Engineering Jobs in Rockledge, PA
133 positions found
Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.
Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.
Essential Job Summary::The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet.
Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.:Diagnostics & Repair
- Independently diagnose and repair:
- Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components).
- Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines.
- Air and hydraulic brake systems, ABS, and suspension components.
- Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing).
- Electrical systems including starting/charging, multiplex wiring, sensors, and lighting.
Preventive Maintenance & Compliance
- Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented.
- Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis.
- Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues.
Road Calls & Operational Support
- Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed.
- Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times.
Mentorship, Training & Documentation
- Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods.
- Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used.
- Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization.
- Independently diagnose and repair:
- High school diploma or GED required.
- 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement.
- Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT.
- Demonstrated proficiency with hydraulic, pneumatic, and electrical systems.
- Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics.
- Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred.
- ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred.
- Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred.
- Familiarity with computerized fleet maintenance and parts inventory systems preferred.
This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.
Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Salary Range Minimum: USD $28.80/Hr. Salary Range Maximum: USD $32.00/Hr.
Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.
Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.
Essential Job Summary::
Our Yellow Iron Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns.
Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.:- Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks)
- Performs repairs and assigned preventative maintenance services.
- Estimates time and material cost on vehicle repairs and requisition of new parts.
- Conduct safety checks on vehicles.
- Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time.
- Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports.
- Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards.
- This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts.
- Assists Sr. Technicians in the completion of project work.
Work Environment
- Potentially hazardous work environment with many moving parts and machinery; must be alert of surroundings at all times.
- Only during breakdowns will this position be required to enter transfer station loading/ dumping area.
- The Yellow Iron Diesel Technician/Mechanic may be required to lift up to 50 pounds. Frequent squatting and standing is required.
Requirements
- Applicants must be at least 18 years of age and legally eligible to work in the United States.
- A valid driver’s license is required. CDL a plus.
- At least 5 years of experience in job duties.
- Sanitation or construction industry experience a plus.
- Computer diagnostic experience as diesel technician a plus.
- Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar.
- Working knowledge of applicable DOT and OSHA standards and regulations.
- Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records.
- Must be able to meet the physical and safety requirements of the position.
- Must be able to provide own tools
This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.
Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Salary Range Minimum: USD $30.00/Hr. Salary Range Maximum: USD $38.00/Hr.
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Quality Engineer
Job Code: 34010
Job Location: Camden, NJ (On-site)
Schedule: 9/80 Regular (Every Other Friday Off)
L3Harris is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
About L3Harris Technologies:
L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across space, air, land, sea and cyber domains. L3Harris has approximately $18 billion in annual revenue and 47,000 employees, with customers in more than 100 countries.
Job Description:
We are seeking a highly motivated Quality Engineer (QE) to join our Quality team. This role is responsible for ensuring that supplied materials and components meet internal and external requirements for quality and compliance. The ideal candidate will have hands-on experience with SAP, a strong understanding of outbound logistics and shelf life labeling, and a working knowledge of aerospace quality clauses and industry standard.
Essential Responsibilities
* Lead quality assurance activities from onboarding through lifecycle support.
* Perform audits, assessments, and root cause investigations for non-conformances.
* Collaborate with suppliers to ensure compliance with customer quality clauses and AS9100/ISO9001 standards.
* Review and validate shelf-life labels, certifications, and documentation for outbound shipments.
* Monitor performance and implement corrective actions using 8D, 5-Whys, or similar tools.
* Utilize SAP to manage supplier data, track inspections, and process quality notifications.
* Coordinate with purchasing, logistics, and engineering teams to resolve supply chain quality issues.
Qualifications:
* Bachelor's degree in engineering, Quality, or related field.
* 3+ years of experience in Supplier Quality, Manufacturing Quality, or related role in the aerospace or defense industry.
* Proficiency in SAP for quality and supply chain processes.
* Familiarity with outbound logistics, labeling requirements, reviewing CoC's, and shelf-life management.
* Strong understanding of aerospace quality clauses, contracts, and regulatory requirements (e.g., FAA, EASA, DoD).
Preferred Additional Skills:
* Excellent communication, organizational, and problem-solving skills.
* ASQ Certified Quality Engineer (CQE) or similar certification is a plus.
* Knowledgeable in MS Office tools: Word, Excel, PowerPoint.
* Experience in training or providing guidance to electronic assembly operators.
* Experience using SAP.
* Certified on IPC -A-610, IPC - WHMA-A-620 & IPC J-STD-001.
* Experience working in Aerospace and Defense industries.
* Experience or knowledge of 5-S, Lean Six Sigma work environments.
In compliance with pay transparency requirements, the salary range for this role is $52,500.00- $122,500.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
#LI-RT1
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English ( ) or Spanish ( ) . For information regarding your Right To Work, please click here for English ( ) or Spanish ( ) .
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Sr Spec, Production Planner (Operations Program Manager)
Job Code: 33360
Job Location: Camden, NJ (On-site)
Schedule: 9/80 Regular (Every Other Friday off)
L3Harris is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
Job Description:
We are currently seeking an Operations Program Manager to join our team in Camden, New Jersey. This position plans, schedules, coordinates and/or monitors products through the complete production cycle of mature production program units to meet requirements. Advises operations and program management of the status of work in progress & risks to meeting internal master schedule. Effective collaboration and coordination with manufacturing assemblers/technicians, material management, product line managers and quality are critical to the role.
Essential Functions:
* Coordinates with Manufacturing Engineering and Material Management to develop internal master schedule for assigned programs
* Releases work orders to production floor based on internal master schedule, part availability and current capacity
* Monitors manufacturing conformance to master schedule using ERP (SAP) systems and reports. Expedites needed make items based on master schedule
* Directly oversees operational measures including but not limited to efficiency, floor inventory accuracy, release on time and on time delivery. Reports variances and action plans to address.
* Manages and controls manufacturing floor stock for assigned programs
* Advises management of the status of work in progress, material availability, and potential production problems to ensure that personnel, equipment, materials, and services are provided as needed
* Coordinates scheduling of shared equipment and personnel with respective process owners
* Works under general supervision.
* May be responsible for entire projects or processes within job area.
* May be responsible for providing guidance, coaching and training to other employees within job area.
* May manage projects at this level with responsibility for the delegation of work and the review of others' work
Qualifications:
* Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience.
* Requires strong knowledge of job area. Typically viewed as having a specialty within discipline. May have broad knowledge of project management.
* Previous Planning and / or New Product Introduction experience
* Experience in an electronics production manufacturing environment either as a production planner, master scheduler, demand planner, and/or supply planner.
* Ability to effectively present information and respond to questions from management peers and subordinates.
* Experience using an ERP system with MRP & MPS capabilities.
* Understanding of capacity planning and theory of constraints
* This position will require the individual to be a U.S. citizen and ability to obtain and maintain a security clearance.
Preferred Additional Skills:
* Knowledge of SAP S4/Hana preferred.
* APICS Certification preferred
* Lean Manufacturing Certification / Training preferred
* Must possess strong results and goal/deadline-oriented work ethic, high attention to detail and be flexible.
* Excellent organizational skills, with the ability to develop and bring to completion multiple assignments concurrently.
* Strong Microsoft Office skills, highly proficient in Excel (e.g., Excel formulas, V-lookups, pivot tables) and has skill in preparing tables, graphs, and charts.
In compliance with pay transparency requirements, the salary range for this role is $77,500 - $144,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
#LI-IK1
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English ( ) or Spanish ( ) . For information regarding your Right To Work, please click here for English ( ) or Spanish ( ) .
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
#LI-KG1
Job Title: Manufacturing Quality Engineer
Job Location: Camden, NJ
Schedule: 9/80
Job Description:
We are seeking a highly motivated Quality Engineer (QE) to join our Quality team. This role is responsible for ensuring that supplied materials and components meet internal and external requirements for quality and compliance. The ideal candidate will have hands-on experience with SAP, a strong understanding of outbound logistics and shelf life labeling, and a working knowledge of aerospace quality clauses and industry standards.
Essential Functions:
* Lead quality assurance activities from onboarding through lifecycle support.
* Perform audits, assessments, and root cause investigations for non-conformances.
* Collaborate with suppliers to ensure compliance with customer quality clauses and AS9100/ISO9001 standards.
* Review and validate shelf life labels, certifications, and documentation for outbound shipments.
* Monitor performance and implement corrective actions using 8D, 5-Whys, or similar tools.
* Utilize SAP to manage supplier data, track inspections, and process quality notifications.
* Coordinate with purchasing, logistics, and engineering teams to resolve supply chain quality issues.
Qualifications:
* 3+ years of experience in a Supplier Quality, Manufacturing Quality, or related role in the aerospace or defense industry.
* Proficiency in SAP for quality and supply chain processes.
* Familiarity with outbound logistics, labeling requirements, reviewing CoC's, and shelf life management.
* Strong understanding of aerospace quality clauses, contracts, and regulatory requirements (e.g., FAA, EASA, DoD).
* Excellent communication, organizational, and problem-solving skills.
* ASQ Certified Quality Engineer (CQE) or similar certification is a plus.
In compliance with pay transparency requirements, the salary range for this role is $51,132.00-128,970.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English ( ) or Spanish ( ) . For information regarding your Right To Work, please click here for English ( ) or Spanish ( ) .
Pre-employment drug testing (EOE)
Great Benefits offered!
Project Manager, Greater Philadelphia Region
US-PA-Philadelphia
Job ID: 2025-2668
Type: Regular Full-Time
Category: Engineering
Haines & Kibblehouse, Inc.
Overview
H&K Group, Inc., is looking for an experienced Project Manager to support public and private projects in the Greater Philadelphia Region! The Project Manager plans, directs, and coordinates project activities to ensure goals of project are accomplished within the prescribed time frame and funding parameters. The ideal candidate is detail oriented, a team player, and a creative problem solver.
Why work for H&K Group, Inc.?
- Competitive salary commensurate with experience
- 100% Company-paid Health Benefits
- 401(k) Savings and Investment Plan
- Company vehicle after 90-day probationary period
- Tuition reimbursement programs available to qualifying employees for approved programs
- Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more
Responsibilities
Essential Duties and Responsibilities
- Performs all work according to OSHA and H&K Safety policies
- Maintain up-to-date project progress information and cost of labor and material data for project control and analysis
- Create and update at least monthly the overall schedule. Review schedules with the superintendent for each project including the required timetables for work performed by subcontractors
- Work as a team with assigned foreman and superintendent to build project in a controlled manner. Manage and coordinate with subcontractor
- Coordinate with purchasing the requisition of materials and furnish information for proper coding of invoices
- Provide modifications resulting in change orders
- Shares with the Estimator in the processing of plan revisions for change orders and distribute as required
- Process Additional Work Authorizations (AWA’s) for change order submission
- Coordinate and process change orders or technical problems with client requirements, suppliers, superintendents, and subcontractors
- Review project cost reports each day
- Visit project sites for troubleshooting and for the purposes of ensuring project quality. Site visits to be at least once a week
- Oversee project security and safety
- Prepare project AIA Billing requisitions with project secretary
- Review all purchase orders, delivery tickets, subcontractor requisitions, and invoices to see that they are coded correctly for project costing
- Maintain all project files: submittals, shop drawings, maintenance manuals, as-built drawings, punch lists
- Occasionally meet with all subcontractors/suppliers for project coordination
- Maintain a log for all submittals and shop drawings
- Assist with new project transitions and pre-job planning
- Chair all project meetings
- Meet or exceed project objectives as determined in the pre-job planning process
- Provide accurate percent complete status on projects to accounting each month
- Conduct a thorough analysis of job costs vs. budget each month
- Report to top management each month on gross margin improvement strategies and accomplishments
- Other duties as assigned
Qualifications
Required Skills, Education, and Experience
- Bachelor’s degree in civil engineering or relevant field from an accredited four-year college or university
- A combination of education and experience may be considered
- Five years of experience in Heavy Civil Constriction relevant to this region
- Driver’s license and clean driving record
- Effective verbal and written communication
- Proficient computer skills including internet and Microsoft Office (Outlook, Word, Excel) and specialized project software
- Ability to fit test & utilize appropriate PPE as needed
- Ability to meet physical requirements (movement, lifting, as relevant to job)
Preferred Skills, Education, and Experience
- Ten years of experience in Heavy Civil Constriction relevant to this region
- Certified PE
- OSHA and/or other applicable safety certifications and training
Physical Demands
- Regularly required to:
- Sit
- Use hands to finder, handle or fell
- Talk or hear
- Occasionally required to:
- Stand, walk, stoop, kneel, crouch, crawl
- Reach with hands and arms
- Lift and/or move up to 10 pounds
- Specific vision abilities:
- Close
- Color
- Ability to adjust focus
Work Environment
- Regularly required to drive
- Occasionally exposed to outside weather conditions
- Noise level is usually moderate
- Regularly exceeds 40 hours/week
The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years.
Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K’s strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference.
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans’ status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team.
Pre-employment drug testing (EOE)
Pre-employment Physical
100% Company-Paid Health Benefits!
PI610e3af78ba4-37156-37371252
Senior FPGA Engineer
Delta Information Systems is seeking a hands-on Senior FPGA Engineer with strong RF communications and DSP experience under our GDP division to design and develop real-world aerospace telemetry hardware.
Job Overview
This role focuses on FPGA/DSP design for RF receivers, taking designs from MATLAB modeling through FPGA implementation, board bring-up, and system integration. You’ll work on mission-critical products used in flight test, missile test, range safety, and space applications.
This is a hardware focused engineering role, not a software only position. Candidates should have hands-on FPGA and board-level experience.
This is an onsite position located in Horsham, PA. Hybrid option may be considered. No employer visa sponsorship is available.
Responsibilities
- FPGA/DSP design and debug for telemetry RF receivers
- VHDL-based FPGA design, simulation, and verification
- MATLAB modeling to support DSP and system architecture
- Board-level development, PCB oversight, and lab bring-up
- Integration of embedded CPU and FPGA designs
- Cross-functional collaboration with engineering and marketing
- Documentation: requirements, test plans, design reviews
- Jira-based issue tracking and design reviews
Qualifications
- BS in Electrical Engineering
- 5+ years in DSP-based product development
- Hands-on FPGA design experience (VHDL)
- RF receiver signal processing experience
- Familiarity with modulation schemes (PCM/FM, SOQPSK)
- Familiarity with FEC techniques (LDPC, Viterbi)
- FPGA simulation + MATLAB experience
- Lab experience with test equipment
- Embedded C/C++ a plus
- U.S. Persons Only (ITAR/EAR)
This position may require exposure to information, which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be “U.S. persons” within the meaning of U.S. regulations.
Compensation
- Salary Range: $135,000-$165,000 (based on experience)
- 100% PAID COVERAGE for Medical, Dental, and Vision for the Employee and Dependents
- 401(k) Employer Match
- Employee Stock Ownership Program (company funded)
- Life Insurance (company funded)
- Short-Term Disability (company funded)
- Long-Term Disability (company funded)
- 80 hours (Vacation)
- 40 hours (Sick Leave)
- 11 days (Paid Holidays
- HealthCare FSA
- Dependent Care FSA
What We Offer
- Opportunities for training, certifications, and career growth.
- A mission-driven culture where your work contributes to national security.
- Exposure to advanced technologies and programs critical to the aerospace and defense sector.
Why Join Delta
- 50+ years in aerospace telemetry
- Engineers own designs end-to-end
- Small, experienced team with minimal bureaucracy
- Hardware that ships, flies, and is used in the field
About Delta Information Systems, Inc.®
Delta Information Systems (DIS) is an industry-leading supplier of high-quality aerospace telemetry products for Flight Test, Missile Test, Range Safety, Launch Support and Satellite Command and Control applications. Their products address the complete telemetry chain from Data Acquisition, Storage, Transport and Distribution to Telemetry Processing and Display. DIS customers include all DoD entities, all Major Primes, Integrators, Gov Labs, Aircraft & Missile Manufacturers, & Launch Facilities.
In addition, Delta Information Systems (DIS) designs and develops sophisticated electronic equipment that is specifically designed to reliably operate in harsh environments. They deliver critical video communications capability for manned and unmanned Intelligence, Surveillance and Reconnaissance (ISR) programs.
About Precis
Precis Engineering + Architecture (Precis) is a 150+ person consulting firm with offices in Ambler, Pa., and Cary, N.C., offering comprehensive design services. Precis has been repeatedly recognized as a Best Place to Work by the Philadelphia Business Journal.
Position Overview:
The Automation Engineer supports the Ambler, Pa., office with 3 years or more of experience in the design and implementation of industrial automation systems for the pharmaceutical + biotechnology, chemical, and/or building systems markets. This individual must have a strong engineering background and an understanding of instrumentation, control, and automation systems hardware and software design, testing, and implementation. Experience in Allen Bradley PLCs, Siemens Building Automation Systems, and/or the DeltaV DCS platform is preferred.
The individual will be resourceful and goal-oriented, desiring challenging work in a dynamic environment. The individual will be responsible for generating automation-related project deliverables such as P&IDs, loop sheets, control panel designs, instrument specifications, software specifications, testing protocols, and corresponding narratives and reports.
Key Responsibilities:
- Knowledge in design and implementation for process, utility, and building automation systems.
- Experience with major automation system vendors including Allen Bradley, Siemens, Honeywell, ABB, and Emerson.
- Familiarity of systems integration technologies and approaches.
- Experience in automation system implementation/migration projects and upgrades required.
- Knowledge of cGxP requirements as they relate to automation systems preferred.
- Present automation system designs at client meetings.
- Interface with third-party control system vendors.
- Develop new clients, maintain and expand the relationship and scope of work with existing clients.
Competencies
- Automation systems hardware and software
- Industrial and process instrumentation
- Strategic thinking, problem solving, and analysis
- Customer/client focus
- Communication proficiency
- Time management
Qualifications
- B.S. in Chemical, Electrical, or Mechanical Engineering or related major required.
- Minimum of 3 years of experience in the field.
- The ability to work well with others, lead a team, and manage in matrix teams and environments with multiple clients.
- Experience in automation systems design and implementation.
- Experience in industrial and process instrumentation types, technologies, and specification.
- Effective presentation, written, and verbal communication skills.
- Excellent organizational, planning, and time management skills.
- Logical thinking with creative problem-solving skills.
- Familiar with a variety of the field's concepts, practices, and procedures.
Why Join Precis?
- Be part of a collaborative, innovative team that values your ideas and expertise.
- Shape growth for a respected, specialized engineering and architecture firm.
- Enjoy a flexible, supportive work environment and competitive compensation package.
Equal Opportunity Employer
Precis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics.
Overview & Purpose
Precis Engineering is seeking a mid-level Process Utilities Engineer with 5 years or more of experience focusing on the design and implementation of Clean Utility Systems (WFI generation and purified water systems) and Equipment Cleaning in Place (CIP) systems for the pharmaceutical, biotechnology, and/or chemical industries. This individual must have a strong engineering background and a thorough understanding of equipment design, CIP design, US Pharmacopia and BPE standards.
The individual will be resourceful and goal-oriented, desiring challenging work in a dynamic environment. Process is a young business endeavor for Precis and this individual will have an entrepreneurial and strategic mindset towards the long-term growth and viability of the group. He/she will be comfortable in a process execution role as well as representing the process discipline as a technical resource on larger, multi-discipline project teams. The individual will work be responsible for generating process-related project deliverables such as P&IDs, utility diversity calculations, user requirements, equipment specifications, piping design, and corresponding narratives/reports.
Responsibilities
- Responsible for execution and coordination of multi-discipline engineering teams for process projects comprised of Precis, client, and third-party personnel.
- Work in conjunction with a subject matter expert in design and implementation for process and clean utilities for pharmaceutical manufacturing clients.
- Experience with major clean utility and Cleaning equipment manufacturers.
- Prepare and review systems calculations, drawings, and specifications.
- Familiarity of instrumentation and automation and control approaches.
- Knowledge of cGMP requirements with respect to operations and manufacturing facility design.
- Ability to communicate and articulate process design deliverables and convey the project needs to complete construction drawing deliverables to clients and partners/
- Be able to manage work to a budget and schedule and report status to project oversight.
Qualifications
- B.S. in Chemical Engineering or related major required.
- Minimum of 5 years of experience in the field.
- The ability to work well with others, lead a team and manage in matrix teams and environments with multiple clients.
- Experience in process utility design and implementation.
- Experience in process deliverables such as Process Flow Diagrams, P&IDs, piping drawings and equipment specifications.
- Experience with AutoCAD and Revit drafting software.
- Delegation negotiating, and team skills.
- Effective presentation, written and verbal communication skills.
- Excellent organizational, planning, and time management skills.
- Logical thinking with creative problem solving skills.
- Understanding of budget control.
- Familiar with a variety of the field's concepts, practices, and procedures.
Competencies
- Process Engineering with a Focus on Process Utilities & CIP Equipment
- Specification of Process Equipment and Instrumentation
- Strategic Thinking/Problem Solving/Analysis
- Customer/Client Focus
- Communication Proficiency
- Time Management
Education / Licenses
- BS degree in Chemical Engineering or related
- Professional Engineer (PE) License, or FE Preferred
AGE Solutions is a premier technology and professional services company, providing in-depth consulting, advanced technology solutions, and essential services throughout the U.S. government, defense, and intelligence sectors. Prioritizing innovation and client-focused solutions, we assist major agencies in addressing intricate issues and ensuring a more secure future.
AGE Solutions is seeking an Audio-Visual Command Meeting (AVCM) Engineer. In this role, you will travel within their assigned zone to support Senior Executive Services (SES) and Military Officer conference and meeting spaces. This role provides installation, troubleshooting, and sustainment support for enterprise audio-visual systems and will augment support to other zones as required. The ideal candidate is a hands-on AV professional with strong technical expertise, the ability to lead AV efforts on-site, and experience working in classified environments.
This position is based out of Philadelphia, PA with regional CONUS travel.
Key Responsibilities:
- Travel within assigned zone and provide augmentation support to other zones as needed
- Support SES and Military Officer conference and meeting spaces
- Install, pull, terminate, label, and test all AV-related cables, connectors, and interfaces
- Install projection screens, plasma/LED displays, speakers, and related AV hardware
- Perform installation of AV systems at client sites, including full room deployments
- Read and interpret blueprints, drawings, and technical documentation
- Wire and build AV racks to standard and customer specifications
- Serve as the Lead Audio Visual Engineer on projects and customer engagements
- Manage AV projects across various models and makes of equipment
- Conduct testing, analysis, troubleshooting, and corrective actions on systems, networks, hardware, and software
- Demonstrate thorough understanding of AV wiring standards and connector types across AV cable types
- Support internet-based video solutions including switchers, codecs, interfaces, and room design solutions
- Access classified areas to support Enterprise JWICS installation and troubleshooting of system hardware (user account not required)
Required Qualifications:
- Five (5) years of relevant experience with AV engineering
- Have an active DoD Secret clearance at a minimum
- Have one (1) of the following certifications:
- AMX Technician (Networked AV) Certification, or
- Crestron CTI Technician Track Certification, or
- AVIXA CTS Certification
- Ability to support mission-critical AV/VTC systems under pressure
- Demonstrated experience working with:
- Crestron
- Cisco
- Biamp / AMX
- Extron
- Willingness to travel throughout the zone as required
- Strong troubleshooting skills to quickly diagnose and restore AV/VTC services
- Ability to follow escalation procedures and provide status updates and corrective action plans to leadership/PMO
- Experience using a ticketing system (e.g., ServiceNow) to document troubleshooting, actions taken, and resolution details
- Ability to provide routine ticket updates until closure and document root cause and resolution steps
- Ability to provide daily operational status reporting for non-operational rooms, including estimated restoration timelines
- Location: This position is onsite at our customer's location in Philadelphia, PA and requires up to 50% travel (CONUS).
Compensation: $70,000+
At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.
- 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
- Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
- 401(k) with Match: We match 3% of your contributions with immediate vesting.
- Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
- Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
- Parental Leave: 15 days of fully paid leave for new parents, because family matters.
- Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
- Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
- Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
At AGE, you'll do work that matters, supported by a company that delivers for its people.
