .

What You Will Do

• Responsible for cost, schedule and execution for Missile systems integration, verification and validation scope across a program.
• Lead a small team of engineers with planning and execution of integration and test activities for missile sub-assemblies.
• Working with systems engineers to define knowledge points ensuring risk burn-down throughout the development process.
• Mentor junior engineers with establishing methodical and disciplined processes for planning and execution of integration and test activities.
• Prepare documentation such as test plans, procedures, integration information sheets, test cases, and reports.
• Analyze data to identify and resolve system performance issues and complete requirement verification.
• Compile, summarize, and present data analysis to internal and external stakeholders, including program leadership and external customers.
• Collaborate across engineering functions to drive performance and resolve issues. Includes working closely with operations and manufacturing teams.
• Brief Program Management and USG customer on plans and status
• Travel as required to meet programmatic objectives. Regular travel between multiple Raytheon locations in Massachusetts is required. Occasional domestic and potential international travel.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience.
• Experience developing program baselines, managing cost, schedule and quality for technical projects.
• Experience leading/contributing to proposals, such as creating BOEs or contributing to leadership proposal reviews.

• Active and transferable U.S. government issued SECRET security clearance is required prior to start date. U.S. citizenship is required as only U.S. Citizens are eligible for a clearance.

Qualifications We Prefer

• Experience with system integration, verification and test of complex missile systems.
• Experience with planning and conducting integration and test events such as flight test missions.
• Earned Value Certification.
• Test Architect Certification.
• Ability to collaborate with other engineering disciplines, Quality, Reliability, and program management.
• Strong communication and leadership skills for coordinating across internal and external stakeholders.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligibility– Relocation assistance is available.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

• MA Locations: Raytheon Andover, MA Location

#LI-Onsite

#LI-HS30

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Manufacturing Engineers learn production operations and the manufacturing discipline in a controlled environment. They develop manufacturing engineering skills alongside their team; internalize an understanding of safety, quality, delivery, and cost; and use Raytheon systems and tools to create innovative and unique solutions to today’s manufacturing challenges. Manufacturing Engineers build technical depth into manufacturing processes and are accountable for improvement and optimization.

Primary responsibilities include developing the comprehensive manufacturing process for 3D metal parts for various radar, integrated sensor, and effector programs. The candidate will create, test, and upgrade Coordinate Measuring Machine (CMM) programs, develop and document fixturing and setups for CMM inspection, and create inspection plans. They will also assess process failures, disposition non-conforming hardware, and create and execute robust Root Cause/Corrective Action plans to permanently solve problems. This position requires close cooperation with the Operations team and other engineering disciplines. The desired candidate will possess excellent communication skills and be capable of working in a dynamic team environment.

What You Will Do

• Translate engineering design requirements into formal manufacturing process documentation including CMM programming, inspection planning, finishing requirements, and assembly instructions

• Support process improvements using data analysis, application of best practices, engaging with production personnel, and implementing innovative solutions to improve process capability and decrease cost

• Design, control, and improve the manufacturing process through collaboration with a multi-disciplined team

• Self-manage workload to support existing production, perform non-recurring engineering work for new products, and drive improvement projects to completion.

• Communicate effectively with Engineering and Operations leaders in department to ensure schedule needs are met and where any barriers to progress exist.

• Perform process development on new product introductions with an accelerated time to market

• Support continuous improvement initiatives and document standard methodologies and standard work for CMM and manual inspection operations

• Review metrology and statistical process control (SPC) data to identify and address potential defects before they occur

• Troubleshoot manufacturing issues alongside Quality and Operations personnel and apply CORE/6-sigma methods to determine Root Cause and apply Corrective Actions

Qualifications You Must Have

• Typically requires a Bachelors degree in Science, Technology, Engineering or Math (STEM) and a minimum 5 years of prior relevant experience. 

• Knowledge of CMM programming and workpiece holding and manual inspection methodology

• 5+ years correctly interpreting engineering drawings, including ASME Y14.5 Geometric Dimensions and Tolerances as well as typical government and industry specifications

• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• CMM programming experience for complex workpieces typically requiring 4+ axis machining centers

• Demonstrated working knowledge of Creo CAD Software

• Process familiarity with paint, plating, and structural assembly

• Results-oriented focus on past projects to evaluate success

• Demonstrated hands-on mechanical aptitude

• Strong organization skills with ability to manage multiple tasks simultaneously

• Ability to work individually to support team/department success

• Excellent written, verbal, visual, and graphical communication skills

• Possess excellent judgment and professional maturity

• Knowledge and ability to apply CORE principles and techniques

• Active DoD Security Clearance

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

About Us

Designing Earth Contracting (DEC) utilizes today's latest technology and experienced staff to provide our clients with services that are second to none. Our family-owned business has decades of experience in sitework and utility services. We are conveniently located in East Bethel, MN and provide services to all of Minnesota and Western Wisconsin.

Designing Earth Contracting's continued success has been built on consistently delivering high quality services to our clients. Our highly skilled staff provide the highest degree of customer service and knowledge to our clients. We deliver quality work while always maintaining safety first. This allows us to continually grow our network, maintain repeat business and gain referrals.

Position Summary

We are seeking an experienced Estimator/Project Manager to join our team. This role is responsible for preparing accurate cost estimates and leading the planning and execution of diverse constructions projects. The ideal candidate will have a strong background in estimating, project management, field operations and ensuring successful project execution from bid to project completion.

Responsibilities

Estimating

•        Manage all aspects of bid preparation, including but not limited to: reviewing documents, soliciting vendor/sub-contractor quotes, preparing cost estimates and submitting bid proposals.
•     Collaborate with clients, engineers, and vendors to ensure competitive and accurate bids.
•     Perform site visits and pre-bid meetings for accurate project assessments.
•         Conduct detailed quantity takeoffs and cost analysis using Trimble Business Center and Viewpoint.
•       Lead the transitions from project award to execution, ensuring seamless handoff to foreman and project team.

Project Management

•       Develop and communicate projects schedules with General Superintendent and project Foreman.
•         Attend weekly progress meetings
•         Oversee subcontractors and vendors to maintain timelines and budgets.
•         Track project costs, identify and address areas of inefficiency and prepare and submit change orders in a timely manner.
•       Ensure all project documentation and billing are processed in an accurate and timely manner.
•       Act as the primary client liaison, building and maintaining strong relationships.

Requirements

Education/ Experience

•         Bachelor of Science degree in Construction Management, Civil Engineering, or equivalent
•        Alternatively, at least five years of construction experience as a Quality Control Manager, foreman, or superintendent, or a combination of education and experience.

Skills

•        Proficiency preferred in:

 MS Office Suite (Word, Excel, Outlook, Project)

Trimble Business Center

Viewpoint

•        Strong leadership, communication, and critical thinking skills.
•        Ability to read and interpret construction plans and specifications.
•       Strong knowledge of safety awareness (OSHA, MMUTCD)
•        Manage multiple projects with competing demands and meet deadlines.
•        Ability to work both independently and collaboratively as a part of the team.
•       Must posses a valid driver license and a clean driving record.

Benefits of joining our team!

•     Privately owned family business
•       Company paid vehicle and fuel
•    Company paid insurance (Employee & Family)
•     401K match
•     Annual performance bonus
•    Advancement opportunities
•   Annual company events

Equal Opportunity Employer

DEC prohibits discrimination against any applicant or employee on the grounds of sex, race, color, age, religion, national origin, marital status, disability, sexual orientation, or any other legally protected status.

Please apply at  

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Manufacturing Engineers develop and improve manufacturing processes by studying products and manufacturing methods. They provide premier engineering and manufacturing support expertise to enable on-time, lowest-cost hardware delivery with performance and reliability that exceeds customer expectations. They execute across all phases of a program including proposal capture, process development, transition to production, and production support. Manufacturing Engineers design, control, and improve the manufacturing process and system design through a collaborative effort with the value stream team. You would apply your skills to implement improvements that reduce cycle time and cost and improve productivity, while maintaining a high level of safety in the manufacturing environment and quality within the product.

What You Will Do

• Develop, maintain, and review Manufacturing Data Packages (MDPs) including assembly instructions, workflow/routing, labor standards, tool and fixture designs

• Support a manufacturing area as part of cross-functional team by guiding the production team through process troubleshooting and incorporation of engineering changes into the MDP

• Disposition non-conforming material with root cause and corrective action analysis as required

• Drive Continuous Improvement through process improvements to improve cycle time, reduce ergonomic risk to assemblers, automate, reduce costs (both direct and indirect) using CORE principles and data driven decision making

• Provide real-time technical support to manufacturers and fabricators; in-house as well as the supply base.

Qualifications You Must Have

• Typically requires a Bachelors degree in Science, Technology, Engineering or Math (STEM) and a minimum 2 years of prior relevant experience. 

• 1+ year of working in a manufacturing environment

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Proficiency with CAD solid modeling tools (preference for CREO/ProE) and/or simulation tools

• Experience with designing, programming, maintaining, and troubleshooting automated tooling and machinery

• Experience with military and industry standards

• Familiarity with standard material handling practices, especially as they pertain to Electrostatic Discharge mitigation requirements

• Active DoD security clearance

• Proficient use of Microsoft Office suite (Excel, Powerpoint, Project, Word, etc…)

• Proven written and oral communication skills, including presentation skills

• Self-motivated and results oriented individual with an ability to work in a team environment and with minimal direct supervision

• Demonstrated hands-on mechanical aptitude with the ability to work across disciplines

• Innovative mindset that drives continuous improvement and keeps pace with advances in technology

• Excellent organizational skills with fine attention to detail and an ability to manage multiple tasks simultaneously

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Systems Engineering & Test Capabilities team discipline is seeking a Test Architect to support the NASAMS® surface to air defense system programs. The Test Architect (TA) will be accountable for architecting a technically sound approach for the Test and Evaluation (T&E) strategy for the entire lifecycle of the product along with influencing the prime item architecture to support that strategy.

 

What You Will Do

• Responsible for test strategy for all aspects of the program and defines metrics to gauge progress.

• Responsible for defining or optimizing test environments and requirements to ensure on-time deliveries.

• Responsible for interface and coordination with internal and external organizations on test strategy, coordination, execution, and reporting activities.

• Extensive interaction with Program Managers, Directorate Leads, Chief Engineers, and technical subject matter experts (SMEs).

• Coordinate with other program disciplines to draw on their SMEs to address emergent issues across the systems, software, and hardware domains.

• Represent the interests of the Systems Integration and Test (SI&T) discipline on the program.

• Interface with the customer community on a regular basis to share test status, issues, and address programmatic concerns.

• Knowledge base for Model Based Systems Engineering and how to use this in Integration and Test for test strategy.

• International travel up to 20%, Regular travel between Raytheon locations in Massachusetts and Southern New Hampshire is required.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience

• Experience with formal system test activities, including ground tests, flight tests, system verification, and system integration check out events

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date with the ability to obtain a Final Secret U.S. government issued security clearance after start.

Qualifications We Prefer

• Excellent technical writing and formal presentation experience

• Strong proven communication skills

• Raytheon Test Architect Certification

• Experience with Department of War or similar major programs throughout the product lifecycle

• Active and transferable U.S. government issued security clearance is required prior to start date.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Job Summary:

An exciting opportunity exists for a Sr. Principal RF Module Design/Development Engineer to join our Module Development Section with the Advanced Microelectronics Solutions (AMS) Department as a technical lead. The AMS department designs, fabricates, and tests state-of-the-art Monolithic Microwave Integrated Circuits (MMICs) in our on-site foundry. These chips are designed into custom modules to support multiple programs and enhance the capabilities of next generation radar systems.

The successful candidate will be responsible for leading the technical design and development of RF/microwave modules containing GaAs- and GaN-based monolithic microwave integrated circuit (MMIC) products. This would be in active support of existing technologies in production as well as next generation products in development. This position requires a strong academic background and experience in RF/Microwave Design, Development, Integration & Test.

What You Will Do:

• Designing RF structures and transitions on multi-layer, multi-channel RF Modules and analog circuitry enabling both receive and transmit behavior

• Consulting across RF module design, MMIC design and assembly teams

• Troubleshooting RF Modules that are prototyped and under development

Qualifications You Must Have:

• Typically requires a Bachelor’s Degree in a Science, Technology, Engineering & Math (STEM) Field and Ten (10) or more years of relevant experience (An advanced STEM degree could count for 3 years of experience) with Microwave/RF module, subsystem and component analysis, design, and test

• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer:

• A Master’s degree or PhD. in a Science, Technology, Engineering & Math (STEM) Field 

• Experience leading teams and/or projects

• Experience in module/sub-system assembly & packaging process

• Experience in thermal modeling and analysis.

• Experience of different topology trade-offs, process and active/passive component selection, system/sub-system level, gain-loss analysis and flowing down requirements from the system to the component level

• Hands-on experience with electromagnetic simulation tools such as HFSS, ADS, CST.

• Layout experience in Mentor Graphics’ Xpedition, Cadence Virtuoso or AutoCAD

• Experience with analytical tools such as Matlab, Python, or JMP

• Experience in cost estimating, budget and schedule management

• Understanding of allocating and flowing down requirements from the system to the component level

• Experience in a production environment

• Experience with microwave testing techniques, including using spectrum analyzers, Real-time Spectrum Analyzers (RSAs), Vector Network Analyzers (VNAs) and Performance Network Analyzer (PNAs)

• Experience with GaAs and/or GaN MMIC devices

• Current DoD Secret level security clearance

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Systems Engineering and Test Capabilities (SE&TC) is seeking a Section Leader for the System Integration and Test (SI&T) Integrated Systems Department. This department supports multiple programs including Patriot and NASAMS Systems. As a Section Leader, the candidate will be expected to actively participate in Department level leadership team goals and initiatives, support department hiring and program staffing, provide employee feedback and mentoring, and be actively involved in daily program operations. This position provides an opportunity to grow your skillsets by contributing to the development of our workforce and creating and fostering a collaborative environment.

What You Will Do

• Lead a cross functional team of engineers

• Establish meaningful and measurable goals and communicate effectively with the team

• Oversee the direct line management activities for the section including communication, performance impact, career development, and talent acquisition

• Support department and discipline level initiatives

• Ensure employee compliance with company policies and procedures

• Oversight of personnel issue resolution

• Adhere to and ensure alignment to Raytheon Technologies Values and Behaviors

• Work as a technical lead or individual contributor; Section Leader duties account for approximately 10% of the employee’s time.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience

• Experience in system, software, and/or test.

Qualifications We Prefer

• Strong communication and interpersonal skills

• Experience with team leadership

• Experience with the Earned Value Management System (EVMS) or similar budget tracking system

• Experience with Raytheon’s Proposal Capture Process (development of Basis of Estimates, etc)

• Experience with the Estimate at Complete (EAC) process

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Systems Engineering & Test Capabilities team discipline is seeking a Senior Systems Engineer to support integration and test activities for NASAMS (surface to air defense system) programs. In this role you will collaborate internally across functions and externally with our industry partners and U.S. Government customers to plan, prepare and execute Product Acceptance Testing and System Demonstration of the NASAMS Fire Unit. This position reports into the overall NASAMS SI&T Cross Product Team Lead.

What You Will Do:

• Support the test architect in the integration and test strategy development and implementation to include metric collection and tracking.

• Support the development and review of test plans and test procedures.

• Support the planning, preparations, and conduct and product acceptance, system demonstration, and System Integration and Checkout (SICO) events.

• Identify and coordinate resources required for execution of demonstration and test events.

• Responsible for providing technical assistance to the program SI&T CPT lead to include development of technical briefings for program and engineering leadership.

• International travel up to 20%. Regular travel between Raytheon locations in Massachusetts and Southern New Hampshire is required.

Qualifications You Must Have:

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics. (STEM) and a minimum of 5 years of prior relevant experience.

• Experience with the systems, software, operation, integration, and/or test.

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date with the ability to obtain a Final Secret U.S. government issued security clearance after start.

Qualifications We Prefer :

• Experience with DOORS

• Experience with the integration and test of Air Defense Systems

• Experience with creating test scripts, and/or conducting performance analysis.

• Experience with Microsoft applications.

• Effective written and verbal communication, customer focus, collaboration, and multitasking skills.

• Active and transferable U.S. government issued security clearance.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role

• Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Job Summary:

An exciting opportunity exists at Raytheon for a Semiconductor Dry Etch Engineering Lead  to join our III-V compound semiconductor foundry team fabricating gallium nitride and gallium arsenide-based devices within the Advanced Microelectronics Solutions (AMS) Department.  This role requires a broad understanding of microelectronics processing and subject matter expertise in one or more dry etch related techniques including plasma ashing/descum, reactive ion etching (RIE), and inductively coupled etching (ICP).

As a member of the AMS Department, the individual in this role will serve as the dry etch processes lead engineer and collaborate with the various engineering work centers in the III-V semiconductor wafer foundry. The candidate will lead and assist projects in process sustainment, capital allocation, directing process and capital qualifications, improving cycle time, improving product yield, developing new data driven controls, and driving overall wafer movement efficiency.

The chosen candidate is expected to be an innovative and creative thinker capable of probing issues and reaching solutions both independently and in a team environment. The ideal candidate will have working knowledge of various microelectronics processing techniques beyond deposition, including wet and dry etching, lift-off techniques, photolithography, metrology, process characterization, foundry data integrity, and large data analysis methods.

The candidate is expected to work well in large and small, cross-functional teams, understand foundry processes, determine capacity limitations, improve overall equipment effectiveness, identify yield improvement opportunities, gather sponsorship and team resources, and execute on continuous improvement activities. Presence on the foundry floor is essential for quick resolution of technical issues as well as the ability to work with operations, facilities, equipment, and quality teams. The role requires a large degree of multitasking with attention to detail while managing priorities depending on the nature of the problems and the commitments.

This role will be 100% on-site and based in Andover, MA.

What You Will Do:

• Sustainment of current dry etch production processes and involvement with development of new process
• Set and report center priorities at the 8am foundry tier meeting
• Identify process improvement opportunities
• Lead 8Ds and RCCAs
• Create, document, maintain and approve work instructions
• Assist process engineers in training users and operators on semiconductor processes and equipment
• Manipulate large datasets and use statistical analysis to define SPC controls, manage projects, and assign risk
• Develop and report on actionable deposition work center health metrics
• Identify capital needs, collaborate with tool vendors, assist in tool acceptance, and create plans/schedules for tool and process qualifications
• Frequently work on the foundry floor and interact with various process engineering, equipment engineering, digital technologies, quality, facilities, and operation teams

Qualifications You Must Have:

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience in semiconductor processing techniques including photolithography, dielectric deposition, metals evaporation, and optical or scanning electron microscope inspections
• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer:

• Knowledge of dry etch tools, tool health monitoring, uniformity controls, SECS/GEM experience, and proficient in statistical process control
• Excellent communication skills to effectively transfer ideas
• Broad knowledge related to semiconductor processing, device physics, and data analysis
• Experience troubleshooting a wide range set of fabrication equipment in addition to establishing equipment qualification and preventative maintenance procedures
• Experience in a data analysis software packages (e.g. MATLAB, Python, SQL, JMP)
• Ability to lead and coordinate technical projects with cross-functional teams
• Experience with characterizing, understanding, and improving semiconductor device performance and reliability

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Principal Product Engineer will learn the technical aspect of key product in the Andover, MA factory. The Product Engineer will be product centric technical liaison, focused on driving collaboration across work centers and all disciplines to resolve technical issues, improve efficiencies and optimize overall product yield to ensure high-quality and cost-effective products and systems. You will utilize data analysis, CORE methodologies, and technical understanding to maximize overall product test yield, efficiency, and value.

What You Will Do

• Address major yield and technical issues highlighted by tech leads and factory operation managers.

• Perform data analysis and provide direction for overall product yield and performance improvement.

• Facilitate collaboration across manufacturing work centers and design engineering.

• Empower production test engineer to resolve complex failures through data driven troubleshooting technique.

• Establish technical understanding of the product architecture, subassemblies, and test requirement.

• Partner with test and design engineering team to develop sustaining solution to technical problems with root cause and corrective action identification.

• Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment.

Qualifications You Must Have

• Requires a Bachelors degree in Science, Technology, Engineering or Math (STEM) and typically a minimum 8 years of relevant experience

• 4+ years in Production testing/troubleshooting

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Preferred majors: Electrical Engineering, Computer Science/Engineering Technology

• The ability to interpret and analyzer RF parametric data

• Experience with lean principles in a manufacturing environment

• Current DOD Secret Security Clearance

• Excellent communication skills (written and verbal) and presentation skills

• Good interpersonal skills to manage tasks that bridge operations, production control, engineering, supply chain, and customer relations

• Experience applying technical principles in the manufacturing life cycle

• Experience with Quality Systems and their application

• Shop Floor Management

• Strong engineering aptitude and analytical skills

• Technical problem solving

• Customer and company oriented and driven to meet or exceed expectations

• Ability to work cohesively in a team environment

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms