Engineering Jobs in Greensboro Ndc, NC

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

**** THIS IS AN ONSITE ROLE IN GREENSBORO NC. REMOTE CANDIDATES WILL NOT BE CONSIDERED ****

The IT Project Manager leads technology initiatives across Engineering, Quality, MES, Laboratory, and Specification Management domains. The role partners with business and IT stakeholders to understand needs, define requirements, propose optimal solutions, and drive change. Using a hybrid delivery approach, the Project Manager ensures disciplined execution of scope, schedule, cost, risks, and communication while maintaining compliance, validation, and quality standards.

JOB DUTIES:

• Lead end‑to‑end project planning and delivery using hybrid methodologies (agile + waterfall).
• Drive requirement gathering, solution definition, and alignment with compliance, quality, and enterprise architecture.
• Create and maintain project schedules, milestones, dependencies, and resource plans using tools such as MS Project and Jira.
• Manage project financials including budgets, forecasts, actuals, and variance tracking, ensuring timely approvals and documentation.
• Communicate effectively with stakeholders to review scope, provide updates, manage expectations, and facilitate decision‑making.
• Coordinate testing, deployment, cutover, and stabilization activities for assigned technologies.
• Identify, track, and mitigate project risks, issues, and changes.
• Support organizational readiness, training coordination, and adoption of new solutions.

REQUIRMENTS:

• 10+ years of IT project management experience delivering technology initiatives in manufacturing or regulated environments
• Bachelor’s degree in IT, Engineering, Business, or related field
• Experience with hybrid PM methodologies
• Proficiency with project management tools (e.g., MS Project, Jira)
• Experience managing project budgets and financial processes
• PMP, PMI‑ACP, or CSM certification (preferred)
• Experience with MES, LIMS, QMS, engineering design platforms, or specification systems (preferred)

To be considered, email resumes in the MS Word format with all-inclusive W2 hourly contract rate to work onsite in Greensboro, NC. Selected candidate must be willing to submit to a pre-employment, post-offer background check and drug test.

This is a Contract to Hire position based out of Greensboro, NC.

The pay range for this position is $56.89 - $71.30/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Greensboro,NC.

This position is anticipated to close on Mar 20, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

Position Overview

We are seeking an experienced and professional First Officer to join our Part 91 corporate flight department operating a Gulfstream G650 based in Greensboro, North Carolina.

This is a full-time position. Candidates must be willing to relocate if not currently residing in the Greensboro area.

This position supports executive leadership through domestic and international operations and plays an important role in maintaining the safety, reliability, and service standards of the department. As part of a dedicated two-pilot team, the selected candidate will contribute to flight operations, planning, aircraft readiness, and the overall passenger experience.

Department Environment

Our flight department operates a single Gulfstream G650 in support of executive travel. As a small, highly collaborative team, we value professionalism, accountability, discretion, and a commitment to operational excellence.

The First Officer will work closely with the Chief Pilot in all aspects of flight operations and will be positioned for future Captain upgrade consideration based on performance, leadership development, and operational needs.

Schedule & Quality of Life

This Part 91 operation emphasizes long-range planning and schedule predictability. In most cases, trips are scheduled with approximately 60 days of advance visibility.

While flexibility is essential in corporate aviation, short-notice trips are infrequent and typically occur only under rare or unexpected circumstances.

Minimum Qualifications

• FAA Airline Transport Pilot (ATP) Certificate – Airplane Multi-Engine Land
• Current FAA First Class Medical
• Valid U.S. Passport with no travel restrictions
• 4,000 hours total flight time
• 3,000 hours multi-engine time
• 2,000 hours jet/turbine time
• Recent jet experience within the preceding 12 months
• Recent corporate aviation experience operating jet aircraft
• Experience conducting both domestic and international operations

Preferred Qualifications

• G-V Type Rating (G650 experience strongly preferred)
• Experience in the Gulfstream GV-series (GV, G550, G500, G600, G650, or G650ER)
• Heavy corporate jet experience preferred, including Gulfstream large-cabin series, Bombardier Global series, or Dassault Falcon 7X / 8X
• International operational experience including oceanic procedures, CPDLC, and global flight planning
• Prior Part 91 corporate flight department experience
• Demonstrated leadership potential and commitment to long-term professional growth

Compensation & Benefits

• Competitive compensation commensurate with experience
• Relocation package available for candidates relocating more than 250 miles
• Company-paid initial and recurrent training
• Comprehensive medical benefits
• 401(k) retirement plan with company match
• Stable Part 91 schedule with advanced planning visibility

Requirements:

• 1-2 years of experience within construction and engineering
• Strong written and verbal communication skills Strong organization skills

Pluses:

• Hospital, healthcare, life sciences, higher education experience Field based experience

Job Description:

Insight Global is looking for a Project Engineer for one of our CM clients to support a new ground up commercial school building in Greensboro, NC. This role is a great stepping stone for anyone who is interested in becoming an Assistant PM or Assistant Superintendent as you will get exposure to field based work as well as office based. Duties of the Project Engineer include:

• Maintain knowledge of all general contract and subcontract documents as well as the job estimate, and to see that all drawings and specifications properly relate to the estimate.
• Work within established procedures with owner, architect and engineers for obtaining information, approvals, and processing of shop drawings. Examine all drawings for suspected design deficiencies, impractical details, code violations, etc. and bring them to the attention of the Project Manager. Distribute information required for construction.
• Help prepare and distribute drawings, shop drawings, process schedules, etc.
• Schedule, expedite, examine, coordinate and obtain approval for shop drawings, samples, material lists, etc.
• Ensure that materials and equipment are released for fabrication or manufactured in time to meet construction schedule.
• Receive and distribute information on changes in the work, prepare an independent estimate for all parts of the work. Obtain and check estimates for the changes from subcontractors.
• Help prepare requisitions for subcontracts. Obtain adequate information for purchasing and otherwise assist the Project Manager and entire team by clearing questions for bidders, reviewing the bid analyses, and obtaining approvals of awards.
• To work with the Superintendent in obtaining the necessary permits required for the building construction. Verify that subcontractors obtain their required permits. Assist in processing regular reports required for the project, the Owner, and associated Agencies.
• Assist in record keeping, reporting, submissions and filing of required documents and Barr and Barr corporate procedures and protocols.
• Tracking of information and documents and follow up with contractors and vendors. • Assemble and prepare final records for the project.

The MRB Design Engineer - Structures & Systems reviews defects, establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if corrective action is required.

1. Reviews discrepancy documents to fully understand non-conforming aircraft structure or systems affecting production or flight test aircraft. A priority will be given to engineers who possess skill sets in both structures and various systems.

2. Develops repair dispositions. Ensures that the proposed repair is structurally and functionally equivalent to the blueprint design and that it will not affect systems functionality.

3. Provides on site technical support, including interpretation of Engineering drawings, specifications, test procedures, and other systems related documents.

4. Assists in determining if discrepancies are Engineering related or workmanship issues and documents findings.

5. Initiates design and process changes to correct design errors, resolve complex, chronic manufacturing problems to improve produce-ability and cost of the aircraft.

1. Bachelors of Science degree in Mechanical or Aerospace Engineering; experience can be used in lieu of degree requirements.

2. 5+ years experience of MRB type design and/or repair of aircraft structures & systems. 

3. Working knowledge of Aircraft structure and aircraft systems, materials, fasteners, production methods, corrosion prevention, production hand tools, non-destructive testing, and Standard Repair Methods (SRM).

4. Working knowledge of Mechanical Systems concepts and troubleshooting methods.

5. Working knowledge of CATIA V5, 2D engineering dwgs, parts lists, and aircraft effectivity.

6. Working knowledge of SAP preferred.

7. Proficiency in Microsoft Office Suites (Word, Excel, PowerPoint) and Lotus Notes.

8. Ability to write clear, concise, and easily understandable step-by-step rework, repair, and system troubleshooting instructions.

9. Ability to create rework/repair drawings using either, CATIA, PowerPoint, Word, or hand drawn sketches.

10. Ability to effectively communicate with all MRB team members and with all levels throughout any HACI organization.

11. Ability to work independently or within a team oriented environment.

12. Willingness to travel to the shop floor or adjacent buildings to investigate problems on the aircraft or in production areas. Ability to communicate well with shop floor personnel.

1. Incumbents may be routinely exposed to equipment operational noise, heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.

2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.

3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA,

OSHA, DOT, EPA, State, and Federal regulations, etc.).

4. Read, hear, speak, and see with no restrictions, as required by job duties.

5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.

6. Effectively communicate in Business English language.

7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.

8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology ”or“ movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

9. Incumbents must be willing to follow company HR policies.

The Cost Analyst plays a key role in executing cost management strategies across the supply chain. The Cost Analyst supports cost roll-ups and detailed cost walks, proactively manages cost risks, and prepares both periodic and ad-hoc cost reports. The ideal candidate is detail-oriented with an ability to help management make informed decisions, ensuring that financial targets are met, and strategic decisions are supported.

1. Prepare detailed monthly cost reports, providing in-depth analysis of cost changes, and identifying cost variances early. Implement proactive mitigation strategies to address discrepancies, ensuring financial objectives are met.
2. Develop and maintain cost forecast models to track and anticipate future expenses.
3. Communicate cost analysis findings and recommendations to management and stakeholders.
4. Stay up to date on industry trends and market conditions to inform procurement decisions.
5. Prepare should cost for a variety of aircraft costs
6. Lead cross-functional teams to drive cost reduction initiatives.
7. Identify and lead cost reduction initiatives.
8. Maintain accurate and organized records of cost data and contracts.
9. Continuously evaluate and improve processes and procedures to increase efficiency and effectiveness.
10. Collaborate with other departments, such as finance and operations, to ensure alignment of procurement goals and strategies.
11. Provide support and guidance to other team members on cost analysis and procurement strategies.
12. Discovers organizational gaps that increase costs and hinder greater productivity. Analyzes the company’s processes and suggests improvements.
13. Stays informed about industry trends, technological advancements, and best practices to maintain the company’s competitive edge as it relates to continuous improvement and cost.
14. Ensures compliance with procurement guidelines, company policies, and strategic company objectives.

1. Bachelor's degree from a four-year accredited university with a focus in Supply Chain Management, Industrial Engineering, or Business Administration preferred.
2. Minimum of 5 years’ experience in project management, cost management, or related roles.
3. Ability to read and interpret technical drawings.
4. Previous experience in a directly related procurement, purchasing, supply chain, or project management role within aviation/aerospace manufacturing industry is preferred, but not required.
5. Excellent writing ability with prior experience in presenting information to diverse audiences.
6. Working knowledge of Microsoft Office products. Proficiency in SAP preferred.
7. Self-motivated nature with an ability to work independently with minimum supervision and simultaneously manage multiple projects.
8. Strong interpersonal skills for building relationships with suppliers and all levels of company personnel.
9. Strong organizational skills with an ability to clearly and concisely present data

1. Incumbents may be routinely exposed to equipment operational noise, heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Ability to work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State and Federal regulations, etc.).
4. Ability to read, hear, speak, and see with no restrictions, as required by job duties.
5. Ability to comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Ability to effectively communicate in Business English language.
7. Ability to pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.

Job Title: Maintenance Engineering Technician

Job Location: Liberty, NC

Job Type: Contract

Job Description:

• The role involves testing, troubleshooting, and repairing electrical equipment and systems, including circuits, relay logic, wiring, motors, servo drives, and various electronic components.
• The individual will support machine integration into production, ensure equipment safety, perform technical documentation, and participate in continuous improvement efforts.
• The position requires strong problem-solving skills and the ability to support engineering projects and production trials.

Requirement/Must Have:

• Industrial maintenance experience in a manufacturing environment or experience with equipment installation and debugging.
• Experience with electrical and mechanical systems in an industrial setting.
• Technical experience with PLC programming, including reading, writing, and modifying logic.
• Technical experience with servo motion controllers.
• Technical experience with relay logic, wiring, and troubleshooting.
• Technical experience with robotics, including programming and troubleshooting.
• Experience with hydraulic or pneumatic troubleshooting and schematic reading.
• Availability to work overtime, holidays, weekends, and during shutdowns.
• Ability to travel domestically and internationally up to 30%.

Experience:

• Experience in equipment testing, repair, and integration.
• Experience supporting machine production trials.
• Experience developing and maintaining schedules for assigned work areas or projects.

Responsibilities:

• Test and repair electrical equipment and systems.
• Write, program, troubleshoot, modify, and repair PLCs, robotics, cameras, and other electronic systems.
• Troubleshoot and repair safety systems, hydraulic systems, pneumatic systems, and machine components.
• Plan and execute machine integration into mass production.
• Perform administrative documentation of work performed.
• Problem-solve and continuously improve safety, quality, and productivity.
• Develop detailed schedules for work areas or projects.
• Participate in engineering project planning.
• Support machine production trials at vendor sites.
• Certify equipment safety per applicable standards through safety integrity checks.

Should Have:

• Ability to learn new processes quickly.
• Strong collaboration and communication skills.

Skills:

• Strong technical and troubleshooting skills across electrical, mechanical, and electronic systems.
• Ability to read and interpret schematics.
• Strong organizational and documentation skills.

Qualification And Education:

• Technical associate degree or higher preferred, or equivalent experience.
• Experience with production processes, including standardized work and job instruction sheets.
• Experience analyzing quality data from multiple sources.
• Experience with new plant or facility startup preferred.
• Experience in high-volume production environments is a plus.

Now Hiring: Electrical Assistant Project Manager

Department: Project Management

Reports To: Project Manager

Locations: Greensboro/Raleigh/Charlotte

We are seeking a detail-oriented and driven Electrical Assistant Project Manager to support our Project Management team. This role plays a critical part in coordinating field activities, maintaining project documentation, assisting with estimating, and ensuring projects are delivered on time, within budget, and to the highest quality standards.

The Assistant Project Manager works closely with Project Managers, Superintendents, field teams, and clients to help manage project planning, scheduling, purchasing, change orders, and documentation. This position requires strong organizational skills, attention to detail, and the ability to manage multiple priorities in a fast-paced construction environment.

Key Responsibilities

• Assist with planning, organizing, and scheduling project activities
• Support budgeting, purchasing control, profit projections, and change order processing
• Maintain accurate project documentation and file management
• Coordinate material requirements to ensure timely delivery to job sites
• Assist with project estimates and proposal preparation
• Participate in job planning meetings, progress meetings, and site visits
• Support development of project pre-qualification materials
• Provide administrative and office support as needed
• Communicate project updates, issues, or changes to the Project Manager in a timely manner
• Travel to job sites or other company locations as required

Qualifications

• Proficiency in Microsoft Office (Excel, Word, Outlook, PowerPoint)
• Ability to learn and effectively use project management software
• Strong organizational, communication, and problem-solving skills
• Ability to manage multiple deadlines and adapt to changing priorities
• Experience maintaining confidential and detailed records
• Team-oriented with professional communication skills

Education & Experience Preferred

• Bachelor’s or Associate degree in Construction Management, Engineering, Business Administration, or related field
• Four-year electrical apprenticeship graduate
• OR five (5) years of field-related experience in commercial/industrial electrical construction
• Extensive administrative experience, preferably in construction or service industry

If you are looking to grow your career in a collaborative and team-driven environment, we encourage you to apply.

#NowHiring #AssistantProjectManager #ConstructionJobs #ElectricalConstruction #ProjectManagement #CommercialConstruction #Hiring

About the Company

Orr Partners LLC is currently responding to a Request for Proposal (RFP) for the development of a large aircraft manufacturing facility in Greensboro, NC. We are identifying and selecting top-tier Project Management talent to include as "Key Person" in our official response. This is a unique opportunity to join a high-profile pursuit. If selected, your credentials will be presented directly to the client to demonstrate our team’s capability to deliver this complex industrial initiative. Orr Partners has a proven track record of delivering award-winning projects, and we are seeking a team that can uphold this standard of excellence.

About the Role

In this position, you will serve as a lead overseeing the project's full lifecycle. The scope of work is comprehensive, covering design, permitting, and construction, and will require the planning and integration of tooling and equipment specific to aircraft manufacturing. You will act as the primary link between the client, the design team, and the general contractor, ensuring vital information exchange and inspiring project teams to achieve objectives. You will apply your expertise to mitigate risk, control costs, and ensure quality in a fast-paced environment.

Responsibilities

Project Leadership & Technical Integration

• Lead and motivate project teams (Architects, Engineers, Contractors, Consultants) to achieve project goals.
• Manage the integration of complex manufacturing processes, including planning and installing aircraft tooling and industrial equipment.
• Serve as the primary client contact, managing expectations and ensuring the project aligns with their operational needs.
• Cultivate strong working relationships with peers and external partners involved in the project.

Financial & Contract Management

• Create, maintain, and manage comprehensive project budgets.
• Assist in developing and assembling procurement documents such as RFPs, RFQs, contracts, and exhibits.
• Review and approve invoices, pay applications, and change orders.

Schedule & Documentation

• Support the development and maintenance of master project schedules, ensuring integration between base building construction and equipment installation.
• Prepare and distribute detailed weekly reports, including meeting minutes and task lists.
• Document project progress through regular site photography and field reports.
• Establish and maintain organized electronic project files.

Operations

• Undertake necessary travel to project sites, government offices, and consultant meetings within the Greensboro area.
• Proactively seek guidance (Assistant PMs) or provide mentorship (Senior PMs) to facilitate professional development.

Qualifications

• Education: Bachelor’s degree in Construction Management, Engineering, Architecture, Business Administration, or a related field.
• 10+ years of experience leading complex construction or development projects.
• Experience delivering on time and on budget across multiple 200,000 sq/ft turnkey builds in aviation, heavy industry, general manufacturing, and vehicle manufacturing.
• Technical: Demonstrated familiarity with Project Management methodologies and software, preferably Microsoft Project.
• Communication: Exhibits strong, positive energy and excellent communication skills.
• Experience working with a general contractor, engineering firm, or architecture firm.
• Strong people management and negotiation experience.

Equal Opportunity Statement

Orr Partners LLC is committed to diversity and inclusivity in the workplace. We are an Equal Opportunity Employer.

What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

Job Purpose:

If you are looking for an exciting career in aviation PR with a leader in the Very Light Jet category, this job is for you. The Global Honda Aircraft Public Relations role is a key leadership position responsible for developing and executing strategies that enhance positive global brand recognition for Honda Aircraft through external communications. This role involves daily engagement with global business, aviation, and technology/lifestyle media, communicating the company’s business direction, product offerings, sales initiatives, market expansion strategies, and competitive advantages.

This position operates in a fast-paced, high-pressure environment and often requires urgent and accurate responses during crises to protect the company’s brand image. The Global Honda Aircraft Public Relations professional must provide strategic recommendations and counsel to company executives regarding public responses to sensitive situations.

Additionally, the role serves as a liaison between the sales, product, engineering and manufacturing teams within Honda Aircraft in the U.S. and Honda regions globally, helping to develop comprehensive communication strategies that increase Honda Aircraft awareness.

Key Accountabilities:

• Lead global media relations activities, including timely response to business, aviation, and technology/lifestyle media inquiries, while serving as company spokesperson

• Coordinate message development with internal stakeholders and proactively pitch story ideas aligned with business objectives

• Cultivate and strengthen relationships with national and aviation media

• Collaborate with Corporate, Product PR, sustainability, and related teams to identify storytelling opportunities

• Develop and execute comprehensive media relations plans to support product launches and ongoing initiatives

• Serve as communications lead between the sales, product, and manufacturing teams within Honda Aircraft in the U.S. and Honda regions globally to increase Honda Aircraft positive earned media coverage.

• Manage asset development in partnership with internal Creative Services and develop strategic deployment plans for external stakeholders

• Support executive communications, including speech writing, Q&A development, interviews, and LinkedIn posts

• Provide strategic counsel to executives on communications issues and sensitive matters

• Support external executive communications through speech writing, Q&As, interview faciliation, LinkedIn posts

• Plan and manage corporate media events, including major announcements, trade shows, media roundtables, and media tours

Qualifications, Experience & Skills:

Minimum Education:

• Bachelor’s degree in Communications, Journalism, or related field, or equivalent experience

Minimum Experience:

• 10–12 years of professional experience in public relations.

• At least 10 years of professional experience in aviation or a related field.

• Strong understanding of aviation industries.

Required Skills:

• Strong media relations and public speaking skills

• Ability to clearly articulate commuter jet and/or light jet technical functionality and attributes

• Ability to develop comprehensive communications plans

• Ability to respond quickly and effectively during crises

• Understanding of regulatory environments

• Excellent written and verbal communication skills

• Strong writing and editing skills for press materials and executive communications

• Strong project management skills with the ability to manage multiple initiatives simultaneously

• Creative, innovative, and team-oriented mindset

• Ability to interact effectively with all levels of the organization

• Proficiency in Microsoft Office Suite

What differentiates Honda and makes us an employer of choice?

Total Rewards: 

• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
• Regional Bonus (when applicable)
• Manager Lease Car Program (No Cost - Car, Maintenance, and Insurance included)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability 
• 401K Plan with company match + additional contribution
• Relocation assistance (if eligible)

Career Growth:

• Advancement Opportunities
• Career Mobility
• Education Reimbursement for Continued learning
• Training and Development Programs 

Additional Offerings:

• Lifestyle Account
• Childcare Reimbursement Account
• Elder Care Support
• Tuition Assistance & Student Loan Repayment
• Wellbeing Program
• Community Service and Engagement Programs
• Product Programs

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

The Tactical Buyer will ensure supplier delivery schedules, deadlines, and quotas are met by developing and managing the flow of inbound materials, components, and paperwork to meet production demand. The chosen candidate will analyze, develop and execute appropriate action(s) to solve problems when there is a deviation in meeting production demand. In addition, they will develop and manage the planning and part strategy for a set group(s) or category of parts.

1. Develop and execute part strategies to fully meet production needs.
2. With Strategic Buyer, support the development of supplier strategies.
3. Works in a cross functional team environment as a strong team player and demonstrates ability to work with other functional groups to achieve company-wide goals.
4. Proactively identifies problems in plans, determines required solutions and improvements, and implements necessary modifications to resolve identified issue(s).
5. Responsible for creating visibility of material position (with line of balance reports, material shortage reports, clear to build reports, etc.).
6. Responsible to proactively manage and timely communicate to key stakeholders and departments when production is at risk.
7. Collects and analyzes data regarding efficiency and timeliness of production demands and part delivery schedules.

1. Bachelor's degree in supply chain, logistics or business preferred.
2. High school diploma and 1-3 years of experience in Supply Chain management or related field.

1. Proven ability to produce material line of balance and conduct clear to build reviews.
2. Proven knowledge of Material Planning fundamentals, Plan for Every Part data management.
3. Proven ability to make independent decisions to achieve needed results and drive the necessary actions to closure.
4. Proficient in MRP systems.
5. Prior experience in aerospace or other disruptive manufacturing industries.
6. Ability to read and interpret engineering drawings.
7. Experience with AS9100, US export controls.
8. Excellent organizational and time management skills with a proven ability to meet deadlines.
9. Experienced in developing and presenting a clear and concise proposal.
10. Comfortable working in a team environment.
11. Proactive and self-motivated contributor.
12. Excellent written and verbal communication skills.
13. Excellent time management skills with a proven ability to meet deadlines.
14. Strong analytical and problem-solving skills.
15. Proficient with Microsoft Office Suite.

1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.

The above statements are intended to describe the general nature and scope of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all duties, skills, and responsibilities required of personnel so classified. Duties, responsibilities, and activities may change at any time with or without notice. This document does not constitute a contract between the incumbent and Honda Aircraft Company. (FLSA: ) 01/07/13