Engineering Jobs in Pitman, NJ

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio.  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.

The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet.

• Diagnostics & Repair

  • Independently diagnose and repair:
    • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components).
    • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines.
    • Air and hydraulic brake systems, ABS, and suspension components.
    • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing).
    • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting.

   

  Preventive Maintenance & Compliance

  • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented.
  • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis.
  • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues.

   

  Road Calls & Operational Support

  • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed.
  • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times.

   

  Mentorship, Training & Documentation

  • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods.
  • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used.
  • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization.

• High school diploma or GED required.
• 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement.
• Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT.
• Demonstrated proficiency with hydraulic, pneumatic, and electrical systems.
• Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics.
• Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred.
• ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred.
• Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred.
• Familiarity with computerized fleet maintenance and parts inventory systems preferred.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. 

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.  

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. 

Position: Engineering Manager

Location: Camden County, NJ

Position Summary

The Engineering Manager is responsible for leading a team of engineers and technical personnel who support the ongoing performance, reliability, and continuous improvement of existing manufacturing operations. This role ensures that production systems, processes, and products operate efficiently while driving initiatives related to cost reduction, product performance improvements, and operational excellence.

• The manager will serve as the primary engineering liaison to production, collaborating closely with operations, quality, supply chain, and product development teams to resolve technical challenges and implement process improvements. This is a hands-on leadership role suited for an individual who thrives in a fast-paced manufacturing environment and is passionate about improving processes, quality, and product performance.

Key Responsibilities

Team Leadership

• Lead, mentor, and develop a team of engineers and technical staff responsible for supporting existing manufacturing operations.
• Foster collaboration between engineering, operations, and quality teams to drive operational excellence initiatives.
• Establish clear priorities and ensure engineering resources are effectively aligned with production needs.

Manufacturing & Production Support

• Serve as the primary engineering point-of-contact for manufacturing operations.
• Provide technical guidance and troubleshooting support to maximize production uptime and efficiency.
• Maintain accurate engineering definitions including bills of materials (BOMs), standard operating procedures (SOPs), drawings, and process specifications.
• Lead engineering projects focused on product performance improvements, cost reduction, and reliability enhancements.

Quality & Root Cause Analysis

• Partner with the Quality team to investigate production or field failures.
• Lead root cause analysis and implement corrective and preventive actions.
• Support quality initiatives aimed at improving product reliability and manufacturing consistency.

Engineering Change Management

• Manage and oversee the Engineering Change Order (ECO) process from initiation through implementation.
• Ensure engineering and quality documentation remains accurate and up to date.
• Coordinate cross-functional communication during product or process changes.

Process Improvement & Lean Initiatives

• Drive continuous improvement initiatives using Lean manufacturing and statistical problem-solving methodologies.
• Identify opportunities to improve assembly processes, reduce waste, and optimize workflow.
• Support preventative maintenance initiatives and long-term equipment reliability.

Cross-Functional Collaboration

• Work closely with R&D, operations, supply chain, and customer support teams to support product lifecycle management.
• Assist supply chain teams with evaluation of alternate components or suppliers to mitigate supply risks.
• Ensure alignment between engineering initiatives and broader operational goals.

Qualifications

• Bachelor's degree in Mechanical Engineering, Industrial Engineering, Electrical Engineering, or a related technical discipline.
• 10 years of engineering experience within a manufacturing environment.
• Minimum of 5 years of leadership or management experience.
• Experience supporting manufacturing operations in a sustaining or production engineering capacity.
• Strong knowledge of Lean manufacturing principles and structured problem-solving methods.
• Experience with 3D CAD tools such as SolidWorks and the ability to interpret technical drawings.
• Familiarity with Engineering Change Orders (ECO) or Engineering Change Notices (ECN).
• Excellent leadership, communication, and organizational skills.
• Strong mechanical aptitude and the ability to solve complex technical issues in a fast-paced environment.

• Competitive salary
• Lead maintenance operations in a high-volume manufacturing facility
• Opportunity to drive reliability improvements and reduce downtime
• Work in a collaborative, unionized production environment
• Influence plant performance across safety, quality, delivery, and cost
  
  

• Lead and coach maintenance technicians to ensure safe, efficient operations
• Drive preventive and predictive maintenance programs to maximize equipment uptime
• Monitor asset performance and analyze reliability data to prevent failures
• Coordinate maintenance schedules with operations, sanitation, and engineering teams
• Ensure compliance with safety, food safety, and GMP standards
• Track maintenance activities and asset history using CMMS/EAM systems
• Develop action plans to reduce downtime, waste, and equipment failures
• Participate in plant performance meetings and implement follow-up improvements
  
  

• Be able to do the job as described
• Strong understanding of reliability fundamentals such as root cause failure analysis and downtime analysis
• Experience using CMMS/EAM systems to track asset performance and maintenance planning
• Knowledge of HACCP, food safety, and GMP standards within a manufacturing environment
• Familiarity with condition-based monitoring tools and predictive maintenance processes
  
  

• Support without hesitation General Plant Safety, Food Safety, Food Defense Initiatives and Good Manufacturing Practices with an understanding that these are absolutes and are Priority #1.
• Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job.
• Fabricate, weld, and assemble stainless steel components used in bakery production equipment, conveyors, racks, and support structures.
• Perform TIG, MIG, and stick welding on stainless steel, mild steel, and aluminum materials.
• Repair damaged bakery equipment, including mixers, conveyors, ovens, pans, racks, and piping using cutting, burning, and welding techniques and equipment.
• Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage.
• Modify existing equipment to improve production efficiency or meet operational requirements.
• Prepares, assembles, and tacks weld parts and surfaces to be welded.
• Interpret blueprints, schematics, and fabrication drawings to complete projects accurately.
• Ensure all fabricated equipment meets food safety and sanitary welding standards for food manufacturing.
• Grind, polish, and finish welds to maintain hygienic surfaces suitable for food production.
• Work closely with the maintenance and engineering teams to support plant projects and equipment upgrades.
• Maintain welding equipment, tools, and fabrication shop area.
• Follow OSHA safety regulations and food safety policies (GMPs).
• Assist with installation of new bakery equipment and production lines.
• Notifies supervisor when faulty equipment or defective materials are discovered.
• Performs other related duties as assigned.
  
  

• Strong knowledge and experience in TIG welding as well as MIG welding.
• Thorough understanding of machines and tools used in welding including but not limited to designs, uses, maintenance and repair.
• Must have knowledge, experience and ability to weld steel, aluminum and stainless-steel using Arc, Tig, and Mig welding methods.
• Knowledge of metal cutting, grinding, and finishing
• Knowledge of fabrication layouts and measurements
• Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints.
• Excellent ability to read and listen to assignments given in a variety of forms.
• Basic understanding of mathematics as it relates to welding assignments.
• Mechanical aptitude
• Ability to Problem-solve and troubleshoot equipment.
  
  

• High school diploma or GED required.
• Completion of a formal apprenticeship in welding or metal fabrication.
• Minimum 2–5 years welding/fabrication experience, preferably in food manufacturing, bakery, or industrial environments.
• Experience with stainless steel sanitary welding is strongly preferred.
• Ability to read and interpret technical drawings and blueprints.
• Knowledge of GMP, food safety, and sanitary design standards.
• Must be able to weld components that are vertical, flat, or overhead.
• Must have enough manual dexterity and stability as required for precision work.
• Must be able to see details at close range.
• Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials.
• May require working nights, weekends, or overtime depending on production needs.
  
  

• Repair and maintain machinery and equipment in accordance with diagrams, operational manuals and manufacturing specifications
• Direct mechanic helpers engaged in repairing and maintaining parts of machinery and equipment
• Diagnosing malfunctions in equipment and machinery based on observation of machinery and applying knowledge from experience.
• Follow operation manuals, manufacturer’s instructions and engineering specifications
• Perform preventive maintenance functions as directed
• Must be able to work well with all levels of personnel whether individually or in a team environment, and especially must be able to interface and communicate with line operators to assist with repairs and troubleshooting
• Installs, starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown in line with OSHA requirements.
• Informs appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved.
• Interpret specifications, blueprints and job orders to workers
• Anticipate potential problem areas and delegate course of action to be taken
• Know where emergency STOP, and START/STOP buttons are located
• Responsible for following all Lock Out/Tag Out procedures for machine when necessary
• Must be safety conscious
• Maintain a safe and clean working environment by complying with procedures, rules and regulations
• Complete a Food Safety Incident Report if an incident occurs
• Follow all company GMP procedures.
• Support without hesitation General Plant Safety, Food Safety, Food Defense Initiatives and Good Manufacturing Practices with an understanding that these are absolutes and are Priority #1.
• Willing to work any shift and overtime as required
• Perform all special requests by Lead Mechanic/Maintenance Supervisor/ Maintenance Manager
  
  

Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor.

Job Summary:

This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports.

Responsibilities:

Accident prevention actively identify, correct and/or report safety hazards to prevent accidents.

Actively identify and pursue cost reduction and efficiency/profit improvement opportunities.

Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product.

Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff.

Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications.

Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials.

Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests.

Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications.

Determines acceptability or rework by conducting inspections and physical tests of reworked product.

Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based.

Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes.

Contributes to team effort by accomplishing related results as needed.

Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator

Performs other duties as assigned

Must be able to fulfill essential job function in a consistent state of alertness and safe manner.

Why work for Sea Box?

We offer benefits to our full-time employees that include:

• Health Insurance
• Dental Insurance
• Vision Insurance
• Basic and Voluntary Life
• Long-Term Disability
• Flexible Spending Accounts
• Employee Assistance Program
• Paid Time Off
• Paid Holidays, Bereavement, Jury Duty
• 401(k) with company match
• Employee Referral Program

Employees are eligible for most benefits on the 1st of the month following date of hire.

Salary Range: $45,000 - $60,000

Location: This position is onsite (non-remote) at the Companys corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Companys normal 8:30am 5:30pm hours of operation.

Experience: 3-5 years work related experience.

Education: High school diploma or equivalent. ASQ or AWS Certifications helpful.

PI62a13e37c857-26289-39975106

Company Description

John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies.

We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards.

John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries.

Job Description

Under general supervision, the Seal Repair Technician is responsible for all processes related to disassembly and assembly of rotating equipment. The Seal Repair Technician follows instruction from a Repair job packet and router to perform DCI (Dismantle Clean and Inspect) and gives a written description of the wear and condition of critical components seal.

This position completes all inspection forms taking pictures of all critical components and uses inspection equipment for proper documentation of the assembly. With assistance identifies, inspects and evaluates material returned, determines repair operations, performs simple shop operations, verify specifications, initiate work and purchase orders.

Receives John Crane parts and materials returned by customers and branch offices. Evaluates from a condition of material, checks current drawing revisions and general product knowledge whether material is repairable or non-repairable.

• Identifies and inspects material returned.
• Ensures all components are properly cleaned and free from foreign material per departmental procedures
• Performs the assembly of the seal once the repair has been released to the shop and all components have been replaced or reconditioned and marked ready for assembly.
• Under close supervision, repairs returned seals and seal parts.
• May perform parts structuring, checks cost structure, and determines price of repair, ensures assembly is structured correctly, and price repair.
• Determines necessary repair operations, ensures BOM (bill of materials) / drawings / repair parts match.
• Performs simple operations on drill press (single spindle), tool post grinder, bead blast polisher and lapping machine.
• Verifies part specifications with measuring instruments such as micrometer, vernier caliper, dial indicator and optical flats.
• May initiates purchase orders for new jobs if vendors are involved.
• Consults with Engineering or Sales departments as necessary.
• Maintains necessary records and small inventory of seal parts used for repair orders.
• Works from factory work orders, prints, rework orders and verbal instructions.
• Assists newer repair personnel as necessary.
• Sets up and troubleshoots lapping machines for repair maintenance.
• May perform direct contact with customers on service and/or phone, checks computer system for credit and address information, price repairs

Qualifications

• High School Diploma or equivalent.
• Experience in mechanical assembly positions
• Experience with mechanical seals is a plus

#Smiths

Additional Information

With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Network, and Neurodiversity.

• Strategic Leadership:
  • Able to define a vision for a site of approximately 200 staff members, including the development of a 3 to 5 year operating plan
  • Prior experience managing responsibility of the P&L and balance sheet for a manufacturing site.
  • Deliver annual revenue, profit, EBITDA, and cash targets through effective P&L management.
  • Execute capital projects on average of +$10M to ensure facilities, equipment, and systems meet production demand and compliance requirements.
  • Develop and execute site master plan which includes building talent capabilities that results in the site meeting branded large pharma industry standards to facilitate new business.
• Regulatory & Compliance:
  • Ensure strict adherence to cGMP, FDA, and DEA regulations for controlled substances.
  • Maintain FDA audit readiness and compliance with OSHA, EPA, DEA and other regulatory agencies.
• Process Excellence & Operational Performance:
  • Drive process improvement initiatives, lean manufacturing, and digital transformation to optimize throughput and reduce costs.
  • Assess site operations and drive execution of cost reduction initiatives to improve productivity and profitability of products
  • Implement best practices for manufacturing
  • Deep understanding in Process Safety Management, Environmental understanding, including wastewater treatment plant operations and security programs.
  • Oversee ERP and compliance systems (including D365) for operational efficiency.
• Commercial & Customer Focus:
  • Partner with Commercial teams to define and execute strategies for revenue growth and customer satisfaction.
  • Ensure timely delivery of products in compliance with regulatory requirements.
• People Leadership:
  • Recruit, develop, and retain high-caliber talent through succession planning and performance management.
  • Demonstrates deep understanding on cultural transformation
  • Foster a culture of engagement, accountability, and continuous improvement.
• Business Development:
  • Enable the site to deliver late -phase/commercial CDMO programs that include the acquisition of new customers, tech transfer and scale up production.
  • Participate in strategic initiatives including market expansion, technology alliances, and evaluation of new products.
  • Support acquisition and rationalization activities as needed.
    
    

• Bachelor’s degree in Chemical Engineering, Chemistry, Pharmaceutical Sciences, or related field (advanced degree preferred).
  
  

• 15+ years in API small molecules pharmaceutical manufacturing leadership roles, with proven expertise in cGMP, FDA, and DEA compliance for APIs and controlled substances.
• Proven experience in generics manufacturing with knowledge and capabilities to meet big pharma branded business.
• Demonstrated success in operational turnarounds, quality remediations, or start-up of manufacturing facilities.
• Strong background in process optimization and continuous improvement methodologies.
  
  

• Exceptional leadership, communication, and change management skills.
• Detail oriented, advance analytical capabilities and high learning agility
• Ability to manage complex operations and deliver results in a dynamic environment.
• Understanding transactional process improvements
• Understand how to develop and implement operating mechanism and meeting structure to manage operations at the site, including the definition and implementation of KPIs and tier meetings.
  
  

• Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies.
• Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs.
• Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs.
• Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you do not meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team.
  
  

Position Description

Ryder is hiring a Senior Level Diesel Technician in Woolwich Township, New Jersey — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $30.50 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 2:30 pm – 11:00 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominique or text “Woolwich Township” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Basic diagnostics and repairs, including AC and electrical systems, required
  
  
• Three (3) years or more relevant work experience, preferred
  
  
• All other certification as required by location, required
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  
• ADDITIONAL REQUIREMENTS:
  
  
• Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties including:
  
  
• Performs standard vehicle maintenance
  
  
• Performs preventive maintenance
  
  
• Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable
  
  
• Completes complex and detailed mechanical inspections & repairs with minimal supervision
  
  
• Replaces defective components as instructed
  
  
• Works unsupervised on most tasks
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
  
  
• Utilizes key functions of Shop Management System and electronic documentation available.
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT).
  
  
• Acts as mentor for Tech 1 and Tech 2 levels.
  
  
• Demonstrate the ability to access and use internal and external maintenance documents.
  
  
• Other support duties as required to support operations. These could include but are not limited to Service Island support
  
  
• SBTIII trained within 180 days (SBT220)
  
  
• Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days)
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 week ago (3/11/2026 1:05 PM)

Requisition ID 2

Location (Posting Location) : State/Province NJ

Location (Posting Location) : City WOOLWICH TOWNSHIP

Location (Posting Location) : Postal Code 08085

Category Technicians/Service Employees5

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000356

Min Pay USD $30.50/Hr.

Max Pay USD $30.50/Hr.

• Professionally and systematically defines, designs, develops, monitors, and refines an asset maintenance plan that includes:
  • Value-added preventive maintenance tasks for new and existing equipment.
  • Effective utilization of predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems.
• Develops and provides input to a risk management plan that will anticipate reliability-related and non-reliability related risks that could adversely impact plant operations.
• Participates in the development of criteria for and evaluation of equipment and technical MRO suppliers and technical maintenance service providers.
• Develops engineering solutions to repetitive failures and all other problems that adversely affect plant operations. These issues may include capacity, quality, cost or regulatory compliance issues. To fulfill this responsibility, the reliability engineer applies data analysis techniques that could include:
  • Reliability modeling and prediction
  • Fault tree analysis
  • Six Sigma methodology
  • Root cause analysis (RCA) and root cause failure analysis (RCFA)
  • Failure reporting, analysis and corrective action system (FRACAS)
• Works with Production to perform analyses of assets including:
  • Asset utilization
  • Equipment effectiveness
  • Remaining useful life
  • Other parameters that define operating condition, reliability and costs of assets.
• Provides technical support to maintenance personnel.
• Participates in the development of design and installation specifications along with commissioning plans and participates in the final commissioning of new installations.
• Applies value analysis to repair/replace, repair/design and make/buy decisions.
• Carry out any other duties which are within the employee’s skills and abilities whenever reasonably instructed.
  
  

• BS/MS in Mechanical Engineering, Reliability Engineering, or equivalent degree.
• Minimum of 5 years of maintenance and reliability, production management, engineering or operations experience.
• Experience with and a thorough understanding of technical concepts, practices and procedures in bulk pharmaceutical manufacturing, and related support systems.
• Strong knowledge of preventive maintenance programs and the tools associated with failure detection (i.e. vibration analysis, oil monitoring and thermography) as well as the software associated with them.
• Working knowledge of Computerized Maintenance Management Systems.
• Experience working with Microsoft Office (Outlook, Word, Excel, Project, and Visio)
• Ability to read and understand repair manuals, specifications, drawings, and schematic diagrams.
• Excellent communication and interpersonal skills.
• Excellent organizational skills and detail oriented.
• Good technical writing skills
• Must be able to work independently with minimal supervision.
• Lean/Six Sigma experience.
  
  

• Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies.
• Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs.
• Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs.
• Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you don’t meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team.