Engineering Jobs in Jurupa Valley

This position will be open until filled

To perform professional and technical engineering work in an assigned area such as plan and development review, contract administration and design; and to provide technical staff assistance to higher level engineering staff.

Position Snapshot/A Day in the Life:

This Associate Engineer position will be within the Traffic Division of the Public Works/Engineering Department. With a team of 11 (7 of whom are primarily responsible for signal operations and maintenance), we are responsible for overseeing the City's transportation system, including supporting Capital Improvements Projects, Land Development projects, Street Maintenance, Planning, and others.

Under the direction of a Senior Engineer or City Traffic Engineer, you will primarily be responsible for reviewing private development and capital improvement project related traffic studies, identifying impacts and deficiencies, and determining the most appropriate improvements and design features needed. Other day-to-day duties will also involve reviewing and preparing signing/striping plans and traffic control plans, investigating and responding to concerns from the general public, and participating in long-range planning activities. You may also be asked to help work on special projects and grant pursuits, preparing staff reports, participating in interagency coordination efforts, preparing RFP's/RFQ's, reviewing and processing proposals/contracts/traffic plans, and conducting various meetings.

Distinguishing Characteristics: This is the journey level class within the Engineering series. Employees within this class are distinguished from the Assistant Civil Engineer by the performance of the full range of duties as assigned. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies within the work unit. Positions in this class are flexibly staffed and may be filled by advancement from the Assistant level.

Supervision Received and Exercised: Receives direction from higher level engineering staff and may exercise technical supervision over less experienced staff within the work unit and technical or functional supervision over staff within the Department.

The incumbent must have the ability to:

• Review and check residential and commercial building plans or plans related to structures such as streets, sidewalks, gutters and other off-site construction; check plans for conformance with regulations regarding line, grade, size, elevation and location of structures; check calculations
• Maintain records of all plans and contract documents.
• Prepare progress reports on projects under construction; maintain records of changes and field notes.
• Investigate field problems affecting property owners, contractors and maintenance operations.
• Coordinate assigned activities with consultants, engineers, developers, contractors, other city departments and divisions, and with outside agencies.
• Develop plans, specifications and other contract documents.
• Provide technical and professional engineering support services relative to assigned areas of responsibility.
• Prepare special engineering studies and reports; perform special assignments on engineering problems as necessary.
• Plan, prepare and design a variety of engineering projects such as roads, bridges, structures and hydraulics.
• Calculate the quantity, quality and cost of materials used for various projects.
• Review engineering calculations of other engineers or engineering technicians.
• Prepare plans and specifications, maps, deeds and legal descriptions.
• Review plans for traffic signals, traffic signing, and traffic striping for conformance with City policies and State and Federal requirements.
• Plan, prepare, and design a variety of engineering projects, such as traffic signals, traffic striping, and traffic signing.
• Review all permits involving work in public streets; review any and all traffic control plans required due to work in streets.
• Prepare traffic control plans and requirements.
• Communicate clearly and concisely, both orally and in writing.
• Establish and maintain cooperative working relationships with those contacted in the course of work.
• Perform and other tasks or functions that may be deemed necessary to the daily operations of the employer.
  
  

THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER.

WORKING CONDITIONS:In the performance of daily activities, this position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, and bending; the ability to push, pull, drag and/or lift up to 25 pounds; normal manual dexterity and hand/eye coordination; repetitive hand and wrist movement using a computer keyboard and mouse; corrected vision to normal range; acute hearing; written and oral communication; use of standard office equipment such as computers, telephones, copiers, calculators and facsimiles; frequent contact with other staff and the public; may be exposed to severe weather conditions such as high wind, rain, and other outside conditions.

A combination of experience and training that would provide the required knowledge and abilities is qualifying. The incumbent must have the knowledge of:

• Principles and practices of civil engineering.
• Methods, materials and techniques used in the construction of public works projects.
• Modern developments, current literature and sources of information regarding engineering.
• Principles of advanced mathematics and their application to engineering work.
• Applicable laws and regulatory codes in assigned area of responsibility.

The ideal candidate will have a strong technical background in preparing and reviewing transportation analysis for a range of project scales and being able to interpret the practical implications of the analysis results. They would be familiar with VMT, the current industry trends related to its implementation, and be able to assist the team in managing and updating our Traffic Impact Guidelines. They'll have excellent skills in using Excel and be comfortable working within it to create reliable and flexible tools for day-to-day analysis needs. The Traffic division and the City pursue significant grants and special projects that allow us to grow our infrastructure and capabilities, as well as to implement the best practices in the industry, the ideal candidate would be someone who is knowledgeable about the current trends in the Transportation engineering and planning fields and be able to lead grant pursuit efforts and independently manage such projects along with coordination with stakeholders of competing interests.

Experience: One (1) to two (2) years of increasingly responsible experience in civil engineering.

Preferred Qualifications

• At least two (2) years of experience preparing and reviewing transportation impact analyses for a range of project scales and being able to interpret the practical implications of the analysis results.
• Familiarity with VMT, the current industry trends related to its implementation, and have experience managing and/or updating Traffic Impact Guidelines.
• Advanced proficiency in Microsoft Excel, including building tools for transportation data analysis.
• Experience managing transportation projects and coordinating with internal and external stakeholders with competing interests.
• Experience presenting at public meetings and responding to questions/feedback from elected or appointed officials.
• Traffic Engineering license.

Education: Equivalent to a Bachelor's degree from an accredited college or university with major coursework in civil engineering or a closely related field. Some additional years of experience and specialized training may substitute for some of the educational requirements.

License or Certificate: Possession of, and continuously throughout employment, a valid CA Class "C" Driver's License.

Successful candidates will be required to complete an annual Statement of Economic Interest Form (700 Form) and bi-annual ethics training pursuant to AB 1234.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• Yes
  
  
• No
  
  

• 
  
  
• Yes
  
  
• No
  
  

Required Question

Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff.
Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements.

Essential Functions

Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience.

ESSENTIAL FUNCTIONS:Incumbent must have the ability to:

• Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation.
• Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments.
• Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements.
• Provide public assistance at counter and over the telephone.
• Prepare quantity and cost estimates for engineering projects.
• Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes.
• Review engineering plans to determine appropriate layout of construction projects.
• Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades.
• Make and check mathematical calculations related to surveying, drafting and basic engineering.
• Maintain accurate survey records in the form of field notes and sketches.
• Participate in a variety of engineering design and planning work related to municipal engineering projects.
• Answer questions and provide information to the public concerning engineering activities.
• Assist in development and maintenance of the record keeping and filing systems.
• Prepare, assemble and distribute copies of maps, charts and blueprints.
• Answer questions and provide information to the public concerning engineering activities.
• Perform any other tasks or functions deemed necessary to the daily operations of the employer.

EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of:

Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of:

• Terminology, methods, practices and techniques of drafting.
• Trigonometry as applied to the computation of angles, areas, distances and traverses.
• Elementary surveying techniques and practices.
• Engineering maps and records.

• Perform moderately complex engineering and mathematic calculations with speed and accuracy.
• Understand and follow written instructions and sketches.
• Use and care for drafting, surveying, and mechanical instruments and tools.
• Work independently in the absence of supervision.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• No experience
  
  
• Less than one (1) year.
  
  
• One (1) year or more year(s) but less than two (2) years.
  
  
• Two (2) or more years but less than four (4) years.
  
  
• Four (4) or more years but less than six (6) years.
  
  
• Six (6) years or more but, less than eight (8) years.
  
  

Required Question

Supply Chain Planning Manager

ABOUT THE COMPANY:

True Religion is an urban casual lifestyle brand focused on high-quality denim, activewear, accessories, and more—for men, women, and kids. Founded in 2002, we shook up the Los Angeles denim scene by re-engineering the classic five-pocket jean with our signature Super T Stitch and iconic horseshoe detailing—now synonymous with bold, unapologetic style and the True Religion legacy. Driven by a relentless commitment to craftsmanship, we design with one goal in mind: to stand out from the crowd. We don’t just create denim—we give it attitude, authenticity, and individuality.

THE PURPOSE:

The Supply Chain Planning Manager supports the Logistics & Operations team by ensuring that inbound and outbound operations are balanced and DC/3PL operations are optimized. This role plays a key part in keeping day-to-day operations running smoothly by enabling data-driven decision-making and minimizing errors across logistics workflows, collaborating with procurement, planning, customer service, sales and the DC operations.

THE ROLE (what you are accountable for)

Supply & Demand Planning

• Develop and maintain supply and demand plans to align inventory levels with forecasted customer needs
• Monitor demand trends and adjust plans to mitigate risks related to inventory shortages or overstock
• Analyze historical data and market insights to improve forecast accuracy
• Align supply plans with warehouse capacity, supplier lead times, and operational constraints

Cross-Functional Collaboration

• Partner closely with procurement, production, logistics, warehouse, and sales teams to ensure smooth product flow
• Identify and resolve operational and data discrepancies across supply chain functions
• Support vendor and supplier relationship management and performance tracking

Performance Monitoring & Reporting

• Track and report on key supply chain KPIs including inventory health, forecast accuracy, freight activity, and operational efficiency
• Generate recurring and ad-hoc reports to support leadership decision-making
• Provide actionable recommendations to improve supply chain performance

Risk Management & Continuous Improvement

• Identify potential supply chain risks and support mitigation planning
• Contribute to operational initiatives aimed at reducing costs, improving lead times, and enhancing service levels
• Support continuous improvement efforts across logistics and planning processes

Data & Systems Management

• Maintain accurate supply chain, logistics, and inventory data across internal systems
• Track inbound and outbound shipments to ensure accuracy and documentation integrity
• Support freight tracking and basic analytics to identify discrepancies and trends
• Partner with IT and analytics teams to improve planning tools and data visibility

YOU ARE: You are highly detail-oriented and take pride in maintaining accurate, reliable data. You are organized, dependable, and comfortable managing multiple priorities in a fast-paced. You enjoy working independently while collaborating closely with cross-functional teams, and you communicate clearly and professionally. You are curious about supply chain operations and understand how clean data supports inventory flow, on-time delivery, and business decisions. You have an interest in the apparel industry and are motivated to learn how products move from production through distribution.

REQUIRED MINIMUM EXPERIENCE:

• 5–7 years of experience in supply chain planning, logistics, or operations support
• Bachelor’s degree in Supply Chain, Logistics, Operations, or a related field, or equivalent practical experience
• Advanced proficiency in Microsoft Excel, including Pivot Tables and data analysis tools
• Experience analyzing supply chain data such as inventory levels, transportation metrics, and distribution performance
• Familiarity with ERP, WMS, and TMS systems; experience with platforms such as Manhattan or Full Circle preferred
• Working knowledge of international shipping terms and Incoterms

PREFERRED EXPERIENCE:

• Experience in apparel or consumer goods supply chain environments.
• Exposure to inventory management processes, including stock reconciliation and variance analysis.
• Ability to analyze logistics and freight data, identify discrepancies, and escalate issues as needed.
• Experience using reporting and data visualization tools to support operational decision-making.

ADDITIONAL ROLE INFORMATION:

• Compensation: The anticipated base salary range for this role is $100,000 – $115,000. This is a full-time, exempt position. This range represents the low and high ends of the expected base salary range for this role based on the applicable location. True Religion reasonably expects to pay within this range in compliance with all applicable federal, state, and local laws. Actual compensation will be determined based on factors including relevant experience, skills, knowledge, and internal equity.
• Perks: We offer a mix of benefits and perks to support our employees at work and beyond, including health benefits, a 401(k) with employer match, merchandise discounts, commuter benefits, wellness & employee assistance programs, and more.
• Work Model: This role is on-site at our Fontana Distribution Facility and follows a hybrid work model, with an expectation of in-office presence on designated days to support collaboration and business needs.
• Employment Eligibility: Employment with True Religion is contingent upon meeting applicable employment eligibility requirements.

True Religion is an Equal Opportunity Employer. We are committed to creating an inclusive workplace and do not discriminate on the basis of race, color, religion, sex, gender identity or expression, sexual orientation, age, national origin, disability, veteran status, or any other protected characteristic under applicable law. Employment decisions are based on qualifications, merit, and business needs.

Applicable law requires employers to provide reasonable accommodation during the recruitment process. Please let us know if you require accommodation, and we will make appropriate arrangements.

In connection with your application and candidacy, True Religion may collect personal information such as your name, contact information, education history, and professional or employment background, as permitted by applicable law. Certain additional information (such as identification or payroll-related information) may be collected after an offer of employment is made or as required for onboarding, employment eligibility verification, or benefits administration. For more information about how we collect, use, and protect personal information, please review our Privacy Policy at California residents may review additional disclosures at

Our client is a leader in power distribution and protection systems, offering advanced relay and control panels, medium-voltage switchgear, and enclosures, including power and control buildings (E-Houses). They provide made-to-order/customized, turn-key solutions that ensure safe, secure, and reliable power distribution.

The Estimating Director will oversee national estimating teams and processes. Responsibilities include developing and implementing estimating procedures, maintaining a high bid success rate with strong profit margins, and fostering talent within the department. This role requires travel to the Canada and Texas offices for at least one week every two months to review projects and promote a positive culture among engineering teams.

The ideal candidate will possess the following qualifications:

• Bachelor’s degree in Electrical Engineering (preferred), or a related electrical field.
• Minimum of 8 years of estimating experience, preferably within the electric utility industry.
• At least 8 years of leadership experience, demonstrating strong supervisory and management skills.
• Ability to work in a fast-paced environment and develop niche product order estimates for clients.
• Responsible for preparing RFP estimates for labor, engineering, logistics, and product ordering, with 400 to 500 bids annually.
• Ability to interpret mechanical and electrical drawings, schematics, and diagrams.
• Ability to interpret commercial documents.
• Excellent written and verbal communication skills
• Excellent organizational skills and attention to detail
• Ability to multitask, prioritize, and manage time efficiently.
• Strong critical thinking skills and sound independent judgment.
• Excellent interpersonal and customer service skills
• Proficiency with Microsoft Office Suite (Word, Excel, Outlook) and related programs such as AutoCAD and SolidWorks.

Responsibilities:

• Establish procedures for the estimating team to follow from both technical and financial perspectives.
• Manage relationships with external customers and the business development manager to ensure cost effectiveness for both the company and its clients.
• Monitor technology trends and prepare cost reduction and business recommendations accordingly.
• Coordinate with departments to refine product estimates and establish standards for products and labor hours.
• Perform a final review of all estimates before sending them to the customer or the next layer for approval.
• Review proposals comprehensively to ensure customer confidence and market competitiveness.
• Review terms and conditions for all estimates and approve them within designated authority limits.
• Build strong client relationships and act as a subject matter expert on product capabilities.
• Read and interpret documents to understand customer requirements, define the scope of work, and assess the company’s ability to bid.
• Conduct initial reviews of bid opportunities with the team to confirm alignment with company capabilities and identify potential alternative solutions for the customer.
• Encourage creative ideas within the department to ensure proposals are accurate and appealing to customers.
• Maintain accurate pricing for the internal database in coordination with the purchasing department.
• Recommend improvements to standardize the bid process and reduce cycle time.

IT Support - On Site (Mandarin fluent)

Fontana, CA | 12-month contracts, renewable

Job Responsibilities and Objectives

1. Network Infrastructure: Responsible for the construction, maintenance, and optimization of the business network within the company. Ensure network stability and security, and proactively implement risk prevention and emergency response measures.
2. Deployment & Maintenance: Manage the implementation and deployment of network equipment and projects to ensure smooth business operations. Oversee the operation and maintenance (O&M) of daily office and production equipment (e.g., PC terminals, printers, PDAs) to guarantee high efficiency and stability.
3. Operational Support: Collaborate with business departments for on-site O&M support and manage network assets. Must be available for occasional short-term business travel to support local project implementation as needed.
4. Service Mindset: Demonstrate a customer-centric service attitude and strong sense of responsibility. Possess excellent learning ability, problem-solving skills, and a spirit of communication and collaboration.

Job Requirements

Educational Background:

• Majors in Computer Science, Communication Engineering, Network Engineering, or related fields are preferred.

Work Experience:

• 3–5 years of experience in network O&M.
• Proven track record in implementing and maintaining medium-to-large scale networks (200+ terminals).
• Experience in server room and network planning, implementation, and O&M management.

Core Competencies:

• Technical Skills: Ability to independently install, debug, and maintain equipment from major vendors such as Huawei, Ruijie, Cisco, Fortinet, and Extreme. Proficient in Windows, Linux, and macOS.
• Language Skills: Mandarin and English preferred.

Personal Attributes:

• Teamwork: Excellent communication skills to coordinate effectively with business departments and advance project progress.
• Problem-Solving: Ability to analyze and resolve complex issues independently with effective solutions.
• Responsibility: High sense of accountability and the ability to work under pressure.
• Customer Focus: Strong awareness of business needs and a proactive approach to identifying and solving problems

Additional Information

• Contract: 12-months, renewable

Apply now to be considered

To apply: Please submit your CV in English. Only shortlisted candidates will be contacted.

Preconstruction Manager / Senior Estimator

Location: Riverside, California

Compensation: $150,000 to $200,000 depending on experience plus bonus and benefits

A growing commercial general contractor with a strong presence throughout California is seeking an experienced Preconstruction Manager / Senior Estimator to support expanding operations in the Riverside market. The company has built a reputation for delivering complex public and private sector projects and continues to see strong demand across healthcare, education, and commercial markets.

This role will play a key part in leading preconstruction efforts, developing accurate cost estimates, and collaborating with project teams from concept through construction. The ideal candidate will bring a strong background in public works estimating with experience in sectors such as healthcare, DSA schools, and large commercial facilities.

Key Responsibilities

• Lead preconstruction and estimating efforts for commercial and public works projects

• Review drawings, specifications, and bid documents to develop accurate cost estimates

• Prepare conceptual, schematic, design development, and GMP estimates

• Perform detailed quantity takeoffs and subcontractor bid analysis

• Develop project budgets, cost models, and value engineering options

• Manage subcontractor outreach and bid solicitation

• Collaborate with project managers, superintendents, and leadership during project planning

• Participate in client meetings and preconstruction presentations

• Maintain cost databases and historical pricing information

• Support schedule reviews and logistics planning during preconstruction

Preferred Project Experience

• Public works construction

• Healthcare facilities and OSHPD or hospital related projects

• DSA school and education projects

• Large commercial or institutional buildings

Qualifications

• 7 to 15 plus years of commercial construction estimating experience

• Experience estimating public works projects strongly preferred

• Strong understanding of conceptual budgeting and preconstruction strategy

• Ability to interpret construction documents and specifications

• Experience working with subcontractor markets throughout Southern California

• Proficiency with estimating software and construction management tools

• Strong communication skills and ability to collaborate with project teams

Why This Opportunity

• Established and growing commercial builder with strong project backlog

• Diverse project portfolio across healthcare, education, and commercial sectors

• Opportunity to play a leadership role in preconstruction strategy

• Competitive compensation package with bonus potential

• Clear path for growth into senior leadership roles within preconstruction

This position is ideal for an experienced estimator who enjoys working closely with operations teams and clients to shape projects early in the preconstruction phase while delivering accurate budgets and strategic project planning.

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

3 Entry Level Manufacturing Engineers - base salary $70,000 - $75,000 per annum plus benefits

2 Mid Level Manufacturing Engineers - Base salary $80,000 - $84,000 per annum plus benefits.

1 Senior Manufacturing Engineer - Base Salary $86,000 - $90,000 per annum plus benefits.

The achievers and courageous challenge-crushers we seek, have the following characteristics and skills:

What You Will Do:

• Create and maintain standard work to improve the accuracy, speed, and efficiency of production processes.
• Develop and deliver comprehensive training programs to educate employees, teams, and stakeholders on Lean methodologies, tools, and principles.
• Review and refine operations to standardize workflows and ensure best practices are implemented for maximum efficiency.
• Plan, facilitate, and execute Value Stream Mapping (VSM) activities to identify current-state processes, bottlenecks, and areas of improvement across the value stream.
• Update, maintain, design, and communicate layouts of factory work cells based on Continuous Improvement (CI) principles, supporting the Sales and Operations Planning (S&OP) factory site plan.
• Collate data from various sources including ERP software.

What You Will Bring:

• Bachelor’s degree in mechanical engineering or similar STEM discipline.
• In absence of a degree, must have 9 years of relevant experience.
• 5+ years of manufacturing experience including Lean principles.
• Experience with equipment and factory layouts.
• Problem-solving skills with ability to proactively identify alternate solutions to overcome difficult technical challenges.
• Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams to achieve operational goals.
• Detail-oriented and capable of managing multiple priorities in a fast-paced environment.

Work Requirements:

This is a fulltime and 100% on-site role located in Riverside, CA

• You must be able to commute to and from the location with your own transportation arrangements to meet the required working hours.
• Shop floor environment, which may include but not limited to extensive walking, and ability to lift up to 40 lbs.

Travel requirements:Due to the nature of the work, zero travel is required.

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

*** YOU MUST LIVE IN THE INLAND EMPIRE MARKET TO BE CONSIDERED ***

Software Account Executive

This is a very exciting time for Thryv as we are making waves in becoming an international leading SaaS and platforms business provider for Small to Medium-Sized Businesses (SMB’s). We’ve been around in one form or another for more than 125 years, always with one goal in mind – helping small businesses compete and win. We provide the technology, software and local business automation tools that small businesses need to better manage their time, communicate with clients, and get paid so they can take control of their business and be more successful. Thryv is a seven-time winner of Selling Power Magazine’s Top 60 companies to Sell For, as well as Newsweek’s list of America’s 100 most loved global workplaces for 2024 and 2025!

Thryv, Inc. - Thryv Makes Selling Power’s Annual 60 Best Companies to Sell for List for Seventh Consecutive Year

Global Most Loved Workplaces 2025 - Newsweek

About the role:

This role is responsible for increasing Thryv’s penetration to the existing client base, increasing client engagement with existing software clients, and growing the SaaS client base through new sales. This role calls on existing clients to nurture and grow relationships while identifying and pursuing new client opportunities to meet a predetermined sales quota. The Software Account Executive conducts greater than 50% of their work outside their home office.

• Contacts assigned clients and presents opportunities for additional sales and/or extended usage based on client needs.
• Identifies and secures new SaaS clients by leveraging self-generated prospecting (i.e. networks, referrals, etc.) and company-initiated prospecting programs.
• Executes all defined operational processes and requirements with excellence (i.e., designed cadences for client and prospect engagement, ongoing product and demo certifications, order entry requirements, centralized intake forms, etc.).
• Participates in sales meetings, call calibrations, and training as needed.

About Thryv- End-to-end client experience platform:

Thryv provides a secure, easy-to-use platform that automates tasks and allows clients to put their customers at the center of their business. Our software offers Customer Relationship Management (CRM), Search Engine Optimization, Marketing, online invoices & receipts, text messaging, email marketing, print and social media management. This automation provides the edge local businesses need to better succeed in their market.

We do it all with a convenient client experience management app that allows small business owners to get the job, manage the job and get credit all from the palm of their hand.

In This Role, You’ll Get To:

• Help grow local business market share
• Defend small business America and the American Dream
• Work with existing clients and hunt for new business
• Become SaaS (software as a service) experts
• Receive world-class training
• Have the support of a four-time winner of The Top 60 Companies to Sell For company with a 125+ year legacy
• Educate and guide prospects through the buyer’s journey to help them learn how Thryv can grow their business
• Partner with marketing and technology departments to execute sales strategy as the company introduces enhancements to existing solutions and/or releases new products
• Bring your thinking, strategies and ideas to advance our company’s values, unique culture and vision for the future

We Are Looking for People Who:

• We are seeking driven and hungry individuals to strategize and offer our unique software solutions to local business owners
• Who are engagement gurus while properly managing expectations
• Have the desire and commitment to do what it takes to be successful in sales
• Have a positive outlook and a strong ability to take responsibility for their successes and failures
• Goal oriented…you’re known for destroying your sales goals
• Persuasive…you can explain software solutions in simple terms
• Exceed sales quotas and expectations
• Build and nurture a pipeline of prospects and close deals
• Develop great solutions to help customers WIN!
• Comfortable working in a remote capacity: Hi-Speed internet, acceptable office setting and proper business attire is a must.

Basic Qualifications

• 4+ years of related sales experience (7+ years is preferred)
• 3+ years of experience in an (outbound) full sales cycle role is required
• The role centers on developing and executing strategies that accelerate customer acquisition.
• Sell digital advertising solutions with a working knowledge of SEO, SEM, and related ad products, effectively educating clients on benefits, aligning offerings to their marketing goals, and driving new business growth through consultative sales.
• Experience in a SaaS role or company is preferred, but not required
• The ideal candidate will have experience in Enterprise-level sales (not a requirement)
• Strong industry knowledge with the ability to gain a thorough understanding of the Thryv product suite
• Exceptional interpersonal and communication skills, both written and verbal, with strong emotional intelligence, adaptability, and the ability to build relationships.
• Time and organization skills with the ability to effectively manage multiple priorities with competing schedules or conflicting demands
• Ability to work independently in a remote-first environment, effectively conducting sales presentations while following company established processes and procedures
• Strong technical skills with proficiency in MS office and the ability to learn new programs and systems
• Associate degree (or international equivalent) or equivalent experience required

Who We Are

At Thryv, we’re a team fiercely devoted to the success of local businesses. We’ve been around for over 100 years, always with one goal in mind — helping small businesses compete, win and succeed. We provide the technology, software and local business automation tools small business owners need to better manage their time, communicate with clients, and get paid, so they can take control of their business and be more successful. We support businesses across the U.S., and we have team members all around the country (even internationally). In fact, we’re a work-from-anywhere company, because that’s how we get the work done. Culture is vital at Thryv because it shapes our identity and, therefore, our measurements for growth. We have an identified set of values that hold all of us accountable, paving the way for our company success and our legacy. All of this helps us deliver results for our clients and creates success for our employees. Here at Thryv, making a positive impact within our team and in our local community is the reason we get out of bed every morning.

Find out more at /careers/

Belonging at Thryv

We believe in a work environment where all individuals are treated fairly and respectfully, have equal access to opportunities and resources, and can contribute fully to the organization’s success. We want our employees to feel a part of something big, and we encourage the sharing of ideas and collaboration across the organization. We strive to ensure our work environment reflects diversity, fairness and meritocracy. We believe all employees should have the opportunity to perform effectively in their position. We value every employee and the authenticity they bring to their role and to the organization. As a result, our employee policies and internal practices focus on ability and merit as the standards for success.

Requisition Detail and Process

This information indicates the general nature and level of work performed by employees in this job. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. The duties and responsibilities in this job description may be subject to change at any time due to reasonable accommodation or other reasons. The final job level offered may vary based on the applicant’s competencies and qualifications such as experience and education, and other job-related reasons.

Our Commitment to Equal Opportunity

Thryv is proud to provide equal employment opportunities to all employees and applicants, without regard to gender, color, race, religion, sexual orientation, national origin, citizenship, age, disability, veteran status, pregnancy, genetic information, or any characteristic protected by law. Thryv is committed to provide equal employment opportunities throughout the employment relationship including recruitment, hiring, discharge, compensation, benefits, discipline, development, and advancement or other aspects of employment.

The estimated on-target earnings (OTE) for this role, which includes base salary and incentives, is $148,000 - 152,000 per year, with the potential to earn more in most U.S. locations. Final offer amounts are determined based on the candidate’s location and may vary from the figure listed above.

Position Summary

The Director of Procurement is a senior executive responsible for leading the company's global sourcing and procurement strategy across direct and indirect materials, components, and services critical to commercial vehicle manufacturing operations. This individual will oversee a high-performing procurement organization, drive cost competitiveness, ensure supply continuity, and cultivate strategic supplier relationships across international markets including North America, Europe, and Asia-Pacific. The Director will partner closely with Engineering, Operations, Finance, and Quality to align procurement activities with the company's product roadmap and business objectives.

Key Responsibilities

Strategic Procurement Leadership

• Develop and execute a comprehensive global procurement strategy aligned with the company's operational and commercial vehicle manufacturing goals.
• Lead make-vs-buy decisions and drive total cost of ownership (TCO) analysis across categories including powertrain components, chassis systems, electronics, raw materials, and aftermarket parts.
• Establish and enforce procurement policies, standards, and compliance frameworks across all international purchasing activities.
• Partner with executive leadership to integrate procurement priorities into annual operating plans and long-range strategic planning.

International Sourcing & Supplier Management

• Build and manage a diversified, resilient global supplier base spanning North America, Europe, Mexico, India, and Asia-Pacific regions.
• Lead supplier qualification, onboarding, performance evaluation, and development programs to ensure quality, delivery, and cost targets are consistently met.
• Negotiate complex, high-value contracts and long-term agreements with Tier 1 and Tier 2 suppliers, including volume commitments, pricing mechanisms, and risk-sharing provisions.
• Monitor geopolitical, regulatory, and macroeconomic developments affecting international supply chains and proactively implement mitigation strategies.
• Manage supplier risk through dual-sourcing strategies, safety stock policies, and continuous supply chain mapping.

Cost Management & Value Creation

• Deliver year-over-year cost reductions through strategic negotiations, design-to-cost initiatives, and process improvements in collaboration with Engineering.
• Implement spend analytics and category management frameworks to identify and capture savings across a multi-hundred-million-dollar annual spend portfolio.
• Drive value engineering and early supplier involvement (ESI) initiatives to reduce material costs on new vehicle programs.
• Oversee procurement budgeting, forecasting, and variance reporting in alignment with Finance.

Team Leadership & Development

• Lead, mentor, and develop a team of procurement managers, category managers, and buyer analysts across domestic and international locations.
• Foster a high-performance culture centered on accountability, continuous improvement, and cross-functional collaboration.
• Define team structure, resource allocation, and succession planning to support organizational growth.
• Champion diversity and inclusion within the procurement function and among the supplier base.

Cross-Functional Collaboration

• Serve as the primary procurement liaison to Engineering, Program Management, Manufacturing, Quality, and Legal functions.
• Collaborate with New Product Development (NPD) teams to ensure timely sourcing of components for vehicle launches, meeting cost, quality, and timing milestones.
• Partner with the Quality team to resolve supplier quality issues and drive corrective action programs.
• Support import/export compliance, customs, and trade regulation adherence for international transactions.

Required Qualifications

• Bachelor's degree in Supply Chain Management, Business Administration, Engineering, or a related field; MBA or Master's degree strongly preferred.
• Minimum 12 years of progressive procurement experience, with at least 5 years in a senior leadership role within an automotive, commercial vehicle, heavy equipment, or related manufacturing environment.
• Demonstrated experience managing international procurement operations across multiple geographies, including Europe, Asia (particularly China, India, or South Korea), and Mexico.
• Proven track record of leading large-scale contract negotiations and delivering measurable cost savings.
• Deep expertise in category management, strategic sourcing, supplier development, and supply chain risk management.
• Proficiency in procurement systems and ERP platforms (SAP, Oracle, or equivalent); experience with spend analytics and eSourcing tools.
• Strong knowledge of Incoterms, international trade regulations, customs requirements, and supplier compliance standards.
• Excellent leadership, communication, and stakeholder management skills with the ability to influence at all levels of the organization.

Who We Are

We are Skybound.

We love creators. We love fans. We love thrilling games, indelible images and moving stories. Our roots are in comics, but our brands extend to video games, television, movies, merchandise, and live experiences. We take special pride in original tales, fresh characters, and diverse voices.

From well-known franchises to freshly-minted originals, we offer the chance to join brilliant creators shaping a new generation of entertainment in a concentrated, agile environment where every perspective matters, and any idea can create a breakthrough.

Opportunity

Skybound is looking for an experienced and passionate Senior Systems Designer to help build a thrilling new game franchise. The Senior Systems Designers create rewarding loops that help players set goals, progress, and stay engaged over multiple play sessions. They craft and tune player advancement and rewards across the entire game.

You will collaborate closely with the Game Director, department leads, and cross-disciplinary teams to define and drive the strategic vision for player progression and meta systems. You'll mentor other designers, establish best practices, and ensure the systems design team delivers high-quality, scalable solutions that support both gameplay and business goals.

If you're passionate about building compelling systems, love mentoring others, and thrive in a creative, combat-focused environment, we'd love to hear from you.

Reports: This position will report to Game Director.

Responsibilities: Responsibilities include, but are not limited to:

• Lead the vision and execution of player progression, meta systems, and engagement loops across single and multiplayer experiences.
• Define and drive KPIs for progression systems that align with player satisfaction and business goals.
• Mentor and guide systems designers, fostering a culture of excellence, collaboration, and innovation.
• Own major feature areas from concept through implementation, ensuring quality and consistency across the game.
• Collaborate cross-functionally with engineering, art, UX, and production to ensure systems are well-integrated and technically feasible.
• Establish and evangelize best practices for systems design, documentation, and tool usage.
• Anticipate and resolve design challenges, proactively improving workflows and pipelines.
• Playtest and iterate on systems regularly, using data and player feedback to refine and optimize.

Requirements

• 10+ years of experience in the games industry, with a focus on systems design and progression.
• Proven leadership experience, including mentoring designers and leading cross-functional initiatives.
• Shipped at least one AAA title with significant ownership of progression or meta systems.
• Deep understanding of player psychology, engagement strategies, and content pacing.
• Strong analytical skills, with the ability to translate complex systems into clear, actionable designs.
• Experience collaborating with engineering on tool development and pipeline optimization.
• Excellent communication and documentation skills, with fluency in PowerPoint, Word, Excel, Visio, etc.
• Strategic mindset, balancing creative vision with technical and business constraints.

Preferred Qualifications

• Experience with Unreal Engine, including scripting and integration into production pipelines.
• Strong technical scripting skills and a willingness to learn new tools and technologies.
• Passion for combat-oriented games, player progression, and Skybound's unique properties.

Job Type: Regular, Full-Time

Salary Range: $125,000 - $165,000

• Actual base salary is dependent on several factors including but not limited to: market dynamics, location and region, experience, specialized skills/training (education), level of responsibility, budgetary considerations, tenure at the company (for current employees), etc.
• The salary range listed is just one component of the total compensation package for employees
• Compensation decisions are dependent on circumstances of each role

Skybound offers a wide array of benefits including medical, dental, vision, life insurance, flexible spending and dependent care accounts, as well as free counseling through our Employee Assistance Program (EAP). We also offer a 401K plan with 4% match, 12 weeks of paid parental leave, generous time off, wellness benefits, and tuition reimbursement.

Company Overview

Skybound is a multiplatform content company working closely with creators and their intellectual properties, extending stories and universes to new platforms, including comics, television, film, tabletop and video games, books, digital content, events, and beyond. We are home to critically-acclaimed global franchises, including The Walking Dead and Invincible.

Skybound Games produces, publishes and distributes video and tabletop games across all genres, including the multi-million-unit selling The Walking Dead video game series. In addition to our wholly-owned franchises, we work with independent developers to foster and create original games with compelling characters and worlds, strong creator and artistic focus, and innovative approaches to engaging genres.

Invincible is one of Skybound's tentpole franchises (celebrating 20 years!) and spans the world of comic books, merchandise, video games, and the critically acclaimed adult animated television series on Prime Video. Now in its second season, the television show has consistently ranked as one of Prime Videos top-streamed series with a 99% score on Rotten Tomatoes. Based on the groundbreaking comic book by Robert Kirkman, Cory Walker, and Ryan Ottley, Invincible revolves around 18-year-old Mark Grayson, who's just like every other guy his age—except his father is (or was) the most powerful superhero on the planet. Still reeling from Nolan's betrayal in Season One, Mark struggles to rebuild his life as he faces a host of new threats, all while battling his greatest fear - that he might become his father without even knowing it.

The show stars Steven Yeun, with Sandra Oh, Zazie Beetz, Grey Griffin, Chris Diamantopoulos, Walton Goggins, Gillian Jacobs, Jason Mantzoukas, Ross Marquand, Khary Payton, Zachary Quinto, Andrew Rannells, Kevin Michael Richardson, Seth Rogen, and J.K. Simmons. Executive producers include Skybound's own Kirkman, David Alpert, and Margaret M. Dean.

Equal Opportunity Employer

At Skybound we value diversity and are looking for extraordinary employees of all backgrounds! Skybound is an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, citizenship, age, genetic information, disability, hair texture or veteran status. In addition to federal law requirements, Skybound complies with all applicable state and local laws governing nondiscrimination.

Skybound will consider applicants with criminal histories in a manner consistent with the CA Fair Chance Act and Los Angeles Fair Chance Initiative for Hiring Ordinance.

For more information on our Privacy Policy, visit: working/work at home options are available for this role.

Director of Estimating & Manufacturing

Position Type: Direct Hire

Position Location: Fontana, CA

Position Salary: $150,000.00 - $200,000.00 Base + Bonus (Dependent on Experience)

Responsibilities:

• Lead the estimating teams and processes at a national level for the business.
• Focused on growing the business, this role will be responsible in ensuring that the estimating procedures are developed and executed properly, maintaining a high bid success rate with a strong profit margin, and growing talent within the department.
• Hires and trains the estimating department staff.
• Oversees the workflow and schedules of the department.
• Promotes collaboration between estimating staff, business development, marketing, and engineering teams.
• Conducts performance evaluations that are timely and constructive.
• Handles discipline and termination of employees in accordance with company policy.
• Visit Canada & Texas Offices a minimum of (1) Week every (2) Months to review current projects and instill a culture for the engineering teams.
• Establishes and institutes procedures for estimating team to adhere to both from a technical perspective and a financial perspective.
• Manage relationships with external customers and business development manager to ensure cost effectiveness for the business and the customer.
• Be responsible for watching technology trends and preparing cost reduction and other business recommendations based on those trends.
• Work with other departments to refine product estimates to establish standards for all products with regards to both products and labor hours.
• Perform final review of all estimates prior to sending to customer or the next layer for approval.
• Review proposals from a holistic view-point to ensure customer confidence and competitiveness within the market segment.
• Review terms and conditions at a high level for all estimates and approve based on limits of authority.
• Develops strong relationship with clients to create depth in the relationship and serves as an expert on product capabilities.
• Read and interpret documents to understand customer requirements, determine scope of work, and assess the company’s ability to bid the project.
• Perform initial review of bid opportunities with team to confirm bid opportunity is a fit for the company and if alternate solutions can be suggested to the customer.
• Promote creative ideas within department to position proposal to be highly accurate and attractive to the end customer.
• Maintain accurate pricing for internal database in coordination with purchasing department.
• Propose ideas and suggestions for areas of improvement to standardize bid process and reduce overall cycle time.

Responsibilities:

• Bachelors degree in Engineering, Construction Management, or related field.
• 8+ years of experience in estimating preferably in the electric utility industry.
• 8+ years of experience in a leadership capacity.
• Strong supervisory and leadership skills.
• Ability to read mechanical and electrical drawings, schematics, and diagrams
• Ability to read and understand Commercial Documents
• Excellent written and verbal communication skills
• Excellent organizational skills and attention to detail
• Able to multi-task, prioritize, and manage time efficiently
• Strong critical thinking skills and ability to make independent judgments
• Excellent interpersonal and customer service skills
• Proficient with Microsoft Office Suite (Word, Excel and Outlook) and other related programs (AutoCAD, Solidworks)

Full Benefits:

• Full Benefits (Medical, Dental, Vision)
• 401K+ Matching
• Bonus
• PTO
• Life Insurance
• Tuition Reimbursement

Director/Regional VP of Operations - General Contractor - Education Sector - DSA

Overview

Our client, a highly respected General Contractor, is seeking an accomplished Project Leader to take on a VP/Director of Operations role on their leadership team in Southern California. This firm is well known for delivering high-quality construction projects across multiple sectors — including DSA regulated K-14 education, OSHPD/NCAI regulated healthcare, and many other institutional & commercial facilities.

Must Haves

• Minimum of 15 years of experience managing large-scale construction projects with increasing responsibility.
• Bachelor’s degree in Construction Management, Engineering, or a related field.
• Demonstrated success leading operations or large project portfolios exceeding $100M in total value.
• Strong background in general contracting with expertise in preconstruction, estimating, and project delivery.
• Exceptional leadership skills with a track record of mentoring and developing project management teams.
• Proven ability to manage client relationships, negotiate contracts, and maintain strong partnerships with owners, architects, engineers, and trade partners.
• Deep understanding of risk management, cost control, scheduling, and operational strategy.
• Proficiency with Microsoft Office Suite and industry-standard construction management software.
• Excellent communication, presentation, and decision-making skills.
• Unwavering commitment to safety, quality, and team success.

Nice to Haves

• Experience in K-14 education, civic, and healthcare construction environments.
• Prior experience in a regional or divisional operations leadership capacity.
• Advanced degree (MBA, MS in Construction Management, or similar).
• Familiarity with lean construction methodologies and continuous improvement frameworks.
• Proven success implementing operational efficiencies or standardization initiatives.
• Active involvement in professional associations or community organizations.
• Familiarity with California DSA (Division of the State Architect) processes and compliance.

Responsibilities

• Lead and oversee regional operations to ensure projects are executed safely, efficiently, and profitably.
• Provide strategic direction, leadership, and mentorship to project management and field operations teams.
• Collaborate with executive leadership to develop and implement company-wide initiatives, strategic plans, and growth objectives.
• Foster a culture of accountability, innovation, and continuous improvement.
• Partner with pre-construction, estimating, and business development teams to align project opportunities with company goals.
• Build and maintain long-term relationships with key clients, consultants, and trade partners.
• Drive operational consistency across teams and promote best practices in project delivery.
• Identify and mitigate risks while ensuring adherence to contractual, financial, and safety obligations.
• Represent the company in industry and community forums to strengthen its market presence.
• Champion the organization’s core values.