Engineering Jobs in Jackson Center, OH

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

Manage and improve production line productivity and quality relative to cutting tool designs to achieve manufacturing characteristic improvements. 

• Lead tool budget creation, control, and analysis to evaluate cutting tool budget
• Lead/coordinate daily engineering support troubleshooting tooling problems to achieve quality, cost and delivery targets; develop and maintain tools, tool drawings and holder
• Perform and coordinate tool analysis - documenting and reporting the results for continuous improvement through the use of sound engineering theory and technology to improve running characteristics (SEQDCM)
• Coordinate the development of cutting tools, tool holders, and machining process for new model, capacity up, and new technology implementation
  Provide technical support for internal tool setup and tool regrind processes
• Support line side trial runs during tool test and new models to ensure quality and delivery is achieved
• Lead collaborative meetings & negotiate with customers/suppliers of all levels & capabilities
• Communicate and present technical issues and tool reports to audiences of all backgrounds and levels
• Work with production, new model, machining, product development and other engineering to ensure balanced processing occurs
• Build mutually beneficial relationships with customers and suppliers
• Develop, manage and execute Business Plan activities in a timely manner

Minimum Education: 

• Bachelors Degree in Engineering (e.q. Mechanical, Electrical).

Minimum Experience:

• 2-8 years of experience in equipment engineering

Other Job-Specific Skills:

• Knowledge of: Microsoft Office, AutoCad 2D & 3D, Solidworks.
• Skill In: Presenting, written communication, organizational skills.
• Ability to: Convey manufacturing concepts to associates, perform advanced mathematics, read engineering designs, manage projects.

Please Note: Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered. 

• 40% Office environment & 60% Production Floor implementing projects and/or countermeasures
• 1-2 day trips approximately 3 times per year. Potential overseas travel for 2-4 weeks at a time with New Model
• 5-12 Hours overtime per week / Some weekends and holiday/shutdown work as needed.

What differentiates Honda and make us an employer of choice?

Total Rewards:

• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
• Paid Overtime
• Regional Bonus (when applicable)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) 
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability 
• 401K Plan with company match + additional contribution
• Relocation assistance (if eligible)

Career Growth:

• Advancement Opportunities
• Career Mobility 
• Education Reimbursement for Continued Learning
• Training and Development Programs 

Additional Offerings:

• Tuition Assistance & Student Loan Repayment
• Lifestyle Account
• Childcare Reimbursement Account
• Elder Care Support
• Wellbeing Program
• Community Service and Engagement Programs
• Product Programs

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Job Purpose

Support department and plant environmental regulatory compliance (CAA, CWA, RCRA, EPCRA, SWPPP,SPCC) and sustainability performance (energy/water/waste resource reduction and efficiency) programs through data analysis, program development and execution, facilitation and promotion, in alignment with regulatory requirements, plant business plan, and company direction to ensure environmental compliance and to achieve environmental targets.

Key Accountabilities

• Lead dept & support plant environmental communication and collaboration for awareness of status, benchmarking, critical issue escalation, initiation of necessary action items and promotion/ diffusion of environmental programs.
• Develop and implement dept & plant processes to comply with environmental regulations/Honda standards. Support implementation of plant standards.
• Develop, manage, and implement department Environmental business plan themes and projects, support plant Environmental Business Plan Themes and projects, track, and report department performance metrics by applying PDCA to reduce risk and improve environmental characteristics.
• Develop energy, water and waste targets, analyze data and trends for gaps, report on results, implement countermeasures to mitigate gaps. Identify and implement improvement ideas and projects to reduce Honda’s environmental impact.
• Draft and implement department & plant environmental procedures and methods to meet government regulations and company standards as well as other environmental obligations.
• Act as liaison between dept and plant environmental team for dept projects and change points to ensure environmental policy and direction is implemented and achieved.
• Create and perform environmental training content and assign/track department & plant training requirements to improve associate competence.
• Support the development and deployment of data management systems to efficiently track and manage environmental compliance/performance.
• Coordinate assigned contractor SOW(s) (Scope of Work) (e.g. waste management, wastewater operations, water treatment operations, stack testing, consultants, utilities) to support environmental strategies/requirements and ensure ongoing contractor performance.
• Perform and document environmental compliance activities (sampling, checks and inspections) per plant and department procedures related to compliance with CAA, CWA, RCRA, EPCRA, SWPPP, SPCC regulations to fulfill recordkeeping requirements, reporting obligations and company objectives
• Conduct performance inspections(energy, water, waste and data) to identify gaps and opportunities for improvements in the environmental program, ; support ISO 14001 audits, compliance audits and support external audits (government agencies, third party ISO Auditors and RO-Regional Operations Auditors) of the department to ensure Honda's Environmental program is accurately represented.
• Coordinate and implement timely department countermeasures addressing environmental audit & compliance gaps to ensure effectiveness of environmental program.
• Develop capability of self, colleagues, and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding for succession planning and team growth.
• Implement innovative solutions to drive improvements and be recognized as a leader in environmental sustainability.

Qualifications, Experience, and Skills

Minimum Educational Qualifications -Bachelor’s degree in Engineering, Environmental Science, or science-related degree or equivalent related experience

Minimum Experience  0-4 years of environmental experience

Other Job-Specific Skills ·

Experience using Microsoft Office products. · Effective communication and presentation skills. · Ability to manage and lead projects · Ability to work well in a collaborative environment. · Effective planning and prioritization skills. · Reliable and flexible. · Strong data analysis and problem-solving skills. · Ability to work effectively with contractors and production associates. · General knowledge of environmental compliance requirements · Some understanding of business plan, budgeting and cost reporting · Ability to support root cause analysis and implement countermeasures

Working Conditions

Ability to work overtime (~0-4 hrs/week)

Ability to work in an office and plant environment.

Willingness to work appropriate weekends/shutdowns to manage projects and cover environmental needs.

Minimal travel requirements (possible 1 trip/year) 

What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

Job Purpose:

Lead and manage New Model or Business Plan project activities through strategy, planning, communications, and execution to achieve project, department, and plant Safety, Environment, Quality, Delivery, Cost and Morale (SEQDCM) objectives and targets.

Key Accountabilities:

• Create and manage department A00's and strategies to achieve overall plant targets and improve manufacturing characteristics while developing new model.
  Develop and coordinate (manage) the overall Specified Action Plan (SAP) to ensure all New Model (NM) and project activities are executed as required to achieve project milestones and targets.
• Lead and support new model project evaluation materials (i.e. E-Flow, QAV, 5-step) that meet the requirements of the plant evaluations to gain project approval.
• Lead new model genba activity as needed to reduce investment and improve manufacturing characteristics. Manage new model or mass production design change to understand impact to department.
• Test, evaluate and implement new and innovative technologies to drive continuous process and equipment improvements thru new model flow. Ensure new or modified equipment or processes meet all required specifications and standards at new model mass pro start up.
• Plan and execute new model build events through correlation with internal and external groups to assure new model processes, quality, associate training and equipment maturation. Utilizing
• PDCA thru the build event process and new model mass pro start up.
• Support new model investment and expense budgets to achieve overall project cost target and future operating costs.
• Mentor associates within the group on problem solving, procedures and fostering development.

Qualifications, Experience, and Skills

Minimum Educational Qualifications:
Bachelor’s degree in a related field or equivalent related job experience (high speed, mechanical related manufacturing).

Minimum Experience:
2-6 years of applicable experience with quality specifications, Honda quality systems, and technical drawings.

Please Note: Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered. 

Other Job-Specific Skills:

• Ability to review and analyze part drawings, technical documents, and reports for change points and specification related characteristics and understanding the impact to Assembly manufacturing equipment and processes.
• Capable of communicating with all levels of associates and suppliers related to the technical aspects of the new model project.
• Must have demonstrated strong problem solving / root cause analysis skills.
• Capable of leading and mentoring multiple associates.
• Capable of delivering meeting information to diverse groups of associates including production associates and engineers.
• Must have a functional understanding of engines and extensive knowledge of potential process quality knowledge vs product quality knowledge that can be caused from equipment or associate interaction with the parts.
• Ability to effectively communicate desired line characteristics of our products to all levels of associates.
• MUST HAVE DEMONSTRATED THE ABILITY TO DESIGN, PROCURE, VERIFY, AND CONDUCT TRIALS FOR EFFECTIVENESS WITHOUT SUPERVISION.

Working Condition:

• Overtime: 5-10 hrs/week during peak activity periods with need to adjust time to support needed activity and meetings.
• Onsite: Open office environment with moderate level of noise and activity
• Travel – Domestic / International as needed.
• Manufacturing Environment – High Paced manufacturing can be stressful to work in.

What differentiates Honda and make us an employer of choice?

Total Rewards:

• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
• Paid Overtime
• Regional Bonus (when applicable)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) 
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability 
• 401K Plan with company match + additional contribution
• Relocation assistance (if eligible)

Career Growth:

• Advancement Opportunities
• Career Mobility  
• Education Reimbursement for Continued Learning
• Training and Development programs 

Additional Offerings:

• Tuition Assistance & Student Loan Repayment
• Lifestyle Account
• Childcare Reimbursement Account
• Elder Care Support
• Wellbeing Program
• Community Service and Engagement Programs
• Product Programs

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a Honda

Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. 

 At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

The Electrical Controls Design role provides high-quality, reasonably priced, on-time hardware, software,and safety design solutions to ensure stable new model and new technology introduction in all HDMANorth American manufacturing facilities.

• Work in an engineering team atmosphere, understand design requirements to create/modify automated production equipment. 
•  Conduct electrical controls design for automated equipment to generate hardware drawings to be used to assemble/build/wire a full controls system for production equipment 
•  Conduct electrical design to produce engineering software to create the control architecture for production equipment processes. (i.e. PLC, HMI, Motion Control, and Robotic programming). 
•  Provide on-site support to install, system up, and mature the control system for production equipment. 
•  Create and maintain a critical path schedule for work assignments to produce the control system design deliverables to achieve the overall project milestones for small to medium projects/ low to medium complexity. 
•  Conduct and attend design reviews to ensure design standards are achieved and design meets specification requirements for work assignment deliverables.
•  Continuously apply an engineering mindset to learn new skills/processes/technology to expands one knowledge base in relevant manufacturing technologies

Minimum Educational

Qualifications: 4-year Bachelor of Science degree in Electrical Engineering or 2-year Electrical-related degree with additional work experience.

Minimum Experience: 0-2 years of experience, Co-op experience preferred

Other Job-Specific Skills:

•  Knowledge of machine safety regulations.
• Knowledge of NEC/NFPA 79 standards. 
• Servo position control experience. Robotic integration experience.
• Field I/O networking experience.
• Project management capabilities.
• Basic background in automated equipment electrical hardware/software design.
• Knowledge of PLC and HMI hardware and software functions.

• 75% Office environment - Design.
• 25% Manufacturing floor – Installation / System up / Maturation
• Must be willing to conduct physical confirmations in the manufacturing environment and conduct testing/debug on the manufacturing floor and/or at vendor sites.  Sometimes on weekends.
• Travel up to 20% (North American Manufacturing Plants)
• Potential for International Travel
•  Average work week is 45~48 hours (some weekends and 1 week shutdowns twice per year)

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

Controls Engineer responsible for planning and implementation to upgrade existing and install new building controls utilizing self, team, and contractor abilities. Design Mechanical systems, develop schedules, budgets and forecasts, select materials, equipment, project staff and contractors.  Estimate costs, resources and time required to complete. Ensures controls architecture consistency between sites and analyzes technology trends. Includes focus on development and sustainability of the mechanical infrastructure (HVAC, Chillers, Air compressors, Utilities). Direct site building control related activities, through team members and contractors, to meet site needs (e.g. controls upgrade and replacements, programming optimization, standardization, and operations enhancements). Focus is to maximize cost efficiency and usability while minimizing risk to production and maintenance downtime. Job requires constant interaction with department's engineering and maintenance teams along with external customers and contractors.

This position will be joining the Facilities department in Honda Development & Manufacturing of America, LLC’s (HDMA). The Facilities department is responsible for the building which includes new construction, remodels, utility management (electric, compressed air, natural gas, water), building maintenance, end-of-life equipment replacements and upgrades. The goal of the department is to create a facility that we are proud of and to serve our customers.

• Manage BMS/BAS(Building Management System/Building Automation Systems) specification, design, and operation. Develop and implement multiyear strategy to complete BMS migration. Collaborate with HDMA Facilities controls leaders to standardize a unified approach. Manage and oversee programming and work with IT networking team.
• Support operation of Facilities mechanical and electrical systems including but not limited to centrifugal fans, burners, cooling/heating coils, pumps, centrifugal air compressors, centrifugal chillers, heat exchangers, utilities, metering, communications. Manage and maintain documentation for the site Mechanical Systems.  Communicate critical updates to site system operators.
• Implement new engineering strategies and technologies to replace facilities equipment and systems at their end of life (EOL)
• Lead meetings and negotiate with customers and contractors of all levels and capabilities. Build mutually beneficial relationships with customers and contractors.

Minimum Educational Qualifications

Bachelor of Science degree in Engineering (in Mechanical, Controls or Electrical) or equivalent related controls experience

Minimum Experience

2+ years of relevant working experience in a Controls/Project Management/Facilities Capacity preferred

2+ years working experience with control systems architecture and programming preferred

Other Job-Specific Skills

Use knowledge and experience to continually improve efficiency and effectiveness of tasks within area of expertise

Actively support / participate in project team activities related to significant business innovation; develop and execute activities/tasks to achieve the objectives of the business team

Demonstrate solid base of technical knowledge in day-to-day operations

Willingness to travel for department reviews and business planning events at other HDMA facilities 

50% Manufacturing/Production Environment including construction site locations, 50% office/desk environment § Potential for assignments supporting other HDMA Facilities, Honda Affiliates, or North American Suppliers 

Work all appropriate overtime/weekends/shutdowns to manage projects and cover production needs. 

What differentiates Honda and makes us an employer of choice?

Total Rewards: 

• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
• Regional Bonus (when applicable)
• Manager Lease Car Program (No Cost - Car, Maintenance, and Insurance included)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability 
• 401K Plan with company match + additional contribution
• Relocation assistance (if eligible)

Career Growth:

• Advancement Opportunities
• Career Mobility
• Education Reimbursement for Continued learning
• Training and Development Programs 

Additional Offerings:

• Lifestyle Account
• Childcare Reimbursement Account
• Elder Care Support
• Tuition Assistance & Student Loan Repayment
• Wellbeing Program
• Community Service and Engagement Programs
• Product Programs

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

Job Purpose

Effectively lead multi-disciplinary facility electrical engineering projects with capabilities to implement and communicate an operational plan for completing a project, monitor progress and performance against the project plan; resolve operational problems, minimize delays, develop, and gather necessary resources to complete the project. Project scope includes current situation assessment, design, coordination, electrical capacity, coordinate process demand with current infrastructure capacity.  Productively manage workload to successfully complete end of life, new investment, and customer driven projects.  Systemize, standardize, and simplify the electrical projects.

Act as Subject Matter Expert (SME) to Lead/Support multidisciplinary facility projects and systems (PLC, variable speed drive, motors, arc-flash, etc.) by successfully performing electrical engineering responsibilities. Specialty topics may include, but not limited to electrical utilities (supply and distribution, lighting, fire detection and alarm, etc.) Work with contractors to verify that the design and construction meet specifications, code, and performance expectations. Monitor progress and performance against the project plan; resolve operational problems, minimize delays, identify, develop, and gather necessary resources to complete the project.

Analyses current operating conditions and recommends new preventative and proactive methods for maintaining and monitoring facilities systems. Evaluates facility standards and practices to improve maintenance procedures and ensure optimal operational efficiency. Involved in business planning process and long-term investment planning. Participates in the planning and installation of new facility systems and provides knowledge of maintenance, repair, and operations for various infrastructure, equipment, and building disciplines.

Key Accountabilities

• Utility Management – Manage utility infrastructure reliability, capacity, and safety. Assess utility capacity versus demand and analyze operational trends. Plan and execute necessary utility outage activities, including appropriate customer communication and support. Evaluate new technology and manage system end-of-life characteristics, seeking opportunities for utility infrastructure innovation. Apply electrical and facilities expertise and facilitate the sharing of knowledge and best practice.
• Technical Project Management - Work with internal customers and external consultants, contractors, and suppliers to develop initial concept, specification, design, procurement scope, fabrication/construction, and installation-related documents. Communicate and work with department design team members, bringing technical expertise and knowledge to projects, and managing the overall execution of projects.
• Budget Management -- Maintain organizational budgets for capital investment and expense activities, such as maintenance and repair of facility assets and contracted support services. Budget responsibilities include formulating requests, tracking expenditures, analyzing trends, and adjusting budgets to address business needs.
• Contract Management -- Arrange and manage appropriate contracted services support, as needed. Ensure all work meets or exceeds defined organization targets. Manage work to ensure all deliverables comply with associated contract documents, codes and regulations, industry standards, and Honda standards, as applicable.
• Maintenance Coordination -- Prepare and execute preventative maintenance programs to ensure operational health and optimum uptime for assigned infrastructure, equipment, and building assets.
• Operations Support -- Utilize technical knowledge of electrical utility and infrastructure systems, project management, analytical decision-making, risk assessment, and troubleshooting/problem solving, to support facilities-related operations in order to meet or exceed organization metrics.

Qualifications, Experience & Skills

• Bachelor’s degree in Electrical Engineering, or related discipline, or equivalent combination of education and experience
• 1-8+ years of related work experience based on education
• Strong subject matter knowledge of industrial electrical utility and infrastructure systems (electricity supply and distribution, lighting, fire detection and alarm, etc.), through design, construction, maintenance, troubleshooting, and repair activities. Knowledge of building/campus facilities management and operations, including construction skilled trades.
• Professional Engineering (PE) license. Project management experience. Knowledge of building codes, governing regulations, and industry standards, such as NFPA, NEC, OSHA, EPA, and local building and utility-related codes. Knowledge of alternative energy sources, including solar and wind systems. Knowledge of industrial process equipment, including PLC, variable speed drive, and robotic systems. Experience with Maximo asset management system software. Electrical system modelling using SKM or similar program.
• Effective oral and written communication and presentation skills; customer focus (building productive relationships); Microsoft Office (Word, Excel, PowerPoint), Microsoft Project, and AutoCad/Revit capabilities.
• Demonstrated Abilities:  Effective communication of ideas to gain consensus from individuals or teams. Technical proficiency with expertise on some of the topics within area of expertise. Balancing multiple projects simultaneously. Comprehending technical drawings and specifications. Planning and executing special projects and reporting. Working well in a collaborative environment.
• Ability to balance the wants/needs of the customer with Facilities operational requirements. Knowledge of Honda project flow, budgeting, and cost reporting. Project tracking and reporting for PDCA development.

What differentiates Honda and make us an employer of choice?

Total Rewards:

• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
• Paid Overtime
• Regional Bonus (when applicable)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) 
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability 
• 401K Plan with company match + additional contribution
• Relocation assistance (if eligible)

Career Growth:

• Advancement Opportunities
• Career Mobility  
• Education Reimbursement for Continued Learning
• Training and Development programs 

Additional Offerings:

• Tuition Assistance & Student Loan Repayment
• Lifestyle Account
• Childcare Reimbursement Account
• Elder Care Support
• Wellbeing Program
• Community Service and Engagement Programs
• Product Programs

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

Job Purpose

Controls Engineer responsible for planning and implementation to upgrade existing and install new building controls utilizing self, team, and contractor abilities. Design Mechanical systems, develop schedules, budgets and forecasts, select materials, equipment, project staff and contractors.  Estimate costs, resources and time required to complete. Ensures controls architecture consistency between sites and analyzes technology trends. Includes focus on development and sustainability of the mechanical infrastructure (HVAC, Chillers, Air compressors, Utilities). Direct site building control related activities, through team members and contractors, to meet site needs (e.g. controls upgrade and replacements, programming optimization, standardization, and operations enhancements). Focus is to maximize cost efficiency and usability while minimizing risk to production and maintenance downtime. Job requires constant interaction with department's engineering and maintenance teams along with external customers and contractors.

This position will be joining the Facilities department in Honda Development & Manufacturing of America, LLC’s (HDMA). The Facilities department is responsible for the building which includes new construction, remodels, utility management (electric, compressed air, natural gas, water), building maintenance, end-of-life equipment replacements and upgrades. The goal of the department is to create a facility that we are proud of and to serve our customers.

Key Accountabilities

• Manage BMS/BAS(Building Management System/Building Automation Systems) specification, design, and operation. Develop and implement multiyear strategy to complete BMS migration. Collaborate with HDMA Facilities controls leaders to standardize a unified approach. Manage and oversee programming and work with IT networking team.
• Support operation of Facilities mechanical and electrical systems including but not limited to centrifugal fans, burners, cooling/heating coils, pumps, centrifugal air compressors, centrifugal chillers, heat exchangers, utilities, metering, communications. Manage and maintain documentation for the site Mechanical Systems.  Communicate critical updates to site system operators.
• Implement new engineering strategies and technologies to replace facilities equipment and systems at their end of life (EOL)
• Lead meetings and negotiate with customers and contractors of all levels and capabilities. Build mutually beneficial relationships with customers and contractors.

Qualifications, Experience, and Skills

Minimum Educational Qualifications

Bachelor of Science degree in Engineering (in Mechanical, Controls or Electrical) or equivalent related controls experience

Minimum Experience

2+ years of relevant working experience in a Controls/Project Management/Facilities Capacity preferred

2+ years working experience with control systems architecture and programming preferred

Other Job-Specific Skills

Use knowledge and experience to continually improve efficiency and effectiveness of tasks within area of expertise

Actively support / participate in project team activities related to significant business innovation; develop and execute activities/tasks to achieve the objectives of the business team

Demonstrate solid base of technical knowledge in day-to-day operations

Working Conditions

Willingness to travel for department reviews and business planning events at other HDMA facilities 

50% Manufacturing/Production Environment including construction site locations, 50% office/desk environment § Potential for assignments supporting other HDMA Facilities, Honda Affiliates, or North American Suppliers 

Work all appropriate overtime/weekends/shutdowns to manage projects and cover production needs. 

What differentiates Honda and make us an employer of choice?

Total Rewards:

• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
• Paid Overtime
• Regional Bonus (when applicable)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) 
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability 
• 401K Plan with company match + additional contribution
• Relocation assistance (if eligible)

Career Growth:

• Advancement Opportunities
• Career Mobility  
• Education Reimbursement for Continued Learning
• Training and Development programs 

Additional Offerings:

• Tuition Assistance & Student Loan Repayment
• Lifestyle Account
• Childcare Reimbursement Account
• Elder Care Support
• Wellbeing Program
• Community Service and Engagement Programs
• Product Programs

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

Job Purpose
Minimizing supplier quality issues using root cause analysis, implementing temporary solutions and permanent countermeasures to ensure minimal line impact and optimal product quality.  Using a regional viewpoint, work with assigned suppliers toward continuous improvement of manufacturing characteristics. Support collaborative problem resolution between HDMA and suppliers

Key Responsibilities

• Approve part/process changes for design changes and non-design changes.
• Approve/confirm Supplier root cause analysis, development of countermeasures and implementation.
• Perform data analysis, prioritize top impact issues and drive supplier characteristic improvement activities.
• Oversee and manage problem-solving analysis and investigations.
• Coordinate supplier countermeasure activities to provide an effective solution.
• Communicate with suppliers and other departments in regard to countermeasures.
• Build technical, Honda Way, and Department knowledge

Qualifications, Skills, & Experience

• Bachelor’s Degree in Engineering (e.g., Mechanical, Technical Design), 2-year tech degree with equivalent related experience or 6 years of relevant experience if no degree.
• 0-6 years of experience based on education, preferred at least 1 term as a co-op for Honda or in a similar manufacturing environment.
• Quality assurance, blueprint reading, part measurement, Catia/3D, MS office proficient, negotiation and communication skills

Decisions Expected

• Part review to confirm dimensional accuracy to the drawling or spec.  
• Production impact (possible line stoppage) based on the impact of any given part issue.
• One-way best-way, how to ensure proper quality confirmation, countermeasure and change point control.   

Working Conditions

• Open Office Environment.
• Walking and sorting parts.
• Limited travel.
• Overtime possible (Approximately 4 hours of overtime per week)

Please Note:  Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered

What differentiates Honda and make us an employer of choice?

Total Rewards:

• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
• Paid Overtime
• Regional Bonus (when applicable)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) 
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability 
• 401K Plan with company match + additional contribution
• Relocation assistance (if eligible)

Career Growth:

• Advancement Opportunities
• Career Mobility  
• Education Reimbursement for Continued Learning
• Training and Development programs 

Additional Offerings:

• Tuition Assistance & Student Loan Repayment
• Lifestyle Account
• Childcare Reimbursement Account
• Elder Care Support
• Wellbeing Program
• Community Service and Engagement Programs
• Product Programs
• Free Drinks Onsite

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

Starting Pay - $36.04 - $41.19 

Workstyle - Onsite

*Relocation assistance for candidates relocating over 50 miles*

About this Position:

An Equipment Service Technician at Honda Development and Manufacturing of America maintains, repairs, and implements improvements to various types of manufacturing equipment which allows the manufacturing areas achieve their safety, quality, and production targets.

Responsibilities include:

• Respond to equipment emergency downtime, troubleshoot for the root cause of the failure, and repair as needed in a timely manner
• Perform preventive maintenance activity both during production and non-production time
• Document daily activity in the Computerized Maintenance Management System (Maximo)
• Support weekend maintenance activity
• Complete assigned work orders when not responding to emergency downtime
• Support scheduled maintenance activity during plant shutdowns
• Attend all required training as well as self-develop skills
• Support any equipment installations, removal, and demo as required

Who we are seeking:

Required Work Experience:

• A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.
• Or a minimum of two years of relevant experience, if no degree.

Required Education:

• High School Diploma or equivalent.

Desired skills:

• Multi-craft technical skills:  Electrical, mechanical, automation, programmable logic controller logic, robotics, computer numerical control, hydraulics, pneumatics, and general maintenance
   
• Ability to read and understand various technical drawings & blueprints
• Effective time management skills
• Ability to communicate with Production, Engineering, and other Equipment Service associates.
• General computer skills

Other Job Specific Skills:

• Manufacturing environment:  coolant, grease, oil, noise
• 5-8 hours weekly overtime average – mainly on weekends
• Willing to work weekends, holidays and plant shutdowns as required
• Willing to work any shift (First, Second, or Third)
• Minimal potential travel for training and/or equipment reviews

What differentiates Honda and make us an employer of choice?

Total Rewards:

• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
• Paid Overtime
• Regional Bonus (when applicable)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) 
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability 
• 401K Plan with company match + additional contribution
• Relocation assistance (if eligible)

Career Growth:

• Advancement Opportunities
• Career Mobility  
• Education Reimbursement for Continued Learning
• Training and Development programs 

Additional Offerings:

• Tuition Assistance & Student Loan Repayment
• Lifestyle Account
• Childcare Reimbursement Account
• Elder Care Support
• Wellbeing Program
• Community Service and Engagement Programs
• Product Program

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a Honda

Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. 

 At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

Effectively lead multi-disciplinary facility electrical engineering projects with capabilities to implement and communicate an operational plan for completing a project, monitor progress and performance against the project plan; resolve operational problems, minimize delays, develop, and gather necessary resources to complete the project. Project scope includes current situation assessment, design, coordination, electrical capacity, coordinate process demand with current infrastructure capacity.  Productively manage workload to successfully complete end of life, new investment, and customer driven projects.  Systemize, standardize, and simplify the electrical projects.

•Electrical Engineering– Specify and evaluate the equipment and installation for all electrical equipment.  Evaluate drawings, teach, and train other discipline engineers on electrical specialty.  Assess electrical capacity versus current demand.  Evaluate end of life and innovate new characteristic changes on all electrical infrastructure.    
•Support operation of Facilities electrical systems including but not limited to generators, electrical panels, busways, transformers, breakers, and lighting and controls.  Manage and maintain documentation for the site Electrical Systems.  Communicate critical updates to site system operators   
•Utility Outages – Coordinate all power outages with internal departments, contractors, and outside entities as required.  Issue electrical schedules to affected customer and receive approval to proceed.  Schedule contract work and equipment service support to complete each power outage.   
•Support development of maintenance & investment budgets for the department electrical equipment and projects.    
•Simplex (life safety) Expert – Coordinate all life safety work with life safety expert, Simplex.  Provide feedback to Simplex on performance and required areas for improvement.  Evaluate project progress and identify areas for improvement.  Coordinate life safety work with electrical contractor, equipment service, customer department, County inspector to ensure work is complete without impacting SQCEDM categories.    
•Project Management - Work with internal customers and external consultants, contractors, and suppliers to develop initial concept, specifications, design drawing review, procurement scope, fabrication / construction, and installation-related documents.      
 

Minimum Educational Qualifications    
Bachelor of Science degree in Electrical Engineering

Minimum Experience    
1 to 3 years of experience developing, coordinating, and managing Electrical, Mechanical and/or facility related projects preferred

Other Job-Specific Skills    
Use knowledge and experience to continually improve efficiency and effectiveness of tasks within area of expertise
Actively support / participate in project team activities related to significant business innovation; develop and execute activities / tasks to achieve objectives of business team
Demonstrate solid base of technical knowledge in day-to-day operations
Strong data analysis, and problem-solving skills
Strong communication skills, both oral and written
Proficient with Microsoft Office (Work, Excel, PowerPoint)
Ability to use AutoCAD
Ability to read Electrical and mechanical drawings

Financial Dimensions    
Responsible for investment and expense spending for Facilities R&M to $1M+ multidisciplinary project scopes, Complete EOL analysis and Budget forecasting as needed

Set direction for equipment projects (method, layout, support requirements, etc)
Determine department strategy and plans to strengthen business characteristics
Determine appropriate methods to renew and install equipment to mitigate risk to current & future operations

Ability to work overtime as needed to complete tasks
Office, Shop, and Plant environment
Work all appropriate weekends / shutdowns to manage projects and cover production needs.
Complete work tasks under limited supervision

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a Honda

Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. 

 At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

The primary mission of this position is to lead activities related to equipment characteristic improvement for the Ohio Transmission Plant, Aluminium Machining Department.  This will be accomplished by performing true root cause analysis of top problems and implementing countermeasures.

This is an electrical-focused engineer whose goal is to facilitate department S, Q, and D metric target achievement.

Manufacturing Equipment Expert:

Equipment top problem root cause analysis and permanent countermeasure

Collect, analyze, and summarize information and trends related to equipment performanc

Identify improvement opportunities for Key Performance Indicators and for cost avoidance/elimination

Become an expert in a specific area of automation technology (i.e. PLC, Motion Control, Robotics, etc…)  Then, train associates on equipment or process change

Lifecycle management of manufacturing equipment. (Spare Parts, Procedures, PM

Project Management:  Define and create scope of design and construction for renovation, upgrade of existing electrical systems, or for build of a new system with a focus on cost control.  Conduct PDCA during design and implementation stage.  Create, implement and maintain project schedules and achieve desired results.

Review, verify and approve electrical engineering drawings at the various design completion levels. Work with and manage contractors' activities throughout the different phases of a project.

New Technology:  Use manufacturing expertise to support company’s development of new processes.

Minimum Educational Qualifications -Bachelor’s Degree in Mechanical, Electrical Engineering or equivalent related experience

If BSEE, then 0yrs.  If Experience only, then 6 years in related field

Other Job Specific Skills- Ability to interact in a team environment, PLC Programming, Robotics, Vision Systems, electrical controls, safety systems, servo motor, VFD control, AutoCAD electrical design, MS Office

• Work at the spot, in the factory
• 50% Office environment, 50% Production Floor environment
• About 2 weeks of travel domestic and international and 300-500 hours of OT annually

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

Job Purpose

Responsible for leading die/mold designs for North American mass production facilities with outputs in the form of 3D models and detailed drawings while working closely with customers and internal team members to ensure high quality parts and production stability.

Key Accountabilities 

• Design Die & Mold tooling utilizing CAD software.
• Implement customer specifications and request into new and existing dies/molds.
• Investigate improvements or countermeasure tooling related problems during die/mold builds and mass production.
• Follow design and manufacturing of suppliers of dies/molds and equipment.
• Support installation of dies/molds and other equipment at production facilities.

Qualifications, Experience, and Skills 

• Bachelor’s degree in Mechanical Engineering, Mechanical Engineering Technology or Manufacturing Engineering, Associate’s Degree in related field with 3 years of additional relevant experience, or 6 years of additional relevant experience with no degree.
• 0-2 years relevant experience, co-op experience preferred.
• Familiarity with CAD software.
• Mechanical/manufacturing knowledge.

Working Conditions 

• 70% office environment: sitting for extended periods and working on PC equipment.
• 20% manufacturing environment: PPE required at all times in manufacturing environment, standing for prolonged periods (up to 8hrs), occasionally lifting up to 40lbs, occasionally working inside casting machines, potential exposure to heat, occasional exposure to dust, oil or grease.
• Up to 10% travel required, including international (Japan, Canada, Mexico).

What differentiates Honda and make us an employer of choice?

Total Rewards:

• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
• Paid Overtime
• Regional Bonus (when applicable)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) 
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability 
• 401K Plan with company match + additional contribution
• Relocation assistance (if eligible)

Career Growth:

• Advancement Opportunities
• Career Mobility  
• Education Reimbursement for Continued Learning
• Training and Development programs 

Additional Offerings:

• Tuition Assistance & Student Loan Repayment
• Lifestyle Account
• Childcare Reimbursement Account
• Elder Care Support
• Wellbeing Program
• Community Service and Engagement Programs
• Product Programs

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.