Engineering Jobs in Patterson Putnam County Ny Remote
195 positions found
A
Certified Pipe Welder
✦ New
Salary not disclosed
POSITION SUMMARY:
The Pipe Welder will participate in the installation or maintenance and inspection of HVAC, Utility and Process piping systems.
POSITION RESPONSIBILITIES:
SKILLS & EXPERIENCE/REQUIREMENTS:
PHYSICAL DEMANDS & WORK ENVIRONMENT:
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
PHYSICAL DEMANDS:
Ability to perform tasks in all aspects of construction sites; ability to climb ladders and crawl as needed; ability to work from aerial lifts; ability to lift and manipulate objects of up to 50 lbs.
WORK ENVIRONMENT:
The Pipe Welder will participate in the installation or maintenance and inspection of HVAC, Utility and Process piping systems.
POSITION RESPONSIBILITIES:
- Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
- Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
- Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
- Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
- Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
- Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
- Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
- Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
- Fill holes, and increase the size of metal parts.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
- Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
- Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
- Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
- Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
- Mark or tag material with proper job number, piece marks, and other identifying marks as required.
- Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
- Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
- Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
- Preheat work pieces prior to welding or bending, using torches or heating furnaces.
- Hammer out bulges or bends in metal work pieces.
- Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
- Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
- Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
- Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
- Set up and use ladders and scaffolding as necessary to complete work.
- Use fire suppression methods in industrial emergencies.
- Detect faulty operation of equipment or defective materials and notify supervisors;
- Direct helpers or apprentices in appropriate tasks;
- Must maintain strict adherence to safety rules and quality;
- Participate in site housekeeping;
- Interact with co-workers in an attentive courteous manner;
- Additional duties as directed by management.
SKILLS & EXPERIENCE/REQUIREMENTS:
- Ability to work independently or as part of a team;
- Experience: 5 years of Field Experience, trade school or apprenticeship;
- Knowledge of materials, methods and tools involved in industrial construction;
- Attention to detail;
- Ability to keep hand and arm steady;
- Be highly focused on customer satisfaction expectations;
- Good documentation and record keeping;
- Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
- Competency in Permit Required Confined Space;
- Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
- Appropriate state certification or license;
- OSHA 10 certification.
PHYSICAL DEMANDS & WORK ENVIRONMENT:
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
PHYSICAL DEMANDS:
Ability to perform tasks in all aspects of construction sites; ability to climb ladders and crawl as needed; ability to work from aerial lifts; ability to lift and manipulate objects of up to 50 lbs.
WORK ENVIRONMENT:
- Industrial manufacturing facilities Power generating facilities
- Chemical manufacturing Healthcare & Institutional
- Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces
Not Specified
A
Manufacturing Engineering Intern
✦ New 🏢 Arcmed
Salary not disclosed
JOB SUMMARY
The Engineering Intern will have the opportunity to drive a Research & Development Project, to be decided by the Engineering Manager. The ideal candidate will think logically and enjoy solving problems with creativity, diligence, and achievement. Arcmed offers a great work environment, professional development, challenging careers, and competitive compensation packages.
Our Strategy and Purpose
- We provide technology and supply chain solutions for the design and manufacture of precise fluid handling components for diagnostic and analytical instruments.
- We improve patient outcomes by helping solve the world’s toughest diagnostic and analytical challenges.
- We will be the recognized leader in helping engineers, scientists, and doctors to solve the world’s toughest diagnostic and analytical challenges.
- We always act with intention and drive to achieve our purpose.
- Teamwork, collaboration, and diverse opinions make us stronger.
- We are unafraid to make timely decisions, and we empower our people to make decisions, execute them, and move forward.
- We value people and take the initiative and hold themselves accountable.
- Challenging the status quo helps us grow. Look for and call out improvements.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Modify and improve critical components and program PLC for draw down process upgrades.
- Collaborate with the manifold team to assist with design, programming, and fabrication of CNC-milled components for diffusion bonding.
- Study the existing products to gain an understanding of how Arcmed supports industry.
- Work with internal stakeholders to determine areas of improvement.
- Merge the functional intent of the product with various upgrades to create a project proposal.
- Drive project proposal to a Go/No-Go decision.
- Deliver final presentation to Board of Directors outlining project efforts, results, and lessons learned.
Health & Safety:
- Report and take required action regarding injuries, incidents, medical, and accidents required by policy.
- Make the health, safety, protection of rights, and the development of all employees your primary responsibilities.
- Effectively manage medical and first aid emergencies.
- Follow all agency safety/medical-related policies and procedures.
- Follow fire evacuation and disaster procedures correctly and on time.
- Report unsafe situations immediately; ensuring safety is imperative.
- Ensure pertinent emergency telephone numbers are readily available.
- Report symptoms and signs of communicable diseases immediately.
- Consistently use universal precautions.
- Report any incident that could potentially result in negative reactions from the community, law enforcement officers, and other agencies to the supervisor immediately.
EDUCATIONAL REQUIREMENTS, QUALIFICATIONS, and TRAININGS
- Currently enrolled in an Engineering program.
- Engineering degree, Mechanical or Electrical preferred.
- Recommended to be a Junior or Senior with experience in Product Design and Manufacturing.
- Interpersonal skills.
COMPUTER AND SOFTWARE REQUIREMENTS
- Microsoft: Office 365; SharePoint; Teams; Visio; and OneNote preferred.
- Experience with CAD software (preferably SolidWorks)
- Ability to operate media equipment such as tablets, smartphones, and other electronic equipment.
- Ability to work with general office equipment.
- Ability to work with and understand databases is a must, and the ability to learn technical skills.
PHYSICAL REQUIREMENTS & WORK ENVIRONMENT
- Shall have essential physical skills; be able to run, squat, stoop/bend, kneel, climb stairs, and lift at least 50 pounds (or ¼ own body weight).
- Shall have adequate vision, reading, writing, and documentation skills, and hearing to perform the essential functions of the job.
- Must have enough endurance to perform tasks over long periods of time.
- Will be engaged in speaking, sitting, walking, driving, listening, and in communicating both orally and in writing while performing his or her duties.
- Must be able to listen and respond to questions and instructions.
The qualifications, physical demands, and work environment described herein are representative of those an employee will encounter and must meet to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.
Arcmed is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.
This document does not create an employment contract, implied or otherwise, other than an "at will" relationship.
The above-noted job description is not intended to describe in detail the variety of tasks that may be assigned, but rather to give the incumbent a general sense of the responsibilities and expectations of their position. As the nature of business demands change, so, too, may the essential functions of this position.
internship
A
Key Account Sales Manager
🏢 Arcmed
Salary not disclosed
JOB SUMMARY *****MUST HAVE MANUFACTURING EXPERIENCE*****
The Key Account Manager is responsible for developing and sustaining strong, long-term relationships with key customers while ensuring their needs are fully understood and met. This role serves as a primary liaison between customers and internal teams, facilitating seamless communication, negotiating pricing and supply agreements, and resolving issues promptly and effectively. The Key Account Manager will identify and maximize sales opportunities, drive customer satisfaction, and support overall business growth. In addition, the role includes prospecting new customers in target markets and contributing to the achievement of the company’s strategic sales goals.
Our Strategy and Purpose
- We provide technology for the design and manufacture of precise fluid handling components for diagnostic and analytical instruments.
- We improve patient outcomes and help engineers, scientists, and doctors to solve the world’s toughest diagnostic and analytical challenges.
- We always act with intention and drive to achieve our purpose.
- Teamwork, collaboration, candor, and diverse opinions make us stronger.
- We are unafraid to make timely decisions, and we empower our people to make decisions, execute them, and move forward.
- We value people who take the initiative and hold themselves accountable.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Execute account-based sales plans to achieve revenue growth targets.
- Strengthen relationships with major customers, ensuring alignment with company strategy and compliance.
- Collaborate with internal teams to optimize inventory and balance service excellence with cost efficiency.
- Monitor performance using KPIs, pipeline reviews, and internal quarterly business reviews.
- Respond promptly to customer inquiries and resolve issues professionally.
- Partner with Engineering and Technical Sales to address product issues and deliver tailored solutions.
- Manage customer complaints and returns, prioritizing resolution and retention.
- Lead Customer Quarterly Business Reviews to gather customer insights and assess performance.
- Negotiate pricing, terms, and supply agreements within company guidelines.
- Pursue and generate new business opportunities through web leads, trade shows, and targeted outreach.
- Oversee new customer projects from concept to production, ensuring timely and successful launches.
- Work as directed by your manager.
- Approximately 50% travel
EDUCATIONAL REQUIREMENTS, QUALIFICIATIONS, and TRAININGS
- At least 5 years’ sales, account management or technical sales experience in a manufacturing company.
- Bachelor’s Degree or equivalent desired
- Strong attention to detail and organization skills required.
- Demonstrate ability to interact and cooperate with all company employees, and customers maintain professional relationships that meet company core values.
- Build trust, value others, communicate effectively, drive execution, foster innovation, focus on the customer, collaborate with others, solve problems creatively and demonstrate high integrity.
- Take a hands-on approach to finding solutions to problems.
- Excellent ability to communicate orally and in writing in English.
- Well-developed literacy, numeracy, and computer skills with a technical aptitude.
- Ability to work in a fast-paced environment where employees strive to meet challenging customer expectations.
COMPUTER AND SOFTWARE REQUIREMENTS
- Experience with Epicor ERP is a plus.
- Microsoft: Office 365; SharePoint; Teams; and OneNote preferred.
- Ability to operate media equipment such as tablets, smartphones, and other electronic equipment.
- Ability to work with general office equipment.
- Ability to work with and understand data is necessary and the ability to learn technical skills.
PHYSICAL REQUIREMENTS & WORK ENVIRONMENT
- Shall have adequate vision, reading, writing, and documentation skills, and hearing to perform the essential functions of the job.
- Must have enough endurance to perform tasks over extended periods of time.
- Will be engaged in speaking, sitting, walking, driving, listening, and in communicating both orally and in writing while performing his or her duties.
- Must be able to listen and respond to questions and instructions.
The qualifications, physical demands, and work environment described herein are representative of those an employee will encounter and must meet to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.
This document does not create an employment contract, implied or otherwise, other than an "at will" relationship.
Arcmed is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.
The above noted job description is not intended to describe, in detail, the variety of tasks that may be assigned but rather to give the incumbent a general sense of the responsibilities and expectations of his/her position. As the nature of business demands change, so, too, may the essential functions of this position.
Not Specified
P
R&D Chemistry Intern - AI Liquid Cooling Lab
Salary not disclosed
About PFX™
We engineer leading fluid solutions that keep the world moving and we’re building a better future while we do it. As a vertically integrated global powerhouse, we operate 17 manufacturing facilities and 4 R&D centers across the world, delivering performance from lab to road in over 40 countries.
PFX Group™ brings together a family of trusted companies including Recochem, Prestone, Adam’s Polishes, B&B Blending, Kost USA, Ultra Clear, POR and Auto-Chem, each with deep expertise, regional insight, and a shared commitment to engineering excellence.
From automotive and heavy-duty thermal management systems to household and industrial solutions, our products are built for performance, reliability, and a commitment to sustainability. Join us and be part of a team that’s redefining what’s possible in fluid technology.
Position Overview:
The AI Liquid Cooling Lab Intern will support the high visibility, high growth, data center liquid cooling business at PFX. Working alongside senior lab personnel, the role will develop technical solutions to enable effective thermal management of IT hardware used by hyperscale AI Factories leveraging an established background in organic chemistry, analytical chemistry, physical chemistry, or related discipline. In this role, the accepted candidate will be responsible for preparing coolant formulations, conducting fluid bench tests, maintaining comprehensive documentation, managing production samples, and investigating production quality improvements. This role will be expected to work cross-functionally with analytical, quality, and engineering departments.
We are currently seeking an applicant interested in an internship position at the Prestone Technology Center supporting PFX’s existing data center heat transfer fluid products and developing innovative technologies for cooling the next generation of AI hardware. This role will provide the accepted candidate the opportunity to support research activities, production, product stewardship, and technical growth. A person who is pursuing a chemistry undergraduate degree is preferred. Experience in a wet-chemistry lab is required Job assignments are varied; thus, flexibility is essential.
This is a fully on-site position based at our Danbury, CT location that will be offered during the Summer 2026, lasting for approximately 10-12 weeks. Work schedule is Monday-Friday, 40 hours/week. No housing or relocation assistance provided.
As part of the Research and Development team an intern must be able to work on multiple R&D or Development test items simultaneously. Duties include but are not limited to preparing blends of heat transfer fluids/coolants, setting up, maintaining, and tearing down various bench tests, logging and managing the testing of samples received from production or customer sites. An interest in automobile technology is highly desirable.
Minimum Requirements:
- Minimum education required is a High School degree and enrollment in undergraduate program.
- Minimum of 2 semesters equivalent of hands-on experience in a university, government, or commercial wet chemistry laboratory (organic, analytical, etc.).
- Must be able to follow instructions, work independently and safely in a laboratory environment and work on several projects at the same time.
- Ability to work well with peers across multiple disciplines is required.
Principal Duties and Responsibilities:
Job assignments are varied, and flexibility is essential. Basic requirements include
- Conducts activities following established Corporate and Site Safety procedures and notifies the Supervisor of any unsafe conditions or practices in the area.
- Prepares blends from provided formulations and blend instructions
- Set up, monitoring, and tear down of laboratory bench testing
- Manages incoming samples from production/customers (log, transfer, schedule testing, report results)
- Records and tabulates data in laboratory notebook in legal form following defined procedures.
- Observes irregularities, unusual behavior, or trends in tests, and communicates observations to Supervising Managers.
- Communicates the results of work to Supervisors following prescribed procedures.
Key Responsibilities
- Plan, schedule and carry out to completion, laboratory experiments assigned by supervisor with supervision of a senior lab member. Communicates results, conclusions and recommendations in person and in formal written reports.
- Must be able to safely follow detailed procedures, making observations, recording test data into spreadsheets and laboratory notebooks, and summarizing data into presentable form.
- Ensure that experiments are completed on time, and data is well organized and reported
- Possess good oral communication skills and a flexible approach to work. Conducts self in a professional manner and exerts a positive impact upon the morale and attitude of other team members.
internship
P
R&D Chemistry Intern - Analytical Lab
🏢 Prestone Official
Salary not disclosed
About PFX™
We engineer leading fluid solutions that keep the world moving and we’re building a better future while we do it. As a vertically integrated global powerhouse, we operate 17 manufacturing facilities and 4 R&D centers across the world, delivering performance from lab to road in over 40 countries.
PFX Group™ brings together a family of trusted companies including Recochem, Prestone, Adam’s Polishes, B&B Blending, Kost USA, Ultra Clear, POR and Auto-Chem, each with deep expertise, regional insight, and a shared commitment to engineering excellence.
From automotive and heavy-duty thermal management systems to household and industrial solutions, our products are built for performance, reliability, and a commitment to sustainability. Join us and be part of a team that’s redefining what’s possible in fluid technology.
Job Summary:
The Analytical Lab Intern plays an integral role in product development and growth of the PFX /Prestone Organization. The responsibilities include the setup, testing, and documentation of analytical testing including physical properties and wet chemistry testing, based out of the PFX/Prestone Danbury, CT site. The PFX/Prestone Technology Center Analytical laboratory also performs ICP, HPLC/UHPLC, and GC/GC-MS testing on automotive consumer products. The Analytical Intern will be expected to run a variety of analytical tests in a demanding fast-paced environment with the internal R&D team as well as external partners to support the development of products, and solve problems based on the needs of the business.
Position Description:
We are currently seeking an applicant interested in an internship position in the Prestone Technology Center conducting analytical testing to support research activities, production, product stewardship, and technical growth. A person who is pursuing a chemistry undergraduate degree is preferred. Job assignments are varied; thus, flexibility is essential.
This is a fully on-site position based at our Danbury, CT location that will be offered during the Summer 2026, lasting for approximately 10-12 weeks. Work schedule is Monday-Friday, 40 hours/week. No housing or relocation assistance provided.
As part of the Research and Development team an intern must be able to work on multiple R&D or Development test items simultaneously. Duties include but are not limited to running and monitoring analytical laboratory testing equipment, and conducting wet chemistry tests to evaluate automotive products, with supervision. An interest in automobile technology is highly desirable.
Minimum Requirements:
- Current enrollment in undergraduate program.
- Must be able to follow instructions, work independently and safely in a laboratory environment and work on several projects at the same time.
- Completion of an analytical instrumentation course is a plus.
- Ability to work well with peers is required.
Principal Duties and Responsibilities:
Job assignments are varied, and flexibility is essential. Basic requirements include
- Conducts activities following established Corporate and Site Safety procedures and notifies the Supervisor of any unsafe conditions or practices in the area.
- Operates analytical equipment for samples submitted to the PTC Analytical laboratory, including pH, Refractive Index and Specific Gravity meters.
- Records and tabulates data in laboratory notebook in legal form following defined procedures.
- Observes irregularities, unusual behavior, or trends in tests, and communicates observations to Supervising Managers.
- Communicates the results of work to Supervisors following prescribed procedures.
Key Responsibilities
- Plan, schedule and carry out to completion, sample testing in accordance with PTC Analytical Laboratory Management system with supervision. Communicates results, conclusions and recommendations in person and in formal written reports.
- Must be able to safely follow detailed Analytical test procedures, making observations, recording test data into spreadsheets and laboratory notebooks, and summarizing data into presentable form.
- Ensure that samples are reported on time, meeting quality and turnaround targets.
- Possess good oral communication skills and a flexible approach to work. Conducts self in a professional manner and exerts a positive impact upon the morale and attitude of other team members.
internship
D
IT Solution Architect (Financial Systems) - Remote
✦ New
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Amit, at 224 507 1290 Title: IT Solution Architect (Financial Systems)
- Remote Location: Remote (Candidates local to Corning, NY and Charlotte, NC are preferred.
Open to candidates in other locations; candidates must be willing to work EST time zone) Duration: 12 Months with possibility of extension based on demand.
Schedule: Full-time, M-F, 8 AM
- 5 PM.
Some potential flexibility may be required for after-hours work, as needed.
Travel
- up to 25% for travel to Corning, NY.
Estimated as one week per month based on project need.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Position Summary The IT Solution Architect for Supply Chain and Finance is responsible for designing, developing, and guiding the implementation of enterprise technology solutions that support client's financial and supply chain processes.
This role collaborates closely with business stakeholders and cross-functional IT teams to ensure systems are scalable, secure, and aligned with organizational strategy.
The architect enables operational excellence by shaping solution roadmaps, ensuring platform integrity, and driving continuous improvement across finance and supply chain applications.
Key Responsibilities Solution Architecture and Design Develop end-to-end architectural designs for finance and supply chain systems in alignment with business objectives.
Assess existing application landscapes and recommend improvements, modernization opportunities, and integration strategies.
Ensure solutions comply with security, data governance, and enterprise architecture standards.
Business Partnership and Collaboration Engage with Finance, Supply Chain, and IT partners to understand business needs and translate them into technical requirements.
Participate in recurring strategic and operational touchpoints, including cFIN review sessions and architecture-focused team meetings.
Provide subject matter guidance on financial systems such as OneStream and other platforms influencing client's digital finance ecosystem.
Technical Leadership and Support Serve as the technical lead for solution implementations, enhancements, and integrations across finance and supply chain domains.
Address escalated issues, provide root-cause analysis, and ensure long-term stability of assigned applications.
Partner with engineering and operations teams to ensure solution resilience, performance, and sustainability.
Governance, Standards and Documentation Contribute to the development of architecture standards, design patterns, and best practices.
Maintain accurate architectural documentation, including roadmaps, diagrams, functional specifications, and integration models.
Continuous Improvement and Innovation Evaluate emerging technologies and recommend opportunities to enhance process efficiency, automation, and system capabilities.
Support modernization initiatives that strengthen client's digital transformation objectives in the finance and supply chain organizations.
Required Qualifications
- Education and Experience Bachelor's degree in Information Technology, Computer Science, Engineering, or related field (minimum required).
5 years of experience as a Solution Architect with financial systems.
Proven experience architecting solutions in enterprise finance and/or supply chain environments.
Deep knowledge of financial systems (e.g., OneStream, SAP cFIN (Central Finance), or similar platforms).
Familiarity with SAP finance and supply chain modules.
Strong understanding of systems integration, data flows, and enterprise application ecosystems.
Ability to translate complex technical concepts into clear business language.
Key Competencies Strategic Thinking Ability to design future-focused, scalable solutions.
Technical Expertise Strong architecture and platform skills across finance and supply chain.
Communication and Influence Effectively collaborates with technical and non-technical stakeholders.
Problem Solving Skilled at diagnosing complex issues and proposing durable solutions.
Execution Ability to manage multiple priorities and deliver high-quality outcomes.
Preferred Qualifications Experience working in a global, matrixed organization.
Understanding of data governance, security protocols, and architecture frameworks.
Demonstrated ability to lead collaborative solution workshops and stakeholder discussions.
Interview Process: Two rounds.
First round phone screen with direct manager.
Second round video panel interview, including technical review.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP cFIN, OneStream
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Amit, at 224 507 1290 Title: IT Solution Architect (Financial Systems)
- Remote Location: Remote (Candidates local to Corning, NY and Charlotte, NC are preferred.
Open to candidates in other locations; candidates must be willing to work EST time zone) Duration: 12 Months with possibility of extension based on demand.
Schedule: Full-time, M-F, 8 AM
- 5 PM.
Some potential flexibility may be required for after-hours work, as needed.
Travel
- up to 25% for travel to Corning, NY.
Estimated as one week per month based on project need.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Position Summary The IT Solution Architect for Supply Chain and Finance is responsible for designing, developing, and guiding the implementation of enterprise technology solutions that support client's financial and supply chain processes.
This role collaborates closely with business stakeholders and cross-functional IT teams to ensure systems are scalable, secure, and aligned with organizational strategy.
The architect enables operational excellence by shaping solution roadmaps, ensuring platform integrity, and driving continuous improvement across finance and supply chain applications.
Key Responsibilities Solution Architecture and Design Develop end-to-end architectural designs for finance and supply chain systems in alignment with business objectives.
Assess existing application landscapes and recommend improvements, modernization opportunities, and integration strategies.
Ensure solutions comply with security, data governance, and enterprise architecture standards.
Business Partnership and Collaboration Engage with Finance, Supply Chain, and IT partners to understand business needs and translate them into technical requirements.
Participate in recurring strategic and operational touchpoints, including cFIN review sessions and architecture-focused team meetings.
Provide subject matter guidance on financial systems such as OneStream and other platforms influencing client's digital finance ecosystem.
Technical Leadership and Support Serve as the technical lead for solution implementations, enhancements, and integrations across finance and supply chain domains.
Address escalated issues, provide root-cause analysis, and ensure long-term stability of assigned applications.
Partner with engineering and operations teams to ensure solution resilience, performance, and sustainability.
Governance, Standards and Documentation Contribute to the development of architecture standards, design patterns, and best practices.
Maintain accurate architectural documentation, including roadmaps, diagrams, functional specifications, and integration models.
Continuous Improvement and Innovation Evaluate emerging technologies and recommend opportunities to enhance process efficiency, automation, and system capabilities.
Support modernization initiatives that strengthen client's digital transformation objectives in the finance and supply chain organizations.
Required Qualifications
- Education and Experience Bachelor's degree in Information Technology, Computer Science, Engineering, or related field (minimum required).
5 years of experience as a Solution Architect with financial systems.
Proven experience architecting solutions in enterprise finance and/or supply chain environments.
Deep knowledge of financial systems (e.g., OneStream, SAP cFIN (Central Finance), or similar platforms).
Familiarity with SAP finance and supply chain modules.
Strong understanding of systems integration, data flows, and enterprise application ecosystems.
Ability to translate complex technical concepts into clear business language.
Key Competencies Strategic Thinking Ability to design future-focused, scalable solutions.
Technical Expertise Strong architecture and platform skills across finance and supply chain.
Communication and Influence Effectively collaborates with technical and non-technical stakeholders.
Problem Solving Skilled at diagnosing complex issues and proposing durable solutions.
Execution Ability to manage multiple priorities and deliver high-quality outcomes.
Preferred Qualifications Experience working in a global, matrixed organization.
Understanding of data governance, security protocols, and architecture frameworks.
Demonstrated ability to lead collaborative solution workshops and stakeholder discussions.
Interview Process: Two rounds.
First round phone screen with direct manager.
Second round video panel interview, including technical review.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP cFIN, OneStream
Remote working/work at home options are available for this role.
Not Specified
Lead Electrical CAD Designer – Data Center Infrastructure (REMOTE) (WASHINGTON)
✦ New
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
Test Development Manager - Supports Hybrid Work Schedule (AUSTIN)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
**This position supports hybrid work schedule depending on organization needs.**
Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.
JOB SUMMARY
Jabil is seeking a Manufacturing Test Development Manager who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.
- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities
JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS:
- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.
Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.
JOB SUMMARY
Jabil is seeking a Manufacturing Test Development Manager who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.
- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities
JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS:
- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) - Cutting-edge Data Center Projects (WASHINGTON)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded