Engineering Jobs in Los Nietos, CA

As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.

The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.

The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.

As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.

The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.

Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.

Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.

Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.

Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.

Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.

Ability to provide project management reports as required, support senior level and customer reviews as necessary.

Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.

Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.

Ability to participate or lead in the product development process including design reviews.

5 to 10% Travel required.

Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.

Viewed as an expert and/or resource within the field by peers in and outside the organization.

Bachelor’s Degree and a minimum of 9 years of prior relevant experience.

Graduate Degree and a minimum of 7 years of prior related experience.

In lieu of a degree, a minimum of 13 years of prior related experience.

Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.

5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.

6 years’ strong experience with receiver, Antenna, or Radio design (i.e.

RF).

4 years’ experience with embedded Hardware design.

2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills: Strong familiarity with GPS Module design and topology.

Advanced with High-speed Analog design methodologies.

Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.

Familiar with FPGA design methodologies.

Proficient with DO-254 design.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.

The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English or Spanish .

For information regarding your Right To Work, please click here for English or Spanish .

AppleOne is partnering with an industry leader in custom chemical formulation and manufacturing based in Santa Fe Springs, CA. This organization serves as a critical partner to various industries, delivering high-quality, precision-engineered chemical solutions. Known for a culture of safety and reliability, they provide a dynamic environment where team members are empowered to take full ownership of the customer experience.

We are seeking a Sales Support Specialist for a full-time, onsite role. This position serves as the vital link between customers, Account Managers, vendors, and internal production teams. You will ensure that orders move accurately and efficiently while maintaining high standards of quality and safety. This role is highly suitable for a detail-driven professional who thrives in a fast-paced, evolving atmosphere and is motivated by the direct impact their work has on business success.

• Industry: Chemical Manufacturing / Industrial Solutions
• Job Function: Sales Support / Order Management
• Employment Type: Direct Hire
• Pay Rate: $24.00 – $27.00 per hour (Based on experience and skills)
• Workplace Type: 100% Onsite (Santa Fe Springs, CA)

Core Responsibilities

• Customer Advocacy: Serve as the primary point of contact for customer and Account Manager needs regarding order status and logistics.
• Order Management: Manage the full lifecycle of customer orders within the ERP system, ensuring accuracy from initial entry through final completion.
• Data Integrity: Maintain highly accurate documentation, pricing records, and customer/product profiles to ensure seamless internal transitions.
• Cross-Functional Coordination: Collaborate with vendors and internal departments to resolve issues and align production with customer expectations.
• Process Ownership: Proactively identify and resolve potential order hurdles to maintain customer trust and operational flow.

Required Qualifications

• Experience: 3 to 5 years of experience in sales support, customer service, or order management, preferably within a manufacturing or industrial environment.
• Technical Skills: Very strong proficiency in ERP systems and Microsoft Office Suite.
• Communication: Ability to communicate clearly and professionally with a variety of internal and external stakeholders.
• Adaptability: A strong ability to adjust to shifting priorities and changing customer needs in a high-volume environment.
• Accountability: A track record of taking ownership of outcomes and following through on complex tasks from start to finish.

POSITION DESCRIPTION

This position is responsible for day-to-day compliance of safety programs and related activities at the Vernon, CA facility.

Responsibilities:

• Environmental Compliance Programs:Ensure operations are compliant with applicable federal, state, and local regulations.
• Conduct audits and training programs as needed.
• Establish a working relationship with appropriate regulatory agency personnel.
• Generate reports and permit applications (air, water, waste), ensure compliance with applicable permit requirements.
• Review proposed manufacturing changes and assess environmental impact.
• Work to reduce waste generation and support any remediation activities under the direction of the Corporate HSE Director and Regional HSE Manager.
• Health and Safety Programs:Have oversight of Industrial Hygiene, Fire Prevention LOTO, PPE, etc. Ensure that programs are in place to assist in meeting Company objectives.
• Ensure training programs and in place to ensure compliance.
• Implement accident, near miss, and observation reporting programs to proactively manage safety performance.
• Lead root cause analysis investigation and manage documentation confirm corrective actions have been put in place ensuring complete case management of injuries (reporting, workers compensation, return to work, etc.).
• Build communications required to present incident details and corrective action plans to diffident levels of the business.
• Ensure Job Safety and Environmental Analyses/Job Hazard Analysis are being conducted as required.
• Evaluate operational practices to determine methods to eliminate workplace hazards.

Qualifications:

• Bachelor’s degree in Health & Safety or the Sciences
• Min of 3+ years of Health & Safety experience 2 years in a manufacturing environment.
• Experience with OSHA, LOTO, Root Cause Analysis
• Union experience a plus
• Needs to have occasional flexibility on start time.

Calgon Carbon | A Kuraray Company currently has an opportunity where you can be a part of our growing team as we provide our customers with outstanding products that make the air we breathe and the water we use safe for generations to come.  

Position: Senior Technical Sales Representative
Location: US – Remote West Coast

Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) – Generous Company Match!
Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities.  

Hours of work: Full-time position with hours Monday - Friday, typically 8:30 AM - 5:00 PM
Travel: 50%; air, automobile, and overnight travel to visit customer sites, and company meetings

Responsible for the sale of activated carbon, equipment and services as well as growing and maintaining current business relationships within the defined geographical and/or market specific territories. This position is responsible for municipal and/or industrial sales for various markets such as environmental, chemical, food, drinking water, wastewater, groundwater, and process applications, and requires selling/influencing decision makers in procurement, operations, management, consulting engineers, general contractors, etc. Typical territory revenue responsibility $12-$20 MM (not confined to this range).  This role has more autonomy for managing his/her territory than the TSR IV role.

Duties and Responsibilities (not limited to)
 

• Prepare and document all sales proposals and customer communications as required by the company and business unit directives. This will include the use of GCRM to record and share meaningful customer and market information, bid results, competitive pricing, and other relevant activities
• Update sales forecast on a regular basis
• Keep the manager informed of all activities, including business threats and opportunities, in the assigned customer and market territory
• Assist with Accounts Receivables as needed
• Expand and strengthen the assigned business portfolio by driving strategic growth initiatives and cultivating high-value relationships across target markets
• Identify and secure new opportunities through proactive engagement, market intelligence, and alignment with organizational objectives
• Deliver exceptional customer service by maintaining a deep understanding of client needs and industry trends
• Build trusted, multi-level relationships with key stakeholders across consulting engineering firms, utilities, and manufacturing companies, ensuring tailored solutions and long-term value through best-in-class business practices
• Conduct all activities with a strong commitment to health, safety, and environmental awareness
• Promote safe business practices through professional behavior and by supporting company policies and standards in interactions with customers, partners, and colleagues
• Attend and be involved with market specific conferences and organizations
• Influence/Drive the creation of marketing collateral through communication of market specific needs
• Coordinate and participate in webinars, seminars and/or Lunch and Learns, as needed, to educate customers, prospects, engineering firms, and other stakeholders
• Responsible for the achievement of geographical territory annual sales, profit, and other plan goals
• Conduct regular outbound sales calls to prospect, qualify, and nurture leads, ensuring a full and healthy sales pipeline
• Initiate follow-up calls with prospective and existing clients to build relationships, address needs and advance opportunities through the sales cycle
• Assigned to special projects or initiatives on an as-needed basis
• Organize and/or present relevant technical-based presentations to customers, engineering firms and other market influencers or stakeholders
• Execute market strategies to strengthen Calgon Carbon’s position versus the competition
• Conduct activities in accordance with the marketing plan and sales strategies for assigned customer and market responsibilities
• Actively participate in training activities
   

Qualifications

• A Bachelor's degree (B.A. or B.S.), or equivalent from four-year college or university is required
• An MBA is preferred
• 7-10 years of Technical Sales Experience is required
• Experience in chemical manufacturing/industrial sales is preferred

More about Calgon Carbon, A Kuraray Company 

We are a company of scientific innovators with over 205 patents. For over 75 years, we’ve been innovating solutions to the world’s emerging challenges. Since creating the first activated carbon products from bituminous coal in the 1940s, Calgon Carbon has been a pioneer in developing advanced products, systems and services for air and water purification. Calgon Carbon’s product portfolio now encompasses more than 700 direct market applications. 

Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,350 people and operates 20 manufacturing, reactivation, innovation and equipment fabrication facilities in the U.S., Asia, and in Europe, where Calgon Carbon is known as Chemviron. 

Calgon Carbon was acquired by Kuraray in March of 2018. With complementary products and services, the combined organization will continue to focus on providing the highest quality and most innovative activated carbon and filtration media products, equipment, and services to meet customer needs anywhere in the world. 

Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

PIa0921025d61c-3631

Position Summary:

Who we are: AGSE is a recognized leader in the design and manufacture of aerospace ground support equipment, serving the world’s top aerospace organizations. We are in the midst of a cultural transformation, moving from tribal knowledge and manual reactive processes to a data-driven, standardized, and continuously improving operation. This is your chance to join a team that is committed to real change, not just “checking the box” on Lean.

What You’ll Do: You will be an active partner in driving our transformation—building systems, not just projects. Your focus will be on embedding continuous improvement as a mindset at every level, not just as a set of tools. Your day-to-day will combine process analysis, hands-on problem solving, cross-functional coaching, and project execution, with a direct line to senior leadership.

You won’t just analyze; you’ll implement, teach, and sustain.

Responsibilities: Essential Duties:

· Lead Improvement Projects: Identify, plan, and execute high-impact Lean, Six Sigma, and digital transformation projects focused on operational bottlenecks (quality escapes, long prep times, inefficient assembly, etc.).

· Drive Standardization: Document tribal knowledge into robust SOPs and work instructions; pilot and roll out digital work instruction tools and visual management boards.

· Coach & Train: Deliver hands-on Lean/CI training for operators, leads, and supervisors, focusing on practical skills (problem solving, process mapping, visual management, mistake-proofing, etc.).

· Data-Driven Action: Design meaningful KPIs, collect and analyze shopfloor data (scrap, rework, cycle times, downtime, OTD, etc.), and implement root cause analysis and countermeasures.

· Champion Digital Tools: Work with AI, automation, and analytics tools (Power Automate, ERP integrations, Excel, Power BI) to move the factory toward a paperless, digitally enabled environment.

· Facilitate Change: Run kaizen events, lead daily/weekly Gemba walks, facilitate feedback loops, and support the development of a true continuous improvement culture.

· Collaborate Across Functions: Partner with Quality, Engineering, Production, and Supply Chain to drive cross-functional initiatives and standardize processes.

· Tackle Real Problems: Address recurring issues like final inspection escapes, part marking accuracy, FOD/scratches, material flow, and inefficiencies in manual-heavy processes.

· Measure and Report Savings: Continuous improvement impacts in terms of dollars saved, hours reduced, and risk mitigated; report out to leadership and stakeholders.

Work Location: Santa Fe Springs, CA. 100% Onsite work. No remote nor hybrid availability for this role.

Expertise: Knowledge & Skills:

· 3+ years of hands-on experience in a Lean/Continuous Improvement, manufacturing, or operations engineering role.

· Strong working knowledge of Lean Manufacturing (5S, Value Stream Mapping, SMED, Poka-Yoke, Visual Management), Six Sigma (DMAIC, root cause analysis), and process mapping.

· Track record of driving real improvements, measurable cost savings, cycle time reductions, quality improvements.

· Experience creating and implementing Standard Work, SOPs, and operator-level training.

· Familiarity or experience with digital tools for shop floor (Power BI, Excel, Power Automate, digital checklists, etc.).

· Excellent communication, coaching, and facilitation skills; able to work at all levels from shop floor to leadership.

· Highly self-motivated, able to work with minimal supervision, and thrives in a dynamic, hands-on environment.

· Certification in Lean, Six Sigma (Green/Black Belt), or equivalent experience is highly preferred.

Nice to Have

· Experience supporting or leading ERP transitions (Epicor, Global Shop, etc.).

· Exposure to AI, automation, or advanced manufacturing technologies.

· Background in aerospace, heavy fabrication, or complex assembly environments.

· Experience implementing digital work instruction systems or MES.

· Knowledge of ISO 9001/AS9100 QMS requirements.

Required:

· Bachelor’s degree in: Bachelor’s degree in Industrial, Manufacturing, Mechanical Engineering or related technical field.

· Manufacturing engineering experience a must

· Six Sigma Black Belt, Lean, Quality, or other related certification preferred.

· Onsite role. No hybrid nor remote work available for this role

· Ability to work non-standard schedule as needed.

Physical Demands:

While performing the duties of this job, the employee is regularly required to sit and talk or listen. The employee frequently is required to use hands to handle or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

• Noise Intensity: Moderate
• Occasionally: Office environment, Production/manufacturing environment, Warehouse environment

Pay Range: $90,000 - $120,000 plus a discretionary bonus.

While a Company bonus is not guaranteed, this position’s maximum bonus percentage range can be up to 10% of base salary.

Company bonuses are not guaranteed and are based on your performance, the department’s performance and/or the Company’s financial results.

AGSE is required by law in certain jurisdictions to include a pay scale in the job posting for this position. "Pay scale" means the salary or hourly range that AGSE reasonably expects to pay for this position; it is neither a promise nor a guarantee of the compensation that the successful candidate will receive. The pay scale for this position considers the wide range of factors that AGSE considers in making compensation decisions, including, without limitation: skill set, experience, and training, licensure and certifications, and other business and organizational needs. Please note that it is not typical for AGSE employees to be at or near the top of the pay scale for their role - especially as a new hire - and compensation decisions are dependent on the facts and circumstances of each case.

Job Type: Full-time

Pay: $90,000.00 - $120,000.00 per year

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Referral program
• Tuition reimbursement
• Vision insurance

Work Location: In person

Makita is a worldwide leader in the professional power tool industry. Over the past 100 years, we have built a reputation for using the finest raw materials, the most advanced manufacturing equipment, and the most rigorous quality testing in the industry. Headquartered in La Mirada, CA, Makita U.S.A., with offices in Reno, NV, Wilmer, TX, and Flowery Branch, GA, has brought Makita's best-in-class engineering advantage to professional power tool users in America since 1970.

Job Summary:

The Product Manager is responsible for developing and executing product strategy plans that deliver new innovative solutions, achieve sales objectives, and strategically position Makita USA in a leadership role. This position requires a thorough understanding of the market, competition, trades, end user’s needs, applications, business trends, channels of distribution, and product price positioning for their respective category. This individual will be a product leader working cross-functionally to deliver their category vision and strategy for Makita USA.

Salary: $95,000 – $120,000 per year

Essential Job Duties:

Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Manage product development portfolio strategies to include new product development roadmaps and existing product portfolios to align with the company’s vision and objectives.
• Understand product life cycles to create planning processes and timelines to develop new products.
• Manage the overall product development process from ideation to processing the necessary steps and approvals to the implementation and product launch.
• Thoroughly understands primary applications for all related products and accessories while understanding the current competitor’s product strengths, weaknesses, assortments, and marketing strategies.
• Have complete knowledge and assessment of the market, both targeting users and dealer requirements, including current trends, size of the user segments, building code requirements, market opportunities, and geographical strengths to develop strategies to position and develop products that lead the market.
• Establish and employ product innovation positioning with attribute planning that articulates the value proposition to our targeted users.
• Lead/support cross-functional (research) development teams that may include engineering, sales, marketing, logistics, purchasing, outside research firms, and others to develop further new/refreshing products and promotional tactics.
• Responsible for increasing category revenue and profit by developing new products, enhancing products/solutions, implementing promotional activity, and developing/creating sales aids to further build user awareness and brand energy.
• Develop promotional strategies along with the marketing team for new and sustaining products that reinforce the Brand and value to both targeted users and dealers.
• Monitor workflow, milestones, and processes to ensure timelines and deadlines are achieved.
• Deliver product presentations to key customers, trade press, and attend required trade shows.
• Determine annual forecasts and sales budgets for related product categories.
• Strong time management, project management, and strategic planning skills while having a clear vision of the “big picture”.
• Support the quality improvement process by working closely with the QC team by assisting at the field, service, and user levels.

Skills Required:

• Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.
• Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control.
• Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings.
• Teamwork - Exhibits objectivity and openness to others' views; Contributes to building a positive team spirit; Supports everyone's efforts to succeed.
• Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness.
• Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethics; Upholds organizational values.
• Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Develops realistic action plans.
• Adaptability - Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
• Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan.
• Marketing experience, including advertising, copy development, working with graphic designers, etc.
• Product management experience, including launching products, ideally in a related industry, such as construction or building products.
• Strong familiarity with power tools, perhaps as a contractor or trades professional, or at a manufacturer or retailer of power tools.

Supervisory Responsibility:

This position does have supervisory responsibilities.

Work Environment:

This position will sometimes work in an open office setting that is quiet and fast-paced and fosters continuous learning while operating under high demand/volume. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines.

Travel:

40% travel may be required for this position, which includes overnight stays in some cities where events are being held.

Education and/or Experience Desired:

• Bachelor’s Degree from a college or university, or equivalent professional institution.
• Master’s degree in marketing, Business, or related discipline preferred.
• We will also consider non-degreed candidates with significant and highly relevant experience.
• 5+ years in product management or similar industry experience.
• Previous experience with both retail and distribution channels is preferred.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Required to regularly use hands to finger, handle, or feel; reach with hands and arms; and talk or hear.
• Required to regularly stand; walk; and stoop, bend, or reach above head.
• Required to frequently sit.
• May be required to occasionally lift, push, or pull up to 75 pounds.
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Able to ascend and descend stairs.
• Continuously reach out to sort miscellaneous items.
• Physically & mentally able to work in an environment that may be subjected to strict deadlines and multiple projects.
• May be subjected to working extended and/or irregular hours.

Our Benefits Include:

Health & Wellness

• Medical, Dental, and Vision insurance options after 30 days of employment
• Flexible spending accounts (FSA) & Health Savings Accounts (HSA)
• Employee assistance program (EAP) for mental health and well-being
• Paid subscription to Headspace and 5 other members of your choice

Financial Security

• Competitive pay & performance-based incentives
• Company branded vehicle provided
• 401(k) retirement plan with company match
• Basic Term Life insurance is 100% company paid
• Long-term Disability Coverage 100% company paid
• Disability Coverage
• Voluntary Coverage: Critical illness, accidental, hospital indemnity, whole life, and supplemental life plans.

Work-Life Balance

• Paid time off (vacation, sick leave, and 13 paid holidays)
• Employee discounts on Makita tools and accessories - because we know you love quality tools!

Join Makita USA and power up your career with a company that values innovation, teamwork, and excellence!

Explore Opportunities & Apply Today!

Disclaimer:

This description is based on management's assessment of the requirements and functions of the job as of the date this description was prepared. It is a general guideline for managers and employees, but it does not intend to be an exhaustive list of all of the elements of the job. Management reserves the right to modify the description at any time, or to vary the duties and responsibilities of the job on a temporary or indefinite basis to meet production, scheduling, or staffing needs.

Equal Opportunity Statement:

The Company is an equal opportunity employer and makes employment decisions based on merit. Company policy prohibits discrimination based on race, color, creed, sex, religion, marital status, age, gender, national origin, ancestry, physical disability (including HIV and AIDS), mental disability, veteran status, military service, pregnancy, childbirth or related medical condition, genetic information, medical (including genetic characteristics or cancer diagnosis), actual or perceived sexual orientation, or any consideration protected by federal, state or local laws. All such discrimination is prohibited. Additionally, the Company will provide registered domestic partners with all rights and benefits as required by Law. The Genetic Information Nondiscrimination Act of 2008 (GINA) prohibits employers from requesting or requiring genetic information of an individual or a family member of the individual. The Company is committed to complying with all applicable laws and providing equal employment opportunities.

Field Superintendent

We have an immediate opportunity for an experienced Construction Field Superintendent with Underground Power experience in the Los Angeles area. Ability to complete construction projects by performing the following duties personally or through subordinate supervisors, field staff, and sub-contractors.

Essential Functions/Responsibilities:

• Directly oversees job site personnel and subcontractors engaged in planning and executing work schedules and coordinating various phases of construction to prevent delays
• Works with Project Manager and Scheduler in the development and refinement of the project schedule to keep the schedules properly updated and see that the job meets the completion date while meeting budget
• Responsible for approving all expenses for each assigned job; ensure they are applied to the proper job and phase code
• Studies specifications to plan procedures for construction on basis of starting and completion times
• Orders procurement of tools and materials to be delivered at specific times to conform to work schedules
• Inspects work in progress to ensure that workmanship conforms to specifications and the adherence to construction schedules
• Prepares or reviews reports on progress, materials used, costs and adjusts work schedules as indicated on reports
• Completes Daily Field Production Reports on a daily basis
• Monitors contract compliance for each job to ensure the company is protected regarding liabilities matters and liens
• Required to participate in resolving labor disputes and related negotiations are required
• Responsible for obtaining signed change orders when appropriate and submitting to their Managers and Accounting for processing
• Provide directions to the A/R department to ensure invoices are properly and timely created
• Ensures company employees and subcontractors are adhering to the company safety policy

Qualifications and Experience

• Four-year degree in Engineering, Construction Management, or Business Administration preferred
• 10 plus years of Construction knowledge and experience working in the capacity of a General Foreman or Superintendent in Underground Utility Installation
• Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; develops alternative solutions; works well in group problem solving situations; uses reason even when dealing with emotional topics
• Writes clearly and informatively; edits work for spelling and grammar; varies writing style to meet needs; presents numerical data effectively; able to read and interpret written information
• Manages difficult customer situations; responds promptly to customer needs; solicits customer feedback to improve service; responds to requests for service and assistance; meets commitments
• Speaks clearly and persuasively in positive or negative situations, listens and gets clarification, and responds well to questions
• Current First Aid/CPR/AED, company willing to certify
• OSHA 30 certification a plus, company willing to certify
• Proficient with Microsoft Office and other basic computer skills
• Excellent communication skills and ability to work well with others
• Southern California Edison experience required

Must be able to pass a drug and background

Valid California driver’s license

Benefits and company vehicle provided

(Superintendent, General Foreman, Excel, Underground Utilities, Edison, Transmission, Distribution, SCE)

Job Summary:

Bernards is seeking new, dynamic Employee-Owners who are committed to the overall Mission, Vision, and Core Values of Bernards to help build A Better Experience. Our ideal Senior Superintendent candidate will manage and supervise all aspects of field operations for the assigned project from preconstruction through closeout. This includes preconstruction phase activities such as constructability reviews, QA/QC reviews, value engineering, subcontract scoping, site logistics plan and preconstruction schedule management. In addition, manage and supervise all construction phase activities such as project setup, safety management, subcontractor scope review, schedule management, field operations, trade production, subcontractor coordination, labor management, QA/QC management, timely procurement, staff management, client management, risk management, document management, punch list management and project closeout.

Essential Duties & Responsibilities, including but not limited to:

• PRECONSTRUCTION: Assist in the estimating / budgeting process, perform constructability reviews, help develop and manage the value engineering process, assist in the preparation of preliminary schedules and prime contract reviews.

• CONTRACT DOCUMENTS: Clearly understand all documents that make up the "Contract Documents” and enforce/manages the documents.

• AGREEMENTS: Review scope descriptions and ensure they are complete and well-coordinated.

• SAFETY: Ensure that the project site is safe and that the Injury Illness Prevention Program (IIPP) is implemented comprehensively, and all Bernards safety procedures are being followed.

• FINANCIAL MANAGEMENT: Assist the team in presenting major issues of the projection to upper management. Ensure all reasonable efforts have been made to maximize the project fee or minimize losses.

• RISK MANAGEMENT: Assist in ensuring proper insurance is in place and that the project is in full compliance with all Bernards’ risk management policies.

• QA/QC: Comply with the Bernards Quality Management Manual (QMM) outlining our quality policies, standards and procedures.

• SCHEDULING: Responsible for creation of the initial baseline schedule and updating of all subsequent schedules.

• DOCUMENT CONTROL: Ensure that all document control procedures are being followed.

• FIELD MANAGEMENT: Provide overall field operations leadership. Ensure the jobsite is safe, secure and work is progressing in compliance with all OSHA regulations. Ensure the subcontractor’s work is well coordinated in a productive sequence.

• PUNCHLIST: Ensure the punch list process is timely and it exceeds the Owner’s expectations.

• ALL OTHER DUTIES AS ASSIGNED.

Preferred Experience, Education, and Skills:

• Bachelor of Science in Construction Management, Civil Engineering, Architectural Engineering, or related field.
• Over 7 years of construction industry experience managing projects from start-up to completion.
• DSA/Public Works experience is required.
• Project experience ranging from $20M – $90M.
• Excellent written and verbal communication skills.
• Ability to build relationships with team members, industry partners, and clients.
• Ability to efficiently manage time, workload, prioritize and maintain a sense of urgency.
• Ability to handle sensitive, confidential matters.
• High attention to detail.
• Competency in Microsoft Suite (Excel, Word, Outlook, PowerPoint), P6 Scheduling and BIM.
• Strong negotiation skills with industry partners and clients.

About Bernards:

Bernards is a 100% employee-owned, multidisciplinary commercial construction and construction management company with a legacy defined by innovation, technical expertise, and operational excellence. For over 50 years, we have specialized in delivering best-in-class construction services to developers, corporations, educational institutions, and public agencies across a diverse range of sectors.

Who we are is rooted in an unwavering commitment to quality, collaboration, and client satisfaction. These guiding principles enable us to deliver exceptional value, cultivate enduring partnerships, and exceed expectations. By employing a multidisciplinary approach, we craft tailored solutions that address the unique needs of every project. With a steadfast focus on our clients’ goals and an unrelenting attention to detail, Bernards guarantees successful outcomes that stand the test of time.

At the core of our success lies the power of employee-ownership. Each team member shares a vested interest in the success of your project, fueling a culture of dedication, accountability, and innovation. This collective passion drives us to build more than just structures—we build trust, lasting relationships, and a shared vision for communities that thrive.

At Bernards, we don’t just construct; we create legacies grounded in excellence and driven by purpose. By focusing on "Building Better Experiences" for our employee-owners, customers, and industry partners, we empower a future defined by leadership, innovation, and impact.

Building Better Experiences for our employee-owners, customers, and industry partners for over 50 years!

• Driven by our commitment to community enhancement, we build with purpose to create a better tomorrow. This ethos is the cornerstone of our operations and inspires every project we undertake.
• Proudly recognized as a Ruby Certification Champion by the Board of Certified Safety Professionals and honored by the Cal/OSHA SHARP, we set the benchmark for safety excellence, ensuring the highest standards in every project.
• Our Centers of Excellence (COEs) lead the charge in innovation, mastering diverse markets to provide unmatched expertise and custom solutions. We ensure every project is a testament to precision and world- class excellence.

As an Employee-Owner, you’ll experience competitive pay and enjoy comprehensive benefits that include:

• Medical, Dental, and Health Insurance
• Stock Interest in the Employee Ownership Plan
• Health Savings Account
• Flexible Spending Account
• Employer Paid Life Insurance
• 401(k) with employer match
• Open Personal Time Off
• Sick Time
• Paid Holidays
• Tuition Reimbursement
• Employee Referral Bonus
• Employee Assistance Program
• Flexible Work Hours

Bernards is an equal opportunity employer that strives to attain and retain, top diversified talent in the construction industry. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.

For candidates that need reasonable accommodations during the application process, or to perform essential functions of this role, please contact

***We are managing this recruitment process internally and are not engaging external recruiters or staffing agencies for this position. We kindly ask that agencies refrain from contacting us regarding this role.***

Leads day-to-day operations of projects for a general contracting business. Multi-family and senior housing.

PRIMARY DUTIES AND RESPONSIBILITIES:

· Planning and coordination of subcontractors’ work and activities for a project.

· Attend and participate in Safety Training programs and ensures implementation of safety procedures that create a safe and healthy work environment through the job site. Adheres to OSHA safety and record keeping requirements.

· Enforce compliance with project site safety, health, and environmental quality standards.

· Verify subcontractor certificates of insurance.

· Monitor subcontractor personnel to ensure adherence with project plans and promotes quality control of all installations.

· Leads on productivity issues and monitors work performance and productivity of company employees and subcontractors to ensure project plans and schedule are followed and project is executed effectively and within budget.

· Advise senior level management of potential problems, work interference's or schedule difficulties, while assisting in circumventing or mitigating such conflicts. Provides assistance to involved contractors in resolving problems.

· Contributor to development of a thoughtful project pre-plan which includes a CPM schedule, work sequences, manpower utilization, material handling and storage requirements and equipment use.

· Communicate with project team regarding Work Directives, RFI’s, and Material Submittals.

· When requested, interfaces with owner, architect and design professionals to ensure compliance to design intent and owner satisfaction. Facilitates discovery and correction of contract document “errors and omissions” and problem solving to reduce the costs incurred.

· Ensure compliance with all internal and external record keeping requirements, with emphasis on accurate, properly coded employee automated timecards and accurately codes, fully priced material delivery tickets

· Prepare reports, document and complete all punch lists in a timely manner, review all drawings, specifications and subcontractor submittals

· Follow completion schedules and maintain a daily, written log of activities on the jobsite. Logs and reports might include photos and videos

· Use Procore construction management system to perform record-keeping tasks including, composing daily diaries, maintaining project logs and retrieving RFIs, submittal logs and agreements.

· Contribute to building good communications between project management, field engineering, estimating and specialty contractors to ensure construction complies with plans, specifications and company quality standards and that projects are completed on time and within budget.

· Chair or attend pre-job conference, regular subcontractor meetings

· Train, motivate and support subordinate employees in developing their capabilities to further company, project and personal development goals.

· Responsible for continuously expanding and updating professional knowledge and honing training skills to enhance individual and team innovation and productivity.

· Perform additional assignments as directed by supervisors or as required for successful project completion

· Attend and/or lead job meetings and provide thorough reports

· Report to General Superintendent

QUALIFICATIONS:

1. Ability to analyze and develop solutions to complex problems and to communicate effectively with diverse groups required.

2. Advanced knowledge of various construction disciplines, scheduling, cost control, quality control and engineering drawings.

3. Working knowledge of company computer systems, be proficient in MS Office and software necessary.

4. Must have comprehensive understanding of safety regulations and the application of loss control measures.

5. Must be able to read plans and have experience with punch lists.

PHYSICAL DEMANDS AND WORK ENVIRONMENT:

Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 75 pounds. While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud.

This is a full time, salary position. Including health insurance, dental, vision, 401K, paid holiday and vacation time.

Job Type: Full-time / Monday - Friday; some Saturday's required.

Salary: Depends on Experience ($125,000-$160,000); 5 years minimum experience required.

Job Type: Full-time

Piper Maddox has partnered with a leading national electrical contractor and renewable energy EPC to identify multiple Project Managers to support utility-scale solar projects within their rapidly expanding Energy division.

This organization is a long-established engineering and construction firm delivering turnkey energy infrastructure projects across the U.S., including utility-scale solar, battery energy storage systems (BESS), substations, microgrids, EV infrastructure, and complex electrical systems. Backed by a major publicly traded parent company, they offer strong financial stability, national reach, and a significant forward project pipeline.

With more than 6 GW of solar installed or under contract and 2026 projected to be their largest year to date, this is an opportunity to join a high-performing team delivering complex, large-scale renewable projects.

The Role

The Project Manager will oversee the full lifecycle execution of utility-scale solar construction projects, ensuring delivery on schedule, within budget, and aligned with company safety and operational standards.

This is a traveling position. Candidates must be comfortable with long-term assignments and mobility across multiple states depending on project needs.

This role offers strong visibility, leadership responsibility, and direct impact on financial performance and client satisfaction.

Key Responsibilities

• Lead full lifecycle construction management of utility-scale solar projects.
• Oversee planning, execution, financial performance, and closeout.
• Manage budgets, cost forecasting, scheduling, procurement, and productivity tracking.
• Drive project profitability while maintaining strong client relationships.
• Lead high-performing field teams, including union labor where applicable.
• Ensure compliance with safety, quality, contractual, and regulatory requirements.
• Coordinate with subcontractors, vendors, engineers, and internal stakeholders.
• Provide accurate reporting on financial performance, risks, and schedule status.
• Uphold a strong safety-first culture across all job sites.

Qualifications

• 5+ years of experience in solar construction.
• Proven track record managing utility-scale solar projects through full construction.
• Experience with an EPC or solar contractor strongly preferred.
• Candidates from an IPP or developer background will be considered if open to a construction-focused, traveling role.
• Strong understanding of:
• Project cost accounting & forecasting
• Scheduling & procurement
• Productivity tracking & reporting
• Labor management (union experience preferred)
• Bachelor’s degree in Construction Management, Engineering, Business, or related field preferred.
• PMP certification preferred.
• Valid driver’s license and willingness to travel 100%

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

CNM LLP is a technical advisory services firm that works with the top local talent on the most comprehensive and intriguing projects for discerning clients ranging from start-ups to closely held mid-market companies to large multi-national Fortune 1000 firms. The CNM reputation is built upon a foundation of professional excellence and trusted relationships and is recognized nationally for commitment to excellence. Employees value the open and honest environment, consistent focus on work life balance and an outstanding culture that is difficult to find anywhere else in the professional services industry. This unwavering attention to providing an exceptional work environment has enabled CNM to be recognized as a Great Place to Work® for three consecutive years, as well as one of the Best Places to Work in Los Angeles and Orange County.

We are currently searching for a Manager to join our high performing IT Internal Audit Advisory team in Los Angeles. We offer a hybrid (remote/onsite) work environment that will allow you to continue working with the flexibility that they have grown accustomed to over the past year, while also continuing to provide onsite service to our fantastic clients. There is local travel throughout Los Angeles only.

Responsibilities

• Creating system narratives, identifying key controls, and concluding on design and operating effectiveness of key controls
• Assist on the follow IT Internal Audit projects ( IT Strategy, Infrastructure Audits, Data Governance, Configuration Management)
• Advanced knowledge of recognized technology frameworks (COBIT, ITIL, FFIEC, etc.)
• Manage project teams to review and evaluate IT environments, risks, internal audit projects, and compliance
• Experience supporting clients in a co-sourced or fully outsourced IT Internal Audit team
• Manage project teams to review and assess IT environments, risks, internal audit projects, and compliance for companies that range from newly public high growth entities in rapidly changing environments to the largest entertainment and public companies.
• Ensure that our people and teams come first and that our exceptional culture continues to grow our people, providing opportunities for advancement for all team members
• Lead, develop, mentor and train teams
• Recommend internal control solutions that balance client resource constraints with the need to mitigate risk
• Maintain and build strong, collaborative client relationships
• Demonstrating clear and concise writing, and verbal skills to communicate complex issues in simple terms to clients and team members
• Producing quality deliverables evidenced through the need for minimal review time accurate review notes
• Respond to client needs and balance competing priorities with minimal client disruptions, while maintaining project progress

Qualifications

• BA/BS in Information Systems, Computer Science, Accounting, Business, Finance, Economics, Mathematics, Sciences, Engineering or related
• Minimum 5 IT Audit in professional services(Big 4 or mid-tier firm)
• Strong experience with IT Internal Audit
• Demonstrated track record in delivering internal audit advisory engagements to Financial Services clients within a professional services capacity is highly preferred
• Proficient in assessing IT general controls, IT application controls, key reports, and SOC reports
• Desire to pursue CISA, CIA, and/or CISSP (we compensate and reward for attaining these certifications)
• Familiar with industry research boards, standards, and frameworks, (IIA, PCAOB, AICPA, COSO, etc.)
• Able to think critically, maintain logical thought processes, and distill data effectively
• Excellent documentation and written skills, as well as exemplary verbal communication skills

Pay and Benefits

• 40-hour work week
• Training events to ensure CPE compliance
• Medical, Dental, Vision Plans
• 401(k) match
• PTO: 15 days accrued per year
• Company paid holidays, including company shutdown the week between Christmas and New Years
• 3 wellness days
• Various opportunities for peer engagement: quarterly huddles, happy hours, summer and a holiday party
• Monthly mobile reimbursement
• Reimbursement allowances: flex, technology, and health and wellness
• Fully stocked kitchen
• Overtime bonus and Performance bonus in addition to the base pay

CNM LLP offers an excellent base, bonus and incentive compensation package. The benefits package is designed to meet an employee’s needs regardless of the stage an employee is at including medical, dental, paid maternity and parental leave, 401(k) with match and flexible spending accounts for employees and dependents. We offer training that assists employees in reaching their career goals and, in addition to a regular paid time off policy, we also offer an extra five days off between Christmas and New Year holidays annually for firm-wide shut down. CNM believes in social interaction and networking and employees participate in unbelievable social events each summer and winter. The firm also supports employees offering an annual technology bonus, health and wellness bonus, monthly cell phone reimbursement, fully stocked kitchens with food, drink and snacks and much, much more. Please reach out to our talent team and we will walk you through why you deserve a career with CNM LLP.

Please note: all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or protected veteran status, or any other legally protected basis, in accordance with applicable law. We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws.

Company: G2G Ventures Inc, PBC

Job Title: Project Manager, New Product Launches

Location: Hybrid – Santa Monica, CA (3 days per week in office)

Department: Product Development

Reports to: Director of New Product Launches

About Us:

We are a startup revolutionizing beauty with a purpose: create the industry standard of “clean.” Our premium skincare, makeup, and body care formulations combine uncompromising safety, efficacy, and environmental responsibility. And our vision transcends products.

We are committed to inspiring confident women (and others) to recognize their collective power to create meaningful change. Our innovative community-commerce ecosystem connects customers, beauty enthusiasts, and loyalists, allowing each person to align with our brand in ways that authentically reflect their values and aspirations.

From our formulas to our advocacy efforts to our community connection, we lead clean.

About the Role:

The Project Manager, New Product Launches will drive the end-to-end execution of new product development and go-to-market initiatives. Reporting to the Director of New Product Launches, this role serves as the operational engine behind cross-functional product launches — ensuring timelines are met, stakeholders are aligned, risks are mitigated, and deliverables are executed with excellence.

This individual will manage the detailed workstreams required to bring products from concept through commercialization — partnering closely with Product Development, Operations, Supply Chain, Marketing, Creative, Sales, Finance, and external vendors.

The ideal candidate thrives in a fast-paced startup environment, is highly organized, and excels at turning strategy into action.

What You’ll Do:

1. End-to-End Launch Management

• Build and manage comprehensive project timelines from concept to launch

• Define key milestones, dependencies, and critical paths

• Lead weekly cross-functional launch meetings and drive accountability

• Track risks, escalate issues proactively, and propose mitigation plans

• Ensure launches are delivered on time and aligned with business objectives

2. Cross-Functional Coordination

• Partner with Product Development on formulation, packaging, and testing timelines

• Collaborate with Operations and Supply Chain on forecasting, production, and inventory readiness

• Align with Marketing and Creative on campaign assets, messaging, and launch calendars

• Coordinate with Sales on retailer readiness, education tools, and sell-in timelines

• Ensure Finance alignment on costing, margin targets, and launch forecasts

3. Process & Operational Excellence

• Create and maintain standardized launch playbooks, templates, and tracking tools

• Improve workflows to increase efficiency and reduce time-to-market

• Maintain documentation including briefs, timelines, status reports, and post-mortems

• Support capacity planning and resource allocation across launch calendar

4. Vendor & External Partner Management

• Coordinate timelines with packaging vendors, contract manufacturers, testing labs, and creative agencies

• Track deliverables and hold partners accountable to agreed deadlines

• Support contract and SOW execution in partnership with leadership

5. Post-Launch Review & Optimization

• Lead post-launch retrospectives to identify wins and improvement areas

• Track launch performance metrics in partnership with Analytics and Sales

• Implement process improvements based on learnings

You’ll Excel in This Role If You Are…

• Highly organized. You naturally create structure in ambiguity.

• Detail-oriented. Nothing slips through the cracks.

• Proactive. You anticipate risks before they become problems.

• Clear communicator. You drive alignment across diverse teams.

• Execution-driven. You love bringing ideas to life.

• Comfortable with pace. You thrive in dynamic, evolving startup environments.

What You’ll Bring:

• 3–5 years of experience in project management, product development, brand operations, or related fields (beauty, CPG, or retail preferred)

• Proven experience managing cross-functional product launches

• Strong proficiency in project management tools (Asana, Monday, Jira, or similar)

• Excellent organizational and documentation skills

• Ability to manage multiple projects simultaneously with competing deadlines

• Strong interpersonal skills and ability to influence without authority

• Experience in beauty, skincare, or consumer goods strongly preferred

• Bachelor’s degree or equivalent experience

Why This Role Is Exciting:

You’ll play a pivotal role in shaping the future of a mission-driven beauty brand at a foundational stage. Your work will directly impact innovation, speed-to-market, and revenue growth. This is an opportunity to build scalable processes, influence cross-functional collaboration, and help define how clean beauty evolves in the market.

Counter is a people-powered movement that starts with those behind it. We’re building a team that reflects the diversity of the communities we serve, where every individual is respected, supported, and empowered to thrive.

We know that different backgrounds, identities, and perspectives make us stronger, more creative, and better equipped to drive change. That’s why we’re committed to fostering an inclusive culture where everyone belongs.

Counter is proud to be an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity or expression, age, national origin, disability, veteran status, or any other legally protected status. We encourage all individuals to apply and join us in shaping a cleaner, more inclusive future for all.

Syserco Energy Solutions is a turn-key provider of Design-Build energy projects that help customers to lower their operating expenses, modernize their infrastructure and generate renewable energy. Syserco has been named one of the Bay Area’s Best Places to work for 15 consecutive years and we succeed because of our commitment to providing our Customers outstanding service and exceptional value.

THE ROLE:

The Project Manager will be the overall project leader on assigned projects. You will plan and oversee all phases of energy projects with the objective of successful on-time completions within budgets while ensuring that customer satisfaction stays at the highest levels. Projects include a combination of energy efficiency measures and renewable generation installations to help local cities, schools, municipalities, and other customers become more sustainable, save money, and improve services to their end users. The expectation is that you will simultaneously run one or several projects from early development through construction.

You will work with the sales team participating in customer presentations, and you will work with our engineering development team, subcontractors, and consultants to develop cost effective solutions. The role will then transition to a more traditional role managing projects across our portfolio of customers and energy conservations solutions.

The ideal candidate will demonstrate initiative, possess excellent communications skills, and be detail oriented. You must have a genuine passion for building innovative energy reduction solutions and must want to work in a fast-paced, entrepreneurial environment.

MAJOR RESPONSIBILITIES:

Provide constructability review of scopes during project development.

Oversee project deliverables and contractual obligations.

Oversee project team including subcontractors and consultants.

Create, maintain, and manage project schedules, labor plans, and project documents.

Oversee AHJ, DSA, and utility and special inspections to ensure projects receive all necessary permit sign-offs.

Visit active sites to witness and partake in key milestones and ensure progress and quality.

Work with internal and external Procurement resources to contract the project scope across various suppliers.

Develop and maintain multi-month budget/forecasting revenue and payment forecasts.

Manage payment terms and balances with customers and sub-contractors.

Create Schedule of Values (SOV) on all assigned projects in order to maintain positive cash flow.

Manage project commissioning and closeout phase including all requirements needed to successfully complete projects.

Overall financially responsible to meet established budget, including change orders.

Provide consistent and clear communication with internal and external customers.

Ensure quality, timeliness and completeness of work performed.

Adhere to Syserco Energy Solutions’ Policies and Procedures, HR, Safety Plan and others.

Customer satisfaction results shall meet or exceed annual performance goal.

SKILLS AND ABILITIES:

Excellent verbal and written communication, interpersonal, and problem-solving skills.

Excellent understanding of construction law and local codes.

Strong analytical and financial management skills.

Proficient with Project Management tools such as MS Project.

Ability to handle multiple projects successfully.

Detailed oriented and organized.

Ability to work independently and unsupervised.

Team-Oriented, comfortable with open communication and collaboration.

PHYSICAL REQUIREMENTS:

Operation of standard office equipment including utilizing pertinent software applications and use of computer equipment for extended periods of time.

May be required to sit, stand, bend, climb and lift, push or carry items less than 50 lbs. around office and on occasion job sites.

Valid CA drivers’ license with ability to drive and operate a vehicle is required.

Willing to travel, according to project requirements – California only.

QUALIFICATIONS AND EXPERIENCE:

5 or more years of industry experience.

Undergraduate Degree in Construction Management or Engineering preferred.

Strong understanding of Renewable Technology, Building Envelope, HVAC, Lighting, and electrical / mechanical systems.

• 
  
• 3-5 yrs experience - Bachelor's Degree in Business, Management, Engineering or related field, or an equivalent combination of education, training, and experience.
  
• Typically possesses one to three years of experience coordinating or managing small to medium projects or product workstreams.
  
• Working knowledge of project management methodologies, tools, and techniques.
  
• Demonstrated ability to gather requirements, support development of project plans, manage schedules, track progress, and contribute to the execution of defined deliverables.
  
• Proven ability to problem-solve, anticipate issues, maintain documentation, and operate effectively under moderate time constraints.
  
• Strong written and verbal communication skills, including the ability to interact with cross-functional teams and communicate status updates to various audiences.
  

• 
  
• Bachelor's Degree
  

• 
  
• For safety work plan projects, the Project Manager is responsible for budgeting, planning, measuring, monitoring, executing, and reporting on these initiatives to ensure they are managed consistently and effectively.
  
• The role involves collaborating with other organizational units to drive efficient project execution, fostering strong relationships with stakeholders, and maintaining rigorous project management practices.
  
• Additionally, the Project Manager oversees financial tracking, benefit realization calculations, and performance reporting, while providing timely updates and presentations to executive and senior leadership to ensure safety objectives and strategic goals are met.
  

• 
  
• A successful project manager brings over seven years of experience leading cross-functional teams and overseeing complex projects.
  
• This role demands exceptional verbal and written communication skills, as well as proficiency in budgeting, cost analysis, and sound decision-making.
  
• Project managers must possess a thorough understanding of company policies and distribution procedures, using data-driven strategies to plan, monitor progress, and implement corrective actions when needed.
  
• Familiarity with formal project management methodologies, including scheduling, risk assessment, and resource allocation, is essential.
  
• In addition, strong interpersonal abilities, a dedication to teamwork, and a commitment to confidentiality are vital.
  
• Effective project managers are skilled in change management and demonstrate integrity, self-awareness, and adaptability at every stage.
  
• Beyond these core competencies, knowledge of distribution operations and related business practices is highly valued.
  
• A creative approach to problem-solving and engaging team members can make a significant difference, as does the ability to foster a positive work environment.
  
• In summary, the ideal project manager blends leadership experience and technical expertise with robust people skills.
  
• Their success hinges on project management mastery, clear communication, flexibility, and integrity, complemented by strengths in distribution operations and motivating teams to achieve shared goals.
  

Arrowhead Talent Solutions is helping a growing aerospace and aviation manufacturing company find a Manufacturing Operations Supervisor in Fullerton, CA.

**Must be a US Citizen**

**Must have experience with CNC Machines**

• Lead first-shift manufacturing operations for a large production team, ensuring safety, productivity, and on-time delivery.
• Manage daily production activities including scheduling, staffing, training, and performance management.
• Drive operational efficiency through process improvements, cross-functional problem solving, and 5S initiatives.
• Partner with engineering, quality, and maintenance to resolve production issues and improve product quality.
• Conduct performance reviews and support hiring, development, and retention of team members.

Qualifications

• 6+ years of manufacturing leadership experience (aerospace or automotive preferred).
• Strong knowledge of CNC machining environments, tooling, and manufacturing processes.
• Ability to read and interpret blueprints and technical documentation.

Locations: Atlanta | Austin | Boston | Brooklyn | Chicago | Dallas | Denver | Detroit | Durham | Houston | Los Angeles | Miami | Minneapolis | Nashville | New York | Philadelphia | Pittsburgh | San Diego | San Francisco | Seattle | Summit | Washington

Who We Are

Boston Consulting Group partners with leaders in business and society to tackle their most important challenges and capture their greatest opportunities. BCG was the pioneer in business strategy when it was founded in 1963. Today, we help clients with total transformation-inspiring complex change, enabling organizations to grow, building competitive advantage, and driving bottom-line impact.

To succeed, organizations must blend digital and human capabilities. Our diverse, global teams bring deep industry and functional expertise and a range of perspectives to spark change. BCG delivers solutions through leading-edge management consulting along with technology and design, corporate and digital ventures - and business purpose. We work in a uniquely collaborative model across the firm and throughout all levels of the client organization, generating results that allow our clients to thrive.

Practice Area

The Corporate Finance & Strategy Practice (CFS) combines rich expertise in corporate strategy concepts with a management methodology designed to create sustainable value-add for BCG clients. Our team provides extensive experience in planning and implementing corporate transactions including merger & acquisition deals and divestitures. We deliver analytic approaches that allow senior management to effectively deal with challenges such as generating growth, managing a portfolio of assets, forming a world-class finance organization, understanding risk, and responding to the way capital markets assess companies today. Taking swift action in turning around and restructuring a business for long-term survival is also part of our offering.

What You'll Do

BCG is looking for an Expert Consultant to join our CFO Excellence team. Our CFOx team partners with CFOs to tackle their most pressing challenges - reimagining finance operating models for peak efficiency, unlocking the power of advanced analytics and AI, and driving transformative value across the organization. With unmatched experience across industries, our team helps finance leaders modernize systems, enhance transparency, and position their finance functions as catalysts for strategic success. Join us to shape the future of finance and make a lasting impact.

As an Expert Consultant, you will be integrated into a BCG team to leverage your deep expertise on projects that reshape finance functions. You will be given end-to-end responsibility for a workstream within a BCG project. You will work closely with clients to understand their issues, create strategies for change, and win buy-in for your recommendations, while also collaborating with colleagues on complex client issues. You will provide deep expertise and insight to clients and help build your expertise area within BCG. A majority of your time will be focused on supporting and executing case work.

The Expert Consulting Track (ECT) is vital to BCG’s ability to successfully meet our clients’ demand for deep expertise and advanced technical capabilities. Experts deliver next-level impact for BCG's most complex and cutting-edge client challenges. Experts focus on developing BCG's thought leadership, commercial capabilities, and intellectual property assets; and their work is essential to our delivery model. Working alongside our traditional and specialty consultants to bring the ‘best of BCG’ to our clients, Experts come from diverse backgrounds, with expertise often gained outside of BCG in industry, academia, or specialized consulting. Consulting work is varied and rigorous, much of it performed at our client sites. Projects can vary in length, size, and location, depending on the client’s challenge. Because our clients operate all over the world, you may travel internationally.

What You'll Bring

• 5+ years of experience in finance across topics such as finance function effectiveness, CFO advisory, FP&A, process and policy, technology, operations, organizational structure and strategy, and/or transformation .
• Previous consulting experience is required.
• Proven experience working on finance transformation programs including: operating model redesign, process re-engineering, technology enablement, shared services, finance technology, budgeting, management reporting and Business Intelligence, core accounting, tax, treasury, internal audit, AI and machine learning.
• Experience in finance technology stacks, process optimization, and data architecture to deliver scalable and efficient solutions.
• Strong consulting skill set with a demonstrated willingness to learn and grow.
• Entrepreneurial, driven, and proactive mindset with a strong work ethic.
• Collaborative working style with a proven ability to team effectively across BCG and with clients.
• Ability to build trust and rapport with clients by deeply understanding their business and challenges.
• Advanced degree in a related field (preferred).

Additional info

What We Offer:

At BCG, we care about our people, and offer best in class benefits to support you personally and professionally including:

• An opportunity to work organically across disciplines and across BCG, we offer a unified and unrivaled opportunity that combines strategic thinking with hands-on applications.
• A unique experience to work alongside a team of passionate and driven problem-solvers with a mission to deliver innovative and valuable digital solutions in a supportive environment.

For U.S. Applicants:

The base compensation for this role is $190,000 in USD.

In addition to your base salary, you will also be eligible for an annual discretionary performance bonus and BCG's Profit Sharing and Retirement Fund (PSRF) contribution. BCG also provides a market leading benefits package described below.

At BCG, we are committed to offering a comprehensive benefit program that includes everything our employees and their families need to be well and live life to the fullest. We pay the full cost of medical, dental, and vision coverage for employees - and their eligible family members.* That’s zero dollars in premiums taken from employee paychecks. All our plans provide best in class coverage:

• Zero dollar ($0) health insurance premiums for BCG employees, spouses, and children.
• $10 (USD) copays for trips to the doctor, urgent care visits and prescriptions for generic drugs.
• Dental coverage, including up to $5,000 (USD) in orthodontia benefits.
• Vision insurance with coverage for both glasses and contact lenses annually.
• Reimbursement for gym memberships and other fitness activities.
• Fully vested retirement contributions made annually, whether you contribute or not.
• Generous paid time off including vacation, holidays, and annual office closure between Christmas and New Years.
• Paid Parental Leave and other family benefits such as elective egg freezing, surrogacy, and adoption reimbursement.

*Employees, spouses, and children are covered at no cost. Employees share in the cost of domestic partner coverage.

To learn more about our employee benefit please check our Benefits page.

Boston Consulting Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity / expression, national origin, disability, protected veteran status, or any other characteristic protected under national, provincial, or local law, where applicable, and those with criminal histories will be considered in a manner consistent with applicable state and local laws.

BCG is an E - Verify Employer. Click here for more information on E-Verify.

A leading GC operating in the QSR sector are expanding their Preconstruction team and seeking an experienced Estimator to support our pipeline of fast-paced, high-quality commercial projects.

About the Role

• You will be responsible for preparing detailed and accurate cost estimates by reviewing plans, specifications, and project scopes.
• You’ll play a key role in helping us deliver successful remodels, tenant improvements, and ground-up builds across the Western U.S.
• I am especially interested in candidates with fast-food/QSR and retail/convenience store project experience, including work with major brands such as McDonald’s, Chick-fil-A, Chipotle, and Raising Cane’s.

To be considered for the role you must have:

• Proven experience as a Construction Estimator in commercial construction.
• Strong understanding of remodel, ground-up, and T.I. (tenant improvement) projects.
• Experience with fast-food/QSR and retail/convenience store construction is a strong plus.
• Ability to read and interpret architectural/engineering drawings with accuracy.
• Strong communication and organizational skills with the ability to manage multiple concurrent estimates.

If you thrive in a dynamic environment and enjoy the challenge of producing accurate, competitive bids, we’d love to talk to you.

As we continue to enhance our digital customer experience, we’re seeking a dynamic temporary Ecommerce Manager to lead key growth initiatives across our ecommerce website.

The temporary Ecommerce Manager will be responsible for owning key strategic areas of our digital business, including but not limited to: planning and executing site content on Shopify, optimizing the online customer journey including reporting, and driving impactful digital promotions and campaigns. This role is ideal for someone who thrives in an entrepreneurial environment, who can lead strategy development and execute creatively to deliver results.

Essential Job Functions & Responsibilities:

• Lead the strategy, optimization, and performance of the Windsor eCommerce homepage in addition to key digital touchpoints across
• Oversee daily content updates and overall site experience in partnership with product, UX, customer service and engineering teams
• Drive KPIs around site engagement and conversion while delivering ongoing analytics reporting and actionable insights
• Collaborate with merchandising, design, SEO and marketing teams to leverage site content, identify opportunities and optimize on-site incentives
• Develop and deliver seamless omnichannel promotions in partnership with buying, marketing and customer service teams
• Manage on-site discount code creation, execution and maintenance alongside sitewide promotional initiatives
• Lead cross-functional efforts to monitor, report on and improve page speed and overall web performance, driving higher conversion, stronger search visibility, and an enhanced user experience
• Partner with our third-party returns vendor to optimize the online customer returns experience
• Own the brand protection initiative in partnership with our third-party vendor to identify and remove counterfeit listings and fraudulent websites
• Analyze eCommerce trends and competitor insights to guide best practices and support strategic planning for

Key Qualifications & Requirements:

• Business or Communications related degree
• Fashion retail or DTC brand experience
• Minimum 5+ years experience in a fast-paced, ecommerce business, with direct experience managing site content
• Must have hands-on experience using Shopify Plus

• Strong analytical skills, with proven experience working with reporting and analyzing data to drive results
• Strong market research skills & a knowledge of the fashion industry
• Strong writing &presentation skills
• Experience leading projects and working collaboratively across departments
• Proven experience driving change and innovation online
• Ability to multitask and meet deadlines, whilst maintaining close attention to detail

Physical/Environmental Demands and Overtime & Availability

Work is performed in an office environment and requires the ability to operate standard office equipment and keyboards. Must have the ability to walk short distances. Sedentary work. Exerting up to 10 pounds of force occasionally and/or a small amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects. Repetitive motion. Adequate movements(motions) of the wrists, hands, and/or fingers. Team members are required to have close visual acuity to perform activities such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading.

*

Job descriptions are merely a summary of the position. Duties and responsibilities are subject to change and may include any other that management finds necessary to successfully maintain business operations.

WINDSOR EQUAL OPPORTUNITY EMPLOYER

At Makita USA, we believe our employees are the driving force behind our success. That’s why we offer a competitive and comprehensive benefits package to support your health, financial well-being, and professional growth. When you join Makita, you become part of a dynamic, innovative, and team-oriented culture that values hard work and dedication.

Makita is a worldwide leader in the professional power tool industry. Over the past 100 years, we have built a reputation for using the finest raw materials, the most advanced manufacturing equipment, and the most rigorous quality testing in the industry. Headquartered in La Mirada, CA, Makita U.S.A., with offices in Reno, NV, Wilmer, TX, and Flowery Branch, GA, has brought Makita's best-in-class engineering advantage to professional power tool users in America since 1970.

Salary $85,000 - $100,000 annually

Job Summary

Makita is the innovation leader in power tools, equipment, and accessories – so join the team at our U.S.A. headquarters in Southern California and help us make the Makita Advantage come alive at trade shows and events across the U.S.A.

As the Trade Show Manager, you will take a leading role in planning, coordinating, and executing trade shows and events to reach our target audiences, including pro-contractors, hardware dealers/distributors, and the media. You will help communicate the Makita Advantage to these audiences by creating and executing event plans that include compelling signage and graphics, hands-on product demonstrations, dynamic display structures, efficient lighting, effective lead collection, and more.

Areas of focus will range from budget and calendar planning to asset co-design and sourcing, inventory management, and hands-on activity, including booth set-up and on-site management at select events.

Across categories, Makita products have leading power and performance but with lower noise, less vibration, reduced weight, and superior ergonomics. This combination of performance and comfort is unique in the category, giving users of all types – from pro contractors to DIYers – a complete solution that helps get work done faster and more efficiently. Join our team and be a part of this exciting innovation story.

Essential Job Duties

• Work with the senior communications manager as well as product management, channel marketing, brand marketing, operations, and senior management on a full range of trade show activities. This will include live trade shows in major convention venues.
• Build the annual Makita U.S.A. trade show calendar and budget.
• Work with our off-site logistics partner to manage and track asset inventory and display tool inventory for use at trade shows. This includes inspection and inventory reconciliation as well as routine maintenance and repairs.
• Collaborate with in-house marketing staff and vendors to build booth assets, including structures and signage.
• Work with the in-house product management team (and occasionally outside vendors) to create demonstrations of key Makita products.
• Create effective lead collection tactics at trade shows.
• Coordinate show orders and shipping for select events.
• Coordinate on-site details for select events, including shipping and receiving, staffing, and set-up.

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Skills Required

• Familiarity with best practices in trade show booth construction, including lighting and graphics.
• Basic inventory management of trade show assets.
• Building and managing a budget.
• Post-event actions, including reviewing and approving show invoices.
• Strong ability to proactively coordinate numerous projects while maintaining follow-up and follow-through skills.
• Strong attention to detail.
• Ability to calculate figures and amounts such as discounts, percentages, and area. .
• Ability to read, analyze, and interpret general business periodicals, technical procedures, or trade show regulations.
• Ability to write reports, business correspondence, and procedure manuals (e.g., booth set-up instructions).
• Ability to effectively present information and respond to questions from groups of managers and vendors.
• Ability to learn: Obtain knowledge and understanding of our power tools, competition, target professional users, the product applications, and the types of dealers that support the users.
• Presentation skills: Organize information and present to both internal and external audiences.
• The ability to work under pressure and with constantly changing priorities
• Experience in executing a trade show booth “from the ground up”, including arranging shipping and on-site booth set-up, as well as ordering and tracking on-site show services.

Supervisory Responsibility

This position does not have supervisory responsibilities.

Work Environment

This position is based full-time in the Makita U.S.A. Home Office in La Mirada, CA.

EVENTS: This position will include indoor and outdoor events. The work environmental characteristics for these events include the following:

• The employee may be exposed to moving mechanical parts and outside weather conditions.
• In rare instances, activity goes into the night and proceeds until completion, rain or shine.
• The employee is occasionally exposed to fumes or airborne particles, as well as risk of electrical shock and vibration. Personal protective equipment is provided, and professional labor is on hand to manage advanced electrical applications.
• The noise level in the work environment is usually moderate. At select trade shows, noise levels are similar to a construction job site. Hearing protection is provided.

Education and/or Experience Desired

• Five to ten years of related trade show and event experience in venues including convention halls.
• Experience in executing a trade show booth “from the ground up”, including arranging shipping and on-site booth set-up, as well as ordering and tracking on-site show services.

Travel: The expected travel for this role is up to 15%.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

• The employee is regularly required to stand, walk, use hands to handle or feel, reach with hands and arms, and talk or hear. The employee is frequently required to sit and stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance.
• The employee must regularly lift and /or move up to 20 pounds, frequently lift and/or move up to 40 pounds, and occasionally lift and/or move up to 50 pounds.
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.
• The employee must be able to safely operate a moving vehicle per our company policy.
• Occasional extended hours are expected to complete assembly or take-down activities on-site during trade shows and events, as well as in the office.

Our Benefits Include:

Health & Wellness

• Medical, Dental, and Vision insurance options after 30 days of employment
• Flexible spending accounts (FSA) & Health Savings Accounts (HSA)
• Employee assistance program (EAP) for mental health and well-being
• Paid subscription to Headspace and 5 other members of your choice

Financial Security

• Competitive pay & performance-based incentives
• 401(k) retirement plan with company match
• Basic Term Life insurance is 100% company paid
• Long-term Disability Coverage 100% company paid
• Disability Coverage
• Voluntary Coverage: Critical illness, accidental, hospital indemnity, whole life, and supplemental life plans.

Work-Life Balance

• Paid time off (vacation, sick leave, and 13 paid holidays)
• Employee discounts on Makita tools and accessories - because we know you love quality tools!

Join Makita USA and power up your career with a company that values innovation, teamwork, and excellence!

Explore Opportunities & Apply Today!

Disclaimer:

This description is based on management's assessment of the requirements and functions of the job as of the date this description was prepared. It is a general guideline for managers and employees, but it does not intend to be an exhaustive list of all of the elements of the job. Management reserves the right to modify the description at any time, or to vary the duties and responsibilities of the job on a temporary or indefinite basis to meet production, scheduling, or staffing needs.

Equal Opportunity Statement:

The Company is an equal opportunity employer and makes employment decisions based on merit. Company policy prohibits discrimination based on race, color, creed, sex, religion, marital status, age, gender, national origin, ancestry, physical disability (including HIV and AIDS), mental disability, veteran status, military service, pregnancy, childbirth or related medical condition, genetic information, medical (including genetic characteristics or cancer diagnosis), actual or perceived sexual orientation, or any consideration protected by federal, state or local laws. All such discrimination is prohibited. Additionally, the Company will provide registered domestic partners with all rights and benefits as required by Law. The Genetic Information Nondiscrimination Act of 2008 (GINA) prohibits employers from requesting or requiring genetic information of an individual or a family member of the individual. The Company is committed to complying with all applicable laws and providing equal employment opportunities.