Engineering Jobs in Lancaster Los Angeles County Ca Remote

Job Title : Oceanography Category / Component: Officer • Both Overview Oceanography (OCEANO) Officers, also called METOC, are the Navy's geophysical experts who understand and apply all facets of meteorology, oceanography, hydrography, bathymetry, geophysics, and precise time and astrometry.

Their mission is to define and apply the physical environment, from the bottom of the ocean to the stars, to ensure the U.S.

Navy has the freedom of action to deter aggression, maintain freedom of the seas, and win wars.

Key Responsibilities Provide timely and relevant support to fleet and joint operations by leading the collection, processing, prediction, exploitation, and dissemination of environmental data.

Ensure safety of navigation, access to denied waters, freedom to maneuver at will, and increase the lethality of Navy forces.

Lead teams ranging from small 3-4 person deployable units to large commands of over 400 personnel.

Serve as the one-of-one geophysical expert at an operational command.

What to Expect Serve in a variety of challenging operational billets with increasing scope and responsibility, both at sea and ashore.

The career path interweaves sea, shore, and educational tours.

Sea duty may include leading small team detachments on U.S.

and foreign vessels, serving as the embarked OCEANO Officer on an aircraft carrier or amphibious ship, or serving on a Strike Group or Joint Task Force staff.

Shore tours include assignments at major production commands, forecast centers, headquarters, Joint commands, the Navy Data Center, and Naval Research Labs.

Work Environment Assignments are worldwide, including Europe, Hawaii, Asia, and the Middle East.

Work environments range from being at sea on surface combatants, survey vessels, aircraft carriers, and amphibious ships to being ashore at major production commands, forecast centers, headquarters, and research facilities.

Pathways, Training & Advancement Initial training includes the 3-week Information Warfare Basic Course (IWBC) and the 7-week Basic Oceanography Accession Training (BOAT).

Officers may also attend Division Officer Leadership Course (DIVOLC).

Postgraduate education at the Naval Postgraduate School is required for officers at the LCDR level and senior, typically as mid-grade Lieutenants.

Promotions to LTJG and LT occur at 2 and 4 years of service, with competitive promotion opportunities to LCDR, CDR, CAPT, and Flag Officer ranks.

Requires a Baccalaureate degree, preferably in a technical field, with a cumulative GPA of 2.8 or greater.

Must have completed a full college calculus series (I and II) with a minimum 'C' average, and a college-level calculus-based physics series (I and II) with a minimum 'B' average.

A desired degree is in physics, physics-based oceanography, meteorology, hydrography, earth science, engineering, or mathematics.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy as an Officer, including United States citizenship A bachelor's or qualifying professional degree Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores on the Officer Aptitude Rating exam Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Must be qualified for sea duty, world-wide assignable, and eligible for a Top-Secret security clearance.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Position Title: CNC Programmer Location: Montebello, CA 90640, USA Job Category: Manufacturing Req ID: CNCPR001448 Schedule: Full Time Posted:Nov 4, 2025 Job Details Description Close to You Anywhere in the World Groupe SEB is the global reference for small domestic appliances, cookware and professional coffee with its portfolio of 35 emblematic brands such as Tefal, Seb, Rowenta, Moulinex, Calor, Lagostina, Krups, WMF.

Present in 150 countries, we produce in more than 40 industrial sites and sell 11 products per second.

We believe in the richness of diversity and aspire to create an inclusive and stimulating work environment where our more than 30,000 employees can grow and give their best.

SEB Professional is a subsidiary of Groupe SEB.

At SEB Professional North America, we are a leader in the professional coffee machine industry, offering three equipment lines: Schaerer, WMF, and Curtis.

Our innovative coffee machines are trusted worldwide and can be found in a variety of settings, including hotels, restaurants, coffee shops, and convenience stores.

You've likely enjoyed coffee from our machines at McDonald's, Dunkin', Chick-fil-A, Peet’s, or Tim Hortons.

Join us in delivering exceptional coffee experiences worldwide.

What We Will Achieve Together: The CNC Programmer is the Subject Matter Expert and works independently, making decisions related to the interpretation from reading blueprints, translating these into the proper set up of mills, lathes, lasers to accurately set the tolerance limits in support of “just in time” delivery of fabrication to production.

The CNC Programmer acts as a backup to the Supervisor/Manager covering vacation and sick time and the CNC Programmer trains others in the programming and setup for the application of job runs.

Base Salary Range: $30/hr
- $38/hr DOE.

Key Responsibilities Include: Collaborates with engineering on building prototypes Leads and/or Assists in the design and development of machine tooling Proficient in set up and operation of Turrets, Laser, Panel Bender, Safan First article inspection Adjusts machine settings to operate machinery in accordance with established procedures Communicate machine operation or parts defects In collaboration with the Fabrication Manager makes decisions on spending needs for the machine shop equipment Assists Machine Operators answering questions and solving problems Identify tool and die issues and perform repair (sharpening) and replacement of tool & die Observes operation of machine and verifies conformance of formed or cut workpiece to specifications, using measuring instruments, such as fixed gauges, calipers, and micrometers Sources and obtains quotes on machine shop tooling needs Leads and Supports training and preparing bench strength Ensures that all IMS Standards are maintained and followed Has responsibility for scrap control and reduction Review production schedule for turret and laser and maximize sheet metal yield Runs simulations for new routings and bill of materials for costing purposes Maintain cleanliness of workstations Ability to operate electric pallet jack and hand pallet jack Requirements: Experience: Minimum of 3 years of experience in a role with equivalent experience.

Preferably in a fast-paced organization with an international presence.

Manufacturing experience is a must.

Education: High School Diploma.

Certification: CNC Programmer from accredited school/program.

Key Skills: CNC Programming, Blueprint Reading, CAD/CAM Software, Machine Tooling, and Safety Standards.

Core Competencies: Problem Solving, Interpersonal Skills, Action Orientation, Detail Orientation, Effective Communication and Collaboration.

Overview: Type of Employment: Full time.

Non-Exempt Workplace Schedule Type: On-Site (May be required to work weekends) Position Location: Montebello Why SEB Professional North America? Whether working remotely, in one of our offices, or flexing in between, we offer a number of benefits and perks to support you and your family.

Here is a sample of some of our benefits programs: Medical / Dental / Vision Insurance – Generous Employer Contribution 401(K) Retirement Plan w/ up to a 9% employer contribution after 1 st year of employment.

On Site Gym 12 Paid Holidays Voluntary Benefits and Discount programs Equal Employment Opportunity (EEO) SEB Professional is an Equal Opportunity Employer.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other category protected by federal, state, or local law.

SEB Professional does not make employment decisions based on any protected class status.

For more information, please see OFCCP Equal Employment.

PIb2aec8b2dad

Job ID: 410010

Practice area:- IP - Litigation - Computer Engineering,IP - Litigation - Computer Science,IP - Litigation - Electrical Engineering,IP - Litigation - Hard Science General,IP - Litigation - Hardware,IP - Litigation - Mechanical,IP - Litigation - Physics,IP - Litigation - Software,IP - Litigation General

Patent Litigation Attorney (1–3 Years) – IP Litigation & PTAB Matters | Los Angeles, CA

________________________________________

Keywords:- Patent Litigation Attorney, IP Litigation Attorney, Patent Disputes Attorney, PTAB Litigation Attorney, Patent Attorney Los Angeles, Los Angeles legal jobs, Attorney jobs California, CA Bar preferred, Law firm patent litigation associate, Partner-track position, patent lawyer,patent litigation, hard sciences, semiconductor, software litigation, hardware patent, computer science litigation, engineering patent dispute

The opportunities for success await those with stellar academic credentials and solid work experience at this firm. Here, you can work with among the most talented attorneys in the United States who take their work very seriously. The attorneys working here are also exceedingly intelligent and interesting. It is not uncommon for a second- or third-year associate working here to end up ""assuming the lead"" when this firm is involved in litigation matters against other firms. We mean taking control of the case from partners in other firms. The people in this firm are very nice and also very focused on their work. A top-tier law firm is seeking a Patent Litigation Attorney in Los Angeles, CA with 1–3 years of experience. Work on cutting-edge patent disputes, PTAB proceedings, and Federal Circuit matters with early responsibility, strong mentorship, and substantial client exposure.

________________________________________

A top-tier law firm is seeking a Patent Litigation Attorney to join its Los Angeles office. This opportunity is ideal for an early-career litigator with strong academic credentials, patent litigation experience, and an interest in cutting-edge intellectual property disputes. The role offers high-level substantive work, direct client interaction, and the chance to contribute to sophisticated patent matters in a collaborative and progressive environment.

This Patent Litigation Attorney opportunity stands out for its combination of district court patent litigation, Federal Circuit appeals, PTAB proceedings, and related technology-focused disputes. Candidates pursuing Los Angeles legal jobs will appreciate the rare chance to gain meaningful responsibility early in their careers while working alongside exceptionally talented attorneys in a demanding but rewarding practice. This opportunity is actively interviewing and rarely opens at this level.

________________________________________

Key Responsibilities

• Engage in patent infringement litigation in district court and Federal Circuit appeals

• Participate in PTAB proceedings and other patent-focused administrative matters

• Assist with tech transactions and patent-adjacent disputes, including antitrust and trade secret matters

• Contribute to litigation strategy, briefing, depositions, and trial preparation

• Maintain considerable client contact throughout the life of matters

• Work closely with partners and litigation teams on sophisticated intellectual property disputes

• Travel as needed to support clients and case needs across the country

• Support all phases of patent litigation in a fast-paced, high-level practice

________________________________________

Qualifications

• 1–3 years of experience as a Patent Litigation Attorney or similar IP litigation role

• Strong understanding of patent law and patent litigation procedure

• Proven litigation and writing skills

• Juris Doctor from a top-tier law school

• Technical degree or relevant technical work experience preferred

• Admission to the California Bar preferred

• Patent Office registration is a plus

• Excellent client communication and interpersonal skills

• Ability to work collaboratively in a team environment

• Strong academic credentials and solid legal work experience required

________________________________________

Culture & Firm Appeal

This opportunity is with a top-tier law firm known for giving high-performing associates meaningful responsibility early in their careers. Attorneys in this practice work alongside exceptionally talented and focused colleagues on sophisticated, high-stakes intellectual property matters. Candidates exploring Los Angeles legal jobs will be drawn to the firm’s reputation for excellence, the caliber of its attorneys, and the opportunity to work on cutting-edge disputes involving complex technologies.

The firm’s culture combines intensity with collaboration. Associates benefit from close exposure to highly skilled litigators, strong client access, and the chance to take on leadership-level responsibilities earlier than at many peer firms. For a Patent Litigation Attorney seeking a partner-track position, this role offers a rare blend of elite work, accelerated development, and meaningful career upside.

________________________________________

Why This Role Is Unique

• Opportunity to work on district court patent litigation, Federal Circuit appeals, and PTAB proceedings in one role

• Early responsibility and significant client interaction uncommon at the 1–3 year level

• Exposure to patent-adjacent matters such as antitrust, trade secret, and tech transaction work

• Strong fit for attorneys with technical backgrounds seeking deeper IP litigation specialization

• Exceptional platform for associates who want to develop quickly and take on meaningful case leadership

• Rare opening for a partner-track position in Los Angeles legal jobs within a cutting-edge patent litigation practice

________________________________________

Benefits

• Opportunity to work on cutting-edge patent litigation cases

• Early responsibility and client interaction

• Collaborative and progressive firm environment

________________________________________

Call to Action

Apply now for a confidential discussion with a BCG Attorney Search recruiter.

Submit your resume today to learn more about this prestigious Patent Litigation Attorney opportunity.

Explore this elite opening in Los Angeles legal jobs and take the next step toward a partner-track position.

________________________________________

BCG Attorney Search is the industry leader for placing candidates in permanent positions in law firms. Since 2000, our recruiters have placed several thousand attorneys and enjoyed extraordinarily high success rates with our candidates. As a BCG Attorney Search candidate, you have access to more opportunities than any legal placement firm in the United States. We are able to offer the most in-depth insight in the legal recruiting market thanks to our dedicated team of over 150 employees who mercilessly research, study and analyze the legal market. The depth and breadth of our research empowers us to place attorneys at rates that are unparalleled at any placement firm in the United States. Many of our recruiters make 30 to 40 placements per year, while recruiters at competitor firms are likely to make four or five. Unlike other placement firms that can only tell you about openings at major AmLaw firms, we place candidates of all backgrounds in firms of all sizes. While other legal recruiters only represent a narrow band of candidates from top law firms and top law schools, our research, firm contacts, and market insight allow us to place hundreds of candidates each year who do not fit this mold. It is rare that we do not get candidates we represent interviews and offers. No one in the world is better at legal recruiting and placement than BCG Attorney Search.

BCG Attorney Search will confidentially review your application and will not forward your materials to the firm without first discussing the opportunity with you.

Job Title: Production Line Manager

Work Location: Van Nuys, CA 91406

Duration: 9 months

Work Type: Temporary Assignment

Job Type: Onsite

Pay rate: $30 - $40/hr. on W2

Shift : M-F 6 AM

Payrate:$ 3 /hr.

Overview:

TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients world-wide. Our client is an international technology group with three core businesses: aerospace, defense, and security. It develops, produces, and markets engines and equipment for air and space, defense electronics, and security solutions.

Description:

SUMMARY

Reporting directly to the site Production Manager, you will be responsible for all activities of one or more repair production lines. You will manage a repair production team coordinated by a Technician/Leader for each line.

DUTIES AND RESPONSIBILITIES

This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time.

•Ensuring that the customer’s needs are met while respecting safety, quality, costs, and delivery deadlines.

•Ensuring the required transformations and change management.

•Providing a vision and uniting the teams around the entity’s challenges.

•Organizing your teams in a way that promotes multidisciplinary contributions, autonomy, accountability, and cross-functionality with the aim of being agile and adaptable to operational contingencies and customer needs.

•Ensuring that competencies and resources are maintained at the highest level within the expanded scope.

•Ensuring the accessibility and quality of data in the sector.

Guaranteeing the use of and compliance with the referential.

•Ensuring compliance of all production, processes and the correct application of all directives (Part 145 regulations, HSE, etc.).

Managerial Focus / Organizing the activity:

•Maintaining a working environment that complies with HSE requirements and ensuring the safety of the teams working under your responsibility

•Implementing the guidelines and objectives of the Site Manager for your scope of responsibility into SQCDP (Safety – Quality – Cost – Delivery – People) operational objectives in line with other Production Line Managers.

•Ensuring that products are repaired in terms of quality and quantity to meet customer order requirements within the set deadlines and costs

•Managing and planning the resources of the repair production lines around a workload / capacity tool in terms of repair production resources and staff (quantities and competencies). Anticipating the needs related to the ramp-up of the repair production tool.

•Identifying training needs, defining training initiatives to ensure the development of the team, and contributing to employee career management.

•Managing the skills and training of the teams to guarantee the quality of operations. Implementing effective communication within the team/repair production lines by ensuring communication routines to maintain a good social climate.

•Promoting the functioning of the teams in line with the leadership model principles.

Responsible for ensuring that employees comply with all Policies and Procedures

Operational Focus / Managing performance:

•Monitoring the performance indicators of the repair production lines in relation to the monthly targets and developing continuous improvement plans (improvement project): 5S, Kaizen, Kanban, etc.

•Proposing and implementing a plan for the continuous improvement of repair production lines: on production means and processes to contribute to the sustainable improvement of performance. •Ensuring that repair deadlines are met (deadlines of Work Orders within your scope, SPT):

-Validating schedules with the scheduler for repair production

-Following schedules and responding to issues (resources, quality, supply chain, maintenance, etc.)

•Involving the Technicians/Leader in managing performance and the teams coordination

•Taking part in the daily management routines of each line to ensure that they are followed and that standard are respected. Supporting your staff in the application of management standards to help them develop their skills

•Adapting the management system constantly, in particular the relevance of KPIs (Performance Indicators) based on changes in the results and context

•Ensuring the operational cohesion of the lines with the site’s other departments (HSE, Methods, Quality, Supply Chain, etc.) and promoting cross-functionality

•Optimizing set-ups within the lines in keeping with the site’s industrial strategy

QUALIFICATION REQUIREMENTS

a) Knowledge and Skills

•Aviation/Aerospace Component Repair Knowledge including CMM, Quality systems and manuals

•Computer Proficiency (Microsoft Suite)

•Performance management (quality, costs, deadlines)

•Production management/repair management

b) Competencies

•Technical Knowledge

•Risk Management

•Continuous improvement/Lean

•HSE requirements

•Skills Development

•Organizational Skills

•Leadership Capabilities

•Interpersonal Skills

•Change Management

•Process Oriented

Communications Proficiency

•Time/Priority Management

•Problem Solving/Analysis

•Discretion

c) Education and/or Experience

•Bachelor’s degree + 5 years / Engineering degree – General or Mechanical

• 3 to 5 years’ successful experience in manufacturing, installation, or repairs would be a considerable asset for this position. Experience in team management would be a plus.

Strong production/repair management and performance management skills.

Profile with proven initial experience in a similar field and immediately operational

d) Communication Skills

•Good oral and written communication skills essential for interaction with both internal and external customers

e) Physical Demands

•The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job.

•While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, and kneeling. The employee must sometimes lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

TekWissen® Group is an equal opportunity employer supporting workforce diversity.

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Wichita, KS (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PI28d909dffe6f-38

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Knoxville, TN (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PIc6dba56b523

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Roanoke, VA (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PI80414dffc879-38

About CareSimple

CareSimple provides remote patient monitoring solutions that connect patients to their care teams through cellular-enabled devices, including blood pressure cuffs, glucometers, and pulse oximeters, that transmit real-time health data to clinicians. We partner with health systems across the country to support proactive management of acute and chronic conditions, helping patients stay safer at home and enabling providers to intervene earlier when it matters most. With deep Epic and Cerner integrations, a robust cellular-based device logistics network, and a data-driven escalation engine, we make RPM simple, scalable, and secure. We partner with leading health systems – CHUM, Henry Ford Health, UCSF, MetroHealth, and St. Elizabeth Healthcare – to deliver measurable ROI through CPT-coded reimbursement and population-health improvements. Our collaborative culture values rigor, clarity, and responsiveness, ensuring every customer feels supported and every challenge becomes an opportunity to innovate.

Role Overview

As a Patient Support Nurse at CareSimple, you will serve as a key liaison between our patients and clinical partners. You’ll build ongoing relationships with patients, conduct proactive outreach, monitor and respond to patient-generated health data alerts, and provide compassionate clinical guidance to help patients stay engaged and safe between provider visits. You’ll also guide patients through onboarding and device setup, address questions and concerns, and escalate clinical issues as needed. Utilizing our support ticket system, you will manage key logistics processes to ensure seamless delivery and support for remote monitoring devices, playing a critical role in the success of our RPM programs.

Responsibilities

• Patient Support & Care: Guide patients through initial onboarding and setup of their RPM devices with empathy and professionalism. Provide ongoing patient care touchpoints — answering clinical questions, offering health education, and supporting patient engagement and adherence throughout the monitoring program.
• Patient Alert Management: Monitor incoming patient health data alerts generated by RPM devices (e.g., out-of-range vitals, missed readings). Assess alert severity, apply clinical judgment to determine appropriate response, and take action following established protocols and clinical judgement, whether that’s direct patient outreach, care coordination, or escalation to the provider team.
• Technical Coordination: Provide basic troubleshooting for cellular-enabled devices and escalate issues via internal support tickets. Work cross-functionally to ensure timely resolution of technical concerns.
• Device Logistics Oversight: Coordinate device ordering and fulfillment, ensuring timely and accurate deliveries. Manage exceptions (e.g., reshipments, replacements, returns) and monitor the glucose supply auto-replenishment program. Track high-priority orders and proactively address risks to prevent delays.
• Documentation: Ensure clear and timely documentation across internal systems and, when applicable, in the customer’s EHR.

Qualifications

• Active RN or LPN license in a Nurse Licensure Compact (NLC) state
• Preferred: Fluent in Spanish and English (spoken and written)
• Preferred: Certified Diabetes Educator (CDE) or Certified Diabetes Care and Education Specialist (CDCES) certification
• 5+ years of clinical experience, preferably in telehealth, home health, or primary care
• Strong communication and interpersonal skills; comfortable working with seniors and underserved populations
• Technologically confident, with the ability to work across multiple platforms (EHR, ticketing, telehealth)
• Authorized to work in the United States without sponsorship

To Apply

Email with the subject “Patient Support Nurse – Remote”

Note on Resume Processing

We may use secure Large Language Models (LLMs) to assist with the review of resumes by analyzing skills, experience, and qualifications. Candidates who prefer not to have their application processed using AI may indicate this in their applicat