Engineering Jobs in Oak Brook Il Dupage County, IL

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

• 
  
• Assembling Aerospace products consisting of various components
  
• Enter data into MRP system using a computer.
  
• Actively participate in cross training program to improve and broaden skill set.
  
• Perform other responsibilities as required.
  

• 
  
• \"Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a 'U.S. Person', which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States, or who otherwise can qualify for a license that permits them to hold the position.\"
  
• Requires a high school education or equivalent experience. Ability to read work instructions in English, and strong math skills required.
  
• Reliability - attendance is a critical qualifications, we need a person who is able to arrive at work on time and work their scheduled shift
  
• May require 0-2 years of experience in the field, previous assembly experience preferred. Capable of entering data into ERP system. Ability to read and interpret component prints.
  
• Ability to verify part conformity using micrometers, calipers, dial indicators, and other gauges.
  
• Ability to perform repetitive tasks and lift/move up to 50lbs occasionally. May be required to stand for entire shift.
  

• 
  
• Competitive Hourly Wage
  
• Matching 401(k) contribution
  
• Medical/Dental/Vision Insurance - Start day 1
  
• Short-Term and Long-Term Disability Insurance
  
• Accidental Death and Dismemberment Insurance
  
• Life Insurance
  
• Flexible Spending Accounts (Medical and Dependent Care) & Health Savings Accounts
  
• Critical illness and Accident Insurance, as well Life Insurance, and an EAP
  
• Educational Reimbursement
  

• 
  
• Medical, Dental, Vision and Prescription Drug Coverage
  
• Spending accounts (HSA, Health Care FSA and Dependent Care FSA)
  
• Paid Time Off and Holidays
  
• 401k Retirement Plan with Matching Employer Contributions
  
• Life and Accidental Death & Dismemberment (AD&D) Insurance
  
• Paid Leaves
  
• Tuition Assistance
  

Director of Manufacturing Operations

Location: Hybrid / On-site (as required)

Reports to: COO

The Director of Manufacturing Operations is responsible for end-to-end manufacturing execution and scale for DeNova Detect’s life-safety product portfolio. This role ensures that products are built safely, on time, on cost, and in compliance, while building a resilient manufacturing ecosystem capable of supporting rapid growth across retail, commercial, utility, and legislative-driven demand.

This leader serves as the operational bridge between engineering, supply chain, quality, regulatory, and commercial teams, translating product strategy into reliable, scalable production.

Core Responsibilities

Manufacturing & Production Leadership

• Own global manufacturing strategy across internal and contract manufacturing partners
• Establish and manage production plans aligned with sales forecasts and launch timelines
• Ensure consistent achievement of cost, quality, delivery, and yield targets
• Lead capacity planning to support demand surges driven by retail promotions, legislation, or national media exposure
• Drive continuous improvement using Lean, Six Sigma, or similar methodologies

Contract Manufacturer & Supplier Management

• Select, onboard, and manage contract manufacturers (CMs) and key component suppliers
• Negotiate manufacturing agreements, pricing, lead times, and service-level expectations
• Implement performance scorecards for CMs and suppliers (OTIF, quality, cost, responsiveness)
• Conduct regular audits and business reviews to ensure compliance and risk mitigation

Quality, Compliance & Regulatory Readiness

• Ensure manufacturing processes comply with all applicable standards and certifications, including:
• UL /ETL (as applicable)
• State and federal life-safety regulations
• Partner with internal teams to support certifications, audits, and change control
• Ensure all NCE Quality Control metrics are met or exceeded
• Implement continuous improvement process for quality and manufacturing
• Own manufacturing-related corrective actions (CAPAs), root cause analysis, and preventive controls

New Product Introduction (NPI) & Scale-Up

• Lead manufacturing readiness for new product introductions from pilot builds through mass production
• Partner with Engineering on DFM/DFA, tooling decisions, and test strategies
• Establish production validation, ramp-up plans, and early yield stabilization

Cost Management & Margin Expansion

• Drive COGS reduction initiatives without compromising safety or quality
• Optimize labor, materials, tooling, and logistics costs
• Support margin expansion initiatives tied to volume growth and supplier consolidation

Risk Management & Business Continuity

• Identify and mitigate manufacturing risks (single-source suppliers, geopolitical risk, capacity constraints)
• Develop contingency plans for supply disruptions, demand spikes, or quality events
• Support inventory strategy decisions in collaboration with Supply Chain and Finance

Leadership & Cross-Functional Collaboration

• Serve as a key operational voice in executive planning and growth discussions
• Collaborate closely with our Japan Engineering Team, Sales and Marketing

Required Qualifications & Experience

• Bachelor’s degree in Engineering, Operations Management, or related field
• 10+ years of progressive experience in manufacturing operations, preferably in:
• Consumer electronics
• Life-safety, IoT, or regulated hardware products
• Proven experience managing contract manufacturers and global supply partners
• Strong working knowledge of regulated manufacturing environments
• Demonstrated success scaling production in high-growth environments

Preferred

• MBA or advanced degree
• Experience with UL-listed or safety-critical products
• Lean Six Sigma certification
• Experience supporting national retail or utility-driven distribution models

This role is critical to DeNova Detect’s ability to save lives at scale. As demand grows through retail expansion, legislative adoption, and national awareness campaigns, the Director of Manufacturing Operations ensures that every product shipped meets the company’s promise of safety, reliability, and trust.