Engineering Jobs in Los Angeles Remote
402 positions found
As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.
The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.
The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.
As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.
The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.
Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.
Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.
Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.
Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.
Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.
Ability to provide project management reports as required, support senior level and customer reviews as necessary.
Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.
Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.
Ability to participate or lead in the product development process including design reviews.
5 to 10% Travel required.
Must have Secret Security Clearance or be able to obtain a US security clearance.
Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.
Viewed as an expert and/or resource within the field by peers in and outside the organization.
Bachelor’s Degree and a minimum of 9 years of prior relevant experience.
Graduate Degree and a minimum of 7 years of prior related experience.
In lieu of a degree, a minimum of 13 years of prior related experience.
Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.
5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.
6 years’ strong experience with receiver, Antenna, or Radio design (i.e.
RF).
4 years’ experience with embedded Hardware design.
2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.
Preferred Additional Skills: Strong familiarity with GPS Module design and topology.
Advanced with High-speed Analog design methodologies.
Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.
Familiar with FPGA design methodologies.
Proficient with DO-254 design.
In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.
The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.
This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.
L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.
The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
Airframe: Pilatus PC12
15,000 Sign-On Bonus (Must Complete Training and Check Ride).
~40,000 Retention Bonus (There is a 6 Month Waiting period and This is a 3 Year Program).
~ No Training Contract.
~ Paid Crew Housing.
~ Company Paid ATP-CTP (If not already completed).
~ Up to 3,000 in Relocation Assistance.
We’re hiring a Fixed Wing Pilot to provide medical air transportation services to our customers. This pilot will be qualified to fly our PC12 aircraft. Scheduled shifts run 14/14 and service day or night trips. therefore, all of our pilots work on a quality, professional team that are committed to high safety standards for the crew and our customers.
Pilot will work with a team of medical experts to safely transport customers to and from locations and facilities.
Ensure aircraft readiness for flight dispatches as described in the appropriate manuals, including all FAR and company requirements, and aircraft cleanliness duties.
Maintain accurate company and regulatory documentation and record keeping for shifts, load manifests, etc.
Effectively communicate and collaborate with both air and ground dispatch, flight crews, facilities and partners.
Provide shift change info to transitioning pilot and team, and follows protocols for recording company change board details.
Pilots are accountable to maintain required certifications and ongoing ground and air training.
Commercial Airplane Single Engine Land (C-ASEL) Required.
~ The ideal candidate will have single pilot IFR experience.
~ Current FAA First- or Second-Class Medical Certificate.
~100 Night hours.
~Minimum of a High School Diploma, GED equivalent, or higher.
Must be able to work night, day, and overnight shifts as assigned.
May need to de-ice the plane, assist with towing the aircraft and maneuvering in and out of the hangar, prep the plane for flight.
As a leading provider of air medical services, management and experience in the air medical industry, Guardian Flight is one of Global Medical Response ’s (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. GMR’s Core Behaviors— keep care at the center, raise your hand, seek to understand, find a way together and be accountable—unite our teams and set us apart in emergency medical services.
Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability.
More Information about this Job: Check out our careers site to learn more about our benefit options.
My client is used to complete exciting projects for the world’s most notable brands—including Chanel, Apple, Cartier and many more. When you join this firm, you join one of the most well-respected commercial construction management firms in the nation.
As part of their growth plans, they are looking for a Project Manager who will be responsible for all phases of the project, from pre-construction to final close out, ensuring that the project is delivered on time and on budget.
With internal training and necessary support and resources, you will act on your own initiative to manage and complete project planning, scheduling, budgeting and implementation while meeting and exceeding clients' expectations.
Qualifications / Requirements
- Minimum 5 years of project management experience with a general contractor independently managing diverse projects.
- 4+ years' experience in high-end restaurant construction (Ground-up/TI/remodels) is highly preferred.
- Proven experience managing & estimating multiple projects and project teams
- Strong computer skills MS Project, Blue beam, Plangrid, Raken, MS Office software
- Bachelor's Degree - construction management, architecture, engineering or related field.
If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.
MAKS is a globally recognized leader in the rebuilding and restoration of electronic automotive modules, including TIPMs (Totally Integrated Power Modules) and ECMs (Engine Control Modules). These modules serve as the nerve center of modern vehicles, controlling critical electrical and power distribution systems.
At MAKS, we are not simply repairing parts—we are rewriting automotive history by developing reliable aftermarket solutions for complex electronic failures. Our work supports a wide network of consumers, professional mechanics, dealerships, and major retailers who depend on us to diagnose and solve difficult vehicle electrical issues.
Our culture is built on five core values that guide everything we do:
- Trailblazers – We innovate fearlessly in automotive electronics
- Value of Reputation – We earn trust through quality and reliability
- Accountability – We take ownership of our work and outcomes
- Empathy – We support our team and customers
- Evolve or Bust – We continuously improve and adapt
We are currently expanding and hiring Electronics Technicians at our facility in Canoga Park, California.
If you enjoy hands-on electronics work, problem solving, and working with precision tools, this is a great opportunity to grow in a specialized and in-demand field.
Learn more about our work:
and test printed circuit boards (PCBs) containing both through-hole and surface-mounted components
Must-Have Qualifications
- Basic knowledge of electronic components and circuits
- Hands-on experience using soldering irons, hot-air rework stations, and bench tools
- Experience removing and replacing surface-mounted components
- Familiarity with DVMs, oscilloscopes, and other common PCB testing tools
- Ability to perform PCB trace repair
- Strong attention to detail and quality workmanship
Nice-to-Have Qualifications
- IPC or soldering certification
- Degree or training in electronics technology or hardware repair
- Experience working with automotive electronics
- 2+ years of professional electronics repair experience
Position Details
- Schedule: Monday – Friday
- Shift options: Between 7:00 AM – 5:00 PM
- Full-time
- On-site only – Canoga Park, CA
Benefits
- Medical, Dental, and Vision insurance
- Paid Time Off
If you’re passionate about electronics and want to build expertise in a highly specialized field, MAKS offers a unique opportunity to work on the systems that keep modern vehicles running.
At AMCL, a Turner & Townsend Company, you’ll join a global team of thought leaders committed to making a difference to infrastructure and society. If you bring your talent, enthusiasm, and creativity, we’ll help you realize your potential, providing the opportunity to learn, develop and work on our exciting projects happening around the world.
For 75 years Turner & Townsend has been helping to deliver transformational programs across the real estate, infrastructure, and natural resources sectors, making a difference in people’s lives and ensuring a return on investment for our clients and their investors. With 112 offices around the globe, Turner & Townsend is an independent professional services company specializing in program management, project management, cost management and consulting across the real estate, infrastructure, and natural resources sectors.
In 2017, AMCL joined forces with Turner & Townsend. AMCL is recognized as the world’s leading specialist infrastructure, asset management and asset information consultancy. We have built a global reputation for leadership in asset management thinking and on-the-ground delivery. AMCL was founded in 1997 and has worked with over 300 infrastructure organizations globally, across the energy, transportation, and utility sectors. Our teams thrive on the opportunities to share learning and good practice with our clients enabling them to realize true value from the work we deliver. With headquarters in the UK and branches around the globe, AMCL has one of the largest teams of specialist Infrastructure asset management consultants in the world.
AMCL is looking to recruit a Senior Data Asset Management Consultant into the US team. The role will support the delivery of a variety of consultancy and transformation projects for high profile infrastructure organizations across multiple sectors, including transit, power, municipal, ports, and real estate. The role provides an opportunity to work on a variety of projects including asset management capability improvement and implementation projects, asset information projects, and data analytics.
The role will be based on the West Coast; however, there will be the opportunity to support projects throughout the US West Coast. The candidate can sit out of Los Angeles, San Francisco, Portland, or Seattle.
Key Responsibilities
- Work as a Senior Consultant within the delivery team and support the implementation of business transformation projects, including asset management consultancy, training, and data and information projects.
- Work independently, lead, or collaborate with the wider US or global team to deliver the complete lifecycle of asset management transformation projects, from sourcing to project closure.
- Consult with clients in the improvement of their asset management capabilities.
- Lead and manage the delivery of asset management projects and tasks for clients on time, to budget, and in line with the AMCL project governance requirements.
- Identify, manage, and support business development and sales activities, including identifying new opportunities, supporting bid work, writing proposals, and developing presentations.
- Support project management, including tracking budget and schedule, identifying risks and issues, participate in status meetings, and develop monthly progress reports.
- Deliver project work, including but not limited to, facilitating internal and external interviews and workshops, writing reports, and delivering presentations.
- Conduct data analyses, including analyzing complex datasets; identifying trends and insights; and performing descriptive, diagnostic, and predictive and prescriptive analytics.
- Develop financial models, including whole lifecycle cost modeling and analysis.
- Develop and produce asset management artefacts on behalf and in collaboration with clients.
- Contribute to leading thinking on emerging business and asset management topics.
- SOX control responsibilities may be part of this role, which are to be adhered to where applicable.
- Bachelor’s degree in engineering, urban planning, or related fields.
- Minimum of six years of experience performing similar work with or on behalf of an infrastructure organization
- Strong analytical skills, including experience with data analytics and whole lifecycle cost analysis
- Advanced skills in Microsoft Excel (e.g., formulas, pivot tables, VBA, etc.)
- Ability to work autonomously and under minimal direction from project teams to develop high-quality deliverables
- Critical thinker and problem solver, ability to diagnose root causes and apply knowledge and experience to solve problems creatively
- Strong verbal and written communication skills, including the ability to translate complex concepts and findings into clear, concise, and accessible insights
- Strong people and interpersonal skills
- Strong attention to detail and organization skills
- Self-starter, proactive, and takes initiative
- Demonstrates high emotional intelligence and maturity
Preferred Qualifications
- Experience working in a fast-paced management consulting setting, including experience with managing multiple projects/tasks concurrently and delivering projects or tasks on time and to budget.
- Knowledge of relevant asset management guidance and standards, including ISO 55001, the Institute of Asset Management’s Asset Management Anatomy, and the Global Forum for Maintenance and Asset Management (GFMAM) Asset Management Landscape.
- Experience with implementing asset management programs with public sector organizations.
- Experience managing relational databases.
- Experience with extract, transform and load (ETL) (e.g., using SQL queries).
- Knowledge of data visualization tools such as Power BI and/or Tableau.
The salary range for this full-time role is $120,000-$140,000 per year. Ranges are determined by role and level and represent a good faith effort to provide a fair and equitable salary. This range is a reflection of base salary only, not of a total compensation package. Please note Turner & Townsend AMCL reserves the right to pay more or less than the posted range, depending on candidate’s experience and qualifications.
*Qualified candidates with arrest or conviction records will be considered for employment in accordance with LA County ordinance and CA law.
AMCL employees should feel that they are part of a team and that opportunities are always available to them. We provide and encourage:
- Clear mechanisms and arrangements for career progression
- Consistent and open communication, informing the team of new developments and encouraging them to give feedback, suggestions and constructive criticism
- A sense of pride and understanding in the services and products of AMCL and how we communicate and deliver them
- A workplace where AMCL team members feel supported, enabled and rewarded
- A culture that is fair, engaging, enjoyable and provides clear accountability and personal ownership
In turn, we expect all of our employees to exhibit the following core behaviors:
- Make change happen - embraces change, showing initiative and willingness to take responsibility for solving challenges
- Do better every day - focuses on efficient and effective execution to improve performance. Shows determination and resilience to deliver to the highest possible ethical standards
Turner & Townsend does not accept any speculative or unsolicited CV’s that have been sent to our internal recruitment team or hiring managers from agencies outside of our preferred supplier list. Any speculative or unsolicited CV’s will be treated as a direct application.
It is strictly against Turner & Townsend’s policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time.
Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend or AMCL personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorized Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited by the Recruitment Team to submit candidates for review.
Join our social media conversations for more information about Turner & Townsend and our exciting future projects:
Twitter
Instagram
LinkedIn
It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time.
Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Amit, at 224 507 1290 Title: IT Solution Architect (Financial Systems)
- Remote Location: Remote (Candidates local to Corning, NY and Charlotte, NC are preferred.
Open to candidates in other locations; candidates must be willing to work EST time zone) Duration: 12 Months with possibility of extension based on demand.
Schedule: Full-time, M-F, 8 AM
- 5 PM.
Some potential flexibility may be required for after-hours work, as needed.
Travel
- up to 25% for travel to Corning, NY.
Estimated as one week per month based on project need.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Position Summary The IT Solution Architect for Supply Chain and Finance is responsible for designing, developing, and guiding the implementation of enterprise technology solutions that support client's financial and supply chain processes.
This role collaborates closely with business stakeholders and cross-functional IT teams to ensure systems are scalable, secure, and aligned with organizational strategy.
The architect enables operational excellence by shaping solution roadmaps, ensuring platform integrity, and driving continuous improvement across finance and supply chain applications.
Key Responsibilities Solution Architecture and Design Develop end-to-end architectural designs for finance and supply chain systems in alignment with business objectives.
Assess existing application landscapes and recommend improvements, modernization opportunities, and integration strategies.
Ensure solutions comply with security, data governance, and enterprise architecture standards.
Business Partnership and Collaboration Engage with Finance, Supply Chain, and IT partners to understand business needs and translate them into technical requirements.
Participate in recurring strategic and operational touchpoints, including cFIN review sessions and architecture-focused team meetings.
Provide subject matter guidance on financial systems such as OneStream and other platforms influencing client's digital finance ecosystem.
Technical Leadership and Support Serve as the technical lead for solution implementations, enhancements, and integrations across finance and supply chain domains.
Address escalated issues, provide root-cause analysis, and ensure long-term stability of assigned applications.
Partner with engineering and operations teams to ensure solution resilience, performance, and sustainability.
Governance, Standards and Documentation Contribute to the development of architecture standards, design patterns, and best practices.
Maintain accurate architectural documentation, including roadmaps, diagrams, functional specifications, and integration models.
Continuous Improvement and Innovation Evaluate emerging technologies and recommend opportunities to enhance process efficiency, automation, and system capabilities.
Support modernization initiatives that strengthen client's digital transformation objectives in the finance and supply chain organizations.
Required Qualifications
- Education and Experience Bachelor's degree in Information Technology, Computer Science, Engineering, or related field (minimum required).
5 years of experience as a Solution Architect with financial systems.
Proven experience architecting solutions in enterprise finance and/or supply chain environments.
Deep knowledge of financial systems (e.g., OneStream, SAP cFIN (Central Finance), or similar platforms).
Familiarity with SAP finance and supply chain modules.
Strong understanding of systems integration, data flows, and enterprise application ecosystems.
Ability to translate complex technical concepts into clear business language.
Key Competencies Strategic Thinking Ability to design future-focused, scalable solutions.
Technical Expertise Strong architecture and platform skills across finance and supply chain.
Communication and Influence Effectively collaborates with technical and non-technical stakeholders.
Problem Solving Skilled at diagnosing complex issues and proposing durable solutions.
Execution Ability to manage multiple priorities and deliver high-quality outcomes.
Preferred Qualifications Experience working in a global, matrixed organization.
Understanding of data governance, security protocols, and architecture frameworks.
Demonstrated ability to lead collaborative solution workshops and stakeholder discussions.
Interview Process: Two rounds.
First round phone screen with direct manager.
Second round video panel interview, including technical review.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP cFIN, OneStream
Remote working/work at home options are available for this role.
Lead complex construction projects from concept to completion, ensuring timelines, budgets, and quality standards are met. Collaborate with cross-functional teams and contractors to drive results and deliver exceptional builds. If you're a proactive leader with a passion for construction excellence, we want to hear from you.
Company Benefits:
- 13 paid holidays
- Vacation and sick pay
- PPE provided along with annual allowance for boots and prescription safety glasses
- Work shirts provided by company
- Annual appreciation package
- Early performance evaluation opportunities
- Competitive benefits (medical/dental/vision)
- 401k + match
- Company paid life insurance and disability
- Employee assistance program
- Career development opportunities
Responsibilities:
- Planning, organizing, directing, controlling, and evaluating construction projects (HVAC/Refrigeration & Mechanical projects) from start to finish according to schedule, specifications, and budget.
- Preparing and submitting construction project budget estimates, critical path schedules, and quality control programs.
- Planning and preparing construction schedules and milestones, and monitoring progress against established schedules.
- Preparing contracts and negotiating revisions, changes, and additions to contractual agreements with architects, consultants, clients, suppliers, and subcontractors.
- Planning, coordinating, and managing effectively all Foremen, material, and equipment to meet the established budget, schedule, and scope of the projects.
- Preparing progress reports and issuing reports to clients as necessary.
Qualifications:
- Must be able to develop and maintain detailed MS Project schedules (startup-task durations, resource allocations, labor costs, etc.).
- Must be able to maintain multiple complex projects in all varying phases of construction at the same time.
- 2-5 years in industrial piping or Ammonia Refrigeration as a Project Manager.
- Successfully completed multiple large-scale industrial Piping and Ammonia Refrigeration projects for reputable contractors.
- Coaching, mentoring, and teaching project teams.
- Advanced financial management and forecasting experience.
- Excellent oral and written communication skills; must be detail-oriented, self-sufficient, and self-motivated.
- Exceptional planning and organizing skills with the ability to manage a number of projects
Company Profile:
CIMCO specializes in the engineering, design, manufacture, installation and service of complex thermal building solutions for industrial, process cooling and recreational refrigeration and mechanical systems. For more than 100 years, CIMCO's leadership and unparalleled research, development and manufacturing programs has put us at the forefront of industry advancements and technological breakthroughs. Our professional engineers, technicians and designers apply innovative state-of-the-art equipment and refrigerants to develop systems that meet even the most complex thermal challenges.
CIMCO is committed to creating an inclusive environment where people from all backgrounds can thrive. Together, we embrace diversity of thought, experience, and perspective, as we combine our unique skills and capabilities to drive successful outcomes for all stakeholders. As an equal opportunity employer, CIMCO provides accessibility accommodations during the recruitment process. Should you require any accommodation, please let us know and we will work with you to meet your needs.
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.
JOB SUMMARY
Jabil is seeking a Manufacturing Test Development Manager who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.
- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities
JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS:
- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
