Engineering Jobs in Joppatowne Maryland Flexible

Job Opportunity - Electrical Engineer

Location : New Freedom, PA

Duration : Full Time

Position Summary

The Electrical Engineer will support product optimization initiatives through design analysis, component evaluation, simulation, and testing activities. This role involves reviewing existing product designs, identifying opportunities for component standardization, conducting simulations, and supporting testing and troubleshooting of electrical systems, including 3-phase systems. The ideal candidate is detail-oriented, technically sound, and eager to contribute in a collaborative engineering environment.

Key Responsibilities

• Research and analyze existing product designs to identify redundant components and recommend design optimizations.
• Review and analyze Bills of Materials (BOMs) to identify opportunities for component commonization and cost reduction.
• Interpret technical drawings, schematics, and electrical documentation accurately.
• Perform circuit simulations to evaluate the feasibility of component substitutions and validate design changes.
• Participate in testing and troubleshooting of 3-phase electrical systems, proactively identifying and resolving issues under the guidance of senior engineers.
• Utilize test equipment such as oscilloscopes, power analyzers, and related diagnostic tools.
• Maintain comprehensive documentation of design modifications, simulations, test procedures, and results.
• Collaborate with cross-functional teams to ensure design integrity and compliance with applicable standards.

Required Qualifications

• Bachelor’s degree in Electrical Engineering or a related discipline.
• Solid understanding of fundamental electrical engineering principles.
• Strong analytical skills with attention to detail.
• Ability to read and interpret technical drawings, schematics, and BOMs.
• Familiarity with electrical test equipment such as oscilloscopes and power analyzers.
• Knowledge of electrical components and systems.
• Strong communication and teamwork abilities.
• Willingness to learn and adapt in a fast-paced engineering environment.

Preferred Qualifications

• Hands-on experience in electrical testing and troubleshooting, including independent resolution of circuit- and system-level issues.
• Experience with circuit simulation tools such as SPICE or Saber.
• Familiarity with applicable industry standards and regulatory requirements.
• Exposure to 3-phase motors and related systems.

Job Opportunity - Electrical Engineer

Location : New Freedom, PA

Duration : Long term

Position Summary

The Electrical Engineer will support product optimization initiatives through design analysis, component evaluation, simulation, and testing activities. This role involves reviewing existing product designs, identifying opportunities for component standardization, conducting simulations, and supporting testing and troubleshooting of electrical systems, including 3-phase systems. The ideal candidate is detail-oriented, technically sound, and eager to contribute in a collaborative engineering environment.

Key Responsibilities

• Research and analyze existing product designs to identify redundant components and recommend design optimizations.
• Review and analyze Bills of Materials (BOMs) to identify opportunities for component commonization and cost reduction.
• Interpret technical drawings, schematics, and electrical documentation accurately.
• Perform circuit simulations to evaluate the feasibility of component substitutions and validate design changes.
• Participate in testing and troubleshooting of 3-phase electrical systems, proactively identifying and resolving issues under the guidance of senior engineers.
• Utilize test equipment such as oscilloscopes, power analyzers, and related diagnostic tools.
• Maintain comprehensive documentation of design modifications, simulations, test procedures, and results.
• Collaborate with cross-functional teams to ensure design integrity and compliance with applicable standards.

Required Qualifications

• Bachelor’s degree in Electrical Engineering or a related discipline.
• Solid understanding of fundamental electrical engineering principles.
• Strong analytical skills with attention to detail.
• Ability to read and interpret technical drawings, schematics, and BOMs.
• Familiarity with electrical test equipment such as oscilloscopes and power analyzers.
• Knowledge of electrical components and systems.
• Strong communication and teamwork abilities.
• Willingness to learn and adapt in a fast-paced engineering environment.

Preferred Qualifications

• Hands-on experience in electrical testing and troubleshooting, including independent resolution of circuit- and system-level issues.
• Experience with circuit simulation tools such as SPICE or Saber.
• Familiarity with applicable industry standards and regulatory requirements.
• Exposure to 3-phase motors and related systems.

Job Description

Job Summary:

Manages a team of chemists/scientists/technicians and executes pressure sensitive adhesive (PSA) tape prototype development, scale-up, and product launch in various applications. The group leader will focus on platform technology development, new product development for customer-driven projects, as well as continuous improvement and cost reduction of existing products and processes. Emphasis on acrylic polymer synthesis, silicone and rubber adhesive formulations, PSA rheology, knowledge of tape assemblies, backing material selection, and release liner familiarity. Works with customers and AR teams to collect design input and develop new product design strategies. Technical and laboratory lead in developing new adhesive solutions, robust products, and basic production processes that can be successfully commercialized.

Essential Functions:

• Establishes and directs research programs for new product development and product/process improvement of current products. Responsible for complex basic research and/or product development projects.
• Leads lab personnel and facilitates development of product constructions and processes; designs & conducts chemical experiments on both lab- and production-scale; designs and specifies production scale processes and contributes to product validation.
• Conducts and directs required laboratory work to develop new PSA and tape assemblies including polymerization, formulation, coating and testing. Develops new products that lead to sustainable commercial revenue.
• Completes any necessary regulatory forms. Ensures team follows similar protocols and procedures.
• Implements and executes product development to align with Stage Gate timelines and sets prioritization with the Director of Innovation and Product Management team. Meets technical commitments in order to complete project progression dates and milestones on time.
• Drives patent strategy (reading, planning, and execution) within the team to align with goals established by the Director of Innovation.
• Consults with Director of Innovation, Product Management, Operations, Quality and Sales personnel on group priorities and strategy. Active role in setting overall Innovation direction & strategy. Participates in business planning process with one or more business as appropriate. Establishes program priorities, objectives and responsibilities for group. Ensures effective communication of Innovation program progress for own work and for overall group.
• Functions as a technical lead on product development teams. Leads cross-functional product development teams to ensure effective prototype development, to drive prototypes to commercial products, and to translate findings into impactful business revenue.
• Participates and occasionally leads establishment and implementation of R&D policies and procedures. May be responsible for specified lab areas.
• Interfaces with customers on new product applications and networks externally to assure highest level of competence is maintained.
• Develops skills within the team and evaluates performance of department personnel. Mentors and and coaches associates to effectively work in the department in addition to promoting a collaborative work environment (within the department and cross-functionally). Executes performance reviews annually.
• Makes identifiable and substantial contributions to continuous improvement. Performs all duties consistent with established AR guidelines consistent with ISO-9001 and those elements of GMP deemed necessary to support our business (as outlined in the Quality Manual). Actively complies with and endorses Department and Company objectives.
• Responsible for the proper disposal of hazardous waste into the proper labeled containers and drums.

Additional Responsibilities:

• Perform other related duties as assigned by management.

Job Specifications:

• BS degree (or higher) in chemistry, chemical engineering, polymer science or materials science and/or significant industrial experience. Ph.D. degree preferred but not required.
• Greater than 3 years adhesive formulation, mixing process and coating process experience. Demonstrates detailed knowledge of required chemical and physical test methods for PSA characterization. Requires an aptitude to use sensitive test equipment.
• Basic understanding and familiarity with adhesive chemistries and coating technologies. Familiarity and understanding of various adhesive chemistries (acrylic, silicone, rubber).
• Understanding of adhesive tape constructions (backing materials, release liner selection, adhesive chemistries, etc.)
• Knowledge of PSA rheology, dynamic mechanical analysis, and other physical polymer characterization methods
• Supervisory experience preferred with experience managing a team of scientists in product development, technology platform expansion, and patent filing.
• Demonstrated technology and/or product development capability.
• Expertise required in Stage Gate processes and how to move projects through the pipeline with discipline, efficiency, and accountability
• Excellent program prioritization and coordination skills, ability to manage multiple priorities
• Ability and willingness to work effectively in a diverse, disciplined team environment with limited supervision. Ability to work independently and drive project execution with limited guidance.
• Excellent program prioritization and coordination skills, ability to manage multiple priorities.Agility to adapt and shift to changing priorities, proactively anticipating obstacles, and flexibility to seek out alternative solutions when faced with meeting customer design inputs and timelines
• Must communicate fluently in English
• Ability to maintain confidentiality of AR information
• Excellent oral & written communication skills
• Excellent interpersonal skills
• Knowledge of computers & related word processing, spreadsheet & e-mail software – Microsoft preferred
• Ability to employ statistical analysis techniques. Familiarity with design of experiments software and set-up, ability to employ statistical analysis techniques
• Ability to develop and present effective technical presentations to internal and external customers.

We're seeking a knowledgeable and detail-oriented Heat Treat Process Engineering Supervisor to lead and support all aspects of the heat treatment operations with a focus on quality, compliance, and continuous improvement.

POSITION SUMMARY:

The Heat Treat Process Engineering Supervisor serves as a technical expert responsible for ensuring the proper thermal processing of materials to meet metallurgical and production requirements meeting all CQI-9 requirements. This role includes overseeing furnace operations, audits, documentation, process control, equipment maintenance, and continuous improvement initiatives.

The ideal candidate will have strong metallurgical knowledge, heat treat process experience, the ability to troubleshoot equipment and process issues, and the ability to manage compliance in a dynamic manufacturing environment. This role has direct supervisory responsibility for Lab Technicians, including scheduling, performance management, training, and ensuring compliance with laboratory testing standards and metallurgical validation requirements.

ESSENTIAL DUTIES (Complete):

• Oversee and manage daily heat treat operations including carburizing, hardening, tempering, and stress relieving
• Ensure compliance with AIAG CQI-9: Heat Treat System Assessment (HTSA) and other applicable standards
• Implement and maintain heat treat process control plans per AIAG guidelines
• Conduct and lead CQI-9 self-assessments, audits, and ensure closure of gaps and non-conformances
• Ensure proper setup, calibration, and operation of furnaces and quench systems
• Monitor thermal cycles and maintain control charts, pyrometry data, and process records per CQI-9
• Support system accuracy tests (SAT), temperature uniformity surveys (TUS), and instrumentation calibration activities
• Ensure all documentation meets internal and customer-specific AIAG compliance requirements
• Collaborate with Engineering, Maintenance, and Quality to address process improvements and problem-solving
• Perform metallurgical inspections including hardness testing and microstructure verification
• Provide technical guidance to operators and maintenance personnel on best practices
• Develop and optimize heat treat process parameters including atmosphere control, quench severity, and thermal cycle design to meet metallurgical and dimensional requirements
• Atmosphere verification (Carbon Potential, Dew Point, etc.)
• Distortion Mitigation Strategy
• Develop, implement, and maintain training programs to ensure team competency on heat treat systems and compliance
• Lead root cause analysis and corrective action efforts for heat treat-related non-conformities
• Utilize Lean Six Sigma principles to drive cost reduction, efficiency, and quality improvements
• Maintain proper traceability and process documentation for internal and external audits
• Provide technical direction for furnace troubleshooting, repair validation, and upgrade initiatives in coordination with Maintenance
• Perform other duties as assigned or required in support of production and quality goals
• Directly supervise Lab Technicians, including daily work assignments and workload balancing
• Approve timecards, PTO, and manage attendance
• Perform other duties as assigned or required in support of production and quality goals

CORE COMPETENCIES:

• Action oriented: Demonstrates ownership in solving process and compliance issues
• Self-Motivated: Demonstrates ability to take initiative and drive to achieve results. Proactively drives conformance with CQI-9 requirements and continuous improvement
• Accountability: Demonstrates ability to take responsibility and maintains sense of ownership and follow through on commitments. Sets high standards of performance.
• Communication: Demonstrates ability to convey and distribute information effectively and encompass strong speaking, presentation, written and listening skills. Ability to create an environment for open communication, and communicates clearly across departments regarding heat treat and compliance status
• Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
• Leadership: Demonstrates ability to give direction, motivate, manage and reward performance, provide constructive feedback and foster individual professional development. Trains and guides operators to follow standard operating procedures and compliance guidelines
• Reliability: Demonstrates dependability, accountability and trust. Follows processes and meets commitments. Delivers consistent process performance and regulatory documentation
• Decision-making: Demonstrates ability to discover opportunities in challenges, seek profit and sustainable growth, make courageous while sound decisions and demonstrate a good business understanding. Applies analytical skills and CQI-9 knowledge to make data-driven decisions

KNOWLEDGE, SKILLS & ABILITIES:

• Thorough understanding of heat treatment principles, metallurgy, and thermal processing equipment
• Working knowledge of CQI-9 audits, checklists, gap closures, and AIAG documentation practices
• Familiarity with control system troubleshooting, PLCs, HMIs, and data logging
• Ability to supervise, mentor, and train heat treat personnel on compliance, safety, and process controls
• Skilled in conducting microstructure analysis and hardness testing to validate process results
• Strong organizational and record-keeping skills for always maintaining audit-readiness
• Proficiency in Lean Manufacturing, 5S, and Continuous Improvement
• Physically capable of working in a high-temperature, industrial environment
• Commitment to upholding process integrity and product conformance to specification

WORKING ENVIRONMENTAL CONDITIONS:

• Work involves exposure to high-temperature equipment, hot surfaces, and industrial environments. May encounter fumes, noise, and moving machinery. Personal protective equipment (PPE), including heat-resistant gloves, face protection, and hearing protection, is required. Occasional exposure to quenchants, chemicals, and elevated platforms is expected. Safety training and environmental awareness are critical components of the role.

SUPERVISORY RESPONSIBILITY:

• This role has direct supervisory responsibilities.

The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

QUALIFICATIONS:

• Bachelors degree in Mechanical, Materials, Metallurgical, or Manufacturing Engineering required.
• Materials Science or Metallurgical Engineering preferred
• 7+ years of hands-on heat treat or metallurgical experience, preferably in automotive or aerospace manufacturing
• Demonstrated knowledge and application of CQI-9 Heat Treat System Assessment requirements
• Familiarity with AIAG standards and automotive core tools (APQP, PPAP, FMEA, SPC, MSA)
• Experience conducting and documenting SAT, TUS, and other pyrometry-related activities
• Experience operating batch and continuous furnaces, quench systems, and thermal processing equipment
• Demonstrates ability to directly supervise lab personnel including assigning work, evaluating performance, managing corrective actions, and developing team capabilities.
• Creates accountability, enforces standards, and drives measurable performance improvements.
• Proficient in hardness testing, blueprint reading, GD&T, and metallurgical inspection techniques
• Strong computer skills including Microsoft Office and plant data collection systems
• Excellent troubleshooting, documentation, and analytical skills
• Commitment to safety, quality, and environmental standards
• Ability to lead and train team members on technical and compliance-related topics
• Ability to work independently, manage multiple tasks, and prioritize effectively

Compensation details: 96 Yearly Salary

PI34bc9acf25ca-26289-39818891

Job Summary:

This is a full-time position responsible for managing projects that support our manufacturing equipment and facilities.

Essential Functions:

• Manage and execute small to mid-size capital projects.
• Prepare user and functional specifications, project plans, scopes of work (SOW) and requests for quote (RFQ) documents.
• Identify manufacturers, suppliers, integrators and contractors. Obtain and review competitive bids.
• Submit purchase requisitions and track costs.
• Plan, schedule and coordinate installation, commissioning and qualification activities.
• Prepare change control documentation, work instructions, equipment installation and operational qualification protocols, and summary reports as required.
• Ensure safety is designed into equipment.
• Ensure long-term maintenance and reliability practices are established.
• Assist lead engineers in the execution of large capital projects.
• Contribute technical expertise to improve equipment reliability and performance.
• Provide engineering solutions to address repetitive failures and other problems.
• Work closely with process owners on continuous improvement projects.
• Support maintenance, production and project management.
• Communicate effectively with AR associates, suppliers, contractors, and customers.
• Conduct yourself in a professional, respectful manner consistent with AR Guiding Principles, and embrace 6S LEAN culture.
• Perform other related duties as assigned.

Job Specifications:

• B.S. degree in Engineering
• A self-starting team player that can handle multiple and changing priorities
• Strong problem solving, decision making, and project management skills
• Strong analytical and computer skills
• Sound organization and communication skills
• Communicate fluently in English
• Tolerate odors and noise associated with manufacturing operations
• Travel throughout the manufacturing areas, buildings and campus to allow personal observations of equipment and facilities associated with responsibilities
• Travel to customer and vendor facilities as required
• Accommodate a flexible work schedule
• Proficiency in computer programs for engineering such as Office 365 applications and AutoCad

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.

In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.

This position is in McKinney Texas

What You Will Do

• Reading contracts for understanding of the deliverables
• Working in a PDM system to capture, manage, and track data deliverables and/or receivables
• Coordinating with cross-functional teams to obtain requested data
• Proofreading data for compliance to the requirement(s)
• Managing the data deliverable schedule and providing the data to the customer on-time
• Learning and understanding contractually required markings applied to data
• Running forecast reports and providing them to the appropriate stakeholders
• Providing metrics related to on-time deliveries and outstanding dispositions upon request
• Reviewing and approving sub-tier supplier statements of work for data requirements
• Supporting program meetings and providing training to program personnel and customers and/or suppliers
• Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information

Qualifications you must have

• Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
• Minimum of 2 years’ experience related to data management and/or equivalent professional experience
• Minimum of 2 years’ experience in a customer support/service role 

Qualifications We Value

• Knowledge of U.S. government defense contracts
• Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
• Collaborate in a team environment
• Self-motivated and detail oriented
• Proven excellent oral and written communication and presentation skills
• Excellent proofreading skills

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.

In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.

This position is in McKinney Texas

What You Will Do

• Reading contracts for understanding of the deliverables
• Working in a PDM system to capture, manage, and track data deliverables and/or receivables
• Coordinating with cross-functional teams to obtain requested data
• Proofreading data for compliance to the requirement(s)
• Managing the data deliverable schedule and providing the data to the customer on-time
• Learning and understanding contractually required markings applied to data
• Running forecast reports and providing them to the appropriate stakeholders
• Providing metrics related to on-time deliveries and outstanding dispositions upon request
• Reviewing and approving sub-tier supplier statements of work for data requirements
• Supporting program meetings and providing training to program personnel and customers and/or suppliers
• Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information

Qualifications you must have

• Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
• Minimum of 2 years’ experience related to data management and/or equivalent professional experience
• Minimum of 2 years’ experience in a customer support/service role 

Qualifications We Value

• Knowledge of U.S. government defense contracts
• Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
• Collaborate in a team environment
• Self-motivated and detail oriented
• Proven excellent oral and written communication and presentation skills
• Excellent proofreading skills

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms