Engineering Jobs in North Reading Massachusetts

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Principal Product Engineer will learn the technical aspect of key product in the Andover, MA factory.  The Product Engineer will be product centric technical liaison, focused on driving collaboration across work centers and all disciplines to resolve technical issues, improve efficiencies and optimize overall product yield to ensure high-quality and cost-effective products and systems. You will utilize data analysis, CORE methodologies, and technical understanding to maximize overall product test yield, efficiency, and value.

What You Will Do

• Address major yield and technical issues highlighted by tech leads and factory operation managers.

• Perform data analysis and provide direction for overall product yield and performance improvement.

• Facilitate collaboration across manufacturing work centers and design engineering.

• Empower production test engineer to resolve complex failures through data driven troubleshooting technique.

• Establish technical understanding of the product architecture, subassemblies, and test requirement.

• Partner with test and design engineering team to develop sustaining solution to technical problems with root cause and corrective action identification.  

• Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment.

Qualifications You Must Have  

• Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and typically a minimum 8 years of relevant experience

• 4+ years in Production testing/troubleshooting

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Preferred majors: Electrical Engineering, Computer Science/Engineering Technology

• The ability to interpret and analyzer RF parametric data

• Experience with lean principles in a manufacturing environment

• Current DOD Secret Security Clearance

• Excellent communication skills (written and verbal) and presentation skills

• Good interpersonal skills to manage tasks that bridge operations, production control, engineering, supply chain, and customer relations

• Experience applying technical principles in the manufacturing life cycle

• Experience with Quality Systems and their application

• Shop Floor Management

• Strong engineering aptitude and analytical skills

• Technical problem solving

• Customer and company oriented and driven to meet or exceed expectations

• Ability to work cohesively in a team environment

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering, Integrated Systems Department is seeking a Systems Engineering Technical Lead for the NASAMS product line. This role requires strong technical expertise and engineering leadership skills to drive the design and development of world-class air and missile defense systems.

The Integrated Systems Department supports Raytheon by providing world-class weapon systems engineering. Domain expertise includes radar systems, effector systems, battle management, command and control, network design, battlespace integration, and interoperability for both domestic and international customers.

You will work alongside motivated engineers who are responsible for conducting systems engineering studies and trades; supporting system requirements definition and analysis; and contributing to algorithm development, integration, test, and evaluation.

What You Will Do

• Provide technical oversight and management for a variety of Systems Engineering efforts

• Concept and requirements development (including decomposition and flowdown) within a mature product-line

• Concept of Operations (CONOPS) development and design

• Algorithm optimization and development

• Multi-disciplinary development efforts across the kill-chain for an Air and Missile Defense System

• Collaboration with customer to bring new capabilities to the warfighter

• Functional analysis of real world and test data; trade studies to bring advanced features to fielded system

• Support and lead Internal and External Program and Design Reviews

• Collaborate with other IPT/CPT leads from the various functions and products

• Support and lead Internal Research and Development for future capability upgrades

• System integration and test support, including live fire test events

• Periods of travel up to 25% of time both domestically and internationally

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience

• Experience with Air Defense Systems in systems engineering roles supporting development or production

• Experience with managing budget, scope and/or earned value

Qualifications We Prefer

• Experience interfacing with external customers and industry partners

• Excellent communication skills, written and verbal, with a variety of audiences

• Self-motivated, passionate leader

• 5+ years of experience in Air Defense Systems, Systems Engineering production or development

• Existing DoD Security Clearance

• Knowledge of Air Defense systems (examples – Patriot and NASAMS Systems)

• Experience managing competing programmatic priorities

• Experience making challenging technical decisions

• Familiarity with the Raytheon Integrated Product Development System (IPDS) or equivalent

• Experience with Earned Value Management (EVM) (plus, experience with Raytheon execution of EVM)

• Advanced degree in EE, CE, Physics, Math, ME, Aerospace\

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Are you a hands-on Quality leader who thrives in high-accountability environments and believes great culture drives great results? We’re looking for a Site Quality Manager to lead all Quality functions at our North Billerica facility and play a key role in shaping performance, compliance, and team development.

If you’re passionate about building strong teams, driving continuous improvement, and ensuring world-class quality standards — this is your opportunity to make a measurable impact.

As the Site Quality Manager, you will:

• Lead and continuously improve our AS9100 / ISO 9001 Quality Management System
• Oversee MRB, NCMRs, CAPAs, SCARs, RMAs, and root cause investigations
• Direct all inspection activities (In-Process, Pre-Mold, Final) including AS9102 First Article Inspections
• Ensure cable and harness assemblies meet IPC-620, J-STD-001, AS9102, and customer requirements
• Review and approve work order packages, C of Cs, and shipment documentation
• Monitor quality metrics, defect trends, and drive Zero Defect initiatives
• Lead internal audits and support customer and certification audits
• Partner cross-functionally with Production, Engineering, Planning, Procurement, and Corporate Quality
• Develop and mentor the Quality team, building capability and accountability at every level
• Serve as the primary customer liaison for quality-related matters

Technical Expertise:

• Strong working knowledge of AS9100 Rev D and ISO 9001
• Experience with AS9102 First Article Inspection
• Familiarity with IPC-620 and J-STD-001 (Space Addendum a plus)
• Deep experience with NCMR, MRB, CAPA/RCCA, and root cause analysis
• Aerospace or military manufacturing background preferred
• Ability to read and interpret engineering drawings, wire lists, and MIL specs
• Experience in build-to-print cable/harness manufacturing is a plus

Leadership & Impact:

• 5+ years in Quality Assurance/Quality Control within manufacturing
• Prior team leadership experience
• Proven track record leading corrective actions to closure
• Experience conducting internal audits under AS9100
• Strong analytical skills with the ability to turn data into actionable insights
• Clear, professional communication with customers and suppliers

This is a high-visibility leadership role in a fast-paced aerospace manufacturing environment where quality is mission-critical.

Role Overview

The Key Account Manager (KAM) is responsible for managing and expanding Pion’s most

strategic customer relationships within the Boston market. This role is central to the

company’s growth strategy and carries meaningful ownership over revenue performance,

account expansion and long-term customer value.

The KAM operates with a high degree of autonomy and accountability, working in a

performance-driven environment where accurate forecasting, structured account

planning, and disciplined execution are essential. This is not a transactional sales role - it

requires strategic thinking, scientific credibility and operational rigor.

Key Responsibilities

Strategic Account Management

 Own and execute comprehensive account plans aligned to company growth targets

 Build deep, multi-level relationships across R&D, Analytical, CMC and Procurement

 Understand customer workflows, strategic priorities, and long-term pipelines

 Position Pion as a long-term partner through value-based, consultative engagement

 Identify expansion opportunities tied to new applications, enhanced products and

evolving customer needs

Sales Execution & Growth

 Deliver against defined revenue and growth objectives for assigned territory

 Manage complex sales cycles involving capital equipment, consumables and

services

 Maintain disciplined pipeline management, opportunity qualification and

forecasting

 Ensure CRM accuracy and timely updates to support operational planning and

leadership visibility

 Set and manage customer expectations around manufacturing schedules, lead

times and delivery constraints

Operational Excellence & Rigor

 Operate with a high level of structure, accountability and follow-through

 Partner closely with Operations, Manufacturing, Applications, and Service to drive

predictable outcomes

 Proactively identify risks and constraints, escalating appropriately and early

 Contribute to continuous improvement of sales processes, tools, and cadence

Customer Advocacy & Internal Collaboration

 Serve as the primary commercial owner for assigned territory accounts

 Coordinate internal resources to ensure successful installations, adoption and

ongoing value realization

 Act as the voice of the customer, providing actionable feedback to Product and

Leadership teams

 Navigate escalations and competitive pressures with professionalism and clarity

Market & Competitive Insight

 Maintain strong awareness of regional market dynamics, competitors and emerging

technologies

 Represent Pion customer meetings, scientific forums and industry events

 Identify high-growth opportunities within pharma, biotech, CDMOs and academic

institutions in the Boston ecosystem

Qualifications & Experience

Required

 Advanced degree in Chemistry, Pharmaceutical Sciences, Engineering or a related

scientific discipline preferred

 5+ years of experience in life sciences sales

 Demonstrated success managing complex, high-value strategic accounts

 Strong understanding of drug development workflows

 Ability to operate e􀆯ectively in a performance-driven, growth-oriented environment

 Strong organizational skills with a track record of operational discipline and

execution

 Willingness to travel regionally and occasionally nationally

Preferred

 Experience selling analytical instrumentation or pharmaceutical enabling

technologies

 Familiarity with capital equipment sales cycles

 MBA or advanced scientific degree

 Experience working cross-functionally within a global organization

What Success Looks Like

 Measurable contribution to Pion’s strategic growth targets

 Strong penetration and expansion within assigned key accounts

 Accurate forecasting and disciplined account management

 High customer trust and long-term partnership development

 Consistent demonstration of operational excellence and accountability

Why Join Pion

 Be part of a respected scientific company entering an exciting new growth phase

 Work with enhanced technologies that are expanding Pion’s impact in drug

development

 Operate in a role where individual performance directly influences company

success

 Collaborate with a knowledgeable, committed team focused on execution and

results

 Competitive compensation, incentive plan and benefits

Gabriele & Company, recruiters for manufacturing and supply chain professionals, is working with a local manufacturer of electromechanical products used in industries including semiconductors, defense and medical devices.

Our client is looking for a Test Technician to build, maintain, and operate test stands to validate performance, reliability, and safety of industrial refrigeration systems and thermal management equipment.

Key Responsibilities

• Assemble, plumb, wire, and commission test stands including pumps, heat exchangers, valves, sensors, and data acquisition systems
• Execute functional, performance, and safety tests per established procedures
• Monitor and record critical parameters: temperatures, pressures, flow rates, power consumption
• Troubleshoot and document test failures; collaborate with engineering on corrective actions
• Maintain test equipment, calibration status, and lab organization
• Follow safety protocols including lockout/tagout, electrical safety, and refrigerant handling

Qualifications

• 2+ years as test technician or manufacturing technician in industrial/lab environment
• Hands-on experience with mechanical assembly, plumbing, basic electrical wiring
• Familiarity with refrigeration systems, HVAC, pumps, or heat exchangers
• Ability to read mechanical drawings, electrical schematics, and test procedures
• Strong troubleshooting skills and attention to detail

Preferred

• Knowledge of instrumentation and data acquisition systems
• EPA refrigerant certification or willingness to obtain

Compensation is hourly with benefits that included health/dental/vision, VERY generous PTO plan, 401(k) with match and more!

Vaxess is developing a pipeline of next-generation therapeutics on our novel micro-array patch platform. With only five minutes of wear-time on the skin, the Vaxess’ patch combines room temperature stability with simplified application to dramatically alter the way that drugs are delivered. Vaxess is committed to enabling products that are not only more effective, but also more accessible to patients around the world.

The Role

We are seeking a motivated and detail-oriented Research Associate with strong hands-on experience in chromatographic analysis to support QC release and stability testing. The successful candidate will perform routine cGMP QC testing using HPLC methods (RP-HPLC, SEC, IEX), Agilent HPLC systems, and additional supporting assays in a fast-paced, collaborative environment. This is a unique opportunity to be part of an emerging early-phase clinical company bringing innovative technology to the global market.

Key Responsibilities

• Perform routine QC release and stability testing using HPLC methods including RP-HPLC, SEC, and IEX.
• Prepare samples, operate Agilent HPLC systems, verify system suitability, and ensure analyses meet method and specification requirements.
• Execute complementary analytical assays such as UV-Vis, pH, surface tension, and mechanical tests.
• Maintain complete, accurate documentation in compliance with cGMP, ALCOA+, and data integrity requirements.
• Conduct routine instrument care (solvent flushes, column care, daily checks) and assist troubleshooting under supervision.
• Process and review chromatographic data in Agilent OpenLab CDS.
• Support method qualification, validation, and transfer activities by executing protocols and recording observations.
• Maintain calibration, maintenance, and service records for analytical instrumentation.
• Independently author method SOPs, analytical protocols, technical reports, and contribute to regulatory submissions.
• Collaborate cross-functionally with QC, Analytical Development, Process Development, Manufacturing, and Regulatory teams to enable program success.
• Maintain rigorous laboratory documentation and complete, audit-ready analytical records.
• Thrive in a fast-paced, cross-functional environment with excellent communication and organizational skills.

Qualifications

• Bachelor’s degree in Chemistry, Biochemistry, Chemical Engineering, or related field with 1–3 years of experience; or a master’s degree with relevant laboratory experience.
• Hands-on experience operating HPLC systems; Agilent systems and OpenLab CDS experience strongly preferred.
• Practical experience with chromatographic techniques including RP-HPLC, SEC, and IEX.
• Experience supporting QC release or stability testing in a GMP/GLP environment.
• Strong attention to detail and ability to follow SOPs precisely.
• Excellent documentation practices and understanding of data integrity.
• Strong organizational skills with the ability to manage multiple workflows and prioritize effectively in a fast-paced environment.
• Excellent verbal and written communication skills and comfort working within interdisciplinary teams.
• Commitment to collaborative work within interdisciplinary project teams.

At Vaxess, we’re bringing together exceptional talent to drive our product development forward. We value collaboration, curiosity, and a dynamic work environment. To apply, please submit your CV/resume to

Vaxess is developing a pipeline of next-generation therapeutics on our novel micro-array patch platform. With only five minutes of wear-time on the skin, the Vaxess’ patch combines room temperature stability with simplified application to dramatically alter the way that drugs are delivered. Vaxess is committed to enabling products that are not only more effective, but also more accessible to patients around the world.

The Mechanical Engineer is a hands-on position involving designing, building, and maintaining automated production equipment throughout its lifecycle. This role will be responsible for design, assembly, installation, qualification, ongoing maintenance, and optimization of automated production systems requiring expert troubleshooting of mechanical assemblies and systems, performing root cause analysis, and implementing corrective actions to ensure efficient, reliable manufacturing operations.

Responsibilities

• Design, implement, and maintain novel automated systems and solutions that contribute to current manufacturing and scale up of manufacturing operations to eventual commercialization.
• Document equipment and procedures though User Requirements Specifications, detailed mechanical, electrical, and assembly drawings, and use and maintenance SOPs. Contribute to the implementation and maintenance of the Quality Management System.
• Collaborate closely with cross-functional teams to support product development and manufacturing activities, and to identify and resolve manufacturing issues.
• Contribute to continuous improvement to increase safety, quality, and efficiency of manufacturing.

Qualifications

• BS or advanced degree in Mechanical Engineering or a related discipline.
• At least 2-5 years of experience in designing, building, installing, qualifying, and maintaining automated systems for high volume medical device manufacturing.
• Experience writing and executing IQ, OQ and PQ protocols.
• Experience developing URS, FAT and SAT documents for automated equipment
• 3D CAD (SolidWorks or similar) as well as Mechanical design of fixtures, assemblies and equipment.
• Understanding and working knowledge of mechanical linkages, power transmissions and practices.
• Understanding of diverse fabrication techniques, manufacturing processes, and Design for Manufacturability
• Excellent time and project management skills and proven ability to meet goals and deadlines.
• Demonstrated abilities to learn new skills and fields, creatively solve challenging technical problems, think independently, and work collaboratively in diverse multidisciplinary teams.
• Entrepreneurial spirit and drive to positively impact global human health.

At Vaxess, we’re bringing together exceptional talent to drive our product development forward. We value collaboration, curiosity, and a dynamic work environment. To apply, please submit your CV/resume to .

Project Manager – Construction

Location: Woburn, MA Area

Compensation: $110,000 – $135,000 base salary + bonus

Employment Type: Full-Time

Overview

An established construction management firm in the Greater Boston area is seeking a Project Manager to lead complex building projects from preconstruction through completion. This role works closely with field leadership, design teams, and ownership groups to ensure projects are delivered on schedule, within budget, and to high quality standards.

This position offers strong long-term career growth, a collaborative team environment, and a comprehensive compensation and benefits package.

Responsibilities

• Manage project planning, scheduling, and overall execution
• Coordinate with Superintendents and project leadership to maintain progress and resolve challenges
• Oversee project documentation including RFIs, submittals, permits, and contract records
• Support procurement activities including subcontractor coordination and scope alignment
• Administer change orders and maintain scope control
• Act as primary contact for clients, architects, and consultants
• Prepare budgets, forecasts, and cost tracking reports
• Lead project meetings and maintain consistent communication across teams
• Ensure adherence to safety, quality, and schedule expectations
• Mentor junior project staff and support team development
• Manage project closeout including punch lists and final documentation
• Maintain strong client and partner relationships

Qualifications

• Bachelor’s degree in Construction Management, Engineering, or related field (or equivalent experience)
• 6–10+ years of construction project management experience
• Experience supporting large, complex building projects preferred
• Strong understanding of drawings, specifications, scheduling, and cost control
• Experience with construction management software (Procore, MS Project, Bluebeam, Excel or similar)
• Strong organizational and leadership skills
• Ability to work effectively in active construction environments

Compensation & Benefits

• Competitive salary plus performance bonus
• Comprehensive health and retirement benefits
• Professional development opportunities
• Collaborative, team-oriented culture
• Long-term career growth potential

OPTIMUM CONSTRUCTION, INC. is one of New England’s foremost construction managers and general contractors with a broad portfolio of projects for commercial, corporate, healthcare, housing, and institutional clients.

Our culture is defined by our simple purpose – Build Better Relationships & Better Buildings. We believe taking the time to really know people (each other, our clients, our subs) to be the key behind creating value and leading projects that connect people in New England.

Our team is growing. Optimum is hiring a full-time Assistant Project Manager to help us continue this great work and serve as a key team member of the project team. This position will be responsible for assisting in leading project teams within the construction projects from the preconstruction and construction phase through closeout with the Project Manager. Duties include identifying clients' or stakeholders’ project needs and goals, creating detailed plans to successfully complete projects, and organizing and storing project reports and documents for the Portland, Maine office location.

Essential Functions

• Assist in total project responsibility, scheduling, safety, staff compliance, buyouts, pay applications, monthly job status meetings, and quality control.
• Assist in managing client relationships, project planning, project document management, and assist in leading weekly subcontractor meetings.
• Assume full responsibility for submittal logs and submittals, RFI logs and RFIs.
• Assist in reviewing change orders with the General Contractor and Sub-contractors.
• Assist in scheduling and/or facilitating the various project meetings.
• Have thorough knowledge of all major project issues and priorities.
• Keep superiors informed concerning the progress of the project and any issues that might affect the schedule, budget or status of the project.
• Assist in close out of the project.
• Maintain and complete site reports (during all stages of production).

Qualifications

• Two (2) years of Project Management specific experience.
• BS in Engineering, Construction Management, or related field preferred.
• Knowledge of the construction process and understanding of the specifications and field labor.
• Knowledge of the project management process and principles of scheduling and estimating.
• Strong skills in time management, communication, and the ability to work within tight deadlines and under pressure.
• Ability to develop and maintain positive relationships with all parties involved in the construction project, while handling difficult issues and/or personalities.
• Self-motivated with excellent time management and organizational skills.
• Demonstrates strong critical and analytical thinking abilities.
• Proficient in using: Procore, Microsoft Word, Excel & Project.
• Ability to lead and accomplish Optimum’s objectives by maintaining and fostering a strong sense of personal responsibility and urgency.
• Ability to independently prioritize, make timely decisions and rapidly respond to changes and problems while using Optimum priorities and best practices as guidelines.
• Ability to work effectively in a collaborative team environment and to adjust to changes in priorities and work plans.

Benefits

Optimum Construction Inc. offers a competitive salary and generous benefits package including medical and dental insurance; 401(K) with company matching; Paid Time Off (PTO) earned plus company-paid holidays; professional development; and a collaborative, rewarding culture rooted in a set of Core Values that we believe results in shared success. To learn more visit, Construction Inc. is an Equal Opportunity Employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, gender, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization. Optimum Construction makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Applications and Submissions

Candidates can apply online or send a resume and letter of interest including job history and salary requirements.

If you’re not in the market, but you know of someone that would be a great fit, please share their name with us!

We are looking for an experienced industrial property and building manager to join our client's real estate development team. Candidates must live in or near the Fitchburg, Wilmington, or Billerica area to be considered.

Key Responsibilities

• Own day-to-day operations of assigned properties, including full financial and physical performance
• Serve as primary point of contact for tenants; oversee vendor coordination and issue resolution
• Manage property financials including payables/receivables, budget development, variance tracking, and reporting
• Lead annual operating and capital budget preparation
• Conduct and formalize comprehensive inspection programs (weekly, monthly, quarterly, annual)
• Review and approve annual lease reconciliations and tenant estimates
• Interpret and negotiate commercial lease language and vendor contracts
• Bid, negotiate, award, and oversee service contracts in alignment with company standards
• Monitor vendor performance to ensure compliance with contractual and service-level expectations
• Partner with accounting to ensure accurate, timely reporting and contract compliance
• Oversee tenant improvements and capital projects from construction through move-in, ensuring lease compliance and smooth transition
• Support acquisitions and dispositions, including due diligence coordination with development and construction teams
• Ensure compliance with company policies, regulatory requirements, and governmental directives
• Represent the company professionally in all internal and external interactions

Qualifications

• Bachelor’s degree in Business Administration or related field preferred
• 3+ years of commercial property management experience
• Strong understanding of budgeting, lease analysis, and building operations
• Experience negotiating commercial leases and vendor contracts
• Ability to manage multiple priorities and exercise sound judgment in a fast-paced environment
• Strong analytical, organizational, and delegation skills
• Proficiency in Microsoft Office; experience with Yardi and/or Building Engines preferred
• Excellent written and verbal communication skills
• Proven ability to build strong tenant relationships and deliver high-quality service
• Self-directed with the ability to work independently and collaboratively

Our Program and Construction Management division has an immediate need for a temporary Clerk/Site Manager in Boxford MA. 

Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again.

Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients.  LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ.

• Monitor construction quality and progress
• Daily & Weekly reports, conduct job meetings and minutes 
• Measure T&M
• Review Payment requisitions
• Change orders
• Job photos
• Filing 

• 5 years experience minimum
• CSL, CMAA, RA or PE is a plus
• OSHA 10
• Pass CORI

Our Culture:
We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential.
 
We offer a competitive salary commensurate with experience, a comprehensive benefits package and a positive work environment. 

The LiRo Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability.

#ID22

#ZR22

PIdbfc49c9c339-3631

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

Salary Range: 65k-95k

Title: Materials Management Specialist/Senior Materials Management Specialist

Location: Woburn, MA (on-site 5 days per week)

Vaxess is developing a pipeline of next-generation therapeutics on our novel micro-array patch platform. With only five minutes of wear-time on the skin, the Vaxess’ patch combines room temperature stability with simplified application to dramatically alter the way that drugs are delivered. Vaxess is committed to enabling products that are not only more effective, but also more accessible to patients around the world.

The Role: 

Works under the operations team and in coordination with the Quality Assurance (QA) team to oversee the entire flow of materials, from procurement and inventory control to receipt to storage and distribution. Ensure all materials meet defined specifications and are available for intended use and quantities to support user needs. Provide continuous improvement efforts in purchasing, planning, and warehousing. Key responsibilities include strategic sourcing, inventory optimization, demand forecasting, supplier negotiation, and managing logistics for clinical distribution while reducing waste and costs.

Responsibilities: 

• Develop material strategies, forecasts demand, plans production and inspection schedules, and aligns material flow with business goals.
• Maintains optimal inventory levels, conducts physical counts, investigates discrepancies, and implements lean manufacturing principles.
• Supervises purchasing, inventory, and warehouse activities in a manner consistent with cGMPs.
• Assists Quality Assurance to assign and document the status for all materials used in the development of Vaxess products.
• Implements initiatives to reduce waste, cost efficiencies, and improve financial performance.
• Sources, negotiates, and purchases goods and services, building strong supplier relationships and ensuring quality and reliability.

Qualifications: 

• 2 to 5 years in Material Management or Shipping and Receiving in the Pharmaceutical or Medical Device Industries working in a cGMP Environment.
• Strong understanding of supply chain, logistics, and inventory principles.
• Experience with ERP Systems/SAP preferred.
• Experience with standard cGMP storage requirements for Quarantine, Release and Rejected materials.
• Experience with the receipt, storage, distribution, and shipping of temperature-controlled materials.
• Bachelor’s Degree in a relevant field (Logistics, Biomedical Engineering or Health Care Management and certifications (APICS, ISM) preferred.

At Vaxess, we’re bringing together exceptional talent to drive our product development forward. We value collaboration, curiosity, and a dynamic work environment. To apply, please submit your CV/resume to   

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Sr. Specialist, Project Engineering/Management (Space optical systems)

Job Code: 33326

Job Location: Wilmington, MA

Work Schedule: 9/80 (Every other Friday off)

Relocation: Relocation assistance is available to qualified applicants

Job Description:

L3Harris Space and Mission Systems has a need for an Integrated Product Team Lead (IPTL) and Control Account Manager (CAM) Project Engineer (PE). This critical position leads the development and delivery of cutting-edge Space-based payloads and sensors for remote sensing, missile warning and track, and space warfighting within technical, cost, and schedule objectives of a project baseline throughout all phases of the program life cycle. This role is responsible for full lifecycle Project Engineering support for a range of software and hardware development, assembly, and integration and test efforts.

The position is critical to our warfighter customer to ensure delivery of crucial space products!

• Responsible for successfully leading a project team to meet customer requirements within allocated cost and schedule commitments.
• Develops, oversees, and coordinates the cost/schedule/technical aspects of an ongoing engineering project within the program guidelines set by the Program Manager and customer.
• Reviews status of engineering projects and budgets, manages schedules, drives execution, identifies opportunities, and delivers results through achieving payment milestones.
• Assesses engineering issues and develops resolutions to meet productivity, quality, and customer-satisfaction goals and objectives.
• Identifies, tracks, mitigates, manages, and dispositions program-level risks and opportunities.
• Estimate resource and material needs for the project/product.
• Provides the coordination between resource managers/supervisors and ensures all necessary reviews and approvals are received.
• Understands how to develop a schedule using Earned Value (EV) and manage a project using the Earned Value Indicators on a DCMA surveilled program (highest rigor applied).
• Participate in small teams and perform a wide variety of tasks to drive execution (e.g., value stream mapping activities)
• Must have ability and willingness to work in a collaborative team environment on quick reaction projects and will have regular contact with customers.
• Must be able to get a program SAP security clearance

Qualifications:

• Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience
• Active Top Secret security clearance required
• Prior or current IPTL/CAM Professional experience
• Prior or current experience with project engineering and program execution
• Experience in managing multi-discipline programs across multiple locations
• Experience in managing a team Integrated Product Team Leads (IPTL) and driving labor resources in a matrix organization
• Experience with Technical Supplier Management, Risk and Opportunity Management

Preferred Additional Skills:

• Experience in space telescope, optical-mechanical development programs is preferred
• Experience or knowledge of Government contract acquisition lifecycle a plus
• Experience with management of design to cost activities
• Experience with program pursuit and proposal activities
• Experience with operations and/or manufacturing activities
• Experience in Root Cause Corrective Action process and techniques
• Experience managing projects with total budgets of $70M+
• Experience in software development and integration programs

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $106,500 – $197,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Lead, Mechanical Engineering - Thermal Analyst

Job Code: 33517

Job Location: Wilmington, MA

Job Schedule: 9/80 (Every other Friday off!)

Relocation: Relocation assistance is available to qualified applicants

Job Description:

L3Harris has an opportunity for a highly skilled Thermal Analyst to join our talented engineering organization. The Thermal Analyst will be a technical leader across multidisciplinary teams of engineers to create the best overall system design including thermal design, analysis, and test of optical systems operating in harsh space and ground environments. The candidate will possess in-depth understanding of aerospace thermal engineering technology and payload architectures for spacecraft sub-systems and instruments. These talents are used to direct and oversee teams who specialize in conductive, convective, and radiative analyses, understanding of heat pipes, radiative heat transfer, and thermal control hardware design (thermal blankets, surface treatments, heater tapes, thermistors) and the interaction with optical structures in order to minimize optical errors, and achieve operational temperatures. The role requires utilizing state of the art custom software in conjunction with Thermal Desktop and Finite Element Analysis (FEA) packages and often mentor other Thermal Analysts in the use of such tools.

Essential Functions:

• System level thermal design & development, payload level integration and test, and risk mitigation for space-based environments
• Perform thermal design and analysis tasks on complex mechanical hardware including precision mechanisms, electro-mechanical devices, aerospace mechanism design, complex electronics packaging, supporting space-based deployable mechanisms, avionics, innovative thermal and ground based systems
• Create and analyze design concepts using thermal analysis software & FEA
• Defines and establishes the technical approach to meet assigned objective
• Directs, coordinates and provides assistance to engineering team in order to meet assigned objectives
• Program support also includes requirements derivation and verification, system architecture development, loads derivation, trade studies, design sensitivity/optimization studies, preliminary and final design analysis, generation of analysis documentation (including presentation materials, and deliverable data packages), and leading system test activities
• Organization of thermal design and analysis as an IPT lead; frequently interfacing directly with customer technical leads and management.
• Prepares reports, formal documentation and presentation materials summarizing analysis results and present results to both external and internal groups, including leadership and customers
• Participates in and present information for Preliminary Design reviews (PDR), Critical Design Reviews (CDR) and Technical Interchange Meetings (TIM)
• Interfaces with outside suppliers/customers and other engineering disciplines to drive designs to closure (Structural, Systems Engineering, Electrical, Manufacturing, Performance, Quality, Configuration Management)
• Presents design details at program reviews to customers and independent reviewers
• Development of thermal test plans to manufacture and test payload sensor systems
• Support new business opportunities
• Mentor junior level engineers

Qualifications:

• Bachelor's Degree in Mechanical Engineering or other related engineering or science degree and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience
• 7+ years of professional experience using thermal analysis tools such as Thermal Desktop (preferred), Sinda, Flotherm, Icepak, etc.
• 4+ years of providing technical leadership to a multi-disciplinary mechanical engineering team through system requirements, design, analysis, test, hardware build, delivery and launch
• Professional experience with thermal analysis of mechanical and electronic systems, in space, air or ground environments
• Professional experience with thermal vacuum testing
• Ability to obtain and maintain a U.S. TS/SCI Security Clearance

Preferred Additional Skills:

• Experience with finite element analysis software
• Able to support design decisions with well documented engineering analyses and calculations
• Able to analyze problems and to focus and drive down to the root cause of problems quickly
• Experience in leading engineering teams from conceptual through detailed design phases
• Experience as a lead engineer, project engineer, or IPT lead is a plus.
• Experience with Microsoft office tools (Word, Excel, PowerPoint, etc.)
• Active TS/SCI clearance

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $122,000.00 - $227,000.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Locations: Atlanta | Boston | Heredia

Who We Are

Boston Consulting Group partners with leaders in business and society to tackle their most important challenges and capture their greatest opportunities. BCG was the pioneer in business strategy when it was founded in 1963. Today, we help clients with total transformation-inspiring complex change, enabling organizations to grow, building competitive advantage, and driving bottom-line impact.

To succeed, organizations must blend digital and human capabilities. Our diverse, global teams bring deep industry and functional expertise and a range of perspectives to spark change. BCG delivers solutions through leading-edge management consulting along with technology and design, corporate and digital ventures—and business purpose. We work in a uniquely collaborative model across the firm and throughout all levels of the client organization, generating results that allow our clients to thrive.

What You'll Do

POSITION DESCRIPTION

We are seeking a motivated and experienced Technical Application Engineer to lead the engineering, administration, and optimization of personal productivity applications across BCG. This role plays a critical part in ensuring that BCG's suite of productivity tools—including Microsoft 365, Adobe Acrobat and Creative Cloud, and other integrated third-party applications—are implemented and operated at peak performance. As a key member of the Productivity Tools team within BCG’s Personal Productivity Organization, you will collaborate with product owners, vendors, and architects and engineering teams to ensure seamless user experiences, effective governance, and ongoing operational excellence.

Key Responsibilities:

• Engineering & Administration
• Manage and configure enterprise application services across both legacy and cloud platforms.
• Lead upgrades, rollouts, patching, and migrations for a variety of applications.
• Conduct health checks, monitoring, troubleshooting, and performance tuning.
• Integrate applications with third-party platforms or in-house solutions.
• Support complex deployments and ensure high availability of services.
• Governance, Documentation & Support
• Define and maintain SOPs, administrative practices, and end-user documentation.
• Develop governance frameworks around licensing, lifecycle, and architecture.
• Provide Tier 3 escalation support and resolve complex technical issues.
• Mentor service desk teams and promote best practices in application usage and management.
• Collaboration & Cross-Team Engagement
• Coordinate with network, security, and support teams for seamless application service delivery.
• Participate in planning, migrations, upgrades, and project execution.
• Liaise directly with Microsoft, Adobe and other vendors for advanced configuration and support scenarios.

Core Focus Areas:

• Deliver robust engineering and operational support for Microsoft 365 apps, add-ins, Adobe Acrobat, MS Forms, and other productivity tools.
• Drive standardization and operational consistency across the firm’s application portfolio.
• Provide leadership and guidance within the M365 Application Governance Council.
• Contribute to the strategy and implementation of productivity-enhancing tools firmwide.

What You'll Bring

Experience Required:

• 5+ years of experience managing enterprise-grade applications, with 3–5 years specifically in Microsoft 365 administration and technical product analysis.
• Proven experience in Adobe Creative Cloud deployment and productivity enablement.
• Strong background in enterprise M365 configuration and governance, including automation tools like Power Automate and scripting with PowerShell and Microsoft Graph API.
• Advanced capabilities using GraphAPI, PowerShell, SQL, and Power BI for:
• Scripting and bulk administration
• Automating service management
• Data analysis and backend reporting
• Visualizing application performance metrics
• Background in implementing GenAI capabilities across Microsoft 365 (e.g., Powerpoint, Word, Excel) is a significant plus.
• Familiarity with Azure AD, Conditional Access, Defender for Office 365, Intune, and related services.
• Expertise in managing applications in a cross platform environment such as Windows, Mac (OSX), and iOS platforms.
• Experience across application development life cycles, including requirements design, development tracking, change/release management, and operational support.
• Ability to identify and manage integration dependencies across M365 apps and third-party solutions.
• Strong incident management, security compliance, and vulnerability remediation experience.
• Track record in defining KPIs and reporting on performance and service stability.
• Level C2 English proficiency as demonstrated by IELTS 8.5+, TOEFL iBT 110+, TOEIC 945+, CAMBRIDGE CPE, or comparable demonstrated proficiency.
• B.S. CS/MIS or four (4) additional years relevant experience in lieu of degree

Preferred Qualifications:

• Certifications such as MS-100, MS-101, SC-300, AZ-900 are highly desirable.
• Agile/Scrum experience and familiarity with Jira, Confluence, or Azure DevOps.
• Prior involvement in enterprise-level security policy enforcement and tooling compliance.
• Strong communication skills with an ability to convey technical issues to non-technical stakeholders.
• Key Attributes for Success:
• Excellent organizational and time management skills.
• Proven ability to manage multiple priorities in a fast-paced environment.
• Proactive problem-solver with a collaborative mindset.
• Clear, confident communicator with strong documentation capabilities.

Additional info

*** For US locations only ***

In the US, we have a compensation transparency approach.

Total compensation for this role includes base salary, annual discretionary performance bonus, retirement contribution, and a market leading benefits package described below.

• The base salary range for this role in Atlanta is $121,000.00 - $147,700.00 

This is an estimated range, however, specific base salaries within the range depend on various factors such as experience and skill set. It is not common for new BCG employees to be hired at the high-end of the salary range. BCG regularly reviews its ranges to ensure market competitiveness.

In addition to your base salary, your total compensation will include a bonus of up to 16% and a generous retirement contribution that starts at 5% and moves to 10% after 2 years.

All of our plans provide best in class coverage:

• Zero dollar ($0) health insurance premiums for BCG employees, spouses, and children

• Low $10 (USD) copays for trips to the doctor, urgent care visits and prescriptions for generic drugs

• Dental coverage, including up to $5,000 in orthodontia benefits

• Vision insurance with coverage for both glasses and contact lenses annually

• Reimbursement for gym memberships and other fitness activities

• Fully vested Profit Sharing Retirement Fund contributions made annually, whether you contribute or not, plus the option for employees to make personal contributions to a 401(k) plan

• Paid Parental Leave and other family benefits such as elective egg freezing, surrogacy, and adoption reimbursement

• Generous paid time off including 12 holidays per year, an annual office closure between Christmas and New Years, and 15 vacation days per year (earned at 1.25 days per month)

• Paid sick time on an as needed basis

Boston Consulting Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity / expression, national origin, disability, protected veteran status, or any other characteristic protected under national, provincial, or local law, where applicable, and those with criminal histories will be considered in a manner consistent with applicable state and local laws.

BCG is an E - Verify Employer. Click here for more information on E-Verify.