Engineering Jobs in Coal Creek Washington
46 positions found
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Air planes is excited to offer opportunities for a Decorative Interior Repairperson to join our Joint and Installation team in Renton or Everett , Washington.
As a Decorative Interior Repairperson, you will be essential in ensuring that our aircraft interiors meet the highest standards of quality and safety.
Your expertise will be vital in identifying and documenting any visible defects during thorough inspections, allowing you to execute precise repairs on interior trim and furnishings.
By utilizing detailed specifications and prints, you will ensure that all materials used are appropriate and effective for the aircraft .
Additionally, you will be required to pass an eye examination for color perception to ensure optimal performance in your role.
Your meticulous approach will involve disassembling components, cleaning surfaces, and applying various finishes to achieve a flawless appearance.
Collaboration with engineering and planning teams will be key as you address any challenges that arise, ensuring that all repairs conform to established procedures and specifications.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities : Obtain work assignments from the team leader or review relevant paperwork to determine tasks.
Perform walk-through inspections of aircraft interiors to identify and document visible defects for repair.
Make repairs to interior trim and furnishings using materials such as plastics, vinyl, and metal, and remove stains or scratches.
Use prints, specifications, and documents necessary to accomplish work effectively.
Obtain and verify kitted repair supplies, ensuring color combinations are suitable for the aircraft .
If supplies are not pre-picked, gather specified materials from storage areas as outlined in installation plans or non-conformance records.
D isassemble defective interior trim parts using hand tools and clean surfaces prior to applying new materials.
Apply potting compounds, primers, adhesives, and special finishes as required by specifications and work orders.
Fit and assemble detail components to repaired parts according to specifications and drawings.
Paint or touch up repair areas using appropriate tools to achieve the desired finish, including mixing and matching paint as needed.
Rework materials per engineering specifications and incorporate changes as needed, including leather repairs and touch-ups.
Remove marks and scratches from metal surfaces using appropriate tools and techniques.
Seal edges of repair areas with color-matched sealant as required .
Consult with engineering, planning, and inspection on job-related issues and contact team leaders or supervisors when assistance is needed.
Document repairs identified by other mechanics and maintain personal certifications as required .
Physical Demands and Potential Hazards : Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job dutie s.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required .
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications : 1 years of experience working with vinyl wallpaper, composites/non-metallic materials .
Experience applying and evaluating decorative paint/ink for color match.
Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all time.
Preferred Qualifications: 1 years of experience with aerospace or automotive spray painting.
Experience working with detailed work instructions or reading and interpreting blueprints and drawings.
Experience with touch-up painting.
Enrollment in a Boeing partnered manufacturing related high school, community and technical college academic program.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace : Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent .
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations .
Pay: $24.32 per hour with potential to earn up to $48.58 per hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
21, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington.
As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations.
This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5” x 17.7" to access the fuel cell.
Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues.
Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction.
Certification for visual acuity and color perception may also be required.
Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding.
Document any discrepancies and report them to the appropriate personnel for resolution.
Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications.
Witness and document functional tests of aircraft components and systems to detect leaks.
Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies.
Maintain personal and tool certifications, ensuring compliance with operational standards.
Assist and train other employees on inspection methods and procedures, providing guidance as needed.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.62 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications: 2 years of experience as a Quality Inspector or in a related inspection role within a similar industry , such as, but not limited to, Aerospace and Manufacturing.
Ability to work in confined spaces (work within or pass through).
Entry diameter 9.5”X17.7”.
Ability to complete Fall Protection Training.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to use a respirator or have been respirator certified.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications: Experience working with precision measuring tools.
Experience sealing Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement: This position is for a variety of shifts.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $27.32 /hour, with potential to earn up to $57.88 /hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug.
31, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.
As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes.
Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards.
To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations.
You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements.
Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Inspect mockups of engineering design changes to ensure adherence to specifications.
Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.
Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.
Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.
Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.
Document discrepancies and report them to the appropriate personnel for resolution.
Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work on-site at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications : 3 years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
3 years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.
1 years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.
Experience as a Quality Inspector.
Experience working with Microsoft Office (Excel, Word, PowerPoint).
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to complete Fall Protection Training.
Preferred Qualifications: Experience inspecting welds / welds certification Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
27, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Aircraft Structures Mechanic to join our Join and Installation team in Everett and Renton, Washington .
As an Aircraft Structures Mechanic, you will utilize your manufacturing knowledge to set up tools and equipment for drilling and fastening complex structures, including composite materials.
You will operate various hand and machine tools, including automated equipment, to perform tasks according to specifications while ensuring safety and quality standards.
Your responsibilities will include recognizing and reporting any equipment malfunctions, performing maintenance, and coordinating the movement of materials and tools.
You will also cut, assemble, and install components, verify your work against specifications, and handle hazardous materials safely.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Review daily reports and consult with team leaders to determine job assignments and obtain necessary documentation.
Locate work areas using specified drawings and paperwork.
Verify kitted parts against installation plans and bill of materials, ensuring they are suitable and defect-free.
Retrieve non-kitted parts from designated areas, ensuring compliance with specifications.
Use electronic devices to access work instructions and engineering data (personal cell phones not permitted).
Select and utilize appropriate hand and power tools for assembly tasks, including precision alignment equipment.
Move kits, carts, and equipment within the work cell as needed.
Load/unload jigs and operate mechanical lifts for assembly work.
Locate tools and parts on aircraft using specified methods and set up assembly tools per instructions.
Handle hazardous materials safely and dispose of them properly.
Inspect completed work for defects and cleanliness before submission for inspection.
Perform minor rework and maintain tool control in accordance with procedures.
Maintain personal and tool certifications and seek assistance from supervisors when necessary.
Set up tools and equipment for drilling and fastener installation in complex structures.
Operate various hand and machine tools, monitoring equipment functionality and performing routine maintenance.
Coordinate the movement and preparation of materials and tools for tasks.
Cut, file, drill, and assemble parts, ensuring proper fitting and quality standards.
Conduct reaming, riveting, and sealing operations, applying corrosion inhibitors as needed.
Utilize calibrated tools to verify work against specifications and ensure quality.
Manage equipment and materials within the work cell to ensure efficient workflow.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.
Failure to complete the assessment will remove you from consideration.
Basic Qualifications : 1 years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.
1 year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.
1 years of experience using high impact vibratory tools; such as bucking/riveting.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to lift up to 35 pounds.
This positions requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications : 1 years of experience performing aircraft structural work or equivalate.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr.
10, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Looking for a 10+ years of experience in full stack software development, including front-end, back-end, and database technologies in Bothell, WA and its an onsite role.
- Bachelor’s degree in computer science, software engineering, or a related field preferred
- Proficiency in modern programming languages and frameworks such as Python, JavaScript, Java, Next JS, Node.js, React js
- Strong working experience with GenAI, LLM Models, MCP, Vector DB, RAG, Vertex AI, Agentic AI frameworks like NGA, ADK or LangChain/LangGraph, creating AI agents.
- Strong experience with Cloud platforms like GCP, Azure or AWS and cloud technologies like OpenStack, Terraform, Ansible or Chef
- Experience working with LLM observability, analytics, evaluations, testing and annotation using tools like LangSmith, LangFuse, Streamlit, Arize or similar tools.
- Strong experience working with AI/ML development
- Strong experience working with Databases like Cassandra, MongoDB or similar.
- Strong understanding and working experience of microservices architecture, RESTful APIs, Caching and related technologies
- Familiarity with containerization and orchestration tools such as Docker and Kubernetes
- Proficiency in version control systems like Git, and experience with CI/CD tools such as Jenkins, GitHub, Maven, Nexus, JFrog or Sonar
- Strong experience in Unit and Function testing using Junit, Mockito/JMock, Selenium, Robot, Cucumber, SoapUI or Postman
- Strong problem-solving, analytical, and debugging skills.
- Excellent written and verbal communication skills, with the ability to effectively communicate complex technical concepts to both technical and non-technical audiences.
- Demonstrated experience in mentoring and providing technical leadership to other engineers.
- Nice to have skills:
- Google CCAI platform (DialogFlow), Vertex AI, Graph QL, BigQuery, Conversation Graph, LLM as Judge
Overview
Addison Group is representing a growing PE backed construction and infrastructure services firm in the Everett, WA area, specializing in industrial, infrastructure, commercial, and data center projects. The company is seeking an experienced Controller to lead its accounting function, support continued growth, and partner closely with executive leadership and CFO on financial strategy, reporting, and operational excellence.
Key Responsibilities
- Oversee all accounting operations, including general ledger, job cost accounting, AP/AR, payroll, fixed assets, monthly/annual close, and HR
- Prepare monthly, quarterly, and annual financial statements and management reporting packages
- Improve accounting policies and procedures and implementing efficient processes
- Serve as the internal owner and subject matter expert for the company's ERP system
- Internal owner of payroll, financial systems and HR benefit administration, ensuring scalable infrastructure to support the company's growth
- Oversee HR administrative functions including payroll coordination, benefits administration, and employee onboarding/offboarding
- Lead external audit, tax, and insurance processes; serve as primary liaison with external auditors and advisors
- Support operational teams with financial insights related to project performance, margins, and risk
- Evaluate and improve accounting systems and processes to support scalability and efficiency
- Ensure compliance with state, and local tax regulations and data
Leadership & Team Development
- Develop, mentor, and supervise the accounting team of 5, fostering a high-performing and collaborative environment
- Establish clear goals, performance metrics, and professional development plans for direct reports
- Build scalable accounting processes and organizational structure to support company growth
Qualifications
- Bachelor's degree in Accounting, Finance, or Economics required
- Minimum of 10 years of progressive accounting experience
- Understanding of commercial construction, manufacturing, engineering, electrical, HVAC or project/cost related industry a plus
- Proven experience developing, leading, and managing an accounting team
- CPA, Masters, or past public accounting experience a plus
- Possess advanced Excel skills and high proficient with ERP systems
- Excellent leadership, communication, and cross-functional collaboration skills
- Ability to operate both strategically and hands-on in a growing organization
This position offers a salary range of $180,000 to $195,000 base depending on experience.
Discretionary bonus. Medical, dental, vision, 401K match, holiday pay and PTO.
100% in-office position.
Technical Designer
Everett, WA/ Seattle, WA/ Auburn, WA/ Renton, WA/ Portland, OR
Onsite
Technical Designer
- Applies fundamental drafting principles and design concept understanding to support solutions to product/process issues as they occur real-time in the fabrication flow. Create drafted parts and product structures to support operational and quality concerns.
- Performs model definition changes within the defined engineering based on engineering input. Translating the engineer's conceptual ideas and feedback into physical part geometry and assembly definition.
- Engages in cross functional, collaborative environments across the life cycle of the products to support design change and improvement.
- Maintains technical excellence in performing work with career intent to progress into technical designer job role.
- Participate and have the ability to learn in the real-time, fast pace, agile environment with a positive attitude. Work may be first, second, or third shift within a standard or alternate work week; as well as some weekend and/or daily overtime
Position Responsibilities:
- Provides materials and process support to and systems design teams throughout the full life cycle of the airplane from design to production to fleet support. Activities include definition of electrical, electronic, and electromechanical components used across products.
- Reviews electrical component materials and process specifications and other engineering documents used to control design, certify and produce systems hardware.
- Identifying impacts of non-conformances associated with electrical components and corrective/preventative actions for future avoidance.
- Conducts engineering lab / failure analysis to help determine cause and corrective action of failed electrical components
- Leads in evaluation of emerging technologies for potential application to future BCA products enabling a competitive advantage.
- Leads or collaborates with multiple engineering teams, Design, Stress, Quality, Manufacturing, and Suppliers to solve a variety of materials and process challenges throughout the full life cycle of the airplane.
- Produces requirements, specifications and other documents to manage the deployment of tools, equipment, materials, parts and processes used to enhance the full life cycle.
Basic Qualifications:
- Associate degree and typical experience in drafting classification (or combination of education and experience), basic understanding and usage of computer aided design, basic understanding of design product structure (details, parts, assemblies, installations), understanding in machining of metallic parts.
- 9+ years of experience working with aerospace design, including experience working with detail and assembly parts
- CATIA or equivalent solid modeling experience
- Integrated Visualization Tool (IVT) use and experience
Preferred Qualifications:
- Problem solving skills
- Investigative skills
- Multi-tasking skills
- Project management experience working with projects at various stages and coordinating with multiple organizations
* Experience working in lab environments
Education / Experience: AA degree in related discipline and typically 9 or more years of related experience or an equivalent combination of education and experience
Description
Amazon Leo is Amazon's low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.
We are seeking a talented and motivated Production Supervisor to lead production operations at Leo. Anticipated working hours for this position are Wednesday - Saturday, 6 AM - 4:30 PM (4/10s).
Key job responsibilities
* Hire, develop and supervise leads and a large group of highly skilled technicians focused on Kuiper satellite production. Includes annual reviews, career development and managing corrective and disciplinary actions.
* Coordinate with other Kuiper leaders and manufacturing engineers to plan and coordinate daily tasks for technicians and activities of all operations with an ability to adapt to changing schedules and other dynamic priorities.
* Establish on-the-job training programs and standardized opportunities for team members to learn new skills and progress in their career.
* Independently perform integration and test of the Kuiper satellite and various complex subassemblies in a cleanroom and ESD controlled environment.
* Inspect and verify your team's work after completion to ensure engineering and quality standards are met.
* Author, maintain, and train others to all relevant process documentation, including Assembly, Inspection, Testing/In-Process Characterization, and Packaging Procedures.
* Collaborate with manufacturing, design, operations and test engineers to develop, document and complete activities, including continuous improvement opportunities
* Provide frequent feedback and technical reviews on designs, processes, tools and custom equipment used in production environments.
* Improve and enforce area safety and reporting mechanisms through regular auditing and safety-related projects.
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
A day in the life
The Production Supervisor will work closely with cross-functional engineering, test, enterprise, quality and operations teams on production hardware integration processes and systems. This is a critical role leading the technician team on the production floor.
This position requires a high degree of skill in many areas, including technical leadership, technician development, mechanical assembly, avionics integration, troubleshooting, electrical checkouts and environmental testing. In short, you will be responsible for ensuring high quality, workmanship and safety standards are adhered to on a daily basis across the technician team. You will also help lead long term production planning, team organization, team building and hiring for essential roles across your team.
About the team
We are a fast-paced, data-driven team working with leaders in multiple technology areas to deliver the best product for our customers. We hold each other to relentlessly high standards, and constantly look for ways to improve the product's performance, quality and cost. We are motivated by technical challenges and want individuals who are excited for the fast pace of production.
Basic Qualifications
* 2+ years of team leadership experience
* 5+ years of hands-on experience in mechanical or electrical hardware assembly, test, and/or installation
Preferred Qualifications
* Experience hiring and leading a high-performance team
* Experience leveraging technology and implementing lean principles / Six Sigma methodologies to drive process improvements or equivalent
* Experience working in a fast-paced, rapidly changing operations environment
* Experience leading engineering teams as a mentor or tech lead, or experience leading and influencing your team or organization
* Experience helping develop enterprise manufacturing systems and/or assembly lines.
* Experience working with FOD, ESD sensitive hardware and clean room requirements.
Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at , WA, Kirkland - 100, ,000.00 USD annually
Crane Aerospace and Electronics has an exciting opportunity for a Production Supervisor II at our Lynnwood, WA location.
About Crane:
Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). Located in the epicenter of United States aviation manufacturing, our Crane Aerospace & Electronics Lynnwood, Wash., facility delivers industry-leading aerospace & defense power and fluid solutions. Our products are rugged enough to fly 5 billion miles from Earth on NASA's New Horizons spacecraft and innovative enough to be featured on Eviation's Alice all-electric aircraft. You'll join a group of aerospace professionals committed to engineering excellence and work in a community tucked between the idyllic Puget Sound and Cascade Mountains. Start the next chapter of your career with Crane Aerospace & Electronics!
Job Summary:The Production Supervisor II leads and directs a team of employees in an assigned area of operations such as Metal Fabrication, Assembly, and/or Test. The Production Supervisor II is accountable for maintaining a safe working environment and adhering to quality standards and is responsible for meeting customer demand schedules within established cost goals. Supervision may include the management of employees on more than one shift.
Essential Functions:- Identify and use lean manufacturing tools required to drive improvements and mentor teammates in the use of these tools
- Provide inputs (resource planning, overtime projections, productivity improvements) to management to develop monthly and annual budgets
- Assist Value Stream Managers with required monthly reporting to senior level management
- Review and understand daily key performance indicators to evaluate the current status and gap to plan, and use this data to drive daily problem solving (8 Step, 5 Why, Cause and Effect, Fishbone) where required
- Ensure timely identification of quality issues through the use of the non-conforming materials process to ensure scrap and rework are properly processed
- Serve as liaison to other groups, product lines and/or functional areas to ensure products are built, assembled, and/or tested within appropriate parameters
- Review the daily allocation of resources in order to drive production schedule to meet established customer requirements
- Make staffing decisions in accordance with human resource procedures to build and grow the team to meet the needs of the business
- Develop, coach, and mentor employees through the use of performance planning to drive employee and business growth
- Any other task assigned by supervisor or management
- Provide input to and collaborate with Engineering and Quality to define and modify manufacturing instructions
- Use standard supply chain processes and partner with the Supply Chain team to develop material replenishment system for the manufacturing areas
- Ensure equipment complies with calibration and maintenance procedures and requirements
- Experience: 3+ years supervisory experience; 5+ years of experience in the field or in a related area
- Knowledge: Deep understanding of cellular manufacturing practices; Comfortable teaching the use of manufacturing based continuous improvement skills (standard work, 5S, material replenishment, etc.); Intermediate skill level with MS Office software
- Skills/Abilities: Effectively communicate (written and verbal) with all levels of the business and present to groups both small and large; Ability to align customer demand with manufacturing capacity to develop labor planning/allocations; Ability to use data to determine root causes of issues to drive focused corrective action
- Education/Certification: Bachelors Degree
This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR).
Working Conditions:- Standard office environment
- Working conditions are normal for a manufacturing environment
- Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE
- May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes
- Requires work with small to medium size hand and power tools
- Occasional travel to customer and outside test lab facilities for technical interchange meetings, design reviews, product testing support, and to attend technical seminars
- May need to travel domestically and internationally (up to 10%)
- Standing: 10% *percentage is approximate and may vary depending on work task
- Sitting: 90% *percentage is approximate and may vary depending on work task
- Lifting (in pounds): up to 20 pounds
- Pushing (in pounds): up to 20 pounds
- Mental/Visual: use of computer, calculator, filing cabinets
- Workspace: cubicle/desk/lab
Salary range: $103,209.60 to $133,785.60. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs.
As a team member at Crane Aerospace and Electronics, you'll enjoy:
- Benefits: Health care, dental or life insurance starting the first day of the month
- Time Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.
- 401k Retirement Plan: 401k plan with company match
- Education Reimbursement: eligible after 90 days of employment
You can see a list of our benefits at or visit our website at for more information on our company and great opportunities.
In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool.
This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.
Crane Company is an Equal Opportunity Employer and does not discriminate on the basis of race, color, creed, religion, sex, national origin, marital status, age, sexual orientation, gender identity, disability, pregnancy, medical condition, genetic information, protected veteran status or any other characteristic protected under federal, state, or applicable local law.
Job Title: Support Engineer
Location: Seattle, WA / Bothell, WA (On-site)
Job Type: Full-time
About Us:
Cinnamon is a forward-thinking healthcare technology company focused on empowering patient advocates through innovative solutions. By automating critical processes, we help healthcare organizations secure financial assistance for their patients efficiently and securely. Our mission is to improve healthcare accessibility while maintaining the highest standards of data integrity, compliance, and customer trust.
Role Summary:
We are seeking a skilled Support Engineer to lead technical support efforts for healthcare customers and internal Cinnamon users. This role partners closely with engineering, product, implementation, clinical operations, and security teams to resolve complex issues, improve system reliability, and deliver a high-quality user experience across the platform. You will handle escalations, guide support processes, and contribute to a strong operational and security posture. The ideal candidate excels at cross-functional troubleshooting, clear communication, and customer empathy.
Key Responsibilities:
- Own customer support issues end to end and ensure timely, accurate resolutions
- Support customer onboarding by validating configuration, reviewing workflows, and preparing customers for go-live
- Deliver advanced training and create materials that help clinical and administrative teams adopt the platform effectively
- Serve as the escalation point for Jira Service queues and guide triage and prioritization
- Provide advanced support to internal users across authentication, access, feature flagging, analytics, logging, VPN, GitHub, password management, and productivity tools
- Investigate and resolve issues across GCP services, , Auth0 flows, LaunchDarkly configuration, Mixpanel events, NordLayer access, GitHub permissions, 1Password access, and related systems
- Maintain and improve documentation in Confluence, including workflow diagrams, runbooks, SOPs, and troubleshooting guides created in Lucidchart
- Perform proactive system monitoring using GCP logs, , uptime indicators, and automated alerts to detect and address issues early
- Reproduce issues, validate fixes, analyze root causes, and collaborate with engineering to improve reliability and data integrity
- Ensure support follows HIPAA-aligned privacy, security, and data handling requirements
- Surface findings from Intruder and SecurityScorecard and track remediation with security and engineering teams
- Identify recurring patterns in support tickets, propose workflow and product improvements, and contribute insights to roadmap discussions
- Mentor junior support engineers and help develop team best practices
- Participate in incident response efforts for issues affecting multiple customers or systems
Required Qualifications:
- 4-6 years of experience providing technical support in a SaaS, healthcare, or cloud-based environment
- Proven experience supporting healthcare customers or healthcare data workflows
- Experience owning escalations and complex troubleshooting efforts in coordination with engineering or product teams
- Proficiency with Jira Service Management for issue triage and workflows analysis
- Experience supporting enterprise SaaS platforms for authentication, identity management, analytics, logging, VPN access, and secure productivity operations
- Hands-on experience with Google Cloud Platform logs, error reports, service metrics, or interactions with Cloud Run and Cloud Functions
- Strong understanding of QA processes, root cause analysis, and cross-environment troubleshooting
- Excellent communication skills with the ability to explain technical issues to non-technical healthcare users
- Strong documentation skills maintaining shared knowledge bases or support playbooks
- Comfort handling workloads involving sensitive healthcare information and security-related tasks
Preferred Qualifications:
- Scripting or automation experience in Python, Bash, or PowerShell
- Familiarity with HL7, X12, FHIR, or common healthcare data exchange patterns
- Experience supporting customers during EHR integrations or workflow onboarding
- Experience with remote support tools such as TeamViewer or AnyDesk
- Experience building documentation or diagrams in Confluence and Lucidchart
- Exposure to security monitoring tools or vulnerability management processes
- Prior mentorship or leadership experience in a support environment
What We Offer:
- A competitive salary and stock options grant
- Holiday schedule according to your country of residence and PTO
- An innovative and high-paced work environment with a flat management hierarchy
- Opportunities for professional growth and advancement in a rapidly scaling company
How to Apply:
Send your resume and a cover letter detailing your relevant experience and interest in the position to We look forward to reviewing your application and exploring how you can help us advance healthcare through innovation and technology!
Join us in transforming healthcare through innovative technology!
