Engineering Jobs in Groveport Franklin County, OH

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Maintenance Supervisor - 3rd Shift - Bexley, OH - $70k - $80k + 10% bonus

We are partnering with a well-established manufacturing facility in the food/CPG space that is seeking a hands-on Maintenance Supervisor to lead and support a 3rd shift maintenance team. This role is ideal for a technically strong leader who enjoys being on the floor, driving reliability, and building a safety-first culture.

You’ll be responsible for ensuring plant equipment runs reliably, supporting production goals, and leading continuous improvement efforts—all while maintaining strict compliance with food safety and regulatory standards.

Key Responsibilities

• Lead and promote a strong safety culture, ensuring compliance with OSHA, NFPA, and company safety standards
• Supervise and support maintenance technicians across preventive, corrective, and emergency maintenance activities
• Prioritize work orders to support production uptime and equipment reliability
• Utilize a CMMS system (MaintainX) to schedule PMs, track downtime, and close work orders
• Manage shift coverage, time & attendance, and technician workflow
• Track machine downtime and coordinate corrective actions
• Maintain spare parts inventory and ensure accurate transactions
• Support operations leadership in achieving safety, performance, and cost objectives
• Partner with Continuous Improvement and Engineering on capital projects and process improvements
• Oversee facility maintenance including HVAC and electrical distribution systems
• Interface with vendors and contractors to ensure work is completed safely and effectively

Food Safety & Quality

• Lead maintenance staff in compliance with GMPs, HACCP, sanitation, and food safety standards
• Support adherence to FDA, SQF, and other applicable regulatory requirements

Health & Safety

• Ensure safe work practices and safe working conditions at all times
• Promote high standards of health, hygiene, and workplace security

Qualifications

• High School Diploma or equivalent (required)
• 3+ years of maintenance supervisory experience in a Food Manufacturing environment
• Food processing or CPG experience strongly preferred
• Technical degree or maintenance-related certifications are a plus
• Strong working knowledge of OSHA and NFPA regulations
• Demonstrated understanding of food safety practices in manufacturing
• Ability to lift up to 50 lbs and perform physical job requirements
• Comfortable operating forklifts and scissor lifts
• Bilingual (English/Spanish) is a plus

CAS uses intuitive technology, unparalleled scientific content and unmatched human expertise to help companies create groundbreaking innovations that benefit the world. As the scientific information solutions division of the American Chemical Society, CAS manages the largest curated reservoir of scientific knowledge, and for 115 years, has helped innovators mine, assess and apply that information to keep businesses thriving. The CAS team is global, diverse, endlessly curious and strives to make scientific insights accessible to innovators worldwide.

CAS is currently seeking a Software Engineer. This position will be located in our headquarters in Columbus, Ohio.

Job Summary:

In this role, you will design, build, and deploy software applications, services, and systems that advance the scientific capabilities of CAS Custom Services, offering expert scientific knowledge management consulting and custom informatics solutions. As a member of an Agile team, you will work closely with product owners and teammates to refine backlogs, groom epics and user stories, and prepare for upcoming sprints. Success in this role requires a strong understanding of project processes, the ability to collaborate effectively, and a proactive approach to solving technical challenges.

Job Duties:

Software Development

• Design, develop, and enhance complex software applications, services, and systems across multiple Agile delivery teams, applying advanced engineering principles to deliver high‐quality CAS products and solutions.
• Exercise independent technical judgment to evaluate requirements, propose architectures, and implement scalable, maintainable code aligned with organizational standards and emerging best practices.

Backlog & Sprint Collaboration

• Partner strategically with product owners and cross‐functional teammates to refine and prioritize, ensuring clarity of scope, feasibility, and alignment with broader product roadmaps.
• Leverage domain expertise to influence backlog quality, identify dependencies, mitigate risks, and shape sprint deliverables that advance product and organizational objectives.

DevOps, Automation, and Engineering Excellence

• Champion modern engineering practices by advancing automated testing frameworks, continuous integration/continuous delivery (CI/CD), and robust change‐control methodologies.
• Identify and implement opportunities for process optimization, proactively improving reliability, efficiency, and speed of delivery across the development lifecycle.

Cross-Functional Engagement & Influence

• Build influential relationships with stakeholders across CAS to align technical execution with business needs, resolve cross‐team challenges, and accelerate shared outcomes.
• Serve as a trusted technical partner, contributing expertise, anticipating impacts, and ensuring solutions integrate effectively across functions.

Continuous Learning & Technology Foresight

• Stay ahead of emerging technologies and industry trends, proactively assessing their application to CAS solutions and influencing team adoption of modern tools, patterns, and practices.
• Engage in ongoing professional development through formal training and peer collaboration, contributing to a culture of knowledge sharing and technical excellence.

Qualifications:

• Bachelor's degree: Computer science or engineering, or equivalent experience.
• 8+ years of software development and application delivery experience
• Coursework or familiarity with chemistry preferred
• Strategic thinking and strong communication and interpersonal skills. Strong team player with team spirit. Able to communicate effectively across all levels of management in a highly matrixed and/or agile environment.
• Experience in leadership roles on application delivery teams
• Demonstrated passion for coding, learning, and improving craftsmanship
• Willingness to develop cross-functional skills to support the Agile team's needs
• Demonstrated self-motivation and initiative. Able to motivate team members to be creative and efficient .
• Ability to work independently and within a matrix organization.
• Ability to build relationships and influence others.

Technical Experience

• Java and Python development
• Spark and Scala
• Docker and Kubernetes
• Linux command line proficiency
• Experience with public cloud environments (AWS preferred)
• JavaScript/TypeScript web development and popular frameworks, i.e. React
• NoSQL databases (MarkLogic strongly preferred)
• Infrastructure as Code (Terraform and/or AWS CDK)
• CI/CD tools (Jenkins or GitLab)
• MCP or Agentic AI frameworks
• AI coding assistants (Claude Code, GitHub Copilot)
• Common development tools, i.e. VS Code, Intellij IDEA, etc.

CAS offers a competitive salary and comprehensive benefits package, including a generous vacation plan, medical, dental, vision insurance plans, and employee savings and retirement plans. Candidates for this position must be authorized to work in the United States and not require work authorization sponsorship by our company for this position now or in the future. EEO/Disabled/Veteran

Senior Associate, Business Transformation

Location: Greater Columbus, Ohio

About the Opportunity

We are partnering with a fast-growing, global organization to find a Senior Associate, Business Transformation for a highly visible team focused on improving key business processes across the company.

This team operates like an internal consulting group and partners across functions to solve problems, improve workflows, support systems-related initiatives, and help the business scale more effectively.

This is an excellent opportunity for someone with strong analytical ability, business curiosity, and a process improvement mindset who wants broad exposure, meaningful work, and long-term growth. The right person will be able to think through ambiguity, stay organized, communicate well, and contribute in a fast-moving environment.

Why This Opportunity Stands Out

• Opportunity to learn from an experienced, high-performing team
• Strong exposure to business operations, systems, and cross-functional initiatives
• Fast-growing company with meaningful career growth potential
• Visible role with direct involvement in important business projects
• Strong benefits package, including:
• Comprehensive medical, dental, vision, life insurance, and more
• 10 holidays
• 5 weeks of vacation
• 401(k) match
• Several additional incentives
• Compensation: $70k to $105k base salary (if interested but you need more to consider, just let me know and I will ask.

What You'll Do

• Support business process improvement projects across Order to Cash, Purchase to Pay, New Product Development, and Sales, Inventory, and Operations Planning
• Help plan, coordinate, and execute cross-functional initiatives
• Build and maintain project schedules, milestone trackers, meeting documentation, process maps, standard operating procedures, and role/responsibility documentation
• Assist with current-state assessments, future-state process design, root cause analysis, and implementation planning
• Gather information from stakeholders, organize findings, and help translate business needs into actionable next steps
• Support improvements tied to enterprise systems such as Oracle or SAP
• Prepare reports, dashboards, status updates, presentations, and analysis to support decision-making
• Help identify process gaps, workflow inefficiencies, and opportunities for simplification or automation
• Participate in working sessions and help keep projects moving forward across multiple stakeholders
• Contribute to training, documentation, and change adoption efforts as needed

What We're Looking For

• 2 to 4+ years of relevant experience in business analysis, consulting, project coordination, operations, finance transformation, process improvement, supply chain, or related work
• Strong analytical and problem-solving skills
• Ability to operate effectively with limited structure and shifting priorities
• Strong communication skills and comfort working with a range of stakeholders
• Organized, proactive, and able to manage multiple priorities at once
• Curiosity, initiative, and a desire to learn quickly
• Strong attention to detail and follow-through
• Bachelor's degree preferred in business, finance, accounting, engineering, supply chain, information systems, economics, computer science, or a related field

Preferred Qualifications

• Exposure to business process improvement, transformation, operational excellence, or internal consulting work
• Experience with Oracle, SAP, or other enterprise platforms
• Familiarity with Excel, Power BI, or other reporting and project coordination tools
• Exposure to manufacturing, custom product environments, or complex business operations is helpful
• Interest in artificial intelligence tools and how they can improve workflows is a plus

Ideal Profile

This role is well suited for someone who is bright, adaptable, and eager to grow. You do not need every answer on day one, but you should know how to think through a problem, ask smart questions, and help create structure where little exists. You should be comfortable in a fast-paced environment and excited by the chance to take on visible, meaningful work.

Interested?

Please apply today for consideration as interviews are currently being conducted.

This position is not eligible for sponsorship. US Citizenship or Green Card is required.

Our client is launching a new service division focused on the testing and certification of laboratory fume hoods, biosafety cabinets, and cleanroom systems — and we're looking for our first key hire to help build it.

This is not a typical technician role. It's a rare chance to be part of something from the ground up — leading field work, managing client projects, and shaping how our operations grow. You'll work directly with company leadership and have a hand in everything from scheduling and customer communication to certification testing and mentoring future technicians.

If you're someone who takes initiative, enjoys technical work, and wants to grow into a leadership position with a fast-paced, entrepreneurial company, we want to talk to you.

What You'll Do

Perform field testing, certification, and repair of fume hoods, biosafety cabinets, and other HEPA-filtered systems

Manage job scheduling, customer communication, and documentation

Ensure all work meets NSF, ASHRAE, and safety standards

Maintain and calibrate instruments and tools

Train, coach, and lead future team members as the company grows

Identify service opportunities and support project estimating

Represent the company with professionalism and technical excellence

What We're Looking For

3+ years of experience in HVAC, cleanroom, or lab equipment service (TAB, BSC, or fume hood experience a plus)

Strong technical aptitude with airflow testing and digital instruments

Great communicator who enjoys solving problems and helping clients

Organized and comfortable managing multiple jobs at once

Willing to travel regionally (up to 50–60%)

Valid driver's license and clean driving record

Able to lift up to 75 lbs and work safely in mechanical spaces

Preferred

Familiarity with NSF 49, ASHRAE 110, NEBB, or AABC standards

OSHA 10 or 30-hour certification

Experience in startup environments or small business operations

Bachelor's or associate degree in a technical or engineering field

Be part of a company that's growing fast in the life-science and lab safety space

Direct mentorship from leadership and clear growth path to management

Competitive pay with travel per diem and equipment provided

Work that directly supports research, healthcare, and safety in critical labs

ITTConnect is seeking an IT Project Manager - Process Intelligence to work for one of our clients. This is a new position with a client that is a global leader in consulting, digital transformation, technology and engineering services present in nearly 50 countries. The end client is in the Utilities/Energy.

Job location: Columbus, OH. Job may be hybrid, 3-4 days a week onsite as needed.

The Project Manager will oversee and coordinate the delivery of the Process Intelligence work, managing the process from design to hyper care in partnership with Celonis (the tool that the client uses for PI) and other business partners. This role will ensure effective communication and collaboration across teams while maintaining project documentation and facilitating review meetings.

Responsibilities:

• Oversee and coordinate project delivery for the Process Intelligence work, ensuring alignment with project goals and timelines.
• Create & maintain comprehensive project documentation and process documents to ensure clarity and transparency throughout the project lifecycle in accordance with established project governance.
• Coordinate IT, Business Unit (BU), and Celonis review meetings, ensuring effective follow-ups on action items and progress.
• Track and coordinate progress of AEP tasks and activities.
• Facilitate AI reviews, document findings, and mediate any identified vulnerabilities.
• Report project status to the Delivery Manager and collaborate directly with the PM team to discuss risks, issues, and impediments.
• Maintain ongoing communication with stakeholders regarding project progress, challenges, and strategies for resolution.
• Promote continuous improvement activities within the project team to enhance quality and optimize value delivery.
• Manage & maintain a project plan using Jira or similar tools
• RAID management & developing mitigation strategies
• Establish regular cadence for meeting with the team to monitor progress

Requirements:

• Proven experience in project management, preferably in a technology-focused environment.
• Quick learner and gets familiar with program vision
• Prior experience in working with an implementation vendor
• Strong understanding of Waterfall, Scrum/Agile principles and Kanban methodologies
• Excellent organizational and strong communicator (written and verbal
• Experience with managing a cross functional team that includes both full-time and part-time team members
• Ability to work collaboratively with diverse teams and stakeholders
• Experience with project documentation and management tools, such as Jira, is a plus
• Familiarity with Celonis and AI-related processes would be advantageous
• Strong problem-solving skills and the ability to manage risks effectively.

A Construction Estimator is responsible for preparing accurate cost estimates for construction projects by analyzing plans, specifications, and other documentation. They play a key role in helping companies bid competitively and ensure projects remain within budget.

Key Responsibilities

• Analyze blueprints, drawings, and project specifications to determine scope of work
• Prepare detailed cost estimates, including materials, labor, equipment, and subcontractor costs
• Solicit and review bids from vendors and subcontractors
• Conduct quantity takeoffs and cost analysis
• Identify potential risks, cost-saving opportunities, and value engineering options
• Collaborate with project managers, engineers, and clients during pre-construction phases
• Maintain and update cost databases and historical data
• Prepare and present bid proposals and supporting documentation
• Monitor project costs and assist with budget tracking during construction