Engineering Jobs in Hershey Pennsylvania Remote

ARM Group LLC is looking for a self-driven and energetic Staff Engineer who is looking to grow and embodies an ownership mentality. The Staff Engineer will collaborate with a team of multi-disciplined engineers and scientists, project managers, CAD designers, and other staff to service our client’s needs. This role will support a wide range of projects related to our Energy & Power practice area in the areas of erosion and sediment control design, stormwater management design, and land development engineering.

The successful candidate will assist in performing engineering calculations, writing reports, and creating/updating design drawings using CAD and assist with client and regulator communications. This role may also support our solid waste management, environmental services, geotechnical engineering, oil and gas, water resources, and construction administration practice areas.

Location: This position can be filled in our Hershey, PA office.

Requirements

• Prepare, review, and update design drawings and investigation reports for commercial/industrial and utility scale solar projects throughout the Mid-Atlantic region.
• Observe and monitor field work to analyze possible problems.
• Perform and/or check technical calculations related to erosion and sediment control design, stormwater management design, and related land development engineering.
• Research code, zoning, ordinances, and other requirements as needed to ensure project compliance.
• Prepare reports, letters, emails, permit applications, etc. for projects.
• Collaborate with other team members to meet deliverables on project and obtain further knowledge and experiences.
• Effectively communicate with key stake holders including project manager, project engineers, and other members of the project team.
• Pro-actively recognize conditions and problems of non-routine nature, develop solutions, and seek guidance when needed.

Base Requirements:

• Bachelor's degree or equivalent in engineering (Civil or Environmental) from an accredited four-year college or university.
• Experience with Autodesk Civil 3D or equivalent engineering software.
• A self-starter possessing strong communication, planning and organizational skills.
• Desire to work on multiple projects in parallel rather than a single large project for months.
• Proficiency in Microsoft Office Suite.
• Requires travel to job sites and occasionally out of the local area overnight stay.
• Valid drivers license

Preferred Requirements:

• E.I.T. certification preferred, but the opportunity to obtain certification can be developed.

Your Wellness, Our Priority: A Look at Our Benefits

We invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

The Harrisburg Division of the H&K Group, Inc. is currently seeking an experienced and motivated Heavy Equipment Operator to become a part of our team. This position entails the operation of heavy equipment in order to achieve daily production goals. H&K is deeply committed to preserving and protecting the health and safety of each and every one of its employees. As such, we are looking for someone who can work efficiently without compromising their responsibility to conduct the functions of their position in a safe and responsible manner. If you meet the job requirements outlined below, H&K would be happy to consider you for this position.

Why work for H&K Group, Inc.?

• Competitive salary commensurate with experience
• 100% Company-paid Health Benefits
• 401(k) Savings and Investment Plan
• Tuition reimbursement programs available to qualifying employees for approved programs
• Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more

Essential Duties and Responsibilities 

• Performs all work adhering to OSHA and H&K Safety policies
• Moves levers and depresses pedals to control operation, function, and movement of machine
• Feels lever and listens for stalling action of engine to operate equipment most efficiently
• Cleans equipment as scheduled
• Ensures equipment is safely and securely parked and stored
• Maintains equipment by greasing properly and checking fluids daily (oils, coolant, fuel level)
• Performs daily checks on equipment to ensure proper operating condition.
• Notifies shop foreman of any requirements for maintenance or repairs
• Performs other duties as assigned
• Other duties as assigned

Required Skills, Education, and Experience

• One-year certificate from an accredited college or technical school OR six months of related experience and/or training
  • Equivalent combinations of education and experience may be considered
• Able to pass practical skills test for heavy equipment including dozers, excavators, and loaders
• Strong verbal and written communication skills
• Ability to understand and carry out detailed but uninvolved written or oral instructions
• Problem solving
• Ability to fit test & utilize appropriate PPE as needed
• Ability to meet physical requirements (movement, lifting, as relevant to job)

Preferred Skills, Education, and Experience

• Two years of related experience and/or training
• Experience working in heavy civil construction, road construction, or quarries
• OSHA or other relevant safety certifications

Physical Demands

• Frequently required to:
  • Sit, stoop, kneel, crouch, or crawl
  • Use hands to finger, handle, feel
  • Reach with hands & arms
  • Talk or hear
• Occasionally required to:
  • Stand, walk, climb, and balance
  • Lift and/or move up to 50 pounds
• Specific vision requirements:
  • Distance
  • Peripheral
  • Depth perception
  • Ability to adjust focus

Work Environment

• Regularly exposed to:
  • Outside weather conditions
  • Vibration
• Frequently exposed to fumes or airborne particles
• Occasionally exposed to moving mechanical parts
• Noise level is usually loud

H&K Group, Inc.’s (H&K’s) Harrisburg Division (formerly Handwerk Site Contractors) has been a proud member of our heavy civil construction team since 1989. Based in Hummelstown, PA, and representing H&K’s westernmost base of operations, the Harrisburg Division offers complete heavy civil construction and contracting services to the central Pennsylvania region.

The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years.

Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K’s strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference.

H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans’ status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team.

Pre-employment drug testing (EOE)

Pre-employment Physical

100% Company-Paid Health Benefits!

PI37fc7f51109c-37344-32076771

The Materials Division of H&K Group, Inc. is looking for a Road Mechanic to repair and maintain diesel and gasoline heavy equipment and trucks in the field, based out of our Harrisburg Division in Hummelstown, PA. The ideal candidate is energetic, self-motivated, organized, competent, and professional.

Why work for H&K Group, Inc.?

• Competitive salary commensurate with experience
• 100% Company-paid Health Benefits
• 401(k) Savings and Investment Plan
• Tuition reimbursement programs available to qualifying employees for approved programs
• Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more
• Company vehicle

Essential Duties and Responsibilities 

• Perform all work adhering to OSHA, PA and DoT regulations, and H&K Safety policies
• Reviews job orders and observes and listens to equipment in operators/truck drivers/shop leaders to determine malfunction and to plan work procedures.
• Identify parts for repairs or replacement for all systems on equipment/trucks when needed.
• Examines protective guards, loose bolts and specified safety devices on equipment/trucks and makes adjustments.
• Dismantles equipment/trucks to examine parts for defect or to remove defective part.
• Replaces defective part with new part or repairs or reproduces part from various kinds of metal.
• Assembles and test operates machine or test drive trucks to verify correction of malfunction and to confirm that it meets manufactures specifications.
• Overhauls gas or diesel engines.
• Performs diagnostics through the use of computers and carious equipment.
• Performs front end inspection and alignments.
• Other duties as assigned

Required Skills, Education, and Experience

• High school diploma or equivalent (such as the GED) from an accredited educational institution OR relevant experience and/or training
• CDL B
• Clean driving record
• Customer Service and Teamwork
• General computer knowledge as well as caterpillar software (ET &SIS)
• Ability to use mechanics hand tools, torch, and welder
• Ability to fit test & utilize appropriate PPE as needed
• Ability to meet physical requirements (movement, lifting, as relevant to job)

Preferred Skills, Education, and Experience

• Related experience and/or training
• High school diploma or equivalent (such as the GED) from an accredited educational institution
• Technical school or college in the heavy equipment field
• Experience working in heavy civil construction, road construction, or quarries
• CDL A
• OSHA, MSHA, or other relevant safety certifications

Physical Demands

• Occasionally required to
  • Stand, walk, or sit
  • Climb, balance, stoop, kneel, crouch or crawl
  • Drive up to two hours
  • Use hands to finger or feel
  • Talk and hear
  • Lift and/or move up to 75 pounds

Work Environment

• Occasional exposure to
  • Moving parts
  • Fumes and airborne particles
• Noise level is loud at times
• At times required to work outdoors in all environments
• Hours regularly exceed 40 hours a week and 8 hours a day

The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years. 

Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K’s strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference.

H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans’ status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team.

Pre-employment drug testing (EOE)

Pre-employment Physical

100% Company-Paid Health Benefits!

PI95f74312fecd-37344-31978763

Harrisburg Division, a division of the H&K Group, Inc., is looking for 2nd shift diesel mechanics. This self-motivated, organized, competent, and professional individual repairs and maintains electric, diesel, and gasoline vocational trucks.

Why work for H&K Group, Inc.?

• Competitive salary commensurate with experience
• 100% Company-paid Health Benefits
• 401(k) Savings and Investment Plan
• Tuition reimbursement programs available to qualifying employees for approved programs
• Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more

Essential Duties and Responsibilities 

• Perform all work adhering to OSHA and H&K Safety policies
• Reads job order and observes and listens to truck or equipment in operation to determine malfunction and to plan work procedures.
• Installs new ignition systems, aligns front wheels, changes, or recharges batteries, and replaces transmissions and other parts.
• Replaces gas or diesel engines.
• Examines protective guards, loose bolts, and specified safety devices on trucks and equipment, and adjusts.
• Lubricates and services vehicles
• Fabricates special lifting or towing attachments, hydraulic systems, shields, or other devices according to schematic drawings.
• Collision repair, sand, prep, and paint
• Completes all standard maintenance on trucks and equipment and ensures state inspection requirements are met for cars, trucks, and trailers
• Other duties as assigned

Required Skills, Education, and Experience

• One-year certificate from an accredited college or technical school in diesel mechanics or a related field OR 2 years of related experience and/or training
  • Equivalent combinations of education and experience may be considered
• Class A or B CDL or ability to obtain within one year
• Clean driving record
• Customer Service and Teamwork
• Mathematical Skills
  • Compute rate, ratio, percent
  • Draw and interpret bar graphs
• Willing and able to work a 2nd- or 3rd-shift schedule
• Ability to fit test & utilize appropriate PPE as needed
• Ability to meet physical requirements (movement, lifting, as relevant to job)

 Preferred Skills, Education, and Experience

• 4 years of related experience and/or training
• State Inspection license
• Experience working in heavy civil construction, road construction, or quarries
• OSHA, MSHA, or other relevant safety certifications

Physical Demands

• Occasionally stand, walk, sit, talk, hear, climb, balance, and crawl
• Frequently stoop, crouch, kneel, and use hands to finger, feel, and grasp
• Occasionally lift and/or move up to 75 pounds 

Work Environment

• Noise level is loud at times
• At times required to work outdoors in all environments
• Hours regularly exceed 40 in a week and 8 in a day 

The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years.

Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K’s strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference.

H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans’ status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team.

Pre-employment drug testing (EOE)

Pre-employment Physical

100% Company-Paid Health Benefits!

PI22e44e828d57-37344-36539411

Lead complex construction projects from concept to completion, ensuring timelines, budgets, and quality standards are met. Collaborate with cross-functional teams and contractors to drive results and deliver exceptional builds. If you're a proactive leader with a passion for construction excellence, we want to hear from you.

Company Benefits:

• 13 paid holidays
• Vacation and sick pay
• PPE provided along with annual allowance for boots and prescription safety glasses
• Work shirts provided by company
• Annual appreciation package
• Early performance evaluation opportunities
• Competitive benefits (medical/dental/vision)
• 401k + match
• Company paid life insurance and disability
• Employee assistance program
• Career development opportunities

Responsibilities:

• Planning, organizing, directing, controlling, and evaluating construction projects (HVAC/Refrigeration & Mechanical projects) from start to finish according to schedule, specifications, and budget.
• Preparing and submitting construction project budget estimates, critical path schedules, and quality control programs.
• Planning and preparing construction schedules and milestones, and monitoring progress against established schedules.
• Preparing contracts and negotiating revisions, changes, and additions to contractual agreements with architects, consultants, clients, suppliers, and subcontractors.
• Planning, coordinating, and managing effectively all Foremen, material, and equipment to meet the established budget, schedule, and scope of the projects.
• Preparing progress reports and issuing reports to clients as necessary.

Qualifications:

• Must be able to develop and maintain detailed MS Project schedules (startup-task durations, resource allocations, labor costs, etc.).
• Must be able to maintain multiple complex projects in all varying phases of construction at the same time.
• 2-5 years in industrial piping or Ammonia Refrigeration as a Project Manager.
• Successfully completed multiple large-scale industrial Piping and Ammonia Refrigeration projects for reputable contractors.
• Coaching, mentoring, and teaching project teams.
• Advanced financial management and forecasting experience.
• Excellent oral and written communication skills; must be detail-oriented, self-sufficient, and self-motivated.
• Exceptional planning and organizing skills with the ability to manage a number of projects

Company Profile:

CIMCO specializes in the engineering, design, manufacture, installation and service of complex thermal building solutions for industrial, process cooling and recreational refrigeration and mechanical systems. For more than 100 years, CIMCO's leadership and unparalleled research, development and manufacturing programs has put us at the forefront of industry advancements and technological breakthroughs. Our professional engineers, technicians and designers apply innovative state-of-the-art equipment and refrigerants to develop systems that meet even the most complex thermal challenges.

CIMCO is committed to creating an inclusive environment where people from all backgrounds can thrive. Together, we embrace diversity of thought, experience, and perspective, as we combine our unique skills and capabilities to drive successful outcomes for all stakeholders. As an equal opportunity employer, CIMCO provides accessibility accommodations during the recruitment process. Should you require any accommodation, please let us know and we will work with you to meet your needs.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications.  This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.  

The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines. 

 
This position is an onsite role, located in Tucson, AZ.

What You Will Do: 

• Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements. 

• Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions. 

• Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts. 

• Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies. 

• Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.

Qualifications You Must Have:  

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:

• Experience with proactive and reactive component obsolescence management methodologies. 

• Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues. 

• Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process. 

• Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs. 

• Experience with BOM (Bill of Material) development and management for developmental and production programs. 

• Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions. 

Qualifications We Prefer:  

• Master’s Degree in Electrical Engineering or other related science or engineering discipline 

• Ability to navigate multiple complex processes and tools. 

• Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field. 

• Ability to read and interpret engineering drawings and hierarchy definition. 

• Knowledge of component failure modes by commodity 

• Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs 

• Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications 

• Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces 

• Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.  

• Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations. 

• Outstanding organizational, presentation and technical skills. 

• Ability to multi-task and appropriately prioritize responsibilities. 

• Willingness to support occasional travel.  

What We Offer  

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. 

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!  

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications.  This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.  

The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines. 

 
This position is an onsite role, located in Tucson, AZ.

What You Will Do: 

• Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements. 

• Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions. 

• Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts. 

• Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies. 

• Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.

Qualifications You Must Have:  

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:

• Experience with proactive and reactive component obsolescence management methodologies. 

• Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues. 

• Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process. 

• Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs. 

• Experience with BOM (Bill of Material) development and management for developmental and production programs. 

• Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions. 

Qualifications We Prefer:  

• Master’s Degree in Electrical Engineering or other related science or engineering discipline 

• Ability to navigate multiple complex processes and tools. 

• Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field. 

• Ability to read and interpret engineering drawings and hierarchy definition. 

• Knowledge of component failure modes by commodity 

• Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs 

• Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications 

• Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces 

• Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.  

• Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations. 

• Outstanding organizational, presentation and technical skills. 

• Ability to multi-task and appropriately prioritize responsibilities. 

• Willingness to support occasional travel.  

What We Offer  

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. 

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!  

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms